Spray Control Systems
LIGHTWEIGHT POLY FENDERS WITH FEATURES THAT CONTROL SPRAY
AND WITHSTAND HARSH ROAD CONDITIONS!
FLEETENGINEERS.COM2
When the rubber meets the road, Spray MasterTM is there. Fleet Engineers’ Spray Master fenders are one of the most comprehensive spray suppression offerings available in the commercial vehicle market today.
Spray Control Systems
INJECTION MOLDED PLASTIC POLYMERS
All Spray Master fenders are made from injection molded plastic polymers which
optimize weight-to-strength ratios and exhibit extraordinary durability.
Injection molding allows for variable geometries throughout the design of the
fender and allows for the addition of unique product features and the optimization of
material thickness in high stress areas.
FR-22Full-Round
Spray MasterStationary mount style for
use with 22.5/24.5 tires.
FRX19 & FRX 22Full-Round
Spray Master SlideTrax mount style for use with 19.5 and
22.5/24.5 tire size
WIDE SPECTRUM OF COLORS AVAILABLEFour standard colors available (shown above). Additional
custom colors are available with minimum purchase. Contact your Fleet Engineers representative for details.
RD
GY
WT
BK Includes a Lifetime Warranty
Engineered to optimize weight-to-strength ratios
Structural underside ribs and side valances manage spray
Advanced mounting systems and accessories
Key Features
Full-Round Fenders (FR and FRX Series)
3
The most comprehensive line of poly fenders on the market today.
Double-Radius Fenders (DR and DRX Series)
Single-Radius Fenders (SR and SRX Series)
SR-22Single-Radius Spray Master
Stationary mount style for use with 22.5/24.5 tire size
SRX-22Single-Radius Spray Master SlideTrax mount
style for use with 22.5/24.5 tire size
DR-22Double-Radius Spray Master Stationary mount style for use with 22.5/24.5 tire size
DRX-22Double-Radius
Spray Master SlideTrax mount
style for use with 22.5/24.5 tire size
LIGHTWEIGHT, RUST-FREE CONSTRUCTION
The lightweight, rust-free material increases cargo capacity, improving
load-to-run efficiency.
NUMEROUS ACCESSORIES
Further enhance the look and performance
with accessories and trim options.
STRUCTURAL RIBS and SIDE VALANCESSpray Master fenders are designed
to include side valances and molded ribs on the underside
of the fender to provide superior spray suppression, achievable through the use of
our injection molding process.
MOUNTING OPTIONSThe Spray Master brand of fenders is
available in two mounting variations; the stationary mount support and the SlideTrax
mount support systems, each with their own unique features and benefits.
1-800-333-7890
FLEETENGINEERS.COM4
We offer compatible mounting hardware for all Spray Master fenders. Our Quick Picks comprise of the complete bracketry and hardware needed for your fender set. With Quick Picks, you can simply select Economy, Standard or Premium kits that include every washer, nut, bolt and bar to fit your fender, your vehicle.
Spray Control Systems
Choosing your Spray Control Solution is as easy as 1, 2, 3!
SlideTrax Mount Supports provide a faster, drill-free installation with 7” of adjustability providing mistake-proof alignment.
Stationary Mount Supports maximizes installation accuracy by allowing the installer to attach the mounting hardware in the exact location required.
Once you’ve selected your fender, choose from our Quick Picks mounting solutions to easily ensure your mounting hardware is the best choice for your selection.
Pick Your Fender Choose SlideTrax or Stationary Supports
Select Your Mounting Hardware1 2 3
Economy Quick Picks
Standard Quick Picks
Premium Quick Picks
Fender Models
Full Round available in two sizes for use with 19.5 or 22.5/24.5 tires
Single Radius For use with
22.5/24.5 tire sizes
Double Radius For use with
22.5/24.5 tire sizes
SlideTrax Mount Style FRX Series SRX Series DRX Series
Model Name FRX-19 FRX-22 SRX-22 DRX-22
End Mount Position Top Mount Top Mount Below Mount Below Mount
End Tubes Diameter 1.375” 1.875” 1.375” 1.375”
Center Mount Tubes Diameter N/A N/A 1.375” and 1.875” 1.375” and 1.875”
Traditional Stationary Mount Style FR Series SR Series DR Series
Model Name FR-22 SR-22 DRX-22
End Mount Position Top Mount Top Mount Top Mount
End Tubes Diameter 1.875” 1.875” 1.875”
Center Mount Tubes Diameter N/A 1.375” and 1.875” 1.375” and 1.875”
Precise installation in a fraction of the time!
We’ve identified and offer the most comprehensive line of fenders compatible with many different applications – choose the one that’s right from you!
Full-Round Fenders
Single Radius Fenders
Double Radius Fenders
5
Mounting HardwarePrecise installation in a fraction of the time!
Both of the mount styles above allow for the fenders to be easily removed and reinstalled by
loosening the set screw at the top of each support!
When it comes to installing your fenders, Fleet Engineers makes it effortless with two options to choose from – each offering quick and easy fender removal and re-installation. Each mount support includes one set screw; tighten it to install your fenders, loosen it to remove them!*
and Stationary Mount Supports: Flexibility and stability where you need it most.
*SR and DR Series fenders have additional mounting requirements.
Stationary Mount SupportsThe Stationary Mount Support is a two-piece, injection-molded attachment packaged separately from the fender, maximizing installation accuracy by allowing the installer to mount them in the exact location required. Each stationary mount is attached using a set of four bolts, nuts and washers for a snug and secure fit. The bottom portion of this two-piece support fits within the molded ribs on the underside of the fender and acts like a safeguard to prevent the bolts pulling through the fender. The top mounted piece accepts the tube that attaches to the frame rail.
SlideTrax Mount SupportsSlideTrax Mount Supports provide a faster, drill-free installation – up to 10 times faster than traditional mounts! The high impact composite clamps adjust along a notched channel on both sides of the fender. Each provides 7" of adjustability for simple, mistake-proof alignment. Simply slide the clamp into the desired mount location within the channel and lock it in place with a firm push.
Experience the SlideTrax Advantage!SlideTrax is the quickest and most efficient fender mounting approach.Available on all Fleet Engineers FRX, SRX and DRX fender models.
SRX Series
Hidden Cross-Tube Aerodynamic feature for a clean, debris-free look.
FRX Series
Easily slide to desired mount location and lock into teeth with a firm push.
1-800-333-7890
FLEETENGINEERS.COM6
Optional AccessoriesLet us help you choose the right solution for your operation.
A la carte mounting solutions are available for your custom needs!
Our Customer Service Team is available to assist in selecting the perfect mount configuration for your fender application.
Replacement parts are easy to identify and available for Fleet Engineers to send to you if the need arises!
Call us today at 800-333-7890 to help create the perfect configuration for your operation!
QuickPicks
Economy
Economy Quick Picks packages are fully warrantied, and fully
functional. They do the job, and are our lowest price option.
Standard
Standard Quick Picks packages are custom designed for every fender, and they have been fleet tested in
hundreds of field applications.
Premium
Premium Quick Picks packages offer premium distinctions – like stainless steel, additional offsets
or greater adjustability.
To configure your Quick Picks solution for your fender, please visit fleetengineers.com or contact our Customer Service Team.
Full Round QuickPicks shown above. All fender model QuickPicks are shown online.
7
A multitude of optional accessories are available to further enhance the look and performance of your Spray Master fenders. From stainless steel inserts, which add a touch class, to brush kits which help to further decrease spray, Fleet Engineers’ selection of Spray Master accessories allows you to customize your fenders to your specific needs.
Customize your fender systemwith these available options.
Optional Accessories Available by Fender Model
Conspicuity End-Mount
Plate
Offers reflective
DOT-C2 tape to be easily attached to
most mounts.
Spray Suppression
Brush
Flexible filament
attaches to fender to
reduce spray
Decorative Stainless
Steel Strips
Dresses up your FR-19 or FR-22
fenders.
Fender
Connectors
Connect two consecutive fenders for a seamless
appearance.
Mud Flap
Just the right size for your fender,
providing maximum spray
control.
Mud Flap Reinforcing
Strap
Provides easy installation
and necessary flap support.
Rectangular Reflectors
and Holders
Attaches to your
FR-19 to add additional reflective
material onyour rig.
FR-22 • • • • •FRX-22 • • • • •
FR-19 • • • • • •FRX-19 • • • • • •
SR-22 • • •SRX-22 • • •
DR-22 • • •DRX-22 • • •
Optional Accessories
1-800-333-7890
1800 EAST KEATING AVENUE MUSKEGON MICHIGAN 49442 231-777-2537 800-333-7890 FAX: 231-773-5500
FLEETENGINEERS.COM
Driving Forward
Aerodynamic Solutions Door Systems Spray Control Truck & Trailer Parts & Accessories
PRODUCT LINE SOLUTIONS
Fleet Engineers designs, manufactures and distributes comprehensive product line
solutions for aerodynamics, door systems, spray control and truck and trailer parts
and accessories designed to perform in the most demanding conditions. Every one
of our products comes with our promise to always provide the best quality products,
personalized service and competitive pricing possible.
Look for the Fleet Engineers brand through our network of distributors, dealers and OEMs across North America, or visit us at fleetengineers.com
to learn more about how we are driving solutions to the trucking industry.
You Can Expect More
LIT-
5010
6/B-
1216