QUANZHOU SEASUNSTAR CRAFT CO.,LTD.
Fountain Process( Material: Polyresin)
Drawing Design:
Carving:
→
The new sculptures are generally based on the drawing designs.
Material: Black mud, Gesso
→
Carving:Sometimes ,our engineers finish the new sculpture according to some material, things such as bark , wood ,stone ,animal etc.
←↙
The board and bucket are made of gesso.
The pipe is real, not sculptural.
→
↑The base and shoes are made of black mud. It makes the sculpture more natural than using gesso.
Opening Mold:
The mold sample
→ →
↓
Pour the slurry of Silica gel and brush.
←←
Paste the fiberglass on the mold sample.
Material: Polyfoam, The slurry of silica gel ,The slurry of polyresin , Yellow mud ,Fiberglass.
Opening Mold:Pour, brush and paste again.
→ →
↓
←
Then brush the slurry of polyresin.
Remove the partial polyfoam. Repeat the above steps.
Opening Mold:
→
→
The mold is OK.
Shaping:
→
One mold consists of two parts.
Join the two parts of the mold.
←
Material: Slurry of Poly resin
Check the mold and make sure the mold is good for production
→
Fix two parts tight with screws.
○
→
Pour the slurry of poly resin into the mold
○
Roll the mold to make the slurry cover the whole silica mold.
Shaping:
→
After rolling, need 15 minutes for the slurry to solidify.
Open the mold and remove the silica mold from the shaped product
→→
Shaped product
Grinding ,Drilling and Trimming:
→
←
Washing and Steeping :
→
Mending:
Makes the mold line smooth and natural after trimming.
Mending:Before Mending After Mending
Painting:Spraying
Painting:Brushing
Testing:(1) Water leakage test (2) Function testing
Testing:
\□Use paper to test the splash. If splash is too much, test fail, then product needs to be re-worked.
( Dry paper )
(Testing time: 24 hours)Water flow testing
Testing:
The good testing.
□←
Water flow testing
Packaging:
→
□□
Pump/Transformer Instruction manualPlace the Pump , Transformer ,Product Instruction in related space.
→ →