Download - Rework template
Transcript
Ariston ReworkSummary of Procedures:• Change Gas Jets (Fig 1) See over for sizes. • Adjust Low Flame setting (Fig 2)• Place stickers on back of unit/owner’s manual (Fig 3)• Fit 10 amp mains plug and pack as shown (Fig 4)• Pack regulator and nipple, make sure of no movement (Fig 5)• Place stickers on outside of box and seal (Fig 6)• Put warranty card in with owners manual
Gas Cooktop
Figure 1
Figure 3
Figure 2
Figure 4
Figure 6
Figure 5
Turn each screw
as per the arrow.
3/4 of a revolution
PTO