2016-04-01 1
2016-04-01
Silicon PIN Photodiode
Version 1.8
SFH 2400
Ordering Information
Features:
• Especially suitable for applications from 380 nm to 1100 nm
• Short switching time (typ. 5 ns)
• The product qualification test plan is based on the guidelines of AEC-Q101-REV-C, Stress Test Qualification
for Automotive Grade Discrete Semiconductors.
Applications
• Photointerrupters
• Industrial electronics
• For control and drive circuits
Type: Photocurrent Ordering Code
IP [µA]
VR = 5 V, standard light A, Ev =
1000lx
SFH 2400 10 (≥ 6) Q65110A2628
2016-04-01 2
Version 1.8 SFH 2400
Maximum Ratings (TA = 25 °C)
Characteristics (TA = 25 °C, Standard Light A, T = 2856 K)
Parameter Symbol Values Unit
Operating and storage temperature range Top; Tstg -40 ... 100 °C
Reverse voltage VR 20 V
Reverse voltage
(t < 2 min)
VR 50 V
Total Power dissipation Ptot 120 mW
ESD withstand voltage
(acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM)
VESD 2000 V
Thermal resistance for mounting on pcb RthJA 450 K/W
Parameter Symbol Values Unit
Photocurrent
(Ev = 1000 lx, Std. Light A, VR = 5 V, T = 2856 K)
(typ (min)) IP 10 (≥ 6) µA
Photocurrent
(VR = 5 V, λ = 870 nm, Ee = 1 mW/cm2)
(typ (min)) IP 6.5 μA
Wavelength of max. sensitivity (typ) λS max 850 nm
Spectral range of sensitivity (typ) λ10% (typ) 380
... 1100
nm
Radiant sensitive area (typ) A 1.00 mm2
Dimensions of radiant sensitive area (typ) L x W 1 x 1 mm x
mm
Half angle (typ) ϕ ± 60 °
Dark current
(VR = 20 V)
(typ (max)) IR 1 (≤ 5) nA
Spectral sensitivity of the chip
(λ = 870 nm)
(typ) Sλ typ 0.65 A / W
Quantum yield of the chip (typ) η 0.93 Electro
ns
/Photon
Open-circuit voltage
(Ev = 1000 lx, Std. Light A)
(typ (min)) VO 320 mV
Short-circuit current
(Ev = 1000 lx, Std. Light A)
(typ) ISC 10 µA
Rise and fall time
(VR = 20 V, RL = 50 Ω, λ = 850 nm)
(typ) tr, tf 0.005 µs
Forward voltage
(IF = 80 mA, E = 0)
(typ) VF 1.3 V
Version 1.8 SFH 2400
2016-04-01 3
Capacitance
(VR = 0 V, f = 1 MHz, E = 0)
(typ) C0 11 pF
Temperature coefficient of VO (typ) TCV -2.6 mV / K
Temperature coefficient of ISC
(Std. Light A)
(typ) TCI 0.18 % / K
Noise equivalent power
(VR = 20 V, λ = 870 nm)
(typ) NEP 0.028 pW /
Hz½
Detection limit (typ) D* 3.6e12 cm x
Hz½ / W
Relative Spectral Sensitivity 1) page 12
Srel = f(λ)Photocurrent / Open-Circuit Voltage 1) page 12
IP (VR = 5 V) / VO = f(EV)
Parameter Symbol Values Unit
λ
OHF01129
0
relS
400 600 800 1000 1200
20
40
60
80
%
100
nmE
OHF01025
V
010
PΙ
-11010 1 10 2 10 4
10 0
10 0
VO
µA mV
Ι P
VO
10 3 lx
110
210 10 3
10 2
110
2016-04-01 4
Version 1.8 SFH 2400
Dark Current 1) page 12
IR = f(VR), E = 0Capacitance 1) page 12
C = f(VR), f = 1 MHz, E = 0
Dark Current 1) page 12
IR = f(TA), VR = 10 V, E = 0
V
OHF01026
R
RΙ
0
410
310
210
10 1
pA
20 V 3010
OHF05718
AT
10-6
˚C-50
RI
µA
0 50 100
-510
10-4
-310
10-2
-110
010
Version 1.8 SFH 2400
2016-04-01 5
Directional Characteristics 1) page 12
Srel = f(ϕ)
Package Outline
Dimensions in mm (inch).
OHF01402
90
80
70
60
50
40 30 20 10
20 40 60 80 100 1200.40.60.81.0
ϕ
0.2
0.4
0.6
0.8
1.0
1000
0
0
2016-04-01 6
Version 1.8 SFH 2400
Pinning
Pin Description
1 cathode
2 n.c.
3 anode
Package
Smart DIL
Approximate Weight:
12 mg
Recommended Solder Pad
Version 1.8 SFH 2400
2016-04-01 7
Reflow Soldering Profile
Product complies to MSL Level 4 acc. to JEDEC J-STD-020D.01
00
s
OHA04525
50
100
150
200
250
300
50 100 150 200 250 300
t
T
˚C
St
t
Pt
Tp240 ˚C
217 ˚C
245 ˚C
25 ˚C
L
OHA04612
Profile Feature
Profil-Charakteristik
Ramp-up rate to preheat*)
25 °C to 150 °C2 3 K/s
Time tS TSmin to TSmax
tS
tL
tP
TL
TP
100 12060
10 20 30
80 100
217
2 3
245 260
3 6
Time25 °C to TP
Time within 5 °C of the specified peaktemperature TP - 5 K
Ramp-down rate*TP to 100 °C
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
Ramp-up rate to peak*)
TSmax to TP
Liquidus temperature
Peak temperature
Time above liquidus temperature
Symbol
Symbol
Unit
Einheit
Pb-Free (SnAgCu) Assembly
Minimum MaximumRecommendation
K/s
K/s
s
s
s
s
°C
°C
480
2016-04-01 8
Version 1.8 SFH 2400
Taping
Dimensions in mm (inch).
Tape and Reel
12 mm tape with 2000 pcs. on ∅ 180 mm reel
D0
2P
P0
1P
WFE
Direction of unreeling
N
W1
2W
A
OHAY0324
Label
Leader:Trailer:
13.0
Direction of unreeling
±0.2
5
min. 160 mm *
min. 400 mm *
*) Dimensions acc. to IEC 60286-3; EIA 481-D
Version 1.8 SFH 2400
2016-04-01 9
Tape dimensions [mm]Tape dimensions in mm
Reel dimensions [mm]Reel dimensions in mm
Barcode-Product-Label (BPL)
Dry Packing Process and Materials
Note:
Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet. Here you will also find the normative
references like JEDEC.
W P0 P1 P2 D0 E F
12 + 0.3 / - 0.1 4 ± 0.1 4 ± 0.1
or
8 ± 0.1
2 ± 0.05 1.5 ± 0.1 1.75 ± 0.1 5.5 ± 0.05
A W Nmin W1 W2max
180 12 60 12.4 + 2 18.4
OHA04563
(G) GROUP:
1234567890(1T) LOT NO: (9D) D/C: 1234
(X) PROD NO: 123456789
(6P) BATCH NO: 1234567890
LX XXXX
RoHS Compliant
BIN1: XX-XX-X-XXX-X
MLX
Temp STXXX °C X
Pack: RXX
DEMY XXX
X_X123_1234.1234 X
9999(Q)QTY:
SemiconductorsOSRAM Opto
XX-XX-X-X
EXAMPLE
X_X123_1234.1234 XX_X123_1234.1234 X
EXAMPLE
EXAMPLE
EXAMPLE
XXXXXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-XXX-XX-X-X
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
XXXXXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-XXX-XX-X-X
EXAMPLE
Pack: RXX
XXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-X
EXAMPLE
Pack: RXXPack: RXX
DEMY DEMY
EXAMPLE
12341234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:(9D) D/C: 12341234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
12341234
EXAMPLE
Pack: RXXPack: RXX
DEMY
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:(9D) D/C:
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C: 1234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
12345678901234567890EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(6P) BATCH NO:(6P) BATCH NO: 12345678901234567890
SemiconductorsSemiconductors
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(6P) BATCH NO:(6P) BATCH NO: 12345678901234567890EXAMPLE
SemiconductorsSemiconductorsOSRAM OptoOSRAM Opto
EXAMPLE
EXAMPLE
1234567890
X_X123_1234.1234 X
Pack: RXX
DEMY
X_X123_1234.1234 X
(9D) D/C: 1234(9D) D/C:
1234567890(6P) BATCH NO: 1234567890
OSRAM Opto
XXX
X_X123_1234.1234 X
XX-XX-X-X
Pack: RXX
DEMY
Semiconductors
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately afterbag opening.
Discard if circles overrun.Avoid metal contact.
WET
Do not eat.
Comparatorcheck dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10%bake units
bake units
If wet,
change desiccant
If wet,
Humidity IndicatorMIL-I-8835
If wet,
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
2016-04-01 10
Version 1.8 SFH 2400
Transportation Packing and Materials
Dimensions of transportation box in mm
Width Length Height
195 ± 5 195 ± 5 30 ± 5
OHA02044
PACKVAR:
R077Additional TEXT
P-1+Q-1
Multi TOPLED
Muste
r
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
10
(9D) D/C:
11(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY: 2000
0144
(G) GROUP:
260 C RT240 C R
3
220 C R
MLBin3:Bin2: Q
-1-20
Bin1: P-1-20
LSY T6762
2a
Temp ST
R18DEMY
PACKVAR:
R077Additional TEXT
P-1+Q-1
Multi TOPLED
Muste
r
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
10
(9D) D/C:
11(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY: 2000
0144
(G) GROUP:
260 C RT240 C R
3
220 C R
MLBin3:Bin2: Q
-1-20
Bin1: P-1-20
LSY T6762
2a
Temp ST
R18DEMY
OSRAM
Packing
Sealing label
Barcode label
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
Barcode label
Version 1.8 SFH 2400
2016-04-01 11
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of
OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be
endangered.
2016-04-01 12
Version 1.8 SFH 2400
Glossary
1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily
correspond to the actual parameters of each single product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data
will be changed without any further notice.
2016-04-01 13
Version 1.8 SFH 2400
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.