Download - Virago Enterprise Business Profile Nov 16
Virago Enterprise Pune
Business Profile
Virago Enterpr ise , Pune
1. Metallurgical Consultation2. Tailor-made Product/Process
Development3. Training and placement in Metallurgy4. Technical writing/ Intellectual
Property Rights 5. Mentorship for Business Start-up6. Business Liaison
Services offered
1. Process Optimisation/ New process development : Foundry, Heat treatments, Rolling, Forging, Extrusion, Wire drawing and Welding.
2. Material development: Steels, Al- Alloy, Magnesium alloys, Bimetallic Materials, Weight reduction
3. Research Areas: Thermo-mechanical Processing, (TMP) Severe plastic deformation, Super plasticity, Carbon fibre composites.
4. Failure investigation: Fatigue, Creep, Wet and High temperature corrosion, Warranty claims
1. Metallurgical Consultation
5. Laboratory Testing and Lab setup: Metallography/ Physical, Mechanical Testing, Lab setup- Mechanical testing, Metallography, Chemical Laboratory, Wavelength-dispersive (WD) and Energy dispersive (EDS) X-ray spectroscopy, Advanced testing: Fatigue, Creep, XRD, SEM, EBSD, Wet, Room temperature and high temperature Corrosion.
6. Plant setup: Steel making/ Secondary Steel Making/Foundry (Iron, Steel and Al base and Copper base casting) / Forging (Open die forging): Feasibility report , Setting up of Steel melting shop, Process stabilization/ Assistance in troubleshooting/ Processing of Flat/ bars products: or cold rolled steel sheets
1. Metallurgical Consultation ...contd.
1. Tailor-made solution for Foundry/ Rolling/ Forging/ Extrusion/ Wire drawing/ Welding/ Heat treatments
2. Design and fabrication of special purpose machines for metallurgical process and control
3. Design and development of pilot plant, Thermo-mechanical simulator, Modification in existing equipment/ Very high/ low temperature/ Vacuum furnace equipment
4. Data acquisition/ / Process control / Digital manufacturing/ Automation/
5. Weight reduction/ Rejection control/ cost cutting/ process stabilization
2. Tailor-made Product/Process Development
6. Plastic moulding/ Forging, Die design, (ProE, Solid works, Actual machining/ heat treatment of dies/ Coatings for dies).
7. Use of NDT methods and to find crack, porosity, young's modulus, Strength etc (FEM, artificial neural network, resonance frequency)
8. Laser quality control 9. Near net shaping by Laser, 3D printing, welding,
Resistance butt welding, Bimetallic (layered) castings.
2. Tailor-made Product/Process Development ...contd.
Training in Metallurgy for Beginners to Advanced LevelHands on Training/ Workshop
Brain storming sessions for R&D personnel Placement services to Fresher/ Experienced
Metallurgical Engineers
3. Training and Placement in Metallurgy
Virago Enterpr ise , Pune
Literature SurveyConference/ Journal paper
Technical report Technical proposal
Patent writing
4. Technical writing/ Intellectual Property Rights
Virago Enterpr ise , Pune ( India)
Feasibility / SWOT analysis Forthcoming Trends/ Technologies in market
Making Business modelMaking Technical and Financial Proposal
Funding from Govt/ Private agenciesIdentifying raw material/ equipment suppliers
Setup of plant/ process/ equipmentStabilization and Quality control
5. Mentorship for Business Start-up
Virago Enterpr ise , Pune
Networking of buyers/ suppliersIdentifying quality/ cheaper source of engineering
supplyBusiness Liaison related consultation
6. Business Liaison
Virago Enterpr ise , Pune
Virago Enterprise is run under the entrepreneurship of Mr. Vidyanand S. Galphade. He is a B.E. Metallurgy from College of Engineering Pune and M.Tech Metallurgy from IIT Kanpur.
He has more than 13 years of total work experience. Out of this He has 5 years of Industrial R&D experience, where he was a part developing 3000 square meters R&D Centre. Recently he served as an Assistant Professor in Metallurgy and Materials Science at College of Engineering Pune from 2009 to 2016.
During his tenure at COEP, he initiated many Training courses/ Workshops for Industry personnel. He also served nearby Industries by offering Metallurgical consulting service. Few of his skill sets are Metallography, Mechanical testing, Failure Analysis, Weight Reduction and Thermomechanical processing. Along with steel especially spring steel, he also worked on 2xxx, 6xxx aluminium alloys Mg-Zn-Zr-RE alloys. He wrote few technical papers and one patent.
About the Proprieter
Virago Enterpr ise , Pune ( India)
(1) Layered Casting/ Bimetallic Brake drum
Glimpses of R&D/ Technologies development work in Past
Cast IronAl- Alloy
(a) Bimetallic brake drums (b) Microstructure of Bimetallic Brake drum at interphase
(2) Failure Analysis of Fan Blade
(a) Broken fan blade (b) Corroded portion nearby rivet
Glimpses of R&D/ Technologies development work in Past
(b) Failed shaft(b) Failed Rotor Shaft Assembly
(2) Failure Analysis of Steam generator Shaft (150 m dia)
Glimpses of R&D/ Technologies development work in Past
User got useful warranty replacement of rotor shaft assembly!
Metallurgical Testing
(b) Flow lines (Macro Etching)(b) Micro Hardness (Vickers)
Training/workshop conducted..• IIM Pune Chapter “Recent Trends and Advances in Forging Industry” as Co-Convener- Sep 2015• Training/workshop for John Deere Pvt Ltd Pune – 2014 as a Convener
Workshop on “Recent Trends and Advances in Forging Industry” 2016
Training/workshop for John Deere Pvt Ltd Pune – 2014
AddressVirago Enterprise,
PAP/ J-80, Next to Shreeji Enterprise, Behind Swami Samarth Weigh Bridge,
Indrayani Nagar Rd, MIDC, Bhosari,Pune -411026, Maharashtra, India
Registered OfficeA-103, Tanish Sanskrit, SN 219, Dighi Road, Bhosari, Pune-411039, Maharashtra, India
[email protected]@gmail.com
Telephone+91-7387134246
Contact
Virago Enterpr ise , Pune ( India)
Thank you!