MAKE IT. WORK.
204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA [email protected]
REFERENCE CATALOGUE
2 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
TABLE OF CONTENTS
SECTIONS GRADESROUND BARSQUARE BARFLAT BARANGLECHANNELBEAM
WIDE FLANGE BEAM STANDARD I-BEAM
TUBING ROUND HSS SQUARE HSS RECTANGULAR HSS ERW SQUARE & RECTANGULAR ROUND MECHANICAL ERW & DOM
PIPESHEETPLATECHECKER PLATEGALVANIZED SHEETSTAINLESS SHEET & PLATEALUMINUM SHEET & PLATEEXPANDED METALBAR GRATINGSAFETY GRATINGALL THREAD RODREINFORCING BARSDATA
IMPERIAL / METRIC CONVERSIONS HARDNESS CONVERSIONS USEFUL INFORMATION
0
PAGES 1 7 8 9 12 14 17
24
50545556575859606467696970
BRUNSWICKSTEEL.COM [email protected] 1
GRADES
ASTM A-53Standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless. This grade is suitable for forming, bending, and flanging. Grade B, the most common, has a minimum yield strength of 35,000 PSI.
ASTM A-516This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. The four grades offer excellent combinations of strength, weldability and toughness to permit designers flexibility in the design of pressure vessels coming under the jurisdiction of the ASME Pressure Vessel Code.
ASTM A-36One of the most familiar grades of steel having minimum physical properties specified. Still the accepted standard in the U.S. it is similar in properties to the more common 44W but with lower yield and tensile strengths. This grade is widely available in the form of hot rolled merchant bars, shapes, and plate steel.Yield Strength – 36,000 PSI minimumTensile Strength – 58 – 80,000 PSI
ASTM A-500 GRADE CThe most common U.S. standard specification for cold-formed, welded carbon steel Hollow Structural Sections (HSS).Yield Strength – 46,000 PSI minimumTensile Strength – 62,000 PSI minimum
ASTM A-572 GRADE 50Structural quality, high strength, low alloy steel. Used for structural steel shapes in the construction of bridges and building construction. Weldable by all of the standard methods.Yield Strength – 50,000 PSI minimumTensile Strength – 70 – 95,000 PSI
2 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
GRADES
ASTM A992 / A992MThis specification covers rolled steel structural shapes for use in building framing, bridges or for general structural purposes and replaces A36 and A572 grade 50. Weldable by all of the standard methods.Yield Strength – 50,000 PSI minimumTensile Strength – 65,000 PSI minimum
ASTM A-1011Standard specification for hot rolled sheets, commercial quality. No minimum physical properties are specified. Suitable for moderate forming and bending.Typical Yield Strength – 29,000 PSITypical Tensile Strength – 53,000 PSI
ASTM A-1008Standard specification for cold rolled sheet, commercial quality. No minimum physical properties are specified. Good formability.
ASTM A-526/527Standard specification for galvanized steel sheet commercial/lock forming quality. No minimum physical properties are specified. Good to excellent formability. Various coating weights (thicknesses of zinc) are produced.
ASTM A-242High strength low alloy steel plate (comparable to CSA G40.21-50A). Intended for applications requiring improved strength levels and increased resistance to atmospheric corrosion. Commonly known by the trade names ‘Corten’, ‘Dofascoloy’, ‘Stelcaloy’.Yield Strength – 50,000 PSI minimumTensile Strength – 70,000 PSI minimum
ASTM A-606Comparable in properties to the plate grade ASTM A-242, but produced in sheet thickness.
BRUNSWICKSTEEL.COM [email protected] 3
GRADES
COMMERCIAL QUALITYCommercial Quality (CQ) steel is ordinarily produced from killed or semi-killed steel and does not have a high degree of uniformity in chemical composition a nd mechanical properties. CQ steel is furnished when specific mechanical test values are not required and where surface imperfections are not objectionable. Typical Yield Strength – 30,000 PSITypical Tensile Strength – 50,000 PSI
AISI-C1018Standard “Garden Variety” cold finished bar grade intended for general use, such as shaping applications not requiring high strength. No minimum physical properties are specified. Generally available in rounds, squares, and flat bars.Typical Yield Strength – 54,000 PSITypical Tensile Strength – 64,000 PSI
AISI-C1045Widely stocked as precision ground shafting. Intended for applications requiring increased strength and improved dimensional tolerances. Typical Yield Strength – 77,000 PSITypical Tensile Strength – 91,000 PSI
AISI-C12L14Cold finished bar with the addition of lead to produce much improved machinability. Available primarily as round and hex bars. No minimum physical properties are specified.Typical Yield Strength – 60 – 75,000 PSITypical Tensile Strength – 70 – 85,000 PSI
AISI-C1144 STRESS RELIEVEDCold finished bar intended for applications requiring increased strength values. The sulfur content enhances machinability and it has excellent induction hardening properties. It is generally available as round bars. Welding is not recommended.Yield Strength – 100,000 PSI minimumTensile Strength – 125,000 PSI minimum
4 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
GRADES
CSA G40.21-44W (300W)The current Canadian standard for steel produced to meet minimum physical properties. Commonly available as hot rolled merchant bars, shapes, and plate steel. Designed to be used in typical welded applications.Yield Strength – 44,000 PSI minimumTensile Strength – 65 – 90,000 PSI
CSA G40.21-50W (350W)Similar in properties to the more common 44W, but with higher yield strengths. Limited availability in structural shapes and plate material. Widely used in production of Hollow Structural Sections (HSS).Yield Strength – 50,000 PSI minimumTensile Strength – 70 – 95,000 PSI
CSA G40.21-50A (350A)Comparable in physical properties to the 50W grade, but with additions to improve the steel’s atmospheric corrosion resistance while maintaining good weldability. Available primarily as plate.Yield Strength – 50,000 PSI minimumTensile Strength – 70 – 95,000 PSI
AR-200Abrasion resistant steel intended for low impact abrasion applications.Brinell Hardness – 180 – 200 Brinell
STRENX 700 Structural plate manufactured by SSAB intended for applications where its high strength permits weight savings to be made. This replaces similar products produced by various mills under a variety of names including T-1 Construction Alloy, CHT-100, QT-100.Yield Strength – 100,000 PSI minimumTensile Strength – 115,000 PSI minimum
BRUNSWICKSTEEL.COM [email protected] 5
GRADES
STRENX 900Structural plate manufactured by SSAB intended for applications where its high strength permits weight savings to be made. Similar to Strenx 700 but with higher minimum yield strengths.Yield Strength – 130,000 PSI minimum
HARDOX 450Wear plate manufactured by SSAB intended for applications requiring high abrasion resistance. Due to its high toughness, bending and welding properties, it can also be used as a load bearing plate. This replaces similar products produced by various mills under a variety of names including T-1 Abrasion Resistant, CHT-360/425, AR-360/425. Produced with a range of 425-475 Brinell Hardness.Typical Yield Strength – 175,000 PSITypical Tensile Strength – 190,000 PSI
HARDOX 500Wear plate manufactured by SSAB intended for applications requiring superior abrasion resistance. This steel is a unique combination of toughness and hardness similar to Hardox 450 but produced with a Brinell Hardness range of 450-540.Typical Yield Strength – 175,000 PSITypical Tensile Strength – 190,000 PSI
STAINLESS STEEL T304, T304LA widely used general purpose stainless steel. It is excellent for forming, drawing and welding, and provides good corrosion resistance without post-weld annealing. The extra low carbon of T-304L permits the use of this steel in corrosive service in the as-welded condition.Typical Yield Strength – 33,000 – 42,000 PSITypical Tensile Strength – 79,000 – 85,000 PSI
6 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
GRADES
STAINLESS STEEL T316, T316LSimilar to T304 and T304L but with the addition of molybdenum which greatly increases its corrosion resistance and its mechanical properties at elevated temperatures. The combination of corrosion resistance and high tensile strength, plus good cold forming and drawing properties makes T-316 suitable for a very wide range of applications.Typical Yield Strength – 30,000 – 42,000 PSITypical Tensile Strength – 75,000 – 84,000 PSI
ALUMINUM 5052-H32This alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and it is often used in high strength sheet metal work and marine components.Typical Yield Strength – 28,000 PSITypical Tensile Strength – 33,000 PSI
ALUMINUM 6061-T6This is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability.Typical Yield Strength – 41,000 PSITypical Tensile Strength – 44,000 PSI
BRUNSWICKSTEEL.COM [email protected] 7
ROUND BAR
1/8 dia.3/161/45/163/87/161/29/165/811/163/413/167/815/16
11 1/161 1/81 3/161 1/41 5/161 3/81 7/161 1/21 9/161 5/81 11/161 3/41 13/161 7/81 15/16
22 1/162 1/82 3/16 2 1/42 5/162 3/82 7/162 1/22 9/162 5/82 11/162 3/42 13/162 7/82 15/16
3 dia.3 1/163 1/83 3/16 3 1/43 5/163 3/83 7/163 1/23 5/83 11/163 3/43 7/83 15/16
44 3/16 4 1/44 7/164 1/24 3/44 15/16
55 1/4 5 7/165 1/25 3/45 15/16
6
7
88 1/48 1/28 3/4
99 1/49 1/2 1010 1/2
1111 1/2
12
13
.042
.094
.167
.261
.376
.511
.668
.8451.041.261.501.762.042.35
2.673.013.383.774.174.605.055.526.016.527.057.608.188.779.3910.02
10.6811.3612.0612.7813.5214.2815.0615.8616.6917.5318.4019.2820.1921.1222.0723.04
24.0325.0426.0727.1328.2029.3030.4131.5532.7135.0936.3137.5540.0941.40
42.7246.8248.2352.5854.0760.2465.09
66.7573.5978.9580.7888.2894.13
96.13
130.85
170.90181.80192.93204.45
216.30228.50241.00
267.00294.40
323.00353.00
384.53
451.00
Size (inches) Weight (lbs per ft.) Size (inches) Weight (lbs per ft.)
8 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
SQUARE BAR
1/8 sq.3/161/45/163/87/161/29/165/811/163/47/815/16
11 1/81 1/4
1 3/8 sq.1 1/21 5/81 3/41 7/8
22 1/42 1/22 3/4
33 1/43 1/23 3/4
4
.053
.120
.213
.332
.478
.651
.8501.081.331.611.912.602.99
3.404.305.31
6.437.658.9810.4111.95
13.6017.2121.2525.71
30.6035.9141.6547.81
54.40
Size (inches) Weight (lbs per ft.) Size (inches) Weight (lbs per ft.)
BRUNSWICKSTEEL.COM [email protected] 9
FLAT BAR
1/8 x 1/4 3/8 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 5 6
3/16 x 5/16 3/8 1/2 5/8 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 5 6
1/4 x 5/16 3/8 1/2 5/8
1/4 x 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/2 4 4 1/2 5 6 8 10 12
5/16 x 3/8 1/2 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 5 6 8
3/8 x 1/2 5/8 3/4 7/8 1
.106
.159
.213
.266
.319
.372
.425
.478
.531
.638
.744
.850
.9561.0631.2751.4881.7002.1252.550
.199
.239
.319
.398
.478
.558
.638
.797
.9561.1161.2751.4341.5941.9132.2302.5503.1883.825
.266
.319
.425
.531
.638
.744
.8501.0631.2751.4881.7001.9132.1252.3382.5502.9753.4003.8254.2505.1006.8008.50010.200
.398
.531
.797
.9301.0631.3281.5941.8592.1252.3902.6563.1883.7194.2505.3136.3758.500
.638
.797
.9561.1161.275
Size (inches) Weight (lbs per ft.) Size (inches) Weight (lbs per ft.)
10 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
FLAT BAR
Size (inches) Weight (lbs per ft.) Size (inches) Weight (lbs per ft.)
3/8 x 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 4 1/2 5 6 8 10 12
1/2 x 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/4 3 1/2 4 4 1/2 5 6 8 10 12
5/8 x 3/4 7/8 1 1 1/4
5/8 x 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/2 3 3/4 4 5 5 1/2 6 8 10 12
3/4 x 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/2 4 4 1/2 5 6 6 1/2 8 10 12
7/8 x 1 1 1/2 2 3 4
1.5941.7531.9132.2312.5502.8693.1883.8254.4635.1005.7386.3757.65010.2012.75015.300
1.0631.2751.4881.7001.9132.1252.5502.9753.4003.8254.2505.1005.5255.9506.8007.6508.50010.20013.60017.00020.400
1.5941.8592.1252.656
3.1883.7194.2504.7815.3135.8446.3757.4387.9698.50010.62511.68812.75017.00021.25025.500
2.2312.5502.8693.1883.8254.4635.1005.7386.3757.0137.6508.92510.20011.47512.75015.30016.57520.40025.50030.600
2.9754.4635.9508.92511.900
BRUNSWICKSTEEL.COM [email protected] 11
FLAT BAR
Size (inches) Weight (lbs per ft.) Size (inches) Weight (lbs per ft.)
7/8 x 5 6
1 x 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2 3
1 x 3 1/2 4 4 1/2 5 5 1/2 6 8 10 11 12
1 1/4 x 1 1/2 1 3/4 2 2 1/4 2 1/2 3 3 1/2 4 4 1/2 5 5 1/2 6 8 10
1 1/2 x 1 3/4 2 2 1/2 3 3 1/2 3 3/4
4 5 6 8 8 1/2 10 12
1 3/4 x 2 2 1/2 3 3 1/2 4 5 1/2 6
2 x 2 1/2 2 3/4 3 3 1/2 3 3/4 4 5 6 8 10 12
2 1/2 x 3 4 5 6 3 x 3 1/2 4 6
14.87517.850
4.2504.6755.1005.9506.8007.6508.50010.200
11.90013.60015.30017.00018.70020.40027.20034.00037.40040.800
6.3757.4388.5009.56310.62512.75014.87517.00019.12521.25023.37525.50034.00042.500
8.92510.20012.75015.30017.85019.125
20.40025.50030.60040.80043.35051.00061.200
11.90014.87517.85020.82523.80032.72535.700
17.00018.70020.40023.80025.50027.20034.00040.80054.40068.00081.600
25.50034.00042.50051.000
35.70040.80061.200
12 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
EQUAL LEG ANGLE
Size SizeWeight(lbs per ft.)
Weight(lbs per ft.)
Thickness(inches)
Thickness(inches)
1/2 x 1/2
5/8 x 5/8
3/4 x 3/4
7/8 x 7/8
1 x 1
1 1/4 x 1 1/4
1 1/2 x 1 1/2
1 3/4 x 1 3/4
2 x 2
2 1/2 x 2 1/2
3 x 3
.38
.48
.59
.84
.701.00
.801.161.49
1.011.481.922.33
1.231.802.342.863.35
1.442.122.773.39
1.652.443.193.924.70
2.083.074.105.005.907.70
3.74.9
5/163/87/161/2
1/45/163/87/161/2
1/45/163/87/161/25/83/4
5/163/87/161/25/83/47/8
5/163/87/161/29/165/83/47/81
1/29/165/83/47/8111/8
1/8
1/8
1/83/16
1/83/16
1/83/161/4
1/83/161/45/16
1/83/161/45/163/8
1/83/161/45/16
1/83/161/45/163/8
1/83/161/45/163/81/2
3/161/4
3 x 3
3 1/2 x 3 1/2
4 x 4
5 x 5
6 x 6
8 x 8
6.17.28.39.4
5.87.28.59.811.1
6.68.29.811.312.815.718.5
10.312.314.316.220.023.627.2
12.414.917.219.621.924.228.733.137.4
26.429.332.738.945.051.056.9
BRUNSWICKSTEEL.COM [email protected] 13
UNEQUAL LEG ANGLE
Size SizeWeight(lbs per ft.)
Weight(lbs per ft.)
Thickness(inches)
Thickness(inches)
2 x 1 1/2
2 1/2 x 2
3 x 2
3 x 2 1/2
3 1/2 x 2 1/2
3 1/2 x 3
4 x 3
4 x 3 1/2
1.442.122.773.36
1.862.753.624.505.30
3.074.105.005.906.807.70
3.74.55.66.68.5
3.74.96.17.28.39.4
5.46.67.99.110.2
5.87.28.59.811.113.6
6.27.79.110.611.9
5/8
1/45/163/87/161/2
1/45/163/87/161/25/83/4
5/163/81/2
1/45/163/87/161/29/165/83/47/81
3/81/2
7/161/29/165/83/47/81
7/161/29/165/83/47/81
1/83/161/45/16
1/83/16 1/45/163/8
3/161/45/163/87/161/2
3/161/45/163/81/2
3/161/45/163/87/161/2
1/45/163/87/161/2
1/45/163/87/161/25/8
1/45/163/87/161/2
4 x 3 1/2
5 x 3
5 x 3 1/2
6 x 3 1/2
6 x 4
7 x 4
8 x 4
8 x 6
14.7
6.68.29.811.312.8
7.08.710.412.013.616.819.8
9.811.715.3
8.310.312.314.316.218.120.023.627.230.6
13.617.9
17.219.621.924.228.733.137.4
20.223.025.728.533.839.144.2
14 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
STEEL CHANNEL
Size (inches) Weight (lbs per ft.) Size (inches) Weight (lbs per ft.)
3/4 x 3/8 x 1/8
1 x 1/2 x 1/8
1 1/4 x 1/2 x 1/8
1 1/2 x 1/2 x 1/8
1 1/2 x 9/16 x 3/16
1 1/2 x 3/4 x 1/8
2 x 1/2 x 1/82 x 5/8 x 3/16
2 x 5/8 x 1/4
2 x 9/16 x 3/16
2 x 1 x 1/8
2 x 1 x 3/16
2 1/2 x 5/8 x 3/16
.54
.84
1.00
1.12
1.44
1.17
1.431.47
2.28
1.86
1.59
2.32
2.27
BRUNSWICKSTEEL.COM [email protected] 15
FLANGE
WIDTH
WEB
DE
PT
H
STANDARD CHANNEL
C3 x 3.5 x 4.1 x 5.0 x 6.0
C4 x 4.5 x 5.4 x 6.25 x 7.25
C5 x 6.7 x 9.0 x 11.5
C6 x 8.2 x 10.5 x 13.0
C7 x 9.8 x 12.25 x 14.75
C8 x 11.5 x 13.75 x 18.75
C9 x 13.4 x 15.0 x 20.0
C10 x 15.3 x 20.0 x 25.0 x 30.0
C12 x 20.7 x 25.0 x 30.0
C15 x 33.9 x 40.0 x 50.0
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
12.00
15.00
.273
.273
.273
.273
.296
.296
.296
.296
.320
.320
.320
.343
.343
.343
.366
.366
.366
.390
.390
.390
.413
.413
.413
.436
.436
.436
.436
.501
.501
.501
.650
.650
.650
C75 x 5 x 6 x 7 x 9
C100 x 7 x 8 x 9 x 11
C130 x 10 x 13 x 17
C150 x 12 x 16 x 19
C180 x 15 x 18 x 22
C200 x 17 x 21 x 28
C230 x 20 x 22 x 30
C250 x 23 x 30 x 37 x 45
C310 x 31 x 37 x 45
C380 x 50 x 60 x 74
1.361.411.501.60
1.521.581.651.72
1.751.882.03
1.922.032.16
2.092.192.30
2.262.342.53
2.432.482.65
2.602.742.893.03
2.943.053.17
3.403.523.72
.125
.170
.258
.356
.145
.184
.247
.321
.190
.325
.472
.200
.314
.437
.210
.314
.419
.220
.303
.487
.233
.285
.448
.240
.379
.526
.673
.282
.387
.510
.400
.520
.716
Imperial Depth (inches)
Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
16 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MISCELLANEOUS CHANNEL
MC 3 x 7.1 MC 4 x 13.8 MC 6 x 6.5 x 7.0 x 12.0 x 15.1 x 15.3 x 16.3 x 18.0 MC 7 x 17.6 x 19.1 x 22.7 MC 8 x 6.6 x 8.5 x 18.7 x 20.0 x 21.4 x 22.8 MC 9 x 23.9 x 25.4 MC 10 x 6.5 x 8.4 x 22.0 x 25.0 x 28.5 x 33.6 x 41.1 MC 12 x 10.60 x 31.0 x 35.0 x 40.0 x 45.0 x 50.0 MC 13 x 27.3 x 31.8 x 35.0 x 40.0 x 50.0 MC18 x 42.7 x 45.8 x 51.9 x 58.0
3.0
4.0
6.06.06.06.06.06.06.0
7.07.07.0
8.08.08.08.08.08.0
9.09.0
10.010.010.010.010.010.010.0
12.012.012.012.012.012.0
13.013.013.013.013.0
18.018.018.018.0
0.350
0.500
0.2900.2900.3800.4800.3900.4800.480
0.4800.5000.500
0.2600.3100.5000.5000.5300.530
0.5500.550
0.2000.2800.5750.5750.5750.5750.575
0.3100.7000.7000.7000.7000.700
0.6100.6100.6100.6100.610
0.6250.6250.6250.625
MC 75 x 10.6
MC 100 x 20.6 MC 150 x 9.7 x 10.4 x 17.9 x 22.5 x 22.8 x 24.3 x 26.8
MC 175 x 26.2 x 28.5 x 33.8
MC 200 x 9.8 x 12.7 x 27.9 x 29.8 x 31.9 x 34.0
MC 230 x 35.6 x 37.8
MC 250 x 9.7 x 12.5 x 33.0 x 37.0 x 42.4 x 50.0 x 61.2
MC 310 x 15.8 x 46.0 x 52.0 x 60.0 x 67.0 x 74.0 MC 330 x 40.7 x 47.3 x 52.0 x 60.0 x 74.0
MC 460 x 63.5 x 68.2 x 77.2 x 86.0
1.940
2.500
1.8501.8802.5002.9403.5003.0003.500
3.0003.4503.600
1.7501.8702.9803.0303.4503.500
3.4503.500
1.1301.5003.3153.4104.3214.1003.950
1.5003.6703.7653.8904.0104.135
3.8904.0004.0724.1854.412
3.9504.0004.1004.200
0.310
0.500
0.1600.1800.3100.3200.3400.3800.380
0.3800.3500.500
0.1400.1800.3500.4000.3800.430
0.4000.450
0.1500.1700.2900.3800.4250.5750.796
0.1900.3700.4650.5900.7100.935
0.2700.3750.4470.5600.787
0.4500.5000.6000.700
Imperial Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
Depth (inches)
BRUNSWICKSTEEL.COM [email protected] 17
FLANGE
WIDTH
WEB
DE
PT
H
W4 x 13
W5 x 16 x 19
W6 x 8.5 x 9 x 12 x 16
W6 x 15 x 20 x 25
W8 x 10 x 13 x 15
W8 x 14 x 18 x 21
W8 x 24 x 28
W8 x 31 x 35 x 40 x 48 x 58 x 67
W10 x 12 x 15 x 17 x 19
W10 x 16 x 22 x 26 x 30
W10 x 33 x 39 x 45
4.16
5.015.15
5.835.906.036.28
5.996.206.38
7.897.998.11
7.988.148.28
7.938.06
8.008.128.258.508.759.00
9.879.9910.1110.24
9.9510.1710.3310.47
9.739.9210.10
.345
.360
.430
.194
.215
.280
.405
.260
.365
.455
.205
.255
.315
.250
.330
.400
.400
.465
.435
.495
.560
.685
.810
.935
.210
.270
.330
.395
.250
.360
.440
.510
.435
.530
.620
W100 x 19
W130 x 24 x 28
W150 x 13 x 14 x 18 x 24
W150 x 22 x 30 x 37
W200 x 15 x 19 x 22
W200 x 21 x 27 x 31
W200 x 36 x 42
W200 x 46 x 52 x 59 x 71 x 86 x 100
W250 x 18 x 22 x 25 x 28
W250 x 24 x 33 x 39 x 45
W250 x 49 x 58 x 67
4.06
5.005.03
3.943.944.004.03
5.996.026.08
3.944.004.02
5.215.255.27
6.506.54
8.008.028.078.118.228.28
3.964.004.014.02
5.715.755.775.81
7.967.988.02
.280
.240
.270
.170
.170
.230
.260
.230
.260
.320
.170
.230
.245
.195
.230
.250
.245
.285
.285
.310
.360
.400
.510
.570
.190
.230
.240
.250
.195
.240
.260
.300
.290
.315
.350
WIDE FLANGE BEAM (W)
Imperial Depth (inches)
Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
18 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
WIDE FLANGE BEAM (W)
W10 x 49 x 54 x 60 x 68 x 77 x 88 x 100 x 112
W12 x 14 x 16 x 19 x 22
W12 x 21 x 26 x 30 x 35
W12 x 40 x 54 x 50
W12 x 53 x 58
W12 x 65 x 72 x 79 x 87 x 96 x 106 x 120 x 136 x 152 x 170 x 190 x 210 x 230
W14 x 22 x 26
W14 x 30 x 34 x 38
9.9810.0910.2210.4010.6010.8411.1011.36
11.9111.9912.1612.31
12.0412.2212.3412.50
11.9412.0612.19
12.0612.19
12.1212.2512.3812.5312.7112.8913.1213.4113.7114.0314.3814.7115.05
13.7413.91
13.8413.9814.10
.560
.615
.680
.770
.870
.9901.1201.250
.225
.265
.350
.425
.290
.380
.440
.520
.515
.575
.640
.575
.640
.605
.670
.735
.810
.900
.9901.1001.2501.4001.5601.7401.9002.070
.335
.420
.385
.455
.515
W250 x 73 x 80 x 89 x 101 x 115 x 131 x 149 x 167
W310 x 21 x 24 x 28 x 33
W310 x 31 x 39 x 45 x 52
W310 x 60 x 67 x 74
W310 x 79 x 86
W310 x 97 x 107 x 118 x 129 x 143 x 158 x 179 x 202 x 226 x 253 x 283 x 313 x 342
W360 x 33 x 39
W360 x 45 x 51 x 57
10.0010.0310.0810.1310.1910.2610.3410.42
3.973.994.004.03
6.456.496.526.56
8.008.048.08
10.0010.01
12.0012.0412.0812.1212.1612.2212.3212.4012.4812.5712.6712.7912.90
5.005.02
6.736.746.77
.340
.370
.420
.470
.530
.605
.680
.755
.200
.220
.235
.260
.195
.230
.260
.300
.295
.335
.370
.345
.360
.390
.430
.470
.515
.550
.610
.710
.790
.870
.9601.0601.1801.290
.230
.255
.270
.285
.310
Imperial Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
Depth (inches)
BRUNSWICKSTEEL.COM [email protected] 19
WIDE FLANGE BEAM (W)
W14 x 43 x 48 x 53
W14 x 61 x 68 x 74 x 82
W14 x 90 x 99 x 109 x 120 x 132
W14 x 145 x 159 x 176 x 193 x 211 x 233 x 257 x 283 x 311 x 342 x 370 x 398 x 426
W14 x 455 x 500 x 550 x 605 x 665 x 730
W16 x 26 x 31
W16 x 36 x 40 x 45 x 50 x 57
13.6613.7913.92
13.8914.0414.1714.31
14.0214.1614.3214.4814.66
14.7814.9815.2215.4815.7216.0416.3816.7417.1217.5417.9218.2918.67
19.0219.6020.2420.9221.6422.42
15.6915.88
15.8616.0116.1316.2616.43
.530
.595
.660
.645
.720
.785
.855
.710
.780
.860
.9401.030
1.0901.1901.3101.4401.5601.7201.8902.0702.2602.4702.6602.8403.040
3.2103.5003.8204.1604.5204.910
.345
.440
.430
.505
.565
.630
.715
W360 x 64 x 72 x 79
W360 x 91 x 101 x 110 x 122
W360 x 134 x 147 x 162 x 179 x 196
W360 x 216 x 237 x 262 x 287 x 314 x 347 x 382 x 421 x 463 x 509 x 551 x 592 x 634
W360 x 677 x 744 x 818 x 900 x 990 x 1086
W410 x 39 x 46
W410 x 54 x 60 x 67 x 74 x 85
8.008.038.06
10.0010.0410.0710.13
14.5214.5614.6014.6714.72
15.5015.5615.6515.7115.8015.8916.0016.1116.2316.3616.4816.5916.70
16.8417.0117.2017.4217.6517.89
5.505.52
6.987.007.047.077.12
.305
.340
.370
.375
.415
.450
.510
.440
.485
.525
.590
.645
.680
.745
.830
.890
.9801.0701.1801.2901.4101.5401.6601.7701.880
2.0202.1902.3802.6002.8303.070
.250
.275
.295
.305
.345
.380
.430
Imperial Depth (inches)
Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
20 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
W16 x 67 x 77 x 89 x 100
W18 x 35 x 40 x 46
W18 x 41 x 45 x 50 x 55 x 60 x 65 x 71
W18 x 76 x 86 x 97 x 106 x 119 x 130 x 143 x 158 x 175 x 192
W21 x 44 x 50 x 57
W21 x 48 x 55 x 62 x 68 x 73 x 83 x 93
W21 x 101 x 111 x 122 x 132 x 147 x 166
16.3316.5216.7516.97
17.7017.9018.06
17.7017.8617.9918.1118.2418.3518.47
18.2118.3918.5918.7318.9719.2519.4919.7220.0420.35
20.6620.8321.06
20.6220.8020.9921.1321.2421.4321.62
21.3621.5121.6821.8322.0622.48
.665
.760
.875
.985
.425
.525
.605
.425
.499
.570
.630
.695
.750
.810
.680
.770
.870
.9401.0601.2001.3201.4401.5901.750
.450
.535
.650
.430
.522
.615
.685
.740
.835
.930
.800
.875
.9601.0401.1501.360
W410 x 100 x 114 x 132 x 149
W460 x 52 x 60 x 68
W460 x 61 x 67 x 74 x 82 x 89 x 97 x 106
W460 x 113 x 128 x 144 x 158 x 177 x 193 x 213 x 235 x 260 x 286
W530 x 66 x 74 x 85
W530 x 72 x 82 x 92 x 101 x 109 x 123 x 138
W530 x 150 x 165 x 182 x 196 x 219 x 248
10.2410.3010.3610.42
6.006.026.06
7.457.487.507.537.567.597.64
11.0411.0911.1411.2011.2611.16011.22011.30011.37511.455
6.506.536.56
8.148.228.248.278.308.368.42
12.2912.3412.3912.4412.5112.42
.395
.455
.525
.585
.300
.315
.360
.320
.335
.355
.390
.415
.450
.495
.425
.480
.535
.590
.655
.670
.730
.810
.890
.960
.350
.380
.405
.350
.375
.400
.430
.455
.515
.580
.500
.550
.600
.650
.720
.750
WIDE FLANGE BEAM (W)
Imperial Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
Depth (inches)
BRUNSWICKSTEEL.COM [email protected] 21
W24 x 55 x 62
W24 x 56 x 61 x 68 x 76 x 84 x 94 x 103
W24 x 104 x 117 x 131 x 146 x 162 x 176
W27 x 84 x 94 x 102 x 114 x 129
W27 x 146 x 161 x 178 x 194
W30 x 90 x 99 x 108 x 116 x 124 x 132 x 148
W30 x 173 x 191 x 211 x 235
W33 x 118 x 130 x 141 x 152 x 169
23.5723.74
23.4623.5423.7323.9224.1024.3124.53
24.0624.2624.4824.7425.0025.24
26.7126.9227.0927.2927.63
27.3827.5927.8128.11
29.5329.6529.8330.0130.1730.3130.67
30.4430.6830.9431.30
32.8633.0933.3033.4933.82
.505
.590
.461
.500
.585
.680
.770
.875
.980
.750
.850
.9601.0901.2201.340
.640
.745
.830
.9301.100
.9751.0801.1901.340
.610
.670
.760
.850
.9301.0001.180
1.0601.1801.3101.500
.740
.855
.9601.0601.220
W610 x 82 x 92
W610 x 84 x 91 x 101 x 113 x 125 x 140 x 153
W610 x 155 x 174 x 195 x 217 x 241 x 262
W690 x 125 x 140 x 152 x 170 x 192
W690 x 217 x 240 x 265 x 289
W760 x 134 x 147 x 161 x 173 x 185 x 196 x 220
W760 x 257 x 284 x 314 x 350
W840 x 176 x 193 x 210 x 226 x 251
7.007.04
8.908.948.968.999.029.069.00
12.7512.8012.8612.9012.9612.89
9.969.9910.0210.0710.01
13.9614.0214.0814.04
10.4010.4510.4810.5010.5210.5410.48
14.9815.0415.1015.06
11.4811.5111.5411.5611.50
.395
.430
.355
.380
.415
.440
.470
.515
.550
.500
.550
.605
.650
.705
.750
.460
.490
.515
.570
.610
.605
.660
.725
.750
.470
.520
.545
.565
.585
.615
.650
.655
.710
.775
.830
.550
.580
.605
.635
.670
WIDE FLANGE BEAM (W)
Imperial Depth (inches)
Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
22 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
W33 x 201 x 221 x 241
W36 x 135 x 150 x 160 x 170 x 182 x 194 x 210
W36 x 231 x 247 x 262 x 282 x 302
W40 x 149 x 167 x 183 x 211 x 235 x 264 x 294 x 327
W40 x 174 x 199 x 215 x 249 x 277 x 297 x 324 x 362 x 372 x 397 x 431 x 503 x 593
W44 x 230 x 262 x 290 x 335
33.6833.9334.18
35.5535.8536.0136.1736.3336.4936.69
35.9036.0836.2636.5236.74
38.2038.6039.0039.4039.7040.0040.4040.80
38.238.739.039.439.739.840.240.640.641.041.342.143.0
42.943.343.644.0
1.1501.2801.400
.790
.9401.0201.1001.1801.2601.360
1.2601.3501.4401.5701.680
.8301.0251.2001.4151.5751.7301.9302.130
0.8301.0651.2201.4201.5751.6501.7702.0102.0452.2002.3602.7603.230
1.2201.4201.5801.770
W840 x 299 x 329 x 359
W920 x 201 x 223 x 238 x 253 x 271 x 289 x 313
W920 x 342 x 365 x 387 x 417 x 446
W1000 x 222 x 249 x 272 x 314 x 350 x 393 x 414 x 493
W1000 x 258 x 296 x 321 x 371 x 412 x 443 x 483 x 539 x 554 x 591 x 642 x 748 x 883
W1100 x 343 x 390 x 433 x 499
15.7415.8015.86
11.9511.9812.0012.0312.0812.1212.18
16.4716.5116.5516.6016.66
11.8111.8111.8111.8111.8911.9312.0112.13
15.75015.75015.75015.75015.83015.82515.91016.02016.06016.12016.22016.42016.690
15.75015.75015.83015.950
.715
.775
.830
.600
.625
.650
.680
.725
.765
.830
.760
.800
.840
.885
.945
.630
.650
.650
.750
.830
.9601.0601.180
0.6500.6500.6500.7500.8300.9301.0001.1201.1601.2201.3401.5401.790
0.7100.7900.8701.020
WIDE FLANGE BEAM (W)
Imperial Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
Depth (inches)
BRUNSWICKSTEEL.COM [email protected] 23
FLANGE
WIDTH
WEB
DE
PT
H
3” x 2.94” x 3.2
S3 x 5.7 x 7.5
S4 x 7.7 x 9.5
S5 x 10.0
S6 x 12.5 x 17.25
S8 x 18.4 x 23.0
S10 x 25.4 x 35.0
S12 x 31.8 x 35.0 x 40.8 x 50.0
S15 x 42.9 x 50.0
S18 x 54.7 x 70.00
S20 x 66.0 x 75.0 x 86.0 x 96.0
S24 x 80.0 x 90.0 x 100.0 x 106.0 x 121.0
3.004.00
3.003.00
4.004.00
5.00
6.006.00
8.008.00
10.0010.00
12.0012.0012.0012.00
15.0015.00
18.0018.00
20.0020.0020.3020.30
24.0024.0024.0024.5024.50
.125
.125
.260
.260
.293
.293
.326
.359
.359
.425
.425
.491
.491
.544
.544
.659
.659
.622
.622
.691
.691
.795
.795
.920
.920
.870
.870
.8701.0901.090
SuperlightSuperlight
S75 x 8 x 11
S100 x 11 x 14.1
S130 x 15
S150 x 19 x 26
S200 x 27 x 34
S250 x 38 x 52
S310 x 47 x 52 x 60.7 x 74
S380 x 64 x 74
S460 x 81.4 x 104
S510 x 98 x 112 x 128 x 143
S610 x 119 x 134 x 149 x 158 x 180
2.252.25
2.332.51
2.662.80
3.00
3.333.56
4.004.17
4.664.94
5.005.085.255.48
5.505.64
6.006.25
6.266.397.067.20
7.007.137.247.878.05
.125
.125
.170
.349
.193
.326
.214
.232
.465
.271
.441
.311
.594
.350
.428
.462
.687
.411
.550
.461
.711
.505
.635
.660
.800
.500
.625
.745
.620
.800
STANDARD I-BEAM (S)
Imperial Depth (inches)
Flange Thickness (mean, inches)
Metric Flange Width (inches) Web Thickness (inches)
24 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
1.050
1.315
1.660
1.690
1.900
2.000
2.375
2.875
3.000
3.500
3.750
4.000
4.500
1.021.241.60
1.301.59
1.672.05
1.702.09
2.102.382.813.45
2.032.503.64
2.433.013.574.405.68
3.685.407.01
3.845.667.35
6.668.6910.66
3.904.857.169.36
5.177.6710.0212.3414.52
5.858.6811.36
.313
.375
.125
.188
.250
.313
.375
.188
.250
.313
.125
.188
.250
.313
.375
.188
.250
.313
.375
.188
.250
.313
.375
.438
.500
.250
.313
.375
.438
.500
.250
.313
.375
.438
.500
.250
.313
.375
.438
.500
.250
.313
.375
.438
.500
.100
.125
.134
.100
.125
.100
.125
.100
.125
.110
.125
.150
.188
.100
.125
.188
.100
.125
.150
.188
.250
.125
.188
.250
.125
.188
.250
.188
.250
.313
.100
.125
.188
.250
.125
.188
.250
.313
.375
.125
.188
.250
4.500
5.000
5.562
6.000
6.625
8.625
10.750
12.750
14.000
16.000
14.0116.54
6.529.6712.6915.6918.54
10.8014.2017.60
7.5411.6815.3719.0322.55
13.0017.0021.1025.10
17.0022.4027.8033.1038.4043.40
28.1034.9041.6048.3054.80
33.4041.6049.6057.7065.50
36.8045.8054.7063.5072.20
42.1052.5062.7072.9082.90
O.D. (inches)
Weight(lbs per ft.)
Wall Thickness (inches)
Wall Thickness (inches)
O.D.(inches)
Weight(lbs per ft.)
ROUND STRUCTURAL TUBING (HSS)
BRUNSWICKSTEEL.COM [email protected] 25
O.D. (inches)
Weight(lbs per ft.)
Wall Thickness (inches)
Wall Thickness (inches)
O.D.(inches)
Weight(lbs per ft.)
1 x 1
1 1/4 x 1 1/4
1 1/2 x 1 1/2
2 x 2
2 1/4 x 2 1/4
2 1/2 x 2 1/2
3 x 3
3 1/2 x 3 1/2
4 x 4
1.141.35
1.481.78
1.822.213.05
2.583.064.335.41
2.843.484.966.26
3.263.915.617.11
3.954.766.898.8110.5912.17
5.618.1710.5112.7014.71
6.469.4512.2114.8317.2721.63
.125
.188
.250
.313
.375
.500
.188
.250
.313
.375
.188
.250
.313
.375
.500
.188
.250
.313
.375
.500
.188
.250
.313
.375
.500
.250
.313
.375
.500
.250
.313
.375
.500
.100
.125
.100
.125
.100
.125
.188
.100
.125
.188
.250
.100
.125
.188
.250
.100
.125
.188
.250
.100
.125
.188
.250
.313
.375
.125
.188
.250
.313
.375
.125
.188
.250
.313
.375
.500
5 x 5
5 1/2 x 5 1/2
6 x 6
7 x 7
8 x 8
10 x 10
12 x 12
7.8012.0015.6219.0822.3728.43
13.2817.3221.1824.92
14.5619.0223.3327.4835.24
17.1322.4227.6332.5842.05
19.6325.8231.8437.6948.85
32.6340.3547.9062.46
39.4348.8658.1076.07
SQUARE STRUCTURAL TUBING (HSS)
26 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
2 x 1
2 1/2 x 1 1/2
3 x 1
3 x 1 1/2
3 x 2
3 x 2 1/2
3 1/2 x 2
3 1/2 x 2 1/2
4 x 2
4 x 3
1.822.213.35
2.583.064.335.41
2.583.064.335.41
2.923.484.96
3.263.915.617.118.60
6.25
6.25
4.766.898.8110.59
4.766.898.8110.59
5.618.1710.5112.7014.71
.125
.188
.250
.313
.375
.188
.250
.313
.375
.125
.188
.250
.313
.375
.125
.188
.250
.313
.375
.125
.188
.250
.313
.375
.125
.188
.250
.313
.375
.188
.250
.313
.375
.500
.125
.188
.100
.125
.188
.100
.125
.188
.250
.100
.125
.188
.250
.100
.125
.188
.100
.125
.188
.250
.313
.188
.188
.125
.188
.250
.313
.125
.188
.250
.313
.125
.188
.250
.313
.375
5 x 2
5 x 2 1/2
5 x 3
5 x 4
6 x 2
6 x 3
6 x 4
7 x 2
5.618.1710.5112.7014.71
8.8111.4013.8016.00
6.469.4512.2114.8317.27
7.3110.7013.9116.9619.82
6.469.4512.2114.8317.27
7.3110.7013.9116.9619.82
12.0015.6219.0822.3728.43
7.3110.70
RECTANGULAR STRUCTURAL TUBING (HSS)
O.D. (inches)
Weight(lbs per ft.)
Wall Thickness (inches)
Wall Thickness (inches)
O.D.(inches)
Weight(lbs per ft.)
BRUNSWICKSTEEL.COM [email protected] 27
7 x 2
7 x 3
7 x 4
7 x 5
8 x 2
8 x 3
8 x 4
8 x 6
9 x 5
13.9116.9619.82
12.0015.6219.0822.37
13.2817.3221.1824.92
14.5619.0223.3327.4835.24
12.0015.6219.0822.37
13.2817.3221.1824.92
14.5619.0223.3327.4835.24
17.1322.4227.6332.5842.05
17.1322.42
.313
.375
.500
.188
.250
.313
.375
.500
.188
.250
.313
.375
.500
.188
.250
.313
.375
.500
.250
.313
.375
.500
.250
.313
.375
.500
.250
.313
.375
.250
.313
.375
.188
.250
.313
.375
.188
.250
.313
.375
.188
.250
.313
.375
.500
.188
.250
.313
.375
.188
.250
.313
.375
.188
.250
.313
.375
.500
.188
.250
.313
.375
.500
.188
.250
9 x 5
9 x 7
10 x 4
10 x 6
12 x 8
14 x 6
14 x 10
27.6332.5842.05
19.6325.8231.8437.6948.85
17.1322.4227.6332.5842.05
19.6325.8231.8437.6948.85
32.6340.3547.9062.46
32.6340.3547.9062.46
39.4348.8658.1076.07
RECTANGULAR STRUCTURAL TUBING (HSS)
O.D. (inches)
Weight(lbs per ft.)
Wall Thickness (inches)
Wall Thickness (inches)
O.D.(inches)
Weight(lbs per ft.)
28 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
1/2 x 1/2
5/8 x 5/8
3/4 x 3/4
7/8 x 7/8
1 x 1
1 1/8 x 1 1/8
1 1/4 x 1 1/4
1 1/4 x 1 1/4
1 3/8 x 1 3/8
1 1/2 x 1 1/2
1 5/8 x 1 5/8
1 3/4 x 1 3/4
1 7/8 x 1 7/8
.028
.035
.049
.065
.028
.035
.049
.065
.083
.095
.035
.049
.065
.083
.095
.035
.049
.065
.083
.095
.109
.035
.049
.065
.083
.095
.109
.120
.035
.049
.065
.083
.095
.109
.120
.035
.049
.065
.083
.095
.109
.120
.134
.035
.049
.065
.083
.095
.109
.120
.134
.035
.049
.065
.083
.095
.109
.120
.134
.035
.049
.065
.083
.095
.109
.120
.134
.035
.049
.065
.083
.095
.109
.120
.134
.035
.049
.065
.083
.18
.22
.30
.39
.23
.31
.43
.56
.70
.79
.36
.50
.65
.81
.92
.38
.53
.69
.86
.981.11
.45
.63
.821.031.171.331.45
.50
.69
.911.151.301.471.61
.59
.821.081.37
1.551.771.932.13
.62
.861.131.421.621.842.012.22
.69
.961.261.591.812.062.252.49
.751.021.341.701.932.202.412.67
.781.091.431.812.062.352.572.95
.851.161.561.98
22201816
222018161413
2018161413
201816141312
20181614131211
20181614131211
20181614
13121110
2018161413121110
2018161413121110
2018161413121110
2018161413121110
20181614
Size Wall WallWeight (per ft.)
Weight (per ft.)
Ga. Ga.Size
SQUARE ERW TUBING
BRUNSWICKSTEEL.COM [email protected] 29
1 7/8 x 1 7/8
2 x 2
2 1/8 x 2 1/8
2 1/4 x 2 1/4
2 1/2 x 2 1/2
3 x 3
3 1/2 x 3 1/2
4 x 4
.095
.109
.120
.134
.049
.065
.083
.095
.109
.120
.134
.049
.065
.083
.095
.109
.120
.134
.049
.065
.083
.095
.109
.120
.134
.049
.065
.083
.095
.109
.120
.134
.065
.083
.095
.109
.120
.134
.148
.083
.095
.109
.120
.134
.148
.083
.095
.109
.120
.134
.148
2.252.572.813.11
1.281.692.142.442.783.053.39
1.341.772.252.562.923.213.56
1.411.862.362.693.073.383.74
1.542.042.592.953.373.694.10
2.593.293.754.284.705.225.74
3.844.395.015.506.126.73
4.415.035.756.317.037.73
13121110
18161413121110
18161413121110
18161413121110
18161413121110
1614131211109
14131211109
14131211109
Size Wall WallWeight (per ft.)
Weight (per ft.)
Ga. Ga.Size
SQUARE ERW TUBING
30 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
RECTANGULAR ERW TUBING
1/2 x 1
1/2 x 1 1/2
3/4 x 1 1/2
3/4 x 1 3/4
1 x 1 1/2
1 x 2
1 1/4 x 2
1 1/2 x 2 1/2
1 1/2 x 3
.049
.065
.049
.065
.083
.065
.065
.065
.083
.049
.065
.083
.095
.065
.083
.065
.083
.47
.61
.63
.831.04
.94
1.05
1.051.32
.971.271.601.74
1.38
2.16
1.932.45
1816
181614
16
16
1614
18161413
16
14
1614
Size Wall Weight (per ft.)
Ga.
BRUNSWICKSTEEL.COM [email protected] 31
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
0.250
0.313
0.375
0.500
0.563
0.625
0.688
0.1940.1800.152
0.2570.2430.2150.183
0.3190.3050.2770.2450.2090.135
0.4440.4300.4020.3840.3700.3340.2820.260
0.4930.4330.3970.323
0.5550.5270.5090.4950.4590.4070.3850.3570.3130.249
0.5580.5220.4980.470
XXX
XXXX
XXXXXX
XXXXXXXX
XXXX
XXXXXXXXXX
XXXX
0.0280.0350.049
0.0280.0350.0490.065
0.0280.0350.0490.0650.0830.120
0.0280.0350.0490.0580.0650.0830.1090.120
0.0350.0650.0830.120
0.0350.0490.0580.0650.0830.1090.1200.1340.1560.188
0.0650.0830.0950.109
0.0660.0800.105
0.0850.1040.1380.172
0.1040.1270.1710.2150.2590.327
0.1410.1740.2360.2740.3020.3700.4550.487
0.1970.3460.4250.568
0.2210.3010.3510.3890.4800.6010.6470.7030.7810.877
0.4320.5360.6020.674
XX
X
XX
XX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
32 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
0.688
0.750
0.813
0.875
1.000
0.448
0.6800.6520.6200.5840.5600.5320.5100.4820.4380.3740.3120.250
0.6830.6470.6230.5730.545
0.8050.7770.7590.7450.7090.6850.6570.6350.6070.5630.4990.3750.249
0.9300.9020.8700.8340.8100.7820.7600.7320.6880.624
X
XXXXXXXXXXXX
XXXXX
XXXXXXXXXXXXX
XXXXXXXXXX
0.120
0.0350.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.250
0.0650.0830.0950.1200.134
0.0350.0490.0580.0650.0830.0950.1090.1200.1340.1560.1880.2500.313
0.0350.0490.0650.0830.0950.1090.1200.1340.1560.188
0.728
0.2670.3670.4760.5910.6650.7460.8070.8820.9901.1281.2421.335
0.5190.6470.7280.8880.972
0.3140.4320.5060.5620.7020.7910.8920.9681.0601.1981.3791.6691.879
0.3610.4980.6490.8130.9181.0371.1281.2391.4061.630
XXXXX
X
X
XXX
XXXXXXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 33
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
1.000
1.065
1.125
1.188
1.250
0.5620.5000.3740.250
0.8990.8750.8470.8250.7530.6890.565
1.0551.0270.9950.9590.9350.9070.8850.8570.8130.7490.6870.6250.5630.499
1.0580.9480.8760.8120.7500.688
1.1801.1521.1201.0841.0601.0321.0100.9820.9380.874
XXX
XXXXXXX
XXXXXXXXXXXXXX
XXXXXX
XXXXXXXXX
0.2190.2500.3130.375
0.0830.0950.1090.1200.1560.1880.250
0.0350.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.2810.313
0.0650.1200.1560.1880.2190.250
0.0350.0490.0650.0830.0950.1090.1200.1340.1560.188
1.8272.0032.2972.503
0.8700.9841.1131.2111.5141.7612.176
0.4070.5630.7360.9241.0451.1831.2881.4181.6141.8812.1192.3362.5332.714
0.7801.3691.7192.0082.2662.504
0.4540.6290.8231.0341.1721.3281.4481.5971.8232.132
XXXX
X
XXXXXXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
34 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
1.250
1.313
1.375
1.438
1.500
0.8120.7500.6240.500
1.0731.0451.0010.9370.8750.8130.6870.563
1.2771.2451.2091.1851.1571.1351.1071.0630.9990.9370.8750.8130.7490.625
1.1261.0621.0000.938
1.4301.4021.3701.3341.3101.2821.2601.2321.1881.1241.062
XXXX
XXXXXXXX
XXXXXXXXXXXXXX
XXXX
XXXXXXXXXXX
0.2190.2500.3130.375
0.1200.1340.1560.1880.2190.2500.3130.375
0.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.2810.3130.375
0.1560.1880.2190.250
0.0350.0490.0650.0830.0950.1090.1200.1340.1560.1880.219
2.4112.6703.1323.504
1.5291.6871.9282.2592.5592.8383.3433.757
0.6940.9091.1451.2991.4741.6081.7762.0312.3832.7043.0043.2833.5504.005
2.1362.5102.8513.172
0.5480.7590.9961.2561.4261.6191.7691.9552.2392.6342.996
XXXX
X
XXXXXXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 35
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
1.500
1.563
1.625
1.750
1.875
1.0000.9380.8740.7500.6240.500
1.3231.2511.0630.813
1.5271.4951.4591.4351.4071.3851.3571.3131.2491.1871.1251.0630.9990.8750.625
1.6521.6201.5841.5601.5321.5101.4821.4381.3741.3121.2501.1241.0000.750
1.7771.745
XXXX
XXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXX
XX
0.2500.2810.3130.3750.4380.500
0.1200.1560.2500.375
0.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.2810.3130.3750.500
0.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.3130.3750.500
0.0490.065
3.3383.6583.9684.5064.9685.340
1.8492.3443.5064.758
0.8251.0831.3671.5221.7651.9292.1342.4472.8853.2893.6714.0334.3865.0066.008
0.8901.1701.4781.6791.9102.0892.3132.6563.1363.5814.0054.8045.5076.675
0.9561.257
XXXXXX
XXXX
X
XX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
36 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
1.875
2.000
2.125
1.7091.6851.6571.6351.5631.4991.4371.3751.3131.2491.1250.9990.875
1.9301.9021.8701.8341.8101.7821.7601.7321.6881.6241.5621.5001.4381.3741.2501.1241.0000.8740.7500.500
2.0271.9951.9591.9351.8851.8131.7491.6871.6251.563
XXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXX
0.0830.0950.1090.1200.1560.1880.2190.2500.2810.3130.3750.4380.500
0.0350.0490.0650.0830.0950.1090.1200.1340.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.750
0.0490.0650.0830.0950.1200.1560.1880.2190.2500.281
1.5891.8062.0562.2492.8643.3873.8734.3394.7845.2226.0086.7227.343
0.7351.0211.3431.6991.9332.2012.4092.6703.0723.6384.1664.6735.1595.6396.5087.3078.0108.6409.17810.013
1.0861.4301.8102.0602.5703.2813.8894.4585.0065.534
XX
XXXXXXX
XX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 37
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
2.125
2.250
2.375
2.500
1.4991.3751.125
2.1522.1202.0842.0602.0101.9821.9381.8741.8121.7501.6881.6241.5001.3741.2501.1241.0000.750
2.2452.2092.1572.1352.0631.9991.9371.8751.7491.6251.3751.1250.875
2.3702.3342.3102.2822.2602.1882.1242.062
XXX
XXXXXXXXXXXXXX
XXXXXXXX
XXXXXXXX
0.3130.3750.500
0.0490.0650.0830.0950.1200.1340.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.750
0.0650.0830.1090.1200.1560.1880.2190.2500.3130.3750.5000.6250.750
0.0650.0830.0950.1090.1200.1560.1880.219
6.0577.0098.678
1.1521.5171.9212.1862.7303.0283.4894.1404.7505.3405.9096.4757.5098.4769.34510.14410.84712.015
1.6042.0322.6382.8903.6974.3915.0435.6746.8938.01010.01311.68113.016
1.6902.1432.4402.7833.0503.9054.6425.335
XX
X
XXXX
XXX
X
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
38 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
2.500
2.625
2.750
2.875
2.0001.9381.8741.7501.6241.5001.3741.2501.000
2.4952.4352.3852.2492.1251.9991.8751.7491.6251.3751.125
2.6202.5842.5602.5102.4382.3742.3122.2502.1882.1242.0001.8741.7501.6241.5001.2501.000
2.7452.6352.4992.4372.375
XXXXXXX
XXXXXXXXX
XXXXXXXXXXXXXXX
XXXX
0.2500.2810.3130.3750.4380.5000.5630.6250.750
0.0650.0950.1200.1880.2500.3130.3750.4380.5000.6250.750
0.0650.0830.0950.1200.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.7500.875
0.0650.1200.1880.2190.250
6.0086.6597.3118.5119.64610.68011.64712.51614.018
1.7772.5673.2104.8936.3417.7299.01110.23011.34813.35015.019
1.8642.3642.6943.3714.3225.1445.9206.6757.4108.1479.51210.81512.01513.15014.18416.02017.522
1.9513.5315.3956.2127.009
X
XX
X
XX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 39
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
2.875
3.000
3.125
3.250
2.2492.1251.9991.8751.7491.625
2.9022.8702.8342.8102.7602.6882.6242.5622.5002.4382.3742.2502.1242.0001.8741.7501.5001.2501.000
2.8852.7492.6252.4992.3752.2492.1251.9991.8751.6251.375
3.1203.0843.0603.0102.9382.874
XXXXXX
XXXXXXXXXXXXXXX
XXXXXXXXXX
XXXXXX
0.3130.3750.4380.5000.5630.625
0.0490.0650.0830.0950.1200.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.7500.8751.000
0.1200.1880.2500.3130.3750.4380.5000.5630.6250.7500.875
0.0650.0830.0950.1200.1560.188
8.56410.01311.40012.68313.90215.019
1.5442.0372.5862.9473.6914.7385.6466.5057.3438.1608.98210.51311.98513.35014.65315.85318.02319.85821.360
3.8515.8977.6769.40011.01412.56914.01815.40516.88819.02421.026
2.2112.8073.2014.0115.1556.148
XXXXX
XXXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
40 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
3.250
3.500
3.625
3.750
2.7502.6882.6242.5002.3742.2502.1242.0001.7501.5001.250
3.3703.3343.3103.2603.1883.1243.0623.0002.9382.8742.7502.6242.5002.3742.2502.0001.7501.500
3.3853.2493.1252.9992.8752.7492.6252.3752.125
3.5103.3743.2503.124
XXXXXXXX
XXXXXXXXXXXXXXXXXX
XXXXXXXX
XXXX
0.2500.2810.3130.3750.4380.5000.5630.6250.7500.8751.000
0.0650.0830.0950.1200.1560.1880.2190.2500.2810.3130.3750.4380.5000.5630.6250.7500.8751.000
0.1200.1880.2500.3130.3750.4380.5000.6250.750
0.1200.1880.2500.313
8.0108.9109.81811.51413.15414.68516.15717.52220.02522.19424.030
2.3853.0293.4554.3325.5716.6507.6748.6789.66010.65412.51614.32416.02017.66019.19122.02824.53126.700
4.4926.9019.01111.07113.01614.90816.68820.02523.029
4.6527.1529.34511.489
XXXX
X
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 41
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
3.750
3.875
4.000
4.125
4.250
3.0002.8742.7502.6242.5002.2502.0001.750
3.6353.4993.3753.1252.8752.6252.375
3.8703.8343.8103.7603.6243.5623.5003.3743.2503.1243.0002.8742.7502.5002.2502.0001.7501.500
3.6253.4993.3753.1252.875
4.1204.0604.010
XXXXX
XXXXXX
XXXXXXXXXXXXX
XXXXX
XXX
0.3750.4380.5000.5630.6250.7500.8751.000
0.1200.1880.2500.3750.5000.6250.750
0.0650.0830.0950.1200.1880.2190.2500.3130.3750.4380.5000.5630.6250.7500.8751.0001.1251.250
0.2500.3130.3750.5000.625
0.0650.0950.120
13.51715.49317.35519.16320.85924.03026.86729.370
4.8127.4039.67914.01818.02321.69425.031
2.7323.4723.9624.9737.6548.84310.01312.32514.51816.66218.69020.66622.52826.03329.20332.04034.54336.713
10.34612.74315.01919.35823.363
2.9054.2165.293
XXXX
XXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
42 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
4.250
4.500
4.625
4.750
3.8743.7503.6243.5003.3743.2503.0002.7502.5002.2502.0001.750
4.3704.3344.3104.2604.2324.1244.0624.0003.8743.7503.6243.5003.2503.0002.7502.5002.2502.0001.500
4.1253.9993.8753.625
4.5104.3744.2504.1244.0003.7503.500
XXXXXXX
XXXXXXXXXXXXX
XXXX
XXXXXXX
0.1880.2500.3130.3750.4380.5000.6250.7500.8751.0001.1251.250
0.0650.0830.0950.1200.1340.1880.2190.2500.3130.3750.4380.5000.6250.7500.8751.0001.1251.2501.500
0.2500.3130.3750.500
0.1200.1880.2500.3130.3750.5000.625
8.15610.68013.16115.51917.83220.02524.19728.03531.53934.71037.54740.050
3.0793.9154.4695.6136.2488.65810.01311.34813.99616.52119.00121.36025.86630.03833.87637.38040.55143.38848.060
11.68114.41417.02122.028
5.9349.16012.01514.83217.52222.69527.534
XXXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 43
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
4.750
5.000
5.250
5.500
3.2503.0002.7502.2501.750
4.8704.8344.7604.6244.5004.3744.2504.1244.0003.7503.5003.2503.0002.7502.5002.000
5.0104.8744.7504.6244.5004.2504.0003.7503.5003.2503.0002.7502.250
5.3705.3345.2605.1245.0004.8744.7504.624
XXXXXXXXXX
XXXXXXX
X
XXXXXX
0.7500.8751.0001.2501.500
0.0650.0830.1200.1880.2500.3130.3750.4380.5000.6250.7500.8751.0001.1251.2501.500
0.1200.1880.2500.3130.3750.5000.6250.7500.8751.0001.1251.2501.500
0.0650.0830.1200.1880.2500.3130.3750.438
32.04036.21240.05046.72552.065
3.4264.3596.2549.66212.68315.66818.52321.34024.03029.20334.04338.54842.72046.55850.06356.070
6.57510.16413.35016.50419.52425.36530.87236.04540.88445.39049.56253.40060.075
3.7734.8026.89510.66614.01817.33920.52623.679
XXX
XXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
44 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
5.500
5.750
6.000
6.250
4.5004.2504.0003.7503.5003.2503.0002.500
5.3745.2505.1245.0004.7504.5004.2504.0003.7503.2502.750
5.8705.8345.7825.7605.7325.6245.5005.3745.2505.0004.7504.5004.2504.0003.7503.5003.0002.5002.000
6.0105.8745.7505.500
XX
XXXXXX
XX
X XXXXXX
XXXX
0.5000.6250.7500.8751.0001.1251.2501.500
0.1880.2500.3130.3750.5000.6250.7500.8751.0001.2501.500
0.0650.0830.1090.1200.1340.1880.2500.3130.3750.5000.6250.7500.8751.0001.1251.2501.5001.7502.000
0.1200.1880.2500.375
26.70032.54138.04843.22148.06052.56656.73864.080
11.16814.68518.17521.52728.03534.20940.05045.55750.73060.07568.085
4.1205.2456.8587.5368.39511.67015.35319.01122.52829.37035.87842.05347.89353.40058.57363.41372.09079.43385.440
7.85612.17216.02023.529
XXXXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 45
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
6.250
6.500
6.625
6.750
7.000
5.2505.0004.7504.5004.2504.0003.7503.250
6.1246.0005.7505.5005.2505.0004.7504.5004.0003.5003.0002.500
6.4076.3856.3575.999
6.2506.0005.7505.5005.2505.0004.7504.2503.750
6.8706.8346.7826.7606.7326.6246.5006.250
XX
XXXXX
X
XXXX
X
XXX
0.5000.6250.7500.8751.0001.1251.2501.500
0.1880.2500.3750.5000.6250.7500.8751.0001.2501.5001.7502.000
0.1090.1200.1340.313
0.2500.3750.5000.6250.7500.8751.0001.2501.500
0.0650.0830.1090.1200.1340.1880.2500.375
30.70537.54744.05550.22956.07061.57766.75076.095
12.67316.68824.53132.04039.21646.05852.56658.74070.08880.10088.77896.120
7.5858.3379.28921.100
17.35525.53233.37540.88448.06054.90261.41073.42584.105
4.8146.1328.0228.8179.82613.67718.02326.533
XXX
XXXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
46 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
7.000
7.250
7.500
7.750
8.000
6.0005.7505.5005.2505.0004.7504.5004.0003.5003.000
6.7506.5006.2506.0005.7505.2505.0004.7504.250
7.1247.0006.7506.5006.2506.0005.5005.0004.5004.0003.500
7.3747.2507.0006.7506.5006.2505.7505.2504.750
7.8707.834
XXX
XXXXXX
XXXXXXX
XXXXX
0.5000.6250.7500.8751.0001.1251.2501.5001.7502.000
0.2500.3750.5000.6250.7501.0001.1251.2501.500
0.1880.2500.3750.5000.6250.7501.0001.2501.5001.7502.000
0.1880.2500.3750.5000.6250.7501.0001.2501.500
0.0650.083
34.71042.55350.06357.23864.08070.58876.76388.11098.123106.800
18.69027.53436.04544.22252.06566.75073.59280.10092.115
14.68119.35828.53637.38045.89154.06869.42083.43896.120107.468117.480
15.18320.02529.53738.71547.55956.07072.09086.775100.125
5.5087.018
XX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 47
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
8.000
8.250
8.500
8.750
7.7827.7607.7327.6247.5007.2507.0006.7506.5006.2506.0005.7505.5005.0004.5004.0003.5003.000
7.7507.5007.2507.0006.7506.2506.0005.7505.250
8.0007.7507.5007.2507.0006.5006.0005.5005.0004.5003.500
8.0007.7507.2506.750
XXXXX
XXXXXX
XXXX
XXX
0.1090.1200.1340.1880.2500.3750.5000.6250.7500.8751.0001.1251.2501.5001.7502.0002.2502.500
0.2500.3750.5000.6250.7501.0001.1251.2501.500
0.2500.3750.5000.6250.7501.0001.2501.5001.7502.0002.500
0.3750.5000.7501.000
9.18610.09911.25715.68520.69330.53840.05049.22858.07366.58374.76082.60390.113104.130116.813128.160138.173146.850
21.36031.53941.38550.89760.07577.43085.60793.450108.135
22.02832.54142.72052.56662.07880.10096.788112.140126.158138.840160.200
33.54244.05564.08082.770
XXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
48 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
8.750
9.000
9.250
9.500
9.750
10.000
6.2505.7504.750
8.5008.2508.0007.7507.5007.0006.5006.0005.5005.0004.5004.0003.000
8.7508.5008.2508.0007.7507.2506.7506.250
9.0008.7508.5008.0007.5007.0006.5006.0005.500
9.2508.7508.2507.7507.2506.750
9.834
XXX
XXXX
XXX
XX
1.2501.5002.000
0.2500.3750.5000.6250.7501.0001.2501.5001.7502.0002.2502.5003.000
0.2500.3750.5000.6250.7501.0001.2501.500
0.2500.3750.5000.7501.0001.2501.5001.7502.000
0.2500.5000.7501.0001.2501.500
0.083
100.125116.145144.180
23.36334.54345.39055.90366.08385.440103.463120.150135.503149.520162.203173.550192.240
24.03035.54446.72557.57268.08588.110106.800124.155
24.69836.54648.06070.08890.780110.138128.160144.848160.200
25.36549.39572.09093.450113.475132.165
8.791 X
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
BRUNSWICKSTEEL.COM [email protected] 49
MECHANICAL TUBING (SEAMLESS, DOM, ERW)
10.000
10.250
10.500
10.750
9.7829.7609.7329.6249.5009.2509.0008.5008.0007.7507.5007.0006.5006.0005.5005.0004.000
9.2508.7508.2507.7507.250
10.0009.7509.5009.0008.5008.0007.5007.0006.5005.5004.500
10.25010.0009.7509.2508.7508.2507.7507.2506.7506.2505.750
XXXX
X
XXX
XX
0.1090.1200.1340.1880.2500.3750.5000.7501.0001.1251.2501.5001.7502.0002.2502.5003.000
0.5000.7501.0001.2501.500
0.2500.3750.5000.7501.0001.2501.5001.7502.0002.5003.000
0.2500.3750.5000.7501.0001.2501.5001.7502.0002.2502.500
11.51412.66214.11919.70126.03338.54850.73074.09396.120106.633116.813136.170154.193170.880186.233200.250224.280
52.06576.09598.790120.150140.175
27.36840.55153.40078.098101.460123.488144.180163.538181.560213.600240.300
28.03541.55254.73580.100104.130126.825148.185168.210186.900204.255220.275
XXX
Outside Diameter (O.D.)
Inside Diameter (I.D.) DOMWall Thickness (inches)
Weight(per ft.)
ERW
50 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
STANDARD PIPE
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
4 1/2
5
6
7
8
.035.1383
.049.2570
.049.3276
.065.5358
.065.6838
.065.8678
.0651.107
.0651.274
.0651.604
.0832.475
.0833.029
.0833.472
.0833.915
.1096.349
.1097.585
.1099.914
.25022.36
.068.2447
.088.4248
.091.5656
.109.8510
.1131.131
.1331.679
.1402.273
.1452.718
.1543.653
.2035.793
.2167.576
.2269.109
.23710.79
.24712.53
.25814.62
.28018.97
.30123.57
.32228.55
.405
.540
.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.000
5.563
6.625
7.625
8.625
.049.1863
.065.3297
.065.4235
.083.6710
.083.8572
.1091.404
.1091.806
.1092.085
.1092.638
.1203.531
.1204.332
.1204.973
.1205.631
.1347.770
.1349.289
.14813.40
.068.2447
.088.4248
.091.5656
.109.8510
.1131.131
.1331.679
.1402.273
.1452.718
.1543.653
.2035.793
.2167.576
.2269.109
.237
10.79
.25814.62
.28018.97
.32228.55
.27724.70
.28112.22
.40635.64
PipeSize
5 20 STDO.D.(inches)
10 4030 60
Black = Wall ThicknessOrange = Lbs per lineal ft.
LEGEND
BRUNSWICKSTEEL.COM [email protected] 51
STANDARD PIPE
9
10
11
12
14
16
18
20
22
24
26
28
30
32
34
36
42
48
.13415.19
.16522.18
.25028.04
.25033.38
.31245.68
.31252.36
.31259.03
.37578.60
.37586.61
.37594.62
.500136.20
.500146.80
.500157.50
.500168.2
.500178.90
.500189.60
.34233.90
.36540.48
.37545.55
.37549.56
.37554.57
.37562.58
.37570.59
.37578.60
.37586.61
.37594.62
.375102.60
.375110.60
.375118.60
.375126.70
.375137.70
.375142.70
.375166.70
.375190.70
9.625
10.75
11.75
12.750
14
16
18
20
22
24
26
28
30
32
34
36
42
48
.16518.70
.18024.20
.25036.71
.25042.05
.25047.39
.250
52.73
.25058.07
.25063.41
.31285.60
.31292.26
.312
98.93
.312105.60
.344123.70
.312118.90
.36540.48
.40653.53
.437
63.37
.50082.77
.562
104.80
.593122.90
.687171.20
.688230.10
.688244.80
.750282.30
.30734.24
.33043.77
.37554.57
.37562.58
.43782.06
.500104.10
.500114.80
.562140.80
.625182.70
.625196.10
.625209.40
.625222.80
.625236.10
.50054.74
.56273.16
.59384.91
.656107.50
.750138.20
.812166.40
.875197.40
.968238.10
PipeSize
5 20 STDO.D.(inches)
10 4030 60
Black = Wall Thickness Orange = Lbs per lineal ft.
LEGEND
52 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
EXTRA HEAVY PIPE
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
4 1/2
5
6
7
8
.095.3145
.119.5351
.126.7388
.1471.088
.1541.474
.1792.172
.1912.997
.2003.631
.2185.022
.2767.662
.30010.25
.31812.51
.33714.98
.37520.78
.43228.57
.50043.39
.59350.87
.1871.034
.2181.937
.2502.844
.2503.765
.2814.859
.3437.444
.37510.01
.43714.32
.53122.51
.62532.96
.71845.30
.90674.69
.405
.540
.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.000
5.563
6.625
7.625
8.625
.095.3145
.119.5351
.126.7388
.1471.088
.1541.474
.1792.172
.1912.997
.2003.631
.2185.022
.2767.662
.30010.25
.31812.51
.33714.98
.35517.61
.37520.78
.432
28.57
.50038.05
.50043.39
.81267.76
.43719.01
.50027.04
.56239.39
.71860.63
.2941.714
.3082.441
.3583.659
.3825.214
.4006.408
.4369.029
.55213.70
.60018.58
.63622.85
.67427.54
.71032.53
.75038.55
.86453.16
.87563.08
.87572.42
PipeSize
80 100 160O.D.(inches)
XH 140120 XXH
Black = Wall ThicknessOrange = Lbs per lineal ft.
LEGEND
BRUNSWICKSTEEL.COM [email protected] 53
EXTRA HEAVY PIPE
9
10
11
12
14
16
18
20
22
24
26
28
30
32
34
36
42
48
.59364.33
.68788.51
.750106.10
.843136.50
.937170.80
1.031208.90
1.125250.80
1.218296.40
.71876.93
.843107.20
.937130.70
1.031164.80
1.156208.00
1.280256.10
1.375302.90
1.531367.40
1.125115.70
1.312160.30
1.406189.10
1.593245.10
1.781308.50
1.968379.00
2.125451.10
2.343541.90
9.625
10.75
11.75
12.750
14
16
18
20
22
24
26
28
30
32
34
36
42
48
.50048.72
.50054.74
.50060.07
.50065.42
.50072.09
.50082.77
.50093.45
.500104.10
.500114.80
.500125.50
.500136.20
.500146.80
.500157.50
.500168.20
.500178.90
.500189.60
.500221.60
.500253.50
1.000104.10
1.125139.70
1.250170.20
1.437223.50
1.562274.20
1.750341.10
1.875403.0
2.062483.10
.84389.20
1.000125.50
1.093150.70
1.218192.30
1.375244.10
1.500296.40
1.625353.60
1.812429.40
PipeSize
80 100 160O.D.(inches)
XH 140120 XXH
Black = Wall ThicknessOrange = Lbs per lineal ft.
LEGEND
54 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
1/4
3/16
7 ga.
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
10.210
7.657
7.500
6.875
6.250
5.625
5.000
4.375
3.750
3.125
2.812
2.500
2.250
2.000
1.750
1.500
1.375
1.250
1.125
1.000
.875
.750
.688
.625
.562
.500
-
-
-
-
-
.006
.006
.006
.005
.005
.005
.005
.004
.004
.004
.003
.003
.003
.003
.003
.003
.002
.002
.002
.002
.001
.250
.188
.179
.164
.149
.134
.119
.104
.089
.074
.067
.059
.053
.048
.041
.036
.033
.030
.027
.024
.021
.018
.016
.015
.014
.012
.012
.009
.008
.008
.008
.008
.008
.008
.007
.007
.006
.006
-
-
-
-
-
-
-
-
-
-
-
-
-
-
HOT AND COLD ROLLED SHEET
Ga. No. Lbs per Sq. Ft.Dec. Equiv.
A.I.S.I. Tol.
H.R. & H.R. P&O
(plus or minus)
C.R.
BRUNSWICKSTEEL.COM [email protected] 55
STEEL PLATE WEIGHT CHART
3/167/321/49/325/1611/323/813/327/1615/321/29/165/811/163/413/167/815/16
11 1/161 1/81 3/161 1/41 5/161 3/81 7/161 1/21 5/81 3/41 7/8
22 1/82 1/42 3/82 1/22 5/82 3/42 7/8
33 1/83 1/43 3/83 1/2
7.668.9310.2111.4912.7614.0415.3116.5917.8719.1420.4222.9725.5228.0830.6333.1835.7338.29
40.8443.3945.9448.5051.0553.6056.1558.7161.2666.3671.4776.57
81.6886.7891.8996.99102.10107.20112.31117.41
122.52127.62132.72137.83142.93
3.6253.753.875
4.4.1254.254.3754.54.6254.754.875
5.5.1255.255.3755.55.6255.755.875
6.6.1256.256.3756.56.6256.756.875
7.7.1257.257.3757.57.6257.757.875
8.8.5
9.
10.
148.04153.14158.25
163.35168.46173.56178.67183.77188.88193.98199.09
204.19209.30214.40219.51224.61229.72234.82239.93
245.03250.14255.24260.34265.45270.55275.66280.76
285.87290.97296.08301.18306.29311.39316.50321.60
326.71347.13
367.55
408.38
.1875
.21875
.25
.28125
.3125
.34375
.375
.40625
.4375
.46875
.5
.5625
.625
.6875
.75
.8125
.875
.9375
1.1.06251.1251.18751.251.31251.3751.43751.51.6251.751.875
2.2.1252.252.3752.52.6252.752.875
3.3.1253.253.3753.5
3 5/83 3/43 7/8
44 1/84 1/44 3/84 1/24 5/84 3/44 7/8
55 1/85 1/45 3/85 1/25 5/85 3/45 7/8
66 1/86 1/46 3/86 1/26 5/86 3/46 7/8
77 1/87 1/47 3/87 1/27 5/87 3/47 7/8
88 1/2
9
10
Thickness
(fractions)
TheoreticalWeight
(lbs per sq. ft.)
(inches)
(decimal)
Thickness
(fractions)
(inches)
(decimal)
TheoreticalWeight
(lbs per sq. ft.)
56 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
CHECKER PLATE
This tough, rolled steel floor plate with raised lug pattern provides plenty of traction for feet and wheels. The attractive design permits free drainage and easy maintenance since there are no pockets to collect dirt and grease and no pores to absorb liquids. Easy to fabricate and install.
16Ga x
14Ga x
12Ga x
1/8 x
3/16 x
1/4 x
5/16 x
3/8 x
1/2 x
5/8 x
3/4 x
1 x
3.00
3.75
5.25
6.16
8.71
11.26
13.81
16.37
21.47
26.58
31.68
41.89
Normal Gauge or Size
(inches)1
Normal Gauge or Size
(inches)1
Weight
(lbs per sq. ft.)
Weight
(lbs per sq. ft.)
1 Thickness exclusive of projecting lugs.
BRUNSWICKSTEEL.COM [email protected] 57
GALVANIZED SHEET
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
7.031
6.406
5.781
5.156
4.531
3.906
3.281
2.969
2.656
2.406
2.156
1.906
1.656
1.531
1.406
1.281
1.156
1.031
.906
.844
.781
.719
.656
.168
.153
.138
.123
.108
.093
.078
.071
.063
.057
.051
.045
.039
.036
.033
.030
.027
.024
.021
.020
.018
.017
.015
.009
.009
.009
.009
.009
.008
.008
.006
.006
.005
.005
.005
.004
.004
.004
.004
.004
.004
.003
.003
.003
.003
.003
Ga. No. Dec. Equiv. Lbs (per sq. ft.)
A.I.S.I. Tol.(plus or minus)
58 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
Gauge Range(franctions of an inch)
Thickness(decimals of an inch)
Theo. Weight(lbs per sq. ft.)Chroe Nichel Allowsy
262524232221201918171615141312111098
7
.0178 to .0198
.0199 to .023
.024 to .026
.027 to .029
.030 to .032
.033 to .035
.036 to .040
.041 to .046
.047 to .052
.053 to .058
.059 to .065
.066 to .072
.073 to .083
.084 to .098
.099 to .114
.115 to .130
.131 to .145
.146 to .160
.161 to .176
3/161/45/1611/323/813/327/1615/321/29/165/811/163/413/167/815/1611 1/81 1/41 3/81 1/23 3/422 1/23
.01875
.021875
.025
.028125
.03125
.034375
.0375
.04375
.050
.05625
.0625
.0703125
.078125
.09375
.109375
.125
.140625
.1562
.171875
.1875
.2500
.3125
.34375
.3750
.40625
.4375
.46875
.5000
.5625
.6250
.6875
.7500
.8125
.8750
.93751.0001.1251.2501.3751.5001.7502.0002.5003.000
.7632
.91871.0201.18131.271.44371.531.83752.042.36252.552.95313.183.93754.465.25005.90626.56257.2187
8.57911.16213.74615.62116.49618.28820.07920.87121.66324.24726.83129.47732.12334.70737.29140.97842.66547.90353.22658.54963.87174.51685.161106.452127.742
STAINLESS STEEL SHEET AND PLATE
BRUNSWICKSTEEL.COM [email protected] 59
Thickness(inches)
Thickness(inches)
Weight(lbs per sq. ft.)
Weight(lbs per sq. ft.)
.016
.020
.025
.032
.040
.051
.064
.081
.091
.125
.18751/45/163/81/25/83/41
1/16
1/8
3/16
1/4
3/8
1/2
0.2240.2820.3520.4540.5630.7180.9011.1411.2821.7622.6413.5214.4095.2917.0488.82010.58013.824
1.20
1.90
2.80
3.70
5.50
7.30
ALUMINUM SHEET AND PLATE
ALUMINUM TREAD PLATE
Raised four-way Diamond Pattern - has an approximate 1” centre - opposite side is smooth.
Thickness is measured exclusive of projections.
60 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
Pitc
h C
. to
C. o
f B
on
d
LWO
LWDPitch C. to C. of Bond
SWD SWO
STRAND WIDTH
STRAND THICKNESS
LWDPitch C. to C. of Bond
Pitc
h C
. to
C. o
f B
on
d
SWD SWO
METAL THICKNESS
EXPANDED METAL
STANDARD RAISED EXPANDED METAL is a finished steel product as it comes from the press after having been die cut and expanded. The illusration shows that the strands and bonds form a sharp angle to the original plane of the solid sheet.
FLATTENED EXPANDED METAL is a raised expanded metal which has been cold rolled, leaving a flat, smooth surface. The length of the sheet is elongated usuallly by 5% while the width stays the same.
BRUNSWICKSTEEL.COM [email protected] 61
STANDARD RAISED EXPANDED METAL
3/16-223/16-201/4-201/4-18
5/16-181/2-201/2-181/2-161/2-13
1/2-13(188)3/4-163/4-13
3/4-10 (13 Ga.)3/4-9 (10 Ga.)
1-161-141-121-10
1-10H1-7
11/2-1811/2-1611/2-1411/2-1311/2-12
11/2-10L (13 Ga.)11/2-10
11/2-10H11/2-9 (10 Ga.)
11/2-62-102-9
Style No.
(use this numberfor ordering)
627586
114104437086
1472825480
1201804476
101170200412204044607279
1702001202506890
Weight
(per 100 sq. ft.)
.200
.200
.255
.255
.333
.500
.500
.500
.500
.500
.923
.923
.923
.9231.0901.0901.0901.0901.0901.0901.3301.3301.3301.3301.3301.3301.3301.3301.3301.3301.8501.850
Centre to CenA
SWD
.166
.166
.172
.172
.188
.438
.438
.375
.313
.250
.813
.750
.750
.6881.000.875.907.750.725.576
1.3131.2501.1881.1881.1121.1881.000.8301.1251.0001.6251.563
Size of O
CSWD
.030
.036
.036
.048
.048
.036
.048
.060
.092
.092
.060
.092
.092
.134
.060
.075
.105
.135
.135
.183
.048
.060
.075
.092
.105
.092
.135
.135
.135
.198
.092
.134
Str
EThick.
.050
.050
.073
.073
.094
.072
.088
.086
.096
.188
.099
.096
.144
.148
.096
.122
.109
.155
.180
.275
.067
.107
.097
.104
.109
.137
.200
.240
.142
.201
.164
.149
and
FWidth
.500
.5001.0001.0001.0001.2001.2001.2001.2001.2002.0002.0002.0002.0002.4002.4002.4002.4002.4002.4003.0003.0003.0003.0003.0003.0003.0003.0003.0003.0004.0004.000
ter of BridgesB
LWD
.437
.437
.719
.719
.688
.938
.938
.938
.938
.8001.7501.6881.6251.5632.0631.5631.5631.5631.5631.5632.6252.6252.6252.5002.3752.5002.3752.3752.3752.3133.4383.375
penings
DLWD
ALL WEIGHTS AND DIMENSIONS SHOWN ABOVE ARE APPROXIMATESpecial size sheets can be produced to order.
62 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
FLATTENED EXPANDED METAL
3/16-22F3/16-20F1/4-20F1/4-18F
5/16-18F1/2-20F1/2-18F1/2-16F1/2-13F3/4-16F3/4-14F3/4-13F
3/4-10F (13 Ga.)3/4-9F (10 Ga.)
1-16F1-14F1-12F1-10F
11/2-16F11/2-14F11/2-13F11/2-12F11/2-10F
11/2-9F (10 Ga.)
Style No.
(use this numberfor ordering)
607283
11195406682
140516375
114171417396
16538465766
165111
Weight
(per 100 sq. ft.)
.200
.200
.255
.255
.333
.500
.500
.500
.500
.923
.923
.923
.923
.9231.0901.0901.0901.0901.3301.3301.3301.3301.3301.330
Centre to CenA
SWD
.085
.085
.094
.094
.172
.375
.281
.250
.250
.750
.688
.688
.637
.563
.875
.790
.785
.7501.0631.0631.0631.2960.9001.000
Size of O
CSWD
.024
.029
.030
.040
.040
.029
.039
.050
.070
.048
.061
.070
.070
.120
.048
.070
.085
.110
.048
.060
.070
.085
.110
.110
Str
EThick.
.057
.057
.086
.086
.099
.070
.109
.103
.122
.115
.119
.119
.160
.164
.115
.125
.156
.160
.123
.138
.138
.116
.188
.175
and
FWidth
.520
.5201.0301.0301.0301.2601.2601.2601.2602.1002.1002.1002.1002.1002.5602.5602.5602.5603.2003.2003.2003.2003.2003.200
ter of BridgesB
LWD
.459
.459
.688
.688
.8131.0001.0001.0001.0001.7501.8131.7821.7551.6882.2502.0002.0001.9002.7502.7502.7502.6252.5602.563
penings
DLWD
ALL WEIGHTS AND DIMENSIONS SHOWN ABOVE ARE APPROXIMATESpecial size sheets can be produced to order.
BRUNSWICKSTEEL.COM [email protected] 63
EXPANDED METAL GRATING
3
4
5
6.25
.540
.618
.655
.715
Style Overall Thickness
(inches)
3 lbs
4 lbs
5 lbs
6.25 lbs
Weight
(per sq. ft.)
8
8
8
8
StanShee
(feSWD
1.33
1.33
1.33
1.41
DiamoCentre t
(incSWD
.940
.940
.813
.813
.264
.300
.331
.350
Actuao
OpeSWD
Stran
(incWidth
3.44
3.44
3.38
3.38
.183
.215
.250
.312
l Sizefning
LWD
d Size
hes)Thick.
4
4
4
4
dardt sizeet)
LWD
5.33
5.33
5.33
5.33
nd Sizeo Centrehes)
LWD
64 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
WELDED STEEL BAR GRATING is the most popular of all grating types due to its strength, cost-efficient production and ease of installation. Universally used in most general industrial plants as well as commercial buildings, it has wide applications as walkways, platforms, safety barriers, drainage covers and ventilation grates.
WELDED1-3/16” Center to Center of Bearing Bars
WELDED
PLAIN19-W-4
Cross Rods 4” C/C
SERRATED19-W-4
Cross Rods 4” C/C
U = safe uniform load, psfC = safe concentrated load, pfwD = deflection, inchesE = modulus of elasticity, 29,000,000 psiF = fiber stress, 18,000 psi
Material: ASTM A-1011 standard
Deflection: Spans and loads to the right of the bold line exceed 1/4” deflection for the uniform load of 100 psf which provides safe pedestrian comfort. These can be exceeded for other types of loads with engineer’s approval.
Serrated Bars: For serrated grating, the depth of grat-ing required for a specified load is 1/4” deeper than that shown in the table.
General: Loads and deflections are theoretical and based on static loading.
BAR GRATING
BRUNSWICKSTEEL.COM [email protected] 65
STEEL BAR GRATING - LOAD & DEFLECTION TABLE (24” - 54”)
3/4” x 1/8”
3/4” x 3/16”
1” x 1/8”
1” x 3/16”
1-1/4” x 1/8”
1-1/4” x 3/16”
1-1/2” x 1/8”
1-1/2” x 3/16”
1-3/4” x 3/16”
2” x 3/16”
2-1/4” x 3/16”
2-1/2” x 3/16”
W 3.9P 4.3
W 5.6P 6.4
W 5.0P 5.4
W 7.2P 8.1
W 6.1P 6.8
W 8.9P 10.2
W 7.2P 7.9
W 10.5P 11.8
W 12.2P 13.5
W 13.9P 15.2
W 15.5P 16.8
W 17.2P 18.5
19-4-32
19-4-33
19-4-42
19-4-43
19-4-52
19-4-53
19-4-62
19-4-63
19-4-73
19-4-83
19-4-93
19-4-103
0.118
0.178
0.211
0.316
0.329
0.493
0.474
0.711
0.967
1.263
1.599
1.974
3550.099355
5330.099533
6320.074632
9470.074947
9870.060987
14800.0601480
14210.0501421
21320.0502132
29010.0432901
37890.0373789
47960.0334796
59210.0305921
1580.223237
2370.223355
2810.168421
4210.168632
4390.134658
6580.134987
6320.112947
9470.1121421
12890.0961934
16840.0842526
21320.0743197
26320.0673947
890.397178
1330.397266
1580.298316
2370.298474
2470.238493
3700.238740
3550.199711
5330.1991066
7250.1701451
9470.1491895
11990.1322398
14800.1192961
2270.155284
3410.155426
4040.116505
6060.116758
6320.093789
9470.0931184
9090.0781137
13640.0781705
18570.0672321
24250.0583032
30690.0523837
37890.0474737
1160.304203
1740.304305
2060.228361
3090.228541
3220.182564
4830.182846
4640.152812
6960.1521218
9470.1301658
12370.1142165
15660.1012741
19330.0913383
700.503158
1050.503237
1250.377281
1870.377421
1950.302439
2920.302658
2810.251632
4210.251947
5730.2151289
7490.1891684
9470.1682132
11700.1512632
UDC
UDC
UDC
UDC
UDC
UDC
UDC
UDC
UDC
UDC
UDC
UDC
Bar Size ApproximateWeight
(per sq. ft.)
Symbol Sec. Mod
(per ft.of width) 24”
SPlength of
36”
ar )
48”
(
30”
AN bearing B
42” 54”
66 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
STEEL BAR GRATING - LOAD & DEFLECTION TABLE (60” - 108”)
1” x 1/8”
1” x 3/16”
1-1/4” x 1/8”
1-1/4” x 3/16”
1-1/2” x 1/8”
1-1/2” x 3/16”
1-3/4” x 3/16”
2” x 3/16”
2-1/4” x 3/16”
2-1/2” x 3/16”
W 5.0P 5.4
W 7.2P 8.1
W 6.1P 6.8
W 8.9P 10.2
W 7.2P 7.9
W 10.5P 11.8
W 12.2P 13.5
W 13.9P 15.2
W 15.5P 16.8
W 17.2P 18.5
19-4-42
19-4-43
19-4-52
19-4-53
19-4-62
19-4-63
19-4-73
19-4-83
19-4-93
19-4-103
0.211
0.316
0.329
0.493
0.474
0.711
0.967
1.263
1.599
1.974
1010.466253
1520.466379
1580.372395
2370.372592
2270.310568
3410.310853
4640.2661161
6060.2331516
7670.2071918
9470.1862368
1100.536329
1640.536493
1580.447474
2370.447711
3220.383967
4210.3351263
5330.2981599
6580.2681974
810.730282
1210.730423
1160.608406
1740.608609
2370.521829
3090.4561083
3920.4061370
4830.3651692
840.563230
1250.563344
1300.451359
1960.451538
1880.376517
2820.376775
3840.3221055
5010.2821378
6340.2501744
7830.2252153
930.629304
1400.629455
1350.524437
2020.524656
2750.450893
3590.3931166
4540.3501476
5610.3151822
890.794355
1330.794533
1810.681725
2370.596947
3000.5301199
3700.4771480
701.006316
1051.006474
1430.862645
1870.754842
2370.6701066
2920.6031316
UDC
UDC
UDC
UDC
UDC
UDC
UDC
UDC
UDC
UDC
Bar Size ApproximateWeight
(per sq. ft.)
Symbol Sec. Mod
(per ft.of Width) 60”
(length
72”
ing bar)
84”66”
SPAN of bear
78” 96” 108”
BRUNSWICKSTEEL.COM [email protected] 67
STAFETY GRATING - DIAMOND GRIP®
PRODUCT DESCRIPTIONDIAMOND-GRIP® is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and has rough serrated edges around diamond shaped openings. Diamond openings are complete with radiused corners at the saddle and side channel locations.
MATERIAL SPECIFICATIONSGrating shall be “DIAMOND GRIP® channel,” manufactured from Pre-Galvanized Steel and complete with a (1-1/2”, 2”, 2-1/2”, 3”) side channel.
4 3/4”
7”
9 1/2”
11 3/4”
18 3/4”
24”
5/16”
1/4”
1/4”
3/16”
3/16”
7/16”
14 ga.
12 ga.
12 ga.
12 ga.
12 ga.
12 ga.
2.4
4.2
5.1
6
8.5
10.4
7/8”
1”
7/8”
1”
1”
1 1/8”
1 1/2”
1 1/2”
1 1/2”
1 1/2”
1 1/2”
2”
Channel Width
“A”
Diamond to Outside“C”
Return Flange
“B”
Height (Varies)
“D”
Gauge (Varies)
“E”
Weight(per Linear Ft.)
* Most common shown, inquire for different sizes.
68 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
STAFETY GRATING - SAFETY GRIP®
PRODUCT DESCRIPTIONSAFETY GRIP® is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and large debossed holes, surrounded by smaller embossed traction buttons.
MATERIAL SPECIFICATIONSGrating shall be “SAFETY GRIP® channel,” manufactured from Pre-Galvanized Steel and complete with a (1-1/2”, 2”, 2-1/2”, 3”) side channel depth.
ChannelWidth
“A”
L HoleChannel Edge
“C”
ReturnFlange
“B”
5”
7”
10”
12”
18”
24”
30”
1 21/32”
1 13/16”
1 5/8”
1 25/32”
1 13/32”
1 7/8”
2 11/36”
7/8”
1”
7/8”
1”
1”
1 1/ 18”
1 1/18”
BRUNSWICKSTEEL.COM [email protected] 69
Diameter Weight(lbs per sq. ft.)
1/45/163/81/25/83/47/81
.167
.261
.376
.6681.0431.5022.0452.670
ALL THREAD ROD - COARSE THREAD
REINFORCING BARS (Rebar)
CONCRETE REINFORCING BARS6 METRE ( 19’ 8” ) LENGTHS
ALL THREAD ROD - COARSE THREAD12 FOOT LENGTHS
Size Diameter
10M
15M
20M
25M
10mm (.394”)
15mm (.591”)
20mm (.797”)
25mm (.984”)
WeightLbs/Foot
WeightLbs/Foot
.528
1.055
1.583
2.638
Diameter
1/4” .167
5/16” .261
3/8” .376
1/2” .668
5/8” 1.043
3/4” 1.502
7/8” 2.045
1” 2.670
- 43 -
3/167/321/49/325/1611/323/813/32
7.668.9310.2111.4912.7614.0415.3116.59
3.6253.753.875
4.4.1254.254.375
.1875
.21875
.25
.28125
.3125
.34375
.375
.40625
3 5/83 3/43 7/8
44 1/84 1/44 3/8
Metric BarDesignation
Kilograms(per lineal meter)
Pounds(per lineal ft.)
Nomi
in2
nal Area
mm2
70 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
DATA
1/641/323/641/16
5/643/327/641/8
9/645/32
11/643/16
13/647/32
15/641/4
17/649/32
19/645/16
21/6411/3223/64
3/8
25/6413/3227/647/16
29/6415/3231/64
1/2
.3962
.79251.19131.5875
1.98442.37992.77623.1750
3.57123.96754.36634.7625
5.15875.55495.59386.3500
6.74627.14257.54127.9375
8.33378.75999.12879.5250
9.921210.317410.716711.1125
11.508711.904912.303712.7000
.5156
.5312
.5469
.5625
.5781
.5937
.6094
.6250
.6406
.6562
.6719
.6875
.7031
.7187
.7344
.7500
.7656
.7812
.7969
.8125
.8281
.8437
.8594
.8750
.8906
.9062
.9219
.9375
.9531
.9687
.98441.000
.0156
.0312
.0469
.0625
.0781
.0937
.1093
.1250
.1406
.1562
.1719
.1875
.2031
.2187
.2344
.2500
.2656
.2812
.2969
.3125
.3281
.3437
.3594
.3750
.3906
.4062
.4219
.4375
.4531
.4687
.4844
.5000
33/6417/3235/649/16
37/6419/3239/64
5/8
41/6421/3243/6411/16
45/6423/3247/64
3/4
49/6425/3251/6413/16
53/6427/3255/64
7/8
57/6429/3259/6415/16
61/6431/3263/64
1
13.096213.492513.891214.2875
14.683715.079915.478715.8750
16.271216.667517.066217.4625
17.858718.254918.653819.0500
19.446219.842520.241320.6375
21.033721.429921.828722.2250
22.621223.017523.416223.8125
24.208724.604925.003725.4000
Inch Fractions mm
InchDecimals
InchDecimals
Inch Fractions mm
IMPERIAL / METRIC CONVERSION CHART(Numerical Equivalents of Fractions, Decimals & Millimeters)
BRUNSWICKSTEEL.COM [email protected] 71
DATA
6867666564
6362616059
5857565554
5352515049
4847464544
4240383634
32302826242220
inexactand only for steel
351
338325313301292
283273264255246
238229221215208
194182171161152
146138131125119115110
-----
-----
615595577560543
525512496481469
451442432421409
390371353336319
301286271258247237226
C150 kg BraieRockwell
Approx. TensileStrengthksi
BRINELL3000 kg/10mm BallBrinell** (Standard Ball)
HARDNESS CONVERSIONSApproximate relations betwen Brinell, Rockwell and the tensile strengths of S.A.E. carbon and alloy construction steels.
72 204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA
DATA
USEFUL INFORMATION
To find circumference of a circle multiply diameter by 3.1416.
To find diameter of a circle multiply circumference by .31831.
To find area of a circle multiply square of diameter by .7854.
Radius of circle equals half of diameter.
Area of rectangle. Length multiplied by width. Doubling the diameter of a circle increases its area four times.
To find area of a triangle multiply base by 1/2 perpendicular height.
Area of ellipse = product of both diameters x .7854.
Area of parellelogram = base x altitude.
To find side of an inscribed square multiply diameter by 0.7071 or multiply circumference by 0.2251 or divide circumference by 4.4428.
Side of inscribed cube = radius of sphere x 1.1547.
To find side of an equal square multiply diameter by .8862.
Square. A side multiplied by 1.4142 equals diameter of its circumscribing circle.
A side mulitplied by 4.443 equals circumference of its circumscribing circle.
A side multiplied by 1.128 equals diameter of an equal circle.
BRUNSWICKSTEEL.COM [email protected] 73
A side multiplied by 3.547 equals circumference of an equal circle.
To find cubic inches in a ball multiply cube of diameter by .5236.
To find cubic contents of a cone, multiply area of base by 2/3 the altitude.
Surface of frustum of cone or pyramid = sum of circumference of both ends x 1/2 slant height plus area of both ends.
Contents of frustum of cone or pyramid = multiply area of two ends and get square root. Add the 2 areas and x 1/3 altitude.
Doubling the diameter of a pipe increases its capacity four times.
A cubic foot of water contains 7.4805 U.S. (6.2278 Imp.) gallons, 1728 cubic inches, and weighs 62 1/2 lbs
To find the pressure in pounds per square inch of a column of water multiply the height of the column in feet by .434.
Steam rising from water at its boiling point (212o) has a pressure equal to the atmosphere (14.7 lbs to the square inch).
A standard horse power: The evaporation of 30 lbs of water per hour from a fee water temperature of 100o F. into steam at 70 lbs gauge pressure.
To ascertain heating surface in tubular boilers multiply 2/3 the circumference of boiler by length of boiler in inches and add to it the area of all the tubes.
One metre equals 39.37 inches.
To find millimetre equivalent of inch decimals, multiply by 25.4.
DATA
204-224-1472 125 BISMARCK STREET WINNIPEG, MANITOBA [email protected]
MAKE IT. WORK.