Secure the EZ-IO™Tape and Tag!
Monitor the infusion site !Attach wristbandAttach wristband
To remove the EZ-IO™ catheter, grasp hub and rotate clockwise while gently pulling. You may
consider attaching a syringe for this purpose.
Remove the catheter within 24 hours
DO NOT ROCKDO NOT ROCKOR BEND THE OR BEND THE
CATHETERCATHETER
MAINTAINMAINTAINA 90 DEGREEA 90 DEGREE
ANGLE ANGLE
Once catheter has been removed dress site with antibiotic ointment and Band-Aid
Possible complications of IO Extravasation
Dislodgment
Compartment Syndrome
Fracture
Pain
Reduced Flow
Infection
Care & MaintenanceCare & Maintenance
Cleaning & Disinfecting Cleaning & Disinfecting Wipe clean with moistened cloth - removing
large contaminants
Spray with anti-microbial solution - follow manufacturer
instructions
Momentarily depress trigger several times during cleaning
Remove battery cap (if necessary) - and clean seal
Clean around drive shaft with cotton applicator - check drive shaft
tip to ensure nothing has attached to the magnetic tip
Wipe dry
Inspect driver and return to case
DO NOT SUBMERGE DRIVER AT ANY TIME
Wipe clean with moistened cloth - removing large contaminants
Spray with anti-microbial solution - follow manufacturer
instructions
Momentarily depress trigger several times during cleaning
Remove battery cap (if necessary) - and clean seal
Clean around drive shaft with cotton applicator - check drive shaft
tip to ensure nothing has attached to the magnetic tip
Wipe dry
Inspect driver and return to case
DO NOT SUBMERGE DRIVER AT ANY TIME