Download - TankJet Tank Cleaning Products, Catalog 15
Experts in Spray TechnologySpray
NozzlesSpray
ControlSpray
AnalysisSpray
Fabrication
TankJet® Tank Cleaning Products
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Optimizing Tank Cleaning Operations
Optimizing Tank Cleaning OperationsChoosing the best way to thoroughly clean your tanks while minimizing use of costly chemicals, water and manual labor can be challenging. There are several things you can do to maximize the performance of your tank cleaning equipment. We’ve included optimization tips and guidelines in this bulletin to help you achieve optimal cleaning efficiency.
GeTTinG STarTed
If you are cleaning your tanks manually
Changing to an automated method will yield many benefits:
• More consistent, thorough cleaning
• Improved worker safety by removing contact with hazardous chemicals
• Faster cleaning – downtime is minimized and tanks are returned to service more quickly
• Reduced use of water, chemicals and lower wastewater disposal costs
• Workers can be deployed to other tasks
If you are currently using tank cleaning nozzles or a tank cleaning machine
You may be able to improve cleaning efficiency by making some simple changes or using different equipment. Technology advancements have made it easier to remove stubborn residues, shorten cleaning cycle times and achieve higher levels of automation.
The first step to optimizing tank cleaning is to audit your operations.
• How many tanks require cleaning and what is the diameter, length and height of each?
• Are there obstructions in your tanks such as agitators or mixers?
• Are there certain areas that need more cleaning than others such as skim lines?
• What residue needs to be removed? Is it sticky? Or is it easily rinsed away?
• Are cleaning agents required or is water sufficient? Is it necessary to heat the cleaning liquid?
• What problems are you experiencing with your current cleaning method?
Equipped with the answers to these questions, you should be ready to start evaluating your options.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Optimizing Tank Cleaning Operations
SeleCTinG The riGhT equipmenTThe chart below shows all of our tank cleaning products and the maximum tank diameter each unit can clean. The maximum tank diameter is defined as the total distance the spray can travel to tank walls assuming the unit is positioned in the center of the tank. The closer the nozzle is to the tank wall, the greater the impact. The chart also shows recommended minimum tank diameters. It is possible to use some tank cleaners in smaller tanks than recommended, but consider the size of the unit and the liquid volumes.
Maximum Tank Diameter
Feet 0.5 1 2 3 4 5 6 7 8 9 10 12 14 16 18 20 30 40 50 60 70 80 90 100
Meters 0.2 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 3.7 4.3 4.9 5.5 6.1 9.1 12 15 18 21 24 27 30
TankJet® 360/363
TankJet 180
TankJet AA290
TankJet AA190-HP5
TankJet 80
TankJet 65
TankJet AA190 and AA190H
TankJet 75
TankJet 27500 and 27500R
TankJet 12900
TankJet D26984
TankJet D40159
TankJet 28500 and 28500R
TankJet 63225
TankJet D41800E
TankJet 6353 and 6353-MFP
TankJet AA090
TankJet 18250A
TankJet 30473
TankJet D41892
TankJet D41990
TankJet 21400A
TankJet VSM
TankJet 23240
TankJet 3150
TankJet 36640
TankJet 15498
High Impact Cleaning
Medium Impact Cleaning
Low Impact Cleaning
Rinsing
up to 100’
up to 80’
up to 80’
up to 80’
up to 50’
up to 40’
up to 34’
up to 30’
up to 25’
up to 22’
up to 20’
up to 20’
up to 18’
up to 13’
up to 12’
up to 10’
up to 8’
up to 8’
up to 8’
up to 6.5’
up to 6.5’
up to 5’
up to 5’
up to 3’
up to 3’
up to 3’
up to 2’
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Optimizing Tank Cleaning Operations
SeleCTinG The riGhT equipmenTThe chart below shows all of our tank cleaning products and the maximum tank diameter each unit can clean. The maximum tank diameter is defined as the total distance the spray can travel to tank walls assuming the unit is positioned in the center of the tank. The closer the nozzle is to the tank wall, the greater the impact. The chart also shows recommended minimum tank diameters. It is possible to use some tank cleaners in smaller tanks than recommended, but consider the size of the unit and the liquid volumes.
Maximum Tank Diameter
Feet 0.5 1 2 3 4 5 6 7 8 9 10 12 14 16 18 20 30 40 50 60 70 80 90 100
Meters 0.2 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3 3.7 4.3 4.9 5.5 6.1 9.1 12 15 18 21 24 27 30
TankJet® 360/363
TankJet 180
TankJet AA290
TankJet AA190-HP5
TankJet 80
TankJet 65
TankJet AA190 and AA190H
TankJet 75
TankJet 27500 and 27500R
TankJet 12900
TankJet D26984
TankJet D40159
TankJet 28500 and 28500R
TankJet 63225
TankJet D41800E
TankJet 6353 and 6353-MFP
TankJet AA090
TankJet 18250A
TankJet 30473
TankJet D41892
TankJet D41990
TankJet 21400A
TankJet VSM
TankJet 23240
TankJet 3150
TankJet 36640
TankJet 15498
High Impact Cleaning
Medium Impact Cleaning
Low Impact Cleaning
Rinsing
Comparing the Options
Your final decision will be determined by tank size and level of cleaning required. However, here are a few more things to keep in mind as you work through the selection process:
High impact cleaning is required to remove stubborn residues such as layers of a dried substance. Tank cleaners in this category generally use high pressure and/or high flow and spin at slow rotational speeds to maintain high impact. Solid stream nozzles are used to maximize impact.
Medium impact cleaning is required when good impingement is needed to remove residues. Tank cleaners that provide medium impact generally use solid stream nozzles at medium flows and pressures. Rotational speed is slightly faster than high impact tank cleaners but much slower than free-spinning nozzles to ensure adequate impact on target areas.
Low impact cleaning is used for light cleaning when some impact is required. Low flow/medium pressure and high flow/low pressure nozzles are used to achieve low impact cleaning. These nozzles include rotating flat spray nozzles or stationary full cone types.
Rinsing is used when distributing cleaning solution throughout the tank without impact provides sufficient cleaning. Rinsing nozzles are typically free-spinning or stationary spray balls.
up to 100’
up to 80’
up to 80’
up to 80’
up to 50’
up to 40’
up to 34’
up to 30’
up to 25’
up to 22’
up to 20’
up to 20’
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Optimizing Tank Cleaning Operations
Six Key SpeCifiCaTiOn GuidelineS
Once you’ve determined which type of tank cleaner or nozzles may be suitable, there are a few other factors to evaluate to ensure you’re going to get the cleaning performance you need. Here are a few guidelines to keep in mind as you start to select a specific unit.
Spray distance
Spray distance, sometimes referred to as “throw”, is the distance between the spray exiting the nozzle orifice to the spray hitting the target surface. The spray coming from the nozzle should reach the walls of the tank vessel. Spray that reaches the tank surface may not clean heavily soiled areas. The spray loses impact the farther away it gets from the nozzle. Adequate pressure should be supplied to the nozzle to ensure the cleaning liquid is applied with enough impact to remove the residue.
Spray distance is usually expressed in terms of tank diameter. If your tank is 20 ft. (6 m) in diameter and 40 ft. (12 m) tall, understand that you will need two tank cleaners that can clean 20 ft. (6 m) or one that can clean up to 40 ft. (12 m).
Impact
The characteristics of the residue will determine how much impact is required to remove it. If you’re not sure, ask for assistance. We have impact data available for many products and decades of experience.
Keep in mind that you can increase impact by increasing flow rate or by increasing pressure. Increasing flow rate is far more effective. Doubling flow rate increases impact by as much as 100% while doubling pressure provides a 40% increase. However, the best approach is to select the tank cleaning product that has adequate impact to ensure optimal cleaning efficiency.
Relative Impact
Flow Rate Pressure Relative Impact
13 gpm (50 l/min)
45 psi (3 bar) 1.0
13 gpm (50 l/min)
90 psi (6 bar) 1.4
26 gpm (100 l/min)
45 psi (3 bar) 2.0
Another consideration is the effect of rotational speed on impact. Faster rotational speeds can compromise impact and efficiency. The spray rotates so fast that energy dissipates and the spray pattern deteriorates before it hits the tank surface. In some operations, you may be able to eliminate using hot water by increasing impact. This is dependent on the residue to be removed. Increasing impact instead of heating your cleaning solution can save thousands of dollars annually by decreasing energy costs.
20 ft. (6 m)
20 ft. (6 m)
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Optimizing Tank Cleaning Operations
Full Cone for Low-Impact
Flat Fan for Medium-Impact
Solid Stream for High-Impact
Flow rate
Operating at the lowest possible flow rate will help keep operating costs down. Less liquid, effluent for disposal and energy will be consumed. A general guideline is to use between 0.2 gal/min/ft2 (7 l/min/m2) and 0.4 gal/min/ft2 (15 l/min/m2). This guideline generally applies to stationary nozzles where all the surfaces of the tank are sprayed at the same time. Nozzles that rotate usually contact part of the tank at one time and can operate at lower flows.
Spray pattern
Solid stream sprays provide the greatest impact, followed by flat fan and full cone sprays.
Materials
Most tank cleaning nozzles are constructed of stainless steel because of its durability and resistance to high temperatures. For operations where corrosion is a concern, choose nozzles made of PTFE or PVDF. Make sure units with seals and o-rings are made of materials compatible with the cleaning solution.
Coverage
Spray coverage from tank cleaning nozzles range from 65° to 360°. You may need to use more than one nozzle to reach all areas of the tank especially if there is equipment in the tank such as a mixer or agitator.
Spray coverage
65° 240°
120° 260°
180° 270°
210° 360°
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Optimizing Tank Cleaning Operations
OpTimizinG perfOrmanCe
Keep tank cleaning nozzles and fluid-driven machines free of debris by using strainers
Particulates in the liquid can clog nozzles, stop rotation and cause inadequate cleaning. Filtering the liquid with line strainers can prevent clogging and extend the wear life of downstream equipment.
• For fine straining, woven wire mesh screens provide very small openings to strain particulates down to 200 mesh (74 microns)
• The mesh screen should be made of stainless steel for strength and corrosion resistance
• Be sure to keep an extra screen on hand for every strainer to ensure trouble-free operation
See our bulletin on strainers for recommendations on selecting strainers and mesh.
Ensure proper liquid flow by using lances
If fluid isn’t delivered efficiently and effectively to the tank cleaning device or the nozzle isn’t precisely positioned in the tank, cleaning performance will be compromised.
• Evaluate your lance requirements when specifying your tank cleaner or nozzle. Determine if a standard lance or custom lance is required. Consider a custom lance if you need to position nozzles so the spray impacts directly on heavily soiled areas or skim lines or require special connections, lengths or materials
• Working with a single supplier will ensure compatibility and eliminate connection problems
See our bulletin on lances for more information.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Optimizing Tank Cleaning Operations
Improve cleaning by changing spray head position
Use an adjustable ball fitting to clean vessels in sections. Clean the top half of the vessel; then lower the device and clean the bottom half of the vessel and/or change the angle to clean difficult locations.
Reduce the number of cleaning cycles
Simple adjustments to pressure and flow may enable a reduction in the number of cycles needed for thorough cleaning.
Recirculate and save
Consider recycling your cleaning solution if you aren’t using hazardous materials and your water is free of debris.
Activate cleaning with the flip of a switch
Hard piping your tank cleaner in place can save time and reduce labor costs. Consider permanently installing the device as long as the material or temperature of the material won’t damage the cleaning equipment.
Minimize striping
Motor- and fluid-driven tank cleaners provide 360° coverage. However, the solid stream sprays do not overlap as they rotate so there is a small distance between the sprays. The greater the distance the nozzles are from the tank walls, the greater the distance between the sprays. This distance between the sprays causes a “striping” effect. The best way to minimize striping is to use a three- or four-nozzle hub rather than the standard two-nozzle hub. Striping will be minimized.
Striping effect with two-nozzle hub
Striping effect with four-nozzle hub
Free tank cleaning evaluation
Once you’ve reviewed this bulletin, you should consider taking advantage of our complimentary, on-site tank cleaning evaluation. One of our tank cleaning specialists will visit your plant and observe your operations.
• If tank cleaning nozzles are in use, we will inspect the nozzles and evaluate the type, placement and position
• We will document flow rates, operating pressures, cleaning fluids and residues being removed
• After the evaluation we will provide a written report summarizing your current operations and recommendations to improve cleaning efficiency
Contact your local sales engineer for more information. Call 1.800.95.SPRAY or 1.630.665.5000
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Optimizing Tank Cleaning Operations
abOuT SprayinG SySTemS CO.
Spraying Systems Co. is the world leader in spray technology. It offers the broadest product line in the industry including tank cleaning equipment, spray nozzles, spray controllers, spray injectors and lances and research and testing services. Founded in 1937 in Chicago, Illinois, the company now has 10 manufacturing locations and 90 sales offices around the world.
Spraying Systems Co. recently formed a strategic alliance with Cloud-Sellers, a leader in tank cleaning equipment. The alliance enables Spraying Systems Co. to offer a wider range of products and Cloud-Sellers to benefit from increased distribution.
The Cloud-Sellers products are now branded as part of Spraying Systems Co.’s TankJet® line.
Catalog 15 - Introduction0211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
quick reference Guide
NozzleMax Tank Diameter
ft (m)
Operating Principle
Operating Pressure psi (bar)
Flow Rate Range
gpm (l/min)
Spray Coverage
Min Tank Opening Size
in (mm)
Max Temperature
°F (°C)
TankJet D41800E 12
(3.7)Fluid Driven
Constant Speed30 - 230 (2 - 16)
2.7 - 33 (12 - 128) 360° 1.25
(32)300
(150)
TankJet 6353 &
6353-MFP
10 (3.0)
Fixed Stationary
20 - 50 (1.5 - 3.5)
8.9 - 80 (35 - 301) 360° 6
(152)212
(100)
TankJet AA090
8 (2.4)
Motor Driven 100 - 500 (7 - 35)
1.5 - 7.3 (5.7 - 28) 360° 2.3
(59)200 (93)
TankJet 18250A
Fluid Driven Reactionary
Force
10 - 60 (1 - 4)
10.5 - 55 (48 - 205) 360° 2.22
(60)350
(177)
TankJet 30473
Fluid Driven Reactionary
Force
10 - 50 (0.7 - 4)
2.1 - 4.5 (7.8 - 18)
180° up/down, ~360° 1
(25)200 (93)
TankJet D41892
6.5 (2.0)
Fluid Driven Reactionary
Force
20 - 70 (1.4 - 5)
4.0 - 7.5 (15.9 - 29) 360° 1.5
(37)160 (70)
TankJet D41990
Fluid Driven Reactionary
Force
15 - 60 (1 - 4)
2.5 - 7.3 (9.5 - 28)
180° up/down, 360°
Thread: 1 (25); CIP version:
2 (50)
300 (149)
TankJet 21400A
5 (1.5)
Fluid Driven Reactionary
Force
10 - 60 (1 - 4)
5.0 - 22 (23 - 82) 360° 2.25
(60)350
(177)
TankJet VSM
Fixed Stationary
10 - 150 (0.7 - 10)
2.7 - 72 (10.4 - 269) 240° down 2
(51)200 (93)
TankJet 23240
3 (0.9)
Fluid Driven Reactionary
Force
20 - 200 (1.5 - 12)
3.5 - 22 (14 - 79)
360°, Side Spray
1.03 (26)
350 (177)
TankJet 3150
Fixed Stationary
10 - 150 (1 - 10)
5.2 - 26 (23 - 91) 210°, 360° 2
(51)212
(100)
TankJet 36640
Fluid Driven Reactionary
Force
10 - 60 (1 - 4)
0.8 - 2.2 (3.4 - 7.9) Side Spray 1.03
(26)200 (93)
TankJet 15498
2 (0.6)
Fixed Stationary
60 - 150 (5 - 10)
5.5 - 11.7 (23 - 43) 210°, 360° 2
(51)212
(100)
Catalog 15 - Quick Reference Guide0211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
quick reference Guide
NozzleMax Tank Diameter
ft (m)
Operating Principle
Operating Pressure psi (bar)
Flow Rate Range
gpm (l/min)
Spray Coverage
Min Tank Opening Size
in (mm)
Max Temperature
°F (°C)
TankJet® 360
100 (30)
Fluid Driven Turbine
40 - 350 (2.8 - 24)
30 - 300 (113.5 - 1135.6) 360° 6.25
(158.7)250
(121)
TankJet 180
80 (24.4)
Fluid Driven Turbine
40 - 350 (2.8 - 24)
30 - 300 (113.5 - 1135.6) 180° 12.25
(311) 250
(121)
TankJet AA290
Motor Driven 50 - 250 (3.5 - 17)
22 - 200 (85 - 757) 360°
7.25 (184) for 2 nozzle;
8.25 (210) for 4 nozzle
200 (93)
TankJet AA190-HP5
Motor Driven 500 - 5000 (35 - 350)
4.9 - 65 (18.4 - 246) 360°
3.75 (95) for 2- or
4-nozzle hub
350 (177)
TankJet 80
50 (15.2)
Fluid Driven Turbine
60 - 150 (4.1 - 10.3)
50 - 125 (189 - 473) 360°
6.5 (165) for 2 nozzle;
12.5 (318) for 3 nozzle
250 (121)
TankJet 65
40 (12.2)
Fluid Driven Turbine
50 - 150 (3.4 - 10.3)
30 - 150 (114 - 568) 360° 7.5
(190)
250 (121); 500 (260)
high-temperature
version
TankJet AA190
34 (10.4) Motor Driven 100 - 1000
(7 - 70)3.1 - 44
(11.8 - 170)
180°, 360°
3.75 (95) for 360°;
4.5 (114.3) for 180°
200 (93)
TankJet 75
30 (9.1) Fluid Driven 50 - 300
(3.5 - 20.7)8 - 33
(30 - 125) 360°
3 (76.2) for 2 nozzle; 3.75 (95.2)
for 4 nozzle
350 (121)
TankJet 27500 & 27500R
25 (7.6)
Fluid Driven Reactionary
Force
10 - 50 (0.7 - 3.5)
4 - 391 (15.3 - 1490)
180° up/down, 270° up/down,
360°
2 - 7 (51 - 178)
200 (93)
TankJet 12900
22 (6.7)
Fixed Stationary
20 - 50 (1.5 - 3.5)
72 - 385 (280 - 1470)
360° and custom spray
angles
10 (254)
212 (100)
TankJet D26984 &
D40159
20 (6.0)
Fluid Driven Constant Speed
30 - 230 (2 - 16)
3.2 - 31 (12 - 128)
65° down,120° down,
180° up/down,260° up/down,
360°
2.25 (56)
160 (70)
TankJet 28500 & 28500R
18 (5.5)
Fluid Driven Reactionary
Force
10 - 50 (0.7 - 3.5)
9 - 78 (34 - 295)
180° up/down, 270° up/down,
360°
2.5 - 4 (64 - 102)
200 (93)
TankJet 63225
13 (4)
Fixed Stationary
15 - 40 (1 - 2.8)
22 - 51 (83 - 192) 360° 1.5 - 4
(38 - 102)400
(204)
SolutionS for tankS Up to 100' (30 m) in Dia.
100'(30 m
)tank D
ia.
Spray nozzles
Spray Control
Spray analysis
Spray fabrication
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 360 Fluid driven tank cleaner
TankJet 360 tank cleaner for tanks up to 100’ (30 m) in dia.
TAnkJET® 360 FLuID DRIVEn TAnk CLEAnER
Ideal for Cleaning:• Blenders
• Brewery tanks
• Food processing vats and tanks
• Petrochemical/chemical processing reactors
• Pulp storage chests
• Processing tanks
• Tanker trucks
• Wine vats
Spray Coverage
360°
100' (30 m)tank dia.
High-impact, High-efficiency cleaning for Hard-to-remove residues
Features and Benefits
• Outperforms other fluid driven tank cleaners with more consistent impact over the entire pressure range
• High-impact cleaning results in shorter cycle times so tanks are returned to service more quickly
• nozzles rotate 360° in horizontal and vertical planes creating a crisscrossing pattern to thoroughly clean tanks and remove the stickiest of residues
• Food-grade, oil-lubricated or flow-through gearbox designs
• Choice of dual- or triple-nozzle hubs
• no motors – TankJet 360 tank cleaners are fluid-driven
• Sleek and compact – fits in small tank openings
• Choice of standard clutch version or optional pin version. With clutch version, nozzle hub easily rotates by hand for insertion and removal from tank. Use pin version for permanent or CIP installations. Optional external, self-rinse nozzles available for both pin and clutch versions
• Lightweight for easy portability
• Customizable to your operation. TankJet 360 can be used for high-concentration chemical recirculation cleaning or low pressure, high-volume cleaning. All units are built-to-order
• Built-in strainer minimizes clogging and extends wear life
• user-serviceable for easy maintenance
• For flow rates below 30 gpm (113.5 l/min) use TankJet 363 tank cleaners with low flow patented technology to reduce wastewater costs. Contact your local sales engineer for more information
• Great value – TankJet 360 is competitively priced, provides better performance and comes with the applications expertise and support of the world’s leader in spray technology
Try Before You Buy: Ask About Our Free 15-Day Trial Program
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Specifications
Max. tank dia.: 100’ (30 m)
Flow rate range: 30 to 300 gpm (113.5 to 1135.6 I/min)
Pressure range: 40 to 350 psi (2.8 to 24 bar)
Wash cycle time: 10 to 30 min
Max. operating temp.: 250°F (121°C)
Min. tank opening size:
Dual nozzle: 6.25” (15.9 cm) Triple nozzle: 10.25” (26 cm)
Inlet conn.:
2” nPT (F) with 2-1/2” quick-disconnect (M)
2” nPT (F) with 2-1/2” nST (nH) hose thread (M)
2” BSPT (F) with 2-1/2” quick-disconnect (M)
Materials of construction:
Castings – 316 stainless steel
Gears – 17-4ph stainless steel
O-rings – self-lubricating EPDM or Viton®
Seals – high-performance spring-energized PTFE
Gear shaft bearing system – PTFE or oilite bearing
All other metallurgy – 316 stainless steel
Weight: 25 lbs (11.3 kg)
Viton® is a registered trademark of DuPont Performance Elastomers.
TAnkJET® 360 FLuID DRIVEn TAnk CLEAnER100' (30 m)tank dia.
Catalog 15 - TankJet 360
Dual Nozzle Configuration
Triple Nozzle Configuration
13.3" (338.1 mm)
13.3" (338.1 mm)
6.25" (158.7 mm) MIN. OPENING
10.25" (260.3 mm) MIN. TANK OPENING
0211
SolutionS for tankS Up to 80' (24.4 m) in Dia. 80'
(24.4 m)
tank Dia.
Spray nozzles
Spray Control
Spray analysis
Spray fabrication
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 180 Fluid driven tank cleaner
TAnkJET® 180 FLuID DRIVEn TAnk CLEAnER
Ideal for Cleaning:• Adhesive tanks
• Food processing vats and tanks
• Paint tanks
• Petrochemical/chemical processing reactors
• Processing tanks
• Sludge/wastewater tanks
Spray Coverage
180° Down
directional unit Provides concentrated, High-impact cleaning of Hard-to-remove residues
Features and Benefits
• Outperforms other fluid driven tank cleaners – more consistent impact over the entire pressure range
• High-impact cleaning results in shorter cycle times so tanks are returned to service more quickly
• Provides a concentrated cleaning stream that removes difficult residues and heavy sludges from the bottom and shadow areas of the tanks
• Ideal for open top tanks
• nozzles rotate on multiple axes to create a crisscrossing pattern to thoroughly clean tanks and remove the stickiest of residues
• Food-grade, oil-lubricated or flow-through gearbox designs
• no motors – TankJet 180 tank cleaners are fluid-driven
• Lightweight for easy portability
• Customizable to your operation. TankJet 180 can be used for high-concentration chemical recirculation cleaning or low pressure, high-volume cleaning. All units are built-to-order
• TankJet 180 is designed with built-in strainer to minimize clogging and for long wear life
• Great value – TankJet 180 is competitively priced, provides better performance and comes with the applications expertise and support of the world’s leader in spray technology
80' (24.4 m)tank dia.
TankJet 180 tank cleaner for tanks up to 80’ (24.4 m) in dia.
Try Before You Buy: Ask About Our Free 15-Day Trial Program
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Specifications
Max. tank dia.: 80’ (24.4 m)
Flow rate range: 30 to 300 gpm (113.5 to 1135.6 I/min)
Pressure range: 40 to 350 psi (2.8 to 24 bar)
Wash cycle time: 10 to 30 min
Max. operating temp.: 250°F (121°C)
Min. tank opening size: 12.25” (31.1 cm)
Inlet connection:
2” nPT (F) with 2-1/2” quick-disconnect (M)
2” nPT (F) with 2-1/2” nST hose thread (M)
2” BSPT (F) with 2-1/2” quick-disconnect (M)
Materials of construction:
Castings – 316 stainless steel
Gears – 17-4ph stainless steel
O-rings – self-lubricating EPDM or Viton®
Seals – high-performance spring-energized PTFE
Gear shaft bearing system – PTFE or oilite bearing
All other metallurgy – 316 stainless steel
Height: 12.2” (31 cm)
Width including nozzle housing: 12.125” (30.8 cm)
Weight: 29 lbs (13.17 kg)
Viton® is a registered trademark of DuPont Performance Elastomers.
TAnkJET® 180 FLuID DRIVEn TAnk CLEAnER
Catalog 15 - TankJet 180
80' (24.4 m)tank dia.
TankJet 180 tank cleaner
0211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® aa290Motor driven tank cleaner
consistent High-impact cleaning day-in and day-out
Features and Benefits
• Dependable, durable motor-driven units provide powerful cleaning and remove the most stubborn residues
• Customize to your cleaning operation. Choose: – CE-rated air (AG) or explosion-proof (EP) electric motor – Two- or four-nozzle hub – 3’, 4’ or 6’ (.9, 1.2 or 1.8 m) shaft length Plus, change flow rates through nozzle selection
or adjustments to inlet pressure
• Motor positioned outside of tank for longer life and fewer failures due to exposure to harmful cleaning solutions
• Long-life construction features corrosion-resistant 316 stainless steel and PTFE fluoropolymer resin seals
• Optimum impact provided by 55430 series solid stream nozzles: with stabilizer vanes that can be removed for maintenance purposes
Lubricator assembly is included with the air (AG) model only. Regular lubrication of the air supply line will significantly increase the life of the air motor.
TAnkJET® AA290 MOTOR DRIVEn TAnk CLEAnER
Ideal for Cleaning:
• Fermentation and yeast tanks and vats
• Flour silos
• Mixing tanks
• Paint tanks
Spray Coverage
360°
Explosion-proof electric motor
Air motor
TankJet AA290EP and AA290AG tank cleaners for tanks up to 80’ (24.4 m) in dia.
80' (24.4 m)tank dia.
Specifications
Max. tank dia.: 80’ (24.4 m)
Flow rate range: 22 to 200 gpm (85 to 757 l/min)
Pressure range: 50 to 250 psi (3.5 to 17 bar)
Max. operating temperature:
200°F (93°C)
Min. tank opening size:
7.25” (184 mm) for two-nozzle hub 8.25” (210 mm) for four-nozzle hub
Spray coverage: 360°
Inlet conn.: 2” nPT or BSPT (F)
Flanges:8” (203 mm) flange for two-nozzle hub 10” (254 mm) for four-nozzle hub
Motor: Air, explosion-proof electric
Shaft lengths: 3’, 4’ or 6’ (.9, 1.2 or 1.8 m)
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Cycle Time Data – Explosion-Proof Motor (EP)
Cycle Time Data – Air Motor (AG) Dimensions and Weights – Air Motor (AG)
Dimensions and Weights – Explosion-Proof Motor (EP)
Performance Data
Total Flow of Two Nozzles (Equal Capacity) gpm or l/min Liquid Inlet Pressure*Double flow rates when using four nozzles up to 200 gpm (752 l/min)
Nozzle No. 50 psi (3.5 bar)
100 psi (7 bar)
150 psi (10 bar)
200 psi (15 bar)
250 psi (17 bar)
55430-H3/4u-00100 22 (85) 32 (121) 39 (144) 45 (177) 50 (188)
55430-H3/4u-00200 45 (171) 63 (241) 77 (288) 89 (353) 100 (376)
55430-H3/4u-00250 56 (213) 79 (301) 97 (360) 112 (441) 125 (470)
55430-H3/4u-00350 78 (298) 111 (422) 136 (505) 157 (618) 175 (658)
55430-H3/4u-00400 89 (341) 126 (482) 155 (577) 179 (706) 200 (752)
*Note: Liquid inlet pressure measured near inlet connection of tank cleaner.
Approx. Speed (rpm) Supply Approx. Time for One
Complete Cycle (min.)
4120 VAC
60 Hz16
Model no. Extension Length
Overall Length
Weight with 8" Flange
Weight with 10" Flange
AA290AG_F3 3'
(0.9 m) 60-7/8" (1.5 m)
56 lbs (25.5 kg)
63 lbs (28.7 kg)
AA290AG_F4 4'
(1.2 m) 72-7/8" (1.8 m)
60 lbs (27.3 kg)
67 lbs (30.5 kg)
AA290AG_F6 6'
(1.8 m) 96-7/8" (2.5 m)
69 lbs (31.4 kg)
76 lbs (34.6 kg)
Model no. Extension Length
Overall Length
Weight with 8" Flange
Weight with 10" Flange
AA290E_F-EP33'
(0.9 m) 61-3/4" (1.6 m)
66 lbs (30.1 kg)
73 lbs (33.2 kg)
AA290E_F-EP44'
(1.2 m) 73-3/4" (1.8 m)
70 lbs (31.9 kg)
77 lbs (35.0 kg)
AA290E_F-EP66'
(1.8 m) 97-3/4" (2.5 m)
79 lbs (36.0 kg)
86 lbs (39.1 kg)
Air Pressure psi (bar)
Air Consumption scfm (l/sec)
Approx. Speed (rpm)
Approx. Time for One Complete
Cycle (min.)
50 psi (3.4 bar)
250 psi (17.2 bar)
50 psi (3.4 bar)
250 psi (17.2 bar)
12 (0.83) 4.7 (2.2) 6 2 11 32
14 (0.97) 5.4 (2.5) 8 4 7 17
16 (1.10) 6.3 (3.0) 10 8 6 8
18 (1.24) 7.1 (3.4) – 9 – 7
Spray Head Tank Diameter Opening with Two Nozzles
7.25" (184 mm) Opening
1.6" (40 mm)
Spray Head Tank Diameter Opening with Four Nozzles
1.96" (50 mm)
8.25" (210 mm)Opening
TAnkJET® AA290 MOTOR DRIVEn TAnk CLEAnER80' (24.4 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® AA290 MOTOR DRIVEn TAnk CLEAnER 80' (24.4 m)tank dia.
Ordering Information
tankJet aa290ag tank cleaner
tank cleaner nozzle no.
aa290ag 8F – 3 – 2 + 55430-H 3/4 u – 316SS – 00100I I I I I I I I I
TankCleaner
Type
8" Flange
ExtensionLength
Hub Type (No. of
Nozzles)
NozzleType
Prefix
NozzleInlet
Conn.
NozzleType
Material Code
CapacitySize
Add B after AA in the tank cleaner type and prior to nozzle type prefix for BSPT connections.
tankJet aa290e-eP tank cleaner
tank cleaner nozzle no.
aa290e 10F – eP – 3 – 4 + 55430-H 3/4 u – 316SS – 00100I I I I I I I I I I
TankCleaner
Type
10" Flange
Explosion-proof Motor
ExtensionLength
Hub Type
(No. of Nozzles)
NozzleType
Prefix
NozzleInlet
Conn.
NozzleType
Material Code
CapacitySize
Add B after AA in the tank cleaner type and prior to nozzle type prefix for BSPT connections.
8” flange
Bolt Circle Dia.
O.D.
Bolt Hole Dia.
Flange Size Flange O.D.
Bolt Circle Diameter no. of Flange Holes Bolt Hole Diameter Thickness
8” flange 13.5” 11.75” 8 0.875” 3/8”
10” flange 16” 14.25” 12 1.00” 3/8”
Bolt Circle Dia.
Bolt Hole Dia.
10” flange
O.D.
Flange Specifications
Catalog 15 - AA2900211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 80 Fluid driven Tank Cleaner
TankJeT® 80 Fluid driven Tank Cleaner
Ideal for Cleaning:• Brewery tanks
• Chemical vessels
• Fermenters
• Food and dairy tanks
• Tanker trucks
Spray Coverage
360°
Powerful, reliable Cleaning of Tanks up to 50’ (15.2 m) in dia.
Features and Benefits
• Ideal for cleaning large tanks, tanker trucks and fermenters with minimal maintenance cost
• Solid stream nozzles rotate in multiple axes to provide complete 360° coverage of entire tank every 45 revolutions
• Fluid driven, turbine driven with external gears indexes the nozzles with each rotation. Slow, rotating speed provides excellent dwell time on tank surface and improves cleaning
• Simple design is easy to maintain
• Mount permanently or move from tank to tank
• Available with two or three nozzle hub
• Lightweight – weighs only 15 lbs. (6.8 kg)
• Self -cleaning, flow-through design
• Optional external CIP nozzle helps clean unit and drop pipe
50' (15.2 m)Tank dia.
Specifications
Flow rate range:
Two-nozzle version: 50 to 95 gpm (189 to 360 l/min)Three-nozzle version: 60 to 125 gpm (227 to 473 l/min)
Pressure range: 60 to 150 psi (4.1 to 10.3 bar)Max. operating temperature:
250°F (121°C)
Rotation speed: 3 to 20 RPM
Min. tank opening size:
Two-nozzle version: 6.5” (165.1 mm) Three-nozzle version: 12.5” (317.5 mm)
Spray coverage: 360°
Inlet conn.: 1-1/2” NPT or BSPT (F)
Weight: 15 lbs. (6.8 kg)
Materials: 316SS, PTFE, UHMW-PE
Nozzles:
Two: .375” (9.5 mm) or .438” (11.1mm) orifice Three: .313” (7.8 mm) or .375” (9.5 mm) orifice
TankJet 80 tank cleaners for tanks up to 50’ (15.2 m) in dia.
Units are available with two or three nozzles. Both versions can be equipped with optional clean-in place nozzle as shown on the right.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® 80 Fluid driven Tank Cleaner
Catalog 15 - TankJet 80
50' (15.2 m)Tank dia.
0211
Nozzle No.Capacity gpm (l/min)
60 psi (4.1 bar)
70 psi (4.8 bar)
80 psi (5.5 bar)
90 psi (6.2 bar)
100 psi (6.9 bar)
110 psi (7.6 bar)
120 psi (8.3 bar)
130 psi (9.0 bar)
140 psi (9.7 bar)
150 psi (10.3 bar)
TJ80-2-375 50 (189) 57 (216) 62 (235) 65 (246) 68 (257) 73 (276) 76 (288) 79 (299) 83 (314) 86 (326)
TJ80-2-375CIP
TJ80-2-438
63 (238) 67 (254) 72 (273) 75 (284) 79 (299) 83 (314) 85 (322) 88 (333) 92 (348) 95 (360)TJ80-2-438CIP
TJ80-2-438SR
TJ80-3-31360 (227) 63 (238) 65 (246) 68 (257) 73 (276) 76 (288) 78 (295) 82 (310) 85 (322) 88 (333)
TJ80-3-313CIP
TJ80-3-375
94 (356) 97 (367) 100 (379) 103 (390) 107 (405) 111 (420) 114 (431) 118 (447) 121 (458) 125 (473)TJ80-3-375SR
TJ80-3-375SRCIP
Performance Data
TankJet 80-2 TankJet 80-3
Dimensions
Ordering Information
TankJet 80 Tank Cleaning nozzle
TJ80 __* – 2 – 375 Sr CiPi i i i i i
Model No.
Inlet Type
Model Type
Nozzle Orifice
Size
Slow Rotation
Clean In Place
* Add B for BSPT connections. If NPT connection, leave blank.
3.7” (94 mm)
12.75” (323.9 mm)
6.5” (165.1 mm)
12.75” (323.9 mm)
11.75” (298.5 mm)
12.5” (317.5 mm)
Typically used in the brewery industry, clean-in place (CIP) nozzles clean unit and down pipe.
SolutionS for tankS Up to 40' (12 m) in Dia.
40'(12 m
)tank D
ia.
Spray nozzles
Spray Control
Spray analysis
Spray fabrication
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 65 FLUID DRIVEN TANK CLEANER
TankJeT® 65 FLUID DRIVen Tank CLeaneR
Thorough, Efficient, Dependable Cleaning
Features and Benefits
• Solid stream nozzles rotate in multiple axes to provide complete 360° coverage of entire tank every 45 revolutions
• Four-nozzle hub provides tight cleaning pattern and fast cycle times
• High-temperature version made of all stainless steel can withstand temperatures up to 500°F (260°F)
• Fluid driven, turbine driven with external gears indexes the nozzles with each rotation. Slow, rotating speed provides excellent dwell time on tank surface
• Simple self-cleaning, flow-through design
• Easy to maintain – no internal reduction gears
• Can be permanently mounted or moved from tank to tank
• Lightweight – weighs only 11.75 lbs. (5.3 kg)
Ideal for cleaning:
• Brew kettles
• Chemical processing tanks
• Dairy vessels
• Food processing vats
• Spray dryers
• Tanker trucks
Spray Coverage
360°
40' (12.2 m)Tank Dia.
Specifications
Max. tank dia.: 40’ (12.2 m)
Flow rate range:
Standard version: 30 to 100 gpm (114 to 379 l/min) High-temperature version: 65 to 150 gpm (246 to 568 l/min)
Pressure range: 50 to 150 psi (3.4 to 10.3 bar)
RPM range: 5 to 40 RPM
Max. operating temperature:
Standard version: 250°F (121°C) High-temperature version: 500°F (260°C)
Min. tank opening size:
7.5” (191 mm)
Spray coverage: 360°
Inlet conn.: 1-1/2” NPT or BSPT (F)
Materials:
Standard version: Stainless steel, PTFE, UHMW-PE, nylon High-temperature version: all stainless steel
Nozzles: Four: .250 (6.4 mm) or .313 (7.9 mm) or .375 (9.5 mm)
TankJet 65 tank cleaners for tanks up to 40’ (12.2m) in dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® 65 FLUID DRIVen Tank CLeaneR
Model No.Capacity gpm (l/min)
50 psi(3.4 bar)
70 psi(4.8 bar)
90 psi(6.2 bar)
100 psi(6.9 bar)
110 psi(7.6 bar)
130 psi(9.0 bar)
150 psi(10.3 bar)
TJ65-250 30 (114) 39 (148) 45 (170) 49 (185) 53 (201) 58 (220) 63 (238)
TJ65-313 51 (193) 60 (227) 70 (265) 74 (280) 79 (299) 85 (322) 92 (348)
TJ65-375 58 (220) 69 (261) 78 (295) 83 (314) 88 (333) 94 (356) 100 (379)
TJ65-250-HT 65 (246) 78 (295) 90 (341) 96 (363) 100 (379) 109 (413) 116 (439)
TJ65-313-HT 67 (254) 83 (314) 97 (367) 103 (390) 107 (405) 117 (443) 126 (477)
TJ65-375-HT 86 (326) 105 (397) 119 (450) 125 (473) 130 (492) 143 (541) 150 (568)
Performance Data
Ordering Information
TankJet 65 Tank Cleaner
TJ65 __* – 375 – HTI I I I
Model No.
Inlet Type
Nozzle Orifice Size
High Temperature
* Add B for BSPT connections. If NPT connection, leave blank.
Dimensions
40' (12.2 m)Tank Dia.
Catalog 15 - TankJet 65
7.5” (190.5 mm)
0211
10.25” (260.4 mm)
6.63” (168.4 mm)
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® aa190 Motor driven tank cleaner
TAnkJET® AA190 MOTOR DRIVEn TAnk CLEAnER
Specifications
Max. tank dia.: 25’ (7.6 m) for standard versions; 34' (10.4 m) for high-presure versions
Flow rate range:
3.1 to 44 gpm (11.8 to 170 l/min) for standard versions; 7 to 20 gpm (26 to 78 l/min) for high-pressure versions
Pressure range:100 to 500 psi (7 to 35 bar) for standard versions; high-pressure versions up to 1000 psi (70 bar)
Max. operating temperature: 200°F (93°C)
Min. tank opening size:
3.75” (95 mm) for units providing 360° coverage; 4.5” (114.3 mm) for units providing 180° coverage
Spray coverage: 360° or 180°
Inlet conn.: 1” nPT or BSPT (F)
Motor: Air, electric, explosion-proof electric
Shaft lengths: 3’, 4’ or 6’ (.9, 1.2 or 1.8 m)
Motorized units Provide thorough, Quick cleaning and trouble-Free operation
Features and Benefits
• Versatile high-impact tank cleaner provides efficient, consistent, reliable cleaning with virtually no maintenance
• Many options allow easy customization for your cleaning operation. Choose:
– Variable speed CE-approved air (AG), electric (E) or explosion-proof (EP) electric motor
– Standard versions that operate at pressures up to 500 psi (35 bar)
– High-pressure versions that operate at pressures up to 1000 psi (70 bar) for higher impact
– 360° or 180° coverage
– 3’, 4’ or 6’ (.9, 1.2 or 1.8 m) shaft length
• Flange type – standard, 150# raised face or sanitary tri-clamp flange
• Motor is positioned outside the tank away from harmful caustics
• Lightweight – can be installed permanently or easily moved from tank to tank
• Long wear life materials of construction – corrosion-resistant 316 stainless steel and PTFE fluoropolymer resin seals
Ideal for Cleaning:
• Chemical reactors
• Food processing tanks and vats
• Paint tanks
• Pharmaceutical processing vessels
• Process tanks
• Tanker trucks
Spray Coverage
360°
180°
34' (10.4 m)tank dia.
TankJet AA190EP tank cleaners feature an electric, explosion-proof motor and provide 360° coverageTankJet AA190DAG
tank cleaners provide 180° coverage and are available in standard and high-pressure versions
TankJet AA190AG tank cleaners provide 360° coverage and are available in standard and high-pressure versions
TankJet AA190 tank cleaners for tanks up to 34’ (10.4 m) in dia.
Lubricator assembly is included with the air (AG) model only. Regular lubrication of the air supply line will significantly increase the life of the air motor.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® AA190 MOTOR DRIVEn TAnk CLEAnER
Total Flow of Two Nozzles (Equal Capacity) gpm or l/min Liquid Inlet Pressure*
Nozzle No. 100 psi (7 bar)
200 psi (15 bar)
300 psi (20 bar)
400 psi (30 bar)
500 psi (35 bar)
700 psi (50 bar)**
1000 psi (70 bar)**
1/4MEG-0010 3.1 (11.8) 4.4 (17.3) 5.4 (20) 6.3 (24) 7.0 (26) 8.2 (32) 9.8 (38)
1/4MEG-0015 4.7 (17.9) 6.6 (26) 8.1 (30) 9.4 (37) 10.5 (40) 12.4 (48) 14.9 (57)
1/4MEG-0020 6.2 (24) 8.8 (35) 10.8 (40) 12.4 (49) 13.9 (53) 16.4 (63) 19.6 (75)
1/4MEG-0025 7.7 (29) 10.9 (43) 13.3 (50) 15.4 (61) 17.2 (66) 20 (78) –
1/4MEG-0030 9.1 (35) 12.9 (51) 15.8 (59) 18.2 (72) 20 (78) – –
1/4MEG-0035 10.5 (40) 14.8 (59) 18.1 (68) 21 (83) 23 (90) – –
1/4MEG-0040 11.8 (45) 16.7 (66) 20 (76) 24 (93) 26 (101) – –
1/4MEG-0050 14.2 (54) 20 (79) 25 (92) 28 (112) 32 (121) – –
1/4MEG-0060 16.4 (63) 23 (92) 28 (102) 33 (129) 37 (140) – –
1/4MEG-0070 18.3 (70) 26 (102) 32 (118) 37 (144) 41 (156) – –
1/4MEG-0080 19.9 (76) 28 (111) 34 (128) 40 (157) 44 (170) – –
*Note: Flow rates tabulated above include pressure drop through unit. ** High-pressure versions only. For additional performance data on high-pressure units, contact your local representative.
Performance Data – AA190 Tank Cleaners
MotorType
ACFrequency
Speed(rpm)
Current(amps)
Power(watts)
Approx. Time for One Complete
Cycle (min.)
Electric50 Hz. 3.1 .39 41 11
60 Hz. 3.8 .33 34 9
Explosion-Proof
50 Hz. 0.8 0.3 33 44
60 Hz. 1.0 0.3 28 35
Cycle Time Data – Electric Motor (E and EP)
Air Pressure
Air Consumption
Approx. Speed (rpm)
Approx. Time for One Complete Cycle (min.)
psi (bar)
scfm (l/min)
50 psi (3.45 bar)
500 psi (34.48 bar)
50 psi (3.45 bar)
500 psi (34.48 bar)
6 (0.41) 3.74 (105.8) 4 1 8.8 35
8 (0.55) 4.72 (133.6) 7 4 5.0 8.8
10 (0.69) 5.84 (65.3) 10 8 3.5 4.4
*For standard and high-pressure versions.
Cycle Time Data – Air Motor* (AG, DAG)
AA190 Spray Head Tank Diameter Opening with Two Nozzles
1.3" (33 mm)
3.75" (95 mm) Opening
3.6"
(85
mm
)
3.0" (76 mm)
AA190D Spray Head Tank Diameter Opening with Two Nozzles
3.4" (86.3 mm)
4.4" (112.5 mm)
4.75" (114.3 mm)
Opening
4.5" DIA (114.3 mm)
2.0" DIA (5.8 mm)
2.6" (66 mm)
AA090
34' (10.4 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® AA190 MOTOR DRIVEn TAnk CLEAnER
Model no. Extension Length Overall Length Weight
AA190AG, AA190AGH*
3' (0.9 m) 54-1/4" (1.4 m) 14 lbs. (6.4 kg)
4' (1.2 m) 66-1/4" (1.7 m) 15-1/2 lbs. (7 kg)
6' (1.8 m) 90-1/4" (2.3 m) 18-1/2 lbs. (8.4 kg)
AA190DAG, AA190DAGH*
3' (0.9 m) 55" (1.4 m) 14 lbs. (6.4 kg)
4' (1.2 m) 67” (1.7m) 15-1/2 lbs. (7 kg)
6' (1.8 m) 91” (2.3 m) 18-1/2 lbs. (8.4 kg)
AA190E
3' (0.9 m) 48-7/8" (1.2 m) 14 lbs. (6.4 kg)
4' (1.2 m) 60-7/8" (1.5 m) 15-1/2 lbs. (7 kg)
6' (1.8 m) 84-7/8" (2.1 m) 18-1/2 lbs. (8.4 kg)
AA190E-EP
3' (0.9 m) 51-7/8" (1.3 m) 14 lbs. (6.4 kg)
4' (1.2 m) 63-7/8" (1.6 m) 15-1/2 lbs. (7 kg)
6' (1.8 m) 87-7/8" (2.2 m) 18-1/2 lbs. (8.4 kg)
*H indicates high-pressure version.
Model no. Extension Length Overall Length Weight
AA190AG3F
3' (0.9 m) 54-1/4" (1.4 m) 24-1/2 lbs. (11.1 kg)
4' (1.2 m) 66-1/4" (1.7 m) 26 lbs. (11.8 kg)
6' (1.8 m) 90-1/4" (2.3 m) 29 lbs. (13.2 kg)
AA190E3F
3' (0.9 m) 48-7/8" (1.2 m) 24-1/2 lbs. (11.1 kg)
4' (1.2 m) 60-7/8" (1.5 m) 26 lbs. (11.8 kg)
6' (1.8 m) 84-7/8" (2.1 m) 29 lbs. (13.2 kg)
AA190AG4F
3' (0.9 m) 51-7/8" (1.3 m) 29-1/2 lbs. (13.4 kg)
4' (1.2 m) 63-7/8" (1.6 m) 31 lbs. (14.1 kg)
6' (1.8 m) 87-7/8" (2.2 m) 34 lbs. (15.4 kg)
AA190AE4F
3' (0.9 m) 54-1/4" (1.4 m) 29-1/2 lbs. (13.4 kg)
4' (1.2 m) 66-1/4" (1.7 m) 31 lbs. (14.1 kg)
6' (1.8 m) 90-1/4" (2.3 m) 34 lbs. (15.4 kg)
Dimensions and Weights
Dimensions and Weights
See Accessories Section for Information on Adjustable Flanges, Mounting Kits and Tank Cleaner Adapters.
Standard Three-Prong Mounting Flange
aa190 With Standard three-Prong Flange
tank cleaner nozzle no.
aa190dagH – 3 + 1/4 Meg – 0010I I I I I
Tank Cleaner Type
Extension Length
Inlet Conn.
Nozzle Type
Capacity Size
150# Raised Face FlangeAvailable in 3" and 4".
aa190 With 150# raised Face Flange
tank cleaner nozzle no.
aa190ag 3F – 3 + 1/4 Meg – 0010I I I I I I
Tank Cleaner
Type
150# Raised Face
Flange
ExtensionLength
InletConn.
NozzleType
CapacitySize
Ordering Information
Ordering Information
34' (10.4 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® AA190 MOTOR DRIVEn TAnk CLEAnER34' (10.4 m)tank dia.
Sanitary Tri-Clamp FlangeAvailable in 3", 4" and 6".
aa190 With Sanitary tri-clamp Flange
tank cleaner nozzle no.
aa190ag 3SF – 3 + 1/4 Meg – 0010I I I I I I
TankCleaner
Type
SanitaryTri-Clamp
Flange
ExtensionLength
InletConn.
NozzleType
CapacitySize
Note: The 3" sanitary flange has a modified hub assembly that can fit through a 2.75" opening with nozzles orientated in vertical position.
Add B after AA in the tank cleaner type and prior to nozzle type prefix for BSPT connections.
Ordering Information
Model no. Extension Length Overall Length Weight
AA190AG3SF
3' (0.9 m) 54-1/4" (1.4 m) 14 lbs. (6.4 kg)
4' (1.2 m) 66-1/4" (1.7 m) 15-1/2 lbs. (7 kg)
6' (1.8 m) 90-1/4" (2.3 m) 18-1/2 lbs. (8.4 kg)
AA190E3SF
3' (0.9 m) 48-7/8" (1.2 m) 14 lbs. (6.4 kg)
4' (1.2 m) 60-7/8" (1.5 m) 15-1/2 lbs. (7 kg)
6' (1.8 m) 84-7/8" (2.1 m) 18-1/2 lbs. (8.4 kg)
AA190AG4SF
3' (0.9 m) 54-1/4" (1.4 m) 14-1/4 lbs. (6.5 kg)
4' (1.2 m) 66-1/4" (1.7 m) 15-1/2 lbs. (7 kg)
6' (1.8 m) 90-1/4" (2.3 m) 18-3/4 lbs. (8.5 kg)
AA190E4SF
3' (0.9 m) 48-7/8" (1.2 m) 14-1/4 lbs. (6.5 kg)
4' (1.2 m) 60-7/8" (1.5 m) 15-1/2 lbs. (7 kg)
6' (1.8 m) 84-7/8" (2.1 m) 18-3/4 lbs. (8.5 kg)
AA190AG6SF
3' (0.9 m) 54-1/4" (1.4 m) 17 lbs. (7.7 kg)
4' (1.2 m) 66-1/4" (1.7 m) 18-1/2 lbs. (8.4 kg)
6' (1.8 m) 90-1/4" (2.3 m) 21-1/2 lbs. (9.8 kg)
AA190E6SF
3' (0.9 m) 48-7/8" (1.2 m) 17 lbs. (7.7 kg)
4' (1.2 m) 60-7/8" (1.5 m) 18-1/2 lbs. (8.4 kg)
6' (1.8 m) 84-7/8" (2.1 m) 21-1/2 lbs. (9.8 kg)
Dimensions and Weights
See Accessories Section for Information on Adjustable Flanges, Mounting Kits and Tank Cleaner Adapters.
Catalog 15 - AA1900211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 75 Fluid driven tank cleaner
TAnkJET® 75 FLuID DRIVEn TAnk CLEAnER
Specifications
Model No. 75-1858 75-1861
Flow rate range:
11 to 27 gpm (42 to 102 lpm)
8 to 33 gpm (30 to 125 lpm)
Pressure range:
75 to 300 psi (5.2 to 20.7 bar)
50 to 300 psi (3.5 to 20.7 bar)
RPM ranges: 10 to 18 RPM 7 to 17 RPM
Max. operating temperature:
250°F (121°C)
250°F (121°C)
Min. tank opening size:
3” (76.2 mm)
3.75” (95.2 mm)
Spray coverage: 360° 360°
Inlet conn.: 3/4" nPT, BSPT (F) 3/4" nPT, BSPT (F)
Nozzles: Two: 0.234" (5.9 mm) or 0.172" (4.4 mm) orifice
Four: 0.172" (4.4 mm) or 0.125" (3.2 mm) orifice
Weight: 2 lbs (0.9 kg)
3 lbs (1.4 kg)
thorough, cost-effective cleaning of tanks, totes and iBcs up to 30’ (9.1 m) in dia.
Features and Benefits
• Ideal for medium impact cleaning and provides adequate impingement cleaning of small tanks without the expense of high impact tank cleaners
• Fluid driven with external gears to reduce speed of nozzles for better impact and cleaning efficiency
• 360° indexing pattern is completed every 45 revolutions
• Solid stream nozzles rotate in multiple axes to provide complete coverage of the entire tank
• Simple design is easy to maintain – can be rebuilt quickly and easily in about 5 minutes
• Mount permanently or move from tank to tank
• Self-cleaning, flow-through design
• Long-wearing materials – 316 stainless steel, PTFE and uHMWE-PE
Choose from two versions:
• TankJet 75-1858:
– Two nozzle hub design
– Two nozzle size options
– Fits in a 3” (76. 2 mm) opening
• TankJet 75-1861:
– Four nozzle design provides better coverage and faster cleaning
– Two nozzle size options
– Fits in a 3.75” (95.2 mm) opening
Ideal for Cleaning:
• Chemical containers
• Dairy tanks and totes
• Food and beverage tanks
• Pharmaceutical tanks
• Process tanks
TankJet 75 tank cleaners for tanks up to 30’ (9.1 m) in dia.
Spray Coverage
360°
30' (9.1 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 75 FLuID DRIVEn TAnk CLEAnER
Model no.Capacity gpm (l/min)
50 psi(3.4 bar)
75 psi(5.2 bar)
100 psi(6.9 bar)
150 psi (10.3 bar)
200 psi(13.8 bar)
250 psi(17.2 bar)
300 psi(21 bar)
TJ75-1858-234 – – – 20 (76) 23 (87) 25 (95) 27 (102)
TJ75-1858-234LP – 13 (49) 15 (57) 18 (68) – – –
TJ75-1858-172 – – – 15 (57) 18 (68) 20 (76) 22 (83)
TJ75-1858-172LP – 11 (42) 13 (49) 15 (57) – – –
TJ75-1861-172 – – – 23 (87) 29 (110) 31 (117) 33 (125)
TJ75-1861-172LP 11 (42) 15 (57) 18 (68) 22 (83) – – –
TJ75-1861-125 – – – 15 (57) 19 (72) 20 (76) 21 (80)
TJ75-1861-125LP 8 (30) 11 (42) 12 (45) 15 (57) – – –
Performance Data
Ordering Information
tankJet 75 tank cleaning Machine
tJ75 __* – 1858 – 234 lPI I I I I
Model No.
Inlet Type
Model Type
Nozzle Orifice Size
Low Pressure
* Add B for BSPT connections. If NPT connection, leave blank.
TankJet 75-1858 TankJet 75-1861
Dimensions
30' (9.1 m)tank dia.
Catalog 15 - TankJet 75
3.0” (76 mm)3.75” (95 mm)1.97”
(50 mm)1.97”
(50 mm)
6.13” (156 mm)
6.13” (156 mm)
0211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
A C E
DB
TankJet® 27500 & 27500rFluid driven nozzleS
TAnkJET® 27500 & 27500R FLuID DRIVEn nOzzLES
Specifications
Max. tank dia.: 25’ (7.6 m)
Flow rate range: 4 to 391 gpm (15.3 to 1490 l/min)
Pressure range: 10 to 50 psi (.7 to 3.5 bar)
Max. operating temperature: 200°F (93°C)
Min. tank opening size:
2” to 7” (51 to 178 mm) depending on capacity size
Spray coverage: 180° spraying up or down, 270° spraying up or down and 360°
Inlet conn. TankJet 27500: 1/2” to 3” nPT or BSPT (F)
Inlet conn. TankJet 27500R: 1/2” to 1” nPT or BSPT (F)
PtFe rotating nozzles resist Harsh chemicals and Provide excellent cleaning and rinsing
Features and Benefits
• Especially suited for CIP systems – no motor source is needed due to the reactionary force of the cleaning liquid to rotate the spray head
• Provides more impact than static spray balls
• Long-life material of construction – corrosion- and chemical-resistant PTFE fluoropolymer resin
• 27500R nozzles in 1/2” and 3/4” inlet connections are available in carbon-filled PTFE for improved thermal characteristics and higher mechanical strength over standard PTFE
• Spray angles range from 180° to 360°; can clean certain areas or entire tank interior
• 27500R has a rotating spray head that can be easily removed from the body for inspection and maintenance
• To optimize performance of the rotating spray head, use liquid free of debris
Ideal for Cleaning:
• Broke chests
• Chemical tanks
• PCB washers
• Pharmaceutical tanks
• Process tanks
Spray Coverage
180° Up 270° Up 360°
180° Down 270° Down
TankJet 27500 tank cleaning nozzle
Some TankJet 27500R nozzles available in
carbon-filled PTFE
TankJet 27500R tank cleaning nozzles
for tanks up to 25’ (7.6 m) in dia.
25' (7.6 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 27500 & 27500R FLuID DRIVEn nOzzLES
NozzleNo.
OrificeDia.
(mm)
Capacity gpm (l/min)Max. Tank
Dia. (m)10 psi (0.7 bar)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (3 bar)
50 psi (3.5 bar)
l 27500 (A thru E)-R-1/2-8-TEF 3/32" (2.4) 4.0 (15.3) 5.7 (22) 6.9 (26) 8.0 (32) 8.9 (34) 10' (3.0)
l 27500 (A thru E)-R-3/4-18-TEF 3/32" (2.4) 9.0 (34) 12.7 (50) 15.6 (58) 18 (71) 20 (77) 15' (4.3)
27500 (A thru E)-R-3/4-32-TEF 5/32" (4.0) 16 (61) 23 (89) 28 (103) 32 (126) 36 (136) 15' (4.3)
27500 (A thru E)-R-3/4-46-TEF 15/64" (6.0) 23 (88) 33 (130) 40 (148) 46 (182) 51 (196) 15' (4.3)
27500 (A thru E)-R-1-50-TEF 5/32" (4.0) 25 (95) 35 (140) 43 (161) 50 (197) 56 (215) 18' (5.5)
27500 (A thru E)-R-1-70-TEF 7/32" (5.6) 35 (133) 49 (195) 61 (225) 70 (275) 78 (300) 18' (5.5)
27500 (A thru E)-R-1-90-TEF 19/64" (7.5) 45 (172) 64 (250) 78 (290) 90 (355) 101 (385) 18' (5.5)
27500 (A thru E)-2-100-TEF 15/64" (6.0) 50 (191) 71 (280) 87 (320) 100 (395) 112 (425) 20' (6.0)
27500 (A thru E)-2-125-TEF 17/64" (6.7) 63 (240) 88 (350) 108 (400) 125 (495) 140 (530) 20' (6.0)
27500 (A thru E)-2-150-TEF 5/16" (7.9) 75 (285) 106 (420) 130 (480) 150 (590) 168 (640) 20' (6.0)
27500 (A thru E)-2-175-TEF 3/8" (9.5) 88 (335) 124 (490) 152 (560) 175 (690) 196 (745) 20' (6.0)
27500 (A thru E)-2-200-TEF 27/64" (10.7) 100 (380) 141 (560) 173 (645) 200 (790) 224 (850) 20' (6.0)
27500 (A thru E)-3-250-TEF 25/64" (9.9) 125 (475) 177 (700) 217 (805) 250 (985) 280 (1065) 25' (7.6)
27500 (A thru E)-3-300-TEF 27/64" (10.7) 150 (570) 212 (840) 260 (965) 300 (1180) 335 (1280) 25' (7.6)
27500 (A thru E)-3-350-TEF 31/64" (12.3) 175 (665) 247 (975) 303 (1130) 350 (1380) 391 (1490) 25' (7.6)
l Models available in carbon-filled PTFE.Suggested optimum operating range: 20 to 40 psi (1.5 to 3 bar).
Performance Data
Nozzle Type Inlet Dia. X Dia. Y z Flats
27500, 27500R 1/2" 1-15/16" (49.2 mm) 2-3/8" (60.3 mm) 1-1/8" (28.6 mm)
27500, 27500R 3/4" 2-1/4" (57.2 mm) 2-5/8" (66.6 mm) 1-5/16" (33.3 mm)
27500, 27500R 1" 2-3/4" (69.8 mm) 3" (76.2 mm) 1-5/8" (45.3 mm)
27500 2" 4-7/8" (123.8 mm) 4-3/8" (111 mm) 2-3/4" (69.8 mm)
27500 3" 6-7/8" (174.6 mm) 5-7/8" (149.2 mm) 3-7/8" (98.4 mm)
tankJet 27500 tank cleaning nozzle
27500 e – r – 3/4 – 18 – teF*I I I I I I
NozzleType
CoverageType
RemovableSprayHead
InletConn.
CapacitySize
MaterialCode
*Indicate CTEF for carbon-filled PTFE.
Ordering Information
Dimensions
X Dia.
Y
Z
25' (7.6 m)tank dia.
Catalog 15 - 275000211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 14 and 16 Fluid driven Tank Cleaners
TankJeT® 14 and 16 Fluid driven Tank Cleaners
rotating units Provide Better Cleaning than static spray Balls
Features and Benefits
• Similar design and appearance to static spray balls except the units rotate to ensure effective impingement of cleaning solution on tank walls
• Fluid driven, turbine driven units rotate at slow speeds – 3 to 15 rpm – for increased dwell time on tank surface compared to free spinning units
• Solid stream pattern provides full coverage
• Suitable for CIP or portable installation
• Spray head is easily removed for inspection and maintenance
• Made of 316 stainless steel and PTFE materials
Choose from two versions:
TankJet 14:
• Fits easily into a 2” Schedule 40 pipe
• For tanks up to 12’ (3.6 m) diameter
TankJet 16:
• Fits easily into a 3” Schedule 40 pipe
• For tanks up to 24’ (7.2 m) diameter
Ideal for Cleaning:
• Brewery tanks • Pharmaceutical tanks
• Chemical mixers/blenders • Totes/IBCs
• Food processing tanks • Wine tanks
24' (7.2 m)Tank dia.
Specifications
Model No. TJ14 TJ16
Flow rate range: 13 to 34 gpm (49 to 129 l/min)
30 to 76 gpm (114 to 288 l/min)
Pressure range: 50 to 200 psi (3.4 to 13.8 bar)
50 to 200 psi (3.4 to 13.8 bar)
Rotation speed: 3 to 15 RPM 3 to 15 RPM
Max. operating temperature:
250°F (121°C)
250°F (121°C)
Min. tank opening size:
2" (51 mm)
3" (76 mm)
Spray coverage: 360°; 270° down, 180° up and down
360°; 270° down, 180° up and down
Inlet conn.: 3/4" NPT, BSPT (F) 1-1/2" NPT, BSPT (F)
Weight: 2.25 lbs. (1 kg) 4.75 lbs. (2.1 kg)
TankJet 14 tank cleaner for tanks up to 12’ (3.6 m) in dia.
H d C
G
Spray Coverage
180° Up 270° Down 360°
180° Down
TankJet 16 tank cleaner for tanks up to 24’ (7.2 m) in dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Model No. Spray Coverage
Capacity gpm (l/min)
50 psi (3.4 bar)
70 psi (4.8 bar)
90 psi (6.2 bar)
100 psi (6.9 bar)
120 psi (8.3 bar)
140 psi (9.7 bar)
160 psi (11.0 bar)
180 psi (12.4 bar)
200 psi (13.8 bar)
TJ-14
d 13 (49) 16 (61) 18 (68) 19.5 (74) 21 (79) 23 (87) 25 (93) 27 (100) 28 (106)
G, H 16 (61) 18.5 (70) 21 (79) 23 (87) 24 (91) 26 (98) 28 (106) 30 (114) 32 (121)
C 17 (64) 19.5 (74) 22 (83) 25 (93) 26 (98) 28 (104) 30 (112) 32 (121) 34 (129)
TJ-16H 36 (136) 43 (163) 49 (185) 52 (197) 57 (216) 61 (231) 65 (246) 69 (261) 73 (276)
D, C, G 40 (151) 47 (178) 53 (201) 55 (208) 60 (227) 65 (246) 69 (261) 74 (280) 76 (288)
TankJeT® 14 and 16 Fluid driven Tank Cleaners
Dimensions
Ordering Information
TankJet 14 and 16 Tank Cleaners
TJ14 __* – Bi i i
Model No.
Inlet Type
Spray Coverage
Performance Data
*Add B for BSPT connections. If NPT connection, leave blank.
24' (7.2 m)Tank dia.
Catalog 15 - TankJet 14 and 160311
TankJet 16
TankJet 14
6.56” (167 mm)
8.98” (228 mm)
1.97” (50 mm)
2.82” (77 mm)
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 12900 Fixed tank cleaning nozzle
TAnkJET® 12900 FIXED TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia.: 22’ (6.7 m)
Flow rate range: 72 to 385 gpm (280 to 1470 l/min)
Pressure range: 20 to 50 psi (1.5 to 3.5 bar)
Max. operating temperature: 212°F (100°C)
Min. tank opening size: 10” (254 mm)
Materials: Brass or 316 stainless steel
Spray coverage: 360°
Inlet conn.:3” nPT or BSPT (F) Accepts 1/2”, 3/4” or 1” FullJet full cone nozzles
Stationary cluster nozzles Provide robust and reliable cleaning of deep tanks
Features and Benefits
• Features 13 FullJet® nozzles to provide high-capacity cleaning
• Simple, reliable and does not contain any moving parts
• Can be specially designed for a wide range of coverages
• To rinse deeper tanks, use Model 12900-2 with a 1-1/2” bottom outlet connection for use with a pipe extension and a TankJet 6353 nozzle assembly
Ideal for Cleaning:
• Chemical tanks
• Process tanks
• Pulp chests
• Tanker trucks
Spray Coverage
360°
22' (6.7 m)tank dia.
TankJet 12900-2 and 6353 for cleaning deeper tanks
TankJet 12900 tank cleaning nozzle for tanks up to 22’ (6.7 m) in dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 12900 FIXED TAnk CLEAnInG nOzzLE
NozzleNo.
FullJet®
Nozzle No.
Max. Free Passagein. (mm)
Capacity gpm (l/min)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (3 bar)
50 psi (3.5 bar)
12900-1-1/2 1/2 HH40 0.141 (3.6) 72 (280) 86 (320) 99 (390) 109 (415)
12900-1-3/4 3/4 HH7 0.203 (5.2) 148 (580) 180 (660) 205 (800) 225 (860)
12900-1-1 1 HH12 0.250 (6.4) 252 (1000) 306 (1130) 350 (1370) 385 (1470)
Performance Data
tankJet 12900-1 tank cleaning nozzle
assembly nozzle
12900-1 – 3/4 – 316SS + 3/4HH – 316SS 7I I I I I I
NozzleNo.
InletConn.
MaterialCode
NozzleType
MaterialCode
CapacitySize
Add B prior to Nozzle No. and Nozzle Type for BSPT connections.
Ordering Information
Dimensions and Weights
Nozzle No. A B Dia. Weight
12900-1-1/26-17/32"
(166 mm)7-1/2"
(191 mm)13.7 lbs. (6.2 kg)
12900-1-3/46-27/32"
(174 mm)8-1/4"
(210 mm)15.3 lbs. (6.9 kg)
12900-1-17-7/32"
(183 mm)9"
(229 mm)18.1 lbs. (8.2 kg)
A
B
22' (6.7 m)tank dia.
Catalog 15 - 129000211
SolutionS for tankS Up to 20' (6 m) in Dia.
20'(6 m
)tank D
ia.
Spray nozzles
Spray Control
Spray analysis
Spray fabrication
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® d40159 and d26984 Fluid driven tank cleaning nozzleS
TAnkJET® D40159 AnD D26984 FLuID DRIVEn TAnk CLEAnInG nOzzLES
Specifications
Max. tank dia.: 20’ (6.0 m)
Flow rate range: 3.2 to 31 gpm (12.0 to 128 l/min)
Pressure range: 30 to 230 psi (2 to 16 bar)
Max. operating temperature: 160°F (70°C)
Min. tank opening size: 2.25” (56 mm)
Spray coverage: D40159 – 65°, 120°, 180° and 260°; D26984 – 360°
Inlet conn.: 1/2” nPT or BSPT for stainless steel versions; 3/8” and 1/2” nPT or BSPT for PVDF versions
Kynar® is a registered trademark of Arkema, Inc.
constant-Speed nozzles Provide Superior cleaning and a choice of Spray coverages
Features and Benefits
• Features three flat sprays mounted in a rotating spray head driven by the flow of the cleaning liquid
• Rotates at nearly constant speed of 2 to 30 RPM over a wide range of fluid pressures for more thorough cleaning
• up to four times higher impact than a conventional rotating nozzle for improved cleaning efficiency
• Perfect for cleaning, sanitizing and foaming applications; slow controlled rotational speed provides more dwell time on tank surface
• PVDF nozzle body constructed of chemical and corrosion resistant Kynar® with a PTFE washer and a polyethylene sleeve
• 303 or 316 stainless steel body available with a PTFE sleeve and washer
• Sanitary tubing and wall mounting options available upon request
20' (6 m)tank dia.
Ideal for Cleaning:
• Chemical processing tanks
• Dry powder tanks
• Food processing tanks
• Mixing tanks
• Pharmaceutical tanks
TankJet D40149 and D26984 tank cleaning nozzles for tanks
up to 20’ (6 m) in dia.
TankJet D40159 and D26984 nozzles are available in stainless steel and PVDF; ATEX-certified
explosion-proof models are available in stainless steel
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® D40159 AnD D26984 FLuID DRIVEn TAnk CLEAnInG nOzzLES
Dimensions and Weights
Performance Data
nozzle InletNozzle Type
CapacitySize
Capacity gpm (l/min)
PVDF SS, 316SS 30 psi (2 bar)
40 psi (3 bar)
100 psi (5 bar)
150 psi (10 bar)
230 psi (16 bar)
3/8l 3.2 3.2 (12) 3.5 (14) 5.3 (17) 6.5 (24) 7.9 (30)
l 4.5 3.8 (14.5) 4.4 (17.0) 6.9 (22) 8.5 (32) 10.5 (40)
1/2
l l 3.2 3.2 (12) 3.5 (14) 5.3 (17) 6.5 (24) 7.9 (30)
l l 4.5 3.8 (14.5) 4.4 (17) 6.9 (22) 8.5 (32) 10.5 (40)
l l 9.9 8.4 (31.8) 9.7 (40) 15.5 (52) 19.1 (73) 24 (93)
l l 13.6 11.3 (42.9) 14.0 (55) 21 (71) 26 (101) 31 (128)
PVDF Models
A B Dia. C Dia. Weight
5-3/4"(146 mm)
1-15/16"(49 mm)
1-59/64"(49 mm)
.43 lbs.(0.19 kg)
303 and 316 Stainless Steel Models
A B Dia. C Dia. Weight
5-3/4"(146 mm)
2"(50 mm)
1-3/5"(41 mm)
1.62 lbs.(0.73 kg)
Ordering Information
* Material: Specify PVDF for Chemical Resistant Kynar®. Specify SS for Stainless Steel Type 303 (DIN 1.4305). Specify 316SS for Stainless Steel Type 316 (DIN 1.4571).
**Add “A” to the D40159 part number for upward spray toward inlet.
Add B prior to the inlet connection for BSPT connections.
A
BC BC
A
Spray Angle 260° Down 260° Up** 180° Down 180° Up** 120° Down 65° Down
CapacitySize
3.2 l l l
4.5 l l l l
9.9 l l l l l l
13.6 l l l l
D40159 Spray Coverage
note: D40159-SS, -316SS not available in 3.2 capacity. D26984 available in 360° only.
tankJet d40159 tank cleaning nozzle
d40159 – 3/8 – PvdF* 3.2 – 260 a**
I I I I I INozzleType
InletConn.
MaterialCode
CapacitySize
SprayAngle
SprayDir..
tankJet d26984 tank cleaning nozzle
d26984 – 3/8 – PvdF* – 3.2
I I I INozzleType
InletConn.
MaterialCode
CapacitySize
20' (6 m)tank dia.
Catalog 15 - D401590211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 28500 & 28500r Fluid driven tank cleaning nozzleS
TAnkJET® 28500 & 28500R FLuID DRIVEn TAnk CLEAnInG nOzzLES
Specifications
Max. tank dia.: 18’ (5.5 m)
Flow rate range: 9 to 78 gpm (34 to 295 l/min)
Pressure range: 10 to 50 psi (0.7 to 3.5 bar)
Max. operating temperature: 200°F (93°C)
Min. tank opening size:
2.5” to 4” (64 to 102 mm) depending on capacity size
Spray coverage: 180° up or down, 270° up or down and 360°
Inlet conn.: 3/4”, 1”, 1-1/2”, Dn20, Dn25 and Dn40 sanitary tubing
Sanitary, rotating nozzles resist Harsh chemicals and Provide excellent cleaning
Features and Benefits
• Threadless, tapered design promotes self-draining to prevent build-up on nozzle
• Well-suited for CIP systems – no motor source is needed due to reactionary force of cleaning liquid to rotate spray head
• Provides more impact than static spray balls
• Secured to inlet connection with 316 stainless steel locking pin
• Conforms to 3A sanitary standard 78-01 for spray cleaning devices to remain in place (does not apply to 180° spraying up coverage)
• Constructed of PTFE fluoropolymer resin – ideal for harsh cleaning chemicals
• 28500R has a rotating spray head that can be easily removed from the body for inspection and maintenance
• To optimize performance of the rotating spray head, use liquid free of debris
Ideal for Cleaning:
• Chemical tanks
• Dairy vats
• Food processing tanks
• Pharmaceutical vessels
TankJet 28500 and 28500R tank cleaning nozzles for
tanks up to 18’ (5.5 m) in dia.Conforms to 3A standards for CIP
18' (5.5 m)tank dia.
A C E
DB
Spray Coverage
180° Up 270° Up 360°
180° Down 270° Down
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 28500 & 28500R FLuID DRIVEn TAnk CLEAnInG nOzzLES
Dimensions
Ordering Information
tankJet 28500 tank cleaning nozzle
28500 e – r – 3/4 – 23 – teFI I I I I I
NozzleType
CoverageType
RemovableSprayHead
InletConn.
CapacitySize
MaterialCode
Performance Data
Nozzle No. Orifice Dia.(mm)
Capacity gpm (l/min)
10 psi (0.7 bar)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (3 bar)
50 psi (3.5 bar)
28500 (A thru E)-3/4-18-TEF 0.089" (2.3) 9 (34) 12.7 (50) 15.6 (58) 18 (71) 20.1 (77)
28500 (A thru E)-Dn20-18-TEF 0.089" (2.3) 9 (34) 12.7 (50) 15.6 (58) 18 (71) 20.1 (77)
28500 (A thru E)-3/4-23-TEF 0.110" (2.8) 11.5 (44) 16.3 (64) 19.9 (74) 23 (91) 26 (99)
28500 (A thru E)-Dn20-23-TEF 0.110" (2.8) 11.5 (44) 16.3 (64) 19.9 (74) 23 (91) 26 (99)
28500 (A thru E)-3/4-32-TEF 0.154" (3.9) 16 (61) 22.6 (89) 27.7 (103) 32 (126) 35.8 (136)
28500 (A thru E)-Dn20-32-TEF 0.154" (3.9) 16 (61) 22.6 (89) 27.7 (103) 32 (126) 35.8 (136)
28500 (A thru E)-3/4-46-TEF 0.257" (6.5) 23 (88) 32.5 (128) 39.8 (148) 46 (181) 51.4 (196)
28500 (A thru E)-Dn20-46-TEF 0.257" (6.5) 23 (88) 32.5 (128) 39.8 (148) 46 (181) 51.4 (196)
28500 (A thru E)-1-33-TEF 0.152" (3.9) 16.5 (63) 23 (92) 29 (106) 33 (131) 37 (141)
28500 (A thru E)-Dn25-33-TEF 0.152" (3.9) 16.5 (63) 23 (92) 29 (106) 33 (131) 37 (141)
28500 (A thru E)-1-50-TEF 0.209" (5.3) 25 (95) 35.4 (140) 43.3 (161) 50 (197) 55.9 (213)
28500 (A thru E)-Dn25-50-TEF 0.209" (5.3) 25 (95) 35.4 (140) 43.3 (161) 50 (197) 55.9 (213)
28500 (A thru E)-1-70-TEF 0.266" (6.8) 35 (133) 49.5 (195) 60.6 (226) 70 (276) 78.3 (298)
28500 (A thru E)-Dn25-70-TEF 0.266" (6.8) 35 (133) 49.5 (195) 60.6 (226) 70 (276) 78.3 (298)
28500 (A thru E)-1-1/2-53-TEF 0.201" (5.1) 27 (101) 37 (148) 46 (171) 53 (209) 59 (226)
28500 (A thru E)-Dn40-53-TEF 0.201" (5.1) 27 (101) 37 (148) 46 (171) 53 (209) 59 (226)
28500 (A thru E)-1-1/2-70-TEF 0.266" (6.8) 35 (132) 49 (185) 61 (231) 70 (265) 78 (295)
28500 (A thru E)-Dn40-70-TEF 0.266" (6.8) 35 (132) 49 (185) 61 (231) 70 (265) 78 (295)
Y
Z
X Dia. nozzle Inlet ID Inlet Dia. X Dia. Y z
3/4" .76" 2-1/4" (57.2 mm) 2-5/8" (66.6 mm) 3/8" (9.5 mm)
Dn20 22.2 mm 2-1/4" (57.2 mm) 2-5/8" (66.6 mm) 3/8" (9.5 mm)
1" 1.02" 2-3/4" (69.8 mm) 2-7/8" (73 mm) 1/2" (12.7 mm)
Dn25 28.2 mm 2-3/4" (69.8 mm) 2-7/8" (73 mm) 1/2" (12.7 mm)
1-1/2" 1.52" 3-5/8" (92 mm) 3-5/8" (92 mm) 3/4" (19 mm)
Dn40 40.2 mm 3-5/8" (92 mm) 3-5/8" (92 mm) 3/4" (19 mm)
Dimensions do not include connection pin length.
18' (5.5 m)tank dia.
Catalog 15 - 285000211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 9 Fluid driven Tank Cleaner
TankJeT® 9 Fluid driven Tank Cleaner
rotating nozzles effectively rinse Tanks
Features and Benefits
• Flat spray nozzles mounted in a rotating spray head driven by the flow of the cleaning liquid
• Simple and reliable – no ball bearings
• Operates effectively in any position – vertical or horizontal
• Suitable for CIP and sanitary applications
• Can be used for chemical distribution and passivation
• Made of 316 stainless steel with thermoplastic bearings
Choose from three versions:
TankJet 9-A
• Two flat sprays produce sides sprays – 2 x 175° coverage
• Low flow rates up to 5 gpm (18.9 l/min)
• For tanks up to 6’ (1.8 m) diameter
TankJet 9-B
• Six flat sprays provide 360° coverage of entire tank
• Flow rates up to 17 gpm (64 l/min)
• For tanks up to 12’ (3.6 m) diameter
TankJet 9-C
• Six flat sprays provide 360° coverage of entire tank
• High flow rates up to 38 gpm (144 l/min)
• For tanks up to 16’ (4.8 m) diameter
Ideal for Cleaning:
• Brewery tanks
• Chemical containers
• Drums and kegs
• Food processing tanks
• Pharmaceutical tanks
• Wine barrels and vats
Spray Coverage
2 x 175° 360°
16' (4.9 m)Tank dia.
Specifications
Model No. TJ9-A TJ9-B TJ9-C
Flow rate range:
1.3 to 5 gpm (4.9 to 18.9 l/min)
5 to 17 gpm (18.9 to 64 l/min)
12 to 38 gpm (45 to 144 l/min)
Pressure range:
10 to 120 psi (0.7 to 8.3 bar)
10 to 120 psi (0.7 to 8.3 bar)
10 to 120 psi (0.7 to 8.3 bar)
Max, operating temperature:
190°F (88°C)
190°F (88°C)
190°F (88°C)
Min. tank opening size:
1.0625" (27 mm)
1.375" (35 mm)
1.625" (42 mm)
Spray coverage: 2 x 175° 360° 360°
Inlet conn.: 3/8" NPT, BSPT (F)
1/2" NPT, BSPT (F)
3/4" NPT, BSPT (F)
Weight: .34 lbs. (.15 kg)
.58 lbs. (.26 kg)
.96 lbs. (.44 kg)
TankJet 9 tank cleaners for tanks up to 16’ (4.9 m) in dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® 9 Fluid driven Tank Cleaner
Dimensions
Ordering Information
TankJet 9 Tank Cleaner
TJ9 __* – ai i i
Model No.
Inlet Type
Type
Performance Data
*Add B for BSPT connections. If NPT connection, leave blank.
16' (4.9 m)Tank dia.
Catalog 15 - TankJet 90311
Model No.Capacity gpm (l/min)
10 psi (0.7 bar)
30 psi (2.1 bar)
50 psi (3.4 bar)
70 psi (4.8 bar)
90 psi (6.2 bar)
100 psi (6.9 bar)
110 psi (7.6 bar)
120 psi (8.3 bar)
TJ9-a 1.3 (4.9) 2.5 (9.5) 3 (11.4) 4 (15.1) 4.5 (17) 4.7 (17.8) 4.9 (18.5) 5 (18.9)
TJ9-B 5 (18.9) 8 (30) 11 (42) 13 (49) 14 (53) 15 (57) 16 (61) 17 (64)
TJ9-C 12 (45) 20 (76) 25 (95) 30 (114) 33 (123) 35 (133) 37 (140) 38 (144)
1.0625” (27 mm)
2.3125” (59 mm)
TankJet 9-A
TankJet 9-B
TankJet 9-C
3.5” (88 mm) 4”
(102 mm)
1.375” (35 mm)
1.625” (42 mm)
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 63225 & 63225-3aFixed SPray BallS
TAnkJET® 63225 & 63225-3A FIXED SPRAy BALLS
Specifications
Max. tank dia.: 13’ (4 m)
Flow rate range: 22 to 51 gpm (83 to 192 l/min)
Pressure range: 15 to 40 psi (1.0 to 2.8 bar)
Max. operating temperature: 400°F (204°C)
Min. tank opening size: 3.4” to 4.6” (87 to 118 mm)
Spray coverage:TankJet 63225 360° TankJet 63225 180° up, 180° down, 360° Custom drilling upon request
Inlet tube size:3/4”, 1” TankJet 63225 3/4” 1”, 1-1/2” TankJet 63225-3A
Stationary Spray Balls ideal for Sanitary rinsing
Features and Benefits
• Suitable for CIP – no moving parts
• Low-cost way to rinse easy-to-remove residues
• Choice of 180° or 360° spray coverages
• Can be installed in any position
• 316L stainless steel construction permits use of a wide array of chemicals
• 63225-3A sanitary spray balls:
– Polished 32Ra interior and exterior surface finish
– Threadless and self-draining design prevents build-up
Ideal for Cleaning:
• Chemical processing tanks
• Food processing vats and tanks
• Pharmaceutical vessels
TankJet 63225-3A spray balls for tanks up to 13’ (4 m) in dia.
13' (4 m)tank dia.
Spray Angle 180° Up 180° Down 360°
Nozzle Type
63225 l
63225 - 3A l l l
Spray Coverage
note: Custom drilling available for 63225-3A; contact your local sales engineer.
A B E
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 63225 & 63225-3A FIXED SPRAy BALLS13' (4 m)tank dia.
Catalog 15 - 63225
Performance Data
Nozzle Type/SizeCapacity gpm (l/min)
Max. Tank Dia. ft (m)15 psi
(1.0 bar)22 psi
(1.52 bar)30 psi
(2.06 bar)
63225E-3/4-22-316L 22 (83) 27 (102) 31 (117) 10 (3.0)
63225E-1-32-316L 32 (121) 39 (148) 45 (170) 13 (4.0)
Nozzle Type/SizeCapacity gpm (l/min)
Max. Tank Dia. ft (m)15 psi
(1.0 bar)25 psi
(1.7 bar)40 psi (3 bar)
63225E-.75-1.5-40-3A 31 (115) 40 (151) 51 (192) 10 (3.0)
63225E-1-2-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)
63225A-1.5-2.5-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)
63225E-1.5-2.5-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)
63225E-1.5-3-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)
63225E-1.5-4-40-3A 31 (115) 40 (151) 51 (192) 13 (4.0)
Dimensions
63225
Nozzle Type/Size Inlet Tube Size A Ball Dia. B Length C Length D Length E Pin Dia. F
63225E-3/4-22-316L 3/4"2"
(51 mm)3.64"
(93 mm).51"
(13 mm)1.25”
(31.8 mm).13"
(3.3 mm)
63225E-1-32-316L 1"2.5"
(64 mm)4.40"
(112 mm).51"
(13 mm)1.56”
(39.6 mm).13"
(3.3 mm)
63225-3A
Nozzle Type/Size Inlet Tube Size A Ball Dia. B Length C Length D Length E Pin Dia. F
63225E-.75-1.5-40-3A 3/4"1-1/2"
(38.1 mm)2-17/32"
(64.3 mm)3/8"
(9.5 mm)1/4"
(6.4 mm)9/64"
(3.6 mm)
63225E-1-2-40-3A 1"2"
(50.8 mm)3-5/16"
(84.1 mm)3/8"
(9.5 mm)3/8"
(9.5 mm)9/64"
(3.6 mm)
63225A-1.5-2.5-40-3A 1- 1/2"2-1/2"
(63.5 mm)4-1/4"
(108 mm)1/4"
(6.4 mm)3/4"
(19.1 mm)13/64"
(5.2 mm)
63225E-1.5-2.5-40-3A 1- 1/2"2-1/2"
(63.5 mm)4-1/4"
(108 mm)1/4"
(6.4 mm)3/4"
(19.1 mm)13/64"
(5.2 mm)
63225E-1.5-3-40-3A 1- 1/2"3"
(76.2 mm)4-25/32"
(121.4 mm)1/4"
(6.4 mm)3/4"
(19.1 mm)13/64"
(5.2 mm)
63225E-1.5-4-40-3A 1- 1/2"4"
(101.6 mm)5-3/4"
(146 mm)1/4"
(6.4 mm)3/4"
(19.1 mm)13/64"
(5.2 mm)
AD
C
E
B
F
0211
A
D
C
EF
B
Ordering Information
tankJet 63225 tank cleaning nozzle
63225 e – 3/4 – 22 – 316l
I I I I INozzle Type
Coverage Type
Inlet Tube Size
Capacity Size
Material Code
tankJet 63225-3a tank cleaning nozzle
63225 e – .75 1.5 – 40 – 3a
I I I I I INozzle Type
Coverage Type
Inlet Tube Size
Ball Diameter
Capacity Size
3A Designation
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® d41800e Fluid driven tank cleaning nozzleS
TAnkJET® D41800E FLuID DRIVEn TAnk CLEAnInG nOzzLES
Specifications
Max. tank dia.: 12’ (3.7 m)
Flow rate range: 2.7 to 33 gpm (12 to 128 l/min)
Pressure range: 30 to 230 psi (2 to 16 bar)
Max. operating temperature: 300°F (150°C)
Min. tank opening size: 1-1/4” (31 mm)
Spray coverage: 360°
Inlet conn.: 3/8” nPT or BSPT, Dn19
compact, constant-Speed nozzles Provide Superior cleaning
Features and Benefits
• Features three flat sprays mounted in a rotating spray head driven by the flow of the cleaning liquid
• Rotates at nearly constant speed of 2 to 30 RPM over a wide range of fluid pressures
• up to four times higher impact than conventional rotating nozzles
• Perfect for cleaning, sanitizing and foaming applications; slow controlled rotational speed provides more dwell time on tank surface
• Compact – fits in most tank openings as small as 1-1/4” (31 mm)
• Patented self-flushing water bearing design eliminates internal bearings or races
• All 316 stainless steel construction for maximum wear resistance; meets the European ATEX standard for use in explosive environments
• Sanitary pin version conforms to 3A sanitary standard 78-01 for spray cleaning devices to remain in place
• Operates at high temperatures – up to 300°F (150°C)
Ideal for Cleaning:
• Chemical processing tanks
• Dry powder tanks
• Food processing tanks
• Mixing tanks
• Pharmaceutical tanks
TankJet D41800E constant speed tank cleaning nozzles for tanks
up to 12’ (3.7 m) in dia.Sanitary pin connection conforms
to 3A standards for CIP
Spray Coverage
360°
12' (3.7 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® D41800E FLuID DRIVEn TAnk CLEAnInG nOzzLES
Dimensions and Weights
Ordering Information
tankJet d41800e tank cleaning nozzle3/8" threaded connection
d41800e – 3/8 – 316l* 9.9I I I I
NozzleType
InletConn.
MaterialCode
CapacitySize
tankJet d41800e tank cleaning nozzledn19 Sanitary connection
d41800e – 19 – 316l* 9.9 – 3aI I I I l
NozzleType
InletConn.
MaterialCode
CapacitySize
3AVersion
NozzleType
InletConn. A B Dia. C Dia. D Dia. Weight
D41800E
3/8"3"
(78 mm)1-3/16"
(30 mm)27/32"
(21 mm) –
.28 lbs. (0.13 kg)
Dn193-7/32"
(82 mm)1-3/16"
(30 mm)27/32"
(21 mm).094"
(2.4 mm).29 lbs.
(0.13 kg)
Dimensions do not include connection pin length.
D
B
C
A
Performance Data
CapacitySize
Capacity gpm (l/min)
30 psi (2 bar)
40 psi (3 bar)
100 psi (5 bar)
150 psi (10 bar)
230 psi (16 bar)
3.2 2.9 (10.8) 3.5 (14) 5.3 (17) 6.5 (24) 7.9 (30)
4.5 4.0 (15.1) 4.8 (19) 7.5 (24) 9.1 (34) 11.3 (43)
9.9 8.8 (33.2) 10.1 (40) 16.1 (52) 19.7 (73) 24 (93)
13.6 12.1 (45.7) 14.0 (55) 22 (71) 27 (101) 34 (128)
* Materials: Specify SS for Stainless Steel Type 303 (DIn1.4305). Specify 316L for Stainless Steel Type 316L (DIn1.4404).
Add B prior to the inlet connection for BSPT connections.
12' (3.7 m)tank dia.
Catalog 15 - D41800E0211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 19 Fluid driven Tank Cleaner
TankJeT® 19 Fluid driven Tank Cleaner
Slim and Sleek design ideal for Cleaning Tanks with Small Openings
Features and Benefits
• Fits in tank openings as small as 2" (51 mm) with 7/8" (22 mm) probe for even smaller keg or drum bungholes
• Sleek design helps prevent residue buildup and simplifies maintenance
• Carefully drilled solid stream orifices are strategically placed to provide four different spray coverages
• Fluid driven unit rotates at a slow speed of 3 to 15 rpm for increased dwell time on tank surface compared to free spinning units
• Suitable for CIP or portable installations
• Mount vertically, horizontally or at any angle
• Made of 316 stainless steel and PTFE material
Ideal for Cleaning:
• Chemical mixers/blenders
• Drums and kegs
• Food processing tanks
• Pharmaceutical tanks
• Tablet coating machines
12' (3.6 m)Tank dia.
TankJet 19 tank cleaner for tanks up to 12' (3.6 m) in dia.
Specifications
Flow rate range: 10 to 30 gpm (38 to 114 l/min)
Pressure range: 50 to 200 psi (3.4 to 13.8 bar)
Rotation speed: 3 to 15 RPM
Max. operating temperature:
250°F (121°C)
Min. tank opening size:
2.0" (51 mm)
Spray coverage: 360°; 270°; 180° up and down
Inlet conn.: 3/4" NPT, BSPT (F)
Weight: 2 lbs (0.9 kg)
H d
CG
Spray Coverage
180° Up 270° Down
180° Down 360°
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® 19 Fluid driven Tank Cleaner
Dimensions
Ordering Information
TankJet 19 Tank Cleaner
TJ19 __* – Ci i i
Model No.
Inlet Type
Spray Coverage
Performance Data
*Add B for BSPT connections. If NPT connection, leave blank.
12' (3.6 m)Tank dia.
Catalog 15 - TankJet 191112
Model No. Spray Coverage
Capacity gpm (l/min)
50 psi (3.4 bar)
70 psi (4.8 bar)
90 psi (6.2 bar)
100 psi (6.9 bar)
120 psi (8.3 bar)
140 psi (9.7 bar)
160 psi (11 bar)
180 psi (12.4 bar)
200 psi (13.8 bar)
TJ-19
H 10 (38) 13 (49) 15 (57) 16 (61) 18 (68) 19.5 (74) 21 (79) 22.5 (85) 24 (91)
G 12 (45) 14 (53) 16.5 (62) 17.5 (66) 19 (72) 21 (79) 22.5 (85) 24 (91) 26 (98)
d 16 (61) 18 (68) 20 (76) 21 (79) 22.5 (85) 24 (91) 26 (98) 27.5 (104) 28.5 (108)
C 17 (64) 19 (72) 21 (79) 22 (83) 24 (91) 25.5 (97) 27.5 (104) 29 (110) 30 (114)
6.65" (169 mm)
1.97" (50 mm)
SolutioNS For tANkS Up to 10' (3 m) in Dia.
10'(3 m
)tank D
ia.
Spray Nozzles
Spray Control
Spray Analysis
Spray Fabrication
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 6353 & 6353-mfpFixed tank cleaning nozzleS
TAnkJET® 6353 & 6353-MFP FIXED TAnk CLEAnInG nOzzLES
Specifications
Max. tank dia.: 10’ (3 m)
Flow rate range TankJet 6353: 8.9 to 60 gpm (35 to 230 l/min)
Flow rate range TankJet 6353-MFP: 25 to 80 gpm (93 to 301 l/min)
Pressure range: 20 to 50 psi (1.5 to 3.5 bar)
Max. operating temperature: 212°F (100°C)
Min. tank opening size: 6” (152 mm)
Materials TankJet 6353: Brass, 303 or 316 stainless steel
Materials TankJet 6353-MFP: Brass or 316 stainless steel
Spray coverage: 360°
Inlet conn.: 1-1/2” nPT or BSPT (F)
Stationary cluster nozzles Provide robust and reliable cleaning
Features and Benefits
• Features 13 FullJet® nozzles for high-capacity cleaning
• Simple, reliable and does not contain any moving parts
• TankJet 6353-MFP provides increased cleaning action by using 3/8” Maximum Free Passage (MFP) FullJet nozzles; MFP design helps reduce clogging
• Individual nozzles can be replaced with plugs to provide specific cleaning coverages
• nozzles are easily removed for cleaning and inspection
• Can be installed in any position; special designs available for a wide range of coverages
Ideal for Cleaning:
• Chemical processing tanks
• Process tanks
• Pulp chests
Spray Coverage
360°
TankJet 6353 nozzleUses 13 1/4” or 3/8” FullJet
full cone nozzles
TankJet 6353-MFP nozzleUses 13 3/8” FullJet full cone nozzles
TankJet 6353 and 6353-MFP tank cleaning nozzles for tanks up to
10’ (3 m) in dia.
10' (3 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
NozzleNo.
FullJet®
Nozzle No.Max. Free Pass
in. (mm)
Capacity gpm (l/min)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (3 bar)
50 psi (3.5 bar)
6353 1/4 GG5 0.050 (1.3) 8.9 (35) 10.8 (40) 12.3 (48) 13.6 (52)
6353 1/4 GG10 0.063 (1.6) 17.9 (70) 22 (80) 25 (97) 27 (104)
6353 3/8 GG22 0.109 (2.8) 39 (155) 48 (177) 55 (215) 60 (230)
6353 3/8 HHMFP6014 0.125 (3.2) 25 (93) 29 (108) 31 (118) 33 (123)
6353 3/8 HHMFP6022 0.156 (4.0) 38 (143) 44 (167) 49 (187) 54 (204)
6353 3/8 HHMFP6032 0.188 (4.8) 55 (206) 65 (246) 73 (276) 80 (301)
TAnkJET® 6353 & 6353-MFP FIXED TAnk CLEAnInG nOzzLES
Dimensions and Weights
Performance Data
TankJet 6353
Nozzle No. A B Dia. Weight
6353-1/4GG54-1/2"
(114 mm)4-1/2"
(114 mm)3.7 lbs. (1.6 kg)
6353-1/4GG104-1/2"
(114 mm)4-1/2"
(114 mm)3.7 lbs. (1.6 kg)
6353-3/8GG224-3/4"
(121 mm)5"
(127 mm)4.5 lbs. (2.0 kg)
TankJet 6353-MFP
Nozzle No. A B Dia. Weight
6353-3/8HHMFP60144-1/2"
(114 mm)4-1/2"
(114 mm)3.7 lbs. (1.6 kg)
6353-3/8HHMFP60224-1/2"
(114 mm)4-1/2"
(114 mm)3.7 lbs. (1.6 kg)
6353-3/8HHMFP60324-1/2”
(114 mm)4-1/2"
(114 mm)3.7 lbs. (1.6 kg)
AA
BB
Ordering Information
tankJet 6353 tank cleaning nozzle
6353 – 1/4gg – 316SS 5I I I I
NozzleNo.
NozzleType
MaterialCode
CapacitySize
Add B prior to the inlet connection for BSPT connections.
tankJet 6353-MFP tank cleaning nozzle
6353 – 3/8HHMFP – 316SS 14I I I I
NozzleNo.
NozzleType
MaterialCode
CapacitySize
10' (3 m)tank dia.
Catalog 15 - 63530211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® aa090 Motor driven tank cleaner
TAnkJET® AA090 MOTOR DRIVEn TAnk CLEAnER
Specifications
Max. tank dia.: 8’ (2.4 m)
Flow rate range: 1.5 to 7.3 gpm (5.7 to 28 l/min)
Pressure range: 100 to 500 psi (7 to 35 bar)
Max. operating temperature: 200°F (93°C)
Min. tank opening size: 2.3” (59 mm)
Spray coverage: 360°
Inlet conn.: 1” nPT or BSPT (F)
Motor: Air, electric, explosion-proof electric
Shaft lengths: 1.5’, 3’, 4’ or 6’ (.5, .9, 1.2 or 1.8 m)
Provides High-impact cleaning and trouble-Free installation
Features and Benefits
• Versatile high-impact tank cleaner provides efficient, consistent, reliable cleaning with virtually no maintenance
• Customize for your cleaning operation. Choose: – Air (AG), electric (E) or explosion-proof (EP) electric motor – nozzle capacity size – 1.5’, 3’, 4’ or 6’ (.5, .9, 1.2 or 1.8 m) shaft length – Optional adjustable flange for precise positioning
of turret in tank• Solid stream spray nozzles rotate in multiple axes
and provide thorough cleaning and complete coverage of the entire tank
• Motor is positioned outside the tank away from harmful caustics
• Lightweight – can be installed permanently or easily moved from tank to tank
• Long wear life materials of construction – corrosion-resistant 316 stainless steel and PTFE fluoropolymer resin seals
Ideal for Cleaning:
• Drums
• Process tanks
• Totes
Spray Coverage
360°
Lubricator assembly is included with the air (AG) model only. Regular lubrication of the air supply line will significantly increase the life of the air motor.
TankJet AA090AG tank cleaner for tanks up to 8’ (2.4 m) in dia.
8' (2.4 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® AA090 MOTOR DRIVEn TAnk CLEAnER
MotorType
ACFrequency
Speed(rpm)
Current(amps)
Power(watts)
Approx. Time for One Complete
Cycle (min.)
Electric50 Hz. 3.1 0.39 41 11
60 Hz. 3.8 0.33 34 9
Explosion-Proof
50 Hz. 0.8 0.3 33 44
60 Hz. 1.0 0.3 28 35
Cycle Time Data – Electric Motor (E and EP)Cycle Time Data – Air Motor (AG)
Air Pressurepsi (bar)
AirConsumptionscfm (l/min)
Approx.Speed(rpm)
Approx. Time for One Complete Cycle
(min.)
5 (0.34) 1.4 (40) 3.2 10
7 (0.48) 2.0 (57) 6 5.5
10 (0.68) 3.1 (88) 8.2 4
Model no. ExtensionLength
Overall Length Weight
AA090AG-1.5 1.5' (0.5 m) 35" (0.8 m) 12-1/2 lbs. (5.7 kg)
AA090AG-3 3' (0.9 m) 53" (1.3 m) 14 lbs. (6.4 kg)
AA090AG-4 4' (1.2 m) 65" (1.6 m) 15-1/2 lbs. (7 kg)
AA090AG-6 6' (1.8 m) 89" (2.2 m) 18-1/2 lbs. (8.4 kg)
Dimensions and Weights – Air Motor (AG)
Model no. ExtensionLength
Overall Length Weight
AA090E-1.5 1.5' (0.5 m) 29-5/8" (0.7 m) 12-1/2 lbs. (5.7 kg)
AA090E-3 3' (0.9 m) 47-5/8" (1.2 m) 14 lbs. (6.4 kg)
AA090E-4 4' (1.2 m) 59-5/8" (1.5 m) 15-1/2 lbs. (7 kg)
AA090E-6 6' (1.8 m) 83-5/8" (2.1 m) 18-1/2 lbs. (8.4 kg)
Dimensions and Weights – Electric Motor (E)
Model no. ExtensionLength Overall Length Weight
AA090E-EP-1.5 1.5' (0.5 m) 32-5/8" (0.8 m) 20 lbs. (9.1 kg)
AA090E-EP-3 3' (0.9 m) 50-5/8" (1.3 m) 22 lbs. (10 kg)
AA090E-EP-4 4' (1.2 m) 62-5/8" (1.6 m) 23 lbs. (10.5 kg)
AA090E-EP-6 6' (1.8 m) 86-5/8" (2.2 m) 26 lbs. (11.8 kg)
Dimensions and Weights – Explosion-Proof Motor (EP)
Ordering Information
tankJet aa090 tank cleaner
tank cleaner nozzle no.
aa090e – 3 + W 0005I I I I
TankCleaner
Type
ExtensionLength
NozzleType
CapacitySize
Add B after AA in the tank cleaner type and prior to nozzle inlet connection for BSPT connections.
Performance DataTotal Flow of Two Nozzles (Equal Capacity) gpm or l/min Liquid Inlet Pressure*
Nozzle No. 100 psi (7 bar)
200 psi (15 bar)
300 psi (20 bar)
400 psi (30 bar)
500 psi (35 bar)
W0005 1.5 (5.7) 2.0 (7.6) 2.4 (9.1) 2.8 (10.6) 3.2 (12.1)
W0010 2.7 (10.2) 3.7 (14.0) 4.5 (17.0) 5.1 (19.3) 5.8 (22.0)
W0014 3.5 (13.2) 4.7 (17.8) 5.8 (22.0) 6.6 (25.0) 7.3 (28.0)
*note: Flow rates tabulated above include pressure drop through unit.
2.3" (59 mm) Opening
1.1" (29 mm) .84" (22 mm)
.11" (3 mm)
.73" (18 mm)
2.0" (51 mm)
Spray Head Tank Diameter Opening
8' (2.4 m)tank dia.
Catalog 15 - AA0900211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 18250a Fluid driven tank cleaning nozzle
TAnkJET® 18250A FLuID DRIVEn TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia. 8’ (2.4 m)
Flow rate range: 10.5 to 55 gpm (48 to 205 l/min)
Pressure range: 10 to 60 psi (1 to 4 bar)
Max. operating temperature: 350°F (177°C)
Min. tank opening size: 2-7/32” (60 mm)
Spray coverage: 360°
Inlet conn.: 3/4” nPT or BSPT (F)
Ryton® is a registered trademark of Chevron Phillips Chemical Company LLC.
rotating nozzle Provides complete orbital coverage
Features and Benefits
• Features three flat sprays mounted in a rotating spray head driven by the flow of the cleaning liquid
• Precisely positioned orifices provide complete coverage of all interior surfaces
• Can be installed horizontally or vertically
• Constructed for long wear life using corrosion-resistant materials – 316 stainless steel with Ryton® (polyphenylene sulfide and kolsterized stainless steel) bearing retainers and sleeves of 50% stainless steel PTFE
• Optimize cleaning performance by using single-pass or particulate-free cleaning liquid
• Can withstand temperatures up to 350°F (177°C)
Ideal for Cleaning:
• Barrels
• Chemical tanks
• Food vats
• Processing vessels
Spray Coverage
360°
TankJet 18250A tank cleaning nozzle for
tanks up to 8’ (2.4 m) in dia.
8' (2.4 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 18250A FLuID DRIVEn TAnk CLEAnInG nOzzLE
Dimensions and Weights
NozzleNo.
Capacity gpm (l/min)
10 psi (1 bar)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (2.5 bar)
50 psi (3 bar)
60 psi (4 bar)
18250A-316SS21-316SS 10.5 (48) 14.8 (59) 18.2 (68) 21 (76) 23 (83) 26 (96)
18250A-316SS45-316SS 23 (103) 32 (126) 39 (145) 45 (162) 50 (178) 55 (205)
Performance Data
Nozzle No. A B C Hex. Weight
18250A5-29/64"
(138.4 mm)4-35/64"
(115.5 mm)2-6/13"
(53.6 mm)1-5/8"
(34.9 mm)1.6 lbs.
(0.73 kg)
A
C
B
tankJet 18250a tank cleaning nozzle
18250a – 316SS 45 – 316SSI I I I
NozzleType
Bearingsand Races
Material Code
CapacitySize
MaterialCode
Add B prior to the nozzle type connection for BSPT connections.
Ordering Information
8' (2.4 m)tank dia.
Catalog 15 - 18250A0211
Hex.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 30473 Fluid driven tank cleaning nozzle
TAnkJET® 30473 FLuID DRIVEn TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia.: 8’ (2.4 m)
Flow rate range: 2.1 to 4.5 gpm (7.8 to 18 l/min)
Pressure range: 10 to 50 psi (0.7 to 4 bar)
Max. operating temperature: 200°F (93°C)
Min. tank opening size: 1” (25 mm)
Spray coverage: Approx. 360°, 180° up, 180° down
Inlet conn.: 1/4” nPT or BSPT (M)
rotating Miniature PtFe nozzles rinse Small containers
Features and Benefits
• The reactionary force of cleaning liquid rotates the nozzle – no motor required
• Features a rotating spray head that can be easily removed from the body for inspection and maintenance
• Long wear life – PTFE resists aggressive cleaning liquids
• Fits into tank openings as small as 1” (25 mm)
• Lightweight – weighs only 0.5 oz. (0.02 kg)
Ideal for Cleaning:
• Chemical containers
• Cylinders
• Ducts
• Pipes
TankJet 30473 tank cleaning nozzle for
tanks up to 8’ (2.4 m) in dia.
8' (2.4 m)tank dia.
NozzleNo.
Capacity gpm (l/min)
10 psi (0.7 bar)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (3 bar)
50 psi (4 bar)
30473-1/4-TEF 2.1 (7.8) 2.9 (11.3) 3.5 (13) 4.0 (15) 4.5 (18)
Performance Data
tankJet 30473 tank cleaning nozzle
30473 e – 1/4 – teFI I I I
NozzleType
Coverage Type
InletConn.
MaterialCode
Add B prior to the inlet connection for BSPT connections.
Ordering Information
Dimensions and Weights
Nozzle No. A B Dia. Weight
304731-3/4"
(44.4 mm)7/8"
(22.3 mm)0.5 oz.
(0.02 kg)
B Dia.
A
Catalog 15 - 30473
A E
Spray Coverage
180° Up 180° Down 360°
B
0211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® d41892 Fluid driven tank cleaning nozzle
TAnkJET® D41892 FLuID DRIVEn TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia.: 6.5’ (2.0 m)
Flow rate range: 4.0 to 7.5 gpm (15.9 to 29 l/min)
Pressure range: 20 to 70 psi (1.5 to 5 bar)
Max. operating temperature: 160°F (70°C)
Min. tank opening size: 1-1/2” (37 mm)
Spray coverage: 360°
Inlet conn.: 3/8”, 1/2” nPT or BSPT (F)
lightweight Plastic nozzles Provide effective rinsing
Features and Benefits
• Features three flat sprays mounted in a rotating spray head driven by the flow of the cleaning liquid
• 360° spray coverage rinses entire tank
• nozzle and flat spray inserts constructed of POM and PVDF for durability and corrosion resistance
• Lightweight – weighs just 1.4 oz. (0.04 kg)
• CIP connection and ATEX-certified versions available upon request Ideal for Cleaning:
• Chemical containers
• Food containers
• Mixing tanks
Spray Coverage
360°
TankJet D41892 tank cleaning
nozzle for tanks up to 6.5’
(2 m) in dia.
6.5' (2 m)tank dia.
NozzleNo.
Capacity gpm (l/min)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (2.5 bar)
50 psi (3 bar)
60 psi (4 bar)
70 psi (5 bar)
D41892-POM-64.0
(15.9)4.9
(18.3)5.7
(20.5)6.4
(22.5)7.0 (26)
7.5 (29)
Note: Recommended operating pressure is 30 to 60 psi (2 to 4 bar).
Performance Data
Ordering Information
tankJet d41892 tank cleaning nozzle
d41892 – 1/2 – PoM – 6
I I I INozzleType
InletConn.
MaterialCode
CapacitySize
Add B prior to the inlet connection for BSPT connections.
Dimensions and Weights
Nozzle No. A B Weight
D418922.7"
(68 mm)1.46"
(37 mm)1.4 oz.
(0.04 kg)
B
A
Catalog 15 - D418920211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® d41990Micro tank cleaning nozzle
TAnkJET® D41990 MICRO TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia. 6.5 ft (2.0 m)
Flow rate range: 2.5 to 7.3 gpm (9.5 to 28 l/min)
Pressure range: 15 to 60 psi (1 to 4 bar)
Max. operating temperature: 300°F (149°C)
Min. tank opening size:
1” (25 mm) thread 2” (50 mm) CIP version
Spray coverage: 180° up, 180° down, 360°
Inlet conn.: 3/8 nPT or BSPT, CIP 182
Weight: 1.9 oz. (54 g)
rotating nozzle Provides complete coverage
Features and Benefits
• Low pressure, low volume rinsing of small tanks and containers up to 6.5’ (2 m)
• Fluid driven reactionary force nozzle – no motor source needed to drive spray head
• Micro-size nozzle fits into very small tank openings – as small as 1” (25 mm)
• All 316L stainless steel construction for long wear life and corrosion resistance
• Suitable for high temperature applications up to 300°F (149°C)
• Can be installed vertically or horizontally
Ideal for Cleaning:
• Chemical tanks
• Beverage tanks
• Canisters
• Food tanks
• Keg/drum
• Tote/container
6.5' (2 m)tank dia.
A E
Spray Coverage
180° Up 180° Down 360°
B
TankJet D41990 micro tank cleaning nozzle for tanks up
to 6.5’ (2 m) in dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® D41990 MICRO TAnk CLEAnInG nOzzLE
Capacity SizeCapacity gpm (l/min)
15 psi (1 bar)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (2.5 bar)
50 psi (3 bar)
60 psi (4 bar)
3.2 2.5 (9.4) 2.7 (10.5) 3.1 (11.5) 3.4 (12.4) 3.6 (13.2) 3.9 (14.7)
4.5 3.4 (12.7) 3.7 (14.4) 4.3 (15.9) 4.7 (17.3) 5.1 (18.5) 5.5 (20.7)
6 4.5 (16.9) 4.9 (19.2) 5.7 (21) 6.3 (23) 6.8 (25) 7.3 (28)
Performance Data
Nozzle No. InletConnection A B C
D41990
3/8”0.7”
(18 mm)2.4”
(60 mm)0.79”
(20 mm)
CIP 1820.7”
(18 mm)2.5”
(63 mm)0.84”
(21.2 mm)
d41990 tank cleaning nozzle
d41990 e – 3/8 – 316l – 3.2I I I I I
NozzleType
Coverage Type
Connection Size
Material Code
Capacity Size
Add B prior to inlet connection for BSPT connections.
Ordering Information
6.5' (2 m)tank dia.
Catalog 15 - D41990
Dimensions
C
B
A
0211
SolutioNS For tANkS Up to 5' (1.5 m) in Dia.
Spray Nozzles
Spray Control
Spray Analysis
Spray Fabrication
5'(1.5 m
)tank D
ia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 21400a Fluid driven tank cleaning nozzle
TAnkJET® 21400A FLuID DRIVEn TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia. 5’ (1.5 m)
Flow rate range: 5.0 to 22 gpm (23 to 82 l/min)
Pressure range: 10 to 60 psi (1 to 4 bar)
Max. operating temperature: 350°F (177°C)
Min. tank opening size: 2-1/4” (60 mm)
Spray coverage: 360°
Inlet conn.: 3/4” nPT or BSPT (F)
Ryton® is a registered trademark of Chevron Phillips Chemical Company LLC.
compact rotating nozzle Provides complete coverage
Features and Benefits
• Features three flat sprays mounted in a rotating spray head driven by the flow of the cleaning liquid
• Precisely positioned orifices provide complete orbital coverage of all interior surfaces
• Can be installed vertically or horizontally
• Constructed for long wear life using corrosion-resistant materials – 316 stainless steel with Ryton® (polyphenylene sulfide) and kolsterized 316 stainless steel bearing retainers; sleeves of 50% stainless steel PTFE
• Optimize cleaning performance by using single-pass or particulate-free cleaning liquid
• Can withstand temperatures up to 350°F (177°C)
Ideal for Cleaning:
• Barrels
• Chemical tanks
• Food vats
• Processing vessels
Spray Coverage
360°
TankJet 21400A tank cleaning nozzle for tanks up
to 5’ (1.5 m) in dia.
5' (1.5 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 21400A FLuID DRIVEn TAnk CLEAnInG nOzzLE
Dimensions and Weights
NozzleNo.
Capacity gpm (l/min)
10 psi (1 bar)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (2.5 bar)
50 psi (3 bar)
60 psi (4 bar)
21400A-316SS10-316SS 5.0 (23) 7.1 (28) 8.7 (32) 10 (36) 11.2 (39) 12.2 (46)
21400A-316SS18-316SS 9.0 (41) 12.7 (50) 15.6 (58) 18 (65) 20 (71) 22 (82)
Performance Data
Nozzle No. A B C Hex. Weight
21400A5-9/32"
(134 mm)4-25/64"
(111.5 mm)1-3/4"
(44.5 mm)1-5/8"
(34.9 mm)1.5 lbs.
(0.68 kg)
A
B
C
tankJet 21400a tank cleaning nozzle
21400a – 316SS 18 – 316SS
I I I INozzleType
Bearingsand Races
Material Code
CapacitySize
MaterialCode
Add B prior to the nozzle type for BSPT connections.
Ordering Information
5' (1.5 m)tank dia.
Catalog 15 - 21400A0211
Hex.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® VSM Fixed Tank Cleaning nozzle
TankJeT® VSM Fixed Tank Cleaning nozzle
Specifications
Max. tank dia.: 5' (1.5 m)
Flow rate range: 2.7 to 72 gpm (10.4 to 269 l/min)
Pressure range: 10 to 150 psi (.7 to 10 bar)
Max. operating temperature: 200°F (93°C)
Min. tank opening size: 2" (51 mm)
Spray coverage: 240°
Material: nylon
Inlet conn.: 1/2" or 3/4" nPT or BSPT (F)
lightweight Spray Balls ideal for low Pressure Rinsing
Features and Benefits
• Stationary nozzles ideal for rinsing small vessels
• Suitable for CIP – no moving parts
• 240° spray coverage via 40 spray orifices
• Can be installed in any position
• Economical, effective rinsing
• Nylon construction provides excellent chemical resistance
Ideal for Cleaning:
• Chemical containers
• Pharmaceutical vats
Spray Coverage
240° down
TankJet VSM tank cleaning nozzle for
tanks up to 5’ (1.5 m) in dia.
5' (1.5 m)Tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Dimensions and Weights
TankJeT® VSM Fixed Tank Cleaning nozzle
Nozzleno.
Max. Free Passin. (mm)
Capacity gpm (l/min)
10 psi (0.7 bar)
20 psi (1.5 bar)
40 psi (3 bar)
60 psi (4 bar)
80 psi (5 bar)
100 psi (7 bar)
130 psi (9 bar)
150 psi (10 bar)
VSM-1/2-28 0.031 (0.8) 2.7 (10.4) 3.9 (15.3) 5.5 (22) 6.7 (25) 7.8 (28) 8.7 (33) 9.9 (38) 10.6 (40)
VSM-1/2-44 0.039 (1.0) 4.3 (16.3) 6.1 (24) 8.6 (34) 10.6 (39) 12.2 (44) 13.7 (52) 15.6 (59) 16.7 (62)
VSM-1/2-90 0.059 (1.5) 8.8 (33) 12.5 (49) 17.7 (70) 22 (81) 25 (90) 28 (107) 32 (121) 34 (127)
VSM-3/4-90 0.059 (1.5) 8.8 (33) 12.5 (49) 17.7 (70) 22 (81) 25 (90) 28 (107) 32 (121) 34 (127)
VSM-1/2-140 0.077 (1.95) 13.7 (52) 19.4 (77) 28 (108) 34 (125) 39 (140) 43 (166) 50 (188) 53 (198)
VSM-3/4-140 0.077 (1.95) 13.7 (52) 19.4 (77) 28 (108) 34 (125) 39 (140) 43 (166) 50 (188) 53 (198)
VSM-1/2-190 0.091 (2.3) 18.6 (71) 26 (104) 37 (147) 46 (170) 53 (190) 59 (225) 67 (254) 72 (269)
VSM-3/4-190 0.091 (2.3) 18.6 (71) 26 (104) 37 (147) 46 (170) 53 (190) 59 (225) 67 (254) 72 (269)
Performance Data
Nozzle No. Inlet Conn.nPT or BSPT a dia. B C Weight
VSM
1/2" F1-1/4"
(31.2 mm)1-11/16" (45 mm)
1" (26 mm)
3 oz. (0.08 kg)
3/4" F1-7/8"
(47 mm)2-7/16"
(62 mm)1-1/2"
(40 mm)8 oz.
(0.225 kg)
TankJet VSM Tank Cleaning nozzle
VSM – 3/4 140
i i iNozzleType
InletConn.
CapacitySize
Add B prior to the nozzle type for BSPT connections.
Ordering Information
C
B
A
5' (1.5 m)Tank dia.
Catalog 15 - VSM0211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® M60MOBILE TANK CLEANER
TANKJET® M60 MOBILE TANK CLEANER
Specifications
Max. tank dia.: 5' (1.5 m)
Flow rate range: 1.1 to 10 gpm (4.2 to 38 l/min)
Cycle time: Under 5 min.
Max. operating liquid pressure:
1000 psi (69 bar)
Max. liquid temp.: 180°F (82°C)
Min. tank opening: 1.75" dia. (44.5 mm)
Weight: 26 lbs. (11.8 kg)
Liquid conn.: 3/8" NPT or BSPT (F)
Air line conn.: 1/4" NPT or BSPT (F)
Fast and Powerful Cleaning of Barrels, Drums and Other Vessels
Features and Benefits
• Powerful cleaning using low flow rates• Removes tough residues quickly and effectively;
solid stream sprays rotate in multiple axes for complete and thorough coverage
• Mobile - can easily be moved from one barrel or drum to the next
• Fast cycle time; less than 5 minutes. One full cycle completed every 16 revolutions
• Compact – fits in openings as small as 1-3/4" (44.5 mm) and easily inserted into standard bung hole openings
• Compatible with a variety of pumps including pressure washers
• Material construction in contact with fluid - 316 stainless steel, carbon graphite PTFE filled PEEK, EPDM, and PTFE
• Non-lubricated air motor driven for continuous and reliable operation
• Easy to operate and rebuild
Ideal for Cleaning:
• Wine barrels
• Food and beverage barrels
• Chemical and storage barrels
• Drums and kegs
• Small tanks and containers
Spray Coverage
360°
TankJet M60 tank cleaner for tanks up to 5’ (1.5 m) in dia.
5' (1.5 m)Tank Dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TANKJET® M60 MOBILE TANK CLEANER
Performance Data
A B C D E F G Weight
35.0" (89.1 cm)
21.4" (54.3 cm)
29.0" (74.2 cm)
25.5" (64.7 cm)
7.0" (17.7 cm)
10.4" (26.5 cm)
9.25" (23.5 cm)
26 lbs. (11.8 kg)
5' (1.5 m)Tank Dia.
Catalog 15 - TankJet M60O615
TankJet M60 Tank Cleaner
TJM60AG – 055
I IModel No. Nozzle
Orifice Size
Add B for BSPT connections after the model no.
Ordering Information
Cycle Time Data Non-Lubricated Air Motor
Dimensions and Weights
Model No.
Capacity gpm (l/min)
100 psi (7 bar)
200 psi (15 bar)
300 psi (20 bar)
400 psi (30 bar)
500 psi (35 bar)
700 psi (50 bar)
1000 psi (70 bar)
TJM60AG-046 1.1 (4.2) 1.6 (6.1) 1.9 (7.1) 2.2 (8.7) 2.5 (9.4) 2.9 (11.2) 3.5 (13.3)
TJM60AG-055 1.6 (6.0) 2.3 (8.8) 2.8 (10.2) 3.2 (12.5) 3.6 (13.4) 4.2 (16.1) 5.0 (19.0)
TJM60AG-060 1.9 (7.2) 2.7 (10.5) 3.3 (12.1) 3.8 (14.8) 4.2 (16.0) 5.0 (19.1) 6.0 (22.6)
TJM60AG-066 2.3 (8.7) 3.2 (12.7) 4.0 (14.6) 4.6 (17.9) 5.1 (19.4) 6.1 (23.1) 7.2 (27.4)
TJM60AG-078 3.2 (12.1) 4.5 (17.7) 5.5 (20.4) 6.4 (25.0) 7.2 (27.0) 8.5 (32.3) 10.1 (38.3)
Air Pressure psi (bar)
Air Consumption scfm (l/min)
Approx. Speed (rpm) 1000 psi/180°F (70 bar/82°C)
Approx. Time for One Complete Cycle (min.)
10 (.7) 3.9 (108) 3.5 4.5
12 (.85) 4.7 (136) 4.5 3.5
15 (1) 5.9 (162) 6.0 2.7
20 (1.4) 7.8 (224) 9.5 1.7
*Cycle time refers to the time it takes to complete one full cycle. One full cycle is completed every 16 revolutions.
F
E
B
A
D
C
G
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 23240 Fluid driven tank cleaning nozzle
TAnkJET® 23240 FLuID DRIVEn TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia.: 3’ (.9 m)
Flow rate range: 3.5 to 22 gpm (14 to 79 l/min)
Pressure range: 20 to 200 psi (1.5 to 12 bar)
Max. operating temperature: 350°F (177°C)
Min. tank opening size: 1-1/32” (26 mm)
23240-2 spray coverage: side sprays
23240-3 spray coverage: 360°
Inlet conn.: 1/2” nPT or BSPT (F)
compact, rotating nozzles Provide efficient rinsing of Barrels and kegs
Features and Benefits
• Choose from two designs: 23240-2 has two flat sprays that produce the self-rotating force and side sprays. 23240-3 adds a third spray via a top orifice to provide nearly full spherical spray coverage
• Long wear life – nozzle is constructed of 316 stainless steel with bearings and races made of specially-hardened 316 stainless steel
• Standard internal 50% stainless steel filled PTFE sleeve or optional PTFE sleeve
• Can withstand temperatures up to 350°F (177°C)
Ideal for Cleaning:
• Barrels
• Cylinders
• Ducts
• Kegs
• Pipes
• Tubes
TankJet 23240 tank cleaning nozzle for tanks up to
3’ (0.9 m) in dia.
3' (0.9 m)tank dia.
Spray Coverage
360° Side Spray
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 23240 FLuID DRIVEn TAnk CLEAnInG nOzzLE
Dimensions and Weights
NozzleNo.
Capacity gpm (l/min)
20 psi(1.5 bar)
40 psi(3 bar)
60 psi(4 bar)
80 psi(5 bar)
100 psi(6 bar)
120 psi(8 bar)
150 psi(10 bar)
200 psi(12 bar)
23240-2-316SS-5-316SS 3.5 (14) 5.0 (19.7) 6.1 (23) 7.1 (25) 7.9 (28) 8.7 (32) 9.7 (36) 11.2 (39)
23240-2-316SS-8-316SS 5.7 (22) 8.0 (32) 9.8 (36) 11.3 (41) 12.6 (45) 13.9 (52) 15.5 (58) 17.9 (63)
23240-3-316SS-5.7-316SS 4.0 (15.9) 5.7 (22) 7.0 (26) 8.1 (29) 9.0 (32) 9.9 (37) 11.0 (41) 12.7 (45)
23240-3-316SS-7-316SS 4.9 (19.5) 7.0 (28) 8.6 (32) 9.9 (36) 11.1 (39) 12.1 (45) 13.6 (50) 15.7 (55)
23240-3-316SS-10-316SS 7.1 (28) 10.0 (39) 12.2 (46) 14.1 (51) 15.8 (56) 17.3 (64) 19.4 (72) 22 (79)
Performance Data
Ordering Information
NozzleNo. A B Dia. Weight
232403-1/2"
(89 mm)1"
(25.4 mm)8 oz.
(0.23 kg)
A
B
tankJet 23240 tank cleaning nozzle
23240 – 2 – 316SS – 5 – 316SS
I I I I INozzleType
CoverageType
Bearingsand Races
Material Code
CapacitySize
MaterialCode
Add B prior to the nozzle type for BSPT connections.
3' (0.9 m)tank dia.
Catalog 15 - 232400211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Spray Coverage
210° 360°
TankJet® 3150 Fixed tank cleaning nozzle
TAnkJET® 3150 FIXED TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia.: 3’ (0.9 m)
Flow rate range: 5.2 to 26 gpm (23 to 91 l/min)
Pressure range: 10 to 150 psi (1 to 10 bar)
Max. operating temperature: 212°F (100°C)
Min. tank opening size: 2” (51 mm)
Spray coverage: 21 orifice version for 360° coverage 15 orifice version for 210° coverage
Materials: Brass, 303 stainless steel, mild steel, 316 stainless steel
Inlet conn.: 1” nPT or BSPT (M)
Stationary, Self-draining nozzle ideal for Barrel rinsing
Features and Benefits
• Stationary design – no moving parts
• Choose 21 orifices for 360° coverage or 15 orifices for 210° coverage
• Can be installed in any position
• Durable, corrosion-resistant design
• 3/4” (19 mm) neck allows drainage during washing
Ideal for Cleaning:
• Barrels
• Containers
• Drums
• Kegs
• Tubes
• Vessels
TankJet 3150 tank cleaning nozzle
for tanks up to 3’ (0.9 m) in dia.
#3 _ _ full cone tips and vanes For 3150-21- _ _ (Qty. 20) For 3150-15- _ _ (Qty. 14) the bottom ring of full cone tips is eliminated
1/4 G10 cap and vane (Qty. 1)
3' (0.9 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 3150 FIXED TAnk CLEAnInG nOzzLE
Dimensions and Weights
NozzleNo.
Max. Free Passage in. (mm)
Capacity gpm (l/min)
10 psi (1 bar)
20 psi (2 bar)
30 psi (3 bar)
40 psi (4 bar)
60 psi (5 bar)
80 psi (6 bar)
100 psi (7 bar)
150 psi (10 bar)
3150-15 0.040 (1.0) 5.2 (23) 7.2 (32) 8.7 (39) 9.9 (44) 12.1 (49) 13.8 (54) 15.3 (57) 19.0 (67)
3150-21 0.040 (1.0) 7.0 (31) 9.8 (43) 11.7 (52) 13.3 (59) 16.2 (66) 18.5 (73) 21 (77) 26 (91)
Performance Data
Ordering Information
tankJet 3150 tank cleaning nozzle
3150 – SS 15I I I
Nozzle Type
Material Code
Number ofFull Cone Spray Tips
Add B prior to the nozzle type for BSPT connections.
NozzleNo. A Dia. B C Dia. Weight
31501-11/16"(43 mm)
6-9/16"(167 mm)
3/4"(19 mm)
1-1/2 lbs.(0.68 kg)
A
BC
3' (0.9 m)tank dia.
Catalog 15 - 31500211
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 36640 Fluid driven tank cleaning nozzle
TAnkJET® 36640 FLuID DRIVEn TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia.: 3’ (0.9 m)
Flow rate range: .8 to 2.2 gpm (3.4 to 7.9 l/min)
Pressure range: 10 to 60 psi (1 to 4 bar)
Max. operating temperature: 200°F (93°C)
Min. tank opening size: 1-1/32” (26 mm)
Spray coverage: Side sprays
Inlet conn.: 1/4” nPT or BSPT (F)
compact, rotating nozzles Provide cylindrical coverage
Features and Benefits
• Two flat sprays produce the self-rotating force to drive the nozzle and provide side sprays for cylindrical coverage
• Can be mounted in any position
• Long wear life – nozzles are available in stainless steel and hardened stainless steel bearings and races
• Choice of brass, mild steel and 303 or 316 stainless steel
Ideal for Cleaning:
• Cylinders
• Ducts
• Pipes
TankJet 36640 tank cleaning nozzle
for tanks up to 3’ (0.9 m) in dia.
Spray Coverage
Side Sprays
3' (0.9 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 36640 FLuID DRIVEn TAnk CLEAnInG nOzzLE
Dimensions and Weights
NozzleNo.
Capacity gpm (l/min)
10 psi (1 bar)
20 psi (1.5 bar)
30 psi (2 bar)
40 psi (2.5 bar)
50 psi (3 bar)
60 psi (4 bar)
36640-1.7-SS 0.8 (3.4) 1.2 (4.9) 1.5 (5.3) 1.7 (6.1) 1.9 (6.8) 2.2 (7.9)
Performance Data
Nozzle No. A B Dia. C Hex. Weight
366401-7/8"
(47.6 mm)1"
(25.4 mm)1-9/16"
(39.7 mm)7/8"
(22.2 mm)3 oz.
(0.09 kg)
AC
B
tankJet 36640 tank cleaning nozzle
36640 – 1.7 – SSI I I
NozzleType
CapacitySize
MaterialCode
Add B prior to the nozzle type for BSPT connections.
Ordering Information
3' (0.9 m)tank dia.
Catalog 15 - 366400211
Hex.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJet® 15498 Fixed tank cleaning nozzle
TAnkJET® 15498 FIXED TAnk CLEAnInG nOzzLE
Specifications
Max. tank dia.: 2’ (.6 m)
Flow rate range: 5.5 to 11.7 gpm (23 to 43 l/min)
Pressure range: 60 to 150 psi (5 to 10 bar)
Max. operating temperature: 212°F (100°C)
Min. tank opening size: 2” (51 mm)
Spray coverage: 21 orifice version for 360° coverage 15 orifice version for 210° coverage
Inlet conn.: 1” nPT or BSPT (M)
Stationary, Self-draining nozzle ideal for keg rinsing
Features and Benefits
• Stationary design – no moving parts
• Choose 21 orifices for 360° coverage or 15 orifices for 210° coverage
• Reduced neck allows drainage during cleaning
• Can be installed in any position
• Durable, corrosion-resistant design; choice of 303 or 316 stainless steel
Ideal for Cleaning:
• Containers
• Drums
• Kegs
• Pipes
• Tubes
Spray Coverage
210° 360°
#1.5-SS full cone tips and #1-SS vanes
For 15498-21-SS (Qty. 20)For 15498-15-SS (Qty. 14)
the bottom ring of full cone tips is eliminated#3-SS full cone tip
and vane (Qty. 1)
TankJet 15498 tank cleaning nozzle for
tanks up to 2’ (0.6 m) in dia.
2' (0.6 m)tank dia.
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® 15498 FIXED TAnk CLEAnInG nOzzLE
Dimensions and Weights
NozzleNo.
Max. Free Passagein. (mm)
Capacity gpm (l/min)
60 psi (5 bar)
80 psi (6 bar)
100 psi (7 bar)
150 psi (10 bar)
15498-15-SS 0.094 (2.4) 5.5 (23) 6.3 (25) 7.0 (26) 8.5 (31)
15498-21-SS 0.094 (2.4) 7.7 (31) 8.7 (34) 9.6 (36) 11.7 (43)
Performance Data
NozzleNo. A Dia. B C Dia. Weight
154981-3/8"
(35 mm)6-1/8"
(156 mm)5/8"
(16 mm)1-1/8 lbs.(0.51 kg)
A
BC
tankJet 15498 tank cleaning nozzle
15498 – 15 – SSI I I
NozzleType
Number ofFull Cone Spray Tips
MaterialCode
Add B prior to the nozzle type for BSPT connections.
Ordering Information
2' (0.6 m)tank dia.
Catalog 15 - 154980211
Additional Products & Accessories
Spray nozzles
Spray Control
Spray analysis
Spray fabrication
Additional P
roducts &
Accessories
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
STRAInERS FOR TAnkJET® PRODuCTS
Model TW Strainer
Model TW Strainer
Strainers for TankJet® productsensure trouble-Free Performance
Features and Benefits
• Reduce clogging in tank cleaners and tank cleaning nozzles
• Remove contaminants from liquid to ensure continuous movement of rotating spray heads
• Extend wear life of nozzles, valves and pumps
• Wide range of options: heavy duty, heavy duty high pressure, self cleaning and a wide range of mesh sizes
Model TW:
– Large open screen area for efficient liquid straining
– Designed for minimal maintenance
– Removable bottom cap or plug for complete withdrawal of entire screen assembly
– Bottom pipe plug can be replaced with a drain cock for quick-flush cleaning
Model TWC – same features as TW plus:
– Handles large flow rates with minimal pressure drop
– 1” plugged top outlet is provided for pressure gauge installation
Model 8310A:
– Designed for high pressure operation
– Removable bottom pipe plug provides an easy method for flush cleaning
Self-Cleaning Strainers for high flow applications:
– Allows use of poor quality water with minimal risk of nozzle clogging
– Choice of models and styles – flow rates up to 1760 gpm (6662 l/min)
– Large filter area captures most debris extending time between flush cycles
– Minimal water used for flushing – downstream water supply is not interrupted
– Easy to use and maintain
Self-Cleaning Strainer
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
STRAInERS FOR TAnkJET® PRODuCTS
Strainer Compatibility Chart
Part No. Description
1/2TW Heavy Duty
Strainer
1TW Heavy Duty
Strainer
1-1/2TW Heavy Duty
Strainer
2-1/2TW Heavy Duty
Strainer
3TWCHeavy Duty
Strainer
8310A-1/2 Heavy Duty
Strainer
TankJet 360 Tank Cleaner l
TankJet 180 Tank Cleaner l
TankJet AA290 Tank Cleaner l l
TankJet 80 Tank Cleaner l
TankJet 65 Tank Cleaner l
TankJet AA190 Tank Cleaner l l
TankJet 75 Tank Cleaner l
TankJet 27500/28500 Nozzles l l l
TankJet 12900 Nozzle l l l l
TankJet D26984/ D40159 nozzles
l l
TankJet D41800E nozzle l l
TankJet 6353 Nozzle l l
TankJet AA090 Tank Cleaner l l
TankJet 18250A nozzle l l
TankJet D41892 nozzle l l
TankJet D41990 nozzle l
TankJet 21400A nozzle l l
TankJet 15498/3150 Nozzles l l
TankJet 36640 Nozzle l
TankJet 23240 Nozzle l l
Installation Suction or Pressure Side of Pump up to 130 psi (9 bar) Pressure Side
Max. flow rate with .035 bar pressure drop
11 gpm(42 l/min)
31.4 gpm (119 l/min)
71.6 gpm (271 l/min)
136.6 gpm (517 l/min)
—21.1 gpm (80 l/min)
with 36.2 psi (2.5 bar) pressure
Ask your local sales engineer for more information about our self-cleaning strainers.
Catalog 15 - Strainers
Mesh to Micron Conversion ChartMesh Recommendations
Nozzle Type Mesh Recommendation
Motor Driven Tank Cleaner 100 min.
Fluid Driven (Turbine) 30 to 50
Fluid Driven (Reactionary Force
and Constant Speed)200 min.
Fixed StationaryRefer to Mesh to Micron
Conversion Chart
Mesh Micron Inches (mm)
16 1191 0.0469 (1.2)
20 840 0.0331 (.84)
30 590 0.0232 (.58)
50 297 0.0117 (.29)
60 250 0.0098 (.24)
80 177 0.0070 (.17)
100 149 0.0059 (.14)
200 74 0.0035 (.08)
0211
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnk CLEAnInG LAnCES
Tank cleaning lance with unique constant speed TankJet D40159 for cleaning and rinsing
Tank Cleaning lances
Specifications
TankJet® tank cleaning nozzle:
Select any TankJet nozzle or spray ball
Connections: Select nPT or BSPT connections, cam lock connections, raised face flanges or tri-clamp fittings
Pipe/tube size and length:
Specify
Materials of construction:
Specify material for each component – stainless steel, PTFE, PVDF, brass, polypropylene
ensure efficient Fluid delivery to tank cleaning nozzles
Features and Benefits
• Specify to your requirements: type of tank cleaning nozzle, pipe length, flange type/connections, material
• Working with a single supplier ensures optimal performance and offers convenience
Tank cleaning lance with TankJet 63225 spray ball can be installed in any direction for 180° or 360° spray coverage in tanks up to 13’ (4 m) dia.
Tank cleaning lance with TankJet 6353 nozzle for gentle rinsing
Catalog 15 - Tank Cleaning Lances0211
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
RetRactable tank WasheR (RtW)
Automates Tank Cleaner Insertion and Retraction from Tank
Features and Benefits
• Pneumatic retraction mechanism lowers and raises the tank cleaner from the tank eliminating the need for manual labor
• Eliminates clogging resulting from residue build-up on nozzle hub when tank washers are permanently installed in the tank
• Variable stroke lengths for cleaning: 3', 4' and 6' (.9, 1.2 and 1.8 m)
• Easy-to-use, manual panel controls the insertion/retraction of the RTW and nozzle rotation. The panel can be upgraded to include isolation valve actuation
• Control box/panel can be located away from the tank for safety or convenience. Position indicators on the panel show when the tank washer is fully inserted or retracted
• Optional isolation valve ensures liquid cannot escape from the tanks when tank washer is retracted and maintains pressure inside the vessel. Indicators show when valve is open or closed
• The retractable tank washer, optional isolation valve and manual control panel are completely air operated
Ideal for Cleaning:
• Cosmetic tanks
• Food vats
• Pharmaceutical vessels
• PTFE, latex, acrylic, polymer, paint and other chemical reactors
Contact your local sales engineer for performance data.
Retractable Tank Washer (RTW)
Specifications
Max. tank dia.:High-pressure version: 40’ (12 m) Standard version: 34’ (10 m)
Max. flow rate:High-pressure version: 21 gpm (80 l/min) Standard version: 44 gpm (170 l/min)
Max. pressure:High-pressure version: 4000 psi (275 bar) Standard version: 500 psi (35 bar)
Max. operating temperature:
140°F (60°C)
Cycle time: 2.1 to 11 min
Spray coverage:
360°
Inlet conn.:High-pressure version: ½” NPT or BSPT (F) Standard version: 1” NPT or BSPT (F)
Stroke lengths: 3’, 4’ and 6’ (.9, 1.2 and 1.8 m)
Wetted parts:316 and 304 stainless steel, synthetic rubber hose, PTFE, Viton®*
Weight: 187 to 253 lbs. (85 to 115 kg)*High-pressure version only. Viton® is a registered trademark of DuPont Performance Elastomers.
Retractable Tank Washer for tanks up to 40’ (12 m) in dia.
Controller
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Retractable Tank Washer
High Pressure THA-300
Standard AA190
Nozzle Capacity Size
High Pressure 06, 10, 15, 20
Standard 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80
Isolation Valve
No Isolation Valve
Isolation Valve
Manual Control Panel
Without Isolation Valve Actuation
With Isolation Valve Actuation
Stroke Length
3' (0.9 m)
4' (1.2 m)
6' (1.8 m)
RetRactable tank WasheR (RtW)
Retractable Tank Washer Options:
Catalog 15 - RTW
Specifications
• Variable stroke lengths: 3’, 4’ and 6’ (.9, 1.2 and 1.8 m)
• Flange: 4” 150# ANSI®
• Designed to operate in a vertical position
ANSI® is a registered trademark of American National Standards Institute.
Standard RTW fully extended
Standard RTW fully retracted
1111
AIR MOTOR
NOZZLEUP DOWN
NOZZLEUP DOWN
NOZZLEUP DOWN
+
Manual Control
Manual Control Panel
RTW
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® BX InJecTor
Efficient Transformation of Steam and Cold Water into High-Pressure, High-Temperature Liquid Feeds
Features and Benefits
• Ideal feed device for tank cleaning machines and custom-designed nozzle manifolds
• Non-intrusive: suitable for use with cold, low-pressure city water and existing plant steam
• Produces a high-pressure, high-temperature liquid discharge stream
• Increased pressure provides higher impact for cleaning tough residues
• Higher temperature speeds cleaning by quickly breaking down soil
• Eliminates the need for expensive pumps and heat exchangers
• Built-in overflow valve ensures safe operation
• Provides chemical injection via a liquid control valve that siphons chemicals or detergents to maximize cleaning efficiency
TankJet® BX Injector
How It Works
Steam enters chamber and mixes with the cold water.
The cold water instantly condenses the hot steam and creates a vacuum. The cold water absorbs the heat and velocity from the steam and a high-speed stream of hot water is produced.
The hot water will discharge at higher pressure than the inlet cold water pressure. The temperature rise can be up to 110°F (43°C) above the inlet water temperature. This liquid feeds tank cleaning machines and nozzle manifolds.
Detergent (if required) is metered in and mixed into the hot water stream.
TankJet BX Injector For liquid discharge capacities
up to 110 gpm (416 l/min)
The hot water passes through the venturi and expands. The water loses speed but gains pressure as it discharges.
Overflow valve prevents dangerous accidents from occurring due to burst pipes or any blockage downstream.
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® BX InJecTor
Typical Application
TankJet BX Injector Use in Rail Car Cleaning
TankJet BX Injector feeds hot liquid into a TankJet 360 Tank Cleaning Machine.
TankJet 360 provides thorough, quick and efficient cleaning of the rail car. The use of hot water shortens cleaning time.
Performance Data
TankJet Injector No.
Steam Capacity
lbs/hr (kg/hr)
Inlet Steam Pressure psi (bar)
50 (3.4)
75 (5.2)
100 (6.9)
125 (8.6)
150 (10.3)
Maximum Liquid Discharge Pressure psi (bar)
120 (8.3)
170 (11.7)
220 (15.2)
280 (19.3)
340 (23.4)
Liquid Discharge Capacity gpm (l/min)
TJBX-301000 to 3000 (454 to 1361)
30 (114) 35 (132) 45 (170) 50 (189) 55 (208)
TJBX-501700 to 4500 (771 to 2041)
50 (189) 60 (227) 70 (265) 75 (284) 80 (303)
TJBX-702500 to 6000
(1134 to 2722)70 (265) 80 (303) 90 (341) 100 (379) 110 (416)
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® BX InJecTor
Dimensions
27.3” (693 mm)
4.41” (112 mm)
11” (279 mm)
Ordering Information
TankJet BX Injector
TJBX – 30 – __*I I I
Injector No.
Model Type
Conn.
*Add B for BSPT connections. If NPT connection, leave blank.
Specifications
Inlet steam pressure range:
50 to 150 psi (3.4 to 10.3 bar)
Steam capacity range: 1000 to 6000 lbs/hr (454 to 2722 kgs/hr)
Max. liquid discharge pressure range:
120 to 340 psi (8.3 to 23.4 bar)
Liquid discharge flow rate range:
30 to 110 gpm (114 to 416 l/min)
Max. liquid discharge temperature:
180°F (82°C)
Inlet conn.:Steam: 1-1/2" NPT or BSPT (M); Water: 1-1/2" NPT or BSPT (M); Detergent: 1/2" NPT or BSPT (M)
Outlet conn.:Discharge: 1-1/2" NPT or BSPT (M); Overflow: 2" NPT (F) or BSPT (M)
Weight: 48 lbs (22 kg)
Materials:Brass with 303SS detergent tube and EP O-ring
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Catalog 15 - TankJet BX Injector0411
TankJeT® BX InJecTor
Tank Cleaning Nozzles Commonly Used with TankJet BX Injector
TankJet Tank Cleaning NozzlesNozzle
Type/Size in (mm)
Compatible Injector
Type
Injector Steam Inlet Pressure Range
psi (bar)
Tank Cleaning Nozzles Operating Pressure
Range psi (bar)
Tank Cleaning Nozzles Flow Rate Range
gpm (l/min)
TJ-16
C, D, GTJBX30 100 to 150 (6.9 to 10.3) 60 to 100 (4.1 to 6.9) 45 to 55 (170 to 208)
TJBX50 50 to 150 (3.4 to 10.3) 80 to 200 (5.5 to 13.8) 50 to 80 (189 to 303)
HTJBX30 75 to 150 (5.2 to 10.3) 50 to 110 (3.4 to 7.6) 35 to 55 (132 to 208)
TJBX50 50 to 125 (3.4 to 8.6) 95 to 200 (6.6 to 13.8) 50 to 75 (3.4 to 5.2)
TJ-65
1/4 (6.4)TJBX30 50 to 150 (3.4 to 10.3) 50 to 120 (3.4 to 8.3) 30 to 55 (114 to 208)
TJBX50 50 to 75 (3.4 to 5.2) 105 to 140 (7.2 to 9.7) 50 to 60 (189 to 227)
5/16 (7.9)TJBX50 75 to 150 (5.2 to 10.3) 70 to 115 (4.8 to 7.9) 60 to 80 (227 to 303)
TJBX70 50 to 100 (3.4 to 6.9) 90 to 150 (6.2 to 10.3) 70 to 90 (265 to 341)
3/8 (9.5)TJBX50 75 to 150 (5.2 to 10.3) 55 to 95 (3.8 to 6.6) 60 to 80 (227 to 303)
TJBX70 50 to 125 (3.4 to 8.6) 75 to 150 (5.2 to 10.3) 70 to 100 (265 to 379)
TJ-65-HT
1/4 (6.4) TJBX70 50 to 150 (3.4 to 10.3) 58 to 135 (4.0 to 9.3) 70 to 110 (265 to 416)
5/16 (7.9) TJBX70 50 to 150 (3.4 to 10.3) 55 to 115 (3.8 to 7.9) 70 to 110 (265 to 416)
3/8 (9.5) TJBX70 100 to 150 (6.9 to 10.3) 55 to 75 (3.8 to 5.2) 90 to 110 (341 to 416)
TJ-80-2
3/8 (9.5)TJBX50 50 to 150 (3.4 to 10.3) 50 to 130 (3.4 to 9.0) 50 to 80 (189 to 303)
TJBX70 50 to 90 (3.4 to 6.2) 102 to 150 (7.0 to 10.3) 70 to 85 (265 to 322)
7/16 (11.1)TJBX50 90 to 150 (6.2 to 10.3) 65 to 105 (4.5 to 7.2) 65 to 80 (246 to 303)
TJBX70 50 to 115 (3.4 to 7.9) 80 to 150 (5.5 to 10.3) 70 to 95 (265 to 360)
TJ-80-35/16 (7.9)
TJBX50 75 to 150 (5.2 to 10.3) 60 to 125 (4.1 to 8.6) 60 to 80 (227 to 303)
TJBX70 50 to 100 (3.4 to 6.9) 95 to 150 (6.6 to 10.3) 70 to 90 (265 to 341)
3/8 (9.5) TJBX70 115 to 150 (7.9 to 10.3) 68 to 110 (4.7 to 7.6) 95 to 110 (360 to 416)
TJ-360-2
1/4 (6.4)TJBX30 50 to 150 (3.4 to 10.3) 40 to 150 (2.8 to 10.3) 30 to 55 (114 to 208)
TJBX50 50 to 150 (3.4 to 10.3) 120 to 340 (8.3 to 23.4) 50 to 80 (189 to 303)
9/32 (7.1)
TJBX30 75 to 150 (5.2 to 10.3) 40 to 110 (2.8 to 7.6) 35 to 55 (132 to 208)
TJBX50 50 to 150 (3.4 to 10.3) 80 to 220 (5.5 to 15.2) 50 to 80 (189 to 303)
TJBX70 50 to 125 (3.4 to 8.6) 170 to 350 (11.7 to 24.1) 70 to 100 (265 to 379)
5/16 (7.9)
TJBX30 115 to 150 (7.9 to 10.3) 40 to 55 (2.8 to 3.8) 40 to 75 (151 to 284)
TJBX50 50 to 150 (3.4 to 10.3) 60 to 155 (4.1 to 10.7) 50 to 80 (189 to 303)
TJBX70 50 to 150 (3.4 to 10.3) 120 to 290 (8.3 to 20.0) 70 to 110 (265 to 416)
3/8 (9.5)TJBX50 60 to 150 (4.1 to 10.3) 40 to 90 (2.8 to 6.2) 55 to 80 (208 to 303)
TJBX70 50 to 150 (3.4 to 10.3) 70 to 165 (4.8 to 11.4) 70 to 110 (265 to 416)
7/16 (11.1) TJBX70 50 to 150 (3.4 to 10.3) 45 to 105 (3.1 to 7.2) 70 to 110 (265 to 416)
1/2 (12.7) TJBX70 75 to 150 (5.2 to 10.3) 40 to 75 (2.8 to 5.2) 80 to 110 (303 to 416)
9/16 (14.3) TJBX70 90 to 150 (6.2 to 10.3) 40 to 55 (2.8 to 3.8) 90 to 110 (341 to 416)
TJ-360-3
1/4 (6.4)
TJBX30 90 to 150 (6.2 to 10.3) 40 to 72 (2.8 to 5.0) 40 to 55 (151 to 208)
TJBX50 50 to 150 (3.4 to 10.3) 60 to 155 (4.1 to 10.7) 50 to 80 (189 to 303)
TJBX70 50 to 150 (3.4 to 10.3) 120 to 290 (8.3 to 20.0) 70 to 110 (265 to 416)
9/32 (7.1)TJBX50 50 to 150 (3.4 to 10.3) 40 to 110 (2.8 to 7.6) 50 to 80 (189 to 303)
TJBX70 50 to 150 (3.4 to 10.3) 80 to 205 (5.5 to 14.1) 70 to 110 (265 to 416)
5/16 (7.9)TJBX50 65 to 150 (4.5 to 10.3) 40 to 80 (2.8 to 5.5) 55 to 80 (208 to 303)
TJBX70 50 to 150 (3.4 to 10.3) 60 to 150 (4.1 to 10.3) 70 to 110 (265 to 416)
3/8 (9.5) TJBX70 50 to 150 (3.4 to 10.3) 40 to 90 (2.8 to 6.2) 70 to 110 (265 to 416)
7/16 (11.1) TJBX70 100 to 150 (6.9 to 10.3) 40 to 60 (2.8 to 4.1) 90 to 110 (341 to 416)
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® B InJecTor
Efficient Transformation of Steam and Cold Water into High-Pressure, High-Temperature Liquid Feeds
Features and Benefits
• Ideal feed device for tank cleaning machines and custom-designed nozzle manifolds
• Non-intrusive: suitable for use with cold, low-pressure city water and existing plant steam
• Produces a high-pressure, high-temperature liquid discharge stream
• Increased pressure provides higher impact for cleaning tough residues
• Higher temperature speeds cleaning by quickly breaking down soil
• Eliminates the need for expensive pumps and heat exchangers
• Built-in overflow valve ensures safe operation
• Provides chemical injection via a liquid control valve that siphons chemicals or detergents to maximize cleaning efficiency
TankJet® B Injector
How It Works
Steam enters chamber and mixes with the cold water.
The cold water instantly condenses the hot steam and creates a vacuum. The cold water absorbs the heat and velocity from the steam and a high-speed stream of hot water is produced.
The hot water will discharge at higher pressure than the inlet cold water pressure. The temperature rise can be up to 110°F (43°C) above the inlet water temperature. This liquid feeds tank cleaning machines and nozzle manifolds.
Detergent (if required) is metered in and mixed into the hot water stream.
TankJet B Injector For liquid discharge capacities
up to 34 gpm (129 l/min)
The hot water passes through the venturi and expands. The water loses speed but gains pressure as it discharges.
Overflow valve prevents dangerous accidents from occurring due to burst pipes or any blockage downstream.
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® B InJecTor
Typical Application
TankJet B Injector Use in Tote Cleaning
Performance Data
TankJet Injector No.
Steam Capacity
lbs/hr (kg/hr)
Inlet Steam Pressure psi (bar)
50 (3.4)
75 (5.2)
100 (6.9)
125 (8.6)
150 (10.3)
Maximum Liquid Discharge Pressure psi (bar)
120 (8.3)
170 (11.7)
220 (15.2)
280 (19.3)
340 (23.4)
Liquid Discharge Capacity gpm (l/min)
TJB-4160 to 400 (73 to 182)
4 (15.1) 4.5 (17.0) 5.5 (21) 6 (23) 6.5 (25)
TJB-7280 to 700
(127 to 318)7 (26) 8 (30) 9 (34) 10.5 (40) 12 (45)
TJB-9360 to 900
(163 to 408)9 (34) 12 (45) 13 (49) 15 (57) 16.5 (62)
TJB-15700 to 1500 (318 to 680)
15 (57) 20 (76) 24 (91) 27 (102) 29 (110)
TJB-20800 to 2000 (363 to 907)
20 (76) 25 (95) 29 (110) 32 (121) 34 (129)
TankJet B Injector feeds hot liquid into a TankJet 75-1861 Tank Cleaning Machine.
TankJet 75-1861 provides thorough, quick and efficient cleaning of the tote. The use of hot water shortens cleaning time.
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TankJeT® B InJecTor
Dimensions
21.96” Max.(558 mm)
3.48”(88 mm)
9.24”(235 mm)
Ordering Information
TankJet B Injector
TJB – 4 – __*I I I
Injector No.
Model Type
Conn.
*Add B for BSPT connections. If NPT connection, leave blank.
Specifications
Inlet steam pressure range:
50 to 150 psi (3.4 to 10.3 bar)
Steam capacity range: 160 to 2000 lbs/hr (73 to 907 kgs/hr)
Max. liquid discharge pressure range:
120 to 340 psi (8.3 to 23.4 bar)
Liquid discharge flow rate range:
4 to 34 gpm (15 to 128.7 l/min)
Max. liquid discharge temperature:
180°F (82°C)
Inlet conn.:Steam: 1-1/4" NPT or BSPT (M); Water: 1-1/4" NPT or BSPT (M); Detergent: 1/2" NPT or BSPT (M)
Outlet conn.:Discharge: 3/4" NPT or BSPT (F); Overflow: 1" NPT (F) or BSPT (M)
Weight: 24 lbs (11 kg)
Materials:Brass with 303SS detergent tube and EP O-ring
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
Catalog 15 - TankJet B Injector0411
TankJeT® B InJecTor
Tank Cleaning Nozzles Commonly Used with TankJet B Injector
TankJet Tank Cleaning NozzlesNozzle
Type/Size Compatible
Injector Type
Injector Steam Inlet Pressure Range
psi (bar)
Tank Cleaning Nozzles Operating Pressure
Range psi (bar)
Tank Cleaning Nozzles Flow Rate Range
gpm (l/min)
TJ-14
cTJB-15 60 to 150 (4.1 to 10.3) 50 to 150 (3.4 to 10.3) 17 to 29 (64 to 110)
TJB-20 50 to 150 (3.4 to 10.3) 70 to 200 (4.8 to 13.8) 20 to 34 (76 to 129)
G, HTJB-15 55 to 150 (3.8 to 10.3) 50 to 170 (3.4 to 11.7) 16 to 29 (61 to 110)
TJB-20 50 to 125 (3.4 to 8.6) 80 to 200 (5.5 to 13.8) 20 to 32 (76 to 121)
DTJB-15 50 to 140 (3.4 to 9.7) 60 to 200 (4.1 to 13.8) 15 to 28 (57 to 106)
TJB-20 50 to 90 (3.4 to 6.2) 110 to 200 (7.6 to 13.8) 20 to 28 (76 to 106)
TJ-19
cTJB-15 60 to 150 (4.1 to 10.3) 50 to 190 (3.4 to 13.1) 17 to 29 (64 to 110)
TJB-20 50 to 110 (3.4 to 7.6) 80 to 200 (5.5 to 13.8) 20 to 30 (76 to 114)
DTJB-15 50 to 150 (3.4 to 10.3) 50 to 200 (3.4 to 13.8) 15 to 29 (57 to 110)
TJB-20 50 to 100 (3.4 to 6.9) 90 to 200 (6.2 to 6.2) 20 to 29 (76 to 110)
G
TJB-9 75 to 150 (5.2 to 10.3) 50 to 90 (3.4 to 6.2) 12 to 16.5 (45 to 62)
TJB-15 50 to 120 (3.4 to 8.3) 80 to 200 (5.5 to 13.8) 15 to 26 (57 to 98)
TJB-20 50 to 85 (3.4 to 5.9) 130 to 200 (9.0 to 13.8) 20 to 26 (76 to 98)
H
TJB-9 60 to 150 (4.1 to 10.3) 50 to 100 (3.4 to 6.9) 10 to 16.5 (38 to 62)
TJB-15 50 to 100 (3.4 to 6.9) 90 to 200 (6.2 to 6.2) 15 to 24 (57 to 91)
TJB-20 50 to 70 (3.4 to 4.8) 150 to 200 (10.3 to 13.8) 20 to 24 (76 to 91)
TJ-75-1858
234TJB-15 75 to 125 (5.2 to 8.6) 150 to 300 (10.3 to 20.7) 20 to 27 (76 to 102)
TJB-20 50 to 90 (3.4 to 6.2) 150 to 300 (10.3 to 20.7) 20 to 27 (76 to 102)
234LPTJB-9 100 to 150 (6.9 to 10.3) 50 to 120 (3.4 to 8.3) 13 to 16.5 (49 to 62)
TJB-15 50 to 70 (3.4 to 4.8) 100 to 150 (6.9 to 10.3) 15 to 19 (57 to 72)
172 TJB-15 50 to 90 (3.4 to 6.2) 150 to 300 (10.3 to 20.7) 15 to 22 (57 to 83)
172LP TJB-9 60 to 125 (4.1 to 8.6) 70 to 150 (4.8 to 10.3) 10 to 15 (38 to 57)
TJ-75-1861
172TJB-15 110 to 150 (7.6 to 10.3) 150 to 210 (10.3 to 14.5) 25 to 29 (95 to 110)
TJB-20 75 to 150 (5.2 to 10.3) 150 to 280 (10.3 to 19.3) 25 to 35 (95 to 132)
172LPTJB-9 75 to 150 (5.2 to 10.3) 50 to 90 (3.4 to 6.2) 12 to 16.5 (45 to 62)
TJB-15 50 to 85 (3.4 to 5.9) 80 to 150 (5.5 to 10.3) 15 to 21 (57 to 79)
125 TJB-15 55 to 95 (3.8 to 6.6) 150 to 300 (10.3 to 20.7) 16 to 23 (61 to 87)
125LPTJB-7 100 to 150 (6.9 to 10.3) 50 to 100 (3.4 to 6.9) 9 to 12 (34 to 45)
TJB-9 50 to 125 (3.4 to 8.6) 50 to 140 (3.4 to 9.7) 9 to 15 (34 to 57)
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET ACCESSORIES
Simplify installation, optimize Performance
ADJUSTABlE FlANGES FOR TANKJET AA190 AND AA090 TANK ClEANERS
Features and Benefits
• Maximize cleaning effectiveness by positioning nozzle turret to clean around obstructions or targeting skim lines or other areas requiring extra impact
– Standard adjustable flanges allow positioning the nozzles at various depths along the length of the extension
– Adjustable ball swivel flanges allow adjustment of the spray head by as much as 60°
• Choice of connections: tri-clamp fitting, three-prong flange, 150# flange connection
ADAPTERS AND MOUNTING KITS
Features and Benefits
• Tapered manway adapter enables drop-in-place installation of the TankJet 360 with tanker truck openings between 17” and 21” (432 and 533 mm); 304 stainless steel construction
• Chemically-resistant adapter enables any air or electric TankJet AA090 or AA190 tank cleaner to be used in tanks with inlet sizes ranging from 2” to 4”
• Simplify mounting the standard TankJet AA190 4” three-prong flange to a 4” 150# flange. Kit includes a 4” 316 stainless steel raised face flange, stainless steel lock washers, bolts and PTFE gasket
TankJet® accessories
Three-prong Adjustable Flange Can be used with TankJet AA090 and AA190 tank cleaners
Ball Swivel Adjustable Flange Choose 4” or 6” 150# adjustable ball swivel flanges. 4” sanitary version also available
Adjustable FlangeChoice of 2-1/2”, 3”, 4” or 6” tri-clamp fittings
Adapter for TankJet AA090 and AA190 Tank Cleaners Has a 6.25” OD, Celcon® construction with 304 stainless steel screws
Mounting KitIncludes everything you need – flange, lock washers, bolts and gasket
Manway AdapterIncludes vent for vapor release, shield to prevent liquid from spraying into vent and removable plug that allows cone to be filled with liquid if additional weight is desired
Raised Face Adjustable Flange Choice of 2”, 3” or 4” 150#
raised face flanges
Celcon® is a registered trademark of Celanese Corporation.
Additional Products & Accessories
1.800.95.SPRAY | Intl. 1.630.665.5000 | www.tankjet.com
TAnkJET® ACCESSORIES
Catalog 15 - Accessories
Dimensions and Weights
Model no. Length Outside Diameter Weight
Adjustable Flange for Tanks with Tri-Clamp Fitting
39205-2-1/2 4-3/4" (121 mm) 3" (76 mm) 2 lbs. (.9 kg)
39205-3 4-3/4” (121 mm) 3.6” (91 mm) 2.1 lbs. (.95 kg)
39205-4 4-3/4” (121 mm) 4.7” (119 mm) 2.5 lbs. (1.1 kg)
39205-6 4-3/4” (121 mm) 6.6” (168 mm) 5.3 lbs. (2.4 kg)
Adjustable Three-Prong Flange
22250 4-1/16" (103 mm) 5" (127 mm) 2.8 lbs. (1.3 kg)
Adjustable Flange for Tanks with 150# Connections
46395-2 4-13/16" (122 mm) 6" (152 mm) 12 lbs. (5.4 kg)
46395-3 4-15/16" (125 mm) 7.5" (191 mm) 12.9 lbs. (5.9 kg)
46395-4 5" (127 mm) 9" (229 mm) 17.7 lbs. (8.0 kg)
Ball Swivel Adjustable Flange
43047-4 6-3/4" (172 mm) 9" (229 mm) 20 lbs. (9.1 kg)
43047-6 6-3/4" (172 mm) 11" (279 mm) 30 lbs. (13.6 kg)
Tapered Manway with 1-1/2" NPT (M) Both Ends
46573 46" (1,168 mm) 22" (559 mm) 75 lbs. (34 kg)
Adapter
45260 3-3/16" 6.25" (159 mm) 1 lb. (.45 kg)
Mounting Kit
39204 15/16" (24 mm) 9" (229 mm) 15 lbs. (6.8 kg)
adapter
45260 – ceI I
Model No.
Material Code
Manway adapter
46573 – SSI I
Model No.
Material Code
Ordering Information
Mounting kit
39204 – 4 – 316SSI I I
Model No.
Flange Size
Material Code
adjustable Flange
39205 – 3 – 316SSI I I
Model No.
FlangeSize
MaterialCode
three-prong adjustable Flange
22250 – 316SSI I
Model No.
Material Code
Ball Swivel adjustable Flange
43047 – 4 – 316SSI I I
ModelNo.
FlangeSize
MaterialCode
raised Face adjustable Flange
46395 – 4 – 316SSI I I
ModelNo.
FlangeSize
MaterialCode
0211
Let Us Help Optimize Your
Tank Cleaning OperationsTell us about:
• The size of your tank
• The residue that needs to be cleaned
• The cleaning liquid used
And we’ll tell you which of our many automated tank cleaning products is right for the job. With a newly expanded product line, we have solutions for:
• Gentle rinsing to high-impact cleaning to remove stubborn residues
• Containers with diameters as small as 2’ and tanks as large as 100’
• Portable or clean-in-place operation
Plus, we offer:
• Unmatched service – dedicated, local sales engineers ready to help optimize your operations
• Free on-site evaluations, trial programs on some products, lease programs and more
Call 1.800.95.SPRAY or visit www.tankjet.com for more information.
New TankJet® 360 is available in low-flow and flow-through versions. Choose from two- or three-nozzle designs.
North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA
Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000 Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842
www.spray.com
Bulletin No. 688 Printed in the U.S.A. ©Spraying Systems Co. 2011
SprayNozzles
SprayControl
SprayAnalysis
SprayFabrication