Download - Restrained Products - EvoGrip Couplings
Restrained Products - EvoGrip Couplings
WWW.KLINGER.CO.ZA
[email protected] TEL: +27 11 794 7594
CAPE TOWN TEL: +27 21 511 1337
EvoGrip
For cost effective fully restrained connections of HDPE pipe
Application
Simple InstallationThe EvoGrip is extremely simple to install. With the use of 2 spanners the coupling is simply positioned and tightened. The self-energizing pressure seal ensures a leak proof joint. The gripping mechanism ensures axial restraint.
ApplicationEvoGrip Couplings are designed to provide fully restrained joints for HDPE pipework. The coupling is suitable up to and including a working pressure of 16 bar (1600 kPa).
Cost EffectiveThe EvoGrip is: - light weight - cost effective - extremely simple and easy to install with the use of 2 spanners.
The EvoGrip can be used on site eliminating the need and costs of Butt Welding machines for the connection of HDPE. Bulky and expensive TAK Clamps can be replaced with the EvoGrip. The EvoGrip also Replaces Stub & Flange connections for HDPE pipe.
Corrosion ResistantThe EvoGrip is manufactured from corrosion resistant materials that require no corrosion protection coatings or after installation petrolatum tapes such as Denso Tape.
Size Range
- DN110mm - DN160mm
Industries
- Water
Pipe Materials
- HDPE
www.thomaspipeproducts.comB2
EvoGrip
Bolts6 x M12 x 65mm Set Screws are supplied as fasteners for each product. The bolts are available in Hot Dipped Galvanized, Stainless Steel Grade 304 or Stainless Steel Grade 316.
Ultra Violet StabilizersThe EvoGrip moulding is produced by a direct injection moulding process, Ultra Violet (UV) stabilizers are introduced into the Nylon in order to provide resistance to Ultra Violet degradation when exposed to direct sunlight.
Material Specification
Bolts, Nuts & WashersSteel to SANS1143 Grade 8.8Stainless Steel available on request
Bolts, Nuts & Washers CoatingElectro-galvanized Zinc to BS EN 12329 / 12330
CasingMoulded Fibreglass Reinforced Nylon 66With Ultra Violet Stabilizers
Rubber SealEPDM SANS974 Related ISO4633Other rubber compounds such as Nitrile (NBR) and Viton are available on request
Grip RingAluminium Alloy 6063 T4
Specifications & Dimensions
PIPE O.D. PRODUCT D L W BOLTS WORKING TEST
CODE PRESSURE PRESSURE
mm mm mm mm Bar Bar
110 TEVOC0110 146 150 178 6 x M12 x 65 16 24
160 TEVOC0160 186 220 226 6 x M12 x 65 16 24
WWW.KLINGER.CO.ZA
[email protected] TEL: +27 11 794 7594
CAPE TOWN TEL: +27 21 511 1337
Every effort has been made to ensure that the information contained in this document is accurate at the time of publishing. KLINGER Pipe Products assumes no responsibility or liability for typographical errors or omissions for any misinterpretation of the information within the document and reserves the right to change without notice.
D9