All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:1. Flush the water supply pipes thoroughly to remove any debris.2. For new installations, assemble faucet to sink before installing.3. The highest working pressure for handspray is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar), a pressure reducer is needed. The highest water and environment temperature is 60 ºC. Please keep handspray away from heater, or it may become damaged and cause injury to the user.
835972A-D 1
8690 SINGLE HOLE KITCHEN FAUCET8691 KITCHEN FAUCET WITH PULL-OUT SPRAY8692 8˝ KITCHEN FAUCET
8690 SINGLE HOLE KITCHEN FAUCET8691 KITCHEN FAUCET WITH PULL-OUT SPRAY8692 8˝ KITCHEN FAUCET
BEFORE YOU BEGIN
HANDLE OPERATION
INSTALLATION INSTRUCTIONS
ROUGH-IN DIMENSIONS
Lift the handle gently. Turn clockwise for hot water, counter-clockwise for cold water.
8690 8691 8692
230 205 230
266
Max
.37
Ø32 Ø32Ø32
L=1500MM
5º 5º
20º
835972A-D 4
SERVICE PARTS Kitchen Faucet
880002Plug Button Kit
3010537**Handle
865106**Bonnet
865121Nut
865112Nut
836009Guide
865112Nut
865257Bush(Only for 8691A)
831752Check Valve(Only for 8691A)835696Washer(Only for 8691A)
834793Valve
880086O-Ring
871128O-Ring
871128O-Ring
836316O-Ring
836316O-Ring
865119**Collar Ring
865119**Collar Ring
77091Escutcheon Kit(Only for 8692)
834562**Aerator(837261** for Thailand)
836669Mounting Hardware 836669
Mounting Hardware
865127Mounting Stud
1024405Inlet Hose
1024405Inlet Hose
834515**Hose
871425Plastic Ring
880091Water Flow Restircter(Only for 8691X)
835636Washer
1229483Valve Seat(1057513 only for 8691A)
835636Washer
3006340Lip Washer
77420Filter Washer
835636Washer
835636Washer
837057**Hand Spray
832687Lead weight
1061638Check Valve(Only for 8691A)
1229482Mounting Stud
G1/2˝ G1/2˝
G1/2˝
**Color code must be specified when ordering
210
63.5
165
13018
5
175
195
190
385
Max
.4720
049
5
Max
.47
240
440
Kitchen Faucet
3005433Mounting Nut Assy.
835972A-D 2
How To Install The Escutcheon(Three-hole Sink)
For 8692 Only
Apply a ring of plumbers putty on the underside of the escutcheon(4). Put the O-ring(1) into the chamfer of the spacer(2). Center the spacer over the center hole of the lavatory with the O-ring side down. Cover the holes on both sides with the gaskets(3). Position the escutcheon (4) over the spacer and the gasket.
Put the escutcheon washer(5) into the hole of the escutcheon.
Put the filter washer(21) into the connector(19) and thread it to the shank(12). Lock the hose connector(20). Do not over tighten it.
INSTALLATION
How To Install The Faucet
For 8690, 8692 Only
Put the O-ring(6) into the groove of the body assembly.(NOTE: There is no O-ring for 8692. Install the faucet onto the escutcheon directly.) Screw the mounting stud(7) into the hole(B) of the faucet. Install the flexible supply hoses(8) into the inlet holes (A) of the faucet through the hole of the sink. Tighten them by hand only. Using a wrench may damage the hoses.
From underside of sink, place washer(9), bracket(10) and nut(11) onto the mounting stud. Position the faucet so that mounting stud is toward the front. Tighten the nut to secure the faucet to the sink.
Attach the hoses to water supplies. When facing the front of the faucet, the left hose is hot water, the right hose is cold water.
For 8691 Only
Slide the O-ring(13) and the guide(14) into the groove of the body. Put the hoses into the mounting hole of the sink. Let the bottom of the body against the deck.
From underside of the sink, place the washer(15), bracket(16) and nut (17) onto the mounting stud(12). Position the faucet so that mounting stud is toward the back and the two hoses is symmetrical. Tighten the nut to secure faucet to sink.
Attach the hoses to water supplies(For 8691A, thread the bushes(18) into the water supplies firstly, then attach the hoses to water supplies). When facing the front of the faucet, the left hose is hot water, the right is cold water.
835972A-D 3
CLEANING INSTRUCTIONS
Ensure that all coupling nuts are tight. Ensure that the lever handle is in the off position.Turn on the main water supply and drain, and check for leaks. Repair as needed.
8690, 8692Remove the aerator(22). Run hot and cold water through the faucet for about a minute to remove any debris.
Remove any debris from the aerator. Shut off the faucet, and reinstall the aerator.
8691Remove the hand spray(24), filter washer(25) and aerator(23). Run hot and cold water for about a minute to remove any debris. Remove any debris from the filter washer and aerator. Shut off the faucet. Reinstall the filter washer, aerator and hand spray.
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with a clean soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. which could adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
How To Use Hand Spray
Press the button(H), (G) for two different forms of water flow, as figure (a), (b) shown. The minimum water pressure is 0.03MPa(0.3bar).
If you want to use the hand spray by hand, take the hand spray and pull out the hose. NOTE: Please pull it gently, or you may damage the hose, connector and loosen the faucet.
INSTALLATION CHECKOUT
24
22
G
H
a
b
20
12
2119
5
3
3
4
2
1
15
98
11
10
13
14
12
A B
18
17
7
6
16
23
25
Escutcheon Kit