REVISION HISTORY
REV DESCRIPTION DATE APPROVED
TITLE
SIZE CustomerDWG NO
REV
SCALE SHEET
Finish #4 B
Estate Elite BI with Insulated Jacket Clearances
- Engineering Release 03/20/2018 Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8P: (519) 751-1800 www.crownverity.com
1:10 1 of 3
--Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY: Todd StoneMaterial SS 304 03/20/2018
Dimensions are in inchesLinear Tolerance: +/- .015Bend Tolerance: +/- .020Angular Tolerance: +/- 0.5Radial Tolerance: +/-.005
Copyright 2018 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
39.421EE36 Shown
For EE24 Dimension is 27.421For EE30 Dimension is 33.421For EE48 Dimension is 52.821
13.827
19.391
24.165
Dimensions shown are actual dimensions. Please refer to theinstallation manual for additional clearances and clearances
to combustibles
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
TITLE
SIZE CustomerDWG NO
REV
SCALE SHEET
Finish #4 B
Estate Elite BI with Insulated Jacket Clearances
- Engineering Release 03/20/2018 Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8P: (519) 751-1800 www.crownverity.com
1:10 2 of 3
--Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY: Todd StoneMaterial SS 304 03/20/2018
Dimensions are in inchesLinear Tolerance: +/- .015Bend Tolerance: +/- .020Angular Tolerance: +/- 0.5Radial Tolerance: +/-.005
Copyright 2018 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
25.052
.449
Dimensions shown are actual dimensions. Please refer to theinstallation manual for additional clearances and clearances
to combustibles
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
TITLE
SIZE CustomerDWG NO
REV
SCALE SHEET
Finish #4 B
Estate Elite BI with Insulated Jacket Clearances
- Engineering Release 03/20/2018 Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8P: (519) 751-1800 www.crownverity.com
1:5 3 of 3
--Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY: Todd StoneMaterial SS 304 03/20/2018
Dimensions are in inchesLinear Tolerance: +/- .015Bend Tolerance: +/- .020Angular Tolerance: +/- 0.5Radial Tolerance: +/-.005
Copyright 2018 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
This dimension is the furthest point the dome protrudes back as it opens. It is 1.666 inches further back than the rear flange of the cabinetshell. Please refer to the installation manual
for clearances to combustibles when installing the grill assembly.
Up 9
0.0
00°
R:0
.015
38.737EE36 Shown
For EE24 Dimension is 26.737For EE30 Dimension is 32.737For EE48 Dimension is 52.137
6.944REF
2.241
2.240
3.166
1.666
6.944
12.937
.461
23.752
1.871+/- .250 Inches
The dimensions shown are the actual physical dimensions of the grill. Additional clearances to cabinetry are dependent on the tolerances of the cut-out. We recommend an additional .125 inches per side but the opening can be made smaller if the tolerances are controlled.
Please refer to the installation manual for additional clearances to combustibles.
If the EE48 is installed with dual 20 or 30 lbs tanks, a second manifold will be
installed on the LH side of the grill. A second manifold is not
required for bulk LP or NG installations.