Download - Reparacion Del Sensor de Parking
-
8/9/2019 Reparacion Del Sensor de Parking
1/20
Parking sensor
CISBO
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
2/20
Index
TO USER --------------------------------------------------------------1
PART AND TECH DATA---------------------------------------------2
DISPLAY AND ALARM SOUND-----------------------------------3
INSTALLATION FOR 2&4 SENSORS-----------------------------4
INSTALLATION FOR 6&8 SENSORS-----------------------------5
INSTALLATION FOR WIRELESS TYPE--------------------------6
INSTALLATION FOR VIDEO TYPE-------------------------------7
INSTALLATION FOR REARVIEW MIRROR TYPE-------------8
POSITION FOR EACH PART------------------------- --------------9
DISPLAY & MAIN BOX INSTALLATION DIAGRAM----------10
SENSORS INSTALLATION DIAGRAM--------------------------11
NOTICE FOR USER-------------------------------------------------12
FUNCTIONS FOR LED DISPLAY SERIES-----------------------13
FUNCTIONS FOR LCD DISPLAY SERIES-----------------------14
FUNCTIONS FOR REARVIEW MIRROR SERIES---- ----------15
FUNCTIONS FOR VIDEO DISPLAY SERIES--------------------16
GUARANTEE FORM -----------------------------------------------17
-
8/9/2019 Reparacion Del Sensor de Parking
3/20
TO USERThank you for choosing and using our Parking Sensor products. We
are going to provide you with the best products and the best services. Inorder to insure the best performance and avoid any false alarm orfunction failure, we strongly suggest that you read this user's manualcarefully before installation and use. Parking Sensor System is a high technology product. It adoptsultrasonic wave sensors to measure the distance between your car and
the obstacles, and remind the driver of safe distance accurately whenreversing a car. We reserve all rights for our Parking Sensor products, including thedesigns and the software. Any unauthorized copy or translation isprohibited. And the content of the user's manual will be updatedaccording to the update of the products, if it is subjected to change,
without notification. At last, the final explanation rights of this user'smanual is reserved by us.
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
4/20
2
PART
1.
2.
3.
4.Camera: input the video signal, normally be set in the rear bumper. 5.
Display: Back vision display, distance numeric display, buzzer alarm circuit , etc ,normally set inside the driving room.
Control unit : MCU control circuit, normally set inside the trunk, nearby the backup l ights.
Sensor: .Ultrasonic sensor "electronic eye", is the transmisson center for detectingsignals and normally set at the rear or front of bumper.
Mobile phone hands free system: Be set inside the rear view mirror, connected withthe mobile, bring convenience and safety during circumstance.
TECH DATA
1.2.3.
4.5.6. Radio frequency: 315MHz/433MHz7. Camera angle: 92 or 120
Rated voltage : DC12V (24v available) Power : 3.6WWorking temperature: -20 C---70 C
Detecting distance: 0.3-2.0M Detecting angle: H>60 ,V>60
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
5/203
DISPLAY
LED DISPLAYLED DISPLAY WITH HANDFREE
LCD DISPLAY LCD DISPLAY TFT LCD MONITOR
ALARM SOUND
safe modesafe mode
alarm modealarm modedanger mode
1
2
3
4
5
200-160cm
150-100cm
90-50cm
40-30cm
0-20cm
NO
Bi----Bi----Bi
Bi--Bi--Bi
Bi-Bi-Bi
Bi------------
2.0-1.6
1.5-1.0
0.9-0.5
0.4-0.3
0.0
Stage Distance Awareness Display Alarm
CISBO RADER SYSTEM USER’S MANUAL
LED DISPLAY
-
8/9/2019 Reparacion Del Sensor de Parking
6/20
INSTALLATION FOR 2 & 4 SENSORS
1. This diagram only for 2 and4 back sensors.
2. The system begin to workwhile the car on reversingtime.
3. The display such as LEDdisplay, LCD display, onlyBuzzer, rear view mirror,detail see Page 3.
4. The sensors will be onflashing while the car on
brake t ime if the system beMatched the illuminant sensor..
5.Power line guide: Reversing light: Power on
while the car on reversingtime.
Stop light: power on while brake.
S E N S O R
A
S E N S O R
B
S E
N S O R
C
S E
N S O R
D
4 SENSORS
2 SENSORS
B L A C K
G N D
Reversing
light
R E D
+ 1 2 v
DISPLAY
MAIN BOX
INSTALL ON THE BACK BUMPER
Y E L L O W
1 2 v
Stop
light
(Only for lliuminant sensor)
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
7/20
-
8/9/2019 Reparacion Del Sensor de Parking
8/20
INSTALLATION FOR WIRELESS TYPE
1. This diagram only forwireless parking sensor.
2. The back sensors begin towork while the car onreversing time.
3.the sensors will be onflashing while the car onbrake time if the system bematched the illuminant
Sensor.4. The display such as LED
display, LCD display, onlyBuzzer, rear view mirror,detai l see Page 3.
5.Power line guide:
Reversing light : Power onwhile the car on reversingtime.
Stop light : power on whilebrake.
B L A C K
G N
D
R E D
+ 1 2
v
Y E L L O W 1 2 v
Reversing
lightStop
light
(Only for lliuminant sensor)
4 SENSORS
2 SENSORS
MAIN BOX DISPLAY
S E
N S O R
A
S E
N S O R
B
S E
N S O R
C
S E
N S O R
D
INSTALL ON THE BACK BUMPER
T O C
I G A R E T T E
J A C K
+ 1 2 V
B L A C K
G N
D
R E D
+ 1 2
v
Y E L L O W 1 2 v
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
9/20
INSTALLATION FOR VIDEO TYPE
1. This diagram only for theparking sensor with camera.
2. When the car on reversing , the back sensors and camera are working.3.The imagine will display on
the external TFT screen,while the distance wi lldisplay as well.
4. The display is used for carDVD/VCD.
5.Power line guide: Reversing light: Power on
while the car on reversingtime.
Stop light: power on whilebrake.
B L A C K
G N D
R E D
+ 1 2 v
Reversing
light
Camera
T O C
A M E R A
T O C
A M E R A
TFT Screen (optional)
D C P L U G
Y E L L
O W
V I D E O
W H I T E
B U Z Z E R
BUZZER
S E N S O R
A
S E N S O R
B
S E N S O R
C
S E N S O R
D
4 SENSORS
2 SENSORS
INSTALL ON THE BACK BUMPER
INSTALL ON THE BACK BUMPER
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
10/20
INSTALLATION FOR REARVIEW MIRROR TYPE
1. This diagram only for 4 in 1or 6 in 1 parking sensor
2. The back sensors begin towork while the car on
reversing time.3.the sensors will be on
flashing while the car onbrake time if the system bematched the illuminant
sensor.4. The funct ion see detai l
Page 15.5. The display clip on the
original rearview mirror.6.Power line guide:
Reversing light : Power onwhile the car on reversingTime.
Stop light : power on whilebrake.
Y E L L O W
1 2 v
Reversing
light(Only for lliuminant sensor)
INSTALL ON THE
BACK BUMPER
B L A C K
G N D
MAIN BOX
R E D
+ 1 2 v
Stop
light
DISPLAY
4 SENSORS
2 SENSORS
TO CIGARETTE JACK +12V
S E N S O R
A
S E N S O R
D
S E N S O R
C
S E N S O R
B
MOBILE PHONE
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
11/20
POSITION FOR EACH PART
POSITION GUIDE:1. 4 back sensors: Back
bumper.2. Camera: middle of theback bumper.3.buzzer:back side of backseat.4. Main box: Back chest.5.TFT LCD screen: amountthe sunshade board or standon the front board.6. Hands free rear view mirror:Clip on the or iginal rearviewmirror.7. Display: Stand on the front
board.8.4 front sensor: front bumper.1. 4 back sensors
4. Parking sensorsmain box
3. Buzzer
7. D Isplay
6. Hands free car kit rear view mirror
8. 4 front sensors 5. TFT LCD SCREEN
2. Camera
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
12/20
DISPLAY INSTALLATION DIAGRAM
Clean the installation position Tear the 3M paster of display Install the display The cord should be invisible
MAIN BOX INSTALLATION DIAGRAM
Locate the ma in box in therear boot at a place safe awayfrom rain,heat or humidity
Lay the wires snugy to avo idugly outlooking
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
13/20
SENSORS INSTALLATION DIAGRAM
4 sonsorsBumper Driller
Sensor
Bumper
Side vision
Stick on
Insert in
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
14/20
NOTICE FOR USER
Smooth slope Smooth round object Cotton kind barrier Rainstorm
1.Fol lwing situation will weaken the detectou effect
2.simple service
Trouble Trouble from Resolvent
Parking sensor doesn’t work
Power light on the light stat e,it still doesn’t work
display t he same number again and again
Display the wrong number
1.Power line connected wrong2.Jack connected wrong
Sensor jack connected wrongSensor can’t work
Sensor detect car body or ground
1. Jack connected wrong2.Sensor line may be damaged
1. Connected the red line to +12V2.Check each jack put the right socket
Re-connect sensor jack
Adjust the sensor posi tion and ang le
1.Power off,then refresh all jack2.Check the sensor line, be sure it doesn ’t be closed with vent-pipe or silencer
CISBO RADER SYSTEM USER’S MANUAL
-
8/9/2019 Reparacion Del Sensor de Parking
15/20
FUNCTIONS FOR LED DISPLAY SERIES
CISBO RADER SYSTEM USER’S MANUAL
1. L ED display :It is for model such as: SB303(F) ,SB305,SB306(F).SB323(F)
2.
3.4.5.
8. If no need the LED display, there are Buzzer only can be replaced
Digital LED showing obstacle distance
Alarm by three step Bi-Bi sound LED display with two side indicate.
Crescent shape digita l display screen6. 2 4 6 8 sensors are available.7. Insert in Stick on illuminate sensors are available.
2. Indicate left
1. Indicate right
3. Distance
1.Indicate left -- When the back le ft sensor detect t he obstacle, it willglitter.2.Indicate right- When the back right sensor detec t the obstacle, it willglitter.3. Distance-Display the latest the distance for all sensors.
13
-
8/9/2019 Reparacion Del Sensor de Parking
16/20
CISBO RADER SYSTEM USER’S MANUAL
FUNCTIONS FOR LCD DISPLAY SERIES
1. L CD display :It i s for model such as: SB308(F) ,SB309(F)2.
3.
Digita l LCD showing obstacle distance
Alarm by three step Bi-Bi sound4. Colour ized LCD screen or blue colour background
5. The simulat ive vehicle is displayed in the colour ized screen
6. 2 4 6 8 sensors are available.
7. Insert in Stick on i lluminate sensors are avai lable.
2.Indicate back-left
1. Indicate back-right
4.Indicate front-left
5.Indicate front-right
3.Simulate car
7.Simulate bar
6.Bracket
9.Distance
10.Background
8.Voice switch
1.Indicate back right- When the back right sensor detect the obstacle, itwill glitter.2.Indicate back left- When the back left sensor detect the obstacle, it willglitter.3.Simulate car-When reversing the car, it will show on the screen .4.Indicate front left- When the front left sensor detect the obstacle, it willglitter.5.Indicate fron t right- When the front right sensor detect t he obstacle, itwill glitter.6.Bracket-You can turn over the screen .7. Simulate bar- When the obstac le is closer, the bar will more and more.
8.Voice switch - Turn on/o ff the voice.9. Distance-Display the latest the distance for all sensors.10. Background- Blue background.
14
-
8/9/2019 Reparacion Del Sensor de Parking
17/20
1. Mic2. Volume c ontrol
3.ON/OFF4.Stand by 5.Earphone jack
6.Record7.Play8.Mute
Mic volume adjustor
A echo adjusto r 10.Signal input jack
9.Power input jack 11.Speaker
12.Indicate right
13.Distance
14.Indicate left
CISBO RADER SYSTEM USER’S MANUAL
FUNCTIONS FOR REARVIEW DISPLAY SERIES
1. L ED display :It is for model such as: SB808(F) ,SB818(F)2.3.
Digital LED showing obstacle distance Alarm by three step Bi-Bi sound
4. Rear view mirror with Guarding against dizzy light and fog function5. Hans free car ki t6. With Record, play, mute funct ion7. 2 4 6 8 sensors are available.8. Insert in Stick on illuminate sensors are available.
1.Mic - Used to receive voice f rom user.2.Volume Control - Used to control the speaker volume leve l.3.ON/OFF-ppower On and Off. When ON/OFF LED lit, the syst em iswork.4Standby - For some mobile phone system, you can press Standby buttonto receive your call(for CDMA system only).5.Earphone Output jack- For private li stening of the call.6.Record Button- Used to record message.7.Play Button- Used to play back all recorded message.8.Mute Bu tton- Used to turn off the microphone of MOBILE MIRROR .9.Power Input Jack - Accept s input plug from car power cord.
10.Hand Free Input Jack - Accept s input plug from hand free cord .11.Speaker- the phone voice wil l be directed through thi s Speaker.12.Indicate right- When the back right sensor detect the obstacle, it willlight.13.Distance- Display the latest the distance for all sensors.14.Indicate lef t- When the back le ft sensor detect t he obstacle, it willlight.
15
-
8/9/2019 Reparacion Del Sensor de Parking
18/20
FUNCTIONS FOR VIDEO DISPLAY SERIES
1. TFT LCD display :It is for model: SB838(F) ,SB868(F)2. TFT3.4.
LCD displays the practical image behind your car when reversingTwo series numbers display the distances Alarm by three step Bi-Bi sound
5. The simulative vehicle is displayed in the colourized screen 6. 2 4 sensors are available.7. With camera.8. Insert in Stick on illuminate sensors are available.
7.Right distance
3.Simulate Bar
1.Image
5.Simulate Bar
6.Simulate Bar
4.Simulate Bar
2. Left distance
1.Image- Display the rear image by Camera2.left distance- display the obstacle distance for back left 2 sensors3.simulate Bar -Indica te the back-l eft sensor working state, When theobstac le is clos er, the bar will more and more.4.simulate Bar -Indica te the back-l eft-midd le sensor working state,When the obstacle i s closer , the bar will more and more.5.simulate Bar -Indica te the back-right-middle sensor working state,When the obstacle i s closer , the bar will more and more.6.simulate Bar -Indica te the back-right sensor work ing state, When theobstac le is clos er, the bar will more and more.7.Right distance- display the obstacle distance for back right 2 sensors
CISBO RADER SYSTEM USER’S MANUAL16
-
8/9/2019 Reparacion Del Sensor de Parking
19/20
GUARANTEE FORM CISBO
GUARANTEE FORM
Model Number
Date of purchase:
Customer’s name
Telephone
Car registration Number
Stamp/signature of dealer:
Note:
1.Guarantee time:12months.2.The guarantee will be effedtive with the stamp/sugnature of
the dealer.3.Please keep the guarantee form well to ensure 12 months guarantee.
CISBO RADER SYSTEM USER’S MANUAL 17
-
8/9/2019 Reparacion Del Sensor de Parking
20/20