Download - Shop math trig
Shop Math
Shop MathRight Triangle Applications For CNC Programming 4/18/2014
By Richard Wade
4/18/2014
You will need a calculator similar to this
4/18/2014
unless you would rather work out the trigonometric functions on a circle. This is how they were constructed before calculators.
= 90
Remember two things about Right Triangles:The angles of all three corners for any triangle will add up to 180
4/18/2014One of the corners must be exactly 90 degrees.
4/18/2014
If one of the corners is exactly 90 degrees The other two corners must add up to exactly 90 degrees!
226890 - 22 = 68
4/18/2014Three Basic Trigonometry Functions: Sine CosineTangent
4/18/2014The two most common applications of Right Triangle Trigonometry in CNC Machining: 1. Bolt Circle calculations. 2. Turning chamfers and/or angles.
4/18/2014
A Bolt Circle is a method for defining hole position using a theoretical circle that passes through the center of a series of holes.
4/18/2014
4 HOLES EQ SPCD ON A 3.25 B.C.
20Typical Information Given
4/18/2014
One can almost imagine an arrow notched in the bow.
4/18/2014
4 HOLES EQ SPCD ON A 3.25 B.C.
20
You can easily find the hypotenuse from the data given (the bolt circle dimension is a diameter, so divide it in half to get the radius, which is also the hypotenuse of the triangle)
4/18/2014
but the machines control uses X and Y coordinates.
4/18/2014
3.25 2 = 1.6251.625207090 20 = 70What can be deduced from the information given on the part print.
4/18/2014
1.6252070
When going around the Corner, use Cosine!0.55581.625 x 70 COS = 0.55578
4/18/2014
1.6252070When going around the Corner, use Cosine!0.55581.625 x 20 COS = 1.5270
1.5270
4/18/2014
X= 0.5558Y= 1.5270X= 1.5270Y=-0.5558X=-0.5558Y=-1.5270X=-1.5270Y= 0.5558
4/18/2014PracticeIf the hypotenuse of a right triangle is 6.375, and one corner is shown to have a 32 angle, what is the other angle?
What are the lengths of the two other sides?
When you have your answer, press the Enter key.
4/18/2014PracticeIf the hypotenuse of a right triangle is 6.375, and one corner is shown to have a 32 angle, what is the other angle?
What are the lengths of the two other sides?
58 5.4063 and 3.3782 I just know these are the numbers you got, right?
4/18/2014
4/18/2014
15.270?The Tangent function is used to solve for an unknown side when there is a known side and a known non-ninety degree angle.
4/18/2014
1.2500.250
3.12515Typical Information Given (side view of a round part)
4/18/2014
0.25015
1.250
Endpoint X = 1.250 Z = -0.250
Start-point X = ? Z = 0.00?
4/18/2014
0.25015
1.250
Endpoint X = 1.250 Z = -0.250
Start-point X = ? Z = 0.020
0.250 + 0.020 = 0.270
4/18/2014
15.2700.0724When crossing the triangle, cross a T with Tangent!
0.270 x 15 TAN = 0.07235
4/18/2014
0.0724 x 2 = 0.1448 Double the Result And Subtract from the X axis Endpoint.1.250 (0.0724 x 2) = 1.1052
4/18/2014
0.25015
1.250
Endpoint X = 1.250 Z = -0.250
Start-point X = 1.1052 Z = 0.020
1. Find and Solve the Triangle 2. Double X-axis Result 3. Subtract Dia. From X-Endpoint4. Plug Data into Program
4/18/2014
177.750?PracticeWhat is the length of the unknown side? When you have your answer, press the Enter key.
4/18/2014
177.750?PracticeWhat is the length of the unknown side? 2.3694
4/18/2014ReviewWhen using the Hypotenuse (longest side of a triangle) and the angle on the corner youre going around, use the Cosine function. When using a known side and an adjacent angle to get the opposite side (so you have to cross the triangle), use the Tangent function.
4/18/2014