Download - Scada and power system automation
![Page 1: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/1.jpg)
SCADA AND POWER SYSTEM AUTOMATION
-Presented byShubham Kapoor3rd Year (6th SEMESTER)Electrical and Electronics Engineering Roll No. 1274521010
![Page 2: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/2.jpg)
OutlineSCADAS What is SCADA??S History of ScadaS Common Components of ScadaS System Components of ScadaS Future trends in Scada
-continue
![Page 3: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/3.jpg)
Power system automationS Electrical power systemS What is power system automationS Automation tasksS IEDsS Automation processS Advantages S DisadvantagesS ApplicationsS Conclusion
![Page 4: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/4.jpg)
Scada
SupervisoryControl AndDataAcquisition
![Page 5: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/5.jpg)
What is Scada??According to WikipediaScada is ” SCADA is a system operating with coded signals over communication channels so as to provide control of remote equipment (using typically one communication channel per remote station).”
![Page 6: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/6.jpg)
EXAMPLE OF SCADA
![Page 7: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/7.jpg)
History of SCADA
1940 1950 1960 1965 1970
Electric utility
systems
Telemetry and control
Development
General Electric and Control Corporation
Solid state devices were
developed
Advanced Telemetry
![Page 8: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/8.jpg)
Main Functions of SCADA
Data Acquisition
Networked Data
Communication
Data Presentation Control
![Page 9: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/9.jpg)
Common system components
• Remote Terminal Unit(RTU)• Programmable logic Controller(PLC)• Telemetry system• Human machine interface• Data Acquisition Server• A supervisory (computer) system, gathering
(acquiring) data on the process and sending commands (control) to the SCADA system.
• Communication infrastructure connecting the supervisory system to the remote terminal units.
• Various process and analytical instrumentation.
![Page 10: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/10.jpg)
Remote Terminal Unit
• Remote • Terminal• Unit
![Page 11: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/11.jpg)
RTUA remote terminal unit (RTU) is a microprocessor-controlled electronic device that interfaces objects in the physical world to a distributed control system or SCADA (supervisory control and data acquisition) system by transmitting telemetry data to a master system, and by using messages from the master supervisory system to control connected objects. Another term that may be used for RTU is remote telecontrol unit.
![Page 12: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/12.jpg)
Two basic types of RTU:
1.Single board RTU
2.Modular RTU
![Page 13: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/13.jpg)
Single board RTU Which is compact, and contains all
I/O on a single board. The single board RTU normally has fixed I/O (eg.16 digital inputs, 8 digital outputs, 8 analogue inputs, and say 4 analogue outputs).
![Page 14: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/14.jpg)
Modular RTU
which has a separate CPU module, and can have other modules added, normally by plugging into a common "backplane" (a bit like a PC motherboard and plug in peripheral cards) is designed to be expanded by adding additional modules.
![Page 15: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/15.jpg)
Architecture • Power supply• Digital or Status inputs• Analog inputs• Digital (control) outputs• Analog outputs• Software and logic control• Communications
IED communications Master communications
![Page 16: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/16.jpg)
Programmable logic Controller
(PLC)A programmable logic controller, PLC or programmable controller is a digital computer used for automation of typically industrial electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many industries and machines.
![Page 17: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/17.jpg)
Human Machine Interface
• Human Machine Interface commonly known as HMI are deployed for control and visualization interface between a human and a process, machine, application and appliance. Increasingly, HMIs are becoming an integral part of Factory Automation.
![Page 18: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/18.jpg)
Data Acquisition Server
• Network
![Page 19: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/19.jpg)
Communication and software
Communication and software
S The SCADA consist of Hardware and Software components.
S The hardware collects and feed data into a computer with SCADA software installed.
S The data is then processed by the computer before presenting it in a timely manner.
![Page 20: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/20.jpg)
DatabaseA structured set of data is held in a computer for the future reference
![Page 21: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/21.jpg)
SCADA SYSTEMRTU(remote terminal unit)
PLC
Data Acquisition
Server
User interface (HMI)
CommunicationsEquipment and software
![Page 22: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/22.jpg)
System Concept of SCADA
![Page 23: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/23.jpg)
FUTURE TRENDS IN SCADA
FUTURE
![Page 24: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/24.jpg)
FUTURE TRENDS IN SCADA
First generation: "Monolithic“
Second generation: "Distributed“
Third generation: "Networked"
![Page 25: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/25.jpg)
First generation: "Monolithic"
• In the first generation, computing was done by mainframe computers.
• Networks did not exist at the time SCADA was developed.
• Thus SCADA systems were independent systems with no connectivity to other systems. Wide Area Networks were later designed by RTU vendors to communicate with the RTU.
• The first-generation SCADA system was redundant since a back-up mainframe system was connected at the bus level and was used in the event of failure of the primary mainframe system.
FUTURE TRENDS IN SCADA
![Page 26: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/26.jpg)
Second generation: "Distributed"
The processing was distributed across multiple stations which were connected through a LAN and they shared information in real time.
Each station was responsible for a particular task thus making the size and cost of each station less than the one used in First Generation.
FUTURE TRENDS IN SCADA
![Page 27: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/27.jpg)
Third generation: "Networked"
Due to the usage of standard protocols and the fact that many networked SCADA systems are accessible from the Internet, the systems are potentially vulnerable to remote attack.
FUTURE TRENDS IN SCADA
![Page 28: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/28.jpg)
POWER SYSTEM AUTOMATION
![Page 29: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/29.jpg)
Electrical Power System
![Page 30: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/30.jpg)
What is power system
automation??Power-system automation is the act of automatically controlling the power system via instrumentation and control devices. Substation automation refers to using data from Intelligent electronic devices (IED), control and automation capabilities within the substation, and control commands from remote users to control power-system devices.
![Page 31: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/31.jpg)
Automation Tasks..
• Data acquisition• Power System Supervision• Power System Control• Power System Automation• I&C System IEDs
![Page 32: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/32.jpg)
Intelligent Electronic Device
Any device incorporating one or more processors with the capability to receive or send data/control from or to an external source (e.g., electronic multifunction meters, digital relays, controllers)
![Page 33: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/33.jpg)
Instrument Transformers
Instrument transformers are used to sense power system current and voltage values. They are physically connected to power system apparatus and convert the actual power system signals, which include high voltage and current magnitudes, down to lower signal levels
![Page 34: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/34.jpg)
TransducerTransducers convert the analog output of an instrument transformer from one magnitude to another or from one value type to another, such as from an ac current to dc voltage.
![Page 35: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/35.jpg)
Remote Terminal Unit, RTU
![Page 36: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/36.jpg)
Communications Port Switch
A communications switch is a device that switches between several serial ports when it is told to do so. The remote user initiates communications with the port switch via a connection to the substation, typically a leased line or dial-up telephone connection. Once connected, the user can route their communications through the port switch to one of the connected substation IEDs. The port switch merely “passes through” the IED communications.
![Page 37: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/37.jpg)
MeterA meter is an IED that is used to create accurate measurements of power system current, voltage, and power values. Metering values such as demand and peak are saved within the meter to create historical information about the activity of the power system
![Page 38: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/38.jpg)
Digital Fault Recorder
A digital fault recorder (DFR), is an IED that records information about power system disturbances.It is capable of storing data in a digital format when triggered by conditions detected on the power system. Harmonics, frequency, and voltage are examples of data captured by DFRs.
![Page 39: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/39.jpg)
Load Tap Changer (LTC)
Load tap changers are devices used to change the tap position on transformers. These devices work automatically or can be controlled via another local IED or from a remote operator or process.
![Page 40: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/40.jpg)
Re closer Controller
Re closer controllers remotely control the operation of automated re closers and switches. These devices monitor and store power system conditions and determine when to perform control actions. They also accept commands from a remote operator or process.
![Page 41: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/41.jpg)
Time Synchronization Source
A time synchronization source is an IED that creates a time-of-day value which is then broadcastto the IEDs in order to set all their clocks to the same time.Protocol
GatewayIEDs communicate over serial connections by speaking a particular language or protocol. A protocol gateway converts communications from one protocol to another. This task is often performed by software on a personal computer.
![Page 42: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/42.jpg)
HMI PLC&
![Page 43: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/43.jpg)
Protective Relay
A protective relay is an IED designed to sense power system disturbances and automatically perform control actions on the I&C system and the power system to protect personnel and equipment.
SEL-351 Relay
![Page 44: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/44.jpg)
Communications Processor
A communications processor is a substation controller that incorporates the functions of many other I&C devices into one IED. SEL-2030 Communications Processor
![Page 45: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/45.jpg)
Automation Process
![Page 46: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/46.jpg)
![Page 47: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/47.jpg)
Advantages Flexible simple reliableEfficient
with less manpowe
r
Portable and cost
efficientSelf-
checking and
readability
![Page 48: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/48.jpg)
DisadvantagesTroubled alarms
Lack of trained personals
Initial capital investments
![Page 49: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/49.jpg)
Applications
![Page 50: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/50.jpg)
Smart gridA smart grid is a modernized electrical grid that uses analogue or digital information and communications technology to gather and act on information, such as information about the behaviours of suppliers and consumers, in an automated fashion to improve the efficiency, reliability, economics, and sustainability of the production and distribution of electricity. Electronic power conditioning and control of the production and distribution of electricity are important aspects of the smart grid.
![Page 51: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/51.jpg)
Smart meterA smart meter is usually an electronic device that records consumption of electric energy in intervals of an hour or less and communicates that information at least daily back to the utility for monitoring and billing.
![Page 52: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/52.jpg)
Automatic generation control
• In an electric power system, automatic generation control (AGC) is a system for adjusting the power output of multiple generators at different power plants, in response to changes in the load.
![Page 53: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/53.jpg)
Conclusion
The government of India has decided to integrate all the state power utilities. Unified load dispatch Centre has to be build. So automation has lot more advantages as it increases efficiency and increase standardization. India is moving ahead toward automation are you??
![Page 54: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/54.jpg)
ANY QUERIES ???
![Page 55: Scada and power system automation](https://reader036.vdocuments.us/reader036/viewer/2022081503/58f9addb760da3da068b9c9f/html5/thumbnails/55.jpg)