Download - Solar energy 1
NAME:D.BALAJICONTACT:
DEP:I.C.E YEAR: 1ST
Sri ramPolytechnic college
Perumalpattu thiruvallur dist. Pin code:602 024
Resent trent in SOLAR ENERGY
SOLAR
ENERGY
Solar energy is a one of the source which
convertslight energy into direct
electrical energy
Working The solar rays fall on the top layer of p-type semiconductor the electrons from valence band get promoted to the conduction band and cross the P-N junction . there is potential difference between two is created. Hence the current is generated
Simply put, efficiency refers to the process of converting light energy to electrical energy by the PV panel.
Construction :
they require little maintenance and have a long lifetime. Compared to other renewable sources they also possess many advantages
The most common type of PV panel today is manufactured from silicon.
There are several variants on silicon-based PV panels such as crystalline and non-crystalline.
Crystalline silicon PV panels currently dominate the market, with nanocrystalline silicon being the most common.
GENERAL FACTS
Solar Energy is better for the environment than traditional forms of energy.
Solar energy has many uses such as electricity production and heating of water through photovoltaic cells and directly for drying clothes.
Solar energy can also be used to heat, cook food ,swimming pools, power cars, for attic fans, calculators and other small appliances. It produces lighting for indoors or outdoors.
Facts about Solar Energy systems:
•A home solar system is typically made up of solar panels, an inverter, a battery, a charge controller, wiring and support structure.• 1-kilowatt home solar system consists of about 10-12 solar panels and requires about 100 square feet of installation area.• kilowatt home solar system will generate approximately 1,600 kilowatt hours per year in a sunny climate (receiving 5.5 hours of sunshine per day) and approximately 750 kilowatt hours per year in a cloudy climate (receiving 2.5 hours of sunshine per day).
Organic and thin-layer PV cells
Organic solar cells use carbon-based polymers based upon molecules such as fullerenes
while thin-layer silicon PV employ additional light-trapping techniques with a thinner silicon layerOrganic cells, however, have efficiencies of less than 10% and need to be improved before they are viable for commercial use.
Advantages
They are particularly useful where there is no national grid and also where there are no people such as remote site water pumping or in space.
Solar cells are use in calculators, electronic watches, radios and T.V
Solar cells are also used in store energy in Ni-Cd batteries and Lead-acid batteries
The most common type of PV panel today is manufactured from silicon.
A schematic of a PV cell. Sunlight passing through the glass (grey) and anti-reflective layer (yellow) strikes the p-type silicon (blue), releasing free electrons from the silicon atoms in that layer.
The electrons are attracted to the positively-charged n-type silicon (red).
Connecting the cell to an electrical circuit through the electrical contacts (green) will provide electrical energy to drive a load (e.g. light bulb).
The most common type of PV panel today is manufactured from silicon. There are several variants on silicon-based PV panels such as crystalline and non-crystalline
“Integrating a high-quality film of silicon nanoparticles 1 nanometer in size directly onto silicon solar cells improves power performance by 60 percent in the ultraviolet range of the spectrum,”
Nanoparticles can improve efficiency
Solar panels, shown here, are used to
generate electricity for a small town near
Tempe.
Current Limitations of Solar Panels
The various silicon PV panels differ in their efficiency.
How to Use Solar Energy at Night?
Molten salts can store the sun's heat during the day and provide power atnight
t
Thank
youDONE BY:
D.BALAJI