Download - Sulfuric acid safety
PropertiesChemical formula H2SO4 pH (1% soln/water): Acidic.Specific Gravity: 1.84 (Water =
1)Color: Colorless.Solubility: Easily soluble in cold
water (Exothermic rection).Class 8 – Corrosives.
Function PH adjustment controlling and
cleaning agent for scalesUsed For
U/S of automatic filters “PH adjustment” 7-8.6 CEB for U.F “anti-scalant” Regeneration of Polisher “source of H+ group for
cations replacement” Neutralization vessels “PH adjustment” 6 - 9 Cooling Tower basin “PH adjustment” 8 - 8.6
Sulfuric acid safetyFirst aid Acute symptoms Types of
exposure
Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention.
Corrosive. Burning sensation. Sore throat. Cough. Laboured breathing. Shortness of breath. Symptoms may be delayed .
•Inhalation
Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention.
Corrosive. Redness. Pain. Blisters. Serious skin burns.
•Skin
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
Corrosive. Redness. Pain. Severe deep burns.
•Eyes
Rinse mouth. Do NOT induce vomiting. Refer for medical attention.
Corrosive. Abdominal pain. Burning sensation. Shock or collapse.
•Ingestion
IN ALL CASES CONSULT A DOCTOR!
Sulfuric acid safety
FIRE FIGHTING ACUTE HAZARDS TYPES OF HAZARD
NO water. In case of fire in the surroundings: powder, foam, carbon dioxide
Not combustible. Many reactions may cause fire or explosion. Gives off irritating or toxic fumes (or gases) in a fire.
FIRE
In case of fire: keep drums, etc., cool by spraying with water but NO direct contact with water.
Risk of fire and explosion on contact with base(s) , combustible substances , oxidants , reducing agents or water .
EXPLOSION
Sulfuric acid safety
Packaging & labeling
Storage Spillage disposal
Unbreakable packaging; put breakable packaging into closed unbreakable container. Do not transport with food and feedstuffs. Note: B C symbol R: 35 S: 1/2-26-30-45 UN Hazard Class: 8 UN Packing Group: II
Separated from combustible and reducing substances, strong oxidants, strong bases, food and feedstuffs , incompatible materials . See Chemical Dangers. May be stored in stainless steel containers.
Store in an area having corrosion resistant concrete floor
. Keep container tightly closed. Keep container in a cool, well ventilated area.
Stop leak if without risk. Absorb with inert material. Do not get water inside container. Do not touch spilledmaterial. Use water spray curtain to divert vapor drift. Use water spray to reduce vapors. Prevent entry intosewers, basements or confined areas; dike if needed. Neutralize the residue with a dilute solution of sodium
carbonate .
Environmental considerations
Prevent from entering in public sewers or the immediate environment.
Do not empty into drains, dispose of this material and its container to hazardous or special waste collection
Point according to Hazardous Waste Regulations.
Personal Protective Equipment :
Full Face Breathing mask, Chemical resistant coverall.Neoprene gloves, Chemical safety shoes
Labels and symbolsMASDS and symbols must be
available.Sulfuric acid English label.pdfSulfuric Acid Arabic label.pdf
Labeling
NFPA
SULFURIC ACID NFPA
Hazard Material Identification SystemHMIS
HMIS
Sulfuric acid HMIS
Placards symbols
Class 8 – Corrosives.
Attention Concretes made of cement are highly alkaline
with pH values normally above 12.5 and are not easily attacked by acidic solutions. As the pH of the solution decreases the equilibrium in the cement matrix is being disturbed, and the hydrated cement compounds are essentially altered by hydrolytic decomposition which leads to the severe degradation.
Taking sample from sulfuric truck to detect the iron in sulfuric sample, Rust is an iron oxide, usually red oxide formed by the redox reaction of iron and oxygen in the presence of water or air moisture.
Thanks