SWITCHBOARD IDENTIFICATION AND TECHNICAL DESCRIPTION
Identification of plant:
Manufacturer:
Project:
Board identification code / Project number:
Intended use of board:
Dimensions of board (mm): W = H = D =
Degree of protection: IP
Rated operating voltage Ue (V):
Rated current of the assembly InA (A):
Prospective short-circuit current Icp (kA):
Rated short-time withstand current 1s Icw (kA):
Busbar system execution: TN-C ; TN-S ; TN-C-S ; TT ; IT
Place and data: Signature
to be completed and attached to the Technical Documentation
TEST REPORT
Company name of Assembler:
Identification of plant:
Board identification code / Project number:
Intended use of board:
Project: Data:
Dimensions of board (mm): W = H = D =
Internal separation:
Degree of protection: IP
Rated operating voltage Ue (V):
Rated current of the assembly InA (A):
Prospective short-circuit current Icp (kA):
Rated short-time withstand current 1s Icw (kA):
Busbar system execution: TN-C ; TN-S ; TN-C-S ; TT ; IT
to be completed and attached to the Technical Documentation
ROUTINE VERIFICATION CHECK LIST - CEI EN 61439-2
CHECKED RESULT
Construction (see 11.2 to 11.8): Positive Negative
1 degree of protection of enclosures;
2 clearances and creepage distances;
3 protection against electric shock and integrity of protective circuits;
4 incorporation of built-in components;
5 internal electrical circuits and connections;
6 terminals for external conductors;
7 mechanical operation.
CHECKED RESULT
Performance (see 11.9 to 11.10): Positive Negative
1 dielectric properties;
2 wiring, operational performance and function.
The board has passed the tests defined above and is therefore accepted as conforming to the order.
Place and data:
Tester Customer
to be completed and attached to the Technical Documentation