![Page 1: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/1.jpg)
The FCC Certification Process:
Going Wireless
![Page 2: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/2.jpg)
Many manufacturers hesitate to use wireless features because of the
uncertainty of the certification process.
![Page 3: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/3.jpg)
But we are here to tell you that the certification
process for the United States is really not as bad
as it seems.
![Page 4: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/4.jpg)
The Federal Communications Commission (FCC) • The FCC regulates radio frequencies in the U.S.
• They make sure wireless broadcasters can share the wireless
spectrum without interfering with each other.
• They require that any device that radiates RF energy to be
tested for compliance with the FCC rules
![Page 5: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/5.jpg)
Licensed Broadcasts
Some broadcasters are licensed to broadcast on a specific spectrum,
such as a radio station. A radio station can be licensed to operate at
100.3MHz in a region and the FCC regulations prevent someone else
from using that spectrum.
Unlicensed Broadcasts
The FCC allows unlicensed broadcasts as well subject to regulations to
prevent interference. The FCC rules for unlicensed broadcasting from
below 1MHz in excess of 32GHz are included in CFR 47 Part 15.
Licensed & Unlicensed Broadcasts
![Page 6: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/6.jpg)
• The FCC requires any device that radiates RF energy to be tested
for compliance with the FCC rules.
• Part 15 - deals with the operational aspects and requirements for
devices that emit RF energy and are to be operated without the end
user needing a license
• Part 2 - deals with issues of marketing and authorization and
includes details on the certification and approval process
FCC Compliance
![Page 7: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/7.jpg)
The 8 Step FCC Certification
Process
![Page 8: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/8.jpg)
• Have a clear understanding of which frequencies are legally
available
• Choose a specific frequency based on technical issues (ex: range,
propagation, antenna length, power consumption and potential
interference)
1. Choose the Optimum Operating Frequency
![Page 9: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/9.jpg)
• The RF section and antenna must be carefully designed and
optimized to comply with the allowed power and harmonic limitations
imposed by Part 15
• If you are using a Linx module this is much easier to do
• Important to recognize that antenna and layout play key roles in your
product’s legal operation
2. Component Selection
![Page 10: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/10.jpg)
• Once you’ve selected a frequency of operation and a suitable RF
stage you will want to move from concept breadboard prototypes to a
production-ready model as soon as you can
3. Build Production-Ready Prototypes
![Page 11: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/11.jpg)
• When your wireless product is finished, output power and harmonics
should be checked to ensure that the RF stage is both optimized and
Part 15 compliant.
• Do this with a spectrum analyzer and calibrated antennas
• Consider prescreening if you don’t have access to the above
instruments
• Linx partners with a test lab that offers these services at a
discount to Linx customers
• The process can result in a cost savings over formal testing and
provides an opportunity to maximize product performance
4. Prescreen and Optimize
![Page 12: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/12.jpg)
• The FCC requires that final product testing be conducted by a
registered testing facility
• A list of registered, independent testing facilities is on the FCC
website
• Quality and competence of labs varies widely
• Linx is happy to recommend competent facilities
• Once you pick a lab, determine the extent of services they’ll provide
• Our advice? Have them do as much as possible.
• Taking time to understand the subtleties of the filing process in
the middle of trying to get a product to market is a bad idea.
Saving a few bucks to do things yourself may end up costing
more in the end, and could jeopardize the approval.
5. Lab Selection
![Page 13: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/13.jpg)
• A Federal Registration Number (FRN) must be obtained when your
product is complete and ready for testing
• This is free and can be obtained in a few minutes on the FCC
website
• Request a grantee code from the FCC (also can be done online)
• $60 and must be paid within 30 days of the application
6. Registering
![Page 14: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/14.jpg)
• Once product is in finished form testing should be performed by an
accredited laboratory (not necessary to be present)
• Testing usually takes less than two weeks depending on lab’s
schedule
7. Send the Production-Ready Prototype to an FCC Authorized
Testing Facility
![Page 15: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/15.jpg)
• A letter appointing the test lab as your technical agent for certification
• The FCC ID Number of the unit.
• The first 3 or 5 numbers are the grantee code. The rest is up to
the applicant, up to 14 characters
• A sketch of the FCC label and the location on the unit
• A block diagram of the unit showing all clock oscillators and their
frequencies of operation
• Full schematic diagram
• The user’s manual
• A brief, non-technical description of the product and its operation
• A product sample for testing and photos
Items Needed to Complete Filing
![Page 16: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/16.jpg)
• Independent testing laboratories are now allowed to issue
certifications through the Telecommunication Certification Body
(TCB) program
• Filing process usually done through test lab
• The TCB will review all application materials and if the device
conforms to the requirements, they will upload this info to the FCC
• The FCC will add the product and the ID number to their database
and website, and issue a Grant of Equipment Authorization
• At this point, the product can be legally marketed and sold
8. The Filing Process
![Page 17: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/17.jpg)
International Considerations
![Page 18: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/18.jpg)
• The process and cost varies widely
• Ex: The requirements for Industry Canada (IC) are close to the
U.S., so adding a Canadian certification is generally not much
more expensive than the U.S. alone
• Ex: The European Union has harmonized requirements across
all European countries but the test requirements are much more
involved than for the U.S. which means more money
• Most countries follow the same rules as either Europe or the U.S.
• Many countries require testing to be done in their country and all
require a representative within the country as a point of contact
• Become aware of the requirements of each country before you
market your product
International Certification Info
![Page 19: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/19.jpg)
Modular Certification
![Page 20: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/20.jpg)
• The FCC has made an allowance for modular certification
• A radio module can be tested for compliance with the rules, then
included in multiple end products without having to undergo the
full amount of testing
• This can save time and money but comes with a number of
requirements from the module
• The designer integrating the module into an end product also
has requirements (ex: using the same antenna that was tested
with the module)
• There is no modular certification for the receiver
• The transmitter needs to be certified and the receiver needs
to be tested in the end product
Modular Certification
![Page 21: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/21.jpg)
In Conclusion
![Page 22: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/22.jpg)
• As the number of wireless products has grown the process for
certification ahs become much more streamlined
• In you have any concerns or questions…
• You can contact Linx Technologies and speak with an
applications engineer
• You can contact a test lab
In Conclusion
![Page 23: The FCC Certification Process: Going Wireless](https://reader034.vdocuments.us/reader034/viewer/2022042815/558298b0d8b42a94688b484c/html5/thumbnails/23.jpg)
Enjoy the show?
Follow our blog for
more RF info!
CLICK TO SUBSCRIBE! http://www.linxtechnologies.com/blog