Roller General
Shells:
Shafts:
Bearing Housing:
STEEL ROLLER DATA SHEET
• Roller Out of Balance (Max):• Roller Concentricity (T.I.R) – Max:• Roller Rotating Mass (Average):• Roller Breakaway Mass (Average):• Roller Straightness:
0.028 Nm 0.65 mm 4.5 N 2.1 N Within 1.0mm in a metre length
• Material:• Material Standard:• Material Minimum Yield Strength:
Precision Hard Drawn Bright Bar Q235B or #20 240 MPa
• Material:
•
Material Standard:•Material Minimum Yield Strength:
High Speed Conveyor Roll (HSCR) Q235B or Q345B 240 MPa or 350 Mpa•
Standard Shell Range & wall thickness: Ø101.6 x 4.0 mm Ø114.3 x 4.0 mm Ø127.0 x 4.0 mm Ø152.4 x 4.0 mmØ177.8 x 5.0 mm
• Material:• Material Thickness:• Weld Detail:
SPCC Cold Roller Sheet 3.2 mm Housing is internally welded to the shell.
• Coal (Surface/Underground)• Ports• Salt• Steel• Hard Rock (Gold, Copper, Platinum, Iron Ore, etc)
INDUSTRIES
SERVED
• Fertilizer• Sugar• Sand & Gravel• Aggregate
• Crushed Stone• Preparation Plants• Cement• Grain
• Load Out Facilities• Potash• Mobile Crushing• Chemical
Idler Natural Rubber Impact Discs
Bearings:
Lubrication
Sealing:
pg 2 of 2
• Material:• Tensile Strength:• Elongation at Break:• Durometer Hardness:• Rubbers Markings:
Abrasion resistant vulcanised rubber 13 MPa minimum 350% minimum 58 to 68 shore A at 20°C ‘RUBBER’ or ‘FRAS’
• Bearing Manufacturer:• Bearing Type:• Standard Bearing Range:• Max. allowable angular deflection:• Bearing fatigue life minimum:
FAG or other reputable Japanese Brand. Deep Groove Roller Bearings – double shielded 6204, 6205, 6305, 6306, 6307, 6308, 6309. 10 minutes 100,000 hrs (trough and return rollers) 40,000 hrs (impact rollers)
• Seal Manufacturer:• Seal Type (Inner):• Seal Type (Outer):
BBCP Nylon (FRAS Double Labrynth Seal) Metal (Dust Seal)
Surface Treatment:
• Manufacturer:• Type and Grade:
BP Energrease L S EP 2
• Electrostatic powder coating
• Galvanised Steel• Inorganic Zinc Coating
• Stainless Steel
• Natural Rubber Lagged• FRAS Rubber Lagged
STEEL ROLLER DATA SHEET
Mail: PO Box 403 Ingleburn NSW Address: 7 Phiney Place Ingleburn NSW 2565Phone: +61 2 9618 9400 | Email: [email protected] www.bellebannecp.com.au | www.facebook.com/BBConveyorProducts ABN 12 137 362 497
CONTACT US: