VALVES AND COMPONENTS FOR LPG AUTOMOTIVE AND FORKLIFT APPLICATIONS
ALL RIGHTS OF CHANGE RESERVED
AUTOMOTIVE TANK EQUIPMENT
MULTI VALVES:
A615 A6155
Multivalve for Automotive applications
Solenoid Service valveManual shutoff valve for servicingFloat Level gauge with resistive remote readoutQuick filling with automatic 80% fillstopWith PRV (pressure relief valve)
Filling: Elbow ½" SAE Elbow for tube Ø 8mm Elbow for tube Ø 10 mm)
Outlet: Straight for tube Ø 6mm Elbow for tube Ø 6mm Straight for tube Ø 8mm Elbow for tube Ø 8mm
R67.01
Caravan version with automatic fill-stop (for self-filling) Multivalve for vertical use
Manual shutoff valve for servicingFloat Level gauge with direct readingQuick filling with automatic 80% fillstopWith PRV (pressure relief valve)
Filling: Elbow ½" SAE
Outlet: Straight 21,7 x 1/14” left si Elbow 21,7 x 1/14” left si Elbow W21,8 x 1/14” left
R67.01 + CE
MULTI VALVE ACCESSORIES
Many accessories are available for the multivalves such as: elbows, gastight housings, protection housings, different coils, cables...
GASTIGHT BOXREF 019905040
PROTECTION BOXREF 019906023
COIL WITH AMP PLUGREF:018311029
6M EXTENSION CABLE WITH 1 AMP PLUG
REF:019906014
6M EXTENSION CABLEFOR SENSOR
REF:019906035
3
ALL RIGHTS OF CHANGE RESERVED
SOLENOID VALVES
SAFETIES + PRD
New reference Tank connection Outlet connection Voltage Design approval
A1500 ¾" NPT 5⁄16" SAE 12V R67.01/CE/UL/CSA
A1501 ¾" NPT ¼" SAE 12V R67.01/CE/UL/CSA
A1520 Flange 7⁄16"-16 UNF-2B(F) 12V R67.01
A1550 ¾" NPT ¼" SAE 12V R67.01
A1551 ¾" NPT 5⁄16" SAE 12V R67.01
A1572 ¾"-14 NPTF-2 3⁄8" SAE 12V UL US & Canada
Other outlet on request Optional: 24V coil
New reference Tank connection Outlet connection STD Flow capacity in AIR Key wrench size Design approval
A1402 1"-11,5 NPT 1"-20 UNEF 27 bar 26 Sm3/min 36mm R67.01 / CE
A141 ¼"-18 NPT M16x1 30 bar - 19mm -
A142 1"-11,5 NPT - 120° 448 Sm3/h HEX 42 R67.01
A1440 ¾"-14 NPT - 27 bar 21,8m3/min HEX 27 R67.01
A1441 Flange - 27 bar 21,8m3/min - R67.01
A1450 ¾"-14 NPTF-2 ¾"-20 UNEF 375 psi 380 SCFM HEX 27 UL / CE
A1451 ¾"-14 NPTF-2 ¾"-20 UNEF 312 psi 710 SCFM HEX 27 UL
A146 1"-11,5 NPTF-2 1"-20 UNEF 312 psi - 2151 kpa 1412 SCFM - 666,4 dm3/s HEX 33,5 UL
A146 1"-11,5 NPTF-2 1"-20 UNEF 27 bar 31m3/min HEX 33,5 R67.01
A146 1"-11,5 NPTF-2 1"-20 UNEF 375 psi 1424 SCFM HEX 33,5 UL
A146 1"-11,5 NPTF-2 1"-20 UNEF 17,2 bar 24m3/min HEX 33,5 CE
NORMAL FLOW HIGHT FLOW
A150x A1520 A155x A1572
SAFETY RELIEF VALVES
A1402 A141 A142 A1440 A1441 A145x A146x
4
ALL RIGHTS OF CHANGE RESERVED
AUTOMOTIVE TANK EQUIPMENT 80% FILL STOP VALVES
ZERO VOLUME ADAPTERS
Minimun Delta Pressure for opening: 1 bar
- Very low pressure drop through the valve with increased flow capacity during filling
- Can be mounted at any position between 0º (top) and 180º on the tank - Designed for use on all tanks between 200mm and 600mm diameter - High repetitive filling precision is ensured under extreme working pressure and temperatures
- Leakage is minimized after cut-off of the 80% Fill-Stop far less than R67-01 and UL requirements
Electronic level gauge with solenoid 80% fill stop. No more moving parts, fully electronic for most precise level indication and fill stop shut off. No more noises from moving parts, very flexible configuration.
Simply replaces float level gauge and 80% fill stop on a 4-5 hole cylinder
Zero volume adapter reduce gas release when decoupling the filling nozzle to a minimum. Zero volume adapters are only helpful if they stay permanently installed. Directly connects to 3/8" NPT filling inlet (for example on A100 or A6155, etc)
DISH
3⁄8" NPTREF: 019601041
ACME
3⁄8" NPTREF: 019601042
EURO CONNECTOR
3⁄8" NPTREF: 019511003
BK
3⁄8" NPTREF: 019601044
El l l h
AUTOMOTIVE TANK EQUIPMENT 80% FILL STOP VALVES
A100 - A101 A104 - A105 A110 - A111 A112 - A113 A115
ELG 80%
New referenceConnection "C"
to containerConnection "A"
to inletAdapter
preparationVersion Remarks
A100 - A101 ¾"-14 NPT ½" SAE - 90° elbow NO R67.01/CE/UL/CSA -
A104 - A105 Flange ½" SAE - 90° elbow NO R67.01/UL -
A110 - A111 ¾"-14 NPT 1 ¾"- 6 ACME NO UL/CSA Plastic cap
A112 - A113 ¾"-14 NPT 1 ¾"- 6 ACME W21.8 RH R67.01/CE Brass cap
A115 ¾"-14 NPT Bayonnet W21.8 RH R67.01 -
Approvals: R67.01
Gauge and resistive read-out for Livello compatible systems
Hall sensor for electric remote readout
5
ALL RIGHTS OF CHANGE RESERVED
SERIES A 190 | LEVEL GAUGES
KEY FEATURES
- The ELG is a solid state, capacitive level probe for Automotive LPG tanks
- It features a new flexible, robust and reliable level indication concept without any moving parts
- The ELG have the measuring converter outside the pressure of the tank and the measuring converter is replaceable without emptying the tank
- The converter has a wide operating voltage (6-16V) and is fully protected against typical (automotive) overvoltage, wrong connection and polarity exchange
- Electronic Level Gauge (ELG) for LPG application with replaceable electronics
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Type of gas LPG (propane, butane or mixture of these 2 gases)
Working pressure 30 bar
Maximum working pressure
acc. R67: 67,5 bar
Working temperature
-20°C / + 65°C
Connection to the tank
Junior head with 4 screws
Typical characteristics (PWM-voltage
Empty = 0,5V. Half = 2,5V. Full = 4,5V.
Approvals: R67.01
SERIE 487 JUNIOR FLANGED HEAD | LEVEL GAUGES
KEY FEATURES
- Head: forged brass junior 4-bolt - Dial: direct-read dial (various, remote read-out) - Gasket: flat seal NBR - Float: NBR foamed (closed cell) - Optional: zinc or plastic protection cap
- For all standard tanks with junior adapters. These gauges can be top, side or angle mounted
Straight for tube dia. 8mm
Dish (without thread)BK
Angled with ½ SAE
ACME
Straight for tube dia. 8mm
W 21.8
Straight with ½ SAE
Euro connector
Please refer to filling valves + adapter catalog for all references
Euro connector - M10x1.5REF: 019511039
Straight for tube dia. 8mm(REF: A13610000)/10mm(REF:
A13600000) +
Light filler valve for Europe comes with cap and mounting accessories
Straight ½ SAE+
Light filler valve for Europe comes with cap and mounting accessories
REF: A13620000
Euro connector - M10x1.5REF: 019511009
6
ALL RIGHTS OF CHANGE RESERVED
AUTOMOTIVE REMOTE FILLING EQUIPMENT
REMOTE FILLING VALVES
Light filler valve for Europe and direct adapters
M16X1,5 OUTSIDE
M10X1,5 INSIDE
M16x1,5Long
REF:019511015
DishREF: 019511006
ACMEDish
REF: 019511006
Euro connector M33x2REF: 019511012
ACMEREF: 019511005
M16x1,5Short
REF:019511014
7
ALL RIGHTS OF CHANGE RESERVED
Special versions of filler valves
Raised W 21.8 - ½ SAEREF: A13510001
Euro connector1"¼-11.5NPT
REF: A13594000
Dish (without thread) no flange½ SAE
REF: A13500002
REMOTE FILLING VALVES ADAPTERS
ACMEREF: 019511041
DishREF: 019511042
BKREF: 019519003
European connectorREF: 01951103
W 21,8
8
ALL RIGHTS OF CHANGE RESERVED
ACCESSORIES
BOX FOR FILLER VALVE
CAPS
KEY OF MOUNTING AND DISMOUNTING
M33x2 / flat surface • REF: 016301029
COMPLETE KIT
Dish filler valve kit • REF: 019901029
- Box without key for filler valve BK REF: 019909057
- Box without key for filler valve ACME REF: Y78100000
- Box with key for filler valve ACME REF: Y78100001
PRODUCTS AND SOLUTIONSFOR FORKLIFT TRUCKS (LPG)
10
ALL RIGHTS OF CHANGE RESERVED
FORKLIFT EQUIPMENT
QUICK AND SIMPLE INSTALLATION:
1) Position the MLD as close as possible to thegas cylinder2) Fix the MLD in an upright position3) Connect the LPG fuel lines to the MLD(Flow can go in either direction)4) Connect the Alarm lamp on the dashboard5) Join the electrical connectors
Use 100% of the LPG you paid for. With the MLD you no longer have to exange the bottle at the beginning or at the end of the shift. no more unexpected stalling. Reduced maintenance costs due to faulty starter. reduction of possible accidents caused by engine stalling. 23% Higher. Efficiency, 12% less Standing Still, 5% lower maintenance. (Average values)
Easy to assemble, the kit includes all necessary parts. The MLD is not a pressure sensor with only a few seconds of pre-alarm. This CE approved and patented sys-tem gives a sufficient warning time so that you can still drive to the storage facility.
MORE INFOSwww.rotarex.com/MLD
+23%PROPANE ECONOMY
-12%DOWNTIME
+SAFETYFEWER ACCIDENTS
100%RELIABLE
Until now, there has been no reliable way to know how much propane remains. Cylinders are changed arbitrarily, leaving up to 23% of the LPG unused.
12% of propane forklift downtime is due to running out of gas. MLD alerts drivers when it is time to complete a task and exchange cylinders.
Propane forklift safety is increased since forklifts will not run out of gas in the middle of a job. Hauling heavy cylinders and towing forklifts is eliminated.
Proven, patented, certified technology makes MLD the only low propane gas gauge that is completely reliable in all conditions.
NEW
http://rotarexmld.com
11
ALL RIGHTS OF CHANGE RESERVED
FORKLIFT TANK EQUIPMENT
MULTI VALVES:
A6155 SRG458
A6155 Multivalve FLT version with 80% FILL-STOPfloat level gauge Integrated Fillingport 1 3/4 -6 ACMEManual shutoff valve for servicingQuick filling with 80% fillstopWith PRV (pressure relief valve)Horizontal or vertical use
Compact multifunction valve for FLT applications in composite cylinders. Inlet M34x1 or 1 1/4” NPTCan be used in liquid phase or vapour phaseintegrated Fillingport 1 3/4 -6 ACMELiquid/vapor service outlet 3/8“-18 NPT with handwheelFixed Level GaugeWith PRV (pressure relief valve)
The all NEW Multivalve for Forklift applications eliminates the need for a complex steel/aluminium cylinder layout with multiple couplings and various metal tubes (manufacturing costs, leak possibilities). The FLT Multivalve combines all functions into just one valve while still allowing repair and service of the individual product features (PRD, Filler Valve, Male Connector etc.) Quicker, simpler installation, less leak risks, automotive proven technology, same simple use as before
12
ALL RIGHTS OF CHANGE RESERVED
FILLER VALVES
FIXED LEVEL GAUGES
KEY FEATURES
- Easy repair or replacement of upper fill assembly without - Emptying container - Quick filling capacity
KEY FEATURES
- Fixed liquid level gauge with or without diptube - Large knurled knobs, cannot be lost
New reference Tank connection Inlet thread Design approval Remark
A120 ¾"-14 NPT 1 ¾"- 6 ACME R67.01 / CSA Plastic CAP or brass CAP
A120 ¾"-14 NPTF-2 1 ¾"- 6 ACME UL Plastic CAP
A121 ¾"-14 NPT ½" SAE R67.01 / UL -
A122 ¾"-14 NPT Bayonnet R67.01 Adapter thread W 21.8 RH
A124 ¾"-14 NPT 3⁄8" SAE UL -
New reference Tank connection Outlet connection Design approval
A170 ¼"-18 NPTF-2 - UL/CE
A171 ¼"-18 NPTF-2 3,5 mm UL/CE
A171 ¼"-18 NPTF-2 R1⁄8" UL/CE
A171 ¼"-18 NPTF-2 ¼"SAE UL/CE
obs, cannot be los
FORKLIFT TANK EQUIPMENT (continued)
- Suitable for all DOT lift truck cylinders
- Suitable for all DOT lift truck cylinders
13
ALL RIGHTS OF CHANGE RESERVED
INSTALLATION POSSIBILITIES
Furthermore we have the full range of equipment
for LPG FLT Tanks & Cylinders
SRG 453-251-1001 / A160-1008 A165 A180 100000 / A 180 000011
Service Valve
Inlet ¾”
Outlet 3⁄8”-18 NPT
Further models are also available
Inlet ¾”- 14NPT
Outlet SAE
UL and or CE
ACME Coupling
(Female)
Inlet 1 ¼” F ACME
Outlet 1 ¼” F NPT
ACME Coupling
(Male)
Inlet 3⁄8” F NPT
Outlet 1 ¼” M ACME
A112 / A110 481-015-2001
Fillstop Valve
Inlet ¾”, Outlet 1 ¾” - 6 ACME,
Brass Cap for Tank-Diameter 265-37, position- 45-52
Brass Cap for Filler Valve
with strap
Connection 1 ¾-6 ACME
A140 SRG 491-015 A145 A146
Safety Valve 1” – 27 bar
with red cap
Safety valve,
inlet ¼” NPT
Set Pressure 400 PSI
(27,6 bar)
Internal Relief Valve
Inlet ¾” NPT
Internal Relief Valve
Inlet 1” NPT
1
3
4
2
1 2
3
A170
Fixed Level Gauges
¼” -18 NPTF-2
Tank connection
Please ask for further Catalogues on this range of equipment
SRG487
SRG produces a full range of different
models, sizes, angles and lengths; also
available with digital output
4 5
ACME Coupling
1
23
5
4
FORKLIFT TANK EQUIPMENT
14
ALL RIGHTS OF CHANGE RESERVED
¾"-1" THREADED GAUGE
KEY FEATURES
- Head: forged brass - Dial: direct-read dial (horizontal, vertical or universal), remote monitoring
- Float: NBR foamed (closed cell)
- The ¾"1" threaded gauge is suitable for all DOT lift truck cylinders
- These gauges can be top, side or angle mounted
Gauge and resistive read-out for Livello compatible systems
Hall sensor for electric remote readout
FORKLIFT TANK EQUIPMENT (continued)
15
ALL RIGHTS OF CHANGE RESERVED
The SRG Compact Adapter in connection with the cylinder valve allows to deliver an unreduced pressure which is required for the operation of torches, burners and furnaces for commercial and industrial applications. Rated for inlet pressure of between 0,3 and 16 bar the adapter has a capacity of 8,0 kg gas/h.
The adapter will be directly connected with the cylinder valve.There are no tools required to connect the adapter to the valve.
SRG 454-212 / 3 SRG 454-103-1001 SRG 425 SRG 426-425-1
DescriptionSRG Cylinder Valve with dip tube, bent R
144 mm
FLT Cylinder Valve with 22 mm Compact
Quick-Coupling Outlet
Cylinder Valve with Compact
Quick-Coupling outlet
Cylinder Valve with Compact
Quick-Coupling outletInlet W 19.8 ⁄W28.8 W 19,8
Outlet W21,8 x 1/14-LH DIN 477 Ausgang 22 mm SRG 426Kompakt
Tauchrohr R 144 gebogenWith dust plug
A new solution would be our screwed-typed
connector SRG 425-501-1001, as a temporary
solution for existing FLT cylinders (it includes a
rubber seal without back check valve). This
timely fashion solution is suitable for all FLT
cylinder valves with German
outlet connection,
outlet 22 mm to the Compact
Quick-Coupling System.
Item no inlet outletwith EFV, color
grey
640-052-1001 22 mm W21.8-LH Nr. 1, Angled Vertical
640-051-1001 22 mm W21.8-LH Nr. 1, straight Vertical
640-050-1001 22 mm W21.8-LH Nr. 1, straight Horizontal
640-056-1001 22 mm 5⁄8“-18 UNF Vertical
640-055-1001 22 mm ½”-20 UNF Vertical
640-060-1001 22 mm 5⁄8“-18 UNF,angled Vertical
640-058-1001 22 mm ½”-20 UNF angled Vertical
640-059-1001 22 mm ¼”-18NPT Vertical
Outlet
W 21,8 angledW 21.8
horizontal/vertical¼“-18 NPT
Top: ½” – 20UNF – SAE – UNF – 2A – RH – EXT
Middle: 5⁄8” – 18 UNF – 2A – RH – EXT – 3⁄8 SAE F
Bottom: W 21.8 x 1 ¼” – LH DIN 477 No. 1
Please ask us for further models.
A better overview about our wide range of cylinder valves gives you a separate catalogue
FLT CYLINDER VALVES
COMPACT ADAPTER SRG 640
www.rotarex.com
SRG SCHULZ & RACKOW GASTECHNIK GMBH Industriestrasse 11,
D-35075 Gladenbach,
Germany
Tel.: +49 6462 9392 0
Fax: +49 6462 9392-91
E-mail: [email protected]