Transcript
Page 1: under water welding-s.saravanakumar,ice,srptc

Sri Ramakrishna Polytechnic College

INSTRUMENTATION AND CONTROL ENGINEERING

Page 2: under water welding-s.saravanakumar,ice,srptc

PREPARED

S.SARAVANA KUMAR

Page 3: under water welding-s.saravanakumar,ice,srptc

UNDER WATER WELDIND

Page 4: under water welding-s.saravanakumar,ice,srptc
Page 5: under water welding-s.saravanakumar,ice,srptc

SAFETY MEASURES

Page 6: under water welding-s.saravanakumar,ice,srptc

INTRODUCTION

•Underwater welding is an important tool for under fabrication work.

•In 1946,special water proof electrodes were developed in HOLLAND by EVANDER WILLINGEN.

Page 7: under water welding-s.saravanakumar,ice,srptc

CLASSIFICATION

Under water welding can be classified as :

Wet welding

Dry welding

Page 8: under water welding-s.saravanakumar,ice,srptc

WET WELDING

•This technology for repairing marine structure.

•welding is performed under water directly exposed to the wet environment.

•MMA (manual metal arc) welding is commonly used process in repair of offshore platform.

Page 9: under water welding-s.saravanakumar,ice,srptc

Principle of operation

•The work is connected to the positive side of dc source and electrode to the negative.

electrode

•The two parts of the circuit are brought together and then slightly separated.

•An electric current occurs in gap and causes a sustainable spark which melts the bare metal to provide a shielding gas.

•Arc burns in the cavity formed inside the flux covering , which designed to burn slower than the metal barrel to the electrode.

Page 10: under water welding-s.saravanakumar,ice,srptc

advantage

•Less costlier than dry welding.

•The versatility and low cost.

Disadvantage

•Hydrogen embritt lement causes cracks.

•poor visibility due to water contaminance.

Page 11: under water welding-s.saravanakumar,ice,srptc

DRY WELDING•A chamber is created near the area to be the welded.

•The welder does the job by staying inside the chamber.

•Gas metal arc welding is the best process for this welding.

Page 12: under water welding-s.saravanakumar,ice,srptc

SCOPE OF FURTHER DEVELOPED

•HYPER BARIC WELDING IS WELL ESTABLISHED AND GENERALLY WELL RESEARCHED.

•Research being carried out for welding at a range of 500 to 1000m deep.

•THOR-1 is developed performs pipe fitting, installs the track and orbital head on pipe and rest process is automated.

Page 13: under water welding-s.saravanakumar,ice,srptc

APPLICATION

•Offshore construction for taping sea resources.

•Repair and maintenance of ship.

•Construction of large ship beyond the capacity of existing docks.

Page 14: under water welding-s.saravanakumar,ice,srptc

conclusion

Alternative which include clamped and grouted repairs and the use of bolted flanges for the tie-ins not necessarily and are not always satisfactory.

Page 15: under water welding-s.saravanakumar,ice,srptc

Top Related