Download - Quick Start Guide HERO
HERO Device
12V DC Power Supply
AC Power Cord
For more information, please visit: http://hero.terasic.com
Quick Start Guide
HEROH
P
1 1
2
3
Micro USB Cable4
2
3 4
For any technical questions, please e-mail us atwww.terasic.com.cn
USB 3.0 Host Port
Ethernet Port
Power Button
HDMI 2.0a Port
Ethernet Port
USB 3.0 Port
USB 3.1 Type-C Port
USB 3.0 Device PortUSB Blaster Connector
FPGACPU
For more information please visit: http://hero.terasic.com
15
6
2
3 4
12
34
5
6
7
Connect the 12V DC power supplyPower on the FPGA board (rear switch)Turn on the power of the CPU board (front switch)Set up the Linux Desktop on the display monitor(Username: robot Password: intel123)
Connect HDMI displayConnect a USB keyboard and mouse
Please perform the boot test in the following order. Make sure the FPGA board power-on procedure is done before the CPU board is turn on.
Perform FPGA OpenCL DDR4 read and write tests:
a. Open Linux Terminalb. Execute "cd ~/data" c. Execute "source altera_rte.sh"d. Execute "aocl diagnose all"e. Observe the DDR4 test results, as shown on the left
B
D
CPT-3346-00
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information: Terasic:
P0563