-
ISSUED : JULY 2012
A
F
B
C
D
E
GSL Index Index ......................................................................................... Page 01
ProfilesSpecification Pages .................................................................. Page A02-A06Technical Information ............................................................... Page A07-A09Scale Profile Drawings ............................................................. Page A10-A16
AccessoriesPhotos & Drawings .................................................................. Page B01-B16
SectionsScale Elevations ...................................................................... Page C01-C15
Statics.................................................................................................. Page D01-12
Construction Drawings1 - Corner Jointing & Punch Tool Preps.................... Page E02-E062 - Drainage............................................................... Page E073 - Locking Hardware................................................. Page E08-E094 - Sash Assembly, Gaskets & Glazing..................... Page E10-E145 - Coupling............................................................... Page E15
Sawing TablesCutting Information ................................................................... Page F01-04
Main Index
GSL
GSL
GSL
GSL
GSL
GSL
Slide 2000
-
ISSUED : JULY 2012
Specification
GENERAL DESCRIPTION
The Slide 2000 system is suitable for patio doors as well as horizontal sliding widows and achieves excellentU values inline with the current Building Regulations.
The system is suitable for replacement windows/doors in existing buildings and for installation into newbuildings.
Slide 2000 provides the option of multi-point locking for patio doors and single point-locking for horizontalsliding windows.
Assembly of the outerframe is with mechanical cleats for which the holes are prepped using punch tools &sashes are screwed together around the glass and gasket.
Slide 2000
RECOMMENDED DESIGN LIMITATIONS
Maximum Sash Weight: 200kg (using ACGSL505 rollers)Maximum Sash Height: 2100mmMinimum Sash Height: 382mmMaximum Sash Width: Providing sashes are within the above limitations there is no maximum width
Please see pages D01-D03 for more guidance on vent sizes & limitations.
-
ISSUED : JULY 2012
Specification
Slide 2000
PROFILE SPECIFICATION
The frames are constructed of aluminium alloy extrusion to BS EN 755-9 and BS EN 12020, extruded from6063 T6 alloy. The internal and external extrusions are separated with a polyamide thermal break.
The external aluminium alloy extrusion is pre-treated and finished either:-
a) Anodised to BS 3987: 1987, grade AA25 to a natural self colour.
b) Polyester powder organic coating to BS 6496. Dual colour is available.
GENERAL MANUFACTURING
Outer frames are made by cutting the frame profiles with accurate 45 mitred ends using Tungsten CarbideTipped Saw Blades, operating at approximately 3000 rpm.
The corner joints can be made using mechanically fixed corner cleats by punching the corners using therelevant punch tooling shown in section E of this manual. All joints should be sealed using ACSIL04 sealant
The sash joints are made using self tapping stainless steel screws. The holes for which can be made usingthe relevant punch tooling shown in section E of this manual.
All sash members are built around the glazing and gasket.
On polyester powder coated finishes, great care should be taken to avoid getting gap sealer on visiblesurfaces and should be removed as soon as possible with a clean cloth.
Care should be exercised when using products not supplied by Smart Systems Ltd as no responsibility canbe accepted.
-
ISSUED : JULY 2012
Specification
Slide 2000
VENTS
The glazing gasket should be wrapped around the unit and finished with a neat butt joint to the middle at thetop of the unit. The joint should then be glued using a fast-acting sealant.
Horizontal rails are coated with ACSIL04 small gap sealant and tapped into position on the double glazedunit using a rubber mallet to avoid distorting the profile. Vertical profiles are then tapped into position usingthe same method. Any excess sealant should then be carefully removed.
The joints are made using self tapping stainless steel screws. The holes for which can be made using therelevant punch tooling shown in section E of this manual.
DRAINAGE
As with all dry glazed systems, it is recommended that the profiles are adequately drained and ventilated.Refer to drainage details in section E of this manual, if in doubt, ask the Technical Department.
In order to get maximum performance and weather resistance it is recommended that drips are used over allvents.
OUTER FRAME MANUFACTURING INFORMATION
The outer frame members are cut with 45 mitred ends to the overall size required, measured to the longestpoint of the metal.
Corners are formed by coating the cut faces to be joined with ACSIL04 small gap sealer and by applyingACSIL013 cleat glue into the cleat chamber. Into the mitred corner insert the required corner cleats and,where required, the aluminium corner chevrons. The two mitred ends are then brought together andmechanically joined. The small gap sealer ensures a permanent joint and guards against the ingress ofmoisture and joint movement. After joining the corners, special care should be taken to ensure any excesssealer is removed from painted surfaces.
-
ISSUED : JULY 2012
Specification
Slide 2000
LOCKING
The vertical members should be prepped for the locking mechanism prior to fabrication and fitted beforeassembly. Stainless steel fixings shall be used for securing the locking mechanism and keeps in position.
GLAZING
Glass is secured in position using a wrap around gasket with the vent profiles assembled around the unit.
Glazing can be 24mm, 28mm or 32mm by selecting the relevant gasket.
Slide 2000 Weather Performance (BS6375-1)
BS EN 1026: 2000 Air Permeability: TBABS EN 1027: 2000 Watertightness: TBABS EN 12211: 2000 Resistance to Wind Load: TBA
Slide 2000 U Values
Please refer to the Smart Systems' Document L White Paper or contact the Technical Department.
-
ISSUED : JULY 2012
Specification
Slide 2000
-
ISSUED : JULY 2012
GSL1010 377 212A10 6.5 1XX
YY
-----14.80
-----6.78
Number Picture Page Perim.mmMec.mm
Length Packpr. MF SA KL HP Mlx(cm4) ly(cm4)wx(cm3) wy(cm3)
MFSAKLHP
= Mill Finish= Silver Anodised= Basic Colour= Special Colour
GOZ = GoldW = WhiteZ = Black
A = OutsideB = Inside
M = Dual Colour
Slide 2000
GSL1012
GSL020
GSL021
GSL030
GSL040
GSL050
GSL051
387 159A11 6.5 1-----5.28
-----3.27
380 141A12 6.5 1-----6.21
-----2.94
349 145A13 6.5 1-----5.30
-----2.64
228 84A14 6.5 1-----1.67
-----0.93
- -A14 6.6 1------
------
- -A14 6.6 1------
------
PVC & EPDM
X
X
YY
X
X
YY
X
X
YY
X
X
YY
X
X
YY
X
X
YY
X
X
YY
GSL022 418 160A12 6.5 1-----7.20
-----4.13
X
X
YY
595 289A10 6.5 1-----26.28
-----10.40
BA
PVC
-
ISSUED : JULY 2012
GSL310 170 83A15 6.5 1YY
XX
-----1.39
-----0.59
Number Picture Page Perim.mmMec.mm
Length Packpr. MF SA KL HP Mlx(cm4) ly(cm4)wx(cm3) wy(cm3)
MFSAKLHP
= Mill Finish= Silver Anodised= Basic Colour= Special Colour
GOZ = GoldW = WhiteZ = Black
A = OutsideB = Inside
M = Dual Colour
GSL053 - -A14 6.6 1------
------
A19
A19
X
X
YY
GSL1330 248 162A15 6.5 1-----7.38
-----3.83
Slide 2000
PVC & EPDM
ETC157N
ETC158N
X
X
YY
X
X
YY
278
6.5 1
6.5 1
A B
A B
GSL1130 653 271A16 5 1-----6.03
-----11.27
A B
GSL1131 570 253A16 5-----11.63
-----13.00
X
X
YY
X
X
YY
GSL122 474 216A13 6.5 1-----8.6
-----6.27
X
X
YY
A B
GSL1335 215 127A15 6.5 1-----3.66
-----3.83
Y
Y
XX
Y
Y
XX
1
-
ISSUED : JULY 2012
Number Picture Page Perim.mmMec.mm
Length Packpr. MF SA KL HP Mlx(cm4) ly(cm4)wx(cm3) wy(cm3)
MFSAKLHP
= Mill Finish= Silver Anodised= Basic Colour= Special Colour
GOZ = GoldW = WhiteZ = Black
A = OutsideB = Inside
M = Dual Colour
DV515
VG52
VG53
ETC178 XX
YY
98A18 6.5 1
ETC179 XX
YY
348A19 6.5 1
A B
A B
85.2A18 6.5 1-----7.8
-----6.8
X
X
YY
Stainless Steel
PVC
-A17 6.5 1------
------
-A17 6.5 1------
------
X
X
YY
X
X
YY
Slide 2000
DV559 20.6A18 6.5 1-----4.2
-----1.2
X
X
YY
VL75
VL72
VG90
X
X
YY
X
X
YY
X
X
YY
32A17 6.5 5------
------
-A17 6.5 10------
------
77A17 6 6------
------
-
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
ISSUED : JULY 2012
GSL1010Two Track Outer Frame
GSL1012Three Track Outer Frame
ACSL013A ACSL013A
ACSL013A ACSL013A ACSL013A
73
47
70
122
125
47
-
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
ISSUED : JULY 2012
ACSL084
GSL020Top & Bottom Rail
71
20
1
4138
44.5
33
-
ISSUED : JULY 2012
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
GSL022Standard Locking Stile
33
4438
642017.5
33GSL021
Narrow Locking Stile
73.52017.5
4438
-
ISSUED : JULY 2012
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
GSL030
41
2070
20
38
ACGSL084
Mid Rail
73.5
44 33
33
20.5
38
GSL122Reinforced Locking Stile
End CapACGSL123
2017.5
-
ISSUED : JULY 2012
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
GSL053
29
33.5
3221
1330
.5
GSL040Meeting Stile Section
PVC Interlock
GSL050
500 12 500 12 500
516
30
16
30
GSL051
Channel Infill
Cill Channel Infill
-
ISSUED : JULY 2012
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
45
35
20
GSL310
9420
36.5
Interlock
20
35
69.5
GSL1335Reinforced Interlock
GSL1330Reinforced Interlock
2020
-
ISSUED : JULY 2012
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
GSL1130 Mid-Rail for Letter Plate
GSL1131 Mid-Rail
124
41
124
41
-
ISSUED : JULY 2012
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
VG52 VG53
12
56
PVC
PVC Infill Stainless Steel Track
VG90Coupling Piece
VL75Coupling Piece
VL72
15
21.5
Weather Drip
End Caps:ACVL059Rivets:ACVL061
-
ISSUED : JULY 2012
Scale 1:1
ISSUED : JULY 2012
Primary Visible Side Secondary Visible Side
Slide 2000
ETC178
31
25
85
End CapWTA037
ACET040
DV559
7020
DV515
70
42
42mm Head Extension
20mm Head Extension
-
25 25
31 31
150
190
ETC157N150mm Cill
ETC158N190mm Cill
End CapACET157
End CapACET258
AC
ET04
0
AC
ET04
0
ISSUED : JULY 2012
Scale 1:1
Primary Visible Side Secondary Visible Side
Slide 2000
31
225
25
ETC179NB:This Profile Only -SCALED TO FIT
AC
ET04
0
End CapACET179
-
ISSUED : JULY 2012
Scale 1:1
ISSUED : JULY 2012
Primary Visible Side
Scale 1:1
-
Slide 2000
Section B
-
ISSUED : JULY 2012
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACSL013A
Mechanical Cleat
GSL1010GSL1012
124
eachpack
ACSL180
Cast Handle Set
GSL022ACGSL1174ACMX01615
1 each
ACSL181
Aluminium Handle Set
1 each
ACSL182
Dummy Handle Set forACSL180
GSL022ACGSL1174
1 each
ACSL183
Dummy Handle Set forACSL181
GSL022ACGSL1174
1 each
GSL022ACGSL1174ACMX01615
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL020
End Caps for Rail Cut Out
GSL310GSL1330
1 pack
ACGSL021
End Caps
GSL0211 pack
ACGSL022
End Caps
GSL0221 pack
ACGSL032
24mm Glazing Gasket
GSL020GSL021GSL022GSL030GSL310GSL1330
25 m
ACGSL032G
24mm Glazing Gasket -Grey
GSL020GSL021GSL022GSL030GSL310GSL1330
25 m
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL033
28mm Glazing Gasket
GSL020GSL021GSL022GSL030GSL310GSL1330
25 m
ACGSL033G
28mm Glazing Gasket -Grey
GSL020GSL021GSL022GSL030GSL310GSL1330
25 m
ACGSL034
32mm Glazing Gasket
GSL020GSL021GSL022GSL030GSL310GSL1330
25 m
ACGSL034G
32mm Glazing Gasket -Grey
GSL020GSL021GSL022GSL030GSL310GSL1330
25 m
ACGSL040
End Cap
GSL0401 each
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL061
Infill Gasket
GSL040150 m
ACGSL042
Woolpile
GSL020GSL021GSL022
100 m
ACGSL045
Drainage Cover Cap
GSL1010GSL1012
100 pack
ACGSL061G
Infill Gasket - Grey
GSL040150 m
ACGSL080
Screw
GSL040100 pack
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL084
Sash Screw
GSL020GSL021GSL021CSL030
100 pack
ACGSL304
Guide to Locate LockingStile to Outer Frame
GSL1010GSL1012GSL021GSL022
2 pack
ACGSL1170
Fixing Plate
ACGSL1174ACSG071GSL040
ACDV265
12 each13 4
25
ACGSL1030
Interlock Plugs(One Pair Per Pack)
GSL1010GSL1012
1 pair
ACGSL1050
Corner Blocks to JoinGSL050 & GSL051
GSL1010GSL1012GSL050GSL051
24 pack
17
27.5
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
ACGSL1171
Fixing Plate forACGSL1174 keep
ACGSL1174ACET122
10 each18 4
25
MFSAKLHPM
GOZWZ
PC
ACSGL1174
Multi-point Lock
Can be cut down to600mm leaving twolocking points
GSL022ACSL180ACSL181
1 Each
1410
600
20.5
34.5
1280
MFSAKLHPM
GOZWZ
PC
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL400
26mm Spindle & Screwsfor Single Side HandleFixing
1 pack
ACGSL1330
End Cap for GSL1330
GSL133010 pairs
ACGSL408ACGSL409ACGSL426ACGSL427
ACGSL1180
Screw Cover Cap
ACGSL1174ACET122
10 each
9.9
5.5 12.5
9.9
ACGSL1335
End Cap for GSL1335
GSL133510 pairs
MFSAKLHPM
GOZWZ
PC
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL405
Handle Anti-Rotation Pin
10 pack
ACGSL406
External Handle
1 each
ACGSL408
Internal Handle
1 each
ACGSL409
Internal Handle
1 each
ACGSL409ACGSL426
ACGSL401ACGSL408ACGSL409ACGSL425ACGSL426ACGSL427ACGSL601ACGSL602ACGSL603ACGSL604
ACGSL400ACGSL401ACGSL406ACGSL601ACGSL602ACGSL603ACGSL604ACGSL400ACGSL401ACGSL405ACGSL406ACGSL601ACGSL602ACGSL603ACGSL604
ACGSL401
47mm Spindle & Screwsfor Back to Back HandleFixing
1 pack ACGSL406ACGSL408ACGSL409ACGSL426ACGSL427
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL425
Handle Accessory
10 pack
ACGSL426
Internal Handle(composite)
1 each
ACGSL427
Internal Handle
1 each
ACGSL502
Adjustable Single Roller
Max. Weight:80kg per/sash
4 pack
ACGSL406
ACGSL400ACGSL401ACGSL405ACGSL406ACGSL601ACGSL602ACGSL603ACGSL604
ACGSL501
Fixed Single Roller
Max. Weight:80kg per/sash
4 pack
ACGSL400ACGSL401ACGSL406ACGSL601ACGSL602ACGSL603ACGSL604
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
ISSUED : JULY 2012
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL503
Fixed Double Roller
Max. Weight:160kg per/sash
4 pack
ACGSL504
Adjustable Double Roller
Max. Weight:160kg per/sash
4 pack
ACGSL505
Adjustable ReinforcedDouble Roller
Max. Weight:200kg per/sash
2 pack
ACGSL601
Single Point Lock (minframe height = 382mm)
(2 x ACGSL655 keepsrequired)
1 each
ACGSL602
Two Point Lock (min frameheight = 744mm)
(3 x ACGSL655 keepsrequired)
1 each ACGSL655GSL021
ACGSL655GSL021
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
ISSUED : JULY 2012
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACGSL603
Three Point Lock (minframe height = 1250mm)
(4 x ACGSL655 keepsrequired)
1 each
ACGSL604
Three Point Lock withEurocylinder (min frameheight = 1250mm)(4 x ACGSL655 keepsrequired)
1 each
ACDV265
M4 x 60 CSK Screw
1 each GSL022GSL040
ACGSL1171
ACDV264
M4 x 35 CSK Screw
1 each GSL021GSL040
ACGSL1171
ColourImage Part Code Pack Unit Application ColourImage Part Code Pack Unit Application
ACGSL655GSL021
ACGSL655GSL021
ACGSL655
Keep
1 each ACGSL601ACGSL602ACGSL603ACGSL604GSL1010GSL1012GSL040
-
ISSUED : JULY 2012
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ColourImage Part Code Pack Unit Application
ACET060
No. 7 x 25 S/S Self TappingCSK Screw
ACGSL1174100 pack
ACET122
M4 x 10 Machine Screw
100 pack10
25
ACET068
No. 8 x 8 S/S Self TappingFlange Headed Screw
ACGSL1174100 pack8
10 pack ETC157NETC158NETC178ETC179
ACET040
Variable Angle Cill Joiner
ACET041
Cill Nose Bracket
Screws = ACET067
ETC157NETC158NETC179
1 each
-
ISSUED : JULY 2012
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
ColourImage Part Code Pack Unit Application
ACMX01615
35/35 Cylinder
1 each ACGSL1174ACSL180ACSL181
ACMX854
Cleat Tensioning Block
ACSL013A48 pack
ACET190 4.3 x 45mm CSK S/S Polyamide Screw
1000 packMFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ACMX01601
30mm Half Cylinder
1 each ACGSL604
ACMX01603
40mm Half Cylinder
1 each ACGSL1174ACSL180ACSL181
8
-
ISSUED : JULY 2012
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
Slide 2000
MF = Mill Finish GOZ = GoldSA = Silver Anodised PC = Polished ChromeKL = Basic Colour W = WhiteHP = Special Colour Z = BlackM = Dual Colour
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
MFSAKLHPM
GOZWZ
PC
ColourImage Part Code Pack Unit Application
ACSG071
M4 x 40 CSK Screw
ACSGL1171ACSGL1174
1 each
ACGSL910
Punch Tool
Please see Section E forapplication.
GSL1010GSL1012GSL021GSL022GSL310GSL1330
1 each
ACVG74
30/30 Cylinder
1 each ACGSL1174ACGSL601ACGSL602ACGSL603ACGSL604
ACGSL911
Punch Tool
Please see Section E forapplication.
GSL1010GSL1012GSL021GSL022GSL310GSL1330
1 each
ACVG48
Door Stop/Buffer
1 each
J
M
F
H
ACGSL910
D
K
L
E
G
C
A B
N
OP
Q
TS
W
ACGSL911
V
-
ISSUED : JULY 2012
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
ACMX09700 1 each
Alu. Polish
ACMX09761 1 each
Maxi Gloss
ACMX09762 1 each
Alu. Bright
ACMX09763 1 each
Teflon Spray
ACMX09764 1 each
Maxi Clean
MF = Mill Finish M = Dual ColourSA = Silver Anodised GOZ = GoldKL = Basic Colour W = WhiteHP = Special Colour Z = Black
Slide 2000
X
-
ISSUED : JULY 2012
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
ACMX09765 1 each
Alu. Cleaner
ACMX09770 1 each
Roll & Wrap 100mm
ACMX09775 1 each
Grip Handwrap
ACMX09801 1 each
Protective Tape 50mm
ACMX09802 1 each
Protective Tape 70mm
MF = Mill Finish M = Dual ColourSA = Silver Anodised GOZ = GoldKL = Basic Colour W = WhiteHP = Special Colour Z = Black
Slide 2000
-
T-BARSACVG65=2.5mmACVG66=3.0mmACVL150=4.0mm
Screw (Grub)
ColourImage Part Code Pack Unit Application
MFSAKLHPM
GOZWZ
MFSAKLHP
MFSAKLHPM
GOZWZ
MGOZ
WZ
MFSAKLHPM
GOZWZ
MFSAKLHPM
GOZWZ
ISSUED : JULY 2012
ACMX09803 1 each
Protective Tape 100mm
ACMX09830 1 each
Rubber Sealant
ACSIL04 1 each
Sealing Glue
ACSIL08 1 each
Silicon Gun
ACSIL013 1 each
Glue for Mitre
MF = Mill Finish M = Dual ColourSA = Silver Anodised GOZ = GoldKL = Basic Colour W = WhiteHP = Special Colour Z = Black
Slide 2000
XX
-
Slide 2000
Section C
1
2
3 4
5
6
3 4 8
1
2
7 4 4
9
-
ISSUED : JULY 2012
Detail 1A
Do Not Scale From This Drawing
Slide 2000
3871
109
70
41 41
1420
9
ACGSL033
GSL020
GSL1010ACGSL045
ACGSL042
GSL051
ACGSL50*
ACSL013A ACSL013A
28 28
ACGSL042
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Detail 1B
ETC157N
ACET040
(END CAPS: ACET157) ACSIL04
ACSI
L04
25
ACET041
3871
109
41 41
1420
9
ACGSL033
GSL020
GSL1010GSL051
ACGSL50*
ACSL013A ACSL013A
28 28
ACGSL042
-
Do Not Scale From This Drawing
ISSUED : JULY 2012
Detail 2A
Slide 2000
3871
109
70
41 41
209
ACGSL033
ACGSL042
GSL020
GSL1010
ACGSL042
GSL050
VG52 VG52
11
ACSL013AACSL013A
28 28
14
ACVL061
VL72
-
Do Not Scale From This Drawing
Slide 2000
ISSUED : JULY 2012
3871
151
41 41
209
ACGSL033
GSL020
GSL1010
ACGSL042
GSL050
VG52 VG52
11
ACSL013AACSL013A
28 28
14
ACVL061
VL72
42
DV515ACET190
Detail 2B
-
Do Not Scale From This Drawing
ISSUED : JULY 2012
Slide 2000
Detail 3A
GSL021
GSL1010
GSL050
ACGSL033
ACGSL042
ACGSL042
VG52
39 64
103
8 2014
70
44
47
AC
SL01
3AA
CSL
013A
28
ACET060ACGSL60*
ACDV264
ACGSL406
Note: GSL021 is the locking stile for horizontal windows only. Please see page E08 for locking details.
-
Do Not Scale From This Drawing
Slide 2000
ISSUED : JULY 2012
Detail 3B
GSL022
ACGSL042
39 73.5
112.5
8 2014
44
ACGSL042
GSL050
VG52
70
47
ACET060
ACSG071
Cylinder = ACMX01615 (35/35 or 30/10/30)
GSL1010
AC
SL01
3AA
CSL
013A
ACGSL1170
ACGSL1174
ACGSL033
28
-
Do Not Scale From This Drawing
ISSUED : JULY 2012
Slide 2000
GSL310
GSL310
GSL053GSL053
35
20
14
35
20
14
95.5
ACGSL033
28
ACGSL033
28
17.5
Detail 4A
ACET068
ACET068
5
-
Do Not Scale From This Drawing
Slide 2000
ISSUED : JULY 2012
GSL1330
GSL053GSL053
3814
193.
5
GSL1330
ACGSL033
28
ACGSL033
2819
Detail 4B
ACET068
ACET068
End Cap =ACGSL1330
End Cap =ACGSL1330
-
Do Not Scale From This Drawing
ISSUED : JULY 2012
Slide 2000
Detail 4C
GSL1335
GSL1335
GSL053GSL053
35
20
14
35
2014
145
ACGSL033
28
ACGSL033
28
17.5
ACET068
ACET068
End Cap =ACGSL1335
End Cap =ACGSL1335
-
Detail 6A
Do Not Scale From This Drawing
Slide 2000
ISSUED : JULY 2012
3871
109
122
41 41
1420
9
GSL1012ACGSL045
GSL051
VG53
41
ACGSL042
GSL051
GSL
020
11 11
GSL
020
GSL
020
ACGSL50* ACGSL50* ACGSL50*
ACSL013A ACSL013A ACSL013A
28 28 28
ACGSL033
Note: GSL1012 can be used with ETC158N & ETC179 sub-cills only.
Detail 5
-
Do Not Scale From This Drawing
ISSUED : JULY 2012
Slide 200037
.571
109
122
41 41
1420
9ACGSL042
GSL020
GSL050
41
ACGSL042 ACGSL042
ACGSL033
GSL050
GSL020GSL020
VG52 VG52 VG52
11 11
Detail 6
ACSL013AACSL013AACSL013A
GSL1012
28 28 28
ACVL061
VL72
-
Do Not Scale From This Drawing
Slide 2000
ISSUED : JULY 2012
GSL021
GSL1012
GSL050
ACGSL042
VG52
39 64103
8 2014
44
122
GSL050
VG52
AC
SL01
3AA
CSL
013A
AC
SL01
3A
47
ACGSL033
28
Detail 7A
ACET060
ACGSL655
ACGSL60*
ACDV264
ACGSL1170
ACGSL406
Note: GSL021 is the locking stile for horizontal windows only. Please see page E08 for locking details.
-
Do Not Scale From This Drawing
ISSUED : JULY 2012
Slide 2000
GSL022
ACGSL042
39 73.5
112.5
8 2014
44
ACGSL042
GSL050
ACET060ACGSL1174
Cylinder = ACMX01615 (35/35 or 30/10/30)
GSL1012
GSL050
VG52122
GSL050
VG52
AC
SL01
3AA
CSL
013A
AC
SL01
3A
47
ACSG071
ACGSL1170
ACGSL033
28
Detail 7B
-
Do Not Scale From This Drawing
Slide 2000
ISSUED : JULY 2012
GSL021
GSL021
ACGSL042
ACGSL061
GSL040
8
1420
64
ACGSL033
ACGSL033
564
17.5
14 20
133
44
4428
28
Details 8A
AC
ET19
0
-
GSL022
GSL022
ACGSL042
ACGSL061: to be usedabove and below keep
GSL040
8
1420
73.5
ACGSL033
ACGSL033
573
.5
17.5
14 20
152
44
44
AC
SG07
1
Cylinder: ACMX01615 (35/35 or 30/10/30)
ACGSL1171ACET122
AC
GSL
1174
AC
ET19
0
ACGSL1170
Slide 2000
ISSUED : JULY 2012
28
Detail 8B
-
Slide 2000
ISSUED : JULY 2012
GSL122
GSL122
ACGSL042
ACGSL061: to be usedabove and below keep
GSL040
8
1420
73.5
ACGSL033
ACGSL033
573
.5
17.5
14 20
152
44
44
AC
SG07
1
Cylinder: ACMX01603 (40 or 30/10)
Detail 8C
ACGSL1171ACET122
AC
GSL
1174
ACGSL1170
28
Note: Handles can only be on the inside using GSL122
AC
ET19
0
-
GSL03070
1420
ACGSL033
41
14 20ACGSL033
41
28
28
Slide 2000
ISSUED : JULY 2012
Detail 9A
-
GSL1130
124
1420
.5
ACGSL033
41
14 20.
5
ACGSL033
4128
28
Slide 2000
ISSUED : JULY 2012
Detail 9B
-
1420
.5
ACGSL033
41
14 20.
5
ACGSL033
41
124
GSL1131
28
28
Slide 2000
ISSUED : JULY 2012
Detail 9C
-
Slide 2000
Section D
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Ixx = 30.53 cm4fmax = B/200 & B < 15 mm
H
W
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
GSL021
GSL040
GSL021
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
H
W
Ixx = 34.44 cm4fmax = H/200 & H < 15 mm
GSL022
GSL040
GSL022
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
H
W
Ixx = 7.59 cm4fmax = B/200 & B < 15 mm
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
GSL310
GSL310
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Ixx = 7.59 cm4fmax = B/200 & B < 15 mm
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
H
W
GSL310
GSL310
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Ixx = 7.59 cm4fmax = B/200 & B < 15 mm
H
W
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
GSL310
GSL310
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
H
W
Ixx = 42.65 cm4fmax = B/200 & B < 15mm
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
GSL1330
GSL310
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
H
W
Ixx = 42.65 cm4fmax = B/200 & B < 15mm
GSL1330
GSL310
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
H
W
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
Ixx = 42.65 cm4fmax = B/200 & B < 15mm
GSL1330
GSL310
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
H
W
Ixx = 83.19 cm4fmax = B/200 & B < 15 mm
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
GSL1330
GSL1330
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Ixx = 83.19 cm4fmax = B/200 & B < 15 mm
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa
1000 Pa1250 Pa1500 Pa
H
W
GSL1330
GSL1330
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Ixx = 83.19 cm4fmax = B/200 & B < 15 mm
W
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
A(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
B(cm)
800 Pa
1000 Pa1250 Pa1500 Pa
GSL1330
GSL1330
H
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
H
W
Ixx = 20.42 cm4fmax = H/200 & H < 15 mm
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa
1250 Pa1500 Pa
GSL1335
GSL310
-
Do Not Scale From This Drawing
Slide 2000
ISSUED : JULY 2012
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
H
W
Ixx = 20.42 cm4fmax = H/200 & H < 15 mm
GSL1335
GSL310
800 Pa1000 Pa1250 Pa1500 Pa
-
Do Not Scale From This Drawing
Slide 2000
W
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
A(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
B(cm)
800 Pa
1000 Pa1250 Pa
1500 Pa
H
Ixx = 20.42 cm4fmax = H/200 & H < 15 mm
GSL1335
GSL310
ISSUED : JULY 2012
-
Do Not Scale From This Drawing
Slide 2000
H
W
Ixx = 33.26 cm4fmax = H/200 & H < 15 mm
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
800 Pa1000 Pa1250 Pa1500 Pa
GSL1335
GSL1335
ISSUED : JULY 2012
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
W(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
H(cm)
H
W
800 Pa1000 Pa1250 Pa1500 Pa
Ixx = 33.26 cm4fmax = H/200 & H < 15 mm
GSL1335
GSL1335
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
W
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
A(cm)100110120130140150160170180190200210220230240250260270280290300310320330340350
B(cm)
800 Pa1000 Pa1250 Pa1500 Pa
H
Ixx = 33.26 cm4fmax = H/200 & H < 15 mm
GSL1335
GSL1335
-
Section F
Slide 2000
Section E
-
ISSUED : JULY 2012
Outer Frame Corner Details & Punch Tooling
Do Not Scale From This Drawing
Slide 2000
1717
.5
65 11
1717
.5
6
511
8 8 GSL10128 8
1717
.5
6
5 1111
GSL1010
17 17.5
17.5
17
Coat Cut Face of Profilewith ACSIL04 Prior toMechanically Joining
ACSL013A
Centre Keep isfor alignment only
A BA BACGSL910 ACGSL910
J
M
F
H
ACGSL910K
L
E
G
A B
Apply Glue (ACSIL013) to all cleat apertures
Punch Tool Punch Tool
D C
-
ISSUED : JULY 2012
Sash Punch Tooling
Do Not Scale From This Drawing
Slide 2000
27
27
R3R3
5.55.5
5.5 5.527
3 327
27
27
R3R3
33
42.5
10
10
10C D W1010
10
42.5
4.5
10
4.5
1013
13 1010
ACGSL910C D
J
M
F
H
ACGSL910
D
K
L
E
G
C
N
OP
Q
U
TS
RW
V
ACGSL911
A B
Punch ToolACGSL911Punch Tool
GSL021 GSL022
GSL022 GSL021
GSL022 GSL021
GSL021 GSL022
Stile Top & Bottom Track Clearance
-
ISSUED : JULY 2012
Sash Punch Tooling
Do Not Scale From This Drawing
Slide 2000
N O P Q S T
O P
R3R3
27
27
27
R2R2
8
27
R2R2
8
Q
N
OP
Q
TS
W
V
ACGSL911
ACGSL911 ACGSL911Punch Tool Punch Tool
N
N
OP
Q
TS
W
V
ACGSL911 Cut-Out DetailO, P, S & T
Cut-Out DetailN & Q
GSL1330 GSL1330
GSL1330 GSL1330
Interlock Top & Bottom Track Clearance
GSL310 GSL310
S T
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
42.5
13
4.5 4.5
42.5
13
10 10
12.5 13
J
M
F
H
ACGSL910
D
K
L
E
G
C
A B
J K L M
E F G HACGSL910
J
M
F
H
ACGSL910
D
K
L
E
G
C
A B
ACGSL910
12.5 13
Punch Tool
Punch Tool
Interlock Screw Clearance Holes
Sash Punch Tooling
Prep DetailG, H, J & K
Prep DetailE, F, L & M
GSL310
GSL1330
GSL1330
GSL310GSL310
GSL1330
GSL1330
GSL310
-
Punch Tool
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
70 70
70 70
70 70
1.5 1.5 1.5 1.5
Cut out for top, middle & bottom rail connection
70
Stile/Interlock
Horizontal Rail
V
N
OP
Q
U
TS
RW
V
ACGSL911
V
V V
Sash Punch Tooling
GSL1330 GSL310
GSL021 GSL022
ACGSL911Punch Tool
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
100 30
ACGSL045
50
8
100 30
75
8
30
A
40
8
B
SASH
50
8
50
8
SASH
50
8
50
8
5ETC157N Shown
ACSIL08
ACSI
L04
with ACET157 end capCill end caps should be
sealed to cill to prevent wateregress over edge
GSL020
8 30
ACGSL045
8
6
5
ACGSL045 6
5
88
GSL1012
GSL1010
8
A B
C
C
ACGSL1030
ACGSL1030
12
Outside
Use recommendeddrill jig ACGSL9003
for 8mm hole
Drainage Detail
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Position ACGSL1030 under& above the interlockACGSL1030
ACGSL030 & GSL1050
Rubber Base
Plastic Insert
Self Adhesive Brush
Important Note:ACGSL1030 must be sealed in positionto prevent water from the externalchannel reaching the internal channel.
Position a drainage slot closeto the ACGSL1030
Outside
ACGSL1050
GSL051
GSL050
38
38
ACGSL1050
GSL050
GSL051
ACGSL1050 inserts allow GSL050 & GSL051to be square cut for easy installation on site.
Apply sealant to bottom & sidesbefore inserting rubber base
ACET290
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
70.5
6768
R9
R5.534
6
9.5
14
9.5
6
9.5
14
9.5
R9
R5.5
34
172
64.5
4364
.5
43
21.5
200
12.5
12.5
12.5
Opt
iona
l whe
n us
ing
AC
GS
L405
21.5
ACGSL408
ACGSL408
ACGSL401
ACGSL406
ACGSL425
ACGSL409
ACGSL400
ACGSL405
ACGSL409
GSL021/022 GSL021/022
GSL021/022 GSL021/022
A A
A-A
B B
B-B
12.5 2
222
32
44
64
29.5
133.
523
4
ACGSL405
ACGSL406
ACGSL425
ACGSL401
ACGSL400
ACGSL601ACGSL602
ACGSL603/604
Minimum OverallFrame Height
382744
1250
Lock
Onl
y w
hen
usin
g A
CG
SL6
04w
ith A
CV
G74
full
cylin
der
or A
CM
X01
601
half
cylin
der
Lock & Handle Preparation
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
ACGSL1170
35.521.5 82.5
92
56 128
14
34.5
19253
4.5
Top & bottom locking points are not shown
2519
13.5
ACSGL1174
GSL022
ACSG071
GSL022GSL040
ACET060
ACGSL304
ACGSL304 Centre guides should be spacedabove & below the keep to locate the locking
stile to the outer frame.
ACET060
ACGSL304
ACGSL304 Centre guides are not required forGSL040.
GSL1010GSL1012
GSL1010GSL1012
34.5
(10 req'd per keep)
12
(10 req'd per keep)
13.5
184
NOTE:1. ACGSL1174 can be used with
handles ACSL180-186 withACMX01615 cylinder
2. ACGSL1174 can be cut down to600mm keeping 2 locking points.
ACGSL1171 & ACET122
(12 req'd per lock)(12 req'd per lock)
13 13
154
ACSGL174 Lock Preparation
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
5
Begin laying the joint by the middle of the top transom
The joints should be cut in the corners except the visible parts
Paste the cut with fast-acting adhesive
ACGSL032 - 24 mmACGSL033 - 28 mmACGSL034 - 32 mm
1
2
3
4
Gasket Preparation
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
GSL020Top Rail
GSL020Top Rail
GSL030Transom/Mid Rail
GSL020Bottom Rail
GSL020Top Rail
GSL030Transom/Mid Rail
IMPORTANT NOTE: Use a rubber mallet to tap section around theunit to prevent deformation. A timber block could also be used tospread the impact of blows.
Sash AssemblySash Assembly
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
IMPORTANT NOTE: Use a rubber mallet to tap section around theunit to prevent deformation. A timber block could also be used tospread the impact of blows.
GSL020Top Rail
GSL030Transom/Mid Rail
GSL020Bottom Rail
GSL053Interlock
GSL020/21Stile Rail
Sash Assembly
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
ACGSL084
ACGSL084
ACGSL084
ACGSL084
ACGSL042
ACGSL020
ACGSL021
ACGSL021
ACGSL021
ACGSL020
ACGSL020
ACGSL084
ACGSL084
Sash AssemblySash Assembly
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
GSL310 / GSL1330 / GSL1335
GSL020
ACGSL084
ACGSL020
GSL053
Sealing required during assembly
1
3
2
Sash Assembly
7070
ACGSL50*ACGSL50*ACGSL084
ACGSL084
ACGSL084
ACGSL084
ACGSL021 ACGSL020
Cover cap mustslide into channel
ACGSL021 ACGSL020
Cover cap mustslide into channel
Place roller in plastic sleeveand slide into GSL020 as shown.
Hand tighten grub screw until assemblyis held secure in position.
-
ISSUED : JULY 2012
Slide 2000
GSL040
ACGSL040
ACGSL040
GSL021/GSL022/GSL122
GSL021/GSL022/GSL122
ACGSL040
GSL021 / GSL022 / GSL122
GSL040ACGSL040
ACET190
ACGSL040
Meeting Stile Preparation
ACET190
ACET190
Do not pre-drill forACET190 polyamide
screws
-
ISSUED : JULY 2012
Slide 2000
225235
45
22.5
22.5
39.5
4539
.5
GSL1130
GSL021/022
ACGSL1130
ACET070
ACET070
14 13.5
37.5
2837
.5 28
10
4.5
CL
GSL310/GSL1330
GSL1130
PUA028 PUA028
PUA028 PUA028
GSL1130
FIT FLUSH TO EDGE
124
Remove leg usingACET911 - Position V
Mid-Rail/Letterplate Preparation
ACGSL1180 ACGSL1180
-
ACSL030 Location
ISSUED : JULY 2012
Slide 2000
ACVG48
8.5
20.5
4.5
Opening distancedepends
on handle typeand customer
preference
ACVG48
ACET062
GSL020
GSL021/GSL022
ACVG48 Location
ACVG48
ACVG48
-
Typical Coupling Details
ISSUED : JULY 2012
Slide 2000
GSL1010
AC
SL01
3AA
CSL
013A
ETC619
AC
ET01
4A
CET
011
ETC052
SL7552 47
99
GSL050
GSL1012
GSL050
GSL050
AC
SL01
3AA
CSL
013A
AC
SL01
3A
AC
ET01
4A
CET
011
2
10
VG90
Cut down by 10mm as shown
ETC619
ETC052
SL75
ACET062
GSL1010
AC
SL01
3AA
CSL
013A
47
GSL1010
AC
SL01
3AA
CSL
013A
47
VL75
ACET062
ACET190
GSL1012
AC
SL01
3AA
CSL
013A
AC
SL01
3A
GSL1012
AC
SL01
3AA
CSL
013A
AC
SL01
3A
GSL050GSL050
GSL050
GSL050GSL050
GSL050
VL75
VL75
VL75
VL75
47 47
IMPORTANT NOTE: Always ensure the ixx/iyy values are suitable for the specific site application. If in doubt, please contact our Technical Department.
VG90
GSL1010GSL1010
AC
SL01
3AA
CSL
013A
VL75
ACET190
AC
SL01
3AA
CSL
013A
AC
SL01
3A
GSL050GSL050
GSL050
VL75
10
VG90
Cut down by 10mm as shown
VG90
47 4752.5 47
99
94
94 94
ACET190
ACET190
Typical Coupling Details
-
ISSUED : JULY 2012
Slide 2000
-
Section F
Slide 2000
Section F
-
ISSUED : JULY 2012
Cutting Information
Do Not Scale From This Drawing
Slide 2000
3838
H -
76H
5757
H -
190
1414
ACGSL042
GSL1010
ACGSL042
GSL051
ACGSL50*
ACSL013A ACSL013A
ACGSL042
GSL1010ACGSL042
GSL050ACSL013A ACSL013A
VG52 VG52
PROFILESGSL1010 2 HGSL1010 2 WGSL020 4 W/2-80.5
GSL021 2 H-78
GLASS SIZE(1)
W/2-92.5H-190
2X
1 W-76
1 W-76
2 W-90
GSL050
GSL051
2 H-78GSL310/1330/1335
VG52
(2)
W/2-102H-190
GSL022 2 H-78(1)(2)
2 H-78GSL053
(1)(2) GSL020 4 W/2-90
ACCESSORIES
ACGSL03*(G) H-1824ACGSL03*(G) W/2-84.54
ACSL013A 8
ACGSL084 16
ACGSL020 2ACGSL021 2ACGSL022 2(2)
ACGSL50* 4
ACGSL045 2
2 H-76GSL050ACGSL042 W/2-80.58(1)
(2) ACGSL042 W/2-908ACGSL042 H-784
ACGSL03*(G) W/2-944(2)(1)
(1)
Glazing Gasket
Screw For Rails
Interlock PlugsStile End Caps
Rollers
Drainage Cap
Woolpile
Corner Cleat
W
H
NOTE: Locking is not included above. For GSL021, pleaseadd preferred lock type & handles from section B.
GSL021
GSL1010
GSL050
ACGSL032ACGSL042
ACGSL042
VG52
VG52
14
70
AC
GSL
013A
GSL310
GSL310
GSL053GSL053
ACGSL032
ACGSL032
14
14
GSL021
GSL1010
GSL050
ACGSL032 ACGSL042
ACGSL042
VG52
VG52
14
WW/2 W/2
39 44
2.5
W/2 - 80.5 39442.5
W2 - 80.5
(1) W/2 - 92.53.5
89 893.5
(1) W/2 - 92.5(2) W/2 - 102 (2) W/2 - 102
4 H-90VG522 W-90VG53
(1) GSL021(2) GSL022
(1) GSL021(2) GSL022
ACGSL50*
ACGSL1174 1 Multi-Point Lock
ACSL18* 1 Handle
ACGSL1170 12 Fixing Block
ACSG071 12 M4 x 40 Lock Screw
ACET060 12 Screw for Keep
ACGSL1330/1335 End Cap For GSL1330/GSL13351 pair
ACMX01615 (SL) 1 35/35 Cylinder
Stile End Caps
Glazing Gasket
Woolpile
Glazing Gasket
Woolpile
ACGSL1030 1 Interlock PlugsACGSL1050 4 Corner Block To Join GSL050/051
Locking for GSL021
Locking for GSL022 per sash
AC
GSL
013A
AC
GSL
013A
AC
GSL
013A
ACGSL304 4 Sash Locator
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Cutting Information
209
GSL1012
ACGSL045
VG53ACGSL042
ACGSL032
GSL
020
GSL
020
GSL
020
ACGSL50* ACGSL50* ACGSL50*
ACSL013A ACSL013A ACSL013A
209
ACGSL042
GSL020
GSL050
ACGSL042 ACGSL042
ACGSL032
GSL020GSL020
VG52 VG52 VG52
ACSL013AACSL013AACSL013A
GSL10123838
H -
76H
5757
H -
190
1414
GSL021
GSL1012
GSL050
ACGSL032ACGSL042
VG52
VG52
GSL050
VG52
AC
SL01
3AA
CSL
013A
AC
SL01
3A
GSL021
GSL1012
GSL050
ACGSL032 ACGSL042
VG52
VG52
GSL050
VG52
AC
SL01
3AA
CSL
013A
AC
SL01
3A
GSL310
GSL310
GSL053GSL053
ACGSL032
ACGSL032
GSL310
GSL310
GSL053GSL053
ACGSL032
ACGSL032
PROFILESGSL1012 2 HGSL1012 2 WGSL020 6 W/3-52
GSL021 2 H-78
GLASS SIZE(1)
W/3-64H-190
3X
2 W-40.5
2 W-40.5
3 W-90
GSL050
GSL051
4 H-78
VG52
(2)
W/3-70H-190
GSL022 2 H-78(1)(2)
4 H-78GSL053
(1)(2) GSL020 6 W/3-58
ACCESSORIES
ACGSL03*(G) H-182.26ACGSL03*(G) W/3-566
ACSL013A 12
ACGSL084 24
ACGSL020 4ACGSL021 2ACGSL022 2(2)
ACGSL50* 6
(1) GSL021(2) GSL022
ACGSL045 2
4 H-40.5GSL050ACGSL042 W/3-5212(1)
(2) ACGSL042 W/3-5812ACGSL042 H-78.24
ACGSL1030 2
ACGSL03*(G) W/3-626(2)(1)
(1)
W
H
6 H-90VG523 W-90VG53
(1) W/3+28.5 (1) W/3-57 (1)W/3+28.5
39 2.544 (1) W/3-522.5 (1) W/3-52 2.5
3944(1) W/3-522.5
35
35
(2) W/3-58(2) W/3-58
(2) W/3-58
89 3.53.5
(1) W/3-643.5(1) W/3-64
893.5 (1) W/3-64(2) W/3-70
(2) W/3-70(2) W/3-70
(1) GSL021(2) GSL022
GSL050
NOTE: Locking is not included above. For GSL021, pleaseadd preferred lock type & handles from section B.
ACGSL1174 1 Multi-Point Lock
ACSL18* 1 Handle
ACGSL1170 12 Fixing Block
ACSG071 12 M4 x 40 Lock Screw
ACET060 10 Screw for Keep
Glazing Gasket
Screw For Rails
Interlock PlugsStile End Caps
Rollers
Drainage Cap
Woolpile
Interlock Plugs
Corner Cleat
End Cap For GSL1330/GSL1335
Stile End Caps
Glazing Gasket
Woolpile
Glazing Gasket
Woolpile
ACGSL1330/1335 1 pair
ACMX01615 (SL) 1 35/35 Cylinder
ACGSL1050 4 Corner Block To Join GSL050/051
Locking for GSL021
Locking for GSL022 per end sash
ACGSL304 4 Sash Locator
GSL310/1330/1335
(2) W/3+31.5 (2) W/3+31.5(2) W/3-63
-
ISSUED : JULY 2012
Do Not Scale From This Drawing
Slide 2000
Cutting Information
3838
H -
76H
5757
H -
190
1414
ACGSL042
GSL1010
ACGSL042
GSL051
ACGSL50*
ACSL013A ACSL013A
ACGSL042
GSL1010ACGSL042
GSL050ACSL013A ACSL013A
VG52 VG52
PROFILESGSL1010 2 HGSL1010 2 WGSL020 8 W/4-62.5
GSL021 4 H-78
GLASS SIZE(1)
W/4-74H-190
4X
1 W-40.5
1 W-40.5
2 W-90
GSL050
GSL051
4 H-78GSL310/1330/1335
VG52
(2)
W/4-83H-190
GSL022 4 H-78(1)(2)
4 H-78GSL053
(1)(2) GSL020 8 W/4-72.5
ACCESSORIES
ACGSL03*(G) H-1828ACGSL03*(G) W/4-668
ACSL013A 8
ACGSL084 32
ACGSL020 4ACGSL021 4ACGSL022 4(2)
ACGSL50* 8
ACGSL045 2
2 H-40.5GSL050ACGSL042 W/4-6216(1)
(2) ACGSL042 W/4-6716ACGSL042 H-786
ACGSL03*(G) W/4-718(2)(1)
(1)
GSL310
GSL310
GSL053GSL053
ACGSL032
ACGSL032
14
14
GSL021
GSL010
GSL050
ACGSL032 ACGSL042
ACGSL042
VG52
VG52
14
4 H-90VG522 W-90VG53
(1) GSL021(2) GSL022
W
H
GSL310
GSL053 GSL053
ACGSL032
14
14
GSL021
GSL010
GSL050
ACGSL042
ACGSL042
VG52
VG52
142.5
39 44 2.5
3.5
3.5
(1) GSL021(2) GSL022
GSL021GSL021 GSL040
(1) GSL021(2) GSL022
(1) GSL021(2) GSL022
WW/4+18 W/4-18 W/4-18 W/4+18
(1) W/4-62.5
(1) W/4-62.5 46.5 2.5
39442.5 (1) W/4-62.5
(1) W/4-62.546.5
(2) W/4-72.5
(2) W/4-72.5 (2) W/4-72.5
(2) W/4-72.5
89 (1) W/4-74
50(1) W/4-74(2) W/4-83
(2) W/4-833.5
89(1) W/4-7450 (1) W/4-74
(2) W/4-83
(2) W/4-83 3.55
GSL040 1 H-134 ACGSL040 2 GSL040 End Cap
ACGSL061 1 GSL040 GasketH-94
NOTE: Locking is not included above. For GSL021, pleaseadd preferred lock type & handles from section B.
Locking for GSL021
End Cap For GSL1330/GSL1335ACGSL1330/1335 4 pairs
Glazing Gasket
Screw For Rails
Interlock PlugsStile End Caps
Rollers
Drainage Cap
Woolpile
Corner Cleat
Stile End Caps
Glazing Gasket
Woolpile
Glazing Gasket
Woolpile
ACGSL1030 2 Interlock PlugsACGSL1050 4 Corner Block To Join GSL050/051
Locking for GSL022 per end sash
ACGSL304 4 Sash Locator
ACET190ACDV264 at 250mm centres
GSL040 Fixing Plateat 200mm centres
(2)(1)
ACDV265 at 250mm centres GSL040 ScrewGSL040 Screw
ACGSL1174 1 Multi-Point Lock
ACGSL1170 12 Lock Fixing Block
ACSG071 12 M4 x 40 Lock Screw
ACET122 10 Screw for KeepACMX01615 (SL) 1 35/35 Cylinder
Locking for GSL022 centre sashes
ACSL18* 1 Handle
ACGSL1171 10 Keep Fixing Block
ACSL18* 1 Dummy Handle
ACGSL1174 1 Multi-Point Lock
ACSL18* 1 Handle
ACGSL1170 12 Fixing Block
ACSG071 12 M4 x 40 Lock Screw
ACET060 10 Screw for KeepACMX01615 (SL) 1 35/35 Cylinder
AC
GSL
013A
AC
GSL
013A
AC
GSL
013A
AC
GSL
013A