Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
1
TF-Q Serial Video control card settings steps
(Based on software version 2.86.0)
(TF-QA1,TF-QC1,TF-QC3,TF-QS5)Control cardmust be connected with computer
After installed the software “PowerLED” please open the software.
Select your language in the software.
a) After connected control card with computer,click“search”,If you search successful,you will see the IP of the control card.If you search failed,please check your connection,or check your computerIP(usually we set the computer IP as Automatic obtain).
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
2
b) Open the tool→panel setup(pass word:168)
And set your control card name, select your screen or module color,and set your screenwidth and height (pixels).
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
3
And then open scan setup:
If you know your screen module scan type and have this scan type file,you can“Import” this file to our software.if you had set this screen last time,the software canget your scan type record,you select the scan which one you set last time.About “Usb scan point”,this function only for USB video control card(such asTF-QS1)please find another document refrence to this USB function.Please click”Smart scan” to enter the scan settings:
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
4
(if you are the first time set this screen)
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
5
You can look at the module,when you click A and B,the module is light on or off?Please select in the “show state” ,and after do that,please click “next”
For example,
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
6
When select A,the module display when select B,the module display
So you can select “A on B off” in the “show state”.Please click next.
For example,
When select A,the module is a little dark when select B,the module is brigher
So,you need select “B is brighter than A “in the “show state”Please click “next”.
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
7
For example,
When select A,the module display
When select B,the module display
When select C,the module displayThat the color you need select behind the A B CA=red B= green C=blue
Please click “next”
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
8
At this time,the module display as pictureThere are 16 lines that are lightin,so you select 16
Please click “next”
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
9
At this time,the module display as pictureThere are 16 lines that are lightin,so you select 1
Please click “next”
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
10
Please check the module,the module width is 64 pixels,but I had wrote 32 pixelspreviously
At this time,we can see that,count from the right of the module,the 32nd lamp is lighting
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
11
as this picture,
So we click here like the picture as below:( Row 1, column 1)
here will display 1,when you
click
at this time,the second lampis lighting,and we click here ,picture as below:( Row 1, column 2)
please follow this method, step by step,picture as below:
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
12
after the 1st line lamps all linghting
the next lightinglamp is “Row 2, column 1” please select as below :
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
13
Module display as below:
Lighting all lamps as the following picture:
16 lines lamps alllighting
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
14
Please click OK.(you can change the scan name,if you want)After that ,the module will display normal,picture as below:
That means that this module smart scan sttings successful,and othermodule smart scan settings are all doing like that.
pls select the scan type(which you just test)And click”panel setup.
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
15
Click OK and close this window:
Open tool—panel setup(password168) to check the screen size is rightor not
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
16
If it is right,please click panel setup,and close this window.
Now add the programs:
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
17
Select the video to add.
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
18
All steps are done.At last,please keep the software saved this screen parameter.you can do like that, “saveproject”or”save as”
Shenzhen LongGreat Electronic Teachnology Co.,LtdHenry Chu mobile:+86 15323850528www.LED595.com www.TF-TOP.com
19
If you have any problems,please contact::Henry chuMobile:+8615323850528Email:[email protected]:2402763204Wechat:henrychu520We will offer you better solution and service.