UNIVERSITY OF VETERINARY AND ANIMAL SCIENCES, LAHORE
Bidding Documents
(Purchase of Laboratory Equipment, HVAC system and Miscellaneous Stores)
LAST DATE FOR SUBMISSION: 06-12-2016 AT 11:00 AM
Tender No.068/2016
Contact Address:
Incharge Purchase Cell
University of Veterinary and Animal Sciences,
Sheikh Abdul Qadir Jelani (Outfall Road) Lahore
UNIVERSITY OF VETERINARY AND ANIMAL SCIENCES, LAHORE (Enhancement of Research Facilities at UVAS Ravi Campus, Pattoki)
Tel: 042-99238724, 9211449-50 (Extn-224), Fax: 99211461, E-mail: [email protected]
No: Coord (ERF)/Eqpt/0170
Dated: November 2016
TERMS & CONDITIONS FOR TENDERS
1. The tenders complete in all respects should reach in Purchase Cell, UVAS by 06-12-2016 up to 11:00 AM along with 2% Bid Security of
Estimated Price/Cost in the shape of pay order/bank draft in the name of “Treasurer UVAS” Lahore. (Calculation of CDR should be shown on the
bidding documents).
2. Tenders shall be opened by the Purchase Committee in presence of
the contesting bidders or their authorized representatives on 06-12-2016 at
11:30 AM in the office of Convener Purchase Committee.
3. The rates should be quoted both on FOR and C & F basis. Prices
should be in foreign currency for C & F through Letter of Credit (LC) on
Lahore Airport/Dry port. However, in the case of C & F Karachi, the
tenderer will be responsible for transportation of goods from Karachi to
UVAS Lahore (City/Ravi Campus).
4. The offered rate should be inclusive of all levied taxes.
5. Quoted rates must be valid for 120 days.
6. No offer shall be considered valid if it is:
a. Submitted without Tender Documents duly signed by Official of
Purchase Cell.
b. Submitted without earnest money.
c. Received after the date and time fixed for the receipt of tenders.
d. Received unsigned.
e. Received in ambiguous state
f. Given by the firm black listed, suspended or removed from the
approved list by any Government, Semi Government,
Autonomous Bodies or other firm.
g. Received by Telegram.
I Received with a validity period shorter than the required in the
tender enquiry.
J Does not conform to general conditions of the enquiry i.e. it is
not accompanied by sample or manufacturer’s literature where
required.
k. Given for stores materially and substantially different from that
required in the tender enquiry.
7. The successful tenderers have to deposit 10% as
security/performance guarantee of the total offer on acceptance of the
tender which will be refunded/returned on expiry of guarantee period
and without interest.
8. All taxes applicable under the rules will be deducted from the bill.
9. The equipment supplied by the supplier shall be brand new, in
original manufacturer’s packing and complete in all respects. Cost of
transportation of supplied equipment to the site of University
(City/Ravi Campus) and cost of installation and commissioning of
equipment shall be the responsibility of the supplier. Country of
origin, model, and year of manufacturing assembly of all equipment
should be mentioned.
10. In case of purchase on C & F basis, Suppliers will submit Performa
Invoice in original from their Principal duly signed & clearly indicating
the complete specifications of each item as per tender inquiry, the
name of the manufacturer and country of origin along with certificates
authorizing them to quote on their behalf as follow: -
“This is to certify that M/S--------------have obtained quotation
from us against invitation of tender due on--------- and have
agreed to supply the stores strictly in accordance with the
specifications laid down in the said invitation to tender and he
is manufacturing company’s authorised dealer/distributor/
supplier in Pakistan. Tenderer must provide the E. mail
address/website of the original manufacturer”.
11. Letter of Credit will be processed by the University and letter for
exemption of taxes where applicable will also be provided by the
University, however, charges with regard to Custom duties and other
taxes levied by the Government if any and not covered under
exemption letter shall be borne by the University.
12. Evaluation of lowest bidder will be calculated on overall lowest of lot
where applicable.
13. The Freight/Transportation charges from Seaport Karachi to
University premises at Lahore or Ravi Campus Pattoki will be borne by
the Supplier. However, clearing agent charges and airport fee will be
paid by the University.
14. The University will get the equipment inspected at University premises
and reject the equipment, if not found according to the given
specifications. In the case of inferior quality, defective workmanship,
faulty design, faulty packing or is short supplied, or wrongly supplied,
the supplier will replace the short supplied, wrongly supplied, faulty
or defective material free of charges or will pay the full cost of
replacement.
15. Supply of material should be made within stipulated period of the
Purchase Order positively; in case of failure the amount of CDR will be
forfeited and purchase will be made at the risk and cost of the
defaulter or any penalty as per rules can also be imposed
16. The Supplier shall be notified in writing/through telephone
immediately of any defect that may occur during the warranty period.
On receipt of such notification/telephonic message the supplier shall
attend the breakdown within a maximum of 24 hours.
17. The firm offering prices for supply of machinery and equipment
should have sufficient qualified technical staff adequately equipped
and having capability to undertake the maintenance or replacement
for the equipment supplied to this University.
18. The University reserves the right to accept or reject any tender or part
of it under the PPRA rules.
19. The University reserves the right at the time of award of contract to
increase and decrease the quantity of stores. The items to be
supplied/delivered on weight basis will be weighed on receipt at the
University City/Ravi Campus.
20. The University reserves the right to claim compensation for the losses
caused by delay in the delivery of stores,
21. Please read, sign all the tender documents, terms and conditions
carefully and attach with your bidding documents.
21. The bidding documents should be dropped in Tender Box in the office
of the Purchase Cell, Room No. 108, 1st Floor, Admin Block UVAS,
Lahore during five working days till the last date mentioned in tender
notice.
22. The detailed specifications of required equipment are given in the
subsequent pages.
We, M/S. ____________________________ hereby certify that we have read and
agreed with all terms and conditions mentioned above.
Signature:
________________________________
Designation:
_________________________________
Dated:
_________________________________
Stamp:
_________________________________
(IN CHARGE PURCHASE CELL)
LIST OF LAB EQUIPMENT AND MISCELLANEOUS STORE
ITEMS ALONG WITH SPECIFICATIONS UNDER THE PROJECT
“ENHANCEMENT OF RESEARCH FACILITIES AT UVAS RAVI
CAMPUS PATTOKI”
Leather and Fiber Laboratory
1. OFDA 2000 and OFDA 100
1 Unit 1x Laptop PC (Windows 7 English) 1x 4-way AUS power board 1x power adaptor 3x fiber glass
sample slides 1x polytope calibration check slide (18.X um) 1x BSC OFDA instruction manual containing OFDA IWTO Test Method 1x sample
preparation fan 2 x Sampling Scissors 1x automatic spreader serial# 1x 15V DC power pack 1x mains cable 1x 70mm slide adaptor 1x slide
holder rack 4x prepared polyester standard slides 40x clean 70mm glass slides 1.80 – 1.90 mm 1x
manual spreader 1x brush 1x tweezers 1x paper towel pack 1x guillotine to cut 2mm fiber snippets from staples 1x guillotine dish. Complete
installation and Commissioning. To be quoted separately for OFDA 2000 & 100.
2. Wool Carding Machine (Lab scale)
1 Size: 100cm Processing capacity 10 kg/hr Electric specifications: Power consumption: 5.0 kW Single phase 230V 50/60Hz.
3. Loose Wool Bulkometer 1 Cylinder Area 50cm2 Piston Weight 500g;
Load 1000g; Gauge Range 0-159mm;
Dimensions 126*100*360mm
4. Scouring Plant 1 Description: Wool Scouring Plant. Voltage: 220V Capacity: 10-500 kg Certification: CE & ISO
9001 Materials: Stainless steel 304
5. Micro Projector for
Wool Analysis
1 Type: Fiber Testing Machine Product: High
Quality Wool Fineness Meter Type: Fiber Testing Machine. Product: Fiber Bundle Strength Tester
6. Leather Staking Machine /Hide Puller
2 Leather Staking Machine (Hide Puller) 30- 50/H, 400 v - 5.5 kw Hydraulic at 6.3-8 Mpa - Galvanized - 2.2m travel & Stainless Steel chain
& rotating drum - 1500 x 635 x 4936 (LXWXH) with operator’s platforms. Complete Installation
with backup External hydraulic motor drive on winch drum, Single stage hydraulic ram eliminates carriage shudder, Maintenance
accessibility & hygienically designed, Manual control and activation, Carriage travel 2.2 m, 400
V 3 phase 5.5 KW Hydraulic Pump, 30 – 50 cattle
/ hour, Stainless steel chain and roller, Robust
construction in hot dipped galvanized or stainless steel.
7. Minicoring Machine 1 Minicoring Machine Apparatus with a 2 mm
nominal diameter fitted with 10 tubes. Description: used for cutting wool and fiber
8. Rub Fastness Tester Machine
1 Rubbing Fastness Machine Head diameter: 16mm Dimension 65 x 37 x 40cm (L x W x H) Weight
18kg. Description: to test the colorfastness of the dyed fabric and leather
Meat Science & Technology Laboratory
1
Chicken Fryer 1
Chicken open fryer with 12 programmable cook
cycles; build-in filtration LED time/temp display capacity 10L temperature range 30-200C Weight about 125Kg200C.
2
Lab Air Drying Oven 2
Lab drying cabinet; Digital PID-microprocessor
Controller Temperature range 5°C above ambient up to +270°C adjustable temperature
control options; interior dimensions 550 x 460 x 400 mm
3
Fume Hood Chamber
level 2 1
Size 4 feet. External polypropylene structure,
stainless steel working area with light. Transparent door sash with original exhaust blower, also equipped with water & gas
connections and base cabinet.
4 Electrical Pressure Chamber for Smoking
& Grilling
1
Electric smokers in stainless steel with double
wall isolation (40 mm), 4-8 heaters with thermostat (50-300 °C) and timer, 2-4 racks and drip-pans.
5 Rational Oven Type
CM6 (Rational steam, Convection Oven with six shelves)
1
CM6, Steam - Convection Oven: Length: 900mm - Width: 800mm - Height: 700mm -
Material: Stainless steel - Quantity of shelves 6 - Shelves dimensions: 530mm x 330mm
6 Water Holding
Capacity (Glass Compression
Apparatus)
1
YYW-2 Strain Controlled Un coffining
Compression Apparatus, 250-500 N. Imported.
Fish Processing Lab 1.
Tilapia and Carp fish
Fillet Machine 1
Tilapia and Carp Fish Filleting Machine. High Efficiency (Multiple species fillets). Dimension:
1100x1300x1200mm. Voltage: 220V Capacity: 40~60 pcs/min
2.
Fish Deskinning
Machine 1
Fish de-skinning machine for carp fish and
Tilapia. Material: stainless steel. Voltage: 220v single phase. Roller speed: 22m/min. Capacity: 30-50 pcs/min. Type: Fish Processing
Machinery 3.
Electric Fish Scalar 1
Electric fish scaler. Slick Skin Drum Fish
Scaler (50 smaller fish). Stainless steel drum, toss in the fish, replace the door
4.
Manual Scaling Device for all Fishes
1
Fish scaling device is well protected from spray water, safe in operation and securely insulated.
The 220 V/50. Can be connected to a grounded or non-grounded wall socket. The cover of the
laminated, flexible axle (160 cm long) consists of two layers of steel, one layer of insulating compound and one layer of plastic. The device
will be completely with handle, feets, Fish can be scaled to avoid spraying of scales during
scaling.
5.
Slicing Machine for Fish Fillets
1
Automatic high quality stainless steel fish fillet cutting machine/automatic fish slice cut machine. Best slicing results are achieved with
yield of approx. 99 %. Parts are made from polished and eloxided aluminum. The blades made of specially chromed steel and last very
long.
6. Electric Pressure
Chamber for Smoking and Grilling
1
Electric 5Qt Smoker. The Only Indoor Pressure Smoker. Pressure Smoke Cold Fish.
Dimensions (WxHxD) 45 x 35 x 45 cm. Racks and grids 30 x 40 cm. Load max. 24 Fish or almost 5-7 kg fish.
Connection 110/220 V 1 kw. 7.
Vacuum Packing Machines for Fish
1
Small size machine for fish packaging. Table models the vacuum chamber with stainless
steel and the high transparent lid of acryl glass. Automatic working process with time control pane (and from type "B-35" on also through the
digital sensor control with 10 programs). A gas injection system and soft-air ventilation from
type "B-35" onward. Single sealing bar configuration (single time sealing-cutting system on request). The professional vacuum
pump 230 V/50 Hz (vacuum time 10-60 seconds). Liquid insert-plate as accessories.
8. Flake Ice Machines with Storage
Container
1
Stainless steel and have small dimensions and
a high production capacity. FCKW-free (R404a or on request also CO2), have adjustable feet
and an automatic water remover. As accessories isolated storage containers for 40 kg ice.
Type/Capacity/day/40 kg
9.
Stainless Steel Fish
Drying 1
Temperature range: 4-270 C. Microcomputer
intelligent PID control system. The shell made of high quality cold-rolled steel with metallic paint spray attractive appearance design. Hot
air circulation system consists of low noise fan and air dust. Two models material: mirror stainless steel and zinc-plating. with double-
layer tempered glass observation window, easy to watch the materials in the chamber shelf
space and shelf number can be adjustable. Convenient to access different specification samples. Ergonomic tight buckle handle
design. Precision LCD with timing and over temperature alarm and computer interface.
With standard international brands cooling fan. Mirror stainless steel inner, anti-acid, anti-corrosion characteristics
and air dust. Two models material : mirror stainless steel
and zinc-plating. with double-layer tempered glass observation window,easy to watch the materials in the chamber shelf space and shelf
number can be adjustable.convenient to access different
specification samples.
ergonomic tight buckle handle design
Precision LCD with timing and over-temperature alarm and computer
interface
With standard international brands cooling fan
Mirror stainless steel inner, anti-acid, anti-corrosion characteristics and air dust.
Two models material: mirror stainless steel and zinc-plating. with double-layer tempered glass
observation window,easy to watch the materials in the chamber shelf space and shelf number can be adjustable.convenient to access different
specification samples. ergonomic tight buckle handle design Precision LCD with timing and over-
temperature alarm and computer interface With standard international brands cooling fan
Mirror stainless steel inner, anti-acid, anti-corrosion characteristics
10.
Blast Chiller for Fish Storage
1 Blast Chiller and Freezer for fish (Capacity 150L)
11.
Commercial Food
Slicer
1
Commercial Food Slicer 12-Inch. Sirman
15304C0G08NA Canova 300 or equivalent.
12.
Heavy Duty Slicer 1
Canova 300 - Code CANOVA 300 or equivalent
(Ext Dimensions: W640 x D495 x H495mm. Blade Size: 300mm.)
13.
Fish Meat Mincer 1
Electric manual mini frozen fish meat grinder machine. Brand Name: MINSTA or equivalent. Production Capacity: 120KG per hr.
Voltage: 220V. Spare parts: blade provided Material: stainless steel
14.
Fish Knife Set 1
Complete set with cutting boards, trays and
Utensils. 50 pieces of all sizes and cutting saws. Stainless steel Imported
15.
Cooking Range 1 Four burners. Electric control. Stainless steel
Voltage 220 V.
16.
Freezer (-20 0C to -40 0C)
1
Size 400 liters or above for fish storage, value
added products storage for long time. Temperature range (-20 0C to -40 0C)
17.
Beehive Fish De-boner 1 Production Capacity = about 60 pcs/min. Fish pieces =3 pieces or butterfly pieces. Voltage= 380V. After-sales Service Provided
18.
Fish Chopper 1
Stainless Steel. Removable, easy-cleaning.
Brand Name: OUTAI or equivalent. Voltage (V): 220. Accessories Pictures:3 pcs cutting plate +
food pusher; Removable, easy-cleaning.
19.
Waste Chopper for
Production of Waste 1
Medium size Dry suction lift up to 22 feet. Hydraulic efficiency. Discharge size from 3” to 16”
20.
Automatic Double Chamber Smoked Fish
Machine
1
Simple operation and extremely compact design. Capacity 20-50 fish. Inside volume 65 Liter. Outside (WxDxH)= 45x36x90 cm. Inside
(WxDxH)= 40x33x50 cm. The aluminum coating, heat-resistant. Stainless steel is 100% corrosion-resistant, acid- and leach-resistant,
easy to clean thus allow flexible use (smoking of fish). Interchangeable electric firing, for hot-
and cold smoking of fishes as well fish meat. Dry-drip-tub and bouncer. A smoke pipes (130 mm diameter)
21.
Rational Oven Type
CM6 (Rational steam, Convection Oven with six shelves
1
Capacity 20 GN 1/1 pans or 10x GN 2/1. Maximum Pan depth: 65 mm deep pans. 15-
300 meals per day. 350 programs/12 steps. Calc Diagnose System (CDS). Power: 415/50 30 +N+E; 36.7kw. Dimension: 1069x 971x 1042H;
182 kg
22. Electric Roller Grill Capacity 15 Fish with
Rotating basket
1
Thermo-statistically controlled heat resistant
handles completely removable parts Dishwasher saif oil container 13 amp electrical connection
23. Cooking Kettle 1 Capacity 500 ml. Local/Imported
24.
Tank with Mixer 1
Capacity 200 liter. Low pressure coat,
pneumatically drain valve. Two connection with hot and cold water
25.
Portable pH Meter for Direct Measurement
of Meat
1
Portable pH/ Temperature Meter for Meat Applications. Portable and waterproof pH and temperature meter designed for use in the meat
processing industry. Automatic one or two-point calibration for ease of use.
26. Water Holding Capacity (Glass
Compression Apparatus)
1 Optical projection on 38 cm screen;
Two magnifications
27.
Lux Meter for Texture Measurement in Meat
Quality
1
Lux meter measuring up to 100000 Lux
(Imported). Precise and easy readout. High accuracy in measuring LSI-circuit use provides high reliability and durability. Permits a wide
range of light measurements Adjusting zero automatically and excellent operation. LCD
display provides low power consumption and clearly read out evening high ambient light.
28. Digital Infrared Meat / Food Thermometer ,
High Temp IR Thermometer
1
Temperature Range: -50 0C to 380 0C. Distance spot Ratio: 12:1. Emissivity: 0.95. Response
time Wavelength: 500 ms (8-14 um). Resolution : 0.1 0C or 0.10C/0F selection
29.
Color Test Meter 1
Fish meat Color Test Meter. CIE 1931 (2 degree) CIE 1964 (10 degree). Tristimulus value :<1.00. Chromaticity coordinates. Display
symbol and value through VFD screen. Imported
30.
Process line-belt conveyor
1
Professional designed fish conveyor: 1. Noise Reduction. 2.Speed & height adjustable 3.
Move forward & backward. The fish conveyor can be used independently or multi-conveyors together or combined with other transfer
equipment. and belt conveyor can be installed horizontally or slope to meet the needs of
different transfer lines. Belt conveyors can work in the temperature range from -20 to +40. The temperature of transferred materials should be
lower than 50.
31.
Process Line-Pocket
Conveyor 1
Fish Processing table fully equipped with water supply pipe and waste bins Dimension of the
table (LxWxH)= 16’x6’x2.5’). Capacity: 180 fish /minutes
32.
Table - Grading with Bins
1
Fish Processing table fully equipped with water
supply pipe and waste bins Dimension of the table (LxWxH)= 16’x6’x2.5’). Capacity: 180 fish /minutes
33. Boxing Roller 1 Boxing roller 5’x2’ section
34. Fillet Line (belt driven)
1 Hiwell or equivalent. Production capacity: 200-600 kg/h. Stainless steel
35.
Drum & Lid
(make/store brine) 1
Medium size drum with cover/ lid for the preparation of brine for fish. Used for fish
preservation. Capacity 500 Liter Made of Fiber glass material.
36.
Dolly (6 tub capacity) 1
Diameter, easy grip frame. All welded
aluminum, solid caster hubs with 5 caster Size 27.5x 35x 31.25
37.
Canning Retort with Controls
1
Use for canned food, tuna, carp fish, soft pack, sauce, fish meat, and small scale food.
Capacity: 100 liters. Voltage: 220V. Power (W): 60-80Kw.
Dimension(L*W*H):2600mm*1200mm*2200mm Certification: ISO, CE, ASME. Heating Method: Electric heating/steam boiler. Material:
Stainless steel 304/316. Energy saving, eco-friendly, save time and space, easy to operate Category: High pressure high temperature
Control Mode: PLC full automatic/semi-automatic. Output: 50-150Kgs fish
38.
Band Saw 1 181/2 x 23 ½” sliding stainless steel cutting table with 2 adjustable fences 11v/ 60 Hz, ¾-
hp motor generator 1750 rpm
39.
Hand Saw Blade 1 Blade diameter range, minimum and maximum 14-24”. Segment height 0.5”. Segment base
0.1”. Diamond depth 0.4”.
40.
Meat
Grinding/Stuffing Grinder
1
Professional hacksaw made of aluminum-base alloys tensioning mechanism for easy blade
replacement possibility to grip the blade in angle 45° exchangeable blade, width 13 mm
reservoir up to 10 blades
Animal Nutrition Laboratory
1 Fiber Analyzer 1 Capable of determining Acid Detergent Fiber (ADF), Neutral Detergent Fiber (NDF), and Crude
Fiber in all feeds and forage samples. Detailed features are given below: -
• Multiple Applications: Acid detergent fiber analysis, Neutral detergent fiber analysis, Crude fiber analysis
• Fully Automated: No chemical and hot water
handling, limited technician involvement, all rinses done automatically
• Filter Bag Technology: Eliminates error and
increases precision, enables 24 sample batch processing, increasing throughput, Filtration
occurs automatically
• Closed System: No technician monitoring required, Eliminates chemical handling during operation
• Fiber Filter Bags 1000 • Acid detergent CTAB powder
• Heater or sealer (220 v) for sealing the filter bags
2 Atomic Absorption
Spectrophotometer
1 Wavelength range: 185-900 nm
Wavelength accuracy: Better than +0.25nm Baseline Stability: .004A/ 30min
Background correction: The D2 lamp background correction capability with self-correction capability
Lamps: 4-8 lamps; auto alignment; auto fine adjustment; fully automated scan and peak-picking
Lamp current adjustment: Automatic adjustment and display. Lamp power supply
mode: Powered by two pulses (wide and narrow) simultaneously Optical System:
Mono-chromatic light Focal length: 250-277mm
Atomizer: Specify materials of construction Atomizer Mounting and Adjustment: Atomizer
mounting mechanism should be suitable for flame, vapor, graphite furnace, and automatic changeover
Automatic flame height setting, and position optimization.
Automatic gas flow setting, alarm and automatic protection function for gas leak, abnormal flow, air-pressure deficiency and abnormal flame
extinction, automatic ignition. Auto-sampler Corrosion resistant 80-100, positions with
pump, speed control, and rinsing of probe Data system
Computer System: latest lap top, compatible software installed and fully functional Software
Compatible with all operational modes of equipment and automatic results calculation
Accessories Compatible Air Compressors must be oil free Fume Hood
Oxygen gas Cylinder with regulator Argon Gas Cylinder with regulator Acetylene Gas Cylinder with regulator
Single element lamps for Ca, Mg, Na, K, Cl, Fe,
Mn, Zn, Cu, Iodine, Cobalt, Se, Cr, Mo
Compatible computer system with printer Minimum 2 weeks in lab training (Local) Consumable spare kit for 2 years
Warranty 2 years with parts and maintenance
3 Hot Air oven 1 Ventilation controlled, Natural convection, LED
display, Over temperature protection, textured stainless steel casing and interior, temperature range of 5C to 300C, Voltage 220, capacity 200 ± 20 liters
4 Digital Muffle Furnace 1 Capacity: 4.5 Lit. and Temp. Range: 3000C ~ 11000C or above. Heater: Exposed Wire Heating
Elements Thermocouple: Thermocouple Heating Power: 1.8 kW, with timer.
5 Willy Mill 1 1-2 mm sieve. with exhaust chamber. Moving parts totally enclosed in steel. 7 3/4” diameter milling chamber - 141 cu. in. 2 1/4” diameter
sample input. 50 to 1,000-gram sample volume. Single speed - 800 rpm at 60 Hz or 667 rpm at 50 Hz. All steel construction
6 Multi Vortex 2 Speed range from 250 to 3000 rpm, equally applicable for drug toxin extraction, drug
extraction and enzymatic essays. Both continuous and touch start system. Multi
platforms for range of sample processing. Temp gauge.
7 Fume Hood 1 Air Inflow Rate105 fpm, Size 5 - 6ft, Total
Exhaust type, Fluorescent Lighting, 230V Voltage, 23.5 in Depth, Recirculated air 0%,
Exhausted Air 100% with original exhaust blower.
8 Weighing Balance 1 Weighing capacity : 220 g Minimum sample weight acc. to USP (typical) 20 mg Adjustment Internal, ISO CAL, Legal verification, Optional
Interfaces: RS-232 25-pin / Bluetooth / RS-232 9-pin, incl. PS/2 port Operation Touch screen, keys for main basic functions
9 Refrigerator 1 No frost Refrigerator. Voltage (V) 187V~252V. Frequency (Hz) 50. Temperature of refrigerator 0℃~7℃. Temperature of freezer ≤-18℃. No. of
shelves in fridge 3. Type of shelves in fridge
Glass. No. of shelves in freezer 3.
10 Refrigerator -20 1 Capacity: 24-25 cubic ft. /690-710L Configuration: upright freezer Temp control;
microprocessor control and display probe facility also Alarm & Control system; Refrigeration
system; Hermetic compressor with fan. CFC & HCFC free refrigeration. Programmable defrost.(with stabilizer)
11 Water bath 2 Capacity: 22 Lit. Temp. Range: Ambient +5℃ ~
100℃. Temp. Sensor: PT 100
Display: Digital LCD Display Sensor Error
Detector.
12 Hot plates digital 3 Large Hotplate Ceramic Coated Plate Built-In Digital PID Controller. Superior Temperature uniformity: Less than 10% on the plate at
Ambient Temperature. Patented Jog-Shuttle Control System and Back-Light LCD. Digital PID
Controller Excellent for sample Drying and most general lab Heating Applications
Large Heating Area: Ideal for TLC Plate Heating and surface heating in Electronic Industries
Maximum Temperature for 350oC Technical Specifications: - Controller: Built in Digital PID Controller
Plate Surface: Ceramic Plate Size: 310x620mm Temperature Range & Accuracy: Max. 350oC,
±0.3oC at set temperature Temperature resolution: 0.1oC-Display, 0.5oC-
Control Temperature Uniformity: Specially designed heating module: Temp. difference 10% less
Heating Power/Consumption: 2kW Timer & Alarm: 99hr 59min (with continuous
run.) Error Status & Timer – end Display: Digital LCD back light function Dimension & weight: 670x360xh150mm, 16kg
Power Supply & Cord/Plug: 230V, 50/60Hz
13 Micropipettes 6 With pipetting rage: 1-10 ul, 10-100 ul, 100 to
1000 ul
14 pH / Conductivity
Meter with pencil electrode
1 Conductivity / TDS / Temperature Meter
Conductivity: 0 to 20.00, 200.0, 2000 uS/cm; 20.00, 200 mS/cm. Auto ranging.
15 Refrigerated
Centrifuge Machine
1 Centrifuge machine multiple capacity rotors.
Maximum. Speed rpm: 18000 to 21000/min Maximum RCF: 30000 or above, Temperature
Range: -20°C to +40°C
16 Desiccator 2 Glass desiccator vacuum/non vacuum. Size 200
mm or above.
Food Micro Structure Laboratory
1. Compound Microscope 3
Magnification 40X~1600X WF16X(2PCS).
Objectives 4X, 10X,40XS, 100XS Eyepieces.
Tube Binocular 45º. Coarse Adjustment Range
30mm Fine Adjustment Range 30mm. built in
battery backup.
2. Stereo Microscope with illuminating
source
1
Eyepiece(s): DIN WF 10x/18 mm. Binocular
with 30º inclined tube(s).Stage: Plain 120 x 120
mm. Coaxial coarse and 200 μm fine
adjustments, 2 μm precision.
3.
Phase Contrast
Microscope with illuminating source along with stage &
slide warmer
1
Magnification 40X~1600X WF16X(2PCS). With
Phase Contrast Objectives 4X, 10X,40XS,
100XS Eyepieces. Tube Binocular 45º. Coarse
and phase contrast kit. Adjustment Range
30mm Fine. Keeps the samples at 37 degrees C
and produces brilliant resolved images
4. Epifluorescence
Attachment for Microscope
1
Fluorescence microscope, coaxial coarse and
fine focus with stage up and down mechanism.
Coarse stroke 15 mm/rotation Fine stroke 100
μm/rotation Condenser (N.A. 0.9), for 1.25x–
100x (swing-out: 1.25x–4x)
5. Computerized Camera
Attachment with Microscope
1
Trinocular microscope Magnification Objectives
iscope plan objectives 4X, 10X,40XS, 100XS
Eyepieces. Coarse Adjustment Range 30mm
Fine Adjustment Image Max. Resolution: 10
Mega Pixel with software. Imaging sensor: Dual
USB 2.0 with computer.
6. Rheometer 1
Temp range RT-200°C. Rotor speed 2±0.02rpm
Mooney viscosity range 0-200 Mooney. Torque
unit kg-cm,lb-in,N-m Mooney specimen area
0.5m³.
7. Scanning Electron
Microscope (Cryo-SEM) 1
3.0nm (Vacc: 1kV, WD = 4mm, Mag: 80kX)
Magnification: 10 – 600,000X (at displayed
image size is 127 × 96mm) Electron optics:
Electron gun ZrO/W Schottky emission
electron source Probe current 1pA – 200nA
Accelerating
8.
Liquid Nitrogen Container, Cryogenic liquid storage and
transportation container
3
Capacity: 20m3. Working pressure: 22bar.
Available volume:20m3. Max working pressure:
21.6bar. Design temperature: -40°. Main body
material 16MnDR/Q235-B. Safety valve set
pressure: 22.7bar
Food Chemistry Laboratory
1. GC-MS 1
Auto sampler, calculation along with FID/MSD. Split/split less inlet, split less liner. Mass
Range: 1–1200 u. Power supply: 220V±10%, 50/60Hz. Helium/Nitrogen as carrier gas. Latest computer system along with software.
European/ USA /Japanese origin. Installation, commissioning, indigenous training and
maintenance for two years.
2. Rancimat 679 1
Inner diameter (mm) 12. Outer diameter (mm)
60. Length (m) 40 Width (mm) 111 Weight 0.26
3. NMR Spectrometer 1
Performance • Larimore Frequency 45 ± 1 MHz Proton • Chemical Shift Resolution 60 ppb FWHM or Better • Signal-to-noise >500:1
for Water, Single Pulse Magnet • Rare Earth
Permanent • 1.1 Tesla • Temperature Stabilized
Capillary Cartridge • Capillary Sample Loop 300 µm Capillary ID 30 µL Sample Volume • 1/16" Interface Fittings • User Replaceable
Sample • Sample Type – Liquid • Sample Introduction Inject Sample via Syringe Environmental • No Cryogens or Compressed
Gases • No Special Laboratory Environment Interface • Ethernet Direct Connection or LAN
• Embedded Web Server. Software/Collect • Web Browser User Interface • Data Export JCAMP-DX • Data Analysis Software NMR
Software • One Year License Electrical Requirements • 100/230 VAC, 50/60 Hz, 150
W.
4. Vacuum Pump 1
Up to 1.7 m3/h suction rate power supply:
220V AC
5. Refrigerator/Freezer -50oc
1
Capacity: 300 to 400 Liters. Temperature
range: Up rom: +3℃ to +8℃. Down rom: -10℃~-
40℃. Power supply: 20V /50Hz 1 phase, can be
changed as 20V 60HZ or 10V 50/6HZ
6. Incubator 1
Refrigerated/ non refrigerated. Shaking speed
300rpm digital display, multiple spring rack for
various flask capacity to hold 250 ml 22 Nos.
Food Hygiene & Safety Laboratory
1. Incubator 3
Digital display Capacity 50 liters. Temperature
range ambient +5 to 80°C internal & external
stainless steel body with two shelves.
2. Centrifuge Machine 1
Centrifuge machine. Maximum Speed rpm: 18000 to 21000/min. Maximum RCF: 30000 or
above, Temperature Range: -20°C to +40°C Centrifuge machine 50ml rotor speed 12000 rpm.
3. Vortex Mixer 1
Speed Range: 0 ~ 3000 rpm. Shaking Motion Orbital Control: Analog Phase Controller. Head included Pop-off Cup Head and Platform.
Material Aluminum Die-casting with Powder Coating. Electrical Requirement: 1 Phase, AC
120V, 60Hz or AC 230V, 50 / 60Hz
4. Ultra low temp. Freezer -80°C
1
Capacity 350 to 400 liters. Temp range -50℃~ -85℃. Digital display. Material: Internal
Stainless steel. External Powder Coated Steel
Plate. Electrical Requirement. 1 Phase, AC 230V, 50 / 60Hz
5. Water Bath 1
Capacity: 22 Lit. Temp. Range: Ambient +5℃ ~
100℃. Temp. Sensor: PT 100. Display: Digital
Display Sensor Error Detector
6. Safety Cabinet level 2 1
Safety cabinet level 2 with inner size:
1150*650*550" Hepa filters Efficiency:
99.9995% @0.3micron, Filtration System:
HEPA 30% air recirculation 70%ligh intensity >
800 lux on zero background, Working Area
Stainless steel. European/USA origin.
Sensory Evaluation Laboratory
1. Sensory evaluation
booths (With Computer)
10 Confined booths for food evaluation with
computer software
2. Sensory Software 1 Software for checking Smell, Taste, Flavor,
Texture etc.
3. Baking oven 1
Voltage(v): 230. Power(kw): 3. Dimension(mm):
865x715x450. Stainless steel front Door and
front Panel. Max. 450c temperature control.
4. Refrigerator 1
No frost Refrigerator. Voltage (V) 187V~252V
Frequency (Hz) 50. Temperature of refrigerator
0℃~7℃. Temperature of freezer ≤-18℃. No. of
shelves in fridge 3. Type of shelves in fridge
Glass. No. of shelves in freezer 3
5. Freezer 1 20 CUFT (-20 degree C)
Miscellaneous Items for Food Labs
1. pH meter 4
pH Range: -1.00~15.00pH. pH Accuracy: ±0.01pH. mV Range: -1000~1000mV. mV
Accuracy: ±1mV. Calibration Points: 1, 2 or 3 points. Calibration Solutions: pH4.01, 7.00,
10.01) or NIST (pH4.01, 6.86, 9.18. Temperature Range: 0~105°C, 32~221°F. Temperature Accuracy: ±1°C. Temperature
Compensation: 0~100°C, 32~212°F. Auto-Off: Manual or Automatic. LCD Display: Custom Dual-Display LCD (135×75mm).
2. Digital weighing balance
4 Maximum capacity: 240g-300g. Readability: 0.0001g. Repeatability (S.D.): 0.0002g. Pan
size: 80mm Ø. Typical stabilization time: 3 Sec.
3. Water bath 3
Capacity: 22 Lit. Temp. Range: Ambient +5℃ ~
100℃. Temp. Sensor: PT 100. Display: Digital
Display Sensor Error Detector Electrical
Requirement: 1 Phase, AC 120 V, 60 Hz or AC 230 V, 50 / 60 Hz.
4. Autoclave 4 Digital display. Capacity: 40 to 60 Lit. Temp.
Range +5C to 135C, +0.5C at 121C.
Pressure & Gauge: 1.2 kgf/cm2 at 121C / 2.0
kgf/cm2 at132C, 0 ~ 3 kgf/cm2. Sterilization timer & alarm: 60 min, Error status & Timer-
end. Door open with hand and also with foot, Powder Coated steel-External with two basket
stainless steel.
5. Kjeldhal Apparatus 1
Digestion system infra-red type digital display
capacity 12x250 ml with high vacuum pump 40 liter for fume suction, Measuring range: from 0.2 to 200 mg of Kjeldahl Nitrogen. Semi-
automatic Programmable distillation time. Nitrogen recovery >99.5%. Distillation speed: from 35-40 ml per minute. Typical distillation
time: from 7-10 minutes. Water consumption rate: from 80-100 liters/Hr. Steam generator
water consumption: 2,5 Liters/ Hr. Water reservoir for. NaOH reservoir: 20 Liters.
6. Digital Muffle Furnace 1
Capacity: 4.5 Lit. and Temp. Range: 3000C ~ 11000C or above. Heater: Exposed Wire Heating Elements Thermocouple: Thermocouple
Heating Power: 1.8 kW, with timer.
7. Stomacher 1
All stainless steel. Plain door. Useful volume:
50 – 400 ml. Fixed blending speed (8 strokes/sec.). Variable time (30 – 210 secs. or ∞). Adjustable paddles (patented). Fully opening
door (270°). Power: 220 V~ 50-60Hz.
8. Safety Cabinet 1
Safety cabinet level 2 with inner size:
1150*650*550" Hepa filters Efficiency: 99.9995% @0.3micron, Filtration System: HEPA 30% air recirculation 70%ligh intensity >
800 lux on zero background, Working Area Stainless steel. European/USA origin.
Fisheries and Aquaculture Laboratory
1. Effluent System with necessary Plumbing
1
Product Capabilities: Max. Spherical Solids:
3/4 in. 19 mm. Power motor. HESY/PENTAIRS or equivalent.
2. Grow Out Tanks with
pumps and blowers 1
Nominal Output: 120 Bottles/Hour. Heating System: Electrical Heater. Main Power: 380 V (±
10%) 3PH + E + N Auxiliary 24 VDC. HESY/PENTAIRS or equivalent.
3. Drum Particle Filters with Purge Tanks and
Divider Screens
1 Hydro tech 802, 40 Micron or equivalent. HESY/PENTAIRS or equivalent.
4. Bio-filter Tanks with
Media and Aeration Facility
1
Modern Polymers, Inc., Cherryville, 18 inches of
polystyrene, surface area of 4000 m2/m3. HESY/PENTAIRS or equivalent.
5. Feed Storage Bins with Feeding System
1 Feed storage bins with feeding system. HESY/PENTAIRS or equivalent.
6. Fish sampling Equipment with Water
Testing Facility
1 Chlorine Test Kit, Myron-L 3-Range TDS Meter, Ozone Test Kit. HESY/PENTAIRS or equivalent.
7. Monitoring System
with Backup Generators
1 Monitoring System with Backup Generators. HESY/PENTAIRS or equivalent.
8. Protein Skimmer with Allied Particles
Evaluation Facility
1
Suitable for 500L or below tank. Bubble Magus SP1000. Power: 220V to 240V 50Hz. Pump Capacity: 2500Litres /hours. Size
:185x180x470mm. HESY/PENTAIRS or equivalent.
9. Feed Extruder 1 Floating Fish Feed Extruder, running with 220-440-Volts power connections, working capacity 150-200-Kg/Hour
10. Fiber Glass tanks,
Aquaria with shelves 16
Front-to-back = 81.5 "left to right (longest rear dimension) = 173 "side angle walls with viewing
windows = 74.5 "front wall with viewing window = 72 "height = 47"
11. Aflatoximeter (UK/USA)
1
Minimum detection amount 0.0004 micrograms. Power: 600w. Working voltage: AC 50Hz 220V. Baked board: Heating area 200nn
200mm
12. Hydro Lab 1
Outer Diameter 8.9 cm. Length 58.4 cm (23 in.)
Maximum Depth 225 m. Operating Temperature –5 to 50 °C. Computer Interface
RS232, SDI-12, RS485
13. Injector KIT (Agitators) 1
Motor (hp): 0.170. Type of Motor: Air. Mixer
shaft rpm: 0-5000. Std. Shaft diameter: 0.500" Std. Shaft length: 12". No. of mixing blades: 1 Single blade size: 3.0" OR 6-Aerator
On Site Livestock Research unit
1.
Alfalfa Seed Drill
01 No. of Tines 17 with 6 Inch width in between. Drum seed capacity - 40 kg
2.
Fodder Cutter 2
Heads
01 Tractor PTO speed 540 RPM. Cutter Head
cutting speed 2300+ RPM. Cutting width
43”. Transportation height 34”.
Transportation length 105”. Transportation
width 40”. Transportation weight 286 KG.
Double edge cutting blades 6.
3.
Single Cluster Mobile
Bucket Milker Complete
01 Single Aluminium Bucket 40 Liters (with
option of connecting two clusters). Single Cluster with 300CC Claw-piece with shut off. Stainless Steel Shells 2.5mm. Liner Size
27/25/66 barrel, orifice, head. Milk Hose Rubber 14mm. Vacuum Hose PVC Material and size 7X3X2500. Pulsator
(packed) Constant PV60/40 45kPa with 1X Service Kit. Vacuum Pump 190l dry operated
with 0.75 KW Motor. Sanitary Trap. Vacuum Control Valve, spring-loaded 30-45kPa. Vacuum Gauge. Motor Protection Switch.
Extra Kit Rotor Vanes for Vacuum Pump. Introducing Rod for Liner. West European
origin.
4.
Double Cluster Mobile Bucket Milker Complete
01 Single Aluminium Bucket 40 Liters (with two Clusters). Double Clusters with 300CC Claw-pieces with shut off. Stainless Steel Shells
2.5mm Liner Size 27/25/66 barrel, orifice, head. Milk Hose Rubber 14mm. Vacuum Hose PVC Material and size 7X3X2500.
Pulsator (packed) Constant PV60/40 45kPa with 1 x Service Kit. Vacuum Pump 190l dry
operated with 0.75 KW Motor. Sanitary Trap. Vacuum Control Valve, spring-loaded 30-45kPa. Vacuum Gauge. Motor Protection
Switch. Extra Kit Rotor Vanes for Vacuum Pump. Introducing Rod for Liner. West
European origin.
5.
Deep Freezer + Refrigerator Varioline
1+1 18 cubic feet. Double door. Waves or equivalent and standard size Varioline
refrigerator
6.
Providing and Fixing
of Electric Cable
460 Feet Gauge: 120 mm 4Core Silver (Pakistan/Newage/Fast).
To be fixed from Baling Press Transformer to Precast
Cattle Shed of Imported Animals at UVAS Block-B
Ravi Campus Pattoki. Length approx. 460 feet. Quoted
rate should be per running foot inclusive of all levied
taxes and the cost of fixing & fixing material.
Supply & Installation of Photocopier at Ravi Campus Pattoki.
1.a
Medium Duty Photocopier
Richo or Equivalent 07
GENERAL
Warm-up time: 14 seconds,
First output speed: 4.6 seconds, Continuous Output Speed: 25 pages per minute,
Memory: 2 GB,
HDD:, 320GB, Power source: 220 - 240 V, 50 Hz,
COPIER
Copying Process: Twin laser beam scanning and electro-photographic printing,
Multiple copying:, Up to 999 copies
Resolution: 600 dpi,
Zoom: From 25% to 400% in 1% steps
PAPER HANDLING
Recommended Paper Size: A3, A4, A5, A6, B4, B5, B6
Paper input capacity Standard: 1,200 sheets (550 x 2 Trays + 100 Bypass Tray):,
Paper output capacity: Standard: 500 sheets,
PRINTER
Printer Imaging Standard: PCL5e, PCL6(XL), PDF
direct print,
Print Resolution: Maximum (1,200 x 1,200 dpi), Interface Standard: USB 2.0, SD slot, Ethernet 10
base-T/100 base-TX, Ethernet 1000 Base-T,
SCANNER
Scanning Speed: ARDF: Max. 80 originals per minute,
Resolution Standard: 100 - 600 dpi, Original Size: A3, A4, A5, B4, B5, B6,
Bundled Drivers: Network TWAIN
Scan to: E-mail, Folder, USB, SD card
1.b
Heavy Duty Photocopier
Richo or Equivalent
01
Type: Digital B & W Multifunctional Products
Functionality Print, Copy, Scan
Paper Formats: A6 to A3
Paper Input: 2x550 paper tray + 100 Bypass=1200 sheets
Document Feed: 100 sheets ARDF ,
Duplex: Full speed trayless duplex
Engine speed: 35ppm (A4 LEF)
First Print: 4.3 Sec (A4 LEF) Resolution:1200dpt(print) 600dpi (copy) 600dpt (scan),
Memory: 2GB (standard and maximum)
Hard drive: 320 GB
Multiple Copy: Up to 999 Copies
Zoom: From 25% to 400% in 1% steps,
Print Languages: PCLSe, PCL6 (XL) adobe PDF Direct Interface: Gigabit Ethernet, USB, SD Slot.
Warranty: One year comprehensive Warranty i.e labor & parts
Letter of Authorization Distributor from Principal Manufacture
Must have 5 year experience with Principal Manufacturer as Distributor
Miscellaneous Store
1. Supply & Installation of HVAC SYSTEM at Food Safety & Diagnostic Labs and
General AIR CONDITIONING of Central Laboratory Complex (CLC), Ravi Campus Pattoki.
a. DX Type Air Handling Unit
2.00 Nos Imported DX type air handling unit, double skinned, heat & cool capacity 10 Tons
(electric heaters) with fresh air flow rate 560 CFM comprising on following section. Aluminum Filter + Pre Filter + Bag Filter + Fan Section
The AHU shall have matching condensing
unit capacity 12 HP Copeland compressor, High low pressure controller, low ambient
controller, axial flow condensing unit fan motor, all necessary electrical controllers like, phase failure relay, overload for motors
and timer, placement of air handling units, condensing units, copper piping and electric wiring through galvanized iron cable tray.
b. METAL DUCTING
Approx. 2150.00
Galvanized iron sheet rectangular duct work fabricated with 22/24 gauge slip joints,
complete with all necessary support,
Sft. hangers, fittings and hardware according to
the drawing.
c.
INSULATION
Approx.
2150.00 Sft.
Fiber glass insulation having density 16
kg/m3 (50 mm thickness on outdoor and 25 mm on indoor) with aluminum foil finally
wrapped with course cloth.
d.
JACKETING
Approx.
650.00.00 Sft
Galvanized iron sheet rectangular cladding
work fabricated with 26 gauge using bracing complete with all necessary hardware and
finish.
e. AIR REGISTERS Approx.
9150.00
Sq. Inch
Extruded aluminum powder coated painted supply air and return air grills with volume
control dampers.
f. FRESH AIR DAMPER GRILL
2.00 Nos Extruded aluminum powder coated painted return air grills.
g. VOLUME CONTROL
DAMPER
Approx.
1840.00 Sq. Inch
Galvanized iron sheet constructed VCD
gauge 18.
h. FLEXIBLE CONNECTIONS 60.00 Rft.
Pre-molded pipe flexible duct work pipe size
10’’.
j. HEPA FILTER 12 Nos
HEPA filter section complete with micro glass fiber high eff.99.99% on 0.3 μ, construction
with extruded aluminum frame
k. MINI SPLIT UNITS FOR OTHER LABS
(CLC)
20 Nos INVERTER SERIES wall mounted type air conditioning unit nominal cooling capacity
2.0 Ton, according to drawing, indoor unit at plate, outdoor unit at mild steel constructed
frame, copper piping in between indoor and outdoor unit, brazing, flushing of system, pressure testing, vacuum, gas charging,
control wiring.
l. MINI SPLIT UNIT FOR
SPECIAL EQUIPMENT CABINS
05 Nos INVERTER SERIES wall mounted type air
conditioning unit nominal cooling capacity 1.0 Ton, according to drawing, indoor unit at plate, outdoor unit at mild steel constructed
frame, copper piping in between indoor and outdoor unit, brazing, flushing of system,
pressure testing, vacuum, gas charging, control wiring.
m. CIVIL AND FOUNDATION WORK
Job 01 No.
Civil work related to condensing and air handling unit’s foundation complete as per drawing.
n. DRAWINGS
Job 01
No.
Shop drawing and AS Build drawings along
with technical proposal.
o. AIR BALANCING AND
COMMISSIOING
Job 01
No.
Testing, balancing and commissioning of air
side and HVAC system complete in all respects including air balancing, temp,
pressure & electrical data of related
Lt. Col Abdullah Khan (Retd) Project Coordinator
equipment as per specifications.
p. OPERATION &
MAINTENANCE:
Job 01
No.
Trouble shooting and on call maintenance for
one year.
2. Providing & Fixing of LT Line 1 Providing and fixing of LT Line consisting of
05 wires at On Site Veterinary Clinical
Research Unit Block-A Ravi Campus Pattoki comprising of: -
a. LT PC Poles - 06 b. Insulators - 40 c. Silver Conductor 7/122 - 4000 Rft.
d. Stay Wires - 04