Tail rotor manualTail Blade Grip Assembly
Tail Pitch Slider Link Assembly ( Not included in H0324-S )
Tail Pitch Slider Assembly
Buttom Head Cap Screw M4x6mm Tail Pitch Slider Link (H0261-S)
Tail Blade Grip (H0327-S)
Spindle Shaft (H0329-S)
Note: Smaller ID
Note: Larger ID
Spacer 7.5x 10x0.5mm
Spacer 2x 3x3mm
...x2
...x4
Note: It is a normal for the tail to feel a bit tight after initial assembly as the tail spindle preload is ussually high when the helicopter is brand new. The preload will loosen up after 2-5 flights allowing the system to become smooth.
Spare Parts
H0325-S Tail Rotor Shaft With Tail Hub Assembled x 1pc. HC153-S Cup Point Set Screws M4x6mm x 1pc. HC335-S Tail Hub Oring x 2pcs. H0327-S Aluminum Tail Grip x 2pcs. HC411-S Bearing Ø5xØ10x4mm x 4pcs. HC435-S Thrust Bearing Ø5xØ10x4mm x 2pcs. HC096-S Button Head Cap Screw M4x6mm x 2pcs. HC004-S Socket Head Cap Screw M2x6mm x 2pcs. HC330-S Spacer Ø5xØ9x0,75mm x 2pcs. HC349-S Spacer Ø7,5xØ10x0,5mm x 2pcs.
Copyright@2013 - SAB Heli Division - All rights reserved
TAIL ROTOR [H0324-S] Manual