TRUCK MIXERSTRUCK MIXERS
TRUCK MIXERS
The IMER Group Concrete Machinery
Division, Le Offi cine Riunite Udine S.p.A.,
dedicated to the production of plants and
equipment for the production, transport and
distribution of concrete, is synonymous with
a complete customer service: design, tailored
to the requirements of individual building
yards thanks to the effi cient and fl exible
organization of the engineering department,
manufacture, and sale and after-sale service.
The service department makes it possible
to promptly meet the different requirements
of individual customers.
The rigidly selected staff, its constant
dedication to quality, the continuous
technological innovations and the application
of rigid controls have enabled the company
to reach high levels of performance in terms
of reliability and innovation. In confi rmation
of its constant care of environmental demands
and ecological respect, all the plants, truck
mixers and equipment are designed and
constructed in order to limit the noise
and the dust emission.
www.imergroup.com
DESIGN, SERVICE AND RESPECT FOR THE ENVIRONMENT:THE OUTCOME OF AUR ACTIONS
2 3
SPECIAL STEELS
THE MIXING DRUM OF THE L&T
TRUCK MIXERS IS MADE OF
WEAR-PROOF STEELS: the 30MnB5
steel is used for standard series and
the IMER WEAR for the superlight
series. Both steels have chemical and
mechanical characteristics that are
absolutely superior to the commonly
used steels.
For the 30MnB5, its high content of
chromium and boron guarantees a real
resistance to the wear and tear caused
by concrete.
For the IMER WEAR, its resistance
allows to reduce the steel sheet
thickness to 3 mm (really lighter),
keeping, or better, increasing, drum life.
A HIGH QUALITY MIXTURE
THANKS TO THE EXCLUSIVE
DESIGN OF THE MIXING BLADES
The exclusive design of the mixing
blades guarantees a mixture
homogeneity in all the drum
sections, keeping and improving the
characteristics of the transported
concrete.
L&T truck mixers meet the norms DIN
1045 – DIN 459 – AS 1371 ANNEX
“A” concerning the dry mixing
capacity.
TRUCK MIXERS
Type
IMER WEAR
30MnB5
27MnB5
Fe510
Thickness (mm)
3
4
4
5
ReH (N/mm2)
-
492
392
420
Rp0,2 (N/mm2)
800
492
392
447
Rm (N/mm2)
1050
700
615
520
Elongation A5 (%)
13
23,0
26,2
30
HB 30/10 (1/2)
300/350
200/220
179/179
n.d.
4 5
���������������
����
�������������
����������������
�������������
������������
Anticlockwise rotation is for countries
where traffi c drives on the left
(e.g. United Kingdom, Japan, Australia,
Hong Kong, Thailand).
Clockwise rotation is for countries
where traffi c drives on the right
(e.g. Continental Europe, United
States, Taiwan, America).
FOR EVERY COUNTRY IN THE WORLD
TRUCK MIXERS
6 7
TRUCK MIXERS
The L&T Truck Mixers are a real
system for concrete mixing and
transport according to high quality
and functional standards. Each
technical detail has been conceived,
designed and realized in order to make
the mixers work in perfect harmony
with the truck chassis destined for their
transport. A wide range of capacities
from 4 to 12 m3 of vibrated concrete
always guarantees low tares and
optimised carrying capacities.
All L&T Truck Mixers are equipped
with hydraulic transmissions and
gearboxes that allow to reach
the maximum rotation speed of
the mixing drum when the vehicle is
at 1500 revolutions/1’ (in comparison
with the usual 1800 revolutions/1’).
Such a characteristic allows
to diminish the fuel consumption,
to reduce the wear and tear and
to respect the environment (thanks
to the low sound emissions) and to
increase the service life of the engine.
INNOVATIVE AESTHETICS OFTHE DRUM WITH GREATER CAPACITY
8 9
LT3.7
LT4.7
LT5.7
LT6.7
LT7.7
LT7.7C
LT8.7
LT8XL.7
LT9.7
LT10.7
LT12XL.7
LT14.7
TECHNICALDATA
m3
6,748
7,872
8,721
10,125
12,022
12,022
13,116
13,902
16,048
17,452
19,931
22,800
GeometricalVolume
m3
3 (4)
4
5
6
7 (8)
7
8 (9)
8,5 (9,5)
9 (10)
10 (11)
12
14
NominalCapacity
kW
35
35
40
46
52
52
58
58
70
77
77
77
Max Req.Power
m3
4,043
4,971
5,472
6,645
8,319
7,823
9,054
9,546
9 ,998
11,201
13,040
14,400
WaterVolume
mm
4510
5009
5258
5549
6072
6053
6739
6739
7285
7628
8265
9145
Min. Lenght(D)
mm
4500
4772
4990
5249
5872
5853
6135
5135
6558
6901
7487
8548
Min. Lenght(H)
mm
2300
2300
2300
2300
2300
2500
2500
2500
2500
2500
2500
2500
Min. Width(D)
mm
2300
2300
2300
2300
2300
2300
2300
2300
2500
2500
2500
2500
Min. Width(H)
Kg.
2650
2800
2900
3100
3350
3350
3550
3650
4200
4400
4900
5200
Weight(H)
mm
2302
2378
2436
2533
2665
2581
2735
2735
2733
2793
2827
2856
Height
Kg.
3050
3250
3350
3600
3850
3850
4050
4150
4700
4900
5500
6000
Weight(D)
4x2
4x2
6x4
6x4
6x4
6x4
6x4
6x4
8x4
8x4
8x4
10x5
Axles
IN CAB CONTROLS
For managing the drum form the cabin.
DRUM SAFETY LOCK
All the IMER Group truck mixers are
provided with a special antirotation
mechanical locking device. This mechanism,
essential and easy to use, ensures the
absolute safety of all maintenance
operations inside the mixing drum.
FLIP-OVER CHUTE
Its ergonomy allows a practical and safe use
thanks to the anti- trapping and anti-shear device
(available in various lengths).
ELECTRIC CONTROL WITH CSD SYSTEM
For a constant speed of rotation of the mixing
drum regardless of the speed of the vehicle
motor, the IMER Group truck mixers can be
fi tted with the CSD device integrated in the
control panel for the electro-hydraulic controls
(option).
REAR WORKING LIGHT
The rear area of all truck mixers is the most
diffi cult to control. The installation of the rear
working light guarantees their perfect visibility
in all operating conditions.
TRUCK MIXERS
10 11
TECHNICALCHARACTERISTICS
ERGONOMIC SHAPE OF THE CASTLE
It is compact and easy to clean.
SINGLE CHUTE ARM WITH
OPTIMISED BRAKE
The single chute support features better availability
for roller greasing and access to the drum rotation
block. The handwheel offers a more ergonomic grip
and makes the chute “braking” operation quicker
and easier.
MANHOLE CONFIGURATION
WITH NEW SEAL
The new type of oval manhole is very linear
in appearance because there are no protrusions
where the material can pile up and it has
a perfect seal due to the use of a thick,
oval-shaped gasket.
MECHANICAL GEARBOX TO MEET
YOUR NEEDS
It is oversized to meet the high torque demanded
by the concrete drum.
TRUCK MIXERSTRUCK MIXERS
HYDRAULIC PUMP SUPPORT
The innovative support is bolted onto the
subframe in an intermediate position to
cover almost all the PTO pump positions,
resulting in a great advantage for our
fi tters.
12 13
WATER METERIt is mounted on the rear part of the truck
mixers.
TRIGGER TYPE CONTROLS (JOY)
AND EMERGENCY STOP
SAFETY GRID
For the safe inspection of the charging
hopper.
MUD FLAPS
MUDGUARDS
They are available in steel or alluminium
(for the superlight version).
TRUCK MIXERS
WATER TANK
All IMER Group truck mixers are
provided, in the standard version,
with a 650 l water tank, and for
option available in different size,
stainless steel or pressurized systems.
14 15
NEW FALL-PREVENTION SYSTEM
The new fall-prevention system has been
engineered to keep within the machine
clearance and to avoid taking the right
handoff when going up to the platform.
The system is operated directly by the
operator when he is on the platform.
REAR BUMPER
The rear bumper (also available
in retractable and fi xed version) is
extremely safe, practical to use
and very fl exibile on site.
SUPERLIGHT EXTENSION CHUTES
The standard supply includes two
“superlight” polystone extension chutes.
Their lightness (only 7 kg) makes them
extremely easy to handle, cutting down
the risk of accidents to a minimum.
TRUCK MIXERS
SIDE ALUMINIUM CYCLIST BARRIERS
Special “anticatch” barriers ensure safety
on the road and in the working site during
the usual operations of the truck mixer.
16 17
ERGONOMIC LADDER
The slip proof steps and the
larger platform allow a perfect
visual of the concrete in safety.
CLOSING FLAP
The simple and practical closing fl ap stands out
for its cost effi ciency in preventing the spills of
grouts and concrete residues during the move-
ments of the discharge chute, avoiding pollution
to the environment in the vicinity of the casting
operation.
OPTIONALS
TOOL BOX
“A place for everything, everything in its place”.
Sometimes wasting time, or even losing tools along
the way, can be not only costly but also extremely
dangerous.
ADDITIVE TANK
The stainless-steel pressure tank for additi-
ves is provided with a pressure-control safety
system and a level control for perfect metering.
The corrosion-resistant tank is fi tted with a
large safety cap for fast and easy fi lling.
VIBRATOR ON DISCHARGE CHUTE
This dispositive allows, during the discharge,
an optimum fl ow even in presence of special
concrete.
SIDE PROTECTION GUARDS
Their function is to protect the vehicle from
the eventual corrosive action of the special
concrete and demoulding chemicals.
LT555 TELESCOPIC CHUTE
The LT 555 telescopic chute is an
important accessory designed to increase
the versatility of the L&T truck mixer.
The LT 555 telescopic chute, extending
to 4.5 metres in length (5.5 metres with
the funnel end), can be ordered in all
models. Reliable and safe, with a stainless-
steel construction: it is light, strong and
extremely manoeuvrable, both vertically
and radially.
TRUCK MIXERS
18 19
ECOLOGICAL HYDRAULIC PLUG
The charging of dry material in the
batching plant and the following mixing in
the drum mixer are a cause of dust spills
from the drum: this closing device defi nitely
solves this problem. Adapting the L&T
truck mixers to a philosophy of respect for
health and the environment is fast and
convenient.
HYDRAULIC HALF PLUG
To carry particularly fl uid material on rough
or steep terrain, it becomes necessary to
install the hydraulic half plug to prevent
spills of polluting material during the
journey or inside the work yard.
TRUCK MIXERS
20 21
These special truck mixers are installed
on large building sites and are able to
transport up to 14 m3 of concrete. They
are usually installed on large building
sites, so the truck is immediately free
and can be used for other operations.
This mixer is absolutely independent
from the truck and it is a stock of
concrete ready to be used on site.
It is available with 2 or 3 axles
depending on the local regulations or
the number of the axles of the truck.
TRUCK MIXERS
ARTIC SEMI-TRAILER MIXERS
22 23
TRUCK MIXERS
The new range of SUPER LIGHT
truck mixers has been completely
redesigned to guarantee maximum
payload, in full compliance with the
weight limits of the traffi c regulations.
Thanks to the special IMER WEAR
steel, it is superlight and much more
wear resistant.
The mixing drum is realized in
special IMER WEAR steel having
mechanical characteristics superior
to the materials utilized so far for
constructing truck mixers. The wear
resistance of the IMER WEAR steel
allows to reduce the steel sheet
thickness up to 3 mm, keeping, or
better, increasing, its life.
SL SUPERLIGHT TRUCK MIXERS
24 25
ALUMINIUM WATER TANK ALUMINIUM MUDGUARDS LIGHTWEIGHT DISCHARGE CHUTE
IN WEAR RESISTANT MATERIAL
TRUCK MIXERS
SUPERLIGHT AND EXTREMELY
RESISTANT DRUM IN IMER WEAR
STEEL
26 27
SUPERLIGHT EXTENSION CHUTES
SL SUPERLIGHT TRUCK MIXERS
LT3.7 SL
LT4.7 SL
LT5.7 SL
LT6.7 SL
LT7.7 SL
LT7.7C SL
LT8.7 SL
LT8XL.7 SL
LT9.7 SL
LT10.7 SL
LT12.7 SL
LT14.7 SL
TECHNICALDATA
m3
6,748
8,584
9,440
10,854
12,766
12,766
13,868
14,014
16,143
17,648
19,931
22,800
GeometricalVolume
m3
3 (4)
4
5
6
7 (8)
7
8 (9)
8,5 (9,5)
9 (10)
10 (11)
12
14
NominalCapacity
kW
35
35
40
46
52
52
58
58
70
77
77
77
Max Req.Power
m3
4,043
4,910
5,568
6,688
8,279
7,875
9,011
9,580
10,024
11,241
13,040
14,400
WaterVolume
mm
4510
5009
5258
5549
6072
6053
6739
6739
7285
7628
8265
9145
Min. Lenght(D)
mm
4500
4772
4990
5249
5872
5853
6135
5135
6558
6901
7487
8548
Min. Lenght(H)
mm
2300
2300
2300
2300
2300
2500
2500
2500
2500
2500
2500
2500
Min. Width(D)
mm
2300
2300
2300
2300
2300
2300
2300
2300
2500
2500
2500
2500
Min. Width(H)
Kg.
2405
2486
2648
2855
2855
3032
3090
3599
3858
4050
4444
Weight (H SL)
mm
2302
2378
2436
2533
2665
2581
2735
2735
2733
2793
2827
2856
Height
Kg.
2855
2936
3148
3355
3355
3532
3590
4099
4358
4650
5244
Weight(D SL)
4x2
4x2
6x4
6x4
6x4
6x4
6x4
6x4
8x4
8x4
8x4
10x5
AxlesTECHNICALCHARACTERISTICS
L&T DETACHABLES TRUCK MIXERS
L&T truck mixer range also includes the detachables truck mixers. They
are offered in two versions for the two categories of vehicles: those
equipped with manual anchoring system and those with remote control
anchoring system (as following in the pictures).
TRUCK MIXERS
28 29
SERVICE TEAMFOCUS TO THE CUSTOMER
SALES DEPARTMENTGianfranco Amaddeo: Sales Director
Italy
Alfonso Sciandra: Area Manager
Paolo Berton: Area Manager
Export
Michele Sebastiani: Export Area Manager
Elia Vendramini: Export Area Manager
Massimo Grosso: Export Area Manager
Malvio Leita: Export Area Manager
MARKETING DEPARTMENTLoredana Viel: Marketing Manager
TECHNICAL ASSISTANCE AND SPARE PARTS DEPARTMENTLorenzo Maestroni: After sales Manager
Andrea Carta: Sales of Spare Parts
Mario Cristin: Technical Assistance
CUSTOMER CARETamara Venier
ACCOUNTING DEPARTMENTMariolina Murianni: Accounting Manager
+39.0432.562131
+39.0432.563965
+39.0432.563975
+39.0432.563976
+39.0432.563927
+39.0432.563974
+39.0432.563920
+39.0432.563985
+39.0432.562131
+39.0432.563982
+39.0432.563926
+39.0432.563809
+39.0432.563924
+39.0432.563980
+39.0432.563925
+39.0432.561463
+39.0432.563959
fax
ph.
ph.
ph.
ph.
ph.
ph.
ph.
fax
ph.
fax
ph.
ph.
ph.
ph.
fax
ph.
30 31
Le Officine Riunite - Udine S.p.A. si riservano il diritto di variare senza preavviso i dati esposti quando vi siano giustificati motivi. I dati e le misure non sono quindi da ritenersi impegnativi. Le illustrazioni possono contenere accessori e quindi non conformi alle versioni standard delle macchine.
Le Officine Riunite - Udine S.p.A. reserve the right to change the information contained herein without prior notice where they consider it justified. The data and dimensions are therefore not to be considered as binding. The illustrations may include accessories and therefore they could be slightly different from the standard versions of the equipment.
Le Officine Riunite - Udine S.p.A. Concrete Machinery DivisionVia Santa Caterina, 35 · 33030 Basaldella di Campoformido (Ud)Tel. +39 0432 563911 · Fax +39 0432 562131E-mail: [email protected] · www.imergroup.com
ED
IZIO
NE
1/2
008