Transcript
19215 Redwood Road • Cleveland, OH 44110 • 800-321-7628 www.euclidchemical.com
The Euclid Chemical Company
STANDARD FLOOR JOINT FILLING DETAILS
TECHNICAL BULLETIN CP-27
The details below comply with both American Concrete lnstitute (ACI) and Portland Cement Association
(PCA) guidelines for the installation of a semi-rigid epoxy or polyurea floor joint filler.
Saw Cut Joint Less Than 2” (50 mm) Deep Saw Cut Joint More Than 2” (50 mm Deep)
Saw Cut Construction Joint Construction Joint Not Saw Cut
1/4” (6 mm) Max.Silica Sand orNo Silica Sand
Compressible Backer Rod or Silica Sand
2” (50 mm) Min.
Silica Sand HeldBelow the Saw Cut
Compressible Backer Rod or Silica Sand
2” (50 mm) Min.
