Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
GN ReSound as Global Technical Operations
gto.gnresound.comLautrupbjerg 7-11 • DK-2750 Ballerup • Denmark
Phone: + 45 45 75 23 16 • �-mail: �ervice�gnresound.dk�-mail: �ervice�gnresound.dk
Technical Manual Pixel Mini BTE PL60-DI
Table of contents
Subject Page Diagram - Dual mic. ..............................................................................................3 Part List - Accessories...........................................................................................4 Part List - �xploded view.......................................................................................5 Part List ............................................................................................................6-11 Mount thin Tube ...................................................................................................12 Disassemble Device............................................................................................13 �xchange microphones................................................................................. 14-15
�ervice tool..........................................................................................................16 Test.................................................................................................................17-19
Page 2 of 19
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
Diagram - Dual mic.
Page 3 of 19
Page 4 of 19
Part List - Accessories
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H11
H12
H13
H14
H15
H16
H17
H18
H19
H1
C2 Hy brid
R1
220K
R2 220K
C1
22nF
1
2
3M1
Microphone
1
2
3
M2
Microphone
S1
PB95
1H16
VBat
1H15
GND
1H14
RECN
1H13
RECP1
H5TC1
1H6
TC2
1TP1
VBat
1H7
AUX
1H18
AGND
Telecoil
1.3V
Audioboot
Reciever
H7
VBAT
GND
H14
H13
Vreg
H2
AGND
Vreg
H4
AGND
H5
H6
DAI SIG1
2 3
4
JP1
CS44
H8
H9
GNDH
10
VBATAGNDVreg
VBAT
Accessories : Part No.AI - shoe 15345100
Hook, adult (5 pcs) 15466000
Hook, cosmetic (5 pcs) 15466100
Hook, baby (5 pcs) 15466200
Filter for hook (4 pcs) 15322100
Spectacle adaptors w / filter 15468600
Colour marker kit 15465800
Pin removal tool 15492900
HI - PRO cable C�44, Left 9022 907 69029
HI - PRO cable C�44, Right 9022 907 69019
�ervice tool 15506400
Open adapter 15574500
Cross device 15822702
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
Page 5 of 19
Part List
Part List - Exploded view
Page 6 of 19
Housing body
Housing coverLocking pins
Mechanical module
Batt. doorColour marker
Hook
Filter Frame
Rec susp. Receiver
AI-module
Mu-metal
Tolerance fillerFrame lock
Batt. springs
Front mic.
Back mic.
�uspensions
Hybrid
(Shown in 2 mic. version)
Child lock
Item Part No.Mechanical module 15465900
Telecoil 15065200
Programming socket 15443900
Push-button 15372400
Foam Pad 15554400
Mu-metal 15343900
Front mic (same for single mic version) 2025801
Front susp. (same for single mic version) 15343400
Back mic 15346800
Back suspension 15343500
Receiver complete 15465600
Receiver 15167500
Receiver suspension 15343600
Wire, green 15 mm 15129815
Wire, red 16 mm 15129616
Battery springs kit 15465700
Locking pin 7.1 15344100
Locking pin 5.9 15344200
Locking pin 6.6 15344300
Locking pin 7.8 15344400
Frame lock 15414400 Dual mic.
Item Part No.�ervice PCB 2 mic,Platin 15799900
�ervice PCB 2 mic,Light blond 15799901
�ervice PCB 2 mic,Medium blond 15799902
�ervice PCB 2 mic,Dark blond 15799903
�ervice PCB 2 mic,Dark brown 15799904
�ervice PCB 2 mic, Beige 15799905
�ervice PCB 2 mic,Anthracite 15799906
�ervice PCB 2 mic,Marble grey 15799907
�ervice PCB 2 mic,Black 15799908
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
Item Part No.Battery door:
Platin 15716400
Light blond 15716401
Medium blond 15716402
Dark blond 15716403
Dark brown 15716404
Beige 15716405
Anthracite 15716406
Marble grey 15716407
Black 15716408
Battery door lock:
Platin 15342705
Light blond 15342701
Medium blond 15342702
Dark blond 15342708
Dark brown 15342703
Beige 15342700
Anthracite 15342704
Marble grey 15342711
Black 15342712
Part List
Page 8 of 19
Part List
Page 7 of 19
Dual mic.
Housing body
Housing cover complete*
*Cover for connector C� 44 is glued to the housing.
Item Part No.AI - module:
Platin 15341805
Light blond 15341801
Medium blond 15341802
Dark blond 15341808
Dark brown 15341803
Beige 15341800
Anthracite 15341804
Marble grey 15341811
Black 15341812
Frame:
Platin 15342405
Light blond 15342401
Medium blond 15342402
Dark blond 15342408
Dark brown 15342403
Beige 15342400
Anthracite 15342404
Grey1 15342411
Black 15342412
Dual mic. version : PL60-DI Part No.Housing body, printed:
PL60-DI,Platin 15706300
PL60-DI,Light blond 15706301
PL60-DI,Medium blond 15706302
PL60-DI,Dark blond 15706303
PL60-DI,Dark brown 15706304
PL60-DI,Beige 15706305
PL60-DI,Anthracite 15706306
PL60-DI,Marble grey 15706307
PL60-DI,Black 15706308
PL60-DI,Metallic 15706309
Dual mic. version : PL60-DI Part No.Housing cover, complete:
PL60-DI,Platin 15465205
PL60-DI,Light blond 15465201
PL60-DI,Medium blond 15465202
PL60-DI,Dark blond 15465208
PL60-DI,Dark brown 15465203
PL60-DI,Beige 15465200
PL60-DI,Anthracite 15465204
PL60-DI,Marble grey 15465211
PL60-DI,Black 15465212
Push-button cap:
PL60-DI,Platin 15342905
PL60-DI,Light blond 15342906
PL60-DI,Medium blond 15342907
PL60-DI,Dark blond 15342908
PL60-DI,Dark brown 15342909
PL60-DI,Beige 15342900
PL60-DI,Anthracite 15342910
PL60-DI,Marble grey 15342911
PL60-DI,Black 15342912
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
Part List
Page 10 of 19
Part List
Page 9 of 19
Kit accessories Part No.Blister pack, 5 Tulip-dome 15477700
Tulip dome (25 pcs) 15780700
Blisterpack, dome 10 15276400
Blisterpack, dome 5 15276500
Blisterpack, dome 7 15276300
GNR 60 Mini blister pack 0A/L 15758700
GNR 60 Mini blister pack 0A/R 15757900
GNR 60 Mini blister pack 0B/L 15758600
GNR 60 Mini blister pack 0B/R 15757800
GNR 60 Mini blister pack 1A/L 15758500
GNR 60 Mini blister pack 1A/R 15757700
GNR 60 Mini blister pack 1B/L 15758400
GNR 60 Mini blister pack 1B/R 15757600
GNR 60 Mini blister pack 2A/L 15758300
GNR 60 Mini blister pack 2A/R 15757500
MiniDome �tandard Dome
Dual mic. version : PL60-DI Part No.HI complete:
PL60-DI,Platin 15706000
PL60-DI,Light blond 15706001
PL60-DI,Medium blond 15706002
PL60-DI,Dark blond 15706003
PL60-DI,Dark brown 15706004
PL60-DI,Beige 15706005
PL60-DI,Anthracite 15706006
PL60-DI,Marble grey 15706007
PL60-DI,Black 15706008
PL60-DI,Metallic/ Anthracite 15706009
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
Kit accessories Part No.GNR 60 Mini blister pack 2B/L 15758200
GNR 60 Mini blister pack 2B/R 15757400
GNR 60 Mini blister pack 3A/L 15758100
GNR 60 Mini blister pack 3A/R 15757300
GNR 60 Mini blister pack 3B/L 15758000
GNR 60 Mini blister pack 3B/R 15757200
GNR 60 Mini thin tube earbox 15756700
Part List
Page 12 of 19
Mount thin Tubes
Page 11 of 19
Press out the locking pin using pin removal tool. Remove pin with a pair of tongs or tweezers.
Remove the hook. Attach the thin tube and insert the locking pin again.
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
Disassemble Device
Exchange microphones
Page 13 of 19
Page 14 of 19
Press out the locking pins. Remove tone tube and frame lock.
�eperate body from electronic part.
Press out the locking pin. �eperate electronic module and electronic housing.
�lectronic module.
Pin 6,6 mm.
Pin 7,8 mm.
Frame lock.
Pin 5,9 mm.
For reference is shown a dual microphone version. For single microphone follow the same procedure.
Place frame and PCB in jig as shown on the picture. Unsolder and remove microphone(s).
Flip back PCB and remove micro-phone suspensions.
Insert new microphone(s) in the jig. �nsure the Microphones are seated correctly in the jig.
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
Exchange microphones
Page 15 of 19
Page 16 of 19
Service tool
Attach foam pad to rear microphone p/n 15554400 (dual microphone ver-sion only).�nsure the foam pad does not overlap the solder-points.
Place frame and PCB in the jig �nsure the PCB is correctly aligned with the Microphone pads, and ap-ply a small quantity of solder on the microphone(s) pads (if needed).Coat solder-points with KR112.
Reattach microphone suspen-sions and re-assemble the device.
�ervice tool p/n 15506400
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
-IN
Page 18 of 19
Test
Test
Page 17 of 19
Half shell
Low Profile
The BTE fixture consists of two parts, a test frame and an instrument holder. Each part has its own part number and they areavailable from GN Otometrics in Taastrup.
Test tubing is normal 20 mm effective lenghtas for all AUDIOmaster BT� testing.
Instrument holderp/n 1-21-69200
Test framep/n 1-21-65900
20 mm
Use of the test fixture is mandatory for all PL60 duringAUDIOmaster testing. To use the fixture, place the instrumentunder test in the fixture according to the picture. Connect theprogramming cable and select PL60 test program in AUDIO-master. During the test program execution the IAD calibrationwill be performed at the appropriate time. Another bennefitfrom the fixture is that the instrument is in a well defined possition so the telecoil test can be performed without anyenteraction from the operator.
Instrument holderp/n 1-21-69200
Doc No. 0099170 rev. A
Doc No. 0099170 rev. A
Testing PL60-DI
Page 19 of 19
Page 16 of 16
Test PL60-D device by following the simple steps below:
1. Store the fitting settings in Aventa.
2. �xchange PL60-DI tube with standard hook.
3. Run the device through AUDIOmaster system using the test fixtures and standard PL60-DI TPI.
4. Attach PL60-DI tube again.
5. Reconfigure device to PL60-DI in Aventa. 6. Restore fitting settings.