Download - SCE - Express Solutions
-
7/30/2019 SCE - Express Solutions
1/90
Solutions
Directory20102012
Fourth Edition, November 2011
-
7/30/2019 SCE - Express Solutions
2/90
Providing
SolutionsThis Solutions Directory is a reerence guide that contains the most complete and current list
o eligible equipment (solutions) and qualication criteria or incentives available to customersthrough SCEs 20102012 Energy Eciency Program cycle*. It also includes a summary oDemand Response Technology Incentives available or customers installing qualied equipmentthat enables load-shiting strategies. You can also use our Energy Management Solutions Guides(Guides). These include a listing o the typical solutions used by customers within select segmentsto help you create a comprehensive energy management plan and/or projects or yoursel.
Comprehensive Energy Management includes Energy Eciency and Demand Responseprograms. Energy Efciencyprojects lead to permanent reductions in energy usage, usually byupgrading equipment and optimizing building system design. Demand Responseprograms oersimple ways to reduce your electrical bill by agreeing to temporarily reduce or shit your electricalconsumption when requested by SCE.
For more complex project challenges involving multiple technologies, and/or installations atmultiple project sites, ask your SCE Account Representatives about SCEs consultative approachto project development. Your SCE Account Representative, SCE Field Engineers, and Third PartyEngineering rms will work with you and/or your in-house team to help scope your comprehensiveenergy management project. This collaboration helps ensure upront agreement on operatingcost, capital cost, energy savings and incentive estimates.
The Online Application Tool (the tool), ound at www.sce/onlineapp.com, is another easy andreliable way or you or your Authorized Agent (designated contractor) to calculate energy savingsand submit your Energy Management Solutions (EMS) Incentives Application or your project.The Tool will also help you satisy two requirements or your Incentives Application. TheApplication Terms & Conditions includes a new certication requirement. Customers o InvestorOwned Utilities submitting Incentive Applications are now required by the Caliornia PublicUtilities Commission, Caliornia Energy Commission, and the Contractors State License Board
to sign and certiy that they will/have used a license contractor, where applicable, and will/haveobtained all required permits or their energy management installation. Also, or projects using anAuthorized Agent, a completed Authorized Participant Agreement must be submitted with everyEMS Incentives Application (visit www.sce.com/contractor to learn more).
Both the Solutions Directory and the Guides reerence documents are available online atwww.sce.com/applicationandtools. Both are updated quarterly; however, the Solutions Directorywill always contain the most complete and current list o equipment (solutions) andqualication criteria.
* Programs are unded by Caliornia utility customers and administered by Southern Caliornia Edison under the auspices o the Caliornia Public Utilities
Commission. Programs are oered on a frst-come, frst-served basis and are eective during the Program cycle or until unding is expended or the program
is discontinued by the Caliornia Public Utilities Commission. Programs may be modifed or terminated without prior notice.
-
7/30/2019 SCE - Express Solutions
3/901
Table of
ContentsEnergy Eciency Incentives
Lighting 4
Linear Fluorescent 4
Pulse-Start or Ceramic Metal Halide 11
High Intensity Discharge (HID) 13
Induction 14
Light Emitting Diode (LED) 16
Compact Fluorescent Fixtures 19
Cold Cathode 21
Lighting Controls 22
Food Service 25
Cooking Equipment 25
Holding Cabinets 28
Commercial Ice Machines 29
Commercial Reach-in Rerigeratorsor Freezers 31
Rerigeration 33
Rerigeration Curtains 33
Doors 33
Rerigeration Motors 34
Display Cases 35
Insulation 39
Condenser 40
Compressor 40
Rerigeration Systems 40
Rerigeration Controls 41
Building Envelope 44
Window Film 44
Window 45
Building Shell Improvements 45
Water Heating 46
Water Heater 46
Heating, Ventilating andAir Conditioning (HVAC) 47
Direct Expansion (DX) Equipment 47
Evaporative Coolers 48
Economizers 49
Chiller 49
Insulation 49
Cooling Tower 50
Compressor 50
Condenser 50
HVAC Systems 51
HVAC Controls 51
Oce Equipment 53
Copier 53
Computers 53
Oce Equipment Controls 54
Motors 56
Premium Eciency Motors 56
Pumping 57
Irrigation 57
Pumps 58
Pumping System Optimization 58
Pumping Controls 59
Process 60
Fans 60
Compressed Air 60Compressed Gases 61
Dryer 61
Chiller 61
Heat Exchanger 62
Process System Optimization 62
Extruders 63
Injection Molding Machine 63
Insulation 64
Grinder 64
Melter 64Oven 65
Desalter 65
Blower 65
Process Controls 66
Storage Tanks 66
Battery Charging 67
Laminator 67
Wet Cleaning 67
Demand Response
Options 68
Dual Enrollment 74
Appendix 76
Online Application Instructions 86
Indicates a new technology category and/or updated qualiying criteria.
-
7/30/2019 SCE - Express Solutions
4/902
EXPRESS SOLUTIONS
Fill out the appropriate sections o theIncentives Application using the SolutionCodes, Solution Descriptions and IncentiveAmounts listed on the ollowing pages.
I your project installation isalready complete, upon approval oyour application, SCE will issue anincentive check.
I your project installation will becompleted ater you submit theapplication, SCE will send you anInstallation Report. Ater your projectis completely installed, submit theInstallation Report with the requiredsupporting documentation to receiveyour incentive check.
Return the completed applicationto SCE. I your project installation isalready complete, please include therequired supporting documentation(invoice, manuacturers specicationsproduct sheet).
Applications or Express Solutionscan be submitted or qualiyingequipment that is already installed oror equipment that will be installed aspart o a uture comprehensive projectincluding Customized Solutions.
Apply
Energy EfciencyIncentives
Express Solutions oer companies aquick way to receive an incentive orqualiying Energy Eciency projects.These projects are associated with avariety o standard or high-volumeequipment or technology such astypical lighting, air conditioning andood service improvements projects.Incentives are paid on a per-unit basis(e.g., lamp, xture, horsepower).
Incentive inormation or qualiyingequipment is located on theollowing pages.1
Express Solutions eligibilityrequirements are located in theAppendix on page 74, and online atwww.sce.com/Express_Solutions.
Answers should be Yes to everyapplicable question in an ExpressSolutions category to be eligible orthat incentive. I you dont know theanswer to the question, please contactyour SCE Account Representative.I you dont know who your SCEAccount Representative is, please call(800) 736-4777 or assistance.
Use the diagram to the right to helpguide you through the process.
Itemized incentives do not require a pre-installation inspection o existing equipmentunless a project with similar equipmentreceived an incentive. Projects qualiyingor more than $15,000 in incentives willrequire a post-installation inspection o thenew equipment. Projects under $15,000 willbe subject to a random post-installationinspection.
How do I apply
or an ExpressSolution?
What is an
Express Solution?
How do I qualiyor an Express
Solution?
1. SCE pays up to 100% o the individual equipment costor qualiying standard equipment incentives. For complete
terms and conditions, go to www.sce.com/solutions.
-
7/30/2019 SCE - Express Solutions
5/903
CUSTOMIZED SOLUTIONS
Complete and return the InstallationReport with the required supportingdocumentation to SCE.
A qualied SCE contractor arranges apre-inspection o existing equipment.
Receive a Project Approval Letter, an
Installation Report and SCE Agreement.
Return the completed application to SCE.
Sign and return the Agreement to SCE.
Proceed with the installation o project.
A qualied SCE contractor arrangespost-inspection o the new equipment.
SCE will issue an incentive check.
FIND THE ENERGY MANAGEMENT SOLUTIONS INCENTIVES
APPLICATION ONLINE AT WWW.SCE.COM/SOLUTIONS.
Mail completed paper applications to:
Southern Caliornia Edison, Business IncentivesP.O. Box 800, Rosemead, CA 91770-0800
Questions? Call (800) 736-4777
We encourage you to use the Online ApplicationTool available on www.sce.com/solutions to
complete and submit your application.
Fill out the appropriate sections o theIncentives Application using the SolutionCodes, Solution Descriptions and IncentiveAmounts listed on the ollowing pages.
Customized Solutions are or all othereligible solutions or technologies thatare not part o the Express Solutionsoerings. Incentives are paid on aproject-by-project basis and actual kWhand kW savings. SCE pays up to 50% othe projects cost labor, material andequipment based upon xed incentiverates or actual energy (kWh) anddemand (kW) savings.
Customized Solutions inormationis located in the tables on theollowing pages.
Customized Solutions eligibilityrequirements are located in theAppendix on page 78, and online atwww.sce.com/Customized_Solutions.
Use the diagram to the right to helpguide you through the process.
For most solutions, the OnlineApplication Tool on www.sce.com/solutions can be used to calculateenergy savings and to submit the
required calculations or your project.
Actual energy and demand savings arecalculated on a project-by-project basis.Pre- and post-inspections are required,and monitoring and verication oinstalled equipment may be required.
How do I qualiy
or a Customized
Solution?
How do I applyor a Customized
Solution?
What is a
CustomizedSolution?
-
7/30/2019 SCE - Express Solutions
6/90
Energy EfciencyIncentives
4
All new lighting xtures, retrot kits, and components must carry the appropriate,designated Underwriters Laboratory (UL) or Edison Testing Laboratory (ETL) label.
Customer should make sure that new lighting equipment is compatible with existingequipment and controls.
When applicable, lighting xtures must meet existing case and proposed caserequirement tables.
New xture or lamp wattage must be less than the wattage o lamp being replaced.
GENERAL
LIGHTINGELIGIBILITY
REQUIREMENTS
LIGHTING
A linear fuorescent lamp or fuorescent tube is a gas-discharge lamp that uses electricityto excite mercury vapor to create useul light.
LINEAR
FLUORESCENT
INTERIOR STANDARD T8 LAMP TO REDUCED WATTAGE T8 LAMP RETROFITLamp-only retrot to a newer generation 4 -oot, 80+ Color Rendering Index (CRI) T8 lamp that uses 28 or 25 watts.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are the new T8 lamps CEE-approved? Approved lamps can be ound at www.cee1.org/com/com-lt/RW-lamps-ballasts.xlson tab RWLamp Update. Please reer to the specic tabs.
Are existing 4-oot 32-watt T8 fuorescent lamps being replaced, one or one, with 4-oot 28-watt or 25-watt T8 fuorescent lamps?This incentive applies to lamp-only retrots. Please reer to the ballast manuacturer specication sheets.
Note: This solution can be combined with the T8 interior lamp and electronic ballast solution i existing T12 lamps are replaced withreduced wattage T8 lamps. Please reer to the T8 or T5 Linear Fluorescent Lamps and Electronic Ballasts section on pages 67 oradditional solutions. Also, installing reduced wattage lamps will result in lower light output.
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/unit o measure
T8 to T8 reduced wattage interior lamp-only retrot:
LT-21844 32 watts to 28 watts $1.00 / lamp
LT-97103 32 watts to 25 watts $1.50 / lamp
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/kWh $/kW1
Interior linear fuorescent lighting:
LT-51003 Interior linear fuorescent retrots $0.05 $100
LT-58431 Other interior linear fuorescent lighting $0.05 $100
Customized Solution
Express Solution
http://www.cee1.org/com/com-lt/RW-lamps-ballasts.xlshttp://www.cee1.org/com/com-lt/RW-lamps-ballasts.xls -
7/30/2019 SCE - Express Solutions
7/905
linearfluorescent, continued
INTERIOR STANDARD T8 LAMP AND BALLAST TO REDUCED WATTAGE T8 LAMP ANDELECTRONIC BALLAST RETROFITLamp and ballast(s) retrot to a newer generation 4-oot, 80+ CRI T8 lamp that uses 28 or 25 watts and high-eciency ballast(s).
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are the new T8 lamps and ballasts CEE-approved? Approved lamps and ballasts can be ound at www.cee1.org/com/com-lt/RW-lamps-ballasts.xls.
Are existing 4-oot 32-watt T8 fuorescent lamps and ballast(s) being replaced, one or one, with qualiying 4-oot 28-watt or 25-wattT8 fuorescent lamps and ballast(s)? Existing ballasts should be able to support 28 or 25 watt lamps. Please reer to the ballastmanuacturer specication sheets.
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/unit o measure
T8 to T8 reduced wattage interior lamp and ballast retrot:
LT-84012 28 watts $2.50 / lamp
LT-67100 25 watts $4.00 / lamp
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/kWh $/kW1
Interior linear fuorescent lighting:
LT-51003 Interior linear fuorescent retrots $0.05 $100
LT-58431 Other interior linear fuorescent lighting $0.05 $100
Customized Solution
Express Solution
http://www.cee1.org/com/com-lt/RW-lamps-ballasts.xlshttp://www.cee1.org/com/com-lt/RW-lamps-ballasts.xlshttp://www.cee1.org/com/com-lt/RW-lamps-ballasts.xlshttp://www.cee1.org/com/com-lt/RW-lamps-ballasts.xls -
7/30/2019 SCE - Express Solutions
8/90
Energy EfciencyIncentives
6
linearfluorescent, continued
INTERIOR T12 DE-LAMPINGEliminating excess lamps per xture in conjunction with a new T8 or T5 lighting system while maintaining adequate lighting levels.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are existing T12 lamps/ballasts and unused lamp holders (tombstones) permanently being removed rom existing x tures?
Are less than or equal to hal o the existing lamps and ballasts (along with lamp holders) being removed rom each xture?
Is the total number o lamps being claimed or de-lamping less than or equal to the number o replacement T8 or T5 lampsbeing installed?
Will de-lamping maintain adequate light levels? Customer is responsible or deciding whether de -lamping will maintainadequate light levels.
Is de-lamping being claimed in conjunction with T8 or T5 replacements? De-lamping alone is not eligible. Also, removing lampsrom a T12 xture that is not being retrot ted with T8 lamps is not eligible or this incentive.
T8 OR T5 LINEAR FLUORESCENT LAMPS AND ELECTRONIC BALLASTSRetrot existing T12 lamp and ballast to a T8 or T5 lamp and ballast.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Note: Eective April 1st, 2010, 4-oot T8 lamps and ballasts must be listed as High-Perormance (HP) T8 lamps and HP ballasts, and be listed
atwww.cee1.org/com/com-lt/com-lt-main.php3.
Are T12 lamps and magnetic ballasts being replaced, one or one, with T8 or T5 lamps with electronic, high-requency (greater than
or equal to 20 kHz) ballasts?
Do the proposed ballasts have a power actor o greater than or equal to 0.90?
At ull light output, do ballasts have a total harmonic distortion o less than or equal to 20%?
Will programmed start/programmed rapid-start ballasts be used or T5 lamp installations?
Will T5 lamps being replaced in low bay installations (under 15') provide indirect lighting only? Customers installing T5 lamps ordirect lighting in low ceilings should consult a lighting proessional to address the possibility o excessive glare.
Do T8 and T5 replacement lamps and ballasts meet the color rendering index (CRI) and rated lamp lie standards listed in the Lampand Ballast Requirements table? Manuacturers specication sheets or lamps and ballasts must be provided.
LAMP TYPE AND SIZE BALLAST TYPE CRIMINIMUM RATED LAMP
LIFE (3 HRS/START)
T 8 2-oot , 3 -oot Programmed star t / programmed rapid-star t > 80 24,000 hours
T 8 2-oot , 3 -oot , 8-oot Instant star t > 80 18,000 hours
T5 All sizes Programmed start or programmed rapid-start > 82 20,000 hours
LAMP AND BALLAST REQUIREMENTS
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
http://www.cee1.org/com/com-lt/com-lt-main.php3http://www.cee1.org/com/com-lt/com-lt-main.php3 -
7/30/2019 SCE - Express Solutions
9/907
linearfluorescent, continued
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/unit o measure
T8 interior lamp and electronic ballast:
LT-46109 2-oot (T12 replacement only) $4.50 / lamp
LT-12877 3-oot (T12 replacement only) $5.50 / lamp
LT-89585 4-oot high-perormance lamps and ballasts (T12 replacement only) $5.50 / lamp
LT-58109 8-oot (T12 replacement only) $9.00 / lamp
T5 interior lamp and electronic ballast:
LT-61312 2-oot (T12 replacement only) $4.50 / lamp
LT-18642 3-oot (T12 replacement only) $5.50 / lamp
LT-94378 4-oot (T12 replacement only) $5.50 / lamp
LT-73491 8-oot (T12 replacement only) $9.00 / lamp
T5 or T8 interior lamp:
LT- 34 812 2-oot lamp removed ( T12 replacement only) $ 6.0 0 / lamp
LT- 482 99 3 -oot lamp removed ( T12 replacement only) $ 6.0 0 / lamp
LT-7 73 41 4 -oot lamp removed (T12 replacement only) $ 8.0 0 / lamp
LT-2 719 7 8 -oot lamp removed ( T12 replacement only) $ 20.0 0 / lamp
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/kWh $/kW1
Interior linear fuorescent lighting:
LT-51003 Interior linear fuorescent retrots $0.05 $100
LT-58431 Other interior linear fuorescent lighting $0.05 $100
Customized Solution
Express Solution
The ollowing solutions are available or both T8 or T5 Linear Fluorescent Lamps and Electronic Ballasts andDe-Lamping.
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
-
7/30/2019 SCE - Express Solutions
10/90
Energy EfciencyIncentives
8
linearfluorescent, continued
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/unit o measure
T5HO to T5HO reduced wattage interior lamp-only retrot:
LT-30612 47-51 watts $2.00 / lamp
T5HO TO T5HO REDUCED WATTAGE INTERIOR LAMP-ONLY RETROFITLamp-only retrot to a newer generation 4-oot, 82+ CRI T5 high output (T5HO) lamp that uses 47, 49, 50 or 51 watts.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are existing 46" 54-watt T5HO fuorescent lamps being replaced, one or one, with 46" 47-watt to 51-watt T5HO fuorescent lamps? Thissolution applies to lamp-only retrots.
Do the T5HO replacement lamps have a CRI rating o 82 or greater?
Do the T5HO replacement lamps have a lamp lie rating o 20,000 hours or greater? All lamps must meet the minimums o rated lamp lieat 3 hours/start.
SOLUTIONCODE
SOLUTION DESCRIPTION FOR LINEAR FLUORESCENTINCENTIVE
$/kWh $/kW1
Interior linear fuorescent lighting:
LT-51003 Interior linear fuorescent retrots $0.05 $100
LT-58431 Other interior linear fuorescent lighting $0.05 $100
Customized Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
-
7/30/2019 SCE - Express Solutions
11/909
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/unit o measure
Interior linear fuorescent xtures:
LT-41199 < 100-wat t lamp existing, up to 64-wat t replacement xture $25. 00 / xture
LT-12 86 6 1 01- t o 17 5- wa tt lam p ex is ti ng , up t o 12 8- wa tt r ep lace men t xt ur e $ 35 .0 0 / xt ur e
LT- 84 912 1 76 - t o 3 99 -wa tt l amp e xi st ing , up t o 19 2- wa tt r ep lace men t xt ur e $ 50 .0 0 / xt ur e
LT-55943 400-watt lamp existing, 245- to 360-watt replacement xture (Tier 2) $50.00 / xture
LT-26100 400-watt lamp existing, up to 244-watt replacement xture (Tier 1) $100.00 / xture
LT-92448 > 400-watt lamp existing, up to 600-watt replacement xture $200.00 / xture
INTERIOR LINEAR FLUORESCENT FIXTUREST8, T5, or T5/high output linear fuorescent xtures replacing less ecient light source, such as T12 fuorescent or mercury vapor.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are complete new T8 or T5 or T5HO xtures being installed?
Will the new xtures have a wattage equal to or less than the maximum wattage listed in the table below or each range o lampwattage being replaced and have a lower wattage than the xture being replaced?
Will xtures be equipped with linear fuorescent lamps and ballasts that meet the specications dened in the T8 or T5 LinearFluorescent Lamps with Electronic Ballasts category? All 4-oot T8 lamps and ballasts must be listed as High Perormance (HP) T8lamps and HP ballasts, and be listed at www.cee1.org/com/com-lt/com-lt-main.php3.
Are new xtures replacing, one or one, existing incandescent, mercury vapor, T12 fuorescent, standard metal halide, pulse-startmetal halide or high-pressure sodium xtures in interior installations? Existing exterior installations do not qualiy.
Will all replacement xtures be hardwired?
Is this the only Express Solution category under which the xtures are receiving incentives?
Will xtures be installed at a height over 12' above the nished foor to qualiy or 400-wat t and greater-than-400-watt categories?
linearfluorescent, continued
SOLUTIONCODE
SOLUTION DESCRIPTION FOR LINEAR FLUORESCENT INCENTIVE$/kWh $/kW1
Interior linear fuorescent lighting:
LT-51003 Interior linear fuorescent retrots $0.05 $100
LT-58431 Other interior linear fuorescent lighting $0.05 $100
Customized Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
http://www.cee1.org/com/com-lt/com-lt-main.php3http://www.cee1.org/com/com-lt/com-lt-main.php3 -
7/30/2019 SCE - Express Solutions
12/90
Energy EfciencyIncentives
10
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/unit o measure
Interior bi-level stairwell/ hall/enclosed garage fuorescent xture:
LT-69302 T8 linear fuorescent xture existing, to dimming fuorescent xture $25.00 / xture
LT-48107 T8 linear fuorescent xture existing, to on/o fuorescent xture $25.00 / xture
LT-38702 T12 linear fuorescent xture existing, to dimming fuorescent xture $25.00 / xture
LT-10654 T12 linear fuorescent xture existing, to on/o fuorescent xture $25.00 / xture
linearfluorescent, continued
INTERIOR BI-LEVEL STAIRWELL/HALL/PARKING GARAGE FLUORESCENT FIXTUREA linear fuorescent hardwired xture with electronic ballast and a passive inrared (PIR) or ultrasonic sensor that will reduce the xture wattage by
35% or more during unoccupied periods.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Will all interior replacement fuorescent xtures be hardwired? Exterior installations do not qualiy.
Are new xtures equipped with electronic ballasts and manuacturer-integrated occupancy sensors?
Are all installed lamps pin-based? All 4-oot T8 lamps and ballasts must be listed as High Perormance (HP) T8 lamps and HP ballasts,and be listed at www.cee1.org/com/com-lt/com-lt-main.php3.
Are the manuacturer-integrated sensors PIR and/or ultrasonic controlling individual xtures? Fixtures must deault to ull light outputi integrated sensors ail. Fixtures controlled by manual on overrides do not qualiy.
Do the xtures operate at ull light output during occupied periods?
Do the xtures operate at 35% or less o ull wattage during unoccupied periods?
Note: A parking garage is a covered building or structure or the purpose o parking vehicles, which consists o at least a roo overthe parking area enclosed with walls on all sides. Parking garages may have ences, rails, partial walls (pony wall), or other barriers inplace o one or more walls. The structure has an entrance(s) and exit(s), and includes areas or vehicle maneuvering to reach the parkingspaces. I the roo o the parking structure is also used or parking, the section without an overhead roo is considered a parking lotinstead o a parking garage.
Note: Incentive or solution codes LT-39008 and LT-70908 have changed.
SOLUTION
CODESOLUTION DESCRIPTION FOR LINEAR FLUORESCENT
INCENTIVE
$/kWh $/kW1
Interior linear fuorescent lighting:
LT-51003 Interior linear fuorescent retrots $0.05 $100
LT-58431 Other interior linear fuorescent lighting $0.05 $100
Exterior linear fuorescent lighting:
LT-39008 Exterior linear fuorescent retrots $0.05 $0
LT-70908 Other exterior linear fuorescent lighting $0.05 $0
Customized Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
http://www.sce.com/NR/rdonlyres/11FED648-1AA8-4332-A4F9-74C1347D1CBA/0/100624_App_E_filterableV1_7.xlshttp://www.sce.com/NR/rdonlyres/11FED648-1AA8-4332-A4F9-74C1347D1CBA/0/100624_App_E_filterableV1_7.xls -
7/30/2019 SCE - Express Solutions
13/9011
Contains a ceramic tube inside the lamp that heats a mercury-argon mixture, creating abluish light that is close to daylight. A change in the lamp and ballast construction allowspulse-start metal halide lamps to start using a high-voltage igniter in the ballast instead o astarting electrode (probe) in the lamp.
PULSE-START OR
CERAMIC METALHALIDE
INTERIOR PULSE-START METAL HALIDE OR CERAMIC METAL HALIDE FIXTURESNew, hardwired pulse-start or ceramic metal halide xtures (or retrot kits) replacing, one or one, an existing, less ec ient lighting source.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Are complete new pulse-star t or ceramic metal halide xtures or retrot kits being installed?
Are new xtures replacing, one or one, existing incandescent, mercury vapor, T12 linear fuorescent, T12/High Output fuorescent,T12/Very High Output fuorescent standard probe-star t metal halide, or high-pressure sodium xtures in interior installations?
I installing retrot kits, will retrot kits be used on existing mercury vapor, standard metal halide, or high-pressure sodiumxtures only?
Will the new xtures or retrot k its have a wattage equal to or less than the maximum wattage listed in the incentive table thatollows or each range o lamp wattage being replaced and have a lower wattage than the x ture being replaced?
Will xtures be equipped with pulse-start metal halide (PSMH) or ceramic metal halide (CMH) lamps?
Will all replacement xtures be hardwired?
Will xtures be installed at a height over 12 above the nished foor to qualiy or 400-watt and greater-than-400-wat t categories?
Is this the only Express Solution category under which the xtures are receiving incentives?
SOLUTION
CODESOLUTION DESCRIPTION FOR PULS E-START OR CERAMIC METAL HALIDE
INCENTIVE
$/unit o measure
Interior pulse-start or ceramic metal halide (PSMH or CMH) x tures:
LT-50223 < 100-watt lamp existing, up to 70-watt replacement PSMH or CMH lamp $20.00 / xture
LT-38071 101- to 175-w at t lam p exist ing, up to 125-watt rep lacement PSMH or CMH lam p $35.00 / x ture
LT-71883 176- to 399-watt lamp existing, up to 175-watt replacement PSMH or CMH lamp $40.00 / xture
LT-64118 400-watt lamp existing, up to 250-watt replacement PSMH or CMH lamp $75.00 / xture
LT-48241 > 400-watt lamp existing, up to 750-watt replacement PSMH or CMH lamp $90.00 / xture
LT-18932 > 400-watt lamp existing, up to 600-watt replacement PSMH or CMH lamp $150.00 / xture
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
-
7/30/2019 SCE - Express Solutions
14/90
Energy EfciencyIncentives
12
EXTERIOR PULSE-START OR CERAMIC METAL HALIDE FIXTURESNew, hardwired pulse-start or ceramic metal halide xtures (or retrot kits) replacing, one or one, an existing, less ecient lighting source.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Are complete new pulse-start or ceramic metal halide xtures or retrot kits being installed?
Are new xtures replacing, one or one, existing incandescent, mercury vapor, T12 linear fuorescent, T12/high output fuorescent,T12/very high output fuorescent, standard probe-start metal halide, or high-pressure sodium xtures?
I installing retrot kits, will retrot kits be used on existing mercury vapor, standard metal halide, or high-pressure sodiumxtures only?
Will the new xtures or retrot kits have a wattage equal to or less than the maximum wattage listed in the incentive table thatollows or each range o lamp wattage being replaced and have a lower wattage than the x ture being replaced?
Will xtures be equipped with pulse-start metal halide or ceramic metal halide lamps?
Will all replacement xtures be hardwired?
Will xtures be installed at a height over 12 above the nished foor to qualiy or 400-wat t and greater-than-400-wat t categories?
INTEGRATED BALLAST CERAMIC METAL HALIDE PAR LAMPSIntegrated CMH 24- or 25-watt PAR lamp with a lamp lie o at least 10,500 hours.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Does the retrot involve the one or one replacement o existing refec tor-type incandescent, PAR halogen, or PAR halogen inrared(IR) lamps?
Is the integrated ballast CMH PAR lamp 24 or 25 watts?
Does the integrated ballast CMH PAR lamp have a rated lamp lie o 10,500 hours or greater?
Is the integrated ballast CMH PAR lamp compatible with the existing equipment and controls? Customers are responsible ordetermining i the lamp will t in their existing equipment and or veriying compatibility with existing lighting controls.
pulse-startorceramicmetalhalide, continued
SOLUTION
CODESOLUTION DESCRIPTION FOR PULSE- START OR CERAMIC METAL HALIDE
INCENTIVE
$/unit o measure
Exterior pulse-star t or ceramic metal halide (PSMH / CMH) xtures:
LT-63722 < 100-wat t lamp existing, up to 70-wat t replacement PSMH or CMH lamp $15.00 / xture
LT-77822 101- to 175-w at t lam p exist ing, up to 100-w at t rep lacem ent PSMH or CMH lam p $20.00 / x ture
LT-59921 176- to 200-watt lam p exist ing, up to 125-wat t rep lacement PSMH or CMH lam p $25.00 / x ture
LT-35561 201- to 399-watt lamp existing, up to 175-watt replacement PSMH or CMH lamp $25.00 / xture
LT-90144 400-watt lamp existing, up to 250-watt replacement PSMH or CMH lamp $45.00 / xture
LT-44532 > 400-watt lamp existing, up to 750-watt replacement PSMH or CMH lamp $75.00 / xture
SOLUTION
CODESOLUTION DESCRIPTION FOR PULSE- START OR CERAMIC METAL HALIDE
INCENTIVE
$/unit o measure
LT-17432 Integrated ballast ceramic metal halide PAR lamps $17.50 / lamp
Express Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
-
7/30/2019 SCE - Express Solutions
15/9013
pulse-startorceramicmetalhalide, continued
A lamp that consists o a sealed arc tube inside a glass envelope, or outer jacket. The inner arctube is lled with elements that emit light when ionized by electric current. A ballast is requiredto provide the proper starting voltage and to regulate current during operation.
HIGH INTENSITYDISCHARGE (HID)
SOLUTION
CODESOLUTION DESCRIPTION FOR HIGH INTENSITY DISCHARGE (HID)
INCENTIVE
$/kWh $/kW1
Interior HID lighting:
LT-96977 Interior HID retrots $0.05 $100
LT-89706 Other interior HID lighting $0.05 $100
Exterior HID lighting retrots:
LT-78723 Exterior HID retrots $0.05 $0
LT-30958 Other exterior HID lighting $0.05 $0
Customized Solution Items eligible or Customized Solution incentives are shown below.
CERAMIC METAL HALIDE ADJUSTABLE ACCENT LIGHTING FIXTURESA ceramic metal halide (CMH) adjustable accent lighting xture rated 39 watts or less.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Does the retrot involve the one or one replacement o existing refec tor-type incandescent, PAR halogen, or PAR halogen inrared(IR) lamps?
Does the ceramic metal halide adjustable accent lighting xture have a nominal lamp wattage o 39 watts or lower?
Is the ceramic metal halide adjustable accent lighting xture compatible with the existing controls? Customers are responsible orveriying compatibility with existing lighting controls.
Note: In all cases, the wattage o the replacement fxture must be less than the wattage o the existing lamp. The maximum replacementwattage listed in the table that ollows is typically associated with the highest wattage in the base-case range.
SOLUTION
CODESOLUTION DESCRIPTION FOR PULS E-START OR CERAMIC METAL HALIDE
INCENTIVE
$/unit o measure
LT-37736 Ceramic metal halide adjustable accent l ight ing: 39 watts $45.00 / xture
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
-
7/30/2019 SCE - Express Solutions
16/90
Energy EfciencyIncentives
14
Induction lamps are electrodeless lamps where the power needed to generate light istranserred rom the outside o the lamp envelope by means o (electro)magnetic elds.
INDUCTION
INTERIOR INDUCTION FIXTURESNew, hardwired induction xtures replacing, one or one, an existing, less ecient lighting source.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are complete new induction xtures being installed?
Do the new xtures have a lower wattage than the xtures being replaced without exceeding the maximum wattage listed in theincentive table that ollows or each range o lamp wattage being replaced?
Are new xtures equipped with induction lamps and drivers?
Are new xtures replacing, one or one, existing incandescent, mercury vapor, T12/T12 High Output/T12 Very High Output linearfuorescent, standard probe-s tart metal halide, pulse-star t metal halide, or high-pressure sodium xtures in interior installations?
Will all replacement xtures be hardwired?
Will xtures be installed at a height over 12' above the nished foor to qualiy or the 400-watt category?
Is this the only Express Solution Category under which the xtures are receiving incentives? Fixtures are not eligible or additionalincentives under the other solution categories.
SOLUTION
CODESOLUTION DESCRIPTION FOR INDUCTION
INCENTIVE
$/unit o measure
Interior induction xtures:
LT-51211 < 100-wat t lamp existing, up to 70-watt induction lamp $35. 00 / xture
LT- 26 73 4 1 01- t o 17 5- wa tt lam p ex is ti ng , up t o 12 0- wa tt i nduc ti on l am p $ 60 .0 0 / xt ur e
LT- 80 10 8 1 76 - t o 3 99 -wa tt l amp e xi st ing , up t o 18 0- wa tt i nd uc ti on l amp $ 75 .0 0 / xt ur e
LT-34098 400-watt lamp existing, up to 250-watt induction lamp (Tier 1) $125.00 / xture
LT-69009 400-watt lamp existing, up to 360-watt induction lamp (Tier 2) $60.00 / xture
SOLUTION
CODESOLUTION DESCRIPTION FOR INDUCTION
INCENTIVE
$/kWh $/kW1
Interior induction lighting xtures:
LT-64209 Interior induction retrots $0.05 $100
LT-90483 Other interior induction lighting $0.05 $100
Customized Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
-
7/30/2019 SCE - Express Solutions
17/9015
induction, continued
SOLUTION
CODESOLUTION DESCRIPTION FOR INDUCTION
INCENTIVE
$/unit o measure
Exterior induction xtures:
LT-10663 < 100-wat t lamp existing, up to 70-watt replacement xture $25. 00 / xture
LT-60651 101- to 175-watt lamp existing, up to 100-watt replacement xture $45.00 / xture
LT-21067 176- to 200-watt lamp existing, up to 120-watt replacement xture $50.00 / xture
LT-58832 201- to 399-watt lamp existing, up to 180-watt replacement xture $50.00 / xture
LT-78695 400-watt lamp existing, up to 250-watt replacement xture $100.00 / xture
SOLUTION
CODESOLUTION DESCRIPTION FOR INDUCTION
INCENTIVE
$/kWh $/kW1
Exterior induction lighting retrots:
LT-55464 Exterior induction retroits $0.05 $0
LT-87643 Other exterior induction lighting $0.05 $0
Customized Solution
EXTERIOR INDUCTION FIXTURESNew, hardwired induction xtures replacing, one or one, an existing, less ecient lighting source.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are complete new induction xtures being installed?
Is the proposed installation or an exterior application? All installations or this solution are or exterior applications onlyinteriorinstallations do not qualiy.
Are new xtures replacing, one or one, existing incandescent, mercury vapor, T12/T12 High Output/T12 Very High Output linearfuorescent, standard probe-s tart metal halide, or high-pressure sodium xtures in exterior installations? Existing pulse-star tmetal halide installations do not qualiy.
Do the new xtures have a lower wattage than the xtures being replaced without exceeding the maximum wattage listed inthe solutions table that ollows or each range o lamp wattage being replaced?
Are new xtures equipped with induction lamps and drivers?
Will all replacement xtures be hardwired?
Will xtures be installed at a height over 12' above the nished foor to qualiy or the 400-watt category?
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
Note: Incentive or solution codes LT-55464 and LT-87643 have changed.
-
7/30/2019 SCE - Express Solutions
18/90
Energy EfciencyIncentives
16
A solid-state semiconductor device that converts electrical energy directly into light.LIGHT EMITTING
DIODE (LED)
HIGH EFFICIENCY EXIT SIGNSExit signs using LEDs or electroluminescence as a light source in place o incandescent or fuorescent lamps.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are LED or electroluminescent exit signs replacing, one or one, incandescent or compact fuorescent lamps (CFL)? Retrot kits arenot eligible.
Do all new exit signs meet UL-924 requirements?
Will exit signs have a usage level less than or equal to 5 watts and a minimum product lie o 10 years?
Can manuacturers inormation be provided stating the model number? I not, other qualiying specication sheet must besubmitted with each Incentives Application.
Do new exit signs meet local re codes?
LED REFRIGERATED DISPLAY CASE LIGHTING RETROFITA qualied LED xture replacing a 5-oot or 6 -oot T8 or T12HO fuorescent xture in a re rigerated case.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are the LED xtures installed in a rerigerated case? This solution applies to xture-only retrots and incentive is paid on aper door basis..
Are the LED xtures ound in new rerigerated display cases or replacing 5-oot or 6-oot T8, T12, or T12HO fuorescent xtures?
Are the LED xtures utility approved? All LED xtures must be utility approved to receive incentives. For a list o qualiying LEDrerigerated case door lighting xtures please reer to http://www.designlights.org/solidstate.about.QualiedProductsList_Publicv2.php.
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/unit o measure
LT-80693 LED rerigerated display case lighting $50.00 / door
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/kWh $/kW1
Interior LED lighting:
LT-32756 Interior LED rerigeration case lighting $0.05 $100
LT-29684 Other interior LED lighting $0.05 $100
Customized Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
-
7/30/2019 SCE - Express Solutions
19/9017
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/unit o measure
High-eciency LED exit sign:
LT-25510 Incandescent lamp existing $27.00 / xture
LT-85327 Compact fuorescent lamp existing $15.00 / xture
led, continued
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/unit o measure
LED channel signage (red):
LT-74003 Indoor < 2 t $4.00 / t
LT-10063 Outdoor < 2 t $2.00 / t
LT-48213 Indoor > 2 t $6.00 / t
LT-67567 Outdoor > 2 t $3.00 / t
LED CHANNEL SIGNSChannel signs that use light emitting diodes (LEDs) as a light source in place of traditional incandescent or neon-lighted channel letter signs.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are incandescent-lighted or neon-lighted channel letter signs being replaced? Only retrot kits or complete replacement signsusing red LEDs are eligible.
Will the replacement sign use less than or equal to 20% o the actual input power o the sign that it is replacing? Will the signinclude controls that adhere to Title 24 sign requirements?
Has the length o the sign been measured properly? Measure the length o the sign as ollows:
1. Measure the length o each letter at the centerline2. Do not measure the distance between letters3. Add up the measurements o each individual letter to get the length o the entire sign being replaced4. The calculation measurements must be submitted with the Application
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/kWh $/kW1
Interior LED lighting:
LT-80367 LED exit sign $0.05 $100
LT-29684 Other interior LED lighting $0.05 $100
Customized Solution
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/kWh $/kW1
Interior LED lighting:
LT-29684 Other interior LED lighting $0.05 $100
Exterior LED lighting:
LT-46594 Exterior LED advertisement sign/smart sign $0.05 $0
LT-39685 Other exterior LED lighting $0.05 $0
Customized Solution
Express Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
Note: Incentive or solution codes LT-46594 and LT-39685 have changed.
-
7/30/2019 SCE - Express Solutions
20/90
Energy EfciencyIncentives
18
led, continued
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/kWh $/kW1
Interior LED lighting:
LT-58676 Interior LED recessed surace and pendant mounted downlights $0.05 $100
LT-29684 Other interior LED lighting $0.05 $100
Interior LED integral lamps:
LT-12109 Interior LED integral lampsOmnidirectional (A-lamps, etc.) $0.05 $100
LT-84635 Interior LED integral lampsDecorative lamps $0.05 $100
LT-56453 Interior LED integral lampsDirectional lamps (BR, ER, PAR, MR, etc.) $0.05 $100
Customized Solution Items eligible or Customized Solution incentives are shown below.
Customized Solution
ENERGY STAR LIGHT EMITTING DIODE (LED) SURFACE, PENDANT, & RECESSED DOWNLIGHTENERGY STAR qualied LED downlight xtures replacing incandescent or halogen lamps.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are new LED downlight xtures ENERGY STAR-qualied? Visit www.energystar.gov/index.cm?useaction=ssl.display_products_com_html or a list o qualied products.
Are new LED downlights replacing, one or one, existing incandescent or halogen xtures with lamps greater than or equal to 40 watts?
Are new LED downlight xtures less than or equal to 15 watts?
Are new LED downlights compatible with existing lighting controls? Customers are responsible or veriying compatibility with existinglighting controls.
INTERIOR AND EXTERIOR LED LIGHTINGPre-qualied LED xtures ound in interior or exterior applications. Please reer to the Statewide Customized Oering Procedures Manual: Appendix E
and Appendix F or pre-qualied LED products at http://www.sce.com/business/ems/customized-solutions/tools-resources.htm
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/unit o measure
LT-68701 ENERGY STAR LED surace, pendant, and recessed downlight: 15 watts $30.00 / xture
Express Solution
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/kWh $/kW1
Interior LED lighting:
LT-17492 Interior LED xture replacement (utilizing approved luminaires) $ 0.05 $100
LT-47463 Interior LED parking garage luminaires $0.05 $100
LT-91217 Interior LED track or mono-point directional lighting xtures $0.05 $100
LT-58676 Interior LED recessed, surace and pendant-mounted downlights $0.05 $100
LT-78694 Interior LED under-cabinet shel-mounted task lighting $0.05 $100
LT-19123 NEW Interior LED pool lighting $0.05 $100
LT-29684 Other interior LED lighting $0.05 $100
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
http://www.energystar.gov/index.cfm?fuseaction=ssl.display_products_com_htmlhttp://www.energystar.gov/index.cfm?fuseaction=ssl.display_products_com_htmlhttp://www.sce.com/business/ems/customized-solutions/tools-resources.htmhttp://www.sce.com/business/ems/customized-solutions/tools-resources.htmhttp://www.energystar.gov/index.cfm?fuseaction=ssl.display_products_com_htmlhttp://www.energystar.gov/index.cfm?fuseaction=ssl.display_products_com_html -
7/30/2019 SCE - Express Solutions
21/9019
led, continued
Customized Solution Items eligible or Customized Solution incentives are shown below.
Hardwired installation o a compact fuorescent xture replacing less ecient lighting sources,
such as incandescent, mercury vapor, T12 linear fuorescent, standard probe-start metal halide,or high-pressure sodium xture.
COMPACT
FLUORESCENTFIXTURES
COMPACT FLUORESCENT FIXTURES
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are complete new compact fuorescent xtures being installed?
Do the new xtures have a lower wattage than the xtures being replaced without exceeding the maximum wattage listed in theincentive table below or each range o lamp wattage being replaced?
Are new xtures equipped with compact fuorescent lamps (CFLs) and electronic ballasts?
Are CFL ballasts programmed-start or programmed rapid-star t with a power actor (PF) o greater than or equal to 0.90 and totalharmonic distortion (THD) o less than or equal to 20%?
Are new xtures replacing, one or one, existing incandescent, mercury vapor, T12 linear fuorescent, T12/High Output fuorescent,T12/Very High Output linear fuorescent, standard probe-start metal halide, or high-pressure sodium xtures? Existing pulse-startmetal halide installations do not qualiy.
Will all replacement xtures be hardwired?Will xtures be installed at a height over 12' above the nished foor to qualiy or the 400-watt categories?
Is this the only Express Solution category under which the xtures are receiving incentives?
SOLUTION
CODESOLUTION DESCRIPTION FOR LED
INCENTIVE
$/kWh $/kW1
Exterior LED lighting:
LT-85834 Exterior LED xture replacements (utilizing approved luminaires) $0.05 $0
LT-48371 Exterior LED street lighting $0.05 $0
LT-37654 Exterior LED outdoor pole/arm-mounted area and roadway luminaires $0.05 $0
LT-23267 Exterior LED outdoor pole/arm-mounted decorative luminaires $0.05 $0
LT-96754 Exterior LED wall-mounted area luminaires $0.05 $0LT-79301 Exterior LED wall wash luminaires $0.05 $0
LT-68791 Exterior LED bollards $0.05 $0
LT-46594 Exterior LED advertisement sign/smart sign $0.05 $0
LT-23623 NEW Exterior LED pool lighting $0.05 $0
LT-39685 Other exterior LED lighting $0.05 $0
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
Note: Incentives or all solution codes have changed.
-
7/30/2019 SCE - Express Solutions
22/90
Energy EfciencyIncentives
20
SCREW-IN COMPACT FLUORESCENT REFLECTOR LAMPSAn ENERGY STAR compact fuorescent refector lamp with integrated ballast between 14 and 28 watts.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Are the screw-in compact fuorescent refec tor lamps with integrated ballasts listed as ENERGY STAR-qualied?Visit www.energystar.gov or a list o qualiying lamps.
Is the screw-in compact fuorescent refector lamp wattage between 14 and 28 watts?
Does the retrot involve the one or one replacement o existing refector-type incandescent, PAR halogen, or PAR halogen IR lamps?Accent lighting, food lighting, and down lighting all qualiy or this incentive.
SOLUTION
CODESOLUTION DESCRIPTION FOR COMPACT FLUORESCENT FIXTURES
INCENTIVE
$/unit o measure
LT-55729 Screw-in compact fuorescent refector lamps, 1428 watts $7.00 / lamp
compactfluorescentfixtures, continued
Express Solution
SOLUTION
CODESOLUTION DESCRIPTION FOR COMPACT FLUORESCENT FIXTURES
INCENTIVE
$/unit o measure
Interior:
LT-17083 < 100-watt lamp existing, up to 70-watt replacement xture $20.00 / xture
LT-83701 101- to 175-watt lamp existing, up to 128-watt replacement xture $35.00 / xture
LT-33489 176- to 399-watt lamp existing, up to 192-watt replacement xture $40.00 / xture
LT-26133 > 400-watt lamp existing, up to 244-watt replacement xture (Tier 1) $75.00 / xture
LT-84901 400-watt lamp existing, up to 360-watt replacement xture (Tier 2) $45.00/ xture Exterior:
LT-10121 Exterior < 100-watt lamp existing, up to 70-watt replacement xture $17.00 / xture
Express Solution
SOLUTION
CODESOLUTION DESCRIPTION FOR COMPACT FLUORESCENT FIXTURES
INCENTIVE
$/kWh $/kW1
Interior compact fuorescent xture lighting ret rot:
LT-76865 Interior compact fuorescent xture retrots(excluding screw-in CFL) $0.05 $100
LT-67568 Other interior compact fuorescent xture lighting $0.05 $100
Exterior compact fuorescent xture lighting retrot:
LT-58654 Exterior compact luorescent ixture retroit(excluding screw-in CFL) $0.05 $100
LT-45634 Other exterior compact luorescent ixture lighting $0.05 $100
Customized Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
Indicates updated qualiying criteria
http://www.energystar.gov/http://www.energystar.gov/ -
7/30/2019 SCE - Express Solutions
23/9021
COLD
CATHODE
COLD CATHODE FLUORESCENT LAMPS: 2 TO 8 WATTSA cold cathode lamp replacing an incandescent lamp using at least 10 watts.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Is the cold cathode lamp replacing, one or one, an incandescent lamp o at least 10 watts?
Does the cold cathode lamp range rom 2 watts to 8 watts?Is the cold cathode lamp a medium (Edison) or candelabra base?Is the cold cathode lamp rated or at least 18,000 average lie hours?
A cold cathode is an element used within some nixie tubes, gas discharge lamps, dischargetubes, and vacuum tubes. The term cold cathode reers to the act that the cathode is notindependently heated.
SOLUTION
CODESOLUTION DESCRIPTION FOR C OLD CATHODE
INCENTIVE
$/unit o measure
LT-45910 Cold cathode fuorescent lamp: 28 watts $4.00 / lamp
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
Note: Solution codes or 16 or 30 watt cold cathode fuorescent lamps have expired.
-
7/30/2019 SCE - Express Solutions
24/90
Energy EfciencyIncentives
22
Controls and sensors that have the ability to automatically turn o electrical systems when aspace is not in use.
LIGHTING
CONTROLS
WALL-BOX LIGHTING SENSORSLights are turned on and o based on detec tion o motion by occupancy sensors replacing standard wall light switches.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are hardwired PIR and/or ultrasonic detectors being installed to control interior lighting xtures?
Are the units designed to replace a standard wall switch, without an exterior switch pack or relay? Only one sensor per circuit isallowed. (Multiple switches controlling the same xtures can only receive one sensor incentive.)
Will programmed rapid-start ballasts be used when occupancy sensors are installed to control fuorescent lamps? (This is generallyrecommended; however, it is not required.)
Will the proper lamps and ballasts be used or the retrot? Customers shall ensure that the appropriate lamps and ballast are in useor the installation.
Note: Hotel or Motel guest rooms or any other living space types do not qualiy or the sensor incentives oer below. It is thecustomers responsibility to ensure that the sensors are installed and operating properly.
WALL- OR CEILING-MOUNTED LIGHTING SENSORSLights are turned on and o based on detec tion o motion by occupancy sensors.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are hardwired PIR and/or ultrasonic detectors being installed to control interior lighting xtures?
Do sensors meet the wat tage-controlled requirements listed in the incentive table below?
Will programmed rapid-start ballasts be used when occupancy sensors are installed to control fuorescent lamps? (This is generally
recommended; however, it is not required.)
Will the proper lamps and ballasts be used or the retrot? Customers shall ensure that the appropriate lamps and ballast are in useor the installation.
Note: It is the customers responsibility to ensure that the sensors are installed and operating properly.
SOLUTION
CODESOLUTION DESCRIPTION FOR LIGHTING CONTROLS
INCENTIVE
$/unit o measure
LT- 58 20 9 Wall -box light ing sensor $ 20 .0 0 / sensor
SOLUTION
CODESOLUTION DESCRIPTION FOR LIGHTING CONTROLS
INCENTIVE
$/unit o measure
LT-98724 Wall- or ceiling-mounted lighting sensor < 500 watts controlled $35.00 / sensor
LT-38102 Wall- or ceiling-mounted lighting sensor > 500 watts controlled $55.00 / sensor
Express Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
-
7/30/2019 SCE - Express Solutions
25/9023
INTEGRATED SENSORSLights are turned on and o based on detec tion o motion by occupancy sensors mounted on each lighting xture.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Are hardwired PIR and/or ultrasonic detectors being installed to control interior lighting xtures?
I planning to install xture-integrated sensors, are the units actory-installed in a lighting xture, used in interior installations, andcontrol all lamps in the xture?
Do sensors meet the wat tage-controlled requirements listed in the incentive table below?
Will programmed rapid-start ballasts be used when occupancy sensors are installed to control fuorescent lamps? (This is generallyrecommended; however, it is not required.)
Will the proper lamps and ballasts be used or the retrot? Customers shall ensure that the appropriate lamps and ballast are in useor the installation.
Note: It is the customers responsibility to ensure that the sensors are installed and operating properly.
SOLUTION
CODESOLUTION DESCRIPTION FOR LIGHTING CONTROLS
INCENTIVE
$/unit o measure
LT-41007 Integrated sensor: < 150 watts $15.00 / sensor
LT-76101 Integrated sensor: > 150 watts $40.00 / sensor
SOLUTION
CODESOLUTION DESCRIPTION FOR LIGHTING CONTROLS
INCENTIVE
$/kWh $/kW1
LT-50567 Lighting controlsenergy management system (EMS) $0.05 $100
LT-43077 Lighting controlsoccupancy sensors $0.05 $100
LT-90853 Day lighting controlsEMS $0.05 $100
LT-74751 Day lighting systems with dimmable ballast $0.05 $100
LT-94134 Other lighting controls $0.05 $100
LT-32843 Dimming Ballasts20% Tuning $0.05 $100
LT-48272* NEW Dimming Ballasts20% Tuning + Auto Demand Response $0.05 $100
LT-57958 Dimming Ballasts20% Tuning + Occupancy Sensor $0.05 $100
LT-60897* NEW Dimming Ballasts20% Tuning + Occupancy Sensor + Auto Demand Response $0.05 $100
LT-36502 NEW Dimming Ballasts20% Tuning + Daylight Harvesting $0.05 $100
LT-49584* NEW Dimming Ballasts20% Tuning + Daylight Harvesting + Auto Demand Response $0.05 $100
LT-78223 Dimming Ballasts20% Tuning + Occupancy Sensor + Daylight Harvesting with Side Lighting Photo Controls $0.05 $100
LT-89432* NEWDimming Ballasts20% Tuning + Occupancy Sensor + Daylight Harvesting with Side Lighting Photo Controls+ Auto Demand Response
$0.05 $100
Customized Solution
lightingcontrols, continued
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
* To be eligible or incentives, these solutions must be used with their corresponding Demand Response solutions ound on page 73.
-
7/30/2019 SCE - Express Solutions
26/90
Energy EfciencyIncentives
24
lightingcontrols, continued
SOLUTION
CODESOLUTION DESCRIPTION FOR LIGHTING CONTROLS
INCENTIVE
$/unit o measure
LT-74831* NEW Aisle trafc sensor or reach-in rerigerated case doors $7.00 / door
Express Solution
AISLE TRAFFIC SENSOR FOR REACH-IN REFRIGERATED CASE DOORSLights are turned on and o based on detection o motion by occupancy sensors installed on reach-in rerigerated cases.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
I you answer No to any question in the Express Solution section, consider a Customized Solution.
Are hardwired PIR and/or ultrasonic detectors being installed to control vertically-mounted LED lighting xtures in reach-in rerigerateddisplay cases? This incentive is paid on a per door basis.
Will the light levels dim down to an established low-power mode (less than 25% o ull power consumption) in less than 2 minutes whenno trac is sensed in the aisles?
Are the sensors installed in any o the ollowing building types: Grocery, Food Store, or Retail with reach-in rerigerated display cases?
Note: It is the customers responsibility to ensure that the sensors are installed and operating properly.
Indicates new technology category
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
1. kW incentive applies. Reer to the Appendix: Eligibility requirements or incentive qualifcations and detailed calculations.
SOLUTION
CODESOLUTION DESCRIPTION FOR LIGHTING CONTROLS
INCENTIVE
$/kWh $/kW1
LT-90192 Lighting controlsaisle trac sensor or rerigerated display cases $0.05 $100
Customized Solution
* To be eligible or incentives, these solutions must be used with their corresponding Demand Response solutions ound on page 71.
-
7/30/2019 SCE - Express Solutions
27/9025
New energy-ecient cooking and cooking process equipment.
For a list o qualiying Food Service products, visit www.shnick.com/saveenergy/rebates .
All incentives apply toward the purchase onew or replacement energy-ecient equipment,unless otherwise specied
Used or rebuilt equipment is not eligible Customers must provide proo that the appliances meet the specic energy-eciency
specications below
COOKING
EQUIPMENT
COMMERCIAL KITCHEN VENTILATION CONTROL RETROFIT OR NEW HOODA new control system installed in an existing or new commercial kitchen exhaust hood and make-up air system, in conjunction with variable-
speed an controls. Incent ives are based on the MAU an motor horsepower.
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Is a new commercial kitchen exhaust hood control system being installed in an existing or new dedicated commercial kitchenexhaust hood and MAU? Indicate MAU hp on invoice. The incentive is based on MAU hp.
Will the control system be used in conjunction with variable-speed an motor controls? VSDs must be installed on both the exhaustand the MAU ans.
Is the system on the Food Service Technology Center pre-approved list? Only pre-approved control systems qualiy or an incentive.Reer to http://www.shnick.com/saveenergy/rebates/to determine i the control system qualies.
Application process: Project Installation Worksheet must be submitted with the Application. Worksheet available atwww.fshnick.com/saveenergy/rebates/
FOOD SERVICE
COMMERCIAL ELECTRIC GRIDDLES
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Are the commercial electric griddles on the Food Service Technology Centers pre-approved list?http://shnick.com/saveenergy/rebates/griddles.pd
SOLUTION
CODESOLUTION DESCRIPTION FOR COOKING EQUIPMENT
INCENTIVE
$/unit o measure
Commercial electric:
FS-61445 Griddle $300.00 / griddle
SOLUTION
CODESOLUTION DESCRIPTION FOR COOKING EQUIPMENT
INCENTIVE
$/unit o measure
Commercial kitchen ventilation control:
FS-17337 Retrot hood $350.00 / hp
FS-23401 New hood $300.00 / hp
Express Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
Indicates updated qualiying criteria
http://www.fishnick.com/saveenergy/rebates/http://www.fishnick.com/saveenergy/rebates/http://www.fishnick.com/saveenergy/rebates/http://www.fishnick.com/saveenergy/rebates/ -
7/30/2019 SCE - Express Solutions
28/90
Energy EfciencyIncentives
26
cookingequipment, continued
COMMERCIAL ELECTRIC COMBINATION OVENS
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Does the combination oven have a tested steam mode cooking energy eciency o greater than or equal to 50% and convectionmode cooking energy eciency o greater than or equal to 70% utilizing ASTM Standard F2861, and meet the idle raterequirements in Table 1 below?
COMMERCIAL ELECTRIC CONVECTION OVENS
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Are the commercial electric convection ovens on the Food Service Technology Center pre-approved list? http://shnick.com/saveenergy/rebates/ovens.pd
SOLUTION
CODESOLUTION DESCRIPTION FOR COOKING EQUIPMENT
INCENTIVE
$/unit o measure
Commercial electric:
FS-72300 Convection oven $350.00 / unit
SOLUTION
CODESOLUTION DESCRIPTION FOR COOKING EQUIPMENT
INCENTIVE
$/unit o measure
Commercial electric:
FS-88004 Combination oven $1,000.00 / unit
Express Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
TABLE 1. ASTM F2861 IDLE RATE REQUIREMENTS FOR COMMERCIAL COMBINATION OVEN/STEAMERS
Combi Oven Type Steam Mode Idle Rate Convection Mode Idle Rate
Electric Combi < 15 pan capacity* < 5.0kW < 2.0kW
Electric Combi 15-28 pan capacity* < 6.0kW < 2.5kW
Electric Combi > 28 pan capacity* < 9.0kW < 3.5kW
*Combination oven/steamer pan capacity on based on the maximum capacity o standard 2 -inch deep hotel pans.
This must be consistent with the number o pans used to meet the ener gy-eciency qualications per ASTM F 2861.
Indicates updated qualiying criteria
-
7/30/2019 SCE - Express Solutions
29/9027
cookingequipment, continued
COMMERCIAL LARGE VAT ELECTRIC FRYERS
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Qualiying electric large vat ryer models must have a tested heavy-load (French ry) cooking energy eciency o 80% utilizingASTM Standard F2144.
Are the commercial electric large vat ryers on the Food Service Technology Center pre-approved list?http://shnick.com/saveenergy/rebates/lvryers.pd
Note: Multiple vat confgurations are paid per qualiying vat.
SOLUTION
CODESOLUTION DESCRIPTION FOR COOKING EQUIPMENT
INCENTIVE
$/unit o measure
Commercial electric:
FS-49213 Large vat ryer $200.00 / vat
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
COMMERCIAL ELECTRIC FRYERS
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Qualiying electric ryer models must have a tested heavy load cooking energy eciency 80% and idle energy rate 1.0 kWutilizing ASTM Standard F1361.
Are the commercial electric ryers on the Food Service Technology Center pre-approved list?http://shnick.com/saveenergy/rebates/ryers.pd
Note: Multiple vat confgurations are paid per qualiying vat.
SOLUTION
CODESOLUTION DESCRIPTION FOR COOKING EQUIPMENT
INCENTIVE
$/unit o measure
Commercial electric:
FS-57892 Fryer $200.00 / vat
Express Solution
Indicates updated qualiying criteria
-
7/30/2019 SCE - Express Solutions
30/90
Energy EfciencyIncentives
28
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Is the equipment an electric hot ood holding cabinet that is ully insulated on all sides and has solid or transparent doorsdesigned to maintain the temperature o the hot ood that has been cooked using a separate appliance?
Are holding cabinets on the Food Service Technology Center pre-approved list?http://shnick.com/saveenergy/rebates/holding_cabinets.pd
Note: Cook and hold equipment does not qualiy.
SOLUTION
CODESOLUTION DESCRIPTION FOR HOLDING CABINETS
INCENTIVE
$/unit o measure
Insulated:
FS-20224 Full size $300.00 / unit
FS-93639 Three-quarter size $250.00 / unit
FS-31559 Hal size $200.00 / unit
cookingequipment, continued
SOLUTION
CODE
SOLUTION DESCRIPTION FOR COOKING EQUIPMENTINCENTIVE
$/unit o measure
Commercial electric:
FS-38502 Steam cooker $1,250.00 / steamer
COMMERCIAL ELECTRIC STEAM COOKER
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Are the commercial electric steam cookers on the Food Service Technology Center pre-approved list?http://shnick.com/saveenergy/rebates/steam_cookers.pd
Express Solution
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
An electric ood holding cabinet that is ully insulated on all sides and has solidinsulated doors.
HOLDINGCABINETS
Indicates updated qualiying criteria
-
7/30/2019 SCE - Express Solutions
31/9029
Express Solution Qualifying Questions
YES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Ice makers must be on the Food Service Technology Center pre-approved list.www.shnick.com/saveenergy/rebates/icemakers.pd
Do the commercial ice machines generate 60 grams (2 oz) or lighter ice cubes? Ice makers which fake, crush, or ragment
are also included.
Is the machine air-cooled (sel-contained, ice-making heads, or remote-condensing)?Will the entire AHRI-tested ice-making system be purchased?
I proposed equipment is a remote machine, will the qualiying compressor unit be purchased with the remote machine?
Note: The efciency specifcations or the two qualiying tiers are equivalent to ENERGY STAR or CEE Tier III.
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
TABLE 4. ENERGY-EFFICIENT ICE MAKER ENERGY EFFICIENCY REQUIREMENTS
Equipment TypeIce Harvest Rate
(lbs ice/day)
Energy Use Limit
(kWh/100 lbs ice)
Potable Water Use Limit
(gal/100 lbs ice)
Ice Maker Head (IMH)< 450 9.23 0.0077 Ha < 25
> 450 6.20 0.0010 Ha < 25
Remote Condensing Unit (RCU)without remote compressor
< 1,000 8.05 0.0035 Ha < 25> 1,000 4.64 < 25
Remote Condensing Unit (RCU)with remote compressor
< 934 8.05 0.0035 Ha < 25
> 934 4.82 < 25
Sel Contained Unit(SCU)
< 175 16.7 0.0436 Ha < 25
> 175 9.11 < 25
TABLE 5. SUPER-EFFICIENT ICE MAKER ENERGY EFFICIENCY REQUIREMENTS
Equipment TypeIce Harvest Rate
(lbs ice/day)
Energy Use Limit
(kWh/100 lbs ice)
Potable Water Use Limit
(gal/100 lbs ice)
Ice Maker Head (IMH)< 450 8.72 0.0073 Ha < 20
> 450 5.86 0.0009 Ha < 20
Remote Condensing Unit (RCU)without remote compressor
< 1,000 7.52 0.0032 Ha < 20
> 1,000 4.34 < 20
Remote Condensing Unit (RCU)with remote compressor
< 934 7.52 0.0032 Ha < 20
> 934 4.51 < 20
Sel Contained Unit(SCU)
< 175 15.3 0.0399 Ha < 30
> 175 8.33 < 30
An air-cooled ice machine that makes cubed (less than or equal to 60 grams), faked, crushed,or ragmented ice.
Note: Commerical ice machines must be tested in accordance with the Air-Conditioning and Refgeration
Institute (ARI) Standard 810. Visitwww.ari.orgor product inormation and testing procedures.
COMMERCIAL
ICE MACHINES
Indicates updated qualiying criteria
-
7/30/2019 SCE - Express Solutions
32/90
Energy EfciencyIncentives
30
SOLUTION
CODESOLUTION DESCRIPTION FOR COMMERCIAL ICE MACHINES
INCENTIVE
$/unit o measure
Air-cooled:
FS-47481 101200 lbs per day, Energy Ecient $50.00 / unit
FS-11418 201300 lbs per day, Energy Ecient $50.00 / unit
FS-83031 301400 lbs per day, Energy Ecient $75.00 / unit
FS-63559 401500 lbs per day, Energy Ecient $75.00 / unit
FS-94466 5011,000 lbs per day, Energy Ecient $125.00 / unitFS-58123 1,0011,500 lbs per day, Energy Ecient $200.00 / unit
FS-26777 > 1,500 lbs per day, Energy Ecient $250.00 / unit
FS-38811 101200 lbs per day, Super Ecient $100.00 / unit
FS-18874 201300 lbs per day, Super Ecient $100.00 / unit
FS-46691 301400 lbs per day, Super Ecient $150.00 / unit
FS-76523 401500 lbs per day, Super Ecient $150.00 / unit
FS-64114 5011,000 lbs per day, Super Ecient $250.00 / unit
FS-52221 1,0011,500 lbs per day, Super Ecient $400.00 / unit
FS-80045 > 1,500 lbs per day, Super Ecient $500.00 / unit
Express Solution
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
commercialicemachines, continued
-
7/30/2019 SCE - Express Solutions
33/9031
For complete terms and conditions, go to www.sce.com/solutions. Please reer to the Whats New section o the Online Application (www.sceonlineapp.com)
or additions, deletions and other changes to solutions and eligibility requirements since the publication date o this document (print or online).
Commercial Solid-door/Glass-door Rerigerators and Freezers
PRODUCT
DESCRIPTION
DAILY ENERGY USE
0 < V < 15 cu t
Total volume
15 < V < 30 cu t
Total volume
30 < V < 50 cu t
Total volume
50 < V cu t
Total volumeSolid-door rerigerators < 0.089 V + 1.411 kWh/day < 0.037 V + 2.200 kWh/day < 0.056 V + 1.635 kWh/day < 0.060 V + 1.416 kWh/day
Solid-door reezers < 0.250 V + 1.250 kWh/day < 0.400 V - 1.000 kWh/day < 0.163 V + 6.125 kWh/day < 0.158 V + 6.333 kWh/day
Glass-door rerigerators < 0.118 V + 1.382 kWh/day < 0.140 V + 1.050 kWh/day < 0.088 V + 2.625 kWh/day < 0.110 V + 1.500 kWh/day
Glass-door reezers < 0.607 V + 0.893 kWh/day < 0.733 V - 1.000 kWh/day < 0.250 V + 13.500 kWh/day < 0.450 V + 3.500 kWh/day
V = Internal volume in cubic eet (cu t)
Express Solution Qualifying QuestionsYES The answer should be Yes to every applicable question in a solution category or a project to qualiy or that incentive.
Are the commercial rerigerators and/or reezers on the Food Service Technology Center pre-approved list?http://shnick.com/saveenergy/rebates/
Is the rerigeration system packaged?
Exclusions:
Cases with remote rerigeration systems do not qualiy ENERGY STAR Version 1.0 rerigerators and reezers do not qualiy or incentive
For a list o qualiying Food Service products, visit www.shnick.com/saveenergy/rebates . All incentives apply toward the purchase o new or replacement energy-ecient equipment,
unless otherwise specied Used or rebuilt equipment is not eligible Customers must provide proo that the appliances meet the energy-eciency
specications below
A reach-in rerigerated space consisting o panels made with inner and outer metal skins, aninsulation core, and equipped with a cam-action closing device.
COMMERCIAL
REACH-INREFRIGERATORS
OR FREEZERS
Indicates updated qualiying criteria
http://www.fi