D:\A
NDY\J D\
PERTANIKA
JOURNALS\P
ERTANIKA (
F o r m s)
\FORMS - 2
015\##
Manu
scri
pt SUB
MISS
ION GU
IDE
rev.8-
2015
.doc
P a g e | 1 of 14
Thank you for choosing Pertanika as your preferred journal.
Copyright © 2015-16 Pertanika. All Rights Reserved.
NOTE: PLEASE READ THE INFORMATION GIVEN IN THIS GUIDE CAREFULLY BEFORE SUBMITTING YOUR MANUSCRIPT TO PERTANIKA.
REVISED: |11/06/2015
Manuscript Submission GuideThis guide contains 12 pages and has the following items:
1. Sample of a Cover Letter (all submissions must be accompanied by a cover letter)2. Important Information Sheet (summarized information for manuscript
submission).3. Reference List for Scope of the Journal.
MANUSCRIPT SUBMISSION GUIDE | Ver.8 – June 2015 Updated 11/06/2015 17:11:00
P a g e | 2 of 14PERTANIKA | COVER LETTER SAMPLE [MANUSCRIPT SUBMISSION GUIDE] ver.8 – Jun 2015
18 January 2015
Dr. Nayan Deep S. KANWALChief Executive Editor (Pertanika Journals)Journal Division, UPM PressOffice of the Deputy Vice Chancellor (R&I)1st Floor, IDEA Tower IIUPM-MTDC Technology CentreUniversiti Putra Malaysia43400 Serdang, Selangor, Malaysia
Dear Dr. Kanwal,
Submission of Paper to Pertanika Journal
I wish to submit my regular article for intended publication in Pertanika Journal of Tropical Agricultural Science (JTAS) [replace name of the journal as appropriate] for your kind consideration.
I declare that the work submitted for publication is original, previously unpublished, and not under consideration for publication elsewhere. I also certify that all the authors have approved the paper for release and are in agreement with its content.
Below are the particulars of my paper being submitted to you for publication:
Title Surface hydrophobin inhibits immune recognition of airborne fungal spores
Names of all the author(s) as in publication(as per APA style)
WASHINGTON, G., ROY, G., & BROWN, J.
Address WHITE ROSE EAST ASIA CENTRE, DEPARTMENT OF EAST ASIAN STUDIES UNIVERSITY OF LEEDS, LEEDS LS2 9JT U.K.
Please note that the figures/ photos submitted with my paper are to be reproduced in color/ monotone (circle as appropriate). As requested, I have also attached the Manuscript Submission Kit (forms), Copyright form, Language Editing certificate and the Manuscript softcopy (in MS Word) together with this letter.
I would be grateful if my article is considered favourably.
Sincerely,
George WASHINGTON(The letter must bear the original pen-to-paper signature and then scanned)
P a g e | 3 of 14PERTANIKA | IMPORTANT INFORMATION [MANUSCRIPT SUBMISSION GUIDE] ver.8 – Jun 2015
Important informationSuggested Format for the 1st four pages of manuscript for publication in Pertanika journal:
NOTE: Manuscripts to be submitted to Pertanika must strictly follow the format below.
1st page : Should contain only the running Title of the paper. (The shortened title meant for the running header of your article ).
2nd page : Should contain the full Title of the paper + all Authors’ names + the Corresponding author’s name, along with his/her full mailing address, email & hand phone number(s).
3rd page : Full Title of the paper + Abstract & Key words. (List up to eight key words to be used for indexing)
(do not include authors’ names or affiliation on this page).4th page : Introduction onwards…...
(Please note that the line spacing should be 1.5 throughout ).
Page Numbering
: All pages in the manuscript MUST be numbered.
(pl do not split your manuscript into 4 different files)
File Names
: Naming your Files (softcopies) (Please use the following convention when naming the files you wish to send)
a) Cover letter : The file name should contain <name of the journal + 0000, followed by your full name, and type of the file and current date. e.g. “<JTAS-0000-2012> Your Name (CVR LTR)_Date”
b) Forms : e.g.“<JTAS-0000-2012> Your Name (MS KIT)_Date”
c) Manuscript : e.g. “<JTAS-0000-2012> Your Name (ORG MS)_Date”
Please email the softcopy of your manuscripts, together with the manuscript submission kit, to the Chief Executive Editor at <[email protected]> and c.c. to <[email protected]>.
English Language EditingPertanika emphasizes on the linguistic accuracy of every manuscript published. Thus all authors are required to get their manuscripts edited by professional English language editors.
Author(s) must provide a certificate confirming that their manuscripts have been adequately edited. A proof from a recognised editing service should be submitted together with the cover letter. All costs will be borne by the author(s).
P a g e | 4 of 14PERTANIKA | IMPORTANT INFORMATION [MANUSCRIPT SUBMISSION GUIDE] ver.8 – Jun 2015
Thank you.
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
1/06
/201
5
P a g e | 5 of 14
SCOPE of the JOURNAL(Reference List for Tropical Agricultural Science)
1 = MAIN SUBJECT AREA, 2 = SUB SUBJECT AREA, 3 = SUBJECT AREA SPECIALISATION.
Journal of Tropical Agricultural Science (JTAS)
1. AGRICULTURAL SCIENCES2. Animal production
3. Animal growth & developmentAnimal healthAnimal husbandryAnimal nutritionAnimal pests & pathogensAnimal reproductionBreeds and breeding
2. Aquaculture3. Aquatic environment
Diseases of aquatic organismsFarming of aquatic organismsHusbandry of aquatic organisms
2. Crop and pasture production3. Agronomy
Crop nutritionCrop pathologyFarm mechanisationPasture nutritionPasture physiologyPlant pests & pathogensPlant protectionPre and post harvest technologies
(transportation & storage)Soil fertilityWeed sciences
2. Fisheries sciences3. Fisheries ecology and conservation
Fisheries sciencesMarine bio products synthesisMarine fisheriesOil spill bioremediationOrnamental/ aquarium fish and plantsRecreational fisheries
2. Food and nutrition development3. Biochemical processing
CrystallisationDevelopment of speciality productFood emulsion productsFood industryFood SciencesImprovement of finish productsNutrition value and benefitsPilot testing and technologyResource-based industry
2. Forestry sciences3. Agro forestry
BreedingDiseasesEnvironmentFire managementForest managementForest productsHabitat managementPestsRubber
SilvicultureSoil and land improvementWildlife managementWood & non wood-based forest productsWood science
2. Horticulture3. Floriculture
Fruit cropsOenologyOrnamental horticulturePlantation cropsPomologyVegetable culture
2. Plant physiology3. Crop modelling and assimilation
Crop physiologyCrop-water relationshipPasture physiologyPhysicochemical assimilationPlant and water relationPost harvest physiologyRadiation interceptionSeasonal fruit types
2. Soil and water sciences3. Applied hydrology
DrainageIrrigationPlant nutritionSoil & land degradationSoil biologySoil chemistrySoil fertilitySoil physics
2. Veterinary sciences3. Anaesthesiology
AntigenAvianBacteriologyClinical scienceEpidemiologyImmunochemistryImmunologyMedicineObstetrics & theriogenologyParasitologyPathologyPharmacologyPhysiologyRadiologySurgeryTherapeuticsVirologyWildlife & zoo animal diseases
1. BIOLOGICAL SCIENCES2. Biotechnology
3. Agricultural biotechnologyBiochemical
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
1/06
/201
5
P a g e | 6 of 14
BiocontrolBiopesticidesBiosynthesisBiotransformationCell culture technologyCryopreservationDNA probes technologyEnzyme technologyImmunologyIndustrial biotechnology and food sciencesMarine biotechnologyMedical biotechnologyMicrobial biotechnologyMicropropagation techniquesPlant and animal biotechnologyTissue cultureVaccine productionVaccine technology
2. Biochemistry3. Carbohydrates
LipidsNucleic acidsPathwaysPeptidesProteins
2. Botany3. Plant pathology
Plant taxonomyPsychology
2. Ecology3. Freshwater ecology
LimnologyMarine ecology
2. Genetic engineering3. Bio safety
Gene IsolationGene probesGene sequencingGene transformationMolecular biologyTransgenic studies
2. Genetics and molecular biology3. Cytogenetics
HeredityMolecular cell biologyMolecular geneticsPopulation geneticsRecombinant DNA techniques
2. Microbiology3. Bacteriology
MycologyParasitologyVirology
2. Zoology3. Anatomy
Animal taxonomyEntomologyEthnologyHistologyImmunologyNeurobiologyPhysiology
1. MARINE SCIENCES3. Algae biotechnology
Marine biologyMarine chemistry
PS: Information regarding your manuscript’s MAIN SUBJECT AREA, SUB SUBJECT AREA, and SUBJECT AREA SPECIALISATION based on the above list must be provided on Page 1 of your Manuscript Submission Kit.
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
1//0
6/20
15
P a g e | 7 of 14
SCOPE of the JOURNAL(Reference List for Science & Technology)
1 = MAIN SUBJECT AREA, 2 = SUB SUBJECT AREA, 3 = SUBJECT AREA SPECIALISATION.
Journal of Science & Technology (JST)
1. APPLIED SCIENCES AND TECHNOLOGIES2. Aerospace technologies and engineering
3. Advance materials-composite special alloysAeronautical engineering aerodynamicsRemote sensing
2. Educational technology3. Computer Assisted Instruction (CAI)
Computer base trainingWeb base courses
2. Energy industry3. Biomass energy technology
Natural gas technologySolar energy technology
2. Industrial design3. Design engineering
2. Manufacturing and process technologies and engineering
3. CAD/CAM systemsManufacturing technologiesMaterial processing technologyRobotics & mechatronicsStructural/ architectural
2. Nuclear technology3. Ionising radiation technology
Non-ionising radiation technologyRadiation processing
2. Resource-based industry3. Food industry
MineralsOilPetroleumRubberWood & non wood-based forest products
2. Water technology3. Control devices
Water retaining structuresWater treatment chemicals
1. CHEMICAL SCIENCES2. Analytical chemistry
3. Analytical nuclear chemistryBioassay methodsChemical & physical methodsComputational chemistryTrace chemical analysis
2. Inorganic chemistry3. Bioinorganic chemistry
Main group chemistrySolid state chemistryTransition metal chemistry
2. Organic chemistry3. Bio-organic chemistry
Organic chemical synthesisPhysical organic chemistry
2. Physical chemistry3. Chemical thermodynamics
Chemistry of catalysis
ElectrochemistryNanotechnologyPolymer chemistryStructural chemistrySurface chemistryTheoretical chemistry
2. Speciality chemicals3. Fine chemical
Novel chemicalsRadiation chemistryRadiochemistryRare metal recovery
1. EARTH SCIENCES2. Atmospheric sciences
3. ClimatologyMagnetosphere physicsMeteorology
2. Geochemistry3. Exploration geochemistry
Inorganic geochemistryIsotope geochemistryOrganic geochemistry
2. Geology3. Geochronology
MineralogyPetroleum geologySedimentologyStructural geologyVolcanology
2. Geophysics3. Atmospheric physics
EarthquakeElectromagnetism & GeomagnetismGeomechanicsGravity
2. Hydrology3. Ground water hydrology
Hydraulic systemSurface water hydrology
2. Oceanography3. Biological oceanography
Chemical oceanographyPhysical oceanography
1. ENGINEERING SCIENCES2. Agriculture engineering
3. Agriculture farm structureBy-product utilisation Irrigation engineeringSoil water engineeringPharmaceutical
2. Chemical engineering3. Biomedical engineering
Catalyst chemicalsChemical engineering designChemical/ physical modificationFluid mechanics
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
1//0
6/20
15
P a g e | 8 of 14
Industrial chemicalsProcess simulation
2. Civil engineering3. Foundation engineering
Geotechnical engineeringSafety engineeringInfrastructural engineeringSurveying
2. Electrical and electronic engineering3. Communication engineering
Electrical engineeringIntegrated circuitsMultimedia engineeringPower engineering
2. Environmental engineering3. Sanitary engineering
2. Food engineering3. Food engineering unit operations
Food plant and machinery designFood process control & automationFood transfer processPackaging technology
2. Maritime technology3. Marine engineering
Ocean engineeringOffshore engineering
2. Mechanical and industrial engineering3. Automotive engineering
Combustion and fuel engineeringHydraulic engineeringIndustrial engineeringMechanical engineeringMechanisation for crop alterationMechanisation in harvesting
2. Mechanisation and design engineering3. Agricultural mechanisation
Automotive engineeringInstrumentation and controlInterface designMachinery designProduction engineeringSystem modelling
2. Mining and mineral processing3. Geomechanics
Mining engineeringPetroleum engineeringReservoir engineering
2. Nuclear engineering and radiation technology3. Nuclear engineering
Safety assurance 1. ENVIRONMENTAL SCIENCES
2. Environment technology/ industry3. Biodegradable packaging
Environmental friendly products and technologies
Gaseous treatmentGeographical Information System (GIS)IncinerationLandscape technologyOrganic waste treatmentPollution control productsPollution sensing devicesWater and wastewater treatment technology
2. Environmental issues and assessment3. Air pollution
Health impactsHeavy metal wasteIndustrial gasesIndustrial wastewaterOzone depletion
Sound pollutionWasteWastewaterWater pollution
2. Environmental management and bioremediation3. Bioprocess technology
Catchment managementDrinking water quality standardEnvironment standardEnvironmental impactPollution controlSolid waste managementWaste bioremediationWaste management
2. Environmental studies3. Aquatic environment
Environmental protectionRemote sensingNatural ecosystemNutrient removal processSediment transport and sittingWater quality simulation modellingWater resources study
1. INFORMATION, COMPUTER & COMMUNICATION TECHNOLOGIES
2. Communication3. Asynchronous Transfer Mode (ATM)
Broadband networksBroadcastingDigital systemsDigital wireless communication and
technologiesEthernetIntegrated Service Digital Network (ISDN)Microwave communications technologyOptical systemsPhotonic systemsRadio communicationsRemote sensingRF component design and engineeringRoutersSatellite communicationsSoftware developmentVideo conferencingVirtual Private Network (VPN)
2. Current information technology3. Digital image processing
Digital signal processing & applications2. Hardware
3. Arithmetic structuresData communicationsDisplay devicesInput devicesIntegrated circuitsMicroelectronicsMobile communication devicesMultimedia systemsProcessor designRadio Frequency design (RF design)Wireless devices
2. Information systems3. Artificial Intelligence (AI)
Cognitive scienceComputer Aided Design (CAD)Computer Aided Manufacturing (CAM)Computer graphicsCryptographyData warehouseExpert SystemGeographic Information System (GIS)
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
1//0
6/20
15
P a g e | 9 of 14
Image processingInformation systems managementMultimediaParallel processingRoboticsSecurity systemVirtual Reality (VR)
2. Security system3. Biometrics security system
Expert systemsNeutral NetworkSmart systemWeb technologyWeb-TV (Internet TV)
2. Software3. Computer languages
Computer aided systemGeographical Information System (GIS)Operating systemsProgramming techniquesSimulation systemSoftware engineering
1. MATERIAL SCIENCES2. Electronic materials
3. Catalysis and surface chemistryCoating MaterialsElectrochemical materialsMagnetic materialsMinimisation of hazardous materialsSemiconductor materialsSuperconductor materials
2. Functional materials3. Electronic and electro-optical materials
Magnetic materialsOptical materials
2. New materials and technologies3. Ceramics
Composite materialsHydrometallurgyMetallurgyMetals and metal alloy materialsNon-destructive testingOptical materialsPhysical metallurgyPolymer alloy materialsPolymer compoundsTextile compounds
2. Polymeric materials3. Inorganic polymers
MembranesPolymer composites
1. MATHEMATICAL SCIENCES2. Applied mathematics
3. AlgorithmsArtificial intelligenceComputational theoryDifferential equationsFuzzy logicNumerical analysis
2. Pure mathematics3. Algebraic structures
Geometry Number theory
2. Statistics3. Applied statistics
Probability theory Statistical theory
1. MEDICAL AND HEALTH SCIENCES2. Clinical sciences
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
1//0
6/20
15
P a g e | 10 of 14
3. AllergiesAnaesthesiaArthritisCardiologyChild healthDentistryDermatologyEndocrinologyFetal developmentFetal medicineGastroenterologyGeriatricsGynaecologyHearing therapyHaematologyInfectious/ communicable diseasesMedical geneticsNeonatologyNephrologyNeurologyObstetricsOccupational therapyOncologyOphthalmologyOptometryOral surgeryOrgan imagingOrthopaedicsOtolaryngologyPathologyPaediatricsPharmaceuticalsPsychiatryRadiologyRadiotherapyRehabilitationReproductionRespiratory diseasesRheumatologySpeech therapySurgeryTherapyUrologyVaccine productionVenereology
2. Health care system, industries and technologies3. Biomechanics
Emergency medicineHealth legislationHealth rehabilitation serviceHuman resource developmentInnovative technologyMedical biotechnologyMedical technologyQuality of life
2. Health services research3. Bioethics (human)
Education (health)Health & community servicesHealth systems managementMortality and morbidity studiesNursing
2. Immunology3. Allergy
Cellular immunologyHumoral immunologyImmunochemistryImmunogeneticsTransplantation immunologyTumour immunology
2. Medical biochemistry and clinical chemistry3. Carbohydrates
LipidsNucleic acidsPeptidesProteins
2. Medical microbiology3. Bacteriology
MycologyParasitologyVirology
2. Neurosciences3. Autonomic nervous system
Cell receptorsCellular nervous systemCentral nervous systemMechanism of tissue damageMolecular characterisationSensory systems
2. Nutrition3. Clinical epidemiological
LaboratoryToxicology
2. Pharmaceutical industry3. Botanical pesticides
PhotochemicalPurification technologyScreening technologySynthesis technology
2. Pharmacology3. Clinical pharmacology
Medical pharmacologyPharmaceutical fieldPharmaceutical researchPharmaceutical technologyPharmacyRadiopharmacologyRadiotoxicologyTherapeuticsTraditional medicine and natural product
2. Physiology3. Cell physiology
Comparative physiologyExercise/ physical fitnessHuman biophysicsStress physiologySystems physiology
2. Public health, environmental & occupational health & safety research
3. Air qualityDrinking water qualityEnvironmental protection & health impactEpidemiologyFood qualityHealth & safety (occupational)InjuriesMental healthPreventive medicinePrimary health careRadiation health & safetySolid waste management
1. PHYSICAL SCIENCES2. Acoustic and optical physics
3. AcousticsLiquid crystal displayQuantum opticsSensors
2. Astronomical sciences3. Astronomy
AstrophysicsCosmic ray physics
2. Atomic, molecular, nuclear, particle and plasma
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
1//0
6/20
15
P a g e | 11 of 14
physics3. Atomic physics
Electrical dischargesFluids physicsMolecular physicsNuclear physicsParticle physicsPlasma physics
Radiation physics2. Solid state physics
3. Surface physics2. Theoretical and condensed matter physics
3. Condensed matter physicsCrystallographyTheoretical physics
PS: Information regarding your manuscript’s MAIN SUBJECT AREA, SUB SUBJECT AREA, and SUBJECT AREA SPECIALISATION based on the above list must be provided on Page 1 of your Manuscript Submission Kit.
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
8/01
/201
3
P a g e | 12 of 14JSSH SCOPE | REFERENCE LIST [MANUSCRIPT SUBMISSION GUIDE] ver.8 – Jun 2015
SCOPE FORM(Reference List for Social Sciences & Humanities)
1 = MAIN SUBJECT AREA, 2 = SUB SUBJECT AREA, 3 = SUBJECT AREA SPECIALISATION.
Journal of Social Sciences & Humanities (JSSH)
1. SOCIAL SCIENCES2. Accounting
3. Accounting educationAccounting information systemAccounting regulationAuditingFinancial accountingHuman resource accountingInternational accountingIslamic accountingIT and accountingManagement accountingTaxation
2. Anthropology3. Cultural anthropology
EthnographyIndigenous peoplesMinority groupsOrang AsliPhysical anthropologySocial anthropology
2. Archaeology and history3. Archaeology and classical study (Asian or
otherwise)Marine archaeologyPrehistory
2. Architecture and habitat3. Architecture & urban environment
Housing issuesLandscape managementPublic issuesRural environmentTown & country planningUrban planning & management
2. Consumer and family economics3. Consumer education and empowerment
Consumer issues (health, food, housing, safety, etc)
Consumer law, protection and policyConsumer satisfaction and wellbeingConsumerism and consumer movementConsumption economicsElderlyFood and nutritionGender and development Personal and family financePoverty and family economic wellbeingSustainable consumptionTime use and household production
2. Economics3. Agricultural economics
EconometricsEconomic historyEconomic modelling & forecastingEconomic theoryEnvironmental economicsHealth economicsIndustrial economics
International economicsIslamisation of economic institutionsLabour economicsNatural resource economicsPublic financeRegional economicsResource economics
2. Education3. Corporatisation
Curriculum developmentDistance learningEducation managementEducation structureEducation systemEducational psychologyEducational sociologyEducational technologyEthics & moral educationHistory of educationLife-long educationNon-formal educationPhilosophy of educationPre-school educationPrivate and public educationSociology of educationTeacher educationTertiary education
2. Finance3. Banking
Capital marketCorporate financeFinance companiesFinancial engineeringInsuranceInternational financeIslamic bankingIslamic financeOff-shore financeVenture capital
2. Geography3. Economic geography
Environmental geographyHuman geographyNatural resourceRegional geographySocial & cultural geographyTransportation economicsUrban studies
2. Law3. Administrative law
Commercial lawConstitutional lawContract lawCopyrightsCriminal lawCustomary lawCyber lawEnvironmental lawFamily law
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
8/01
/201
3
P a g e | 13 of 14JSSH SCOPE | REFERENCE LIST [MANUSCRIPT SUBMISSION GUIDE] ver.8 – Jun 2015
Intellectual propertyInternational lawIslamic family lawJurisprudenceLabour lawMaritime lawPatentsSyariah law
2. Management studies3. Agribusiness
Agricultural managementCrisis & risk managementEntrepreneurial studiesEntrepreneurshipEnvironmental managementHuman Resource Development (HRD)Human Resource Management (HRM)Industrial relationsInternational business managementManagement information systemMarketingMultimedia managementOperational managementOrganisational studiesStrategic managementTotal Quality Management (TQM)
2. Media and communication studies3. Advertising
BroadcastingCensorshipFilmInformation studiesInternational communicationInterpersonal communicationJournalismLibrarianshipMedia impactPolitical communicationPublic relationTelecommunication
2. Political sciences and public policy3. Conflict resolution
Comparative politicsFederalismForeign policyInternational relationsLocal government studiesPolicy studiesPublic policy & administrationStrategic studies
2. Population studies3. Demography
Fertility trendsMigrationMortality trendsPopulation policy
2. Psychology3. Abnormal psychology
Biological psychologyClinical psychologyCognitionComparative psychologyCounsellingDevelopmental psychologyIndustrial psychologyIslamic psychologyNeuropsychologyOrganisational psychologyPerformancePersonalityPsychopharmacology
2. Sociology
3. Class studiesCriminologyDevelopmental sociologyEthicsEthnic/ race relationsFuture studiesGender studiesImpact studiesIndustrial sociologyNation buildingSocial classes and stratificationSocial policySocial theorySocial work and administrationUrban studies
2. Technology management3. Appropriate technology
Intellectual property rightsR&D managementS&T managementTechnology and assessmentTechnology and civilisationTechnology and developmentTechnology and lawTechnology commercialisationTechnology policy studiesTechnology transfer
2. Tourism3. Community development
DevelopmentEco-Tourism studiesHeritage managementHospitality managementImpact studiesLeisure studiesPark & recreationPublic policySocial culturalSupport servicesTourism & economyTourism & technologiesTourism & transportTourism facilitiesTourism planning
1. HUMANITIES2. Arts and culture
3. Ceramic artsCostumesDesign studiesDramaFilming traditionIslamic calligraphyMetal handicraft arts and traditionPopular cultureTheatreTraditional architectureTraditional arts & cultureTraditional performing artsVisual artsWeaving, batik and dress traditionalWood carving tradition
2. Dance3. Modern dances
Traditional/Classical dances2. Historical and civilisation studies
3. BiographyCultural historyEmergence of the third worldForeign policyHistory of civilisationsPrehistory of Southeast Asia
Our goal is to bring high quality research to the widest possible audience
REV
ISED
: | 1
8/01
/201
3
P a g e | 14 of 14JSSH SCOPE | REFERENCE LIST [MANUSCRIPT SUBMISSION GUIDE] ver.8 – Jun 2015
2. Language and Linguistics3. Anthropological linguistics
Applied linguisticsCognitive linguisticsComputational linguisticsComputer assisted language learningContextual linguisticsCritical discourse analysis; rhetoric; philosophyDiscourse studiesEvolutionary linguisticsHistorical linguistics Language acquisitionLanguage disordersLanguage teachingLexicographyLinguistic variationLiterary theoryMalay languageMalaysian languagesMorphologyNeurolinguistics PhoneticsPhonologyPragmaticsPsycholinguisticsSemanticsSociolinguisticsStylisticsSyntaxTESOL(Teaching English to speakers of other
languages)Theoretical linguisticsTranslationOthers
2. Literature3. Asian literature
Comparative literatureCreative Writing
Cultural StudiesEnglish literatureGenders and SexualitiesGenre–drama, literatureLiterary theory and criticismMalay literatureMalaysian literatureMulticultural and Colonial, Postcolonial studiesNarrative– Postcolonial literaturePoetry–American and British poetryOthers
2. Music3. Modern music
Traditional/classical music2. Philosophy
3. Applied philosophyEthicsHistory & philosophyMetaphysicsSocial philosophy
2. Religious studies3. Comparative religion
Missionary & propagation studiesReligion & civilisationReligion and modernisationReligious educationReligious issues
2. Sports3. Coaching
Physical educationSportsSports historySports managementSports psychologySports recreationSports researchSports science Sports sociology
PS: Information regarding your manuscript’s MAIN SUBJECT AREA, SUB SUBJECT AREA, and SUBJECT AREA SPECIALISATION based on the above list must be provided on Page 1 of your Manuscript Submission Kit.