Download - Rehoming 3G
-
Rehoming 3G
-
Rehoming 3GStep of Rehoming 3G
Preparation & Creation site Dbase Verify dbase created in OSS before implementation Alarm collection before rehoming Rehoming Implementation Verify dbase created in OSS after implementation Alarm collection after rehoming Clean up old Dbase
-
1. Preparation & Creation Dbase
Use Rehosting Tools Open CM Editor Plan New Rehost
-
1. Preparation & Creation Dbase
Put the name and select new RNC
-
1. Preparation & Creation Dbase
-
1. Preparation & Creation Dbase
Copy WBTS config actual from CM Editor
-
1. Preparation & Creation Dbase
Paste in the xml rehost plan
-
1. Preparation & Creation Dbase
Put the new parameter ( base on data from planning )
-
1. Preparation & Creation Dbase
Fill in IPNB, WBTS, WCEL new value needed base on latest Update Datafill & Nodin data
-
1. Preparation & Creation Dbase
Provision RNW creation plan , click the green sign in Operation ( Right Above )The status should be with green ticks otherwise please do the troubleshoot
-
2. Verify the database created in OSS before implementationThe RNP Engineer will check to ensure that the sites prepared will be the same as the old database. Any discrepancies will be sent to the NIC Enginner to be corrected.
-
Alarm collecting will be done before rehome activity. These are necessary to capture any existing alarms before rehome activity. This file will be needed for documentation3. Alarm collection before rehoming
-
This work phase is moving the database to new RNC. The process includes:
Locking the old site
Recom / Configure Flexy BTS using WBTS manager Update Adjacencies
Unlock sites.4. Implentation Rehoming
-
RNP Engineer will check all sites rehomed to the new RNC, verify the database to ensure there is no discrepancies compare to the old database.5. Verify database created in OSS after impelementation
-
Alarm collecting will be done after rehome activity. These will capture all active alarms after rehome activity and this file will be needed for documentation. The pre and post alarm logs are compared to check for any new NODE B/RNC alarms. These are escalated accordingly.6. Alarm collection after rehoming
-
Delete RNW/ WBTS/ DCN and all children through RNC.
Delete Old site from Database using Network Editor. 7. Clean up old database