Contents
2. Introduction – SlashPRO™ Arm Guards & Clothing
3. About Cut-TEX® PRO
PRODUCTS
UPPER BODY
4. SlashPRO™ Slash Resistant Polo T-Shirt
5. SlashPRO™ Slash Resistant Polo Sweatshirt
6. SlashPRO™ Slash Resistant V-Neck T-Shirt
7. SlashPRO™ Slash Resistant V-Neck Sweatshirt
8. SlashPRO™ Slash Resistant Turtleneck Jacket
9. SlashPRO™ Slash Resistant UBAC Shirt
10. SlashPRO™ Slash Resistant Hoodie with Kangaroo Front Pocket
11. SlashPRO™ Slash Resistant Turtleneck Sweatshirt with Thumbholes
12. SlashPRO™ Slash Resistant Neck Guard
13. SlashPRO™Slash Resistant Body Armour Base Layer
14. SlashPRO™ Slash Resistant Balaclava
LOWER BODY
15. SlashPRO™ Slash Resistant Boxer Shorts
16. SlashPRO™ Slash Resistant Long Johns
ARM GUARDS
17. SlashPRO™ Slash Resistant Arm Guards V1
18. SlashPRO™ Slash Resistant Arm Guards V1 with Added Protection
19. SlashPRO™ Slash Resistant Arm Guards V2
20. SlashPRO™ Slash Resistant Arm Guards V3
21. SlashPRO™ Slash Resistant Arm Guards V4
22. SlashPRO™ Slash Resistant Arm Guards V4 with Added Protection
23. SlashPRO™ Slash Resistant Arm Guards V5
GLOVES
24. SlashPRO™ Slash Resistant Gloves - Ares
25. SlashPRO™ Slash Resistant Gloves - Ares Long
26. SlashPRO™ Slash Resistant Gloves - Hera
27. SlashPRO™ Slash Resistant Gloves - Heracles
28. SlashPRO™ Slash Resistant Gloves - Titan
29. SlashPRO™ Slash Resistant Gloves - Classic
30. SlashPRO™ Slash Resistant Gloves - Nemesis
31. Contact
2
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
SlashPRO™ ClothingThe risk of being slashed with a weapon is very much a reality for professionals working within hostile environments namely, homeland security, prison and correctional facilities and in law enforcement.
SlashPRO™ Arm Guards & Clothing can effectively help reduce the risk of such injuries, offering BS EN 388:2003 blade cut resistance level 5.
Slash related injuries can of course become infected and, even worse, lead to potentially life threatening injuries through blood loss. Equally, life changing physical injuries could occur which could ultimately be prevented.
This is not to mention the psychological trauma this could cause long term to the individual staff member who sustains such injuries.
SlashPRO™ is the ultimate protection in the fight against this ever increasing problem. Staff assaults are on the increase within such environments, so it pays to protect staff against the very worse case scenarios.
Whilst the focus is very much on potential attacks against staff, it may be that, indirectly, staff are required to attend an incident of self-harm, where they are then potentially exposed to risk of attack and a slashing of some description occurring.
• Attacks in prisons are on the increase. There were 5,423 assaults on prison staff in the 12 months to the end of March 2016 - a rise of 40% on the previous year. This is only likely to increase further over the coming years.
• Attacks on police officers, who sustained injury, topped 7,903 in 2015. This was from a total of 23,000 reported to Health and Safety departments within police forces in the UK.
• In the USA, the FBI conducted a survey in 2013 on the number of officers assaulted with knives/blades. These were higher than the amount of attacks using firearms. This number has increased year on year up to the present day.
• According to the 2013 Correctional Officer Wellness and Safety Literature Review, correctional officers are involved in the highest amount of non-fatal violent encounters than any other occupation.
• A study by the National Institute of Justice in 2007, discovered there are approximately 2,000 correctional staff member injuries annually due to violence against officers by inmates.
• The BBC in the UK reported on 16th April 2014 that the number of serious attacks on prison officers by inmates increased by 45% in two years, figures released by Labour have revealed. In 2012, a total of 543 assaults on prison officers were referred to the police – up from 374 in 2010.
• A 2015 study in the U.S. concluded that for every 10,000 full-time Corrections Officers, there were 254 workplace assaults and violent injuries reported in 2011 that’s 36 times the rate for all American workers. In 2013, 15 workplace fatalities of correctional workers were reported nationwide, in a workforce of nearly 470,000 people.
• On 27th February 2016 the UK based Mirror Newspaper claimed that prisoners have assaulted more than 1,000 prison officers in just two months. These include 95 of the highest category ‘serious’ assaults on staff, such as being slashed with homemade weapons. The two monthly totals is equivalent to more than 16 prison officers being attacked each day. The figures show that 905 officers were victims of the lesser ‘assault’ during this period. This represented a surge of 15 per cent.
I performed multiple tests on the durability of the SlashPRO™ shirt. I utilized straight and serrated blades while testing the shirt. I did not have any success
piercing through the arms or shoulder area of the shirt. I believe the shirt works very well for its intended purpose.”- Deputy Henry Schneider - Santa Rosa County Sheriff’s Office - Team Leader / Emergency Response Team - Tactical Corrections Operator
SlashPRO™ Slash Resistant Polo Sweatshirt
Why is SlashPRO™ Clothing So Important?
2
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
About Cut-Tex® PRO
Cut-Tex® PRO is an ultra-high performance cut, bite and slash resistant fabric, comfortable to wear, fully machine washable and of truly exceptional strength and durability - making it the ideal material for SlashPRO™ Clothing.
As you can see below, Cut-Tex® PRO performs very highly in all cut, tear and abrasion tests:
Cut Resistance (Test 1) - ISO 13997:1999 Blade Cut Resistance Levels 1-5:
Cut Resistance (Test 2) - ASTM F-1790 Blade Cut Resistance Levels 1-5:
Tear Resistance - EN 388:2003 Tear Resistance Levels 1-4:
Abrasion Resistance - EN 388:2003 Abrasion Resistance Levels1-4:
Fabric Weight - GSM (Grams per square metre)
0
2 310 4
41 2 3
Newtons
0Grams Force
Newtons
Cycles
GSM
0
2 3 4 51
2 310 54
2 310 4
1 2 3 4
+31.5
2580
518.22
+8000
447
Cut-Tex® PRO Performance Charts:
Cut-Tex PRO®
The Ultimate Cut Protection™
3
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
SlashPRO™Clothing
SlashPRO™Clothing
Product: SlashPRO™ Slash Resistant Polo T Shirt
Model #: 100104
SlashPRO™ Slash Resistant Polo T-Shirts are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used on the entire garment providing excellent cut and slash resistance
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only. *Length from neck point to hem. **Fully open.
Description S M L XL 2XLA Neck Width 16.5 17 17.5 18 19B Chest 46 50 54 58 62C Hem 47 51 55 59 63D Front Body* 70 72 74 75 76E Shoulder Width 44 46 48 50 52F Sleeve Overarm 21 22 23 24 25G Arm Opening/Hole 25 26 27 28 29H Sleeve Cuff Opening 15.5 16 17 18 19J Back Collar height** 7.5 7.5 7.5 7.5 8K Front collar edge 6 6 6 6 6.5L Placket Length 15.5 15.5 15.5 16 16M Placket Width 3 3 3 3 3
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
D
G
F
B
E
J
KL
C
A
H
T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
4
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Polo Sweatshirt
Model #: 100105
SlashPRO™ Slash Resistant Polo Sweatshirts are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used on the entire garment providing excellent cut and slash resistance
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only. *Length from neck point to hem. **Fully open.
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
Description S M L XL 2XL
A Neck width 16.5 17 17.5 18 19
B Chest 46 50 54 58 62
C Hem 47 51 55 59 63
D Front body* 70 72 74 75 76
E Shoulder width 44 46 48 50 52
F Sleeve overarm 60 61 62 63 64
G Arm opening/hole 25 26 27 28 29
H Sleeve cuff opening 11 11 12 12 12.5
J Back collar height** 7.5 7.5 7.5 7.5 8
K Front collar edge 6 6 6 6 6.5
L Placket length 15.5 15.5 15.5 16 16
M Placket width 3 3 3 3 3C
E
J
KL
F
B
H
G
A
D
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
5
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant T Shirt
Model #: 100108
SlashPRO™ Slash Resistant T-Shirts are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used on the entire garment providing excellent cut and slash resistance
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.
Description S M L XL 2XL 3XL
A Collar 15 16 17 18 19 20
B Chest 50 52 54 56 60 64
C Hem 51 53 55 57 61 65
D Front body 64 66.5 69 71.5 74 76.5
E Shoulder width 43 46 49 52 55 58
F Sleeve overarm 21 22 23 24 25 26
G Arm opening/hole 20 21 23 24 26 27
H Sleeve cuff opening 16 18 20 22 23 24C
D
A
G
F
E
B
H
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 4XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
6
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Sweatshirt (Long Sleeve)
Model #: 100109
SlashPRO™ Slash Resistant Sweatshirts are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used on the entire garment providing excellent cut and slash resistance
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.
Description S M L XL 2XL 3XL
A Collar 15 16 17 18 19 20
B Chest 50 52 54 56 60 64
C Hem 50 52 54 56 60 64
D Front body 64 66.5 69 71.5 74 76.5
E Shoulder width 43 46 49 52 55 58
F Sleeve overarm 56 57 58 59 61 62
G Arm opening/hole 20 21 23 24 26 27
H Sleeve cuff opening 10 11 12 13 14 15C
D
A
G
H
E
B
F
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 4XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
7
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Turtleneck Jacket
Model #: 100117
SlashPRO™ Slash Resistant Jackets are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used on the entire garment providing excellent cut and slash resistance
• High neck prevents neck and vertebral arteries from being exposed
• Zipped front makes this garment more user friendly
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
All measurements are taken fl at in centimetres, unless indicated with C. All measurements are approximate and offered as a guideline only. C = Circumference measurement.
Description S M L XL 2XL 3XL 4XL
A Collar C 45.5 46.5 47.5 48.5 49.5 50.5 51.5
B Chest 53 56 59 62 65 68 71
C Hem 53 56 59 62 65 68 71
D Front body length 69 72 75 78 81 84 87
E Shoulder width 43 46 49 52 55 58 61
F Sleeve overarm 60 62 64 66 67 68 68
G Arm opening/hole 24 25 26 27 28 29 30
H Sleeve cuff opening 10 10 11 11 12 13 14
E
F
D
G
H C
A
B
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 4XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
8
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant UBAC Shirt
Model #: 100115
SlashPRO™ Slash Resistant UBAC Shirts are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance - providing an effective shield and protects areas often unguarded by common body armour e.g. key arteries from laceration and subsequent rapid blood loss.
Features & Benefi ts
• Offering comfortable yet effective cut protection to the radial artery, brachial artery, carotid artery and axillary artery whilst wearing body armour. Laceration of either of these arteries can lead to rapid blood loss and potential death.
• Two upper arm pockets (for small notepad and pens) with Velcro for rank patches, blood patches or other attachments
• Machine washable• Thumb loops to keep sleeves in place• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:• Law Enforcement• Military• Corrections / Prison Service• Immigration• Customs• Border Control• Private Security & Military Contractors• Civil Enforcement
All measurments are taken fl at in centimetres, unless indicated with C. All measurements are approximate and offered as a guideline only. C = Circumference measurement. † = Length from neck point to hem.
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 4XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Description S M L XL 2XL 3XL 4XL
A Collar C 44.5 45 45.5 46 46.5 47 48
B Chest 51 54 57 60 63 66 69
C Hem 51 54 57 60 63 66 69
D Front Body † 69 72 75 78 81 84 87
E Shoulder Width 43 46 49 52 55 58 61
F Sleeve Overarm 61 62 63 64 65 66 67
G Arm Opening/Hole 20 21 22 23 24 25 26
H Under Arm Length 46.5 48 49.5 51 52.5 54 55.5
I Sleeve Cuff Opening 11 12 13 14 15 16 16
I
A
B
EF
H
C
D
G
9
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Hoodie with Kangaroo Front Pocket
Model #: 100102
SlashPRO™ Slash Resistant Hoodies are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used on the entire garment providing excellent cut and slash resistance
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:• Law Enforcement• Military• Corrections / Prison Service• Immigration• Customs• Border Control• Private Security & Military Contractors• Civil Enforcement
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 3XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.
Description S M L XL 2XL 3XL
A Collar 15 16 17 18 19 20
B Chest 50 52 54 56 60 64
C Hem 51 53 55 57 61 65
D Front body 64 66.5 69 71.5 74 76.5
E Shoulder width 43 46 49 52 55 58
F Sleeve overarm 61 62 63 64 65 66
G Arm opening/hole 20 21 23 24 26 27
H Sleeve cuff opening 8.5 9 9.5 10 10.5 11C
D
A
G
H
E
B
F
10
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Turtleneck Sweatshirtwith Thumbholes
Model #: 100107
SlashPRO™ Slash Resistant Sweatshirts are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used on the entire garment providing excellent cut and slash resistance
• High neck prevents neck and vertebral arteries from being exposed
• Thumbhole sleeves prevent the wrist and radial artery from being exposed
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.
E
F
D
G
H
I C
A
B
Description S M L XL 2XL
A Collar 18 19 20 21 22
B Chest 50 52 54 56 60
C Hem 50 52 54 56 60
D Front body length 64 66.5 69 71.5 74
E Shoulder width 43 46 49 52 55
F Sleeve overarm 62 62 64 64 66
G Arm opening/hole 20 21 23 24 26
H Sleeve cuff opening 10 11 12 13 14
I Thumbhole 5 5 5 5 5.5
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
11
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Neck Guard
Model #: 100110
SlashPRO™ Slash Resistant Neck Guards are manufactured using Cut-Tex® PRO which acts as an effective shield and protects areas often unguarded by common body armour.
Features & Benefi ts• Offering comfortable yet effective cut
protection to the carotid artery, an area even exposed whilst wearing any type of body armour. Laceration of this artery can lead to rapid blood loss and potential death.
• Folding down collar
• Machine washable
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Black
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
All measurments are taken fl at in centimetres. All measurements are approximate and offered as a guideline only. *Length from neck point to hem. **Fully open.
Find Your SizePlease use this chart as a guide. Measure the circumference of your head just above the brow line.
Size Head circumference
S 50-52cm
M 53-55cm
L 56-58cm
XL 59-61cm
XXL 62-64cm
Size A: Neck side point to point
B: Centre front length
C: Shoulder width
S 23cm 18cm 38cm
M 24cm 19cm 39cm
L 25cm 20cm 40cm
XL 26cm 21cm 41cm
XXL 27cm 22cm 42cm
A
B
C
12
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Body Armour Base Layer
Model #: 100112
SlashPRO™ Slash Resistant Body Armour Base Layers are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used under the arm and the unprotected sides of the upper body - providing excellent cut and slash resistance
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 3XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
All measurments are taken fl at in centimetres, unless indicated with C. All measurements are approximate and offeredas a guideline only. C = Circumference measurement.
Description S M L XL 2XL 3XL
A Collar C 42.5 43 43.5 44 44.5 45
B Chest 51 54 57 60 63 66
C Hem 51 54 57 60 63 66
D Front body length 69 72 75 78 81 84
E Shoulder width 43 46 49 52 55 58
F Sleeve overarm 57 58 59 60 61 62
G Arm opening/hole 20 21 22 23 24 25
H Sleeve cuff opening 11 12 13 14 15 16C
D
A
G
H
E
B
F
13
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Balaclava
Model #: 100121
SlashPRO™ Slash Resistant Balaclavas are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Cut-Tex® PRO used on the entire garment providing excellent cut and slash resistance
• Ideal for forced entry operations and riot teams
• Effectively protecting Carotid Artery
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Description S/M L/XL 2XL/3XL
A Height 43 45 47
B Width 24 26 28
BA
14
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Boxer Shorts
Model #: 200150
SlashPRO™ Slash Resistant Boxer Shorts are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Excellent cut and slash protection
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only. †Including waistband.
Description S M L XL 2XL 3XL
A Waist (relaxed) 30 34 38 42 46 50
B Waist (stretched) 45 49 53 57 61 65
C Hip - 17cm below waist 46 49 52 55 58 61
D Side leg length† 42 43 44 45 46 47
E Inside leg 20 20 20 20 20 20
F Leg opening 29 30 31 32 33 34
G Front rise† 28 29 30 31 32 33
H Back rise† 30 31 32 33 34 35
I Waist band depth 4 4 4 4 4 4
17cm
B
G
E
F
C
I
A
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 3XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
15
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Long Johns
Model #: 200102
SlashPRO™ Slash Resistant Long Johns are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
Features & Benefi ts
• Excellent cut and slash protection for the lower part of the body
• Slim fi t
• Adjustable cord
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.†Including waistband.
Description S M L XL 2XL 3XL
A Waist (relaxed) 30 34 38 42 46 50
B Waist (stretched) 45 49 53 57 61 65
C Hip - 17cm below waist 46 49 52 55 58 61
D Outside leg length† 100.5 101 101.5 102 102.5 103
E Inside leg 76.5 77 77.5 78 78.5 79
F Calf width 22 22.5 23 23.5 24 24.5
G Ankle width 14 14 16 16 18 18
H Front rise† 28 29 30 31 32 33
I Back rise† 30 31 32 33 34 35
J Waist band depth 4 4 4 4 4 4
C
17cm
24cm
H
AB
J
D
EF
G
Material Content 100% Cut-Tex® PRO
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 3XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
16
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Arm Guards V1
Model #: 100500
SlashPRO™ Arm Guards (Version 1) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.*Measured 14cm down from the elasticated cuff.
Description S M L XL
A Cuff width 10 11 12 13
B Sleeve length 23 26 29 29
C Elasticated arm cuff (relaxed) 11 13 15 17
D Arm width* 13 15 17 19
Features & Benefi ts
• Sold in pairs
• Overtly worn
• Excellent cut and slash resistance
• Thumbhole for improved fi t
• Quick and easy to put on
• Highly breathable inner lining
• Durable and water repellent outer material
• 100% Latex free
• Also available as model with additional outstanding protection from severe bruising and blunt forced trauma - Model 100503
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & MilitaryContractors
• Civil EnforcementA
D
C
B
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - XL
Clothing Care Machine washable up to 40° Celsius
Colour Black
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
17
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Arm Guards V1 with Added Protection
Model #: 100503
SlashPRO™ Arm Guards are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
This particular model provides additional protection to prevent severe bruising and blunt forced trauma - using specially engineered impact absorbing foam.
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.*Measured 14cm down from the elasticated cuff.
Description S M L XL
A Cuff width 10 11.5 13 14.5
B Sleeve length 23 26 29 29
C Elasticated arm cuff (relaxed) 14 15 16 17
D Arm width* 14 16 18 20
Features & Benefi ts
• Sold in pairs
• Overtly worn
• Excellent cut and slash resistance
• Worn tight around the forearm
• Thumbhole for improved fi t
• Quick and easy to put on
• Highly breathable inner lining
• Durable and water repellent outer material
• 100% Latex free
• Additional protection to prevent severe bruising and blunt forced trauma
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
A
D
C
B
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - XL
Clothing Care Machine washable up to 40° Celsius
Colour Black
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
18
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Arm Guards V2
Model #: 100501
SlashPRO™ Arm Guards (Version 2) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.
Description S M L XL
A Cuff width 9 10 11 12
B Sleeve length 22 24 25 26
C Arm width 11 12 13 14
Features & Benefi ts
• Sold in pairs
• Excellent cut and slash resistance
• Worn tight around the forearm
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
A
C
B
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
19
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Arm Guards V3
Model #: 100504
SlashPRO™ Arm Guards (Version 3) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.
Description S M L XL
A Cuff width 9 10 11 12
B Sleeve length 30 32 33 34
C Arm width 11 12 13 14
D Thumbhole opening 6 6 6 6
Features & Benefi ts
• Sold in pairs
• Excellent cut and slash resistance
• Worn tight around the forearm
• Also offering bite protection on inside and back of hand
• Thumbhole for improved fi t
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
AD
C
B
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
20
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Full Arm Guards V4
Model #: 100502
SlashPRO™ Arm Guards (Version 4) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.
Description S M L XL
A Sleeve length 144 156 168 178
B Sleeve under arm seam 48 50 55 60
C Cuff opening 10 12 14 14
D Arm hole opening 20 22 24 26
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - XL
Clothing Care Machine washable up to 40° Celsius
Colour Black
Place of Manufacture EU
Features & Benefi ts
• Sold as one unit
• Overtly worn
• Excellent cut and slash resistance
• Worn tight around the forearm
• Thumbhole for improved fi t
• Quick and easy to put on
• Highly breathable inner lining
• Durable and water repellent outer material
• Thumb-loops to keep sleeves in perfect position even when arms are fully stretched or during high level of activity
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
A
C
D
B
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
21
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Full Arm Guards V4 with Added Protection
Model #: 100506
SlashPRO™ Arm Guards (Version 4) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
This particular model provides additional protection to prevent severe bruising and blunt forced trauma - using specially engineered impact absorbing foam.
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
CE Marking Cat II PPE Directive
Sizes S - XL
Clothing Care Machine washable up to 40° Celsius
Colour Black
Place of Manufacture EU
Features & Benefi ts
• Sold as one unit
• Overtly worn
• Excellent cut and slash resistance
• Worn tight around the forearm
• Thumbhole for improved fi t
• Quick and easy to put on
• Highly breathable inner lining
• Durable and water repellent outer material
• Thumb-loops to keep sleeves in perfect position even when arms are fully stretched or during high level of activity
• 100% Latex free
• Additional protection to prevent severe bruising and blunt forced trauma
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement Description S M L XL
A Sleeve length 144 156 168 178
B Sleeve under arm seam 48 50 55 60
C Cuff opening 10 12 14 14
D Arm hole opening 20 22 24 26
A
C
D
B
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
22
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Arm Guards V5
Model #: 100505
SlashPRO™ Arm Guards (Version 5) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
All measurements are taken fl at in centimetres. All measurements are approximate and offered as a guideline only.
Features & Benefi ts
• Sold as one unit
• Can be worn both overtly or covertly
• Excellent cut and slash resistance
• Worn tight around the forearm
• Also offering bite protection on inside and back of hand
• Thumbhole for improved fi t
• 100% Latex free
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
Place of Manufacture EU
Description S M L XL
A Sleeve length 150 163 175 185
B Sleeve under arm seam 50 53 58 63
C Cuff opening 9 10 11 12
D Arm hole opening 20 22 24 26
A
C
D
B
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
23
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Gloves - Ares
Model #: 300102
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Features & Benefi ts• Cut-Tex® PRO provides excellent cut
resistance to BS EN 388:2003 Level 5 (highest level possible)
• Lightweight nylon and elastane blend on the back of the hand
• Velcro strap keeps the gloves secure around the wrist
• Synthetic non-slip palm grip with reinforced palms and fi ngertips
Who Is This Product Suitable For?Professionals working within these sectors:• Law Enforcement• Military• Corrections / Prison Service• Immigration• Customs• Border Control• Private Security & Military Contractors• Civil Enforcement
2. Find Your Hand LengthMeasure from the bottom edge of your palm to the tip of your middle fi nger to fi nd your ‘fi nger length’.
1. Find Your Hand WidthWrap a tailor’s measuring tape around your dominant hand just below the knuckles, excluding your thumb, and make a fi st. This is your ‘hand width’.
EU Glove size
US Glove size
Inches CMs
6 XS 6-7 15-17
7 S 7-8 17-20
8 M 8-9 20-22
9 L 9-10 22-25
10 XL 10-11 25-27
11 2XL 11+ 28+
EU Glove size
US Glove size
Inches CMs
6 XS 6.5 16.5
7 S 7 18
8 M 7.5 19
9 L 8 20
10 XL 8.5 21.5
11 2XL 9 23
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
SlashPRO™ Gloves (Ares) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
For additional needle protection please contact us
24
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Gloves - Ares Long
Model #: 300109
SlashPRO™ Gloves (Ares Long) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Features & Benefi ts• Cut-Tex® PRO provides excellent cut
resistance to BS EN 388:2003 Level 5 (highest level possible)
• Lightweight nylon and elastane blend on the back of the hand
• Velcro strap keeps the gloves secure around the wrist
• Synthetic non-slip palm grip with reinforced palms and fi ngertips
Who Is This Product Suitable For?Professionals working within these sectors:• Law Enforcement• Military• Corrections / Prison Service• Immigration• Customs• Border Control• Private Security & Military Contractors• Civil Enforcement
2. Find Your Hand LengthMeasure from the bottom edge of your palm to the tip of your middle fi nger to fi nd your ‘fi nger length’.
1. Find Your Hand WidthWrap a tailor’s measuring tape around your dominant hand just below the knuckles, excluding your thumb, and make a fi st. This is your ‘hand width’.
EU Glove size
US Glove size
Inches CMs
6 XS 6-7 15-17
7 S 7-8 17-20
8 M 8-9 20-22
9 L 9-10 22-25
10 XL 10-11 25-27
11 2XL 11+ 28+
EU Glove size
US Glove size
Inches CMs
6 XS 6.5 16.5
7 S 7 18
8 M 7.5 19
9 L 8 20
10 XL 8.5 21.5
11 2XL 9 23
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
For additional needle protection please contact us
25
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Gloves - Hera
Model #: 300110
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Features & Benefi ts• Cut-Tex® PRO provides excellent cut
resistance to BS EN 388:2003 Level 5 (highest level possible)
• Lightweight nylon and elastane blend on the back of the hand
• Elasticised wrist keeps the gloves secure around the wrist
Who Is This Product Suitable For?Professionals working within these sectors:• Law Enforcement• Military• Corrections / Prison Service• Immigration• Customs• Border Control• Private Security & Military Contractors• Civil Enforcement
2. Find Your Hand LengthMeasure from the bottom edge of your palm to the tip of your middle fi nger to fi nd your ‘fi nger length’.
1. Find Your Hand WidthWrap a tailor’s measuring tape around your dominant hand just below the knuckles, excluding your thumb, and make a fi st. This is your ‘hand width’.
EU Glove size
US Glove size
Inches CMs
6 XS 6-7 15-17
7 S 7-8 17-20
8 M 8-9 20-22
9 L 9-10 22-25
10 XL 10-11 25-27
11 2XL 11+ 28+
EU Glove size
US Glove size
Inches CMs
6 XS 6.5 16.5
7 S 7 18
8 M 7.5 19
9 L 8 20
10 XL 8.5 21.5
11 2XL 9 23
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
SlashPRO™ Gloves (Hera) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
For additional needle protection please contact us
26
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Gloves - Heracles
Model #: 300106
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Features & Benefi ts• Cut-Tex® PRO provides excellent cut resistance to
BS EN 388:2003 Level 5 (highest level possible)• Kevlar® outer with leather palms - sewn with
abrasion, cut and heat resistant Kevlar® thread• Velcro strap keeps the gloves secure around
the wrist• Soft padded knuckle protection• Synthetic non-slip palm grip with reinforced
palms and fi ngertips
Who Is This Product Suitable For?Professionals working within these sectors:• Law Enforcement• Military• Corrections / Prison Service• Immigration• Customs• Border Control• Private Security & Military Contractors• Civil Enforcement
2. Find Your Hand LengthMeasure from the bottom edge of your palm to the tip of your middle fi nger to fi nd your ‘fi nger length’.
1. Find Your Hand WidthWrap a tailor’s measuring tape around your dominant hand just below the knuckles, excluding your thumb, and make a fi st. This is your ‘hand width’.
EU Glove size
US Glove size
Inches CMs
6 XS 6-7 15-17
7 S 7-8 17-20
8 M 8-9 20-22
9 L 9-10 22-25
10 XL 10-11 25-27
11 2XL 11+ 28+
EU Glove size
US Glove size
Inches CMs
6 XS 6.5 16.5
7 S 7 18
8 M 7.5 19
9 L 8 20
10 XL 8.5 21.5
11 2XL 9 23
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
SlashPRO™ Gloves (Heracles) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
For additional needle protection please contact us
27
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Gloves - Titan
Model #: 300116
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Features & Benefi ts• Cut-Tex® PRO provides excellent cut
resistance to BS EN 388:2003 Level 5 (highest level possible)
• 100% Cow hide leather palm• Carbon knuckle protection with ventilation on
the fi ngers• Synthetic non-slip back and palm grip• Soft padded cuff with Velcro strap to secure
around wrist
Who Is This Product Suitable For?Professionals working within these sectors:• Law Enforcement• Military• Corrections / Prison Service• Immigration• Customs• Border Control• Private Security & Military Contractors• Civil Enforcement
2. Find Your Hand LengthMeasure from the bottom edge of your palm to the tip of your middle fi nger to fi nd your ‘fi nger length’.
1. Find Your Hand WidthWrap a tailor’s measuring tape around your dominant hand just below the knuckles, excluding your thumb, and make a fi st. This is your ‘hand width’.
EU Glove size
US Glove size
Inches CMs
6 XS 6-7 15-17
7 S 7-8 17-20
8 M 8-9 20-22
9 L 9-10 22-25
10 XL 10-11 25-27
11 2XL 11+ 28+
EU Glove size
US Glove size
Inches CMs
6 XS 6.5 16.5
7 S 7 18
8 M 7.5 19
9 L 8 20
10 XL 8.5 21.5
11 2XL 9 23
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
SlashPRO™ Gloves (Titan) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
For additional needle protection please contact us
28
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Gloves - Classic
Model #: 300104
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Features & Benefi ts• Cut-Tex® PRO provides excellent cut
resistance to BS EN 388:2003 Level 5 (highest level possible)
• 100% Cow hide leather outer shell
• Elasticised wrist keeps the gloves secure around the wrist
Who Is This Product Suitable For?
Professionals working within these sectors:
• Law Enforcement
• Military
• Corrections / Prison Service
• Immigration
• Customs
• Border Control
• Private Security & Military Contractors
• Civil Enforcement
2. Find Your Hand LengthMeasure from the bottom edge of your palm to the tip of your middle fi nger to fi nd your ‘fi nger length’.
1. Find Your Hand WidthWrap a tailor’s measuring tape around your dominant hand just below the knuckles, excluding your thumb, and make a fi st. This is your ‘hand width’.
EU Glove size
US Glove size
Inches CMs
6 XS 6-7 15-17
7 S 7-8 17-20
8 M 8-9 20-22
9 L 9-10 22-25
10 XL 10-11 25-27
11 2XL 11+ 28+
EU Glove size
US Glove size
Inches CMs
6 XS 6.5 16.5
7 S 7 18
8 M 7.5 19
9 L 8 20
10 XL 8.5 21.5
11 2XL 9 23
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
SlashPRO™ Gloves (Classic) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
For additional needle protection please contact us
29
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Product: SlashPRO™ Slash Resistant Gloves - Nemesis
Model #: 300111
SlashPRO™Clothing
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Features & Benefi ts• Cut-Tex® PRO provides excellent cut
resistance to BS EN 388:2003 Level 5 (highest level possible)
• Nomex® Fire Resistant Outer• Elasticised wrist with extended arm for
protection of the Radial artery• Silicone dotted palm and fi ngers• Leather padded knuckle protection
Who Is This Product Suitable For?Professionals working within these sectors:• Law Enforcement• Military• Corrections / Prison Service• Immigration• Customs• Border Control• Private Security & Military Contractors• Civil Enforcement
2. Find Your Hand LengthMeasure from the bottom edge of your palm to the tip of your middle fi nger to fi nd your ‘fi nger length’.
1. Find Your Hand WidthWrap a tailor’s measuring tape around your dominant hand just below the knuckles, excluding your thumb, and make a fi st. This is your ‘hand width’.
EU Glove size
US Glove size
Inches CMs
6 XS 6-7 15-17
7 S 7-8 17-20
8 M 8-9 20-22
9 L 9-10 22-25
10 XL 10-11 25-27
11 2XL 11+ 28+
EU Glove size
US Glove size
Inches CMs
6 XS 6.5 16.5
7 S 7 18
8 M 7.5 19
9 L 8 20
10 XL 8.5 21.5
11 2XL 9 23
Blade Cut Resistance
EN 388:2003 Level 5 (the highest possible)
ISO 13997:1999 Level 5 (the highest possible)
ASTM F 1790-05 Level 4
Abrasion Resistance
EN 388:2003 Level 4 (the highest possible)
Tear Resistance
EN 388:2003 Level 4 (the highest possible)
Dimensional Stability Test Achieved excellent results
CE Marking Cat II PPE Directive
Sizes S - 2XL
Clothing Care Machine washable up to 40° Celsius
Colour Grey
SlashPRO™ Gloves (Nemesis) are manufactured using Cut-Tex® PRO - offering absolutely outstanding, tested and certifi ed levels of cut, abrasion and tear resistance.
For additional needle protection please contact us
30
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com
Contact
PPSS GroupWhitfield Business Park Unit 1-2, Manse Lane Knaresborough HG5 8BS United Kingdom
T: +44 (0) 845 5193 953
W: www.ppss-group.com
31
SlashPRO™Clothing T: +44 (0) 845 5193 953 | E: [email protected]
Visit our website: www.slash-pro.com