Selection GuideYour everyday challenges solved. Every day.
Industrial solutions. 3M Industrial Adhesives and Tapes.
3M Industrial Adhesives and Tapes
Choose the Right 3M Product for the Application
3M Industrial Adhesives and Tapes
Types of Stress, Surface Energy, Surface Preparation and Application
Industrial Tapes for Marking
Reclosable Fasteners
VHB™ Tapes
Aerosol Adhesives and Cleaners
Masking Tapes
Duct, Cloth and Sealing Tapes
PVC Electrical Tapes
Packaging Solutions
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
3M Industrial Adhesives and Tapes
Types of Stress
TensileStress acts perpendicular to bond plane
ShearStress acts parallel to bond plane
Preferred DesignWith tensile and shear forces, entire bond area contributes to strength
Not Preferred DesignWith both cleavage and peel forces, the stresses are concentrated at the leading edge
Cleavage Stress between two rigid substrates
Peel Stress with at least one flexible substrate
Choose the right tape for the substrate: Adhesives must flow onto the substrate surfaces in order to achieve intimate contact area
High Surface Energy Medium Surface Energy Low Surface Energy
Metal, glass PET, ABS, PVC (rigid), polycar-bonate, polyimide, polyurethane (rigid), acrylic (PMMA). Most paints and coatings
Polypropylene, polyethylene, TPO, PTFE, acetyl, PBT, polystyrene, EPDM rubber. Some paints and coatings (PVDF)
Surface Energy
Adhesive
High Surface Energy
Adhesive
Low Surface Energy
1.0
1.0
Tape Surface Preparation and Application
1. Surface Cleaning• To obtain optimum adhesion, the
bonding surfaces must be well unified, clean and dry
• Wipe surface using an appropriate cleaning agent and a clean cloth
• For glass surfaces use the 3M Silane Glass Primer
2. Application• Apply the tape to the surface.
Do not overstretch the tape• Avoid air pockets• Do not touch the adhesive or
adhesive surface• Optimum application temperature
is between 15°C and 25°C
3. Pressure• Bond strength is dependent upon
the amount of adhesive-to-surface contact developed
• Firm application pressure develops better adhesive contact and helps improve bond strength
4. Liner Release• Release the liner in one step
(avoid stops)• Do not touch the adhesive or
adhesive surface
5. Joining and Contact Pressure• Apply substrate to the tape • Avoid air pockets• Bonding pressure of about 2 kg/cm2
6. Wait for Final Adhesion• After application, the bond strength
will increase as the adhesive flows onto the surface
• At room temperature, approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours
• In some cases, bond strength can be increased and ultimate bond strength can be achieved more quickly by exposure of the bond to elevated temperatures (e.g. 66°C for 1 hour)
1.0
1.1
3M™ Industrial Tapes for Marking
Tough jobs
call for even
tougher tapes
Product Number ColourMarking
Floor, Wall, Loading Dock Marking
Hazard Area Marking
Clean Removal
Traffic Areas Key Features
471 ■ Long-term high visibility and abrasion resistance
971 ■ Scuffing from pallets and heavy equipment, fork-lift traffic
764 ■ Economical lane and colour marking in noncritical applications
766 ■ Economical safety marking in noncritical applications
767 ■ Economical safety marking in noncritical applications
5702 ■ Long-term high visibility and abrasion resistance
1.2
Product NumberB: Blister PackD: Dispenser Box
Properties/Suitable for
Closure Cycle Life*
Holding Power
Indoor /Outdoor use
Key Features
SJ352B SJ352D
5000 x
■ Attachment alternative to a wide variety of closures, including zippers, screws, snaps, hooks and more
SJ354B SJ354D
1000 x
■ For use with many plastics (polypropylene, polyethylene, acrylic, polycarbonate and ABS) and powder-coated paints
SJ355Bbk SJ355D
1000 x
■ Bonds to a variety of substrates including metals and plastics such as acrylics, polycarbonate and ABS
SJ356B SJ356D
1000 x
■ Designed to give a translucent appearance (glass, acryl glass (PMMA), polycarbonate)
SJ387B
1000 x
■ For use with powder-coated paints, metals and plastics such as acrylics, polycarbonate and ABS
SJ457D
150 x
■ Low profile attachment for use with powdercoated paints, metals and plastics such as acrylics, polycar-bonate and ABS
*Closings before losing 50% of original tensile strength
A strong, durable
and versatile hold for
ultimate ease
3M™ Dual Lock™ Reclosable Fasteners
Flexible &
bendable
Polypropylene
& polyethylene
Metals &
plastics
Translucent
materials
Powder-coated
paints
Thin – Low-profile
attachment
Product Number Properties/Suitable for
Thickness Material expansion/contraction (dilatation)
Joint gap tolerances
Key Features
59521,1 mm max. 3,30 mm max. 0,55 mm
■ Powder coated paints, metals, glass, sealed wood, acrylic, polycarbonate, ABS
59621,55 mm max. 4,65 mm max. 0,77 mm
■ Powder coated paints, metals, glass, sealed wood, acrylic, polycarbonate, ABS
49101,0 mm max. 1,00 mm max. 0,25 mm
■ Glass, acryl glass (PMMA), polycarbonate
49912,3 mm max. 6,90 mm max. 1,15 mm
■ Aluminum, stainless steel, galvanised steel, polycarbonate, ABS
GPH-110GF
1,1 mm max. 3,30 mm max. 0,55 mm
■ Excellent temperature resistance when bonding metal parts prior to heat cured paint processing
1.3
A strong, fast
and easy way to
create durable,
reliable bonds
3M™ VHB™ Tapes
Powder-coated
paints
Powder-coated
paints
Transparent
materials
Metals &
plastics
High temperature
resistance
3M™ VHB™ Tape Universal Primer UV
■ Enables strong, durable bonds on surfaces like polypropylene, ABS, PET/PBT blends and other difficult to stick to substrates.
VHB™ Surface Cleaner
■ Prepares surfaces for bonding
■ Cleans surfaces to obtain optimum adhesion
1.4
Product Number Properties/Suitable for
Spray Pattern Key Features
Foam Fast 74
■ Immediate foam-tearing strength ■ Soft, non-dimpling bond lines ■ Bonds fabrics, foam and upholstery to a variety of substrates and themselves
Super 77 ■ Fast, aggressive tack for a quick bond ■ Bonds lightweight materials such as fiberglass, foam, polystyrene, paper, felt, wood, plastic and more
Hi-Strength 90
■ High heat and moisture resistance ■ Bonds heavy duty materials such as metals, wood, MDF, laminates, rubber, carpet and flooring and more
Industrial Cleaner
■ Works without harsh chemicals ■ Fresh citrus scent ■ Removes dirt, grease, tar, and many non-curing type adhesives
Multi purpose
Maintenance
& cleaning
Heavy duty
Bonding & cleaning
power – at the touch
of a finger
3M™ Aerosol Adhesives and Cleaners
Foam & fabric
1.5
Product Number Period of use(Days)
TemperatureResistance°C / 1h
Indoor /Outdoor use
Key Features
101E60 °C
■ Light duty paint and joint masking at room temperature
201E80 °C
■ Premium paint and joint masking at increased room temperature
244100 °C
■ Indoor and outdoor applications where UV resistance, clean removal and sharp paint line is required
301E100 °C
■ Industrial paint masking ■ Suitable for air drying and oven curing of paint and lacquer
401E140 °C
■ Industrial and automotive paint masking ■ Suitable for oven-drying systems, IR, or heat lamps
501E160 °C
■ Industrial and automotive paint masking ■ Suitable for UV-curing and bake cycles, oven-drying systems, IR or heat lamps
Temporary
holds you can
count on
1
1
60
2
2
2
3M™ Masking Made Simple
1.6
Product Number Properties/Suitable for
Indoor ⁄Outdoor use
Key Features
1900 ■ Noncritical light-duty sealing and holding applications
2903 ■ General maintenance, bundling, wrapping, attaching, sealing, and protecting
389 ■ Heavy duty industrial and MRO applications
■ Colour marking
8979 ■ Heavy duty industrial and MRO applications
■ Removes cleanly from most opaque surfaces for up to 6 months
4411 ■ Sealing applications like joints, seams, penetration, roof top, roof-to-trim, skylight
■ Conforms over contours, edges, rivets and screw heads for a water tight seal
Built to stick
3M™ Duct, Cloth & Sealing Tapes
General purpose
Value duct tape
Professional
grade
Clean
removal
Extreme sealing
1.7
Product Number Colour Thickness Temperature Use Range
Key Features
Super 33+
0,18 mm -18 to 105 °C
■ Provides premium performance in tough or harsh environments
35
0,18 mm -10 to 90 °C
■ For long-lasting, fade-resistant, cable and wire colour coding
88
0,22 mm -18 to 105 °C
■ Heavy duty for outdoor, high vibration and abrasive applications
1500
0,15 mm 0 to 90 °C
■ For daily insulation, harnessing and wire marking
The professional’s
choice for electrical
maintenance
and repair
Scotch® and 3M™ PVC Electrical Tapes
1.8
Product Number Properties/Suitable for
Key Features
371 ■ Light weight packaging ■ Meets FDA requirements for indirect food contact
309 ■ Light weight packaging ■ For colder and damper applications
8953 ■ Light weight bundling and reinforcing
8959 ■ Medium weight bundling and reinforcing
Box Sealing Tape Dispenser H-180
■ Portable, lightweight, easy to operate, hand held dispenser with a retractable blade
Dependable,
secure containment
and easy
application
3M™ Packaging Solutions
Low noise
Colder & damper
Mono-directional
fiberglass
reinforced
Bi-directional
fiberglass
reinforced
Economical
General purpose
Product UseAll statements, technical information, and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluates the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method or application. All questions of liability relating to this product are governed by the terms of the sale subject, where applicable, to the prevailing law.