Timber, Machining & Profile Manufacturing
One Solution for all your Timber
and Manufacturing requirements
With 200 years’ combined experience adding value through selection
Select and CollectWe offer a select and collect service from our vast Claybrooke Magna site. Call us on:
t: 01455 209121 (sawn/timber)
t: 01606 555500 (machining/profile manufacturing)
Timber
From purchasing the right material to stringent quality control for exceptional quality oak, hardwoods and softwood, we pride ourselves in timber selection.
Through and through or cut with one square edge, our longest and straightest seasoned logs are allowed to stabilise for two to five years. Many larger oak logs are traditionally quarter sawn. Our timber is air dried before kilning.
We are fully aware of our obligations under the European Union Timber Regulations (EUTR) as a timber importer and fully committed to ensuring the legality and sustainability of our supply base.
Processing/Kilning
Logs are sawn through and through or cut with one square edge and seasoned. Some larger logs, particularly the longest and straightest are set aside to stabilise for 2-5 years. Many of our larger Oak logs are quarter sawn in the traditional way.
Our timber is air dried on site and extreme care is taken to keep species protected from high winds and sun which require slow drying to minimise damage or distortion. Less durable species are stored in our covered areas to retain good colour and we prefer to kiln dry timber that has been air dried first.
AN ON-SITE VACUUM KILNING SERVICE IS AVAILABLE FOR SQUARE EDGED OR WANEY EDGED TIMBER TO MEET MOISTURE CONTENT REQUIREMENTS. WE ALSO OFFER SOFTWOOD KILN DRYING.
Manufacturing
With our own tooling and a highly skilled, fully trained timber tooling facilities team, we are able to offer standard profiles to solutions for the most complex machining challenges, working to fine tolerances and exacting standards.
A wide range of high-tech machinery is on site and we are able to offer same day tooling and manufacturing.
Constructional Timber
Whitmore’s offer a range of construction sizes, particularly in English and Continental Oak, in lengths of up to 50’ making them suitable for churches, country houses and historic property renovation.
Our graders are fully trained and graded beams are available from stock for immediate delivery.
Oak Specialist
Flooring/End Matching
Clear Grade Softwoods MDF Profiles
Kilning
African
American Machining ServiceHardwood Timbers
Decking Veneer Wrapping Cladding Estimating/ Field Support
Bespoke Engineered Timbers
Whitmore’s are a long established supplier with decades of experience. Following many timber acquisitions over the years, a wealth of knowledge remains within the company with over 200 years' combined experience - enabling us to supply everything you need.
A single source partner with £2.7 million pounds of stock holding at sites in Cheshire and Leicestershire, Whitmore’s have an extensive and impressive range of quality, sustainably sourced, selected hardwoods and serve many markets, from construction, joinery and restorative work to furniture production and boat building.
With on-site stocks of timber, kilning, milling and machining facilities at our own premises, we are able to offer a rapid turnaround and nationwide delivery.
BMT-COC-0011PEFC/16-37-025The FSC® logo identifies
products which contain wood from well managed forests independently certified in accordance with the rules
of the FSC®.FSC® Trademark TT-COC-001868
Registration number BMT-COC-0011
BM TRADA certification scheme covers the SFI, MTCC and CSA schemes
Promoting sustainable forest
Management
Equipment, Facilities and Service
Band Saws
Multi Rip Equipment
Sanding Masters
Straight Line Edgers
Planers
Moulders – with multi capacity width and thicknesses
MDF Profiles
What makes Whitmore's different?
We offer a unique service with a quick turn-around for all your bespoke manufacturing needs.
Lippings, laminated timber components and solid hardwood flooring are also available in addition to CNC components.
Alongside our wide range of high-tech equipment, we have extensive machinery for standard work.
Call our experienced machining team on t: 01606 555500 or email us via [email protected]
Accuracy, Flexibility and Versatility
Cross Cutting Optimiser – for perfectly accurate precision cutting
Tongue and Groove Profiling – can also be applied for end matching
Real Wood Veneer Wrapping – for MDF and metal / aluminium
Flooring Blocks – offering a unique manufacturing service of machined all round
Bespoke Timber Laminating Service - any size / any section
Circular Ring Beads
Unique Machining - chair arms, legs and dowel jointed & mitred picture frames
If you need it - we can supply it!
Bespoke Machining and Component Manufacturing
Whitmore's offer a complete machining and component manufacturing service from stock.
A full range of solid hardwood profiles and veneer wrapped profiles are available in random or cross-cut lengths to suit, alongside a vast range of standard profiles.
Our experts can match any bespoke item in timber or MDF routinely producing specific cutters for the job.
Talk to the experts now on 01606 555500.
We'll solve your Moulding Challenges
With our extensive experience, dedication and specialist knowledge, we are confident we can meet ALL YOUR MOULDING CHALLENGES – from simple to highly complex mouldings in any range, material or style.
Tooling
We have in house tooling, and a team of highly trained professionals to enable a job to be requested, tooled up and into production without any delay.
• In house design and tooling – able to order and turn out on the same day
• Small to large machining jobs
• Nationwide delivery
Machining and Profile Manufacturing
Whitmore's offer a unique service with a quick turn-around for all your bespoke manufacturing needs. Our experienced team are always available to discuss your requirements.
A full manufacturing service for quality solid hardwood, MDF profiles, lippings and veneer wrapped profiles amongst others is available which can be supplied in random or cross cut lengths to suit your requirements.
From complex veneer wrapping to tongue and groove end matching and flooring blocks through to laminated timber and circular ring beads, we have the equipment and skills to do the lot.
CNC – bespoke components
Door architrave set – wrapped and labeled matching packs of door casings and skirtings
Flooring blocks
Picture Frame Mitering, chair arm and leg machining and dowel jointing
On Site Tool Room - enables us to meet your machining needs without delay
Highly Skilled teams available to meet your machining and manufacturing challenges
Door Lipping
Whitmore's operate in full compliance with the European Union Timber Regulation (EUTR).
Specialist Profiles and Service
Square Edged 1” 1¼” 1½” 2” 2½” 3” 4”Alder, Western Red ✔ ✔ ✔ ✔ ✔ ✔
Ash, Am. White* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Ash, Strips* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Ash, Thermo Strips* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Beech, CND Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Beech, Steamed Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Beech, White Euro* ✔ ✔ ✔ ✔ ✔ ✔
Cherry, Am* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Chestnut, Euro* ✔ ✔ ✔
Chesnut, Strips Euro* ✔
Elm, Red Am* ✔ ✔ ✔
Lime, Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Maple, Hard Am* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Maple, CND Am* ✔ ✔ ✔
Oak, Red Am* ✔ ✔ ✔ ✔ ✔ ✔
Oak, Red Am Coffin Stock* ✔
Oak, White Am* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Oak, White Am Strips* ✔
Oak, Euro, Prime* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Oak, Euro. Pippy Grade* ✔ ✔ ✔ ✔ ✔
Oak, Euro. Squares* ✔ ✔ ✔
Oak, Euro. Rustic* ✔ ✔ ✔ ✔
Oak, Euro. Character* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Tulipwood Am. (Poplar)* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Walnut, Am. Black* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Walnut, Croation* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Waney Edged ¾ 1” 1¼” 1½” 2” 2½” 3” 4”Ash, Euro* ✔ ✔ ✔ ✔ ✔ ✔
Beech, White Euro* ✔ ✔ ✔ ✔ ✔
Elm, Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Cedar of Lebanon ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Chestnut, Sweet Euro* ✔ ✔ ✔ ✔ ✔
Lime, Euro ✔ ✔ ✔ ✔ ✔ ✔ ✔
Pear, Swiss Euro ✔ ✔ ✔ ✔ ✔ ✔ ✔
Sycamore, Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Rippled Sycamoe, Euro ✔ ✔ ✔ ✔
Walnut, Euro ✔ ✔ ✔ ✔ ✔ ✔ ✔
TROPICAL HARDWOODSSquare Edged 1” 1¼” 1½” 2” 2½” 3” 4”ldigbo ✔ ✔ ✔ ✔ ✔ ✔ ✔
Iroko* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Jatoba* ✔ ✔
Lemonwood ✔ ✔ ✔
Lignum Vitae (Dimension stock)Louro, Red* ✔ ✔ ✔
Koto ✔ ✔
Meranti* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Sapele* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Teak* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Utile* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Wenge ✔ ✔ ✔ ✔
Log Sawn ¾ 1” 1¼” 1½” 2” 2½” 3” 4”
Bubinga ✔ ✔ ✔ ✔
Guarea ✔
Ovangkol ✔ ✔ ✔ ✔ ✔ ✔
Padauk ✔ ✔ ✔ ✔ ✔
Sapele * ✔
Utile* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Zebrano ✔ ✔ ✔ ✔
Waney Edged ¾ 1” 1¼” 1½” 2” 2½” 3” 4”
Oak, Prime Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Oak, Swiss Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Oak, Pippy Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Oak, Brown Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Oak, Stainy Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Oak, Character Euro* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
* species are normally available with either FSC®/PEFC or other certificationSolid logs cut and kiln dried as required
CONSTRUCTIONAL TIMBERS
1” 1¼” 1½” 2” 2½” 3” 4” 5” 6”up to 12”
Angelim Vermelho ✔ ✔ ✔
Balau (p.h.n.d) ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Cumaru* ✔ ✔ ✔ ✔
Ekki* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Oak* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Greenheart* ✔ ✔ ✔ ✔ ✔ ✔
Ipe* ✔ ✔ ✔ ✔ ✔
Purpleheart ✔ ✔ ✔ ✔
Red Louro* ✔ ✔ ✔
Massaranduba* ✔ ✔ ✔
Okan* ✔ ✔
Opepe* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Douglas Fir* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
(p.h.n.d = Pin Hole No Defect)
CLEAR GRADE SOFTWOODS
¾ 1” 1¼” 1½” 1¾” 2” 2½” 3” 4 6
Douglas Fir* ✔ ✔ ✔ ✔ ✔ ✔ ✔
Hemlock ✔
Western Red Cedar* ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Southern Yellow Pine* ✔
Pitch Pine ✔ ✔ ✔ ✔ ✔
Vertical Grain 2x4” 2x5” 2x6” 2½x3” 2½x4” 2½x5” 3x5”
Douglas Fir* ✔ ✔ ✔ ✔ ✔
European Softwoods 1” 1¼” 1½” 2” 2½” 3”
Siberian Larch* ✔ ✔ ✔ ✔ ✔
Thermowood ✔ ✔ ✔
TEMPERATE HARDWOODS TROPICAL HARDWOODS CONSTRUCTIONAL TIMBERS SOFTWOODS
Square Edged Waney Edged Square Edged Waney Edged Clear Grade Vertical Grain
European Ash European Ash Agba Bubinga Angelim Vermelho Cedar Shingles Douglas Fir
European Thermo Ash Strips European White Beech Anigre Guarea Balau (MGR, p.h.n.d.) Douglas Fir Hemlock
European White Beech European Steamed Beech ldigbo Iroko Cumaru Hemlock
European Steamed Beech European Spalted Beech Iroko Mahogany, Khaya Douglas Fir Pitch Pine Merchantable
European CND Beech European Cedar of Lebanon Jatoba Ovangkol Ekki Southern Yellow Pine Douglas Fir
European Chestnut European Cherry Koto Padauk Greenheart Western Red Cedar
European Chestnut Strips European Sweet Chestnut Lemonwood Sapele Ipe
European Elm European Elm Lignum Vitae Utile Red Louro EUROPEAN SOFTWOODS
European Lime European Lime Meranti Zebrano Massaranduba Siberian LarchEuropean Croatian Black Walnut
European Oak Red Louro Oak Thermowood
American Red Alder European Swiss Pear Sapele Okan
American White Ash European Sycamore Teak Opepe
Canadian Beech European Walnut Utile Purpleheart
American Cherry WengeEkki & Opepe logs in stock – sawn to bespoke requirements within 7-10 days. Most available with FSC® CertificationAmerican Red Elm
American Hard Maple
American CND Hard Maple
American Solt Maple
American Birds Eye Maple
American Red Oak
American Red Oak Coffin Stock
American White Oak
American White Oak Strips
American Tulipwood (Poplar)
American Black Walnut
EUROPEAN OAK
Square Edged Waney Edged
Prime Swiss
Light Character Prime
Character Light Character
Pippy Character
Rustic Pippy
Strips Rustic
Shorts Stainy
EUROPEAN OAK BEAMS
Fresh Sawn QPA & QPI Grade - Sawn to size direct from the Sawmill
Air Dried (1 vear & longer) available ex stock
All Beams can be visually stress graded on site to meet BS 5756:2007
DK DECKING RANGE
Balau Opepe*
Cumaru* Red Louro*
Ipe* Ekki*
Massaranduba* Garapa
Decking is supplied in 1.8m to 6.1m lengths
A bespoke maching service is also available for individual specification
SPECIES STOCKED
Andy Heald Sales Director
Andrew Rankine General Director
Chris Deacon*
Geoff Negus* & Lloyd Clarkson**
Richard Matts**
Nick Massey* & Alex Broadbent**
Paul Warner* & Lloyd Clarkson**
Russ Garner*, Chris Deacon* & Mark Mayne**
Richard York Long* & Mark Mayne**
Chris Taylor* & Andy Rankine**
* Field based ** Office based
Our experienced teams are here to help
With 200 years’ combined experience adding value through selection
Registration number BMT-COC-0011BM TRADA certification scheme covers the SFI, MTCC and CSA schemes
The FSC® logo identifies products which contain wood from well managed forests independently certified in accordance with the rules of the FSC®.FSC® Trademark TT-COC-001868
PEFC/16-37-025Promoting sustainable forest management
SAWN / TIMBER t: 01455 209121 f: 01455 209041 e: [email protected]
MACHINING / PROFILE MANUFACTURING t: 01606 555500 f: 01606 555511 e: [email protected]
www.whitmores.co.uk
Hardwood Timbers
Oak Specialist
African
American
Decking
Clear Grade Softwoods
Machining Service
Veneer Wrapping
Bespoke Engineered Timbers
Flooring/End Matching
Cladding
MDF Profiles
Kilning
Estimating/ Field Support
Andy Heald Sales Director
Andrew Rankine General Director
Chris Deacon*
Geoff Negus* & Lloyd Clarkson**
Richard Matts**
Nick Massey* & Alex Broadbent**
Paul Warner* & Lloyd Clarkson**
Russ Garner*, Chris Deacon* & Mark Mayne**
Richard York Long* & Mark Mayne**
Chris Taylor* & Andy Rankine**
* Field based ** Office based