• The Task Force Blitzfire is a personal portable monitor (PPM) capable of flows of 500+ GPM and is easily deployed by one firefighter.
• It is supplied by a single 2 ½” hose, can be pre-connected to the apparatus, and can be mounted on the exterior of the rig for rapid deployment.
• The design of the inlet and the discharge neck creates a downward pressure that adds stability to the Blitzfire.
• The operating handle has a ratchet feature that allows for partial opening of the monitor.
• Pull the handle lock outward and pull the handle towards you.
• It has a safety feature that shuts off the monitor when a sudden force (in excess of) 1G is introduced.
• Hydraulic dampening in the handle prevents water hammer in the Blitzfire.
Not for extending lines
• Because of the automatic shut-off feature, you should NOT extend hose lines from the Blitzfire.
• Any force greater than 1 G will automatically shut the Blitzfire down:
– Laterally– From the top– Blunt force– Water hammer (from the
pump side)
Any of these will trip this feature.
Discharge pressures with solid tip
• 100 feet of 2 ½”
100 PSI = 400 GPM125 PSI = 450 GPM150 PSI = 500 GPM
Fog tip settings
• The fog tip has two settings:– Low Pressure (55 PSI)– Standard (100 PSI)
Can also be adjusted to straight stream, fog, or flush.