LED Warehouse LightingThe direct LED replacement for HID
UFO / HiCloudLED High Bay Lights
NEW
5 YearWarranty
GreenLong Lifehrs
50000Power Saving
70%70%IP65
LED DRIVER
2
IP SealApproved IP65 seal.
92% TransmittanceStrong tempered glass and scratch resistant.
Everything you need to knowWhat's inside?
Meanwell DriverA true 50,000 hour lifespan provided from using the world'sleading power supply from Meanwell.
PHILIPS LUMILEDS LUMILEDS SMD33030LED chips are one of the most advanced LEDs in the world that combine high efficacy and high quality.
HeatsinkHigh quality aluminium heat sink that provides efficient heat dissipation.
StainlessAll stainless steel screws that are anti corrosive.
Thermal
management61.4660.5659.6558.7457.8456.9356.0355.1254.2253.3152.4151.5050.5949.6948.78
13°C
74.10
70.58
67.05
63.53
60.00
56.48
52.96
49.43
45.91
42.38
32°C
ENELTEC UFO LED High Bay Lights
ENELTEC UFO LED High Bay Lights uses SMD technology that has equally spaced LED chips to provide even heat dissipation for a superior thermal management. Heat management is vital for the life of LEDs.
Conventional LED High Bay Lights
Unlike ENELTEC UFO LED High Bay Lights, most conventional LED High Bays use COB technology. COB is made up of lots of chips spaced closely together, which means that heat dissipation is very limited and causes the LED chips to suffer under higher temperatures.
Dialux Simulation Comparison
UFO LED Replace HID
Room Width:100m Room Length:100m Room Height:10m Fixture Qty: 255pcs Fixture Spacing:6.7m
UFO 150W Normal LED 150W
Working Plane 312lux 199lux
Uniformity 0.474 0.394
3D Rendering
400W HPS 120W UFO
Dimension
Φ
H
H1
H2
H3
Φ H1 H2 H3 H100W 280 36 64 65 165120W 320 36 64 79 179150W 320 36 64 79 179200W 400 52 70 86 208240W 400 52 70 86 208
Model Dimension (mm)
Data
Model No. ENHB-100W-05(CE/MW)
ENHB-120W-05(CE/MW)
ENHB-150W-05(CE/MW)
ENHB-200W-04(CE/MW)
ENHB-240W-04(CE/MW)
InputVoltage 85-265VAC 85-265VAC 85-265VAC 85-265VAC 85-265VAC
Freqency 50-60Hz 50-60Hz 50-60Hz 50-60Hz 50-60Hz
PowerFactor 0.95 0.95 0.95 0.95 0.95
LED
PHILIPSLUMILEDS
133PCSSMD3030
PHILIPSLUMILEDS
175PCSSMD3030
PHILIPSLUMILEDS
175PCSSMD3030
PHILIPSLUMILEDS
238PCSSMD3030
PHILIPSLUMILEDS
238PCSSMD3030
Power 100 120 150 200 240
LumenOutput 12000 14400 18000 24000 28800
LuminousEfficiency 120lm/W 120lm/W 120lm/W 120lm/W 120lm/W
CRI Ra>80 Ra>80 Ra>80 Ra>80 Ra>80
BeamAngle 120° 120° 120° 120° 120°
ColorTemperature
3000K/4000K/5000K/6000K
3000K/4000K/5000K/6000K
3000K/4000K/5000K/6000K
3000K/4000K/5000K/6000K
3000K/4000K/5000K/6000K
WorkingTemperature -30℃~+45℃ -30℃~+45℃ -30℃~+45℃ -30℃~+45℃ -30℃~+45℃
StorageTemperature -35℃~+60℃ -35℃~+60℃ -35℃~+60℃ -35℃~+60℃ -35℃~+60℃
IPGrade IP65 IP65 IP65 IP65 IP65
LumenMaintenance 70% (50,000Hrs) 70% (50,000Hrs) 70% (50,000Hrs) 70% (50,000Hrs) 70% (50,000Hrs)
Warranty
PackingDimension
(mm)
1PC320*320*205
1PC350*350*210
1PC350*350*210
1PC425*425*220
1PC425*425*220
NW/GW(Kgs)
1PC4.1/4.5
1PC6.0/6.5
1PC6.0/6.5
1PC8.0/8.5
1PC8.0/8.5
CE Drivers: 3 Years, MEANWELL Drivers: 5 Years
www.eneltec-led.com
Installation Manual
Screw the Circular Ring Tightly
Hang the Safety chain on the Hook
Lock Circular Ring to the Safety Chain carefully
Juunct ion boxinput
LED
L-Brown N - Blue -Green/YellowThen light up the lamp
CableAC 100-277V
Note:BrownL
N BlueGreen / Yellow
Please make sure the power off before opertionWarning
www.eneltec-led.com
Installation Manual
For Reference
Tight the nuts to expansion screws
Juunction b ox
inpu t
LE D
L-Brown N - Blue -Green/YellowThen light up the lamp
CableAC 100-277V
Note:BrownL
N BlueGreen / Yellow
Please make sure the power off before opertionWarning
Hammer
Expansion Screw
85.0mmor 3.15 in
Takes off the nut after expansion screws are well mounted
Drill holes according to the outlet on the canopy light
Double check of all drilled holes are right position as canopyoutlet before mounted.Use a hammer to hit expansion crews tightlyto ceiling,make sure it’s not loose.
Φ10mm
85.0mm