P a g e 2 3 23
Inch
Thre
ad F
orm
Inte
rnal
Thr
eadi
ng T
ool
Internal Threading Tool (All Inserts Are HSN Coated) Insert Part
NumberHolder Part
NumberHolder
Description D1 L2 L1 D2Maximum
Thread Depth
Nominal Size UN Pitch
175-3002 190-1302 OTE-0250-6.0-.1875 0.1875 6.0 na 0.1875 4 7/16 14
↓ 190-1322 CBCYV-0250-6.0-0250 .216 6.0 1.05 .2500 ↓ 7/16 20
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1/2 13
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1/2 20
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 9/16 12
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 9/16 18
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 5/8 11
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 5/8 18
175-3003 190-1313 CYF-0500-6.0-0500 0.44 6.0 1.75 0.5 1.6 3/4 10
↓ 190-1323 CBCYF-0500-6.0-0500 0.44 6.0 1.145 0.5 1 3/4 16
↓ 190-1303 OTE-0500-6.0-.4375 0.4375 6.0 na 0.4375 4 7/8 9
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 7/8 14
175-3004 190-1314 CYF-0625-6.25-0625 0.55 6.25 2 0.625 1.85 1 8
↓ 190-1324 CBCYF-0625-6.0-0625 0.55 6.0 1.325 0.625 1.2 1 12
↓ 190-1304 OTE-0625-6.0-5625 0.5625 6.0 na 0.5625 4 1 14
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/8 7
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/8 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/8 12
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/4 7
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/4 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/4 12
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-3/8 6
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-3/8 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-3/8 12
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/2 6
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/2 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-1/2 12
UN Thread Form
D1
L1L2
D2
1.436.125
.170
60˚
.3156.040
.058
60˚
.5815.045
.070
60˚
.791.070
.105
60˚
1-5/8” - 4”Internal
Threading Tool
3/4” - 7/8” UN Thread Form
Internal Threading Tool
1” - 1-1/2”UN Thread Form
Internal Threading Tool
7/16” - 5/8”UN Thread Form
Insert
P a g e 2 424
Internal Threading Tool (All Inserts Are HSN Coated)
Insert Part Number
Holder Part Number
Holder Description D1 L2 L1 D2
Maximum Thread Depth
Nominal Size UN Pitch
175-3005 190-1315 CYF-1250-7.5-1250 1.125 7.5 2.25 1.25 2 1-5/8 8
↓ 190-1325 CYF-1250-10.0-1250 1.125 10.0 3 1.25 2.75 1-3/4 5
↓ 190-1305 OTM-1.250-8.0-1000 1 8.0 na 1 6 1-3/4 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1-7/8 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 2 4.5
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 2 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 2-1/4 4.5
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 2-1/4 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 2-1/2 4
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 2-1/2 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 2-3/4 4
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 2-3/4 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 3 4
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 3 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 3-1/4 4
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 3-1/4 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 3-1/2 4
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 3-1/2 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 3-3/4 4
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 3-3/4 8
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 4 4
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 4 8
Inch
Thre
ad F
orm
Inte
rnal
Thr
eadi
ng T
ool
UN Thread Form - Continued
D1
L1
D2
L2
38
l ooT g nidae rhT la nretn I mroF daerh T cirt e
M
Internal Threading ToolInsert Part
NumberHolder Part
NumberHolder
Description D2 L1 L2 D1Maximum
Thread Depth
Nominal Size ISO Pitch
175-1030 190-2092 OTM-06-150-12 5 46 150 12 45 12 1,75
↓ ↓ ↓ ↓ ↓ 150 ↓ ↓ 16 2
↓ ↓ ↓ ↓ ↓ 150 ↓ ↓ 18 2,5
175-1003 190-1113 CYF-12-150-12 10,8 46 150 12 44 20 2,5
↓ 190-1123 CBCYF-12-150-12 10,8 52 150 12 50 22 2,5
↓ 190-1103 OTM-12-150-11 11 na 150 11 100 24 3
↓ ↓ ↓ ↓ ↓ 150 ↓ ↓ 27 3
175-1004 190-1114 CYF-16-160-16 14,4 50 160 16 48 30 3,5
↓ 190-1124 CBCYF-16-150-16 14,4 52 150 16 50 33 3,5
↓ 190-1104 OTM-16-150-14 14 na 150 14 100 36 4
↓ ↓ ↓ ↓ ↓ 150 ↓ ↓ 39 4
↓ ↓ ↓ ↓ ↓ 150 ↓ ↓ 42 4,5
↓ ↓ ↓ ↓ ↓ 150 ↓ ↓ 45 4,5
175-1005 190-1115 CYF-30/32-250-32 28,6 76 250 32 72 48 5
↓ 190-1105 OTM-30/32-200-23 25 na 200 25 150 52 5
↓ ↓ ↓ ↓ ↓ 200 ↓ ↓ 56 5,5
↓ ↓ ↓ ↓ ↓ 200 ↓ ↓ 60 5,5
↓ ↓ ↓ ↓ ↓ 200 ↓ ↓ 64 6
↓ ↓ ↓ ↓ ↓ 200 ↓ ↓ 68 6
ISO Thread Form
D1
L1
D2
L2
36.47mm3.175mm
4.32mm
60˚
8.02mm1.02mm
1.47mm
60˚
14.77mm1.14mm
1.78mm
60˚
20.09mm1.78mm
2.67mm
60˚
ISO Thread Form Internal
Threading Tool
M20-M27ISO Thread Form
InternalThreading Tool
M30-M45ISO Thread Form
InternalThreading Tool
M12-M18ISO Thread Form
Insert
EXCLUSION OF OTHER WARRANTIES AND REMEDIESThere are no warranties, express or implied, which extend beyond the warranty description on the face hereof and specifically, OMNITHREAD AND
ITS AFFILIATED COMPANIES EXCLUDE ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. Omnithread and it’s affiliated companies shall have no liability or responsibility for any claim or loss arising out of the design, manufacture, sale or use of its product other than to repair or replace its products as described above or alternatively, at Omnithread’s sole option, to credit all or part of the purchase price for
returned products as described above. IN NO EVENT SHALL OMNITHREAD OR ITS AFFILIATED COMPANIES BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Any misuse or alteration of the product may void this warranty.
Omnithread does not authorize any person or entity to make any representation (verbal or written) contrary to the terms of this Limited Warranty or its exclusions.
4930 S. Lapeer Rd. • Orion Twp., MI 48359Phone: (586) 574-0952 • Fax: (586) 558-9481www.omnithread.com
LIMITED WARRANTYOmnithread Warrants to all distributors and industrial users that the products supplied by Omnithread shall be free from defects in
material and workmanship.
For a period of thirty days from the date of sale by Omnithread, we will repair or replace (at no additional charge) any standard Omnithread product which Omnithread determines contains defects in material or workmanship or alternatively, at its sole discretion, Omnithread may credit all or part of the purchase price for such product. However, complete operating conditions and any other information requested by Omnithread must accompany claims made under
this Warranty. We cannot issue credit or accept returns on specials.