Download - The single slit, diffraction
![Page 1: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/1.jpg)
Diffraction
• Today– Single-slit diffraction
– Diffraction by a circular aperture
– Use of phasors in diffraction
– Double-slit diffraction
![Page 2: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/2.jpg)
Diffraction by a single slit
![Page 3: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/3.jpg)
Single slit: Pattern on screen
Bright and dark fringes appear behind a single very thin slit.
As the slit is made narrower the pattern of fringes becomes wider.
![Page 4: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/4.jpg)
Single Slit:
finding the minima
Divide the single slit into
many tiny regions. If the top
ray and the middle ray
interfere destructively, then
every pair of rays will also.
So each pair cancels each other
and we have total cancellation!
![Page 5: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/5.jpg)
Single Slit:
the first minimumSo we get destructive
interference if:
(((( )))) (((( ))))2/sin2/ λλλλθθθθ ====a
λλλλθθθθ ====sina
Note this mustn’t be confused for
the condition for constructive
interference in the two-slit case!
Also note as slit width gets smaller,
angle gets larger, and vice versa.
![Page 6: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/6.jpg)
Dark Fringes
in Diffraction
First dark fringe.
Second dark fringe?
![Page 7: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/7.jpg)
Dark fringesFirst is at
(((( ))))λλλλθθθθλλλλθθθθ
2sin
2/sin4/
====
====
a
a
λλλλθθθθ ====sina
As we move up on the screen the next
dark fringe occurs when the first ray
interferes destructively with the one
from one-fourth the way down the slit.
λλλλθθθθ ma ====sin
Again note as slit gets narrower, pattern gets wider.
We can continue to one-sixth, one-eighth,
etc. to get all the dark fringes at
![Page 8: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/8.jpg)
Summary of single-slit diffraction
• Given light of wavelength λ passing through a slit of width a.
• There are dark fringes (diffraction minima) at angles θ given by a sin θ = mλ where m is an integer.
• Note this exactly the condition for constructiveinterference between the rays from the top and bottom of the slit.
• Also note the pattern gets wider as the slit gets narrower.
• The bright fringes are roughly half-way between the dark fringes. (Not exactly but close enough.)
![Page 9: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/9.jpg)
Example: Problem 37-2
Light of wavelength 441 nm is incident on a
narrow slit. On a screen 2 meters away, the
distance between the second diffraction minimum
and the central maximum is 1.5 cm.
(a) Calculate the angle of
diffraction θ of the second
minimum.
(b) Find the width of the slit.
![Page 10: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/10.jpg)
Example: (cont’d)
(a) Calculate the angle of
diffraction θ of the second
minimum.
(b) Find the width of the slit.
rad
D
y
3
2
105.7
2
105.1tan
−−−−
−−−−
××××====
××××========≅≅≅≅ θθθθθθθθ
mm
ma µµµµθθθθλλλλ
6.117105.7
104412
3
9
====××××××××
======== −−−−
−−−−a
m
ma
λλλλθθθθθθθθ
λλλλθθθθ
====≅≅≅≅
====
sin
sin
![Page 11: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/11.jpg)
Diffraction by a circular aperture
Consider a round hole of
diameter d. Same idea as a
long slit – only the geometry
is different.
Angle for first minimum:
λλλλθθθθ ====sinaLong slit:
Circular hole: λλλλθθθθ 22.1sin ====d
![Page 12: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/12.jpg)
The Rayleigh Criterion
Using a circular instrument (telescope, human eye),
when can we just resolve two distant objects?
When images are separated by distance to first
minimum: dR /22.1 λλλλθθθθ ====
![Page 13: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/13.jpg)
Sample Problem 36-4
Camera or eye:
dR /22.1 λλλλθθθθ ====Smallest resolvable angle
to two distant objects:
![Page 14: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/14.jpg)
Single slit phasor diagram
See we get destructive interference if first and
last phasors interfere constructively!
So the condition for
the mth dark fringe is:λλλλθθθθ ma ====sin
Divide slit into many tiny slits. Use a tiny phasor
for each. Add them together graphically.
![Page 15: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/15.jpg)
Multiple-Slit Diffraction
Now we can finally put together our
interference and diffraction results to see
what really happens with two or more slits.
RESULT: We get the two-slit (or multiple-slit)
pattern as in chapter 35, but modified by the
single-slit intensity as an envelope.
Instead of all peaks being of the same
height, they get weaker at larger angles.
![Page 16: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/16.jpg)
Double-Slit
Diffraction
a = slit width
d = slit separation
θθθθ = angle on screen
Bright fringes due to 2-slit
interference: dm /λλλλθθθθ ====
L,/2,/ aa λλλλλλλλθθθθ ====Zero due to diffraction:
![Page 17: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/17.jpg)
Double-slit diffraction
2 slits of zero width
1 slit of width a = 5λλλλ
2 slits of width a = 5λλλλ
![Page 18: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/18.jpg)
Diffraction grating: Many SlitsVery sharp maximum
when all rays are in phase.
λλλλθθθθ md ====sin
First-order maximum:
d/sin λλλλθθθθ ====Second-order maximum:
d/2sin λλλλθθθθ ====
m = “order” = 1, 2, 3, …
![Page 19: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/19.jpg)
Diffraction grating bright lines
λλλλθθθθ md ====sin
Second-order maximum:
First-order maximum:
Spectroscopy: separate lines of different wavelengths.
![Page 20: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/20.jpg)
Diffraction grating recap
λλλλθθθθ md ====sin
Position of lines is
determined by
separation of rulings.
Sharpness of lines is
determined by number
of rulings.
Nd/λλλλθθθθ ====∆∆∆∆
Resolving power is
determined by number of
rulings and order of line.
mNR ====
![Page 21: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/21.jpg)
Interference with 3 Slits
Path difference
between rays
from adjacent
slits:
dL
dL
/
sin
∆∆∆∆≈≈≈≈
====∆∆∆∆
θθθθθθθθ
Phase difference between
rays from adjacent slits:
λλλλθθθθ
ππππλλλλ
ππππφφφφdL
22 ====∆∆∆∆
====
Get intensity from
phasor diagram:
![Page 22: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/22.jpg)
3 Slits Continued
1. Central maximum:
00 93
00
IIEE TT ========
======== θθθθφφφφ
2. First minimum:
φφφφ = 120°
00
3sin
3
2
========
========
TT IE
dλλλλ
θθθθππππ
φφφφ
3. Next maximum:
00
2/sin
IIEE
d
TT ========
======== λλλλθθθθππππφφφφφφφφ = 180°
![Page 23: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/23.jpg)
3 Slits Continued
4. Next minimum:
φφφφ = 240° 00
3
2sin2
3
2
========
========
TT IE
d λλλλθθθθππππφφφφ
5. Next maximum:
d
IIEE
d
TT
/
93
sin2
00
λλλλθθθθ
λλλλθθθθππππφφφφ
≈≈≈≈
========
========
φφφφ = 360°
![Page 24: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/24.jpg)
09I
0I
λλλλλλλλλλλλλλλλ3
2
230====∆∆∆∆LdL /∆∆∆∆≈≈≈≈θθθθ dm /max λλλλθθθθ ≈≈≈≈
Summary
![Page 25: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/25.jpg)
Note we still have dm /max λλλλθθθθ ====But more slits makes the peaks sharper.
Five Slits
For many slits, we get a diffraction grating.
����
![Page 26: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/26.jpg)
Diffraction
Grating
![Page 27: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/27.jpg)
Wavelength Resolution of a Grating
![Page 28: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/28.jpg)
Width of
sharp lines
![Page 29: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/29.jpg)
Resolving PowerPositions of maximums: λθ md =sin
mNR ====Resolving power definition:
λλλλλλλλ∆∆∆∆
====R
Widths of sharp maximums: Nd/λλλλθθθθ ====∆∆∆∆Wavelengths just resolved:
Nm
Nddm
/
//
λλλλλλλλλλλλλλλλ
====∆∆∆∆
====∆∆∆∆
Small angles:
dm
dm
/
/
λλλλθθθθλλλλθθθθ∆∆∆∆====∆∆∆∆
====
So we get:
![Page 30: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/30.jpg)
Example: Yellow sodium vapor lines
Problem 36-50
The strong yellow lines in the sodium spectrum are at
wavelengths 589.0 nm and 589.6 nm.
How many rulings are needed in a diffraction grating to
resolve these lines in second order?
9826.0
589========
∆∆∆∆====
nm
nmR
λλλλλλλλ
We need
mNR ====But so 4912
982============
m
RN
![Page 31: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/31.jpg)
Diffraction II
• Today– Single-slit diffraction review
– Multiple slit diffraction review
– Xray diffraction
– Diffraction intensities
![Page 32: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/32.jpg)
Review: Double Slit
Path Differences
For point P at angle θθθθ triangle
shows θθθθsindL ====∆∆∆∆For constructive interference
we need λλλλmL ====∆∆∆∆
So the bright fringes are at
angles given byλλλλθθθθ md ====sin
where m=0,1,2,… is any integer.
![Page 33: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/33.jpg)
Double-slit interference fringes
So the bright fringes
are at angles given byλλλλθθθθ md ====sin
And the dark fringes
are at angles given by λλλλθθθθ )(sin2
1++++==== md
![Page 34: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/34.jpg)
Single slit: Pattern on screen
Bright and dark fringes appear behind a single very thin slit.
As the slit is made narrower the pattern of fringes becomes wider.
![Page 35: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/35.jpg)
Dark Fringes
in Diffraction
![Page 36: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/36.jpg)
Single Slit dark
fringes
Destructive interference:
(((( )))) (((( ))))2/sin2/ λλλλθθθθ ====ma
λλλλθθθθ ma ====sin
Don’t confuse this with the
condition for constructive
interference for two slits!
In fact, note that there is a dark fringe when the rays
from the top and bottom interfere constructively!
![Page 37: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/37.jpg)
Summary of single-slit diffraction
• Given light of wavelength λ passing through a slit of width a.
• There are dark fringes (diffraction minima) at angles θ given by a sin θ = mλ where m is an integer.
• Note this exactly the condition for constructiveinterference between the rays from the top and bottom of the slit.
• Also note the pattern gets wider as the slit gets narrower.
• The bright fringes are roughly half-way between the dark fringes. (Not exactly but close enough.)
![Page 38: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/38.jpg)
Example: Problem 36-6The distance between the first and fifth minima of a single-
slit diffraction pattern is 0.35 mm with the screen 40 cm
away from the slit, with light of wavelength 550 nm.
Find the slit width. Dy /tansin ====≈≈≈≈ θθθθθθθθ
a
DDDyy
aaa
amma
λλλλθθθθθθθθ
λλλλλλλλλλλλθθθθθθθθ
λλλλθθθθλλλλθθθθ
4sinsin
415sinsin
/sinsin
1515
15
====−−−−====−−−−
====−−−−====−−−−
========
mmm
yy
Da
5.2105.2
105.3
4.01055044
3
4
9
15
====××××====
××××××××××××××××
====−−−−
====
−−−−
−−−−
−−−−λλλλ
![Page 39: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/39.jpg)
Q.36-1
A slit of width 50 µm is used
with monochromatic light to form a
diffraction pattern. The distance between
dark fringes on a distant screen is 4 mm. If
the slit width is increased to 100 µm, what
will be the new distance between dark
fringes?
Give your answer in mm. (In the range 0-9.)
![Page 40: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/40.jpg)
Q.36-1A slit of width 50 µm is used
with monochromatic light to form a
diffraction pattern. The distance between
dark fringes on a distant screen is 4 mm. If
the slit width is increased to 100 µm, what
will be the new distance between dark
fringes?
Pattern size is inversely proportional to slit
size: 2 times slit width means (1/2) times the
distance between fringes. Answer: 2 mm.
![Page 41: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/41.jpg)
Multiple-Slit Diffraction
Now we can finally put together our
interference and diffraction results to see
what really happens with two or more slits.
RESULT: We get the two-slit (or multiple-slit)
pattern as in chapter 35, but modified by the
single-slit intensity as an envelope.
Instead of all peaks being of the same
height, they get weaker at larger angles.
![Page 42: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/42.jpg)
Double-Slit
Diffraction
a = slit width
d = slit separation
θθθθ = angle on screen
Bright fringes due to 2-slit
interference: dm /λλλλθθθθ ====
L,/2,/ aa λλλλλλλλθθθθ ====Zero due to diffraction:
![Page 43: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/43.jpg)
Double-slit diffraction
2 slits of zero width
1 slit of width a = 5λλλλ
2 slits of width a = 5λλλλ
![Page 44: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/44.jpg)
Two-slit and one-slit patterns
(Figure 36-15 from text page 1003.)
Actual photograph:
(a)= two slits
(b)=one list covered
![Page 45: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/45.jpg)
Scaling of diffraction patterns
Notice a common feature of interference
and diffraction patterns: The large-scale
features of the pattern are determined by
the small-scale regularities of the object,
and vice-versa.
Holograms and X-ray diffraction patterns are examples.
![Page 46: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/46.jpg)
Example:Sample Problem 36-5
Two slits: d=19.44 nm, a=4.05 µm, λ=405 nm.
(a)How many bright
fringes within the
central peak?
(b)How many in the
first side peak?
![Page 47: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/47.jpg)
Example:Sample Problem 36-5
Two slits: d=19.44 nm,
a=4.05 µm, λ=405 nm.
Solution:
Two-slit:
L,1250.,1042.,0833.,0625.,0416.,0208.
02083./
====
======== mdmλλλλθθθθ
One-slit:
L,04.,30.,20.,10.
/
====
==== amλλλλθθθθ
![Page 48: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/48.jpg)
Q.36-2 When red laser light is
diffracted by two slits of equal width, there are
many closely spaced bands of light inside wider
bands. What features of the slits determine the
separation x between the closely-spaced bands?
x
(1) Width of the individual slits.
(2) Distance between the two slits.
(3) Ratio of distance to width.
(4) None of the above: it’s more complicated.
![Page 49: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/49.jpg)
Q.36-2 When red laser light is
diffracted by two slits of equal width, there are
many closely spaced bands of light inside wider
bands. What features of the slits determine the
separation x between the closely-spaced bands?
x
(1) Width of the individual slits.
(2) Distance between the two slits.
(3) Ratio of distance to width.
(4) None of the above: it’s more complicated.
![Page 50: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/50.jpg)
X-Rays
•X-rays are just light waves with shorter
wavelengths and higher photon energies.
•Since X-ray wavelengths are comparable to
atomic sizes, they are perfect for studying atoms
and the arrangement of atoms in crystals.
![Page 51: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/51.jpg)
X-Rays and Crystals
λλλλθθθθ md ====sin2
Bragg condition
for a bright spot:
A crystal surface
acts like a
diffraction grating
for X rays.
![Page 52: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/52.jpg)
X-ray crystallogrphy
In this way, using xrays of known
wavelength we can measure the
distances between atoms in a
crystal and determine the crystal
structure.
![Page 53: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/53.jpg)
Single-slit Intensity
•We know where to find the dark fringes in the
single-slit pattern. But can we calculate the
actual intensity at a general point?
•Yes, using the phasor method.
•Book gives result on page 998:2
sin
====ααααααααθθθθ
mI
I
Here Iθ is the intensity at angle θ on the screen.
Im is the intensity at the central maximum.
The angle α= φ /2, and φ is the phase difference
between the rays from top and bottom of slit.
![Page 54: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/54.jpg)
Phasors for Single SlitBreak up the slit into many tiny zones, giving many
rays of light, which come together on the screen.
=mE Amplitude at center = Sum of all phasors
=θE Amplitude at angle θθθθ, get from diagram
=∆φ Phase difference between adjacent rays
=φ Phase difference between top and bottom rays
![Page 55: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/55.jpg)
First Maximum and Minimum
mEE ====
====
θθθθ
φφφφ 0
)sin(2
θθθθφφφφλλλλ
ππππa
====Remember of course
the relation between
phase difference and
path difference
λλλλθθθθππππφφφφ
θθθθ
ma
m
E
====
====
====
sin
)2(
0
![Page 56: The single slit, diffraction](https://reader030.vdocuments.us/reader030/viewer/2022020119/5869065f1a28ab3f7c8b9653/html5/thumbnails/56.jpg)
Intensity for Single Slit
φφφφREm ==== )2/sin(2 φφφφθθθθ RE ====
φφφφφφφφθθθθ )2/sin(2
====mE
E
2
2)2/(sin4
φφφφφφφφθθθθ ====
mI
I
2sin
====ααααααααθθθθ
mI
I
Which gives the textbook
result: