Download - User Guide of Capturing CAM Output_by COM_Lb
Transcript
User guide of capturing CAM output
(Loader_board_CAM)
1. Connect the CAM, CAM_EXT_CARD, Smartcard and your PC as the Figure
bellow.
Notice: The smartcard IC chip side up
2. Start Hyper Terminnal in your Operation System(e.g. window2000/winxp).
Set the com parameter as this:
Baud=115200, data bits=8, parity=odd, stop bits=1, connect the com. Click
“capture text” item in you menu bar. And select the folder in popup window
to save and name your file, then click “Ok”.
4.Please power on you STB. Then you can get the printing from cam.
5. When you finish your capture action. Then stop capturing text by click menu
bar “capture text”-“stop” item. Refer to following figure.