United RentalsTool Solutions Catalog
UnitedRentals.com | 800.UR.RENTS© 2017 United Rentals, Inc.
38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM
Tool SolutionsProducts
38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM
1Rent now at UnitedRentals.com/equipment
Cooling, Ventilation & Vacuum ........... 2-3Air Horns .....................................................2Blowers ................................................... 2-3Cooling Fans ...............................................2Cooling Trailers ...........................................2Vacuums .....................................................3
Air Tools ................................................ 4-7Texas Pneumatic Ventilation Fans..............4Air Impact Wrenches...................................4Air Hack Saws.............................................5Air Drill.........................................................5Air Grinders .................................................5Air Die Grinders...........................................5Scabblers ....................................................5Air Manifolds & Receivers...........................6Compressor Air Hose..................................6Needle Scaler..............................................7Air Breakers.................................................7Rock Drills ...................................................7Rivet Busters...............................................7Backfill Tamper ...........................................7Clay & Trench Diggers ................................7
Boiler Tools...............................................8Milling Guns ................................................8
Electrician Tools................................. 9-14Conduit Benders .........................................9Electricians Cable Pullers ...........................9Benders.....................................................10Tuggers .....................................................11Cable Feeder.............................................11Reel Jacks...........................................11, 13Cable Rollers.............................................12Sheaves.....................................................12Tray Rollers ...............................................13Wire Reel Dispensers................................13Fish Tape ..................................................13Crimpers & Die Sets..................................14
Punches...................................................15
Hoisting ............................................. 16-18Chain Hoists........................................16, 18Lever Hoist ................................................17Beam Clamp .............................................17Beam Trollies ............................................18Snatch Blocks...........................................18Shackles....................................................18Roustabouts..............................................18
Hoisting & Tuggers.................................19Hydraulic Jack/Dolly .................................19Tuggers .....................................................19Pipe Dolly ..................................................19
Jacks & Lifts ...........................................20Max Jacks.................................................20Roll Jacks..................................................20A-Roll Jacks..............................................20V-Head Jacks............................................20Porta Powers ............................................20Machine Skates ........................................20Hand Hydraulic Pump...............................20Bottle Jacks ..............................................20
Piping................................................. 21-25Flange Spreaders......................................24Hydrostatic Test Pump Air........................21Geared Threader .......................................21Threading Machines..................................21Pit Bull .......................................................22Rolling Unit................................................22Track Unit..................................................22Pipe Threader............................................23Pipe Line Up Clamps ................................23Gear Head.................................................23Pipe Cutters ........................................ 23-24Pipe Vise Stand.........................................23Bench Pipe Vises ......................................24Pipe Jeep Meters......................................24Hydraulic Pipe Crimper.............................24Roll Groovers ............................................25
Mobile Tool Room & Pro-Boxes ..... 26-29Mobile Tools Room...................................27Pro-Box.....................................................27Electicians’s Pro-Box Sample Tool List 28Pro-Box Options .......................................28Sockets and Wrenches.............................28Pliers, Clamps and Cutting .......................29Screw Drivers, Nut Drivers & Hex Keys....29Striking & Struck .......................................29
Torquing ............................................ 30-31Hydraulic Air Pump ...................................30Electric Powered Hydraulic Pump............30Hydraulic Torque Wrench Hose................30Torque Wrenches................................30, 31Torque Gun ...............................................30Ratchet Link ..............................................31Wrenches ..................................................31
Welding.............................................. 32-37Portable Weld Fume Extraction Unit ........32Portable Welding Fume Extractor.............32Welding Fume Extraction Base Unit ........32Welders .....................................................32Pulse Mig Gun...........................................33Plasma Cutters..........................................33Welding Lead ............................................33Wire Feeder...............................................33Propane Welders ......................................34Stick Welders ............................................34Tig Welder .................................................34Welding Remote ......................................35Oxygen/Acetylene Carts ...........................35MIG Welders .............................................35Welding Rod Ovens ..................................35Engine Driven Welders........................ 36-37Compact Welding and
Power Generator...................................37Heavy-Duty Welders .................................37
Pipe Beveling ..........................................38Hydratight..................................................38Welding Accessories.................................38
Air Compressors .............................. 39-41Heavy Duty Electric Powered
Air Compressor.....................................39Gas Powered Air Compressors ................39Portable Air Compressors.........................40Air Compressors .......................................41
Sanders & Grinders ................................42Angle Grinders & Sanders ........................42Hand Sanders ...........................................42Belt Sanders..............................................42
Saws .................................................. 43-44Reciprocating Saws ..................................43Band Saws................................................43Cutoff Machines.................................. 43-44Circular Saw..............................................44Jig Saw .....................................................44Tile Saw.....................................................44Worm Drive Saw .......................................44
Lighting....................................................45Explosion Proof Lighting...........................45Fluorescent Lights.....................................45Vapor Proof Drop Lights ...........................45Mechanical Drop Lights ............................45String Lights..............................................45LED String Lights.....................................45Magnetic Lights .......................................45
Halogen Lights ..........................................45Explosion Proof String Lights ..................45
Drills................................................... 46-47VSR Drill ....................................................46Right Angle Drill ........................................46Cordless Drill.............................................46Stud & Joist Drill .......................................46Electric Drill ...............................................46VSR Screwdriver .......................................46Shears .......................................................46Nibblers.....................................................46Impact Wrenches......................................46Cordless Impacts......................................47Table Grinder ............................................47Die Grinder ................................................47Rotary Hammer.........................................47Concrete Vibrators ....................................47
Core Drills ...............................................48
Magnetic Drills.................................. 49-50Magnetic Base Drills .................................49Carbide Magnetic Drill .............................50Slugger JHM Drill ......................................50
Rotary Hammers ....................................51Spline Rotary/Demo Hammer...................51Demolition Hammer ..................................51Rotary Hammers .......................................51Combination Hammers .............................51Hammer Drill .............................................51Breaker Hammer Kit .................................51
Rock Splitters and Breakers .................52Breakers ....................................................52Combihammer ..........................................52
Gantry Crane...........................................53EME Aluminum Gantry Cranes .................53
TABLE OF CONTENTS
38363_UR 2017_01-56_Tools.indd 1 4/12/17 9:52 AM
2 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Cooling, Ventilation & Vacuum
Cooling TrailersCat. Class: 920-5230
BDMC36CAir Horns EMC48B
CA24APE
Type Model Intake Weight Max psi Cat. Class
Axial Blower Allegro 8" 16 lbs. 115V 250-0995
Axial Blower Allegro 12" 28 lbs. 115V-230V 250-1000
Air Horn TexasPneumatic
3" 10 lbs. 40 - 100 250-1526
Air Horn TexasPneumatic
6" 25 lbs. 40 - 100 250-1529
Air Horn TexasPneumatic
8" 36 lbs. 40 - 100 250-1551
Air Horn TexasPneumatic
10" 43 lbs. 40 - 100 250-1570
Floor Fan BDMC36C 36" 116 lbs. — 250-1710
Floor Fan EMC48B 48" 165 lbs. — 250-2205
Floor Fan CA24APE 24" 82 lbs. — 250-2030
Evaporating Cooling Fans
Intake WaterReservoir
CoolingCapacity
Weight Speeds Cat. Class
16" 42 gallons 900 sq. ft. 130 lbs. 3 250-2208
24" 14 gallon 1800 sq .ft. 155 lbs. Variable 250-2213
36" 32 gallons 2500 sq .ft. 195 lbs. 1 250-2213
48" 40 gallons 4000 sq .ft. 345 lbs. 2 250-2210
Axial Blowers
38363_UR 2017_01-53_Tools.indd 2 3/14/17 10:48 AM
3Rent now at UnitedRentals.com/equipment
Tools / Cooling, Ventilation & Vacuum
9525-50EX 9525-50 Industrial Fan UB12E
Type Model Manufacturer Diameter CFM Cat. Class
Explosion Proof Blower 9525-50EX Allegro 20" 6837 250-2058
Non-Explosion Proof Blower 9525-50 Allegro 20" 7500 250-1013
Industrial Fan RAM I-30 Coenco 30" 13,000 250-2165
Explosion Resistant Blower 175 CV Coppus 8" 1500 250-1010
Explosion Resistant Blower UB12E Sure Flame 12" 2900 250-2064
Hepa Vacuums Shop Vacuums Turbo Vacuums
Type Brand Water Lift Water Capacity CFM Cat. Class
Hepa Vacuum Hilti VC 40 — 6.6 gals. 129 220-9810
Shop Vacuum MB-1300-OMEV 111" 13.0 gals. 108 220-9027
Turbo Vacuum Tornado 98451 239" 55 gals. 258 220-9030
38363_UR 2017_01-53_Tools.indd 3 3/14/17 10:48 AM
4 Call for current rates: 800.UR.RENTS (800-877-3687)
Chicago Pneumatic AirImpact WrenchesThe use of the latest technologies and materials,such as composite housing or steel housing for thetoughest materials, makes CP Industrial impacts thebest in each class. Our versatile line features differentclutches. The ranges provides impact from 3/8" to1-1/2" square drive sizes.
Model CP6500RSR
CP6060-SASAB
CP6060SASAK
CP0611PASED
CP6110PASEL
CP6120PASED
CP722 CP6120PASEL
Drive In 1/2" 3/4" 1" 1" #5 Spline 1-1/2" 3/8" 1-1/2"(#5 Spline)
Socket Retainer FrictionRing
Hole Hole Hole Integral Hole FrictionRing
Integral
Clutch Type Double-Dog
2-Jaw 2-Jaw 2-Jaw 2-Jaw 2-Jaw RockingDog
2-Jaw
Handle Style Pistol Pistol Pistol D Outside D InsideTrigger
D InsideTrigger
Butterfly D InsideTrigger
Torque Working(ft. lbs.)
360 650 650 900-1800 900-1800 2000 65 2000
Torque Max(ft. lbs.)
525 1000 1000 2800 2800 3500 90 3500
Air Flow (cfm) 25 59 59 48 85 95 13 95
Air Inlet 1/4 3/8 3/8 1/2 1/2 1/2 1/4 1/2
Cat. Class 110-1360 110-1370 110-1383 110-1380 110-1382 110-1385 110-1350 110-0015
Ingersoll RandAir Impact Wrench 2-1/2"The 588A1 is an impact tool like no other, having beendesigned expressly for the installation, assembly andmaintenance of extra heavy or high pressure equipmentwhere nuts must be applied or removed on bolts from 2" to4" in diameter. Typical applications are in steel mills, powerstations, oil refineries, chemical plants, shipyards and steamturbine manufacturing.
Model 588
Cat. Class 110-1390
Texas Pneumatic Ventilation Fans• Air Blower Pneumatic Fan
Model TXJF20 TXJF24
Bolt Circle Diameter 20" 24"
Weight 95 lbs. 132 lbs.
Inlet 3/4" 1"
Max psi 110 110
Cat. Class 250-0001 250-2105
Tools / Air Tools
38363_UR 2017_01-53_Tools.indd 4 3/14/17 10:48 AM
5
Tools / Air Tools
Rent now at UnitedRentals.com/equipment
Air Grinders• Powerful 1.25hp (950W) high performance motor for fast
metal removal• Aluminum alloy housing is rugged, yet lightweight• Spiral bevel gearing in angle head provides extended life and
smooth low vibration• Excellent for weld preparation and smoothing, rust removal,
deburring and blending of steel, cast iron and aluminum
Disc Cat. Class
4" 110-1253
4-1/2" 110-0008
7" 110-0009
Air Die Grinders• General Maintenance application die grinder• Productivity and control• Excellent for cleaning tires, moldings, porting, relieving
engines, and general high-speed polishing and grinding
Chuck Cat. Class
Angle 110-1240
Straight 110-1250
Air Hack Saws• 8"-37" Blades
Cat. Class: 625-0628
Clamps Cat. Class
Small 628-0007
Large 625-0006
Air DrillIndustrial maintenance duty anddesigned for smooth operation andextended tool life ideal tool for alltypes of maintenance work.
Chuck Cat. Class
3/8" 110-1274
1/2" 110-1276
Scabblers• Removing spalled or deteriorated concrete• Roughening surfaces for new overlayments• Reducing high spots or leveling uneven joints• Creating wheelchair access ramps• Sidewalk trip hazard repair• Removing epoxy• Creating slip-resistant surfaces• Texturing parking garage ramps• Breaking up ceramic tile
Heads Cat. Class
3-head 110-1150
5-head 110-1170
5 Head
3 Head
Tools / Air Tools
38363_UR 2017_01-56_Tools.indd 5 4/12/17 12:47 PM
6 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Air Tools
Size Hose Length Cat. Class
3/8" 50' 110-2250
1/2" 50' 110-2355
3/4" 50' 110-2400
2" 25' 110-3726
2" 50' 110-3727
Air Manifolds & ReceiversCan be used in any industry where there is a need to havemultiple outlets of air to supply various pneumatic toolssimultaneously.
Tank Volume Cat. Class
10 gal. 110-3340
60 gal. 110-1360
120 gal. 110-3630
240 gal. 110-3635
620 gal. 110-3640
Compressor Air Hose
38363_UR 2017_01-53_Tools.indd 6 3/14/17 10:48 AM
7Rent now at UnitedRentals.com/equipment
115Rock Drill
Model Number 307 133 1133 650 131 5201 5203
Manufacturer APT APT APT APT APT APT APT
Weight (lbs.) 6.7 30 33 14 37 31 37
Length 18-1/2" 22-1/2" 25-1/2" 15-1/4" 51-7/8" 22-1/2" 31"
CFM @ 90 psi 7 42-46 48-52 33-35 38-42 34-36 34-38
Blows per Minute 4000 1140 850 1650 670 1850 1850
Cat. Class 110-1342 110-0013 110-1640 110-1100 110-1830 110-1130 110-1136
307 Needle ScalerThe APT Model 307 Needle Scaler is a hard working tool that will clean irregularsurfaces and also remove rust, paint and other coatings from metal. Its 19, 7"long needles are also versatile enough to peen welded joints and remove slag, aswell as, clean castings, chip stone, concrete and brickwork.
Air BreakersAmerican Pneumatic Models 117, 140, 160 & 190
Tough and dependable, the high performance line of pneumatic breakers. All are designedfor best performance in their class and handle a variety of jobs from general demolition toroad building and foundation removal.
Rock DrillsAmerican Pneumatic Models 115, 137 & 155
APT rock drills are tough, versatile and dependable. Various models for fit you specificrequirements. The APT Model 109 and Model 115 are lightweight tools for drilling holesfor anchor bolts and small dowel hole drilling. The Model 137 and Model 155 are used forgeneral construction, utility work and plant maintenance. They are designed for drillingthrough granite, hard faced rock, quarry drilling and drilling secondary holes for blasting.
Rivet BustersAmerican Pneumatic Models 133 & 1133
They have the ability to perform all types of medium to heavy demolition work. With half theweight of the 60 lbs. class paving breakers, the ratio of their high impact energy versus theirweight make them the most efficient tool APT makes.
Clay & Trench DiggersAmerican Pneumatic Models 118 & 119
The rugged APT Clay and Trench Diggermodels are used for digging clay, shale,hard pan and frozen ground.
Backfill TamperAmerican Pneumatic Model 131
The APT Model 131 Backfill Tamper is usedfor soil compaction, temporary filling of holes,asphalt packing etc.
133RivetBuster
1133Rivet Buster
131Tamper
118Clay Digger
Model Number 115 137 M155 155 117 140 160 190
Manufacturer APT APT APT APT APT APT APT APT
Weight (lbs.) 19 38 61 61 N/A N/A N/A 91
Length N/A 19-3/4" 22-3/8" 22-3/8" N/A N/A N/A N/A
CFM @ 90 psi 32-36 85-90 50-60 110-120 34-38 48 60-65 75-80
Blows perMinute
2900 2300 2100 2100 1850 1500 1680 1350
Chuck Size 7/8" HEXx 3-1/4"
7/8"x 3-1/4"
7/8"x 3-1/4"
7/8"x 3-1/4"
1" HEXx 4-1/4"
1" HEXx 4-1/4"
1-1/4" HEXx 6"
1-1/4" HEXx 6"
Cat. Class 110-1650 110-1670 110-1680 110-1690 110-1550 110-1565 110-1570 110-1580
155Rock Drill
117Paving Breaker
160-190Paving Breaker
Tools / Air Tools
38363_UR 2017_01-53_Tools.indd 7 3/14/17 10:48 AM
8 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Boiler Tools
Wart Hog Milling Gun• Mounts rigidly to produce a clean, continuous chip• Requires no cutting lubricant• Simultaneously bevels, faces, and bores• Lightweight and requires no special training• Efficient chatter-free cutter blade locking design• Torque-free operation prevents operator fatigue• Low maintenance, compact, air-powered tool
A heavy-duty ratchet wrench and knurled knob allowseasy clamping and is perfect for limited access areas.
Model H-300 Cat. Class: 500-2005
Mongoose Milling Gun• Patented, self-centering, push-pull clamp and release
mechanism has permanently attached wrenches• Only 2-1/4" wide• Rugged with torque-free operation• Powerful pneumatic motor needs only 25 cfm air flow• Produces a thick chip without cutting oils• Easy-to-change mandrels• EscoLock™ blade locking system
Bevels, faces and bores stainless steel and other highlyalloyed tubing.
Model MG-500 Cat. Class: 500-2006
Ground Hog Milling Gun• Self-centering torque-free operation• Permanently attached clamps and wrenches• Rigidly mounts to tube I.D., easy to release• Sealed construction allows use in any orientation• Produces a smooth, continuous chip• Compact, low-maintenance end prep tool• Performs any angle of bevel• Steel housing with integral radial-thrust ball bearing• Chatter-free cutter blade locking design• Uses Tin coated cutter blades
Patented push-pull clamping and release system.
Model G-300 Cat. Class: 500-2007
38363_UR 2017_01-53_Tools.indd 8 3/14/17 10:48 AM
9Rent now at UnitedRentals.com/equipment
Tools / Electrician Tools
640 Electricians Cable Puller• An economical puller with enough power for most jobs• Length 21"• Width 21"• Height 12"• Pulling Force (Maximum) 4000 lbs.• Pulling Force (Continuous) 2500 lbs.• Weight 82 lbs.
Cat. Class: 200-0016
6805 Electricians Cable Puller• Versi-Boom™ System allows you to make versatile and
fast set-ups and pull 10' (3 mm) or 20' (6 mm) of extracable easily
• Uses standard 3" rigid steel conduit for boom• Direct gear drive• Lightweight• Portable• Pulling Force Maximum - 8000 lbs. (35.8 kN)• Continuous - 6500 lbs. Versi-Boom™ System allows you
to make versatile and fast set-ups and pull 10' (3 mm)or 20' (6 mm) of extra cable easily
Cat. Class: 200-5000
Conduit Benders
Model 555 855 881
Amperage Rating 20 AMP GFCI-Protected Receptacle 20 AMP GFCI-Protected Receptacle —
Voltage Rating 120 VAC 120 VAC 120 VAC
Degree of Bend — — 90°
Weight 260 lbs. — 999 lbs.
Cat. Class 200-1200 200-7910 200-1050
555 855 881
38363_UR 2017_01-53_Tools.indd 9 3/14/17 10:48 AM
10 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Electrician Tools
885 Hydraulic Bender• Make elbows, offsets and saddles• Easy-to-use ram travel scale & charts for accurate bends• Cap: 1-1/4" to 5" Rigid Conduit• Optional Die / PVC Rigid• Optional Shoe - 5" Pipe
Model Cat. Class
885 Bender 200-1500
1802 Table 200-1155
842 Manual Bender• Strong, stable square hook design• 1-1/2" bender heads both offer the power pedal feature
with a larger foot area on the head for greater control,stability and leverage
• 1/2", 3/4" & 1" bender heads all have enlarged foot pedalsand increased toe room to ensure greater control, stabilityand leverage
Type Cat. Class
EMT 1/2" 200-1350
EMT 1" 200-1300
EMT 3/4" 200-1450
Mech 1/2"-1" 200-1802
1801 Mechanical Bender• Ratchet action for increased leverage• Bypass the ratchet for fast, direct bending on smaller sizes• Built-in bending degree indicator and easy to use bending
charts for accurate, consistent bends• Does not include handle• Centerline Bend Radius: 8-1/16" (204.800 MM) -9-11/16"
(246.100 MM) Rigid For 1-1/4" to 1-1/2" Rigid• Conduit Conduit Type: IMC, Rigid
Cat. Class: 200-1801
847 PVC Heater/Bender• Easy to use preheat for 10 minutes• Heavy-duty metal construction with reflective interior for fast,
efficient heating• Has heating chart, timer, and on/off switch with
indicator light for added convenience• Double doors with piano hinges allow heating shorter
lengths with one door open• Heats 65" long section of pipeg
Cat. Class: 200-6200
38363_UR 2017_01-53_Tools.indd 10 3/14/17 10:48 AM
11Rent now at UnitedRentals.com/equipment
Tools / Electrician Tools
UUT10-22 W/Chain Mount• 2-Speed motor that delivers the fastest pulling time for all
pulling needs over the widest (10000 lbs.) range• 0-6500 lbs. (0-28.9 KN) Continuous Operation• 6500-8000 lbs. (28.9-35.6 KN) 15 MINT ON/15 MINT OFF• 8000-10000 lbs. (35.6-44.5 KN) Momentary
Cat. Class: 200-5080
6810 Cable Feeder• Accommodates cable ranging in size up to 3.5" (88.9 mm)
in diameter• Two loading methods: top-loading and end-loading• Reel weight capacity – 25,000 lbs.• Maximum Tracking Force – 200 lbs.
Max. Cable Capacity8 x 250 MCM6 x 500 MCM5 x 750 MCM
Cat. Class: 200-5110
Model Reel Diameter Capacity Cat-Class
656 58"-90" 3750 lbs. 200-7000
683 46"-96" 2500 lbs. 200-7100
687 28"-56" 2500 lbs. 200-7200
Greenlee Reel Jacks
G3 Tugger• High-speed pulls up to 1000 lbs.• Continuous Rating 1200 lbs.• Intermittent 2000 lbs.• Patented push-pull clamping
and release system
Cat. Class: 200-0018
UT10 Tugger - Electric• 2 Speed Ultra Tugger (UT10-2S) is
a one-stop-shop• The no-load high speed is 16 FT/
MINT and is best suited for loadsup to 4000 lbs. where the speedwill be 12 FT/MINT
• The no-load low speed is 9 FT/MINT and can be used on loads upto 8000 lbs. where the speed willbe 6 FT/MINT
• Momentary peak capacity of10,000 lbs
Cat. Class: 200-5100
38363_UR 2017_01-53_Tools.indd 11 3/14/17 10:48 AM
12 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Electrician Tools
615 Cable ReelRoller• Handles up to 15 ton
cable reels• One roller adjusts for
various reel sizes• Weight: 2500 lbs.• Length: 8'• Width: 5'
Cat. Class: 200-8795
Radius Sheave• Yokes with cast steel
closuretype hooks witha 1" (25.4 mm) opening
• 5" (127 mm) widealuminum alloy sheaves
• Capacity: 4000 lbs.
Length Cat. Class
24" 200-8732
36" 200-8735
48" 200-8740
Wheel 2 Ton 4 Ton
6" 500-6303 —
12" 500-6304 500-6308
18" 500-6305 260-5005
24" 500-6407 260-5045
Hook Sheaves Double Yolk Sheave• 9-13/16" minimum radius• Forged steel closure type hook with 1" (25.4 mm) opening• 5" (127 mm) wide aluminum alloy sheave with
selflubricating bearings• Capacity: 4000 lbs.
Cat. Class: 200-5108
Triple Sheave• Adjustable center sheave for 19-1/2" (495 mm) or 36"
(914 mm) radius• Capacity: 6500 lbs.
Cat. Class: 200-8745
Tray Sheave• Steel frame easily attaches to cable tray up to 2" thick
Length Cat. Class
12" 500-6311
22" 500-6310
Radius Cable Roller
Range Cat. Class
12-18" 200-8620
20-24" 200-8630
30-36" 200-8650
Right Angle Tray Rollers 90°
Range Cat. Class
24" 200-8625
36" 200-8660
38363_UR 2017_01-53_Tools.indd 12 3/14/17 10:48 AM
13Rent now at UnitedRentals.com/equipment
Tools / Electrician Tools
Cable Tray Roller• Quick adjust push button to tightly fasten onto tray• 4 conveyer roller guide with retained spring pull-pin release
to easily remove cable• Capacity: 100 lbs.• Cable Size: 4"
Cat. Class: 200-8705
Tray Roller Straight
Range Cat. Class
12-18" 200-8615
20-24" 200-8630
24-30" 200-8640
30-36" 200-8650
Wire Reel Dispensers
Model Spindles Capacity Max Spool Width Width Access Cat. Class
909 6 2500' 13" 30" 200-7695
910 10 2500' 14.18" 36" 200-2570
20 TON Reel Jack• Five hooks; top fits up to 3-1/2" spindles, next
down fits up to 3" spindles, and lowest three fitup to 2-3/8" spindles
• Capacity Range: 5-20 tons• Stroke Range – 9.5-14"
• Minimum Height – 21-34.5"
Cat. Class: 200-7250
Type Cat. Class
100’ Steel 200-2115
100’ Nylon 200-2110
200’ Steel 200-2120
Fish Tape
38363_UR 2017_01-53_Tools.indd 13 3/14/17 10:48 AM
14 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Electrician Tools
Type Manufacturer Model Capacity Cat. Class
Cordless Greenlee EK12IDL11 12 Ton 850-7080
Cordless Greenlee EK1240L11 12 Ton 850-7090
Manual Hydraulic Greenlee HK12ID 6 AWG 200-2010
Manual Hydraulic Greenlee 1990 24,000 lbs. 200-5130
Manual Greenlee 1981 8 AWG 800-4510
Manual Hydraulic Greenlee HKL1232 24,000 lbs. 800-4510
Aluminum Greenlee KD12AL — 850-7096
Copper Greenlee KD12CU — 850-7097
1990EK1240L11
HK12ID
EK12IDL11
1981 HKL1232 KD12AL KD12CU
Crimpers & Die Sets
Type Manufacturer Model Capacity Cat. Class
Hydraulic Greenlee SDK105 4.13" 851-6095
Battery Greenlee ESG01L11 2" 851-6096
Hydraulic Greenlee HK520 1/2" to 7/16" 850-6107
SDK105
ESG50L11
HK520
Cutters
38363_UR 2017_01-53_Tools.indd 14 3/14/17 10:48 AM
15Rent now at UnitedRentals.com/equipment
Tools / Punches
Type Manufacturer Model Capacity Standard Dies Slug Splitter Cat. Class
Hydraulic Greenlee 7310SB 10 GA Mild Steel 2-1/2" to 4" 1/2" to 2" 200-4250
Knockout Greenlee 7238SB 10 GA Mild Steel 1/2" to 2" — 200-7452
Hydraulic Greenlee 7906SB 16 GA Mild Steel 1/2" to 2" 1/2" to 1-1/4" 200-7653
Hydraulic Greenlee 7306SB 10 GA Mild Steel 1/2" to 4" 1/2" to 2" 200-7653
Battery Greenlee LS50L11B 6 Ton 2" to 6" — 200-7654
Hydraulic Enerpac SP-35 35 Ton 1/4" to 3/4" — 200-0006
Hydraulic Enerpac SP-50 50 Ton 17/32"-1 to 1/32" — 200-0106
7310SB7238SB 7906SB 7306SB
LS50L11B
SP-35 SP-50
Punches
38363_UR 2017_01-53_Tools.indd 15 3/14/17 10:48 AM
16 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Hoisting
PROFI Air Powered Chain Hoists• Unlimited duty cycle for continuous operation• Rugged construction, minimum headroom• Impervious to dust, vapors, humidity and temperatures• Explosion proof• Variable speed control
Model 1-2 TI 1.5/3 TI 3/6 Ti 10/12 TI 16/20 TI 30 TI 50 TI
Chain Hoist Air (lbs.) 2000/4000 3000/6000 6000/12,000 20,000/24,000 32,000/40,000 60,000 100,000
Cat. Class 260-1710 260-1720 260-1735 260-1740 260-1745 260-1750 260-1760
Model Capacity Capacity Standard Lift Chain Pull to Lift Load Chain Shpg. Cat. ClassNumber (Tons) (kg) (ft.) Full Load (lbs.) Falls Wt. (lbs.)
LHH-.5B-20LL 1/2 454 20' 55 1 30 260-1850
LHH-.5B-30LL 1/2 454 30' 55 1 40 260-1850
LHH-1B-20LL 1 907 20 53 1 37 260-1851
LHH-1B-30LL 1 907 30' 53 1 48 260-1851
LHH-1.5B-20LL 1-1/2 1361 20' 65 1 50 260-1855
LHH-1.5B-30LL 1-1/2 1361 30' 65 1 64 260-1855
LHH-2B-20LL 2 1814 20' 74 1 63 260-1860
LHH-2B-30LL 2 1814 30' 74 1 80 260-1860
LHH-3B-20LL 3 2722 20' 84 1 90 260-1865
LHH-3B-30LL 3 2722 30' 84 1 114 260-1865
LHH-5B-20LL 5 4540 20' 79 3 108 260-1870
LHH-5B-30LL 5 4540 30 79 3 139 260-1870
Coffing Series LHH Hand Chain HoistThe Coffing LHH hand chain hoists features stamped steel and acompact, lightweight design ideal for construction and contractorapplications where portability and easy rigging are critical.• Compact gear housing provides low headroom• Lubricated gearing ensure smooth and efficient operation with
minimal effort• Mechanical load brake engages instantly for precise load holding
and positioning• 360° swivel hooks with safety latches for positive
load engagement• Hardened load chain provides added strength and wear
resistance for greater chain life• Stamped steel housing withstands rugged conditions• Designed for easy inspection and maintenance• ASME B30.16• Load Limiter
38363_UR 2017_01-53_Tools.indd 16 3/14/17 10:48 AM
17Rent now at UnitedRentals.com/equipment
Tools / Hoisting
Coffing BC BeamClamp• Capacities from 1 to 10 Tons
Designed to fit the flanges of RSJsand Universal beams and act as asemi-permanent lifting point for usewith manual and powered hoists.
Model TCR500-C-30 TCR6000P2-20
Chain Hoist Air (lbs.) 2000 4000
Cat. Class 260-1700 260-1730
Model Capacity Capacity Standard Lift Min Dis. Between Handle Force at Lever Length Shipping Cat. ClassNumber (Tons) (kg) (ft.) Hooks (in.) Full Load (lbs) (in.) Wt. (lbs.)
BAN07510LL 3⁄4 750 10' 12.8" 45 9.63" 16 260-3005
BAN07520LL 3⁄4 750 20' 12.8" 45 9.63" 20 260-3005
BAN15010LL 1-1⁄2 1500 10' 14.2" 64 10.25" 24 260-3015
BAN15020LL 1-1⁄2 1500 20' 14.2" 64 10.25" 32 260-3015
BAN30010LL 3 3000 10' 17.5" 73 16.37" 46 260-3055
BAN30020LL 3 3000 20 17.5" 73 16.37" 61 260-3055
BAN60010LL 6 6000 10' 22" 93 16.37" 78 260-3060
BAN60020LL 6 6000 20' 22" 93 16.37" 108 260-3060
CM Bandit Ratchet Lever HoistThe CM® Bandit™ is one of the most compact and durable ratchetlever hoists in the industry. Its lightweight and portable design, easyfree-chaining feature and 360° rotating handle make it one of themost versatile hoists on the market today. Now available in 3/4,1-1/2, 3 and 6 ton capacities for all of your pulling and lifting needs.• Rugged yet lightweight design and construction is easily
transported and rigged even in the most confining spaces• Easy free chaining feature allows for quick take up and
positioning of slack chain. Designed not to accidently free chainwhile under load
• Double reduction gearing along with short cushioned grip handleprovides easy operation with minimal handle effort
• Impact resistant stamped steel with powder coat finish for extraprotection when working in harsh environments
• Enclosed Weston type load brake stays clean and dry for positiveload positioning
• Upper and lower hook blocks are bolted on for easy removal andinspection and have forged safety latches as standard
• Meets ASME B30.21• 100% Load Tested Zinc Plated Chain• Load Limiter
38363_UR 2017_01-53_Tools.indd 17 3/14/17 10:48 AM
18 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Hoisting
CM LODESTAR Electric Chain HoistLegendary in performance the new Lodestarfeatures quieter operation, an environment friendlydesign, easier access to components, higherduty cycles, less maintenance and enhancedsafety features.• Less Maintenance & Long Service Life - heavy
duty DC brake, lifetime grease-lubricated gearbox, heavy duty rated motors, 5-pocket lift wheel,zinc plated chain, and precision gears
• Improved serviceability - easy access to theClutch, Motor, Electrical Control Panel and BrakeAssembly. Finger safe wiring and plug-and-playconnectors
• Improved load safety - clutch is located outsidethe load path which prevents slipping of theload in an overload condition when brake isnot powered
• Fabric chain container and rigid hook suspensionstandard on every Lodestar. Lug mount availableupon request
• Lifetime Warranty• Metric rated. CSA Approved. ASME B30.16• Made in the U.S.A.• AC Electrical Brake or Double DC Brake available• Variable speed drives (VFD) or traditional
2 speeds available
Single Speed Single Phase 3 Phase 3 Phase115V-1-60 230/460V-3-60 575V-3-60
Capacity Capacity Standard Lift Speed Item Shpg. Wt Item Shpg. Wt Item Shpg. Wt(Ton) (kg) Lift (ft.) (ft./min) Number (lbs.) Number (lbs.) Number (lbs.) Cat. Class
1/4 227 10 16 2722NH 53 2725NH 61 9794NH 61 260-2095
1/4 227 10 32 2732NH 61 2735NH 64 9412NH 64 260-2095
1/2 454 10 16 2752NH 61 2755NH 65 9448NH 65 260-1800
1/2 454 10 32 3512NH 110 3515NH 110 9206NH 110 260-1800
1 907 10 8 2762NH 72 2765NH 73 9466NH 73 260-1805
1 907 10 16 3522NH 113 3525NH 110 9236NH 110 260-1805
2 1814 10 8 3532NH 131 3535NH 130 9266NH 130 260-1810
2 1814 10 16 — — 3565NH 135 9280NH 135 260-1810
3 2721 10 5.5 9501NH 158 9505NH 158 9533NH 158 260-1817
3 2721 10 11 — — 9508NH 162 9538NH 162 260-1817
Beam Trollies1/2 ton to 30 ton
Cat. Classes: 260-0006 to 260-0695
Snatch Blocks1-1/2 ton to 30 ton
Cat. Classes: 260-8920 to 260-9097
Units spooled with new wire for each order*Certification available*
*All hoists tested and certified prior to each rental*Ingersoll Rand, Harrington, JD Nuehaus
Shackles3/8"-3/4 ton to 2"-85 ton
Cat. Classes: 330-9536 to 330-9921
Roustabouts
Model Manufacturer Height Weight Cat. Class
R-150 Sumner 15' 336 lbs. 330-9625
R-180 Sumner 18' 403 lbs. 330-9618
R-250 Sumner 25' 493 lbs. 330-9615
38363_UR 2017_01-53_Tools.indd 18 3/14/17 10:48 AM
19Rent now at UnitedRentals.com/equipment
Tools / Hoisting & Tuggers
Air Powered TuggersAir Winch, Planetary Gear Type, Max. Pull Single Line 1000 lbs., Length 19.81", Width 10", Height 15", Recommended WireRope Dia. 1/4", Capacity of Recommended Wire Rope 228', Drum Width 4.5", Gear Ratio 54:1, Required Pressure 90 psi,Air Consumption 50 SCFM, Inlet 1/2", Hose Size 3/4", 1st Layer Line Pull 1200 lbs., 1st Layer Line Speed 37 FPM, ANSI /ASME B30.7 Standards, Includes Manual Band Brake, Free Spool Clutch.
Model Description Cat. Class
BU7A Cable Winch Air Tugger 1000# 260-2305
EU Cable Winch Air Tugger 2000# 260-2310
H5U Cable Winch Air Tugger 3000# 260-2315
FA2I-24MX1E Cable Winch Air Tugger 4000# 260-2320
FA2.5A-20MX1E Cable Winch Air Tugger 5000# 260-2325
W3036LAABG Cable Winch Air Tugger 6000# 260-2330
FA5A-24MXI Cable Winch Air Tugger 10,000# 260-2340
FA2I-24MX1E IR FA5A-24MXI
Roller Lifts Hydraulic Jack/Dolly – Pair
Lift ForksLength
Fork Adjustable Capacity Height Width Cat. Class
12" to13/16" 6" 5" to 1-1/2" 4000 lbs. 44" 23" 200-7300
4" to 3/4" 6" 6"-19 to 1/2" 6000 lbs. 42"-1/2" 23" 200-7300
Electric Tuggers1/2 to 4 ton Capacity
Cat. Classes: 260-2145 to 260-2395
Pipe Dolly(Grass Hopper)• Lift up to 2000 lbs. (900 kg) unassisted• Special sliding chain block design accommodates long
and short loads• Carries up to 20" (500 mm) diameter pipe, tool boxes,
fittings and valves• Fits through 35" (89 cm) openings, is a versatile
12' (3.6 m) long and weighs only 165 lbs. (75 kg)• Rugged high pressure tires and wheels allow for
construction site mobility• Chains can be used to lock wheels for security
Cat. Class: 500-0013
Units spooled with new wire for each order*Certification available*
*All hoists tested and certified prior to each rental*Ingersoll Rand, Harrington, JD Nuehaus
38363_UR 2017_01-53_Tools.indd 19 3/14/17 10:48 AM
20 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Jacks & Lifts
MaxJacks
A-RollJacks
V-HeadJacks
RollJacks
Type Capacity Pipe Capacity Cat. Class
Max Jack 2500 lbs. 4" to 36" 500-1820
Roll Jack 2000 lbs. 2" to 30" 500-1622
A-Roll Jack 2500 lbs. 1-1/4" to 24" 500-1615
V-Head Jack 2500 lbs. Max 12" 500-1620
Porta Powers• Single Action – Low Profile• 1/2 ton to 100 ton
Cat. Classes: 210-4602 to 210-5160
Bottle Jacks
Bottle Jacks• Ideal for low profile requirements where
normal bottle jacks just won't fit• Designed for vertical lifting requirements in
automotive and ag repair shops, on loadingdocks, in industrial environments, on factoryfloors, and more
Capacity Cat. Class
1-3 Ton 270-1099
4-12 Ton 270-1100
14-22 Ton 270-1105
30-50 Ton 270-1110
55-60 Ton 270-1115
100 Ton 270-1010
Model Capacity Cat. Class
ZU4308KB 2 gal. 210-4603
PUJ 1200 0.5 gal. 210-5240
PUJ 1201B 2 gal. 210-5240
Electric HydraulicPumps
Machine Skates
Capacity Cat. Class
7.5 Ton 330-6134
10 Ton 330-6140
15 Ton 330-6150
30 Ton 330-6160
60 Ton 330-6170
Electric Hydraulic Pumps
Hand Hydraulic PumpUltima Series Steel lightweight pump has an ergonomic gripand operates with reduced effort, for less operator fatigue.• Vent-free reservoir helps eliminate spills• 2-stage pump has high flow at low pressure and low flow
at higher pressure• Use in horizontal or vertical position with head downward• Internal pressure relief valve
Model Capacity Cat. Class
P39 100 cu. in. 210-5330
P80 100-800 cu. in. 210-5335
38363_UR 2017_01-53_Tools.indd 20 3/14/17 10:48 AM
21Rent now at UnitedRentals.com/equipment
Tools / Piping
Hydrostatic Test Pump Air• Efficient air operated pump• Wide range of pressures/volumes• Easy to operate controls• Output pressure regulation control• Portable light weight design• Low center of gravity• Semi-pneumatic tires• Low maintenance mounted regulatior• Lubricator• Glycerin filled test gauge• Water inlet suction strainer
Model Cat. Class
PDQCC 10000 545-9830
Ridgid Geared Threader• 141 threads 2-1/2", 3", 3-1/2", 4" pipe with one set
of dies• Jaw clutch prevents jamming• Simple adjustment for tapered or straight threads• Cam-type workholder sets instantly• Fully enclosed gearing• Right-hand only
Model Cat. Class
141 500-1530
Ridgid Threading Machine• Pipe Capacity: 1/8"-2" (3mm-50mm)
pipe, 2-1/4"-4" with 141, and 4"-6"with 161 Geared Threaders; 1/4"-2"(6mm-50mm) rod
• Recessed On/Off/Reverse switch• 115V, 38 RPM approved by CSA to
CSA and UL standards• Rear Centering Device: Cam-action
turns with chuck
Model Cat. Class
300 500-1515
Ridgid Threading Machine• Pipe Capacity: 1/8"-2" (3mm-50mm)
2-1/2"-4" (62mm-100mm), 4"-6"(100mm-150mm) with 141 and 161geared threaders
• Bolt Capacity: 1/4"-2"• Motor: 1/2 HP, single-phase, 115V,
50/60 Hz, 15 amp reversibleuniversal motor. (36 RPM)
• Switches: FOR/OFF/REV and Integralsafety foot switch
• Cutters: self-centering, full-floating• Large 1.75 gallon oil tray
Model Cat. Class
535 500-1512
Ridgid Threading Machine• Pipe Capacity: 1/4" 4" (6mm-100mm)
4"-6" (100mm-150mm) with161 Geared Threader
• Bolt Capacity: 1/4"-2"• Motor: 1 1/2 HP, single-phase,
60 Hz or 50 Hz, induction type• Gear Box: Two-speed gear box
3:1 ratio
Model Cat. Class
1224 500-1527
38363_UR 2017_01-56_Tools.indd 21 4/12/17 12:47 PM
22 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Piping
Pit Bull
500-0884500-0882
500-0885
Track Unit
500-0883
500-0887
500-0886
500-0890
Type Capacity Cat. Class
14 Pit Bull 1"-4" 500-0883
26 Pit Bull 2"-6" 500-0884
28 Rolling Unit 2"-8" 500-0882
412 Rolling Unit 6"-18" 500-0887
618 Rolling Unit 6"-18" 500-0886
824 Rolling Unit 8"-24" 500-0890
618 Track Unit 6"-18" 500-0885
Rolling Unit
Pit Bull14
Pit Bull26
Rolling28
Rolling412
Rolling618
Mega MC824
Track618
Advanced blade design for smooth face and long life ✓ ✓ ✓ ✓ ✓ ✓ ✓
ISO-compliant industrial Teflon-coated heater plates ✓ ✓ ✓ ✓ ✓ ✓ ✓
Patented Centerline Guidance System for equal distribution of force aroundthe joint
✓ ✓ ✓ ✓ ✓ ✓ ✓
Serrated jaws and inserts keep pipe from slipping during fusion ✓ ✓ ✓ ✓ ✓ ✓ ✓
Hard-anodized aluminum wear surfaces for corrosion resistance ✓ ✓ ✓ ✓ ✓ ✓
Thrust-bearing-equipped clamp knobs to minimize force required to clampand round pipe
✓ ✓ ✓ ✓ ✓ ✓
Microprocessor-controlled heater ✓ ✓ ✓ ✓ ✓
Lightweight heater design with 45° handle to prevent overheating ✓ ✓ ✓
Reversible jaws, clamp knobs, levers & facer allow operator to fuse fromeither side of machine
✓ ✓
Semi-automatic locking cam system maintains force during cooling ✓ ✓
DataLogger® compatible ✓ ✓ ✓ ✓ ✓
High-force cylinder machine available ✓ ✓ ✓ ✓ ✓
Industry standard semi-automatic hydraulic control system ✓ ✓ ✓ ✓ ✓
Low-force cylinder machine available ✓ ✓ ✓ ✓ ✓
Powerful hydraulic facer for facing the toughest pipe with ease ✓ ✓ ✓ ✓ ✓
Removable 3- or 4-jaw carriage for close quarter use ✓ ✓ ✓ ✓ ✓
Available in Combination Unit (CU) for sidewall fusion ✓
Large capacity 2-stage hydraulic pump for cool oil at max operating pressure ✓
Hydraulic clamping available ✓ ✓ ✓ ✓
Hydraulic pipe lifts ✓ ✓ ✓ ✓
Medium-force cylinder machine available ✓ ✓ ✓ ✓
Gas-powered models available ✓ ✓ ✓
On-board generator for powering heater ✓ ✓ ✓
Heater and facer can be easily converted to top-loading for confined spaces ✓
Rugged outriggers for added stability ✓
Automated Machine Option ✓
Battery disconnect for easy lockout ✓
Dual Speed tracks ✓
Self-contained, self-propelled, all-terrain ✓
Self-locking brakes ✓
38363_UR 2017_01-53_Tools.indd 22 3/14/17 10:48 AM
23Rent now at UnitedRentals.com/equipment
Tools / Piping
Pipe Line Up Clamps
Range Cat. Class
1"-8" 500-1398
2"-4" 500-1400
4"-6" 500-1403
6"-12" 500-1410
10"-36" 500-1415
14"-24" 500-1420
500-1510 500-1520
Type Dies Cat. Class
700 Pipe Threader 1/4"-2" 500-1510
Manual Pipe Threader 1/2"-2" 500-1520
Rotary Pipe Cutter
Range Cat. Class
5"-8" 500-1191
10"-14" 500-1196
20" 500-1197
24" 500-1198
Hinged Pipe Cutter
Range Cat. Class
4"-6" 500-1175
6"-8" 500-1182
8"-12" 500-1186
Manual Pipe Cutters
Range Cat. Class
1/8"-2" 500-1245
3"-4" 500-1250
10"-14" 500-1270
16"-18" 500-1272
Wheeler Rex 3890-24
Hydraulic Pipe Cutter 24"Pipes
Cat. Class: 500-1275
161 Gear Head 4" to 6"Pipe• Links to 700 or 535 threaders• With adaptor
Cat. Class: 500-1540
Pipe Vise Stand
Cat. Class: 500-1610
Pipe Threader
38363_UR 2017_01-56_Tools.indd 23 4/12/17 9:52 AM
24 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Piping
HKL1232
Bench Pipe Vises
Range Cat. Class
4" 500-1052
6" 500-1056
Soil Pipe Cutters• 2" to 6"
Cat. Class: 500-1223 to 500-1230
73-30573-310
FS56
FSM8FSH14
Pipe Jeep Meters
Model Capacity Cat. Class
790SPY 5-35V 500-2600
785SPY 1-15V 500-2600
715 1-15V 500-2600
Hydraulic Pipe Crimper• 1/2"-2" Pipe Range
Cat. Class: 850-7095
WR15
FS109WR5
Flange Spreaders
Type Model Capacity Cat. Class
Manual 73-305 3/4-20 500-0004
Manual 73-310 12-48 500-0019
Hydraulic WR5/WR15 1 Ton 270-1195
Hydraulic FS56 5 Ton 500-0001
Hydraulic FSM8 8 Ton 500-0250
Hydraulic FS109 10 Ton 500-0018
Hydraulic FSH14 14 Ton 500-0250
Hydraulic SWI202TE 25 Ton 500-0260
Ratchet Pop-It HD0535 15 Ton 500-0003
Ratchet Pop-it 95-525 10,000 lbs. 500-0002
Pop-ItHD0535
Pop-It95-525
38363_UR 2017_01-56_Tools.indd 24 4/12/17 12:47 PM
25Rent now at UnitedRentals.com/equipment
Tools / Piping
Ridgid Roll Groovers
• Handle Pipe from 1" up to 24" Diameter• Special Dies Available for Copper Pipe• All Units Attach to Ridgid Pipe Threaders
Model Type Capacity Cat. Class
915 Manual 2" to 12" 200-7880
916 Electric 1-1/4" to 6" 200-7878
918-I Hydraulic 1" to 12" 200-7872
920 Electric 2" to 24" 200-7874
*Confirm w/Tool hub staff that Groover sets match piping requirements
38363_UR 2017_01-53_Tools.indd 25 3/14/17 10:48 AM
26 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Mobile Tool Room & Pro-Boxes
On-Site Tool Management forLarge ProjectsOur onsite Mobile Tool Rooms are customstocked with tools and supplies for yourproject, and include United Rentals’ trackingand management software. Delivered to yourjobsite, your Mobile Tool Room is managed bya United Rentals tools expert who checks outtools (via our scanning system) to authorizedusers, inspects tools upon return, and providesmaintenance services and safety oversight.
Improve Productivity andyour Bottom LineOnsite tool management improves efficiency,streamlines operations, reduces costs and deliversvalue. Our tool solutions ensure tool availability foryour crews and help maintain control over inventorywhile saving you money on storage, warehousing,costly tool repairs and maintenance.
38363_UR 2017_01-56_Tools.indd 26 3/21/17 11:50 AM
27Rent now at UnitedRentals.com/equipment
Tools / Mobile Tool Room & Pro-Boxes
Pro-BoxCustom Stocked Gang Boxes Delivered to Your Site.United Rentals’ Pro-Box is stocked with tools and suppliesspecically for your project. This convenient tool solution isperfect for projects that require a limited range of tools andsupplies.
CONVENIENCE IS A PRO-BOX
United Rentals’ Pro-Box is a cost-effective solutionto supplement your existing tools for job-specificrequirements.• The right tools for your job• Avoid costly repairs and maintenance of ownership• Completely custom stocked• Convenient for traveling contractors• Delivery and pick up available• Hoisting • Hydraulic Torque Wrenches• Cutters • Hammers• Pliers • Punches• Saws • Tape Measures• Sockets & Wrenches
Capacity Size Cat. Class
3 cu. ft. L 30" W 16" H 12" 920-1300
16 cu. ft. L 48" W 24" H 28" 920-1305
24 cu. ft. L 48" W 30" H 34" 920-1310
35 cu. ft. L 60" W 30" H 34" 920-1315
47 cu. ft. L 60" W 30" H 46" 920-1320
47 cu. ft. L 60" W 24" H 60" 920-1320
120 cu. ft. L 60" W 44" H 82" 920-1325
United Rentals Mobile Tools RoomCustom built 40' mobile tool trailer
Cat. Class: 920-5240
38363_UR 2017_01-53_Tools.indd 27 3/14/17 10:48 AM
28 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Mobile Tool Room & Pro-Boxes
Sample Tool List – Electrician's Pro-Box• Punch/Knock-Outset• Cable Cutters• Cable Strippers• Crimper-Manual• Die Heads• Drill 1/2" Cordless• Drill 1/2" Electric• Hammer: Ball Pein 16 oz.• Allen Wrench Set• Pipe Tool Tristand• Chain Vise• Pipe Wrench• Pliers-Slip Joint
• Reamer, Pipe Ratchet• Sawzall Cordless• Reel Jacks Large• Rotary Hammer• Hand Hacksaw• Portaband Electric• Screwdriver• Spindle-Cable Reel Stand• Strap Wrench• Tape Measure-50’• Fish Tape 100’ W/Case• Volt-Ohm/Amperage• Volt-Ohm/Megger• Wrench-Adjustable
Other Pro-Box Options• Steel Erecting• Plumbing• Mechanical• Carpentry• General Construction
Sockets and Wrenches
Description Sizes Cat. Class
Standard PipeWrenches
6" to 60" 500-1303 to500-1355
Aluminum PipeWrenches 850-4782
10" to 48" 500-9426 to500-9436
Channel LockWrenches
420- 480(including Brass)
850-4713 to850-4718
Scaffold Wrench 675-9371
Combo Wrenches(Brass available)
5/16" to 3-7/8" 851-0300 to851-0352
Crescent Wrenches 6" to 24" 851-0996 to851-1008
Adjustable SpudWrenches
— 851-2101
Spud Wrenches Box 851-2102 to851-2138
Open 851-2145 to851-2176
3/8" Ratchet Set Standard 850-4780
Deep Socket 850-4782
1/2" Ratchet Set Standard 850-2535
3/4" Ratchet Set Standard 850-2540
1/2" Drive 5 Piece 850-2543
1/2" Drive Metric 850-4778
3/8" Drive Standard 850-4780
Description Sizes Cat. Class
3/8" Drive Metric 850-4781
3/8" Drive DW — 850-4782
1/2" Drive DW — 850-4783
3/8" Drive 6MM- 24MM STD 850-4784
3/8" Drive 6MM- 24MM DW 850-4785
1/2" Drive 10MM- 24MM STD 850-4786
1/2" Drive 10MM- 24MM DW 850-4787
Allen/Hex Key Standard 850-4927
1" Drive Chrome 29 piece 750-1320
1/2" Drive Chrome 12 piece 850-1323
1/2" Drive Chrome 18 piece 850-1324
1/4" Drive Chrome 25 piece 850-1325
3/4" Drive Chrome 29 piece 850-1327
3/8" Drive Metric 16 piece 850-1328
3/8" Drive Chrome 13 pieces 850-1329
3/8" Drive Chrome 21 pieces 850-1330
3/4" Drive Impact 13 pieces 850-1350
1/2" Drive Impact 13 pieces 850-1500
1/2" Drive Chrome 24 Pieces 850-2535
1/2" Drive 11 piece 850-2545
38363_UR 2017_01-53_Tools.indd 28 3/14/17 10:48 AM
29Rent now at UnitedRentals.com/equipment
Tools / Mobile Tool Room & Pro Boxes
Pliers, Clamps and Cutting
Description Sizes Cat. Class
Pliers 8"Diagonal 850-2189
8" Lineman 850-2193
9" High Lev. 850-2195
C Clamp Pliers 11" 850-4719
Vice Grip Pliers 7" Curved 850-2203
7" Flat 850-2207
10" Curved 850-2201
10" Flat 850-2205
C-Clamps 3" 850-5139
4" 850-5152
6" 850-5156
8" 850-5159
10" 850-5143
12" 850-5145
Description Sizes Cat. Class
Ultra Clamps 2" to 6" 500-6320
5" to 12" 500-6321
Jewel Clamps Small 850-5115
Large 850-5110
Plate Clamps 1 Ton 851-1469
2 Ton 851-1467
3 Ton 851-1466
Tin Snips — 850-6459
5/8" Rebar Cutter -Bender
— 181-8619
Bolt Cutters 18" 850-6105
30" 850-6108
36" 850-6110
42" 850-6130
Wire Strippers 8-12 Guage 850-6221
10-22 Guage 850-6222
Screw Drivers, Nut Drivers & Hex Keys
Description Sizes Cat Class
Slot Screw Drivers 4"- 12" 850-1904 to 850-1917
Phillips Screw Drivers 3"- 8" 850-1906 to 850-1921
Slot Screw Driver Sets 6 piece 850-1970
Phillips Screw Driver Sets 6 piece 850-1970
Nut Driver Sets — 850-4762
Hex Key Sets — 851-2736
Striking & Struck
Description Sizes Cat. Class
Sledge Hammers Steel and Brass4 to 20 lbs.
850-5520 to 850-5576
Hammers Ball Pein -16 oz. to 32 oz.
850-5408 to 850-5418
Claw - 20 oz. 850-5029
Standard Claw 850-5025
Picks — 850-5740
Pry Bars 12" to 36" 330-6619 to 330-6624
Straight HammerWrenches
15/16" to 4-7/8" 851-2462 to 851-2534
Offset HammerWrenches
15/16" to 4-5/8" 851-2400 to 851-2469
Line Up Pins — 850-9250
Wedges Metal, Brass,Banana
850-4729 to 850-4736
All boxes customized to your specific needs. *Quantities and tools variety
38363_UR 2017_01-53_Tools.indd 29 3/14/17 10:48 AM
30 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Torquing
Hydraulic Air PumpHytorc hydraulic air pump fortorque wrenches.
Model Cat. Class
Hytorcair 850-2840
Electric PoweredHydraulic PumpHytorc 115 hydraulic/electric pump fortorque wrenches.
Model Cat. Class
Hytorc 115 850-2842
Hydraulic TorqueWrench HoseHytorc 090172S torque wrenchhose-15'.
Model Cat. Class
090172S 850-4901
Pneumatic 3/4"Torque WrenchHytorc J-GUN-A1-AP Impact Wrench.Air impact wrench with 3/4" torquecontrol. Torque range ft.-lbs. 320-1285.
Model Cat. Class
JGUN-A1-AP 110-1377
Pneumatic 1"Torque WrenchHytorc J-GUN-3-AP Pneumatic torquewrench. Air Impact wrench with 1"torque control. It provides the speed,safety, and simplicity of an impact gunwithout the vibration and heavy weight.It is the only air torque tool in the worldthat is calibrated for bolt load andtorque and can be operated withoutreaction arms and backup wrenches.Torque range ft.-lbs. 915-3305.
Model Cat. Class
J-GUN-3-AP 110-1378
Pneumatic 1-1/2"Torque WrenchHytorc J-GUN-5-AP Pneumatictorque wrench. Air impact wrenchwith 1-1/2" torque control. It providesthe speed, safety, and simplicity of animpact gun without the vibration andheavy weight. It is the only air torquetool in the world that is calibratedfor bolt load and torque and can beoperated without reaction arms andbackup wrenches. Torque rangeft.-lbs. 1200-5200.
Model Cat. Class
JGUN5 110-1384
Model Torque Range Final Torque H L R RPM Final Torque Weight (With Battery)Ft. Lbs./Nm Inches/cm (No Load) RPM Lbs./Kg. Cat. Class
BTM-1000 200-1200/ 3/4" 12.85"/ 11.44"/ 1.59"/ 40 4 10.6/ 190-5280271-1627 32.6" 29.1 4.0 4.81
BTM-3000 500-3000/ 1" 13.20"/ 13.54"/ 1.75"/ 11 1.1 15.6/ 190-5290678-4067 33.5 34.4 4.4 7.07
36V Battery Powered Torque Gun• Speed Mode: High RPM for quick rundown or removal.• Power Mode: High power for accurate final torque or tough break-out.• Industry Leading Bolt Load Accuracy
FA2I-24MX1E
FA2I-24MX1E
The World’s First... industrial bolting system thatoperates without hoses, cords or reaction arms.The Lithium Series torque guns combined withHYTORC’s patented reaction washer offer theideal solution for portability and conveniencein industrial bolting. Safer, faster and moreaccurate than all comparable systems.
High Speed Rundown, Final Torque and AngleCapabilities The Lithium Series dual speedtorque gun provides the speed and convenienceof a pneumatic torque gun without the noise,vibration and load variation.
The Lithium Series torque guns are precisiontorque/tension bolting systems that can be setto your desired bolt load and locked in to repeatit on each nut. The Lithium Series uses custom-engineered precision planetary gearing to assureaccuracy, repeatability and reliability.
Lightweight, Durable & Powerful
The highest power-to-weight ratio of any batterypowered torque gun. High quality componentsensure superior performance and durability.Its aluminum frame makes it lightweight yetresistant to damage.
38363_UR 2017_01-53_Tools.indd 30 3/14/17 10:48 AM
31Rent now at UnitedRentals.com/equipment
Tools / Torquing
Model Description Cat. Class
2XLCT106 1-3/8" 243-1687 ft./lbs. 850-3122
2XLCT107 1-7/16" 243-1687 ft./lbs. 850-3123
2XLCT110 1-5/8" 243-1687 ft./lbs. 850-3124
2XLCT113 1-13/16" 243-1687 ft./lbs. 850-3125
2XLCT200 2" 243-1687 ft./lbs. 850-3126
2XLCT203 2-3/16" 243-1687 ft./lbs. 850-3127
2XLCT206 2-3/8" 243-1687 ft./lbs. 850-3128
4XLCT113 1-13/16" 580-3855 ft./lbs. 850-3129
4XLCT200 2" 580-3855 ft./lbs. 850-3130
4XLCT203 2-3/16" 580-3855 ft./lbs. 850-3131
4XLCT206 2-3/8" 580-3855 ft./lbs. 850-3132
4XLCT209 2-9/16" 580-3855 ft./lbs. 850-3133
4XLCT212 2-3/4" 580-3855 ft./lbs. 850-3134
4XLCT215 2-15/16" 580-3855 ft./lbs. 850-3135
8XLCT206 2-3/8" 1143-8151 ft./lbs. 850-3136
8XLCT209 2-9/16" 1143-8151 ft./lbs. 850-3137
8XLCT212 2-3/4" 1143-8151 ft./lbs. 850-3138
8XLCT215 2-15/16" 1143-8151 ft./lbs. 850-3139
8XLCT302 3-1/8" 1143-8151 ft./lbs. 850-3140
Hytorc Ratchet Link
Model Description Cat. Class
8XLCT308 3-1/2" 1143-8151 ft./lbs. 850-3141
8XLCT314 3-7/8" 1143-8151 ft./lbs. 850-3142
14XLCT302 3-1/8" 2010-13400 ft./lbs. 850-3143
14XLCT308 3-1/2" 2010-13400 ft./lbs. 850-3144
14XLCT314 3-7/8" 2010-13400 ft./lbs. 850-3145
14XLCT404 4-1/4" 2010-13400 ft./lbs. 850-3146
14XLCT410 4-5/8" 2010-13400 ft./lbs. 850-3147
4XLCT110 1-5/8" 580-3855 ft./lbs. 850-3149
4XLCT213 2-13/16" 580-3855 ft./lbs. 850-3152
18XLCT314 3-7/8" 2676-17845 ft./lbs. 850-3153
30XLCT314 3-7/8" 4770-25910 ft./lbs. 850-3154
4XLCT202 2-1/8" 580-3855 ft./lbs. 850-3155
4XLCT210 2-5/8" 580-3855 ft./lbs. 850-3156
2XLCT209 2-9/16" 243-1687 ft./lbs. 850-3157
2XLCT212 2-3/4" 243-1687 ft./lbs. 850-3158
18XLCT404 4-1/4" 2676-17845 ft./lbs. 850-3159
18XLCT410 4-5/8" 2676-17845 ft./lbs. 850-3160
30XLCT602 6-1/8" 4770-25910 ft./lbs. 850-3162
4XLCT214 2-7/8" 580-3855 ft./lbs. 850-3163
Model Description Cat. Class
HY-2XLCT HYD LC 243-1687 ft./lbs. 850-3100
HY-4XLCT HYD LC 580-3855 ft./lbs. 850-3101
HY-8XLCT HYD LC 1143-8151 ft./lbs. 850-3102
HY-14XLCT HYD LC 2010-13400 ft./lbs. 850-3103
HY-1MXT HYD 3/4" SQ 200-1340 ft./lbs. 850-3104
HY-3MXT HYD 1" SQ 480-3230 ft./lbs. 850-3105
HY-5MXT HYD 1-1/2" SQ 835-5590 ft./lbs. 850-3106
HY-10MXT HYD 1-1/2" SQ 1755-11520 ft./lbs. 850-3107
HY-18XLCT HYD LC 3677-17845 ft./lbs. 850-3108
HY-30XLCT HYD LC 4770-25910 ft./lbs. 850-3109
HY-25XLT HYD 2-1/2" SQ 3960-25890 ft./lbs. 850-3111
HY-50XLT HYD 2-1/2" SQ 7875-52500 ft./lbs. 850-3112
Hytorc Wrenches
Drive Model Manufacturer TorqueRange(ft.-lbs.)
Cat. Class
3/4" .5 G2 Hytorc 75-475 190-5260
1" FG3-110 Hytorc 600-3150 190-5270
Manual Torque Wrenches
Drive Torque Range (ft.-lbs.) Cat. Class
1/4" 40-200 851-0125
3/8" 20-100 851-0120
1/2" 30-150 851-0115
3/4" 120-600 851-0108
1" 100-700 851-0102
1" 200-1000 851-0100
1" 300-2000 851-3111
38363_UR 2017_01-53_Tools.indd 31 3/14/17 10:48 AM
32 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Welding
Miniflex® Portable Welding Fume Extractor (115V) – K3972-1• Portable high welding fume extractor system for light duty applications• Choose 94 CFM (Low) or 135 CFM (High) fume extraction settings• System Airflow Check allows the user to monitor extraction performance• Carbon Brushes Early Warning System alerts the user when 80% of the carbon brushes have been consumed• (H x W x D):28.75" x 16.5" (730 x 420 mm)• Net Weight: 38 lbs. (17 kg)reaction arms and backup wrenches. Torque range ft.-lbs. 915-3305
Cat. Class: 975-1505 EXTRACTOR SMOKE/FUME 50-200 CFM
X-Tractor® 1GC Portable Weld Fume Extraction Unit (230V) – K652-2Lightweight portable high vacuum welding fume extraction system ideal for light duty, intermittentuse in small shop, maintenance or construction.• Great for confined spaces• Easily clean the filter using external compressed air• Requires 230V single phase input power• (H x W x D): 13.4" x 26.8" x 15.8" (340 x 680 x 400 mm)• Net Weight: 37 lbs. (17 kg)
Cat. Class: 975-1505 EXTRACTOR SMOKE/FUME 50-200 CFM
Mobiflex® 200-M Welding Fume Extraction Base Unit – K1653-2• Generous airflow at 735 CFM• Extremely large 538 ft. 2 filter surface area requires fewer filter changes• Internal spark arrestor prevents sparks from reaching the filter• Filter status indicator provides a visual guide to remaining filter life• (H x W x D): 36" x 32" 48" in. (900 x 810 x 1210 mm)• Net Weight: 201 lbs. (91.3 kg) backup wrenches. Torque range ft.-lbs. 1200-5200
Cat. Class: 975 1510 EXTRACTOR SMOKE/FUME 700-1500 CF
XMT 350 WeldersXMT Power SourcesInput Power Requires 3- or 1-phase power
Rated Output• 350A at 34VDC, 60% Duty Cycle, 3- Phase• 300A at 32VDC, 60% Duty Cycle, 1- PhaseWelding Amperage Range• 5 - 425 A, in CC mode• 10 - 38 V, in CV modeNet Weight: 80 lbs. (36.6 kg)
CST CST XMT 350 XMT 350 XMT 450 XMT 450Model CST 280 4-Pack 8-Pack XMT 350 4-Pack 6-Pack XMT 450 4-Pack 6-Pack
Manufacturer Miller Miller Miller Miller Miller Miller Miller Miller Miller
Rated output 280A/ 280A/ 280A/ 350A/ 350A/ 350A/ 450A/ 450A/ 450A/CC/DC 31.2V 31.2V 31.2V 34V 34V 34V 38V 38V 38V
Rated Duty 35% 35% 35% 60% 60% 60% 100% 100% 100%Cycle
Stick (SMAW) Yes Yes Yes Yes Yes Yes Yes Yes Yes
TIG (GTAW) Yes Yes Yes Yes Yes Yes Yes Yes Yes
MIG (GMAW) No Yes Yes Yes Yes Yes Yes Yes Yes
Flux-Cored No Yes Yes Yes Yes Yes Yes Yes Yes(FCAW)
ARC Gouging Yes Yes Yes Yes Yes Yes Yes Yes Yes(CAC-A)
Weight 41 lbs. 355 lbs. 640 lbs. 80 lbs. 599 lbs. 759 lbs. 122 lbs. 780 lbs. 1024 lbs.
Input Power 10.2 kw 40.8 kw 81.6 kw 13.6 kw 54.5 kw 81.6 kw 18.9 kw 75.6 kw 113.40 kwneeded @Rated Output
Cat. Class 975-1271 975-0955 975-0975 975-1358 CC/CV 975-4560 CC/CV 975-4555 CC/CV 975-1450 975-4580 975-4585975-1359 VS 975-4570 VS 975-4565 VS
38363_UR 2017_01-53_Tools.indd 32 3/14/17 10:49 AM
33Rent now at UnitedRentals.com/equipment
Tools / Welding
Spectrum® Series Plasma CuttersOur Spectrum line of plasma cutters provides big cuttingpower in portable packages and with features like flexiblecables and Auto-Re fire technology they are better thanever. Step up to Spectrum 625 X-TREME™ or 875/875Auto-Line™ Models to add Ultra-Quick Connect hand-held torches and machine torch capabilities.
Power factor correction (PFC). Uses less energy byutilizing input power more efficiently and increasesproductivity by reducing nuisance circuit breaker trips.
Model Description Cat. Class
Spectrum 375 Cutter Plasma 3/8" 975 7500
Spectrum 875 Cutter Plasma 7/8" 975 7525
Powermax 125 Cutter Plasma 1" 975 7530
Pulse Mig Gun• Invision 350 MPa• Input Power Requires 3- or 1-Phase Power, 50/60 Hz• Rated Output 10 -38 V, 5-425 A• Weight Net: 80 lbs. (36.3 kg) Ship: 89.1 lbs. (40.4 kg)• Invision 350 Mpa MIG (GMAW)/Pulsed MIG (GMAW-P)• Flux Cored (FCAW)• Air Carbon Arc Cutting and Gouging• (CAC-A) (1/4" carbons max.)• Invision 350 MPa
Model Description Cat. Class
350MPA Pulse MIG Water-cooled Gun 975-4525
Wire Feeder• Maxtrac® Wire Drive System• Dual Range Wire Feed Speed• Trigger Interlock Switch• Replaceable and Flame Resistant Case• Potted PC Boards• Solid Wire Size Range .023-1/16" (0.6-1.6 mm)• Cored Wire Size Range .030-5/64" (0.8-2.0 mm)• Wire Speed Range IPM (m/min) 50-700 ipm
(1.3-17.7 m/min)• Dimensions (H x W x D) 15" x 8.7" x 23.2"
(381 mm x 221 mm x 589 mm)• Net Weight 38 lbs. (17.237 kg)
Model Description Cat. Class
LN-25 PRO Wire Feeder Mig 975-0156
Welding LeadHighly flexible annealed 30 gauge bare copper conductor,insulated with an EPDM jacket and paper separator.Operating temperatures range from -50°C to +105°C(-58°F to +221°F).
Model Description Cat. Class
WC20B050MBFB Welder Lead 50' 975-2205
WC20B100MBFB Welder Lead 100' 975-2210
38363_UR 2017_01-53_Tools.indd 33 3/14/17 10:49 AM
34 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Welding
Propane Welders Bobcat 250 LPRugged welder/generator is great for Stick andFlux-Cored welding and designed for maintenanceand repair operations, construction, farm, ranch andgenerator use.
Cat. Class: 975-1255
Stick WelderProvides maximum portability and performance inmost compact TIG/Stick packages in the industry.Dependability and performance all in one machine.
Model AmperageMax
Voltage Cat. Class
Maxstar 150 150A 120-240V 975-1140
Tig WelderIndustry standard - Miller Electric pioneered theMaxstar-type market, now we've perfected it. TheMaxstar 210 Series provides a solution for a varietyof needs; from simple to fully automated.
Model AmperageRange
Voltage Cat. Class
Maxstar 210 1- 210A 120-480V 975-1200
Stick Welder• Processes: Air Carbon Arc Cutting & Gouging;
Stick; TIG DC• Reliable stick welder for harsh environments
Model AmperageRange
Voltage Cat. Class
Gold Star 652 50 DC-850 DC 220/460/575V 975-1520
38363_UR 2017_01-53_Tools.indd 34 3/14/17 10:49 AM
35Rent now at UnitedRentals.com/equipment
Tools / Welding
Oxygen/Acetylene Carts
Cat. Class: 975-6400
MIG Welders
Model Wire WireRange Range
OutputRange
Voltage Cat. Class
LincolnK2471-1
0.030"-0.035" 30-140A 120V 975-3095
Millermatic140
0.030"-0.035" 30-140A 120V 975-3095
Welding Remote
Cat. Class: 975-2255
Capacity Cat. Class
10 lbs. 975-6727
50 lbs. 975-6725
300 lbs. 975-6723
350 lbs. 975-6724
400 lbs. 975-6728
Welding Rod Ovens
38363_UR 2017_01-53_Tools.indd 35 3/14/17 10:49 AM
36 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Welding
Model Blue Star Bobcat 225 Bobcat 250 Big Blue Trailblazer Big Blue Big BlueNumber 185 AC/DC AC/DC 300R 325 400 Pro 500 Pro
Manufacturer Miller Miller Miller Miller Miller Miller Miller
Rated Output CC/DC 185A/25V 225A/25V 250A/25V 400A/24V 325A/33V 400A/24V 500A/40V
Rated Duty Cycle 20% 100% 100% 100% 100% 100% 40%
Stick (SMAW) Yes Yes Yes Yes Yes Yes Yes
TIG (GTAW) Yes Yes Yes Yes Yes Yes Yes
MIG (GMAW) Yes Yes Yes Yes Yes Yes Yes
Flux-Cored (FCAW) No Yes Yes Yes Yes Yes Yes
ARC Gouging (CAC-A) No Yes Yes Yes Yes Yes Yes
Generator Peak Watts (3ph) N/A N/A 11kw N/A N/A N/A 21kw
Generator Peak Watts (1ph) 6kw 10.5kw 11kw 12kw 12kw 12kw 15kw
Engine Gas Gas LP/Gas/Diesel Diesel Tier 4 Gas/Diesel Diesel Tier 4 Diesel Tier 4
Weight 267 lbs. 530 lbs. 556 lbs. 950 lbs. 620 lbs. 950 lbs. 1800 lbs.
Cat. Class 975-1180 975-1225 975-1250 975-1350 975-1350 975-1405 975-1500
Engine Driven WeldersConstruction jobsites, field fabrication, and maintenance/repair applications demand generator and welding power inlocations where electrical outlets aren’t available. In theseinstances, professionals, farmers/ranchers, and homeownersrely on the output of an engine-driven welding generator.These “two-in-one” machines feature generator power to runtools, lights, appliances, and motors. They also produceStick, TIG, MIG, and flux-cored outputs, so you can tackleevery field welding challenge.
Trail Blazer 325
38363_UR 2017_01-53_Tools.indd 36 3/14/17 10:49 AM
37Rent now at UnitedRentals.com/equipment
Tools / Welding
Engine Driven Welders for AllLincoln Electric’s line of diesel-powered industrial enginedrives are the world’s most respected among pipe welders.Our engine-driven welders provide diverse weldingcapabilities in the field – stick, TIG, MIG, flux-cored andgouging – and generate sufficient AC generator power forthe operation of lights, grinders and other tools, inverterwelders and plasma cutters. If your industrial weldingneeds call for excellent performance in tough, unforgivingenvironments, Lincoln Electric engine-driven welders willdeliver the high-quality welds you’re looking for.
Rent or Buy
Multiquip GLW-180H
Model Ranger® 250 GXT Vantage 300 Vantage® 400 Vantage® 500Number GAW180HE1 K2382-4 K2453-5 DLW400ESA4 K2509-7 K2728-3
Manufacturer Multiquip Lincoln Electric Lincoln Electric Multiquip Lincoln Electric Lincoln Electric
Rated OutputCC/DC 180A/26.8V 250A/25V 300A/32V 200A/2 X 27V 400A/36V 500A/40V
Rated Duty Cycle 50% 100% 100% 100% 100% 100%
Stick (SMAW) Yes Yes Yes Yes Yes Yes
TIG (GTAW) N/A Yes Yes Yes Yes Yes
MIG (GMAW) N/A Yes Yes N/A Yes Yes
Flux-Cored (FCAW) N/A Yes Yes Yes Yes Yes
Arc Cutting (CAC-A) N/A Yes Yes N/A Yes Yes
Generator PeakWatts (3ph) N/A 11,000 12,500 N/A 19,000 22,000
Generator PeakWatts (1ph) 3000 11,000 11,500 14,000 12,000 13,000
Engine Honda Gas Kohler® Gas Kubota® Diesel Kubota® Diesel Kubota® Diesel Kubota® Diesel
Weight 225 lbs. 602 lbs. 1035 lbs. 1050 lbs. 1230 lbs. 1290 lbs.(machine only) (machine only) (machine only)
Cat. Class 975-1180 975-1250 975-1350 975-1399 975-1400 975-1500
Heavy-Duty Welders• Diesel Powered• Trailer Mounted• Stick, TIG, & Gouge
The Lincoln diesel driven 400 amp DC welder has dual continuous output control for boththe current and the voltage. This lets the operator select the right arc characteristics forthe job at hand. It also gives you 11,000W of auxiliary AC power for power tools. Heavygauge steel case gives you durability on the jobsite. This model is a favorite with pipelinersand field welders. We also carry the smaller SA-250 amp welder.
Lincoln 500
Rent or Buy
Blue Star® 185• 185A DC Welding Output
Compact welding and power generator for light industrial,stick welding, and maintenance applications. 6000W ofgenerator power. Two people can easily pick up and carrythis unit using the durable tubular frame. Quick, easy weldamperage setting. Circuit breaker protection for thegenerator and the users’ tools. Unit shuts down for self-protection if oil is low.
38363_UR 2017_01-53_Tools.indd 37 3/14/17 10:49 AM
38 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Pipe Beveling
Model Number Manufacturer Cutting / Beveling Range Pipe Size Estimated Weight Cat. Class
MSAM Mathey Dearman 1.5" to 4" 2", 3", 4" 19 lbs. 975-1020
1SAM Mathey Dearman 3" to 8" 3", 4", 6", 8" 31 lbs. 975-1030
2SAM Mathey Dearman 6" to 12" 6", 8", 12" 42 lbs. 975-1040
3SAM Mathey Dearman 12" to 20" 12", 14", 16", 18", 20" 85 lbs. 975-1043
4SAM Mathey Dearman 20" to 26" 20", 22", 24", 26" 200 lbs. 975-1044
5SAM Mathey Dearman 24" to 30" 24", 26", 28", 30" 210 lbs. 975-1045
6SAM Mathey Dearman 30" to 36" 30", 36" 300 lbs. 975-1046
Mathey Dearman Welding Accessories• Manually Operated Saddle Machine Basic Kits for
Cutting and Beveling Pipes
Includes base machine, torch arm equipped with a fully adjustabletorch carrier assembly for selecting torch angle, operating manual,and complete set of standard mounting legs and pipes. For pipesizes outside of the standard mounting leg sets, please seeAccessory Section XVI for optional leg sets to meet non-standardpipe diameters.
Note: Torch is not included and requires a minimum length of10" with a barrel diameter of 1-3/8" for full range capabilities.
Model Part No. Unit Of Mounting Machine ID A Machine B C D *D * Cat.Measure Min Max Weight Class
NB6 903-1015 Std. - in. 2.375 - 6.625 6.875 11.375 37 lbs. 3 2.25 4.5 500-2706Metric - mm 60.3 - 168.3 174.6 288.9 16.80 kg 76.2 57.2 114.3
NB8 903-1021 Std. - in. 3.5 - 8.625 8.875 13.375 43 lbs. 3 2.25 4.5 500-2708Metric - mm 88.9 - 219.1 225.4 339.7 19.52 kg 76.2 57.2 114.3
NB10 903-1025 Std. - in. 4.5 - 10.75 11.25 15.75 50 lbs. 3 2.25 4.5 500-2710Metric - mm 114.3 - 273.1 285.8 400.1 22.7 kg 76.2 57.2 114.3
NB12 903-1028 Std. - in. 6.625 - 12.75 13.25 17.75 56 lbs. 3 2.25 4.5 500-2712Metric - mm 168.3 -323.9 336.6 450.9 25.42 kg 76.2 57.2 114.3
NB14 903-1303 Std. - in. 8.625 - 14 14.5 19 63 lbs. 3 2.25 4.5 500-2714Metric - mm 219.1 - 355.6 368.3 482.6 28.6 kg 76.2 57.2 114.3
NB16 903-1033 Std. - in. 10.625 - 16 16.5 21 70 lbs. 3 2.25 4.5 500-2716Metric - mm 269.8 - 406.4 419.1 533.4 31.78 kg 76.2 57.2 114.3
NB18 903-1037 Std. - in. 12.75 - 18 18.5 23 75 lbs. 3 2.25 4.5 500-2718Metric - mm 323.9 - 457.2 469.9 584.2 34.05 kg 76.2 57.2 114.3
NB20 903-1038 Std. - in. 14 - 20 20.5 25 83 lbs. 3 2.25 4.5 500-2720Metric - mm 355.6 - 508.0 520.7 635.0 37.68 kg 76.2 57.2 114.3
NB24 903-1039 Std. - in. 18 - 24 24.5 29 98 lbs. 3 2.25 4.5 500-2724Metric - mm 457.2 - 609.6 622.3 736.6 44.49 kg 76.2 57.2 114.3
HydratightThe NB series (Narrow Body) clamshells are designed with a lower profilefor reduced weight and increased functionality in confined work spaces.The series is comprised of 15 standard models covering a range from1.90" (48.3 mm) to 36" (917.4 mm) OD.
The split frame design of the NB clamshell allows for installation of themachine at any point along a pipeline. These portable split frame machinesaccept a wide range of accessories to increase performance and expandcapabilities. Accessories for the Hydratight clamshells include sever slides,axial feed, single point, counterbore and swivel head modules.
NB Clamshell Specs (all models): B = 3" (76.2mm) C = 2.25" (57.2mm) D = 4.5" (114.3mm)* DIMENSION SUBJECT TO CHANGE WITH DIFFERENT TOOLING CONTACT YOUR SALES CONSULTANT FOR SPECIFICS.
38363_UR 2017_01-53_Tools.indd 38 3/14/17 10:49 AM
39Rent now at UnitedRentals.com/equipment
Tools / Air Compressors
Model Number AM1-PH65-08M AM2-PH09-08M
Manufacturer Mi-T-M Corporation Mi-T-M Corporation
Power Honda Gas Honda Gas
Drive Belt Belt
Horsepower/CC 6.5/196 9.0/270
Tank Size 8 gals. 8 gals.
CFM @100 psi 13.1 cfm 18.3 cfm
Pump Speed 1320 rpm 864 rpm
Weight 175 lbs. 260 lbs.
Cat. Class 100-2140 100-2200
Gas Powered Air CompressorsCompressor Pump: Quality cast iron two stage compressorwith venting system for reduced crankcase temperatureand pressure• Stainless-steel braided discharge hose• Splash lubricated cast iron crankcase to extend the hours
of performance• Cast iron head and cylinder for extended durability
AM1-PH65-08M
AM2-PH09-08M
Model Number AM1-HE02-05M AM1-PE15-08M
Manufacturer Mi-T-M Corporation Mi-T-M Corporation
Power 120V/15A 120V/13.2A
Drive Direct Belt
Horsepower/CC 2.0 hp 1.5 hp
Tank Size 5 gals. 8 gals.
CFM @100 psi 4.2 cfm 7.3 cfm
Pump Speed 3400 rpm 675 rpm
Weight 61 lbs. 170 lbs.
Cat. Class 100-2040 100-2065
Heavy Duty Electric PoweredAir CompressorCompressor Pump: Quality single stage compressor• Stainless-steel braided discharge hose• Oil lubricated aluminum crankcase• Aluminum head for heat dissipation• Cast iron cylinder• Inlet air filter
Compressor Pump: Quality cast iron single stagecompressor• Stainless-steel braided discharge hose• Splash lubricated cast iron crankcase to extend the hours
of performance• Cast iron cylinder with aluminum head for durability and
heat dissipation
AM1-HE02-05M
AM1-PE15-08M
38363_UR 2017_01-53_Tools.indd 39 3/14/17 10:49 AM
40 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Air Compressors
Portable Air Compressors• 185 to 1600 cfm range available• Rotary Screw type compressors• Meet US EPA sound requirements of
76 dBA @ 7 meters
As the world’s leading manufacturer of portablecompressors, Proven on job sites around the world,these air compressors offer the highest levels of durability,productivity and serviceability. Doosan Portable Powercompressors are ideal for air powered tool applicationsand feature increased fuel efficiency, reduced noise levels,and best-in-class serviceability and maintainability.
Model Number C185 P425/HP375WCU HP750WCU XP825WCU HP915 HP1600
Manufacturer Doosan Doosan Doosan Doosan Doosan Doosan
CFM 185 425/375 750 825 915 1600
Rated Pressure 100 psi 100/150 psi 150 psi 150 psi 150 psi 150 psi
Pressure Range 80-125 80-125/80-175 80-175 80-150 80-175 80-175
W x L x H 61.7" x 133.7" x 63" 78.1" x 152.6" x 68" 91" x 204" x 89" 91" x 204" x 89" 79" x 215" x 88" 90" x 290" x 100"
Weight 2225 lbs. 4535 lbs. 9500 lbs. 9500 lbs. 9480 lbs. 18,490 lbs.
Fuel Type Diesel Diesel Diesel Diesel Diesel Diesel
Cat. Class 100-3185 100-3275 100-3750 100-3800 100-3910 100-4400
C185P425/HP375WCU
HP750WCU
HP1600
38363_UR 2017_01-53_Tools.indd 40 3/14/17 10:49 AM
41Rent now at UnitedRentals.com/equipment
Tools / Air Compressors
Air CompressorsAtlas Copco is the leading innovator worldwide inthe portable compressor industry.
Atlas Copco Portable Compressors aredesigned for “Sustainable Productivity”. Since itsintroduction, this range of portable, oil injected,rotary screw compressors have built an enviablereputation for performance, reliability, and efficiency.They are also engineered to be environmentallyfriendly. These compressors are very well suitedto many different jobs and applications – fromeveryday use of pneumatic tools in the constructionindustry to highly specialized and heavy dutyenvironments, like drilling offshore in the oil andgas business.
Atlas Copco Portable Compressors offer awide range of capabilities – from the awardwinning design of the “Hard Hat” canopy of theXAS 90/185/400 to the XAS 1800, which has1800 CFM of Full Featured Quality Air – andeverything in between! They have innovativefeatures to make your job easier and aftermarketsupported parts are within easy reach to makeroutine maintenance simple.
Model Number XAS 185 KD FT4 XAS 400 JD XATS 400 JD XAS 750 JD XAS 1800 JD
Manufacturer Atlas Copco Atlas Copco Atlas Copco Atlas Copco Atlas Copco
Rated Pressure 100 psi 100 psi 150 psi 100 psi 100 psi-1600 CFM
Pressure Range 58-125 psi 58-125 psi 58-175 psi 58-125 psi 58-165 psi
W x L x H 64" x 131" x 61" 72" x 161" x 70" 72" x 161" x 70" 78" x 203" x 78" 88" x 235" x 101"
Engine Diesel Diesel Diesel Diesel Diesel
Weight 2330 lbs. (wet) 4470 lbs. (wet) 4470 lbs. (wet) 6405 lbs. (wet) 18,300 lbs. (wet)
Cat. Class 100-3186 100-3350 100-3275 100-3750 100-4396
XAS 185 JD FT4
XATS 400 JD
XAS 1800 JD
38363_UR 2017_01-53_Tools.indd 41 3/14/17 10:49 AM
42 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Sanders & Grinders
Model Number 1274DVSK 3107DVS D26451
Manufacturer Bosch Bosch DeWalt
Sander Type Belt Orbital Orbital
Size 2" x 21" 5" 5"
Motor 120V/6.6A 120V/3.3A 120V/3.0A
Speed (No Load) 550-1100 sfpm 4500-13,000 opm 12,000 opm
Weight 7.1 lbs. 5 lbs. 3.4 lbs.
Cat. Class 190-7225 190-7525 190-7525
Palm Sander
Hand SandersA full-line of heavy-duty DeWalt hand sanders areavailable, including angle sanders, belt sanders,orbital sanders, and palm sanders. Most modelsfeature AC/DC capabilities, allowing you to workoff of most generators and welders.
Belt SandersChoose from a variety of heavy-duty, Bosch handsanders for any job you may have, including beltsanders, orbital sanders, and palm sanders.
Belt Sander
DeWalt D28114N
DeWalt D28474W
Angle Grinders & SandersErgonomically designed Bosch anglegrinders feature a 5/8"-11" spindle thread,which provides flexibility for mountinga variety of popular accessories. A multi-position side handle lets you work in tightspaces and an AC/DC switch extends thetool versatility. United Rentals offers
a full-line of DeWalt angle grinders.Features 3-position, removable sidehandles for working in tight areas.AC/DC capability allows you to workoff of most generators and welders.Spindle l0ck allows for quick and easywheel changes.
Model Number D28114N D28402 1873-6 D28474W 1893-6 1380SLIM 1873-8 1994-6
Manufacturer DeWalt DeWalt Bosch DeWalt Bosch Bosch Bosch Bosch
Size 4.5" 4.5" 7" 7" 9" 4.5" 7" 9"
Amps 13A 10A 15A 15A 15A 7.5A 15A 15A
rpm 11,000 rpm 11,000 rpm 6000 rpm 8000 rpm 6000 rpm 11,000 rpm 8500 rpm 6500 rpm
Spindle Lock Yes Yes Yes Yes Yes Yes Yes Yes
Spindle Thread 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11"
Weight 6.7 lbs. 4.6 lbs. 11.5 lbs. 13.15 lbs. 11.9 lbs. 4.2 lbs. 11.5 lbs. 11.8 lbs.
Cat. Class 190-4075 190-4075 190-4225 190-4225 190-4000 190-4075 190-4225 190-4000
Model Number DAG500D DC411KA
Manufacturer Hilti DeWalt
Size 5" 4.5"
Amps 8.5A Cordless18V
rpm 11,000 rpm 6500 rpm
Spindle Lock Yes Yes
Spindle Thread 5/8"-11" 5/8"-11"
Weight 4.9 lbs. 7 lbs.
Cat. Class 190-4150 190-4615
38363_UR 2017_01-53_Tools.indd 42 3/14/17 10:49 AM
43Rent now at UnitedRentals.com/equipment
Tools / Saws
Cordless Reciprocating Saw• High-powered Milwaukee-built motor to deliver faster
cutting and performance• 28 Volt battery pack delivers two times the run-time as
most 18V products, making this the ideal solution incordless reciprocating saws
• Battery position does not interfere with plunge cuttingcapabilities
• This Sawzall® saw has a 1-1/8" stroke length thatdelivers fast cutting speeds
Dewalt DC385K Cordless Sawzall Reciprocating Saw
Cat. Class: 625-8501
Electric Portable Band Saws• Cuts up to 3-3/4" in rectangular and round stock• Maintains a steady, optimum blade speed• Features all ball and roller bearing construction; worm
gear and chain drive mechanism
Dewalt DWM120K Electric Portable Band SawCat. Class: 625-0008
Cordless Band SawCat. Class: 625-1225
Electric Reciprocating Saw• 10 Amp motor provides the power to cut through heavy-
duty materials• 0 - 2800 spm variable speed delivers fast cuts• 1-1/8 in. stroke length provides efficient cutting• Variable-speed trigger provides optimal control• 4-position blade clAmp helps you make flush cuts• Blade clAmp features a lever action for easy operation• Keyless blade change for fast changes• 8' cord provides a long reach
Dewalt DW304PK Sawzall Electric Reciprocating Saw
Cat. Class: 625-8500
14" Abrasive Cutoff Machine• 15A motor/4300 rpm• AC/DC capability – extends the versatility of the tool by
working from DC outlets such as welders and generators
Cat. Class: 625-7800
12" Cut-Off Machine• 15A motor, 5000 rpm• 3-7/8" cut depth• Natural debris removal• Reversible handle
Cat. Class: 625-7700
Pneumatic Band Saw• Cuts 4" wide x 4" deep• Weight 6 lbs.• Aluminum housing• Low Vibration
CS Unitec 5 6003 Air Portaband Saw
Cat. Class: 625-0029
38363_UR 2017_01-56_Tools.indd 43 4/12/17 9:52 AM
44 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Saws
Jig Saw• 120V/7A AC• Toolless blade-change system
– fast insertion, blade ejection levereliminates need to touch hot blade
Cat. Class: 625-6000
10" Tile SawA robust tile saw with a refined cart and rail system forperfectly straight cuts. The TS 60 is equipped with apatented water and slurry system for little to no mess.This includes an efficient recycling system that cleanswater for reuse.
Cat. Class: 625-8300
7-1/4" Worm Drive Saw• Powerful 15A motor• 20A switch and heavy gauge cord• Push button spindle lock for easy blade changes
Cat. Class: 625-5200
7-1/4" Circular Saw• 15.0A motor/5600 rpm• 56˚ bevel capacity with positive
detents at 22.5˚ and 45˚• Includes: jobsite tool bag, 24-tooth
carbide blade, and blade wrench
Cat. Class: 625-5380
14" AbrasiveCutoff Machine• 4 HP, 15A motor• Intergrated carry handle• Quick release locking vise; 0°-45° for
angle cuts• Spindle lock; fast wheel changes
Cat. Class: 625-1900
38363_UR 2017_01-56_Tools.indd 44 4/12/17 9:52 AM
45Rent now at UnitedRentals.com/equipment
Tools / Lighting
Woodhead ExplosionProof Lighting• Rated Class 1 - Dividsion 1,
Grp C,D and Class 2 Grp EFG• Handlamp comes standard with
a 27 watt,120v Fluorscent lamp• 50' lamp cord with standard
5-15P Nema Plug
This Product is considered aTask Light. Illuminates a 10'circumference around operator.OSHA requires that this productbe protected by a GFI circuit.
FluorscentCat. Class: 320-2135
LEDCat. Class: 320-3020
Halogen Lights• 4 Headed / 110V• Weather-resistant• Adjustable from 7" to 10"• 4.17 amps/fixture• Steel quadpod stand
Cat. Class: 320-1070
Halogen Lights• 2 Headed / 110V• Weather-resistant• Adjustable from 7" to 10"• 4.17 amps/fixture• Steel quadpod stand
Cat. Class: 320-2160
1000 Watt Halogen Lights
Capacity Cat. Class
2 Head 320-1200
1 Head 320-2100
Magnetic Lights
Cat. Class: 320-1065
Vapor Proof Drop Lights• 110V - 50’ Cords
Cat. Class: 320-5245
2' & 4' FluorescentLights• 110V - 50' cords
Cat. Class: 320-3058
Explosion Proof String Lights
Capacity Cat. Class
5 Head 320-3030
8 Head 320-3035
Mechanical Drop Lights• 110V - 50' cords
Cat. Class: 320-1060
String Lights• 110V - Metal Guard
Cat. Class: 320-2395
String Lights• 110V - Plastic Guard
Cat. Class: 320-2395
LED String Lights• 110V - 50’ Cords
Cat. Class: 320-2395
38363_UR 2017_01-56_Tools.indd 45 3/15/17 8:27 AM
46 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Drills
3/4" Electric Drill• AC/DC switch• Full power forward
and reverse• 10A motor, 375 rpm• Triple gear reduction
Cat. Class: 190-3450
VSR Screwdriver• Set-and-forget depth
sensitive nosepiece• 6.3A motor, 4000 rpm• #8 max. fastener size• Torque 81 in.-lbs.
Cat. Class: 190-8150
Nibblers• Cuts various materials• 10-Gauge to 20-Gauge capacities
Cat. Class: 190-5475Cat. Class: 190-5450
3/8" VSR Drill• 7.5A motor; 0-2100 rpm• Variable speed, reversing
switch – Completecontrol for drilling, drivingand removing bits orscrews
Cat. Class: 190-3250
1/2" VSR Drill• 8.0A motor; 0-850 rpm• One-handed keyless
chuck – for quick andeasy bit changes
• Magnesium fronthousing – forincreased durability
Cat. Class: 190-3300
18V 1/2"Cordless Drill• 650 in.-lbs. torque• 0-1800 rpm• 1/2" metal chuck
Cat. Class: 190-3100
3/8" Right AngleDrill• 3.8A motor; 0-1100 rpm• Variable speed dial –
for matching speed tothe application
• Paddle-type switchprovides extra controlwhen turning tooloff and on
Cat. Class: 190-3200
1/2" ImpactWrench• 345 ft.-lbs. of torque
in forward or reverse• AC/DC, forward/reverse
rocker switch• Detent pin secures socket• 7.5A motor
Cat. Class: 190-5075
3/4" Impact Wrench• 10.5A motor, 1260 rpm• 1900 bpm (no load)• 450 lbs. torque• 7/8" large bolt capacity
Cat. Class: 190-5150
Shears• Visible blade allows precise
pattern cutting• Cutting capacities range from
8-Gauge to 20-Gauge
Cat. Class: 190-8450Cat. Class: 190-8350
1/2" Stud &Joist Drill• Low gear mechanical
slip clutch• Adjustable front and
2-position side handles• 11.5A motor, 1200 rpm• Triple gear reduction
Cat. Class: 190-3350
38363_UR 2017_01-53_Tools.indd 46 3/14/17 10:49 AM
47Rent now at UnitedRentals.com/equipment
Tools / Drills
Size Cat. Class
1 HP 190-8810
2 HP 190-8820
3 HP 190-8830
Concrete Vibrators
Manufacturer Model Speed Cat. Class
DeWalt DW758 3.6K 190-4380
Table Grinder
Manufacturer Model Speed Cat. Class
DeWalt DW888 14.4 – 21K 190-4601
DeWalt DWE4887N 22 – 27K 190-4605
Die Grinder
Manufacturer Model Cat. Class
Bosch 1245EVS 190-6525
Rotary Hammer• X-Large SDS MAX Electric
Manufacturer Type Model Size Cat. Class
DeWalt Cordless Impact DC823KA 3/8" 190-2340
DeWalt Cordless Impact DC825KA 1/4" 850-2341
DeWalt Cordless Drill DCD740C1 3/8" 190-3050
DeWalt Cordless Impact DC821KA 1/2" 190-2342
Makita Electric Impact TW1000 1" 190-5225
190-2342 190-5225190-3050850-2341190-2340
Cordless Impacts
38363_UR 2017_01-56_Tools.indd 47 4/12/17 12:47 PM
48 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Core Drills
Husqvarna DMS280
Husqvarna DMS230 Husqvarna DMS280
Norton Clipper HDR600C
Norton Clipper DR520
Model HDR600C DM230 DMS240 DR520 DMS280
Manufacturer Norton Clipper Husqvarna Husqvarna Norton Clipper Husqvarna
Max. Hole Size 4" 4" 10" 10" 16"
Motor Cardi Husqvarna Husqvarna Milwaukee Husqvarna
RPM 940 500-1400-2900 1400-2900 rpm 450/900 300-660-1140 rpm
Volt 115V 115V 115V 115V 115V
Amp 15A 15A 20A 20A 20A
Weight 12 lbs. 12 lbs. 51 lbs. 125 lbs. 86 lbs.
Cat. Class 181-7320 181-7320 180-7000 180-7000 180-7000
Core Drills• Drill 1/2" to 16" Holes in Concrete
United Rentals has both hand-held and rig-mounted coredrills. With models weighing as little as 14 lbs., thesemachines are easy to place and use. Picked for their sturdyconstruction, these machines are just what you need to drillopenings for plumbing, electrical wiring, mechanical, HVACducts, and vents.
Rent or Buy
38363_UR 2017_01-53_Tools.indd 48 3/14/17 10:49 AM
49Rent now at UnitedRentals.com/equipment
Tools / Magnetic Drills
Model Drill Press 1/2" Magnetic Drill Press 3/4" Magnetic
Max. cutter diameter 1-1/2" 38 mm 2-3/8" 60mm
Max. cutter drilling depth 2" 50 mm 3" 75 mm
Power consumption W1050 W1400
Power output W530 W770
No load speed 450 rpm First gear 330 rpm Second gear 340 rpm
Load speed 330 rpm First gear 180 rpm Second gear 340 rpm
Cutter holder 3/4" Weldon shank 3/4" Weldon shank
Stroke 2-1/2" 65 mm 3-5/8" 92 mm
Magnetic holding force 2023 lbs. 9000 N 2473 lbs. 11,000 N
Magnetic foot dimensions 3" x 6-1/4" 76 x 159 mm 7"-1/2 x 4" 191 x 102 mm
Height (min - max) 15.08" - 17.64" 383 mm - 448 mm 20" - 23.62" 508 - 600 mm
Width 7.87" 200 mm 7.51" 191 mm
Length 9.25" 235 mm 11.38" 289 mm
Cable with plug 13' 3.8 m 13' 3.8 m
Weight according to EPTA 32 lbs. 14.4 kg 53 lbs. 23.9 kg
Cat. Class 190-3500 190-3550
JHM USA 101 Magnetic Base Drills upto 1-1/2" / 2-3/8" (38/60 mm)For dimensionally accurate drilling on the construction site• Uniform-torque motor for demanding core drilling• High concentricity and reliable core ejection due to special
bore spindle guides• Solid, massive construction in die-cast aluminum for work
under difficult conditions• Integrated cooling tank.• Internal motor cable routing• Accessory handle for easy carrying of tool• Hand feed wheel can be mounted on either side
JHM USA 5-Magnetic Base Drills upto 1-1/2" / 2-3/8" (38/60 mm)With 2-speed gearbox for drilling in the workshopto depths up to 75 mm.• Uniform-torque motor for demanding core drilling• High concentricity and reliable core ejection due
to special bore spindle guides• Solid, massive construction in die-cast aluminum
for work under difficult conditions• Integrated cooling tank• Internal motor cable routing• Accessory handles for easy carrying of tool• Hand feed wheel can be mounted on either side• Mechanical 2-speed gearbox• Extra-long drill shaft. for drilling depths up
to 3" (75 mm)
38363_UR 2017_01-53_Tools.indd 49 3/14/17 10:49 AM
50 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Magnetic Drills
Model Drill Press 1-1/4" Magnetic
Core bit max. dia. 1-1/16"
Core drill, max. drilling depth 2"
Twist drill max. dia. 7/8"
Tapping max. 1/2"
Max. countersinking dia. 2"
Cat. Class 190-3600
JCM 200U Carbide Magnetic Drill, 120VUniversal core drill unit for flexible working on site.• Mechanical two-speed gearbox with continuously variable
electronic speed reduction, for optimum cutting speedwhen drilling, tapping, reaming and countersinking
• Flexible accessories use and accuracy with a combinationof Quick IN and MT 3 adapters
• Adjustable double dovetail guide enables use of longdrilling accessories without removing the machine fromthe work piece
• Compact design and ideal power-to-weight ratio• Reversible• High torque, FEIN high-performance motor• Speed-controlled tacho electronics• Powerful magnet• Magnet monitor system• “Memory function” speed storage• Integrated gravity-fed cooling lubricant supply• Easy to use single-handed• Electronic overload protection• Self-start lock
Model Drill Press 1-1/2" Magnetic
Max. cutter diameter 4" 100 mm
Max. cutter drilling depth 3" 75 mm
Power output W1400
Motor V/A 120 11.7
Low speed (no load/load) 150/100 rpm
Mid Load speed 220/150 rpm
Mid high speed 290/200 rpm
High speed (no load/load) 450/310 rpm
Stroke 8-7/16" 215 mm
Spindle CL to magnet face 2-9/16" 65 mm
Arbor size 3/4" Weldon shank
Magnetic holding force 4833 lbs. 2192 kg
Weight 73 lbs. 33 kg
Magnetic foot dimensions 4-3/4" x 9-1/2" 121 x 242 mm
Height 31-3/8" 797 mm
Width 9-1/2" 242 mm
Length (w/handle) 16" 305 mm
Cat. Class 190-3610
Slugger JHM 4" x 4"The Slugger JHM 4 x 4 is a powerhouse drilling systemcapable of mag base drilling up to 4 inch (100 mm) Ø holes,3 inches (75 mm) deep.• 4 speed gear box for powering through large and
small holes• Versatile, MT 3 capable, uses 3/4" shank cutters• Smart Magnet TM circuitry for safe drilling on
marginal surfaces• Chip guard• Gravity-fed, external coolant• Easy to use control panel• Concealed motor wiring• Center pin coolant feed• Dovetail feed guides
38363_UR 2017_01-53_Tools.indd 50 3/14/17 10:49 AM
51Rent now at UnitedRentals.com/equipment
EH11 Spline Rotary/Demo HammerHigh impact tool for breaking concrete, brick, asphalt, stone,terrazzo, and frozen or hard ground. Can also be used fordrilling, cleaning and finishing masonry, and concrete surfaces.Lightweight 42 lbs. Requires 110V/10A.
Cat. Class: 190-6450
Bosch 11255VSR
1" SDS-Plus® Bulldog Xtreme RotaryHammer7.2 amp, 0-1300 rpm, 0-5800 bpm. 3 modes of operation:rotation only, rotary hammer, and hammer-only mode. Integralclutch helps minimize torque reaction.
Cat. Class: 190-6375
1-9/16" Spline Combination Hammer10 amp; 400 rpm; 3000 bpm. Impact energy: 5.2 ft.-lbs.Spline/round hex bit system — tool-free bit changes, withautomatic bit locking.
Cat. Class: 190-6450
Bosch 11247
1-3/4" SDS-max® Combination Hammer13.5 amp motor, 145-280 rpm; 1350-2800 bpm. Impactenergy: 9.6 ft.-lbs.; turbo mode: 11.1 ft.-lbs. “Combination”Dual Mode Selector – 2 modes of operation, rotary hammerand hammer only mode.
Cat. Class: 190-6375
Bosch 11263EVS
Bosch 11224VSR
7/8" SDS-Plus® Bulldog Rotary HammerSDS shank, 7/8" spiral, 1/2" steel, 1" wood, 2-1/2" core.0-6150 bpm with no load, 0-1100 rpm. Operating weightis 6.5 lbs.
Cat. Class: 190-6225
1/2" Hammer Drill8.5 amp motor. Patented rotating brush plate – provides equalpower in reverse to easily back out bound-up bits and doublesbrush life.
Cat. Class: 190-6150
Bosch HD19-2
1-1/8" Breaker Hammer Kit15 Amp 1300 BPM. Impact force of 34 ft.-lbs. (45J) andpowerful 1750 W motor.
Cat. Class: 190-2110
Bosch 11335K
SDS-max® Demolition HammerVariable-speed dial for controlled chipping applications.Tool-free changes with automatic bit locking, dust protection,and maximum impact energy transfer rate. Requires120V/14A electrical service.
Cat. Class: 190-2000
Bosch 11316EVS
1-9/16" SDS-max® Combination Hammer10 amp; 400 rpm; 3000 bpm. Impact energy: 5.2 ft.-lbs.“Combination” dual mode selector – 2 modes of operation,rotary hammer and hammer only mode.
Cat. Class: 190-6375
Bosch 11240
1-1/8" SDS-plus® Rotary Hammer8.0 amp. Impact energy: 2.6 ft.-lbs. 360° auxiliaryhandle. Integral clutch.
Cat. Class: 190-6300
Bosch RH328VC
Tools / Rotary Hammers
38363_UR 2017_01-53_Tools.indd 51 3/14/17 10:49 AM
52 Call for current rates: 800.UR.RENTS (800-877-3687)
Tools / Rock Splitters and Breakers
TE 60 Combihammer• Ideal for mechanical applications such as through drilling
• Strong 1200 W motor delivers impressive power forfast drilling
• Optimized drive system for consistent torque
• Robust components and efficient cooling providesuperior durability
Cat. Class 190-6375
TE 60-ATC-AVRCombihammer• Ideal for mechanical applications
such as through drilling• Strong 1200 W motor delivers impressive
power forfast drilling• Optimized drive system for consistent torque• Robust components and efficient cooling provide
superior durability• Innovative Active Vibration Reduction (AVR) helps
improve worker comfort and productivity• Active Torque Control (ATC) provides additional
operator protectionTE 1000-AVR Breaker• For use in medium demolition, concrete removal, concrete
bushing, tamping, digging, through penetrations in concreteand heavy floor tile removal
• Sub-chassis Active Vibration Reduction achieves the lowestvibration in its class
• Power reduction switch offers 30% less impact forprecision work
• DRS-B Dust Removal System collects up to 95% ofhazardous fine dust
• New brushless SR motor eliminates need to replace carbonbrushes — provides longer intervals between service andtwice the expected tool life
Cat. Class 190-2030
TE 3000 AVR Breaker• Over 50 foot-pounds of impact
energy results in outstandingdemolition performance and productivity
• Active Vibration Reduction achievesthe lowest vibration in its class
• TE-H Polygon Self-Sharpening Chiselsprovide strong breaking power andstick less in concrete
• New brushless SR motor eliminates needto replace carbon brushes and provideslonger intervals between service
• Power Conditioning System helps protectthe motor against power surges and drains
Cat. Class 190-2300
Bosch BH2760VCwith cart
Bosch BH2770VCDwith cart
Breakers• Electric or Gasoline Powered• No Air Compressor Required
Designed for breaking concrete slabs, floors, walls,sidewalks, stones, brickwork, frozen ground, heavy clayand asphalt. These Breakers do not need a compressor.Vibration dampened for easy operation. Direct impact onthe tool creates high breaking performance. Quick changetool holder accepts standard 1-1/8" hex x 6" shank.
Manufacturer WackerNeuson Bosch DeWalt Wacker
Neuson
Model EH27 BH2760 D25980 BH65
Power Electric Electric Electric Gasoline
Est ImpactEnergy
37 ft./lbs. 35 ft./lbs. 38.35 ft./lbs.47.9 ft./lbs.
Amps 15A 15A 15A N/A
Tool Weight 59.5 lbs. 63.2 lbs. 68.3 lbs. 57.3 lbs.
Cat. Class 190-2200 190-2200 190-2200 180-6960
D25980 BH65
38363_UR 2017_01-53_Tools.indd 52 3/14/17 10:49 AM
53Rent now at UnitedRentals.com/equipment
Tools / Gantry Crane
EME Aluminum Gantry CranesEME aluminum, portable, Gantry Cranes may be moved safely while under Full-rated Load. EME offers a capacity range ofone-half ton to five-ton Gantry Cranes. The Hollow Beam design is light-weight, and available in lengths up to 30 feet. Highlift to weight ratio – up to 26:1 lift-to-weight, much higher than steel gantries.• It only takes two people to build a standard gantry crane• High tech, ALL-aluminum-alloy construction (Legs, Beam,
Beam Trolley)• Portability: Easily transported between job sites in a
standard-sized pickup truck, and easily made compactfor storage
• Locking 'Surround-Beam' Trolley rides on top of the Beamand cannot derail — which enhances Operator safety
• Hollow Beam allows for 'ground-up assembly' – StandardGantry Cranes built easily by two people
• Casters that lock independently (for swivel and roll), forGantry to be steered and rolled under Load
• Easy-grip, Operator-friendly Handles forHeight Adjustment
• Aluminum Billet Handles on Beam for easy carrying.• Grade L9 Plated Fasteners
Model Cap Beam Min. Hight Max. Height LegNumber (lbs.) Length (ft.) To Lift Ring (in.) To Lift Ring (in.) Span (in.) Weight (lbs.) Cat. Class
4400M 4400 6'-15' 66" 90" 48" 240 330-9680
6600R 6600 6'-15' 106" 154" 70" 575 330-9650
11000R 11,000 6'-15.5' 106" 154" 70" 725 330-9635
38363_UR 2017_01-53_Tools.indd 53 3/14/17 10:49 AM
54 Call for current rates: 800.UR.RENTS (800-877-3687)
NOTES
38363_UR 2017_01-56_Tools.indd 54 3/14/17 11:10 AM
55Rent now at UnitedRentals.com/equipment
NOTES
38363_UR 2017_01-56_Tools.indd 55 3/14/17 11:10 AM
56 Call for current rates: 800.UR.RENTS (800-877-3687)
NOTES
38363_UR 2017_01-56_Tools.indd 56 3/14/17 11:10 AM
38363_UR 2017_00_IFC-IBC.indd 1 4/5/17 1:55 PM
38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM