![Page 1: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/1.jpg)
NON-NEWTONIAN FLUIDS
![Page 2: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/2.jpg)
PRESENTED TO: PROF.DR.H.M. ANWAR ASGAR
PRESENTED BY: SALMAN HAROON (MSC-13-S-07) MUHAMMAD NOMAN ARIF (MSC-13-S-09) SANAULLAH KHAN (MSC-13-S-32)
![Page 3: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/3.jpg)
Newtonian Fluids Those fluids which follow Newton law of viscositywhen shear stress is plotted against shear rate at a given temperature, the plot shows a straight line with a constant slope that is independent of shear rate. Fluid such as water, air, ethanol, and benzene are NewtonianNon-Newtonian fluids Any fluids that do not obey the Newtonian relationship between shear stress and shear rate are non-Newtonian. Aqueous solutions of high molecular weight polymers or polymer melts, and suspensions of fine particles are usually non-Newtonian.
![Page 4: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/4.jpg)
Non-Newtonian Fluids
blood toothpaste ketchup
grease cake batter polymer melt
![Page 5: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/5.jpg)
Models of Non-Newtonian Fluids
The expressions shown here are used to characterize the non-Newtonian behavior of fluids under equilibrium, steady shear flow conditions. models those having a direct and significant implication for suspensions, gels and pastes have been included here. grease
wet sand corn flour
![Page 6: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/6.jpg)
Non-Newtonian Fluids
molten metal whipped
cream
paint
![Page 7: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/7.jpg)
Power-law Model
One of the most widely used forms of the general non-Newtonian constitutive relation is a power-law model, which can be described as
where Tau is shear stress, gama is shear rate, m and n are power-law model constants. The constant, m , is a measure of the consistency of the fluid: the higher the m is, the more viscous the fluid is. n is a measure of the degree of non-Newtonian behavior: the greater the departure from the unity, the more pronounced the non-Newtonian properties of the fluid are.One of the obvious disadvantages of the power-law model is that it fails to describe the viscosity of many non-Newtonian fluids in very low and very high shear rate regions.
![Page 8: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/8.jpg)
Cross Model
As discussed in the previous section, the power law model does not have the capability of handling Newtonian regions of shear-thinning fluids at very low and high shear rates. In order to overcome this drawback of the power-law model, Cross (1965) proposed a model that can be described as
![Page 9: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/9.jpg)
In above equation η0 and η ∞ are the viscosities at very low
and high shear rates, respectively m and n are the model constants. At an intermediate shear rate, the Cross
model behaves like a power-law model. However, unlike the power-law model, the Cross model produces Newtonian viscosities (η0 and η∞ ) at both very low and high shear rates.
![Page 10: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/10.jpg)
TYPES OF FLUIDS1) Newtonian Fluids2) Non-Newtonian FluidsNewtonian Fluids:Those fluids which follow newton law of viscosity.when shear stress is plotted against shear rate at a given temperature, the plot shows a straight line with a constant slope that is independent of shear rate. Fluid such as water, air, ethanol, and benzene are Newtonian.Non-Newtonian fluidsAny fluids that do not obey the Newtonian relationship between shear stress and shear rate are non-Newtonian. Aqueous solutions of high molecular weight polymers or polymer melts, and suspensions of fine particles are usually non-Newtonian.
![Page 11: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/11.jpg)
Models of Non-Newtonian Fluids The expressions shown here are used to
characterize the non-Newtonian behavior of fluids under equilibrium, steady shear flow conditions. models those having a direct and significant implication for suspensions, gels and pastes have been included here.
![Page 12: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/12.jpg)
Power-law Model
One of the most widely used forms of the general non-Newtonian constitutive relation is a power-law model, which can be described as
where m and n are power-law model constants. The constant, m , is a measure of the consistency of the fluid: the higher the m is, the more viscous the fluid is. n is a measure of the degree of non-Newtonian behavior: the greater the departure from the unity, the more pronounced the non-Newtonian properties of the fluid are.One of the obvious disadvantages of the power-law model is that it fails to describe the viscosity of many non-Newtonian fluids in very low and very high shear rate regions.
![Page 13: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/13.jpg)
Cross Model
As discussed in the previous section, the power law model does not have the capability of handling Newtonian regions of shear-thinning fluids at very low and high shear rates. In order to overcome this drawback of the power-law model, Cross (1965) proposed a model that can be described as
![Page 14: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/14.jpg)
In above equation η0 and η ∞ are the viscosities at very low
and high shear rates, respectively m and n are the model constants. At an intermediate shear rate, the Cross
model behaves like a power-law model. However, unlike the power-law model, the Cross model produces Newtonian viscosities (η0 and η∞ ) at both very low and high shear rates.
![Page 15: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/15.jpg)
Bingham Plastic Model Many types of food stuffs exhibit a yield
stress and are said to show a plastic or viscoplastic behavior
One of the simplest viscoplastic models is the Bingham plastic model
![Page 16: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/16.jpg)
Expression of Bingham Plastic Model
Taken from Schlumburger Oilfields
![Page 17: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/17.jpg)
Examples of Bingham Plastic Fluids
Tooth Paste Handling of Slurries Mud flow in drilling
![Page 18: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/18.jpg)
Bingham Plastic Fluid Example
A Bingham plastic flows in a pipe and it is observed that the central plug is 30mm diameter when the pressure drop is 100 Pa/m.Calculate the yield shear stress.Given that at a larger radius the rate of shear strain is 20 s-1 and the consistency coefficient is 0.6 Pa.s. Calculate the shear stress.
![Page 19: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/19.jpg)
The pressure difference p acting on the cross-sectional area must produce sufficient force to overcome the shear stress ᴛ acting on the surface area of the cylindrical slug. For the slug to move, the shear stess must be atleast equal to the yield value ᴛy.Balancing the forces gives
Bingham Plastic Fluid Example
![Page 20: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/20.jpg)
Bingham Plastic Fluid Example
![Page 21: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/21.jpg)
Why does Bingham Plastic Model not able to handle Shear-thinning characteristics of Non-
Newtonian Fluids?
The Bingham plastic model can describe the viscosity
characteristics of a fluid with yield stress whose viscosity is
independent of shear rate
![Page 22: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/22.jpg)
Casson Model
This model was originally introduced by Casson (1959)for the prediction of the flow behavior of pigment-oil suspensions
The Casson model is based on a structure model of the interactive behavior of solid and liquid phases of a two-phase suspension
The model describes the flow of viscoplastic fluids
![Page 23: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/23.jpg)
where k is a Casson model constant
The Casson model shows both yield stress and shear-thinning non-Newtonian viscosity
Casson model can be described mathematically as:
![Page 24: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/24.jpg)
Casson Model Fluids
Jelly Tomato sauce Honey Molten milk
chocolate
GelLotion
![Page 25: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/25.jpg)
HERSCHEL-BULKLEY MODEL
The Herschel-Bulkley model extends the simple power-law model to include a yield stress as follows
![Page 26: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/26.jpg)
Like the Casson model, it shows both yield stress and shear-thinning non-Newtonian viscosity, and is used to describe the rheological behavior of food products and biological liquids [Ferguson and Kemblowski, 1991; Holdsworth, 1993]. In addition, the Herschel-Bulkley model also gives better fit for many biological fluids and food products than both power-law and Bingham plastic models.
![Page 27: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/27.jpg)
Powell-Eyring Model
Derived from the theory of rate processes, this relation is relevant primarily to molecular fluids, but can be used in some cases to describe the viscous behavior of polymer solutions and viscoelastic suspensions over a wide range of shear rates. Here, is the infinite shear viscosity 0 is the zero shear viscosity and the fitting parameter represents a characteristic time of the measured system. If 0 and are not known independently from experiment, these quantities may be treated as additional adjustable parameters.
![Page 28: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/28.jpg)
Importance of Non-Newtonian Fluid In Process industries we deal different types of non-
newtonian fluids so their properties helpful in processes as
• Liquids and semisolids are usually pumped during processing, so in case of fluids if we now properties of non-newtonian fluids we avoid problems like caviation,bubbles etc.
• If we know properties of different non-newtonain fluid then we better tackle different non-nowtonian fluids like Food suc as butter, cheese, jam, ketchup, mayonnaise, soup, taffy, and yogurt Natural substances such as magma, lava, gums, and synovial fluid Slurries such as cement slurry and paper pulp, emulsions such as mayonnaise, and some kinds of dispersions.
![Page 29: Transport Phenomena Presentation on Non-newtonian Fluids](https://reader033.vdocuments.us/reader033/viewer/2022061510/56d6bdca1a28ab30168f595f/html5/thumbnails/29.jpg)
• Viscosity plays a huge part in pump and conveyance system design.
• Viscosity may be dependent on moisture content, concentration, composition and prior treatments.