Transcript
Page 1: Qualitative Inorganic Analysis

Qualitative Inorganic Qualitative Inorganic AnalysisAnalysis

Page 2: Qualitative Inorganic Analysis

Analytical chemistry could be divided into three main parts; qualitative, quantitative and applied.

Qualitative analysis deals with detection and identification of different substances singly or in a mixture.

This part deals with the qualitative analysis of anions, which could be defined as the negatively charged fragments of salt or compound. Alternatively anions refer to acid radical.An example is Nacl:

NaCl Na + + Cl-

Cation Anion Basic radical Acid radical

Page 3: Qualitative Inorganic Analysis

Anions are divided into six groups:

1- Carbonates and Bicarbonates group

2- Sulphur-containing anions

3- Halides

4- Cyanogen anions

5- Arsinic and phosphorous containing anions

6- Nitrogen- containing anions

Page 4: Qualitative Inorganic Analysis

Carbonates and Bicarbonates group

CO32- HCO3

-

I. General characters

1- Parent acid:

Carbonic acid (H2CO3) is a very weak volatile acid

(stronger than HCN and boric acid) Heating of solution of H2CO3, CO2 will evolve.

H2CO3 CO2 + H2O Bicarbonates are considered to be the first step of ionization of carbonic acid, while in the second step carbonates are formed H2 CO3 H+ + HCO3

- H+ + CO32-

Page 5: Qualitative Inorganic Analysis

2-Solubility:

All carbonated with the exception of those of the alkali metals (Na+ and K+) and of ammonium are insoluble in water.

All bicarbonates are soluble in water.

II. General Reactions

1- Dry Reactionsa- Action of dilute HCl

Decomposition with effervescence due to the evolutionof CO2 gas, for both CO3

-- and HCO3

-

CO3-- + 2H+ CO2 + H2O

This is a type of displacement reaction in which stronger acid

liberates the very weak carbonic acid, which spontaneously

decomposes to CO2 & H2O.

NaHCO3+ H+ CO2 + H2O + Na+

Page 6: Qualitative Inorganic Analysis

Test for CO2 gas:

The solid substance is placed in a test tube, dilute HCl is added, which immediately displaced the gas, which is evolved

)upon warming (and passed into lime water or baryta water contained in another test tube.

The production of a turbidity indicates the presence of carbonates or bicarbonates.CO2 + Ca(OH)2 CaCO3 + H2O

CO2 + Ba (OH)2 BaCO3 + H2O

With prolonged passage of CO2, the turbidity formed due to the insoluble carbonates, slowly disappears as a result of the formation of a soluble bicarbonate. CaCO3 + CO2 + H2O Ca (HCO3)2

Boiling

Page 7: Qualitative Inorganic Analysis

2 -Wet Reactions

In order to carry out the wet reactions, a solution of the substance in water must be done.

Bicarbonates are mostly decomposed on heating with the liberation of CO2.

2HCO3- CO3

-- + H2O + CO2 .

a- Reaction with AgNO3A white precipitate of silver carbonate is immediately formed.

CO3 -- +2Ag+ Ag2CO3

The precipitate is soluble in mineral acids (nitric acid) and in ammonia.

Ag2CO3 + 2H+ 2 Ag+ + CO2 + H2O

Ag2CO3+4NH3 2[Ag (NH3)2]+ + CO3

2-

The precipitate becomes yellow or brown if the mixture is boiled.Ag2CO3 Ag2O +CO2

boiling

Page 8: Qualitative Inorganic Analysis

b- Reactions with BaCl2, CaCl2 and MgSO4:White precipitates of BaCO3, CaCO3 and MgCO3 will be obtained

upon the addition of these reagents to samples of carbonate solution.

BaCl2 + NaCO3 BaCO3 + 2 NaCl

Ca++ + CO3 --

CaCO3

Mg++ + CO3 -- MgCO3

The precipitate is soluble in mineral acids

For HCO3- ; No ppt. on cold since all bicarbonates are soluble in

water

Ba++ +2HCO3- Ba(HCO3)2

Soluble

H2O + CO2 + BaCO3

Boiling

Page 9: Qualitative Inorganic Analysis

III. Mixture of CO32- & HCO-3

Both anions haves similar reactions, but CO32- form precipitates

immediately on cold upon the addition of CaCl2, BaCl2 or MgSO4, while the bicarbonates of these metals are soluble.

Separation:Add excess CaCl2 (BaCl2 or MgSO4) to a solution of the

mixture CO3

2- /HCO3- a white ppt. indicates CO3

-- , centrifuge or filter

Contrifugate White ppt. May be HCO3

- CaCO32-

H+

CO2 + H2O

Confirmatory test: 1) Boil 2 (Add ammonia

solution white ppt.

Ca (HCO3)2 + 2 NH3 CaCO3+ (NH4)2 CO3

Page 10: Qualitative Inorganic Analysis

Sulphur-containing anions

This group of anions, are;1- Sulphide (S2-)

2- Sulphites (SO32-)

3- Thiosulphate (S2O32-)

4- Sulphates (SO42-)

5- Perasulphate (S2O82-).

I. General characters1 -Parent Acids: a- Hydrogren sulphide or Hydrosulphuric acid (H2S)

It is a gas with offensive rotten egg odour and poisonous. In solution

it gives a weak acid, which ionizes in two steps; H2S H++ HS- (hydrosulphide ion)

HS- H++ S-- (sulphide ion)

Both HS- and S-- ions give the same reactions.

Page 11: Qualitative Inorganic Analysis

b- Sulphurous acid:(H2SO3)

This acid is only known in solution (like H2CO3). It has moderate

strong acidity. Like H2CO3 in water; present in equilibrium as follows:

H2SO3 H++ HSO3- H++ SO3

-- H2O + SO2

heat

Acid sulphitec- Thiosulphuric acid: (H2S2O3)It is not known in the free form, and decomposes to give, H2O, SO2 and S.

It's more stronger than sulphurous acid in solutions.It consists of SO3

2- solution and S, which upon boiling gives S2O32- .

d- Sulphuric acid: (H2SO4):It's a colourless oily liquiud (B.P. 3300C) .General properties of H2SO4

1- Acid properties; It is one of the strongest acids, ionize in dilute solutions in two steps , H2SO4 H

++ HSO4- (hydrogen sulphate)

HSO4- H++ SO4

-- (sulphate)

Page 12: Qualitative Inorganic Analysis

Metals can liberate hydrogen from H2SO4 solution.H2SO4+ Zno ZnSO4+ H2

Being a strong acid can replace weak acids like, boric acids, hydrocyanic acid and volatile acids or their decomposition

products due to its high B.P.

2NaCl + H2SO4 Na2SO4+ 2HCl

2- Dehydrating properties; Conc. H2SO4 has a great tendency to combine with water to from

stable hydrates H2SO4.x H2O. So it is used as a dehydrating agent for

certain substance, and used mostly in the dissectors. It causes charring for certain organic substances as sugars due to the vigorous abstracting of water from theses substances. 3- Oxidizing properties: It's considered to be as moderately strong oxidizing agent when

heated with most reducing agents

H2SO4 H2O + SO2 + [O]

It is reduced to SO2, while with active reducing agents it may

be reduced to So or H2S.

heat

Page 13: Qualitative Inorganic Analysis

2-Solubility:All Na+, K+ and NH4

+ salts of sulphur containing anions are soluble

in water.

Sulphides : Other sulphides are in-soluble except those of Ca++ ,Ba++, & Sr2+ dissolve due to hydrolysis .

Sulphites: Other sulphites are all in-soluble. Thiosulphates: Most S2O3

2-are soluble, Ag+, Pb++, Hg2+ & Ba++ salts

are slightly soluble.

Sulphates: All sulphates are soluble except Pb++, Ba++ and Sr++ . Ca++ & Mg++ salts are slightly soluble.

Page 14: Qualitative Inorganic Analysis

3-Complexing agent: Thiosulphate form complex with Fe3+

Fe3++ 2S2O3-- (Fe(S2O3)2)

- purple color

4-Reducing agent:

Sulphides, sulphites and thiosulphates are reducing agents.

They reduce solutions of I2, KMnO4 and K2Cr2O7 with varying activities in acidified solutions.

I2+S2- 2I-+So lodine (brown) Colourless

H+

2KMnO4+ 5S2-+ 16H+ 2Mn+++ 5SO4--+ 8H2O +2K+

Page 15: Qualitative Inorganic Analysis

I2+SO32-+H2O SO4

2-+2I-+2H+

2 MnO4-+ 5 SO3

--+ 6H+ 2Mn+++ 5SO4--+ 3H2O

Cr2O7--+ 3SO3

2-+ 8H+ 2Cr3++ 3SO4--+4H2O

I2+2S2O3-- H+ S4O6

2-+2I-

Tetrathionate

Fe3++2S2O32- S4O6

2-+Fe2+ H+

8MnO4-+ 5 S2O3

--+ 14H+ 8Mn+++10SO4--+7H2O

4Cr2O72-+ 3S2O3

2-+ 26H+ 8 Cr3++6SO4--+ 13 H2O

Page 16: Qualitative Inorganic Analysis

II. General Reactions

1- Dry Reactionsa- Action of dilute HCl1.Sulphide; S2-

H2S gas; evolved upon adding dil. HCl to a solid sample.

The gas evolved has its characteristic rotten egg odour, and could be identified by 1- blackening of filter paper moistened with lead acetate sol.

S-- + 2H+ H2S

2- alternatively, a filter paper moistened with cadmium acetate solution,

turns yellowH2S + Cd++ CdS

Yellow

H2S has reducing character, It reacts with l2 solution, acid KMnO4, acid K2Cr2O7

H2S+Pb++ PbS black

Page 17: Qualitative Inorganic Analysis

It bleaches the brown color of l2 solution, changes the pink color of

acid KMnO4 into colorless and changes the orange color of acid

K2Cr2O7 into green.

H2S + l2 2l- + 2H+ +So

5H2S + 6H+ +2 MnO4- 2Mn++ + 8H2O + 5So

3H2S + 8H+ + Cr2O7-- 2Cr3+ + 7H2O + 3So

2- Sulphite: SO32-

Upon treatment of SO3-- with dil. HCl, SO2 gas will evolve, due to the

decomposition of the liberated unstable H2SO3

SO--3 + 2H+ H2SO3 SO2 +H2O

The evolved SO2 gas has a characteristic bunt sulphur odor and turbid

lime water (like CO2) due to the formation of the insoluble CaSO3 which

is soluble upon prolonged passage of SO2 due to the formation of soluble

calcium bisulphite.Ca (OH)2 +SO2 CaSO3 + H2O

Page 18: Qualitative Inorganic Analysis

CaSO3 + SO2 + H2O Ca(HSO3)2.

SO2 like H2S has reducing character, bleaches the brown color of iodine, reacts with acid KMnO4 and acid K2Cr2O7.

l2 + SO2 + H2O SO3 + 2H++ 2l-

2 MnO4- + 5 SO2 + 6H+ 2Mn++ + 5SO3 + 3H2O

Cr2O72- +3 SO2 + 8H+ 2Cr3++ 3SO3 + 4H2O

3- Thiosulphate; S2O32-

No immediate change on cold, but on warming with dil. HCl or standing, the solution become turbid due to the liberated yellow colloidal sulphur with evolution of SO2 gas. This is due to the decomposition of the

produced unstable thiosulphuric acid. S2O3

-- + 2H+ H2S2O3 H2O + SO2 + So

Thiosulphate has the same action of sulphite with HCl in addition to formation of yellow colloidal precipitate.

Page 19: Qualitative Inorganic Analysis

4- Sulphate: SO42-

No reaction with dil. HCl.

2 -Wet Reactions

a- Reaction with BaCl2: Add BaCl2 reagent to neutral sample solution:

1- S2- : No visible reaction

2 -SO32- : White ppt. of BaSO3 is formed which is soluble in dil.

HCl. Ba+++ SO3

2- BaSO3 3- S2O3

-- : No ppt. in dilute solution, but a ppt. is formed from very

concentrated solution. 4- SO4

-- : A white ppt. of BaSO4 is formed which is insoluble in dil. HCl,

even upon boiling.

Ba+++ SO4-- BaSO4

White

Page 20: Qualitative Inorganic Analysis

b- Reaction with AgNO3: Add AgNO3 reagent to the neutral sample solution

1 -S2- : a black ppt. of Ag2S is formed which is soluble in hot dil. HNO3, insoluble in ammonia and KCN solution

2 Ag++ S-- Ag2S

black

2- SO32-: A white crystalline ppt. of Ag2SO3 is formed, which on boiling with

water undergoes self oxidation reduction with the production of grey ppt. of metallic silver.

2 Ag++ SO32- Ag2SO3 White

2 Ag2SO3 boil 2 Ago + Ag2SO4 + SO2

Page 21: Qualitative Inorganic Analysis

Silver sulphite is soluble in nitric acid, ammonia and in excess sulphite to give a complex salt, which on boiling gives a grey ppt. of metallic silver

Ag2 SO3 + SO3-- 2(AgSO3)

-

2(AgSO3)- boiling 2Ago+ SO4

-- + SO2

3- S2O3-- : Forms white ppt. of silver thiosulphate which changes its color

on standing to yellow, brown and finally black, due to the formation of Ag2S.

Ag2S2O3 is soluble in excess S2O3

-- to give a complex ion.

2 Ag+ + S2O3-- Ag2 S2O3

Ag2S2O3+ H2O Ag2S + H2SO4

Ag2S2O3+ 3S2O3-- 2(Ag(S2O3)2)

3-

Page 22: Qualitative Inorganic Analysis

4- SO42- : No ppt. in dil solution, but a ppt. may be formed in a very

concentrated solution.

c- Reaction with FeCl3: Add FeCl3 reagent to the neutral sample solution

1 -S2- : a black ppt. of Fe2S3 is formed which is soluble in dil. HNO3

2Fe3++ 3S-- Fe2S3

black

2- SO3--: A drak red color of ferric sulphite is produced on cold.

2Fe3++ SO3-- Fe2(SO3)3

3- S2O32-: A purple color of complex ferric thiosulphate is produced

which disappears on boiling as tetrathionate and Fe2+ are formed from the oxidation of S2O3

2- with Fe3+, even on cold

Fe3++ 2S2O32- (Fe(S2O3)2)-

2 S2O3--+ 2Fe3+ 2Fe+++ S4O6

--

4-SO42- : do not react with FeCl3.

Page 23: Qualitative Inorganic Analysis

d- Reaction with lead acetate: Adding lead acetate reagent to the neutral sample solution.

1- S--: A black ppt. of PbS is produced

Pb+++ S-- PbS

2- SO32-: A with ppt. of lead sulphite which is soluble in cold HNO3.

On boiling oxidation to PbSO4 which is a white ppt. occurs.

SO3--+ Pb++ PbSO3

3- S2O3--: A white ppt. of lead thiosulphate is formed which is soluble

in cold HNO3, on boiling a black ppt. of PbS is formed.

Pb+++S2O3-- PbS2O3

4- SO4--: A white ppt. lead suphate, which is insoluble in cold dil. mineral

acids, but soluble in ammonium acetate and hydroxide solutions (Na+ and K+)

Page 24: Qualitative Inorganic Analysis

Pb+++ SO42- PbSO4

PbSO4+ 4 CH3 COO- (Pb (CH3COO)4)2-+ SO4

2-

PbSO4+ 3OH- HPbO2-+ H2O +SO4

2-

Plumbites

III. Special Tests

1.Sulphide; S2-

Cadmium carbonate test :

The sulphide solution is shaken with CdCO3 powder, a canary

yellow ppt. of CdS is produced.

S--+ CdCO3 CdS + CO32-

This test could be used for the identification and separation of S2-

when present in a mixture with other sulphur containing anions, or those anions which do not react with CdCO3.

Page 25: Qualitative Inorganic Analysis

2- Sulphite: SO32-Zinc nitroprusside test :

Add to cold saturated ZnSO4 solution, equal volume of K4[Fe (CN)6] solution, add few drops of 1% sodium nitroprusside solution. This solution

is added to the SO32-solution,a salmon-colored ppt. of zinc

nitroprusside is formed Zn (Fe(CN)5 NO). The latter reacts with moist SO2 to give a

red ppt. of Na5[Fe(CN)5 SO3] 3- Thiosulphate; S2O3

2-Formation of thiocyanate :By boiling with KCN solution (poison), in the presence of NaOH, Cool ,

acidify and add FeCI3, a blood red color of ferric thiocyanate complex

is produced. S2O3--+ CN- OH- SCN-+ SO3

--

boil

Fe3++ SCN- Cool Fe(SCN)2+

Page 26: Qualitative Inorganic Analysis

4- Sulphate: SO42-

Hepar’s test Sulpate is reduced by carbon to sulphide by heating on a piece

of charcoal in the presence of Na2CO3 in the reducing zone of the flame

MSO4+ Na2CO3 Fusion Na2SO4+ MCO3

Na2SO4+ C Na2S + 4 CO

Transfer the fusion product to a silver coin and moisten with a little water, a brownish black stain of Ag2S results.

S--+ 2H2O 2 OH-+ H2S

H2S + 2 Ag Ag2S +H2

Page 27: Qualitative Inorganic Analysis

IV. Analysis of Mixtures

1 -Mixture of S2-, SO32-, S2O3

2- and SO42-: Separation is carried first shaking the mixture solution with CdCO3

powder. The centrifugate is allowed to react with BaCl2 solution which

will precipitate BaSO4 and BaSO3 leaving S2O32-as soluble

centifugate.The precipitated BaSO4 and BaSO3 can be separated by the solubility of BaSO3 in excess dil. HCI.

S2-, SO32-, S2O3

2- , & SO42-

Solution + CdCO3

Yellow ppt. S2- Centrifugate

+ BaCI2

Centrifugate

S2O32-

SO2 + So

HClHeat

White ppt. BaSO3+BaSO4

HCl

White PPt SO4

2- Centrifugate SO3

2- confirm by reducing character

Page 28: Qualitative Inorganic Analysis

2- Mixture of CO32- and SO3

2- or S2O32- This type of mixtures are considered to be difficult, due to the interference

occur upon the addition of dil. HCI which liberates CO2 and SO2 gases which turbides lime water and disappears on prolonged passage. SO2 can be detected by its reducing characters as discussed before, but CO2 has non reducing characters.Therefore SO3

2- or S2O32- ions must be firstly oxidized into SO4

2- by an oxidizing agent such as H2O2,K2Cr2O7 or KMnO4 and dil. H2SO4 and warm, CO2 will only evolve which can be test with lime water.

3- Mixture of H2S and SO2 gases: In order to differentiate between these two gases which evolve upon the addition of dil. HCI to sulphides, sulphites and thiosulphates andhaving similar reducing properties. A paper moistened with lead acetatesolution changes into black when exposed to H2S gas, SO2 can cause

turbidity to lime water

Page 29: Qualitative Inorganic Analysis

Halides

This group of anions, are;1- Fluoride (F-) 2- Chloride (Cl-)

3- Bromide (Br-)4- Iodide (I-)

Fluorides, chlorides, bromides and iodides are known as halogens.They are characterized by their higher electronegativityAs the ionic size increases, the tendency to loose electrons increases

and therefore iodide ion is firstly and easily oxidized into free I2 by loosing

readily an electron followed by Br - when present in a mixture.However it's difficult to oxidize F- into F2, hence F- ions are highly stableto held strongly a proton. Therefore the order of stronger halogen acid is from HI HBr HCl

HF.

Page 30: Qualitative Inorganic Analysis

I. General characters

1 -Parent Acids: a- Hydrofluoric acid; HF : It's coloress fuming highly corrosive and itching liquid (B.P. 19.4oC) .

Soluble in water producing the weakest acidic solution in the halogen acid series . b- Hydrochloric acid : HCl

Colorless gas with irritating odor, fumes in moist air, extremely soluble in water to form acidic solution. Concentrated HCI contains 37% of

HCI gas . c- Hydrobromic acids : HBrColorless gas with irritating odor, fumes in moist air and is extremely soluble in water forming very strongly acidic solution.On standing the solution becomes yellow due to the oxidation to bromine.

d- Hydroiodic acid: HIColorless gas with irritating odor, fumes strongly in moist air, soluble

in water forming the strongest acidic solution of the haloacid series. the solution is colorless, becomes brown on standing due to the

liberated iodine.

Page 31: Qualitative Inorganic Analysis

2-Solubility:

All the salts of CI-, Br- and I- are soluble except Ag+, Hg22+, & Cu+ salts,

their lead salts are slightly soluble in cold water, soluble in hot water. The alkali metal salts of fluorides, ammonium and silver salts are soluble, other salts are insoluble or sparingly soluble.3-Reducing agent:Cl- has very weak reducing character. Br- and I- have reducing character, they can react with oxidizing agent like chlorine water to give Br2 or I2.I- has strong reducing power than Br- so it react with FeCl3, H2O2 and nitrite solutions.

II. General Reactions

1- Dry Reactionsa- Action of dilute HCl

Hydrochloric acid shows no reaction upon treatment of the solid sample with it even on heating. This reaction can differentiate carbonate and sulphur group from halides.

Page 32: Qualitative Inorganic Analysis

b- Action of concentrated H2SO4:Decomposition of the halides occurs upon the addition of

the strong non-volatile concentrated H2SO4 to the solid sample, this

occurs in the cold, completely on warming with the evolution of HX

which can be recognized by a) the fumes evolved. b) Confirmatory chemical test 2X-+ H2SO4 = 2 HX + SO4

2- X = may be CI-, I-, Br- and F-

1 -For Fluoride :Fluoride gives a characteristic reaction when treated with conc. H2SO4.Hydrofluoric acid is produced which is colorless and fumes with moist air.due to the corrosive and itching action of the gas on the glass in presence of H2O, the test tube or the glass rod subjected to the evolved HF gas acquire oily appearance due to the formation of silicic acid and hydrofluorosilicic acid.

This test is considered to be specific for fluoride anion, even in the presence

of other halides.2 F-+ H2SO4 2H F +

SO4--

4HF + SiO2 SiF4+

2H2O

glass 3 SiF4+ 3H2O H2 SiO3+ 2 H2 SiF6

silicic acid hydrofluoro silicic acid

Page 33: Qualitative Inorganic Analysis

2- For chloride :

HCI gas is evolved upon treatment with conc. H2SO4 which can be

identified by :2CI-+ H2SO4 2 HCI + SO4

--

1- Formation of white fumes with moist air due the formation of droplets of hydrochloric acid. 2- Pungent irritating odor.3- Changing a blue moistened litmus paper into red.4- Formation of white fumes of NH4CI when a glass rod moistened with ammonium hydroxide solution is exposed to the evolved gas. NH4OH + HCI NH4CI + H2O

3- For Bromide:A mixture of HBr and Br2 may be formed which have characteristic

brown color especially on warming. At the same time sulphuric acid will be reduced into SO2, H2S or S

2 Br-+ H2 SO4 2 HBr +

SO4--

2 HBr + H2SO4 Br2 + SO2+ 2 H2O

Page 34: Qualitative Inorganic Analysis

4- For iodide:

Since HI is the most active reducing agent, so it is readily oxidized to iodine which appears as violet fumes. I2 can be detected by exposing

the evolved gas to paper moistened with starch solution, it changesinto blue.

2I-+ H2SO4 2 HI + SO42-

2HI + H2SO4 I2 + SO2 + 2H2O6HI + H2SO4 3 I2 + S + 4H2O 8HI + H2SO4 4 I2 + H2S +

4H2O

c- Action of concentrated H2SO4 and MnO2:If the solid halide is mixed with an equal quantity of precipitated

manganese dioxide, concentrated H2SO4 added and the mixture gently warmed. Chlorine, bromine and iodine are evolved from CI-, Br-

and I- but F- liberates HF since it has no reducing properties.

2X- + 4H++ MnO2 Mn+++ 2H2O +X2

X = may be CI-, Br- and I-

Page 35: Qualitative Inorganic Analysis

The free halogen, (X2) could be detected by:1- Bleaching of a moistened colored litmus paper.2- Suffocating, and irritating odor.3- Characteristic color of Br2 (brown), I2 (violet) and CI2 gas (greenish tint).4- I2 changes starch paper into blue, Br2 turns it orange.5- CI2 and Br2 change a starch – KI into blue due to the oxidation of I- to I2 produce a blue adsorption complex.CI2+ 2KI 2KCI

+ I2

Br2+ 2KI 2KBr + I2

2 -Wet Reactions

a- Reaction with AgNO3: To 1ml of the salt solution add AgNO3 reagent.

1- Fluoride: No precipitate, since AgF is soluble in water.

2- Chloride: A white curdy ppt. of AgCI which is insoluble in nitric acid, soluble in KCN and Na2S2O3 as other silver halides.

The precipitated AgCI is soluble in dil. ammonia solution to give the ammine complex.

Page 36: Qualitative Inorganic Analysis

Ag++ CI- AgCI

AgCI + 2NH3

[Ag(NH3)2]CISilver ammine

chloride[Ag(NH3)2] CI + 2H+ 2 NH4

++ AgCI

AgCI is reprecipitated upon treatment of the ammine complex with acid.AgX + 2CN- [Ag (CN)2]

-

+X- Soluble complex

AgX + 2 S2O3-- [Ag(S2O3)2]

3-+X-

3- Bromide: A curdy, pale yellow precipitate of AgBr, sparingly soluble in dilute, but readily soluble in conc. ammonia solution

Ag++ Br- AgBr AgBr + 2 NH3 [Ag(NH3)2]++

Br-

4- Iodide: A curdy yellow ppt. of AgI is formed which is insoluble in dil. ammonia but very slightly soluble in conc. ammonia solution.

Ag++ I - AgI

Page 37: Qualitative Inorganic Analysis

There is a periodicity in character of three silver halides. Since AgI is the most insoluble one, followed by AgBr and AgCI. Therefore AgCI will be dissolved in dil. ammonia, followed by AgBr in conc. Ammonia

solution but AgI does notThis is also attributed to that the conc. of silver ions (Ag+) produced form

the dissociation of silver ammine complex according to its instability constant is insufficient to exceed the high solubility product of AgCI,

approach that of AgBr (partially soluble) but exceeds that of AgI. [Ag(NH3)2]

+ Ag++ 2NH3

Instability constant = (Ag+) (NH3)2

_________________

] Ag(NH3)2[+ Therefore when Br- or iodide solutions are added to AgCI, yellow

ppt. of AgBr or AgI are formed.

AgCI + Br- (or I-) AgBr (or AgI) + CI-

AgBr + I- AgI + Br-

Page 38: Qualitative Inorganic Analysis

b- Reaction with BaCI2 solution:Only fluoride gives a white gelatinous ppt. when BaCI2 reagent is

added to sample solution. Ba+++ 2F- BaF2

The white gelatinous BaF2 ppt. is partially soluble in dil. HCI or

HNO3

No ppt. is formed in case of other halides.c- Reaction with FeCI3:Add few drops of FeCI3 reagent to concentrated sample solution .

1 -F- : a white crystalline ppt. of the complex salt, which is sparingly soluble

in water Fe3++ 6 F‑ [FeF6]3-

2- CI- and Br- : do not react with FeCI3 3- lodide reacts with FeCI3, due to its strong reducing action with

the liberation of I2.

d- Reaction with lead acetate

Precipitates of Pbx2 are formed in cold solution when lead acetate reagent is added to sample solutions.

Page 39: Qualitative Inorganic Analysis

F-, Cl- and Br- form a white ppt with lead acetate, sparingly soluble in cold more soluble in hot water, crystallize on cooling

Pb+++ 2 F- PbF2 Pb+++ 2 CI-

PbCI2 Pb+++ 2 Br- PbBr2

Iodide forms a bright yellow ppt of PbI2 which is soluble in hot water and crystallizes on cooling as golden spangles.

e- Chlorine water test:

Iodide react first with chlorine water before bromide as it has more reducing character.

Chlorine water oxidizes I- and Br- into I2 and Br2 which can be extracted with chloroform or carbon tetrachloride as violet color or brown or yellow color of I2 and Br2, respectively.

Chloride and Fluoride do not react with chlorine water .

Page 40: Qualitative Inorganic Analysis

Chlorine water reagent is added drop wise to a solution of iodide or bromide as excess chlorine water converts Br2 into yellow bromine monochloride or into colorless hypobromous acid or bromic acid and the organic layer turns pale

yellow or colorless. Also, excess chlorine water oxidized I2 to colorless iodic acid.

2Br-+ CI2 Br2+

2CI- Br2+ CI2 2 BrCI

(yellow)Br2+ CI2 (excess) + 2H2O

2HOBr+2HCI

Br2+ 5CI2 (excess) + 6H2O 2

HBrO3+10HCI

bromine monochloride

hypobromous acid

bromic acid

Colorless

2I- + CI2 I2+ 2CI-

I2+ 5CI2 (excess) + 6H2O 2 HIO3+10HCI

iodic acid

Page 41: Qualitative Inorganic Analysis

III. Special Tests1 -For Fluorides:

Boron fluoride test:When fluoride is mixed with borax and moisten with conc. H2SO4.

The formed HF and boric acid react to produce boronfluoride gas. If the mixture introduced into the flame tinged green by BF3 gas.

Na2B4O7+ H2SO4+ 5H2O

4H3BO3+Na2SO4

Borax boric acid2NaF+ H2SO4 2HF +

Na2SO4

H3BO3+ 3HF BF3+ 3H2O

2- For chlorides:

Chromyl chloride test:This test is a specific test for chloride even in the presence of other halides. It's classified as dry reactions test because, it is carried out

on the solid sample:

Page 42: Qualitative Inorganic Analysis

The solid chloride is mixed with three times its weight of powdered potassium dichromate in a tube, an equal bulk of concentrated

sulphuric acid is added, the tube is attached to another tube by a pent tube, dipped into a NaOH solution. The deep red vapors of chromyl

chloride CrO2CI2 which are evolved are passed into sodium hydroxide

solution. The resulting yellow solution in the test tube contains sodium

chromate; this confirmed by perchromic acid test, which is carried out by

acidifying with dil. H2SO4, adding 1-2 ml alcohol or ether, followed by a little

H2O2 solution. The organic layer is colored blue.

4CI-+ Cr2O7--+ 6H+ cond. 2CrO2 Cl2 + 3H2O

CrO2CI2 + 4OH- CrO4-- + 2CI- + 2H2O

2 CrO4-- + 2H+ Cr2O7

--+

H2O Cr2O7--+ 7H2O2 2 CrO8

3-+ 5H2O +

4H+

Blue in ether or amyl alcohol

It is possible to test for CrO4--also by lead

acetate CrO4--+ Pb++ Pb

CrO4

Yellow

Page 43: Qualitative Inorganic Analysis

N.B.1- Some CI2 may also be liberated owing to the reacting.

6CI- + Cr2O7--+ 14H+ 3CI2+ 2Cr3++ 7H2O

and this decreases the sensitivity of the test.2- Fluorides give rise to the volatile CrO2F2 which is decomposed by water,

and hence should be absent or removed.

3- Nitrites and nitrates interfere, as nitrosyl chloride may be formed.

4- Bromides and iodides give rise to the free halogens, which yield colorless or pale yellow solution with NaOH.

6 Br-+ Cr2O7--+ 14H+ 2 Cr3++ 3Br2+

7H2O6 I-+ Cr2O7--+ 14H+ 2Cr3++ 3I2+

7H2OBr2+ 2OH- OBr-+ Br-+ H2O

(hypobromide)

I2+ 2OH- OI-+ I-+ H2O (hypoiodide)

Page 44: Qualitative Inorganic Analysis

3- For iodides:A) lodide is readily oxidized in acid solution (dil. H2SO4) with nitrite

solutionor H2O2 into free l22I-+ 2NO2

-+ 4H+ I2+ 2NO +

2H2O2I-+ H2O2+ 2H+ I2+ 2H2O

B) I- reacts with Cu++ forming a whit ppt. of Cu2I2, the I- being oxidized

to free I2. Thus a white ppt. in brown solution is formed on treating I-

with CuSO4 solution. 2Cu+++ 4I- Cu2I2 +I2

C) I- reacts with mercuric chloride solution mercuric iodide HgI2 will be precipitated as yellow-scarlet red ppt. which dissolves in excess iodide

forming soluble colorless complex. HgCI2+ 2I- HgI2 + 2CI-

Scarlet red HgI2+ 2I- (HgI4)2-

Soluble complex

Nessler's reagent

Page 45: Qualitative Inorganic Analysis

IV. Analysis of Mixtures

1- Mixture of F-, Cl-, Br- and I- :

a) The F- is separated by treating the mixture solution acidified with CH3COOH with Ba(NO3)2 or Ca (NO3)2

Centrifuge

White PPt. Centrifugate BaF2 CI‑, Br- and I-

Confirmed by Conc.H2SO4 test

b) for the centrifugate ( Cl-, Br- and I-), carry out chlorine water test for both I- and Br – ( or get rid of I- by oxidation to I2 using H2O2 or nitrite and

extract I2 by chloroform then test for Br- in aqueous solution

c) For CI-, carry out chromyl test on a solid sample.

Page 46: Qualitative Inorganic Analysis

2- Mixture of chlorine / chloride and Br2 / Br- :

Chlorine is tested for by its smell, bleaching effect, while Br2 is tested by shaking with chloroform, it give brown color. CI- and Br-could be tested after removal of chlorine and bromine by shaking with metallic mercury (till the smell of CI2 disappears and the liquid doesn't bleach litmus paper). Insoluble Hg2CI2 and/or Hg2Br2 are formed. Test for CI- and or Br- in the clear supernatant (centrifugate(.

CI2+ 2Hgo Hg2CI2

Br2+ 2Hgo Hg2Br2

3- Mixture of chloride and iodide :

Add AgNO3 to the mixture, AgCl and AgI are precipitated. Add to precipitate dil ammonia solution and filter

Filterate Cl -

Confirmed by chromyl chloride testPrecipitateYellow ppt. I-

Page 47: Qualitative Inorganic Analysis

Cyanogen anions

This group of anions, are;1- Cyanide (CN-)

2- Thiocyanate (SCN-)3- Ferrocyanide [Fe(CN)6]4-

4- Ferricyanide [Fe(CN)6]3-

All cyanide containing anions are highly poisonous. In all experiments inwhich the gas is likely to be evolved or those in which cyanides are

heated, should be carried out cautiously in the fume cupboard.

I. General characters

1 -Parent Acids:a) Hydrocyanic acid: HCN It's very poisonous. It's colorless volatile liquid (B.P. 26.5oC). It has an

odor of bitter almonds. It is not stable in solution due the formation of ammonium formate. Any dil. mineral acid can replace HCN in its solution .

Page 48: Qualitative Inorganic Analysis

On passing CO2 to CN- solution HCN is produced with HCO3-.

CN-+ CO2+ H2O HCN + HCO3-

b) Thiocyanic acid: HSCN It is colorless toxic liquid (B.P. 85oC) with unpleasant odor. It is as strong as HCI but unstable. It is soluble in ether after the

addition of HCI to an aqueous solution of SCN-.On standing its aqueous solution is decomposed to HCN and yellow solid polymer.

3 HCNS HCN + H2N2C2S3

c) Ferrocyanic acid: H4 [FeCN)6]

It's white crystalline solid. Its aqueous solution is strongly acidic.The first two protons are nearly completely ionized.

d) Ferricyanic acid: H3 [Fe(CN)6]

It's browinish crystalline solid, soluble in water to give strongly acids solution. The three protons are nearly completely ionized.

Page 49: Qualitative Inorganic Analysis

2-Solubility:CN-: All cyanides are water insoluble except alkali metals (Na+, K+),

ammonium salt, alkaline earth metals ( Ba2+, Sr2+ and Ca2+) and mercuric cyanide.

SCN-: All thiocyanates are water soluble except AgSCN, Hg2(SCN)2 & Cu2 (SCN)2. Pb (SCN)2 as PbCI2 is sparingly soluble in cold water, but soluble in hot water.

Ferro and Ferricyanides:All are insoluble in water except those of alkali metals, ammonium salt and alkaline earth metals.3-Complexing agent: Cyanide ion has strong tendency to the formation of complexes which may be double cyanides or complex cyanides.

1- Argentocyanide complexes: Double cyanidesWhen a ppt. is formed upon reacting CN- with Ag+, at first white turbidity is formed which is AgCN. According to the medium, if CN- ions are present in excess a soluble complex is formed.

AgCN + CN- (Ag (CN)2)-

Page 50: Qualitative Inorganic Analysis

2- Complex cyanides:Stable metallo-cyanogen complexes can be formed by reacting FeSO4

with CN- in alkaline medium to give stable ferrocyanide complex. Similar complex is formed with Fe3+ to give ferricyanide. Therefore [Fe(CN)6]

4- and [Fe(CN)6]3- are considered to be stable complexes

from CN- ions. Also Co++ can form stable complexes with CN-. Fe2++ 6 CN- [Fe(CN)6]

4- Fe3++ 6CN- [Fe(CN)6]3-

When cyanides are heated with polysulphides (NH4)2Sx or thiosulphate (S 2O3--)

they give thiocyanate ion

CN-+ (NH4)2Sx (NH4)2Sx-1+ SCN-

CN-+ S2O32- SO3

--+ SCN-

4-Oxidizing agent: Ferricyanides has oxidizing effect, they can oxidizes I- into I2

5-Reducing agent:

Ferrocyanides has mild reducing effect, they can be oxidized to ferricyanideby oxidizing agents, such as MnO4

-, NO3-, H2O2 and Cl2

Page 51: Qualitative Inorganic Analysis

II. General Reactions

1- Dry Reactionsa- Action of dilute HCl

a) CN-:HCN gas evolved with characteristic bitter almond odor and can be tested

by:1- Converting HCN evolved into SCN-, by exposing the evolved HCN gas to a paper moistened with ammonium polysulphide.The resulted SCN- can be tested by adding dil. HCI and a drop of FeCI3 solution, a blood red color is produced.2- By passing the evolved gas into AgNO3 solution, a white ppt. of

AgCN is formed insoluble in dil. HNO3, soluble in ammonia solution. HCN + AgNO3 AgCN +

HNO3

AgCN + 2NH3 (Ag(NH3)2)CN3- Prussian blue test: The evolved HCN gas is passed into NaOH solution, add drops of FeSO4 solution, heat to boiling, the HCN is converted into ferrocyanide which can be tested by adding drops of FeCl3 solution to produce a prussian blue ppt.

Page 52: Qualitative Inorganic Analysis

b) SCN-: No reaction as SCN- is as strong as HCl

c) Ferrocyanide and Ferricyanide:With cold dil. HCI, no gases, but may be precipitation of hydro

ferrocyanic and hydroferricyanic acid occur. (Fe(CN)6)

4-+ 4H+

H4(Fe(CN)6)(Fe(CN)6)

3-+ 3H+ H3(Fe(CN)6)

b- Action of conc. H2SO4:

a) CN- ; All cyanides are decomposed on heating.

CN+ -2H++ H2O NH4+ +CO

b) CNS-: Decomposition with evolution of carbonyl sulphide, which burns with a blue flame.

SCN-+ 4H++ 2SO4--+ H2O

NH4++ 2HSO4

-+COS

Carbonyl Sulphide

Page 53: Qualitative Inorganic Analysis

On heating with conc. H2SO4, CO will be evolve which burns with a blue

flame. SO2 is produced in case of ferrocyanide.

c) Ferrocyanide and Ferricyanide:

2Fe2++ 4H++ SO4-- SO2+ 2H2O + 2Fe3+

( Fe(CN)6)4-+ 6H2O +22H++ 10 SO42- Fe2++6NH4

++ 10 HSO4-+ 6

CO

(Fe(CN)6)3-+ 6H2O + 22H++ 10 SO4

2- Fe3++ 6NH4

++ 10 HSO4-+ 6CO

2 -Wet Reactions

a- Silver nitrate solution:

1- CN- & SCN- : form white ppts. of silver cyanide and silver thiocyanate. AgCN is soluble in excess CN-, ammonia solution, but insoluble in dil. HNO3

Ag++ SCN- AgSCN

Ag++ CN- AgCN CN- (Ag(CN)2)-

H+

HCN+ AgCN

Page 54: Qualitative Inorganic Analysis

2- Ferro- and Ferricyanides:Both [Fe(CN)6]4-and [Fe(CN)6]3- react with AgNO3 solution with

the formation of a white ppt. and orange red ppt., respectively

4 Ag++ [Fe(CN)6]4- Ag4[Fe(CN)6]

Insoluble in dil. ammonia Insoluble in dil. HNO3

3 Ag++ [Fe(CN)6]3- Ag3[Fe(CN)6]

Orange red ppt. Insoluble in dil. HNO3

Soluble in dil. ammonia

The solubility of silver ferricyanide ppt. can be used for the separation of ferrocyanide and ferricyanide when present in a mixture. Oxidation of

the white ppt. of Ag4 [Fe(CN)6] by warming with few drops of conc. HNO3, leads to orange red ppt. of Ag3 [Fe(CN)6] which becomes soluble in

dil. ammonia solution.

b) Reaction with BaCI2: No observed reaction

Page 55: Qualitative Inorganic Analysis

c) Reaction with FeCI3: This reaction is very important, since it is diffrantiating reaction.The diluted sample solution is added to a 1ml of FeCI3 reagent.

1- CN-: iron (III) cyanide will be formed form dil. solution as a ppt. which is dissolved in excess cyanide forming ferricyanide.

Fe3++ 3 CN- Fe (CN)3

[Fe(CN)6]3-

Ferricyanide

3CN-

2- SCN-: This reaction is specific for iron(III) and SCN- in the absence of other interfering ions.

A cold acidic solution of SCN- is treated with FeCI3 reagent, a blood red color is produced which is extractable with ether.

The formed color is subjected to have the following structures:

Fe3++ SCN- [Fe(SCN)]++ or Fe(SCN)3 or [Fe(SCN)6]3-

In order to increase the sensitivity of the test the following precautions must be done:

1.Ensure the presence of iron in the Fe3+ state.

Page 56: Qualitative Inorganic Analysis

2- Acidification of the medium (dil. HCI is preferable).3- Cooling of the solution befor testing.4- Removal of intreferring ions by precipitation or complexation.

F-, PO43- , oxalate and tartrate bleach the colour, therefore it must be absent

F- for e.g, reacts with iron to form stable complex. 6 F-+ Fe3+ (FeF6)3-

other ions which react with SCN- e.g, Hg2+ which form unionized Hg (SCN)2

which is colorless.

Iodides also interferes by being oxidized by Fe3+ into the brown colour I2. 2I-+ 2Fe3+ H+ I2+ 2Fe2+

3- Ferro and Ferricyanides:

A Prussian blue characteristic ppt. is formed form acidic solution of [Fe(CN)6]

4-, which is insoluble in dil. HCI, but soluble in alkali hydroxide. 3[Fe(CN)6)

4-+ 4Fe3+ Fe4[Fe(CN)6]3 Prussian blue

In case of Ferricyanide, a brown color is formed of the non-ionised ferricyanide

Fe3++ [Fe(CN)6]3- Fe[Fe(CN)6] Brown color

This test can be used to differentiate between ferro and ferricyanide

Page 57: Qualitative Inorganic Analysis

d) Reaction with FeSO4 reagent:

1- CN-: Cyanide forms with FeSO4 solution a yellow brown ppt. at first which is then form ferrocyanide, this reaction is enhanced by

heating or addition of alkali.

2CN-+ Fe2+ Fe(CN)2 4CN- [Fe(CN)6]4-

2 -SCN-: No reaction.3- Ferri and Ferrocyanide: Ferricyanide forms with FeSO4 reagent a similar blue ppt. (turnbulls blue), as that of Prussian blue, but differ

in the distribution of iron-different oxidation state is varied.

[Fe(CN)6]3++ Fe2+ Fe3++ [Fe(CN)6]4- Turanbull's blue Prussian blue

Ferrocyanide forms white ppt. of ferrous ferrocyanide.

2K++Fe+++ [Fe(CN)6]4- K2Fe[Fe(CN)6]

Page 58: Qualitative Inorganic Analysis

e- Reaction with CuSO4:

To the sample solution, add CuSO4 reagent dropwise.

1- CN-: In acidic medium, CN- likes I-, reacts with Cu++ which oxidizes CN- into cyanogens (CN)2 or cyanate CNO- (in alkaline medium).

Cu+++ 2CN- Cu(CN)2 Greenish

yellow2CU (CN)2 Oxid-red Cu2 (CN)2 + (CN)2

white cyanide cyanogen Cu2(CN)2 + 4CN- 2 (Cu (CN)3)

2-

Excess cuprocyanide complex SolubleAs a conclusion of this reaction, cupric ions react with excess

cyanide to form soluble complex cuprocyanide and cyanogen.

2Cu+++ 8CN- 2[Cu (CN)3]2-+ (CN)2

In alkaline medium cyanogen is converted to CN- & cyanate CNO-.

(CN)2+ 2OH- CN-+ CNO-+ H2O

Page 59: Qualitative Inorganic Analysis

2- SCN-: Thiocyanate reacts with CuSO4 reagent, to form a green color

which changes into a black ppt Cu (SCN)2 with excess CuSO4

reagent Cu (SCN)2 decomposes gradually to white cuprous thiocyanate Cu2(SCN)2 and separation of thioyanogen as a gummy mass

Cu+++ SCN- Cu (SCN)2 2 Cu (SCN)2 unstable Cu2 (SCN)2+ (SCN)2

decomposition white gummy mass3- Ferro and Ferricyanides:

Both ferro and ferricyanides form brown and green ppts. of copper ferro

and copper ferricyanides, respectively. Both ppts. are insol. in dil. acids [Fe(CN)6]

4-+ 2Cu++

Cu2[Fe(CN)6]

Brown2 [Fe(CN)6]

3-+ 3Cu++

Cu3[Fe(CN)6]2

green

Page 60: Qualitative Inorganic Analysis

f- Reaction with Cobalt Nitrate:To the sample solution, add excess Co(NO3)2

reagent.1- CN-: A buff ppt., of cabaltous cyanide dihydrate is formed, which is

soluble in excess CN- to form soluble complex, cobaltocyanideCo2++ 2CN-+ 2H2O Co (CN)2. 2H2O

[Co (CN)6]4-

soluble complex.

4CN-

2- SCN-: Vogel's ReactionThe reaction of Co++ with SCN- to produce a characteristic blue

color extractable with ether or amyl alcohol; known as vogel's reaction. Other cyanogen anions form precipitates with Co (NO3)2 reagent. Co2++ 4SCN- [Co (SCN)4]

2-

Extractable with ether (blue)3- Ferro and Ferricyanide:

Both form greyish green and red ppts. of cobalt ferrocyanide and

cobalt ferricyanide.2 Co2++ [Fe(CN)6]

4-

Co2[Fe(CN)6]

greyish green

3 Co2++ 2[Fe(CN)6]3-

Co3[Fe(CN)6]2

red ppt.

Page 61: Qualitative Inorganic Analysis

III. Special Tests

1- For Cyanides:a) Prussian blue test: This test is specific for CN- which can be converted into ferrocyanide and allowed to react with Fe3+.

b) Iron thiocyanate:This test for CN- depends on the direct combination of alkali cyanides with sulphur (ammonium polysulphide). A blood red coloration is produced upon addition of FeCI3 reagent. This blood red color is extractable with ether. This test is applicable to CN- in presence of S2- or SO3

2-; if SCN- is originally present, the CN- must be isolated first by precipitation e.g. as zinc cyanide.

2- For thiocyanate: a)Reduction Test: This reaction depends on the reduction of SCN- with metallic zinc and dil. acid into H2S and HCN which can tested for.

Zno+ 2H+ 2 (H) + Zn2+

2SCN- +4(H) 2 HCN + H2S+ S--

b) Vogel’s reaction

Page 62: Qualitative Inorganic Analysis

3- For ferrocyanides: As mild reducing agents:It can be oxidized to ferricyanide by oxidising agents, such as, MnO4

-, NO3

-, H2O2 and CI2.

2[Fe(CN)6]4-+ CI2 2[Fe(CN)6]

3-+ 2CI-

4- For Ferricyanides:As oxidizing agents:For example, [Fe(CN)6]3- can oxidizes I- into a brown colored I2

which identified by starch or CHCI3.

IV. Analysis of Mixtures

2[Fe(CN)6]3-+ 2I- 2[Fe(CN)6]

4-+I2

1 -Mixture of CN-, SCN-, [Fe(CN)6]4- & [Fe (CN)6]3-

CN- must be tested at first, then removed from the mixture. This is done depending on its strong affinity to protons, low ionization and volatility

of HCN.

Page 63: Qualitative Inorganic Analysis

The following procedure could be applied.a- Passing CO2 in the mixture solution using acetic acid or NaHCO3 and heat, until no more HCN evolved which can be confirmed by:i- Passing in AgNO3 solution acidified dil. HNO3 which gives a white ppt.ii- Passing in NaOH, adding FeSO4 solution heating, followed by HCI then FeCI3 solution (Prussian blue).b- To the remaining solution, after removal of CN-, acidify with dil. HCI, cool and add FeCI3 solution and centrifuge

Deep blue ppt.

[Fe (CN)6]4-

Centrifugate

blood red color extractable with ether SCN-

brown solution

SnCI2

blue ppt .

[Fe (CN)6]3-

Page 64: Qualitative Inorganic Analysis

2 -Mixture of SCN-, CI-, Br- and I-SCN- is tested for by reacting with FeCI3, to give blood red color which is extractable with ether and removed. In presence of I-, I2 is also formed

which can be extracted with CHCI3 (Violet color).

The blue complex formed with Co2+ can also be used to detect and remove

SCN- by extraction with ether or amyl alcohol.

The halides are tested for in the usual way after the removal of SCN-, since it interferes with their precipitation. After testing for SCN-, it is removed by igniting the mixture till no more blackening or no odor of burnt sulphur is observed.

The residue will contain only CI-, Br-, I-, and test for CI- by chromyl chloride

test for I- and Br-, carry out chlorine water test.

Page 65: Qualitative Inorganic Analysis

Arsinic and phosphorous containing anions

This group of anions, are;1- Arsenate (AsO4

3-) 2- Arsenite (AsO3

3-)3- Phosphate (PO4

3-)

I. General characters

1 -Parent Acids:

a) Orthoarsenic acid: H3AsO4

Its aqueous solution is a moderately strong acid, slightly weaker than phosphoric acid. It has the tendency for condensation and formation of pyroarsenic acid, H4As2O7, and meta-arsenic acid, HASO3 by gentle heating.

2H3AsO4 H4As2O7 2HAsO3+H2O +H2O

-H2O -H2O

(Orthoarsenic acid) (Pyro arsenic acid) (Meta arsenic acid)

Page 66: Qualitative Inorganic Analysis

Arsenic acid and arsenate ion are mild oxidizing agents.Three series of arsenates exist, the primary arsenate H2AsO4

-, the secondary arsenate (HAsO4

2-) and the tertiary arsenate (AsO4

3-).

b) Arseneous acid: H3AsO3 It exist in aqueous solutions, cannot be isolated as such because

of thermal decomposition to the anhydride, As2O3, sometimes written as As4O6. The oxide is slightly soluble in water yielding ortho arsenious acid

and meta arsenious acid.

As4O6+ 6H2O 4H3AsO3 4HAsO2+ 4H2O

)ortho arsenious acid) (meta arsenious acid(

Two series of salts of arsenites exist, orthoarsenites H2AsO3-,

meta arsenites AsO2-, both respond similarly to different reactions.

**[Arsin-containing acids and salts are highly poisonous]**

Page 67: Qualitative Inorganic Analysis

Reduction of As5+ and As3+:Pentavalent arsenic salts, or anions containing, can be reduced first to

the trivalent arsenous, or the corresponding anion containing it, and finally to the metalic form.

As5++ 2e As3++ 3e Aso

The reduction can be made using reducing agents with lower redox-potential e.g. saturated solution of stannous chloride, a powerful reducing agent in the

presence of conc. HCI.

As5++ Sn2+ Sn4++ As3+

2AS3++ 3Sn2+ 3Sn4++ 2Aso (H+)

(OH-)

c) Orthophosphoric acid: H3PO4

It is crystalline solid, its aqueous solution is acidic & ionises into:

H3PO4 H++ H2PO4- [dihydrogen phosphate]

H2PO4- H++ HPO4

2- [monohydrogen phosphate]HPO4

2- H++ PO43- [tribasic phosphate]

Page 68: Qualitative Inorganic Analysis

The intermolecular loss of water from two molecules of orthophosphoric acid, will give pyrophosphoric acid (H4P2O7) and metaphosphoric acids

(HPO3).

Orthophosphoric acid forms three series of salts in which one, two or threehydrogens are replaced by metals, for example, NaH2PO4, Na2HPO4 and Na3PO4. these salts are known respectively as primary, secondary and tertiary orthophosphates.The aqueous solution of the primary salt is acid, that of the secondary is slightly alkaline while in the case of the tertiary salt, the solution is strongly alkaline.

2-Solubility:

All their salts are insoluble in water except those of Na+, K+ and NH4+ beside

the alkali dihydrogen salts as Ba(H2AsO4)2

3- Redox-reaction with I2/I-: Aresnate has oxidizing effect and aresnite has reducing effect

Arsenate (AsO43-) ions oxidises iodide into iodine; but the redox reaction is

reversible due to the narrow difference in Eo values of the two redox systems.

Page 69: Qualitative Inorganic Analysis

AsO43- +2H++ 2I- AsO3

3- + H2O +I2 H+

NaHCO3

Arsenate oxidise iodide into iodine in acid medium, while arsenite (mild reducing agent) reduces iodine into iodide in alkaline medium.

II. General Reactions

1- Dry Reactionsa- Action of dilute HCl

No visible reaction, since phosphates, arsenates and arsenite acid arenon volatile.

b- Action of conc. HCl1 -PO4

3- : no visible reaction

2- AsO43-:On hot arsenate ion oxidises HCI into free CI2, while it will be

reduced to arsenite

2CI-+ AsO43-+ 4H+ CI2 +AsO2

- + 2H2O

Page 70: Qualitative Inorganic Analysis

3 -AsO33- : Arsenite will react and vapour of arsenious chloride is evolved.

AsO2-+ 3CI- + 4H+ AsCI3 + 2H2O

c- Action of conc. H2SO4

1 -PO43- and AsO4

3-: no visible reaction

2 -AsO33- : Arsenite on heating, some reduction to SO2 may occur .

2 -Wet Reactions

a- Silver nitrate solution:3Ag++ PO4

3- Ag3PO4 (yellow ppt)

3Ag++ AsO43- Ag3AsO4 (chocolate ppt.)

3Ag++ AsO33- Ag3AsO3 (yellow ppt.)

All the precipitates are soluble in dil. HNO3 due to the fact that the corresponding acids (phosphoric, arsenic and aresnious acids) are weaker than nitric acid in the presence of which they yield lower concentration of their ions insufficient to precipitate their silver salts

Page 71: Qualitative Inorganic Analysis

All the precipitates are soluble in ammonia solution, due to theformation of the complex ion [Ag (NH3)2]+, which yields lower

concentration of silver ions insufficient to precipitate their silver salts.

3Ag++ 6NH3 3[Ag(NH3)2]+

These precipitates are insoluble in acetic acid.

b) Reaction with BaCI2:

White precipitates of the secondary salt (BaHPO4, BaHAsO4, BaHAsO3) from neutral medium, or of the more insoluble tertiary salt (Ba3(PO4)2,

Ba3(ASO4)2 or Ba3(AsO3)2) from ammoniacal or dilute alkaline solutions. The precipitates are soluble in dilute acids including acetic acid.

c) Reaction with Magensia Mixture:Magnesia mixture reagent is formed of MgCI2, NH4CI and NH4OH

[Mg2+, the precipitating ions, NH4OH, to render the medium ammoniacal; NH4CI, to reduce OH- concentration by common ion effect to be

insufficient to ppt. Mg (OH)2]. The reagent solution form white crystalline precipitate with phosphates and arsenates in neutral or ammoniacal solution.

The precipitate is soluble in acetic acid and in mineral acids. No precipitate is formed with arsenites.

Page 72: Qualitative Inorganic Analysis

PO43-+Mg2++ NH4

+ Mg (NH4) PO4

[magnesium ammonium phosphate]AsO4

3-+ Mg2++ NH4+ Mg(NH4)AsO4

[magnesium ammonium arsenate]

If the white precipitates are treated with AgNO3 (in acetic acid medium), that of the phosphate will be transformed into yellow ppt. while that of the arsenate into chocolate ppt. due to the transformation to the less

soluble Ag3PO4 and Ag3AsO4 respectively.

d) Reaction with ammonium molybdate:The addition of a large excess (2-3ml) of this reagent in conc. HNO3 to a small volume (0.5ml) of the test solution acidified with HNO3 and

heat gradually, produces a canary yellow crystalline precipitates ofammonium phosphomolybdate (NH4)3PO4. 12MoO3 (on warming to 40oC)

and of ammonium arsnomolybdate (NH4)3 AsO4. 12MoO3 (on boiling)in case of phosphates and arsenates respectively.

No precipitate is formed with arsenites. The precipitates are soluble in ammonia or alkali hydroxides,

in excess phosphates or arsenates respectively and on boiling withammonium acetate solution, insoluble in HNO3.

MoO3 produced from the action of acid on ammonium molybdate.

Page 73: Qualitative Inorganic Analysis

(MoO42-)+ 2H+ H2MoO4

3 NH4++ 12 MoO3+ PO4

3-

3NH4+ + 12 MoO3+ AsO4

3- (NH4)3ASO4.12MoO3

MoO3+ H2O

(NH4)3PO4.12MoO3

Chloride and reducing agents, such as S2-, SO32-,[Fe(CN)6]4- and tartarates,

seriously affect the reaction, and should be destroyed before carrying out the test.

e) Reaction with H2S:

Acidify the test solution with dilute HCI and pass H2S. No precipitate is formed in case of phosphate.Aresnites, produce immediate yellow ppt. of arsenious sulphide As2S3.The ppt. is soluble in HNO3 and alkali hydroxides insoluble in hot conc.

HCI. 2HAsO2+ 3H2S As2S3 + 4H2O

Page 74: Qualitative Inorganic Analysis

Arsenates, not produce any immediate visible change, but after prolongedpassage of H2S, yellow ppt. of AS2S3 is produced. It is evident that the firstaction of H2S is to reduce the arsenate into arsenite through the formationof thioarsenate ion H2AsO3S- which decomposes slowly arsenious acid and suphhur.

H2AsO4-+ H2S H2AsO3S

-+ H2O

H2AsO3S-+ H+ HAsO2+ H2O +S

2HAsO2+ 3H2S As2S3 + 4H2O

If the acid concentration is high and the strean of H2S is rapid,no preliminary reduction to arsenite occurs and arsenic pentasulphide

precipitate (As2S5) is produced.

2H2AsO4-+ 5H2S +2H+ As2S5 +8H2O

However, if the solution is heated under the same conditions, mixture of As2S3 and As2S5 is formed.

Page 75: Qualitative Inorganic Analysis

f) Reaction with CuSO4 solution:Phosphates and arsenates form bluish-green ppt. of the cupric

phosphateor arsenate, CuHPO4, or CuHAO4, respectively. On adding an excess of NaOH, the ppt. assumes a pale blue color but dose not dissolve, and on boiling no red ppt. is produced.The ppt. is soluble in mineral acids and in ammonia.Aresnites from yellowish green ppt. of copper arsenite CuHAsO3 from

thesample solution just alkaline with NaOH. The ppt. is soluble in excessNaOH to give deep blue color of CuO.HAsO2. On boiling red ppt. is

formeddue to the reduction of CuO into cuprous oxide (Cu2O), the arsenious

acidis simultaneously partially-oxidised to arsenic acid.

Cu2++ AsO2-+ OH- CuHAsO3=[CuO.HAsO2]

2[CuO.HAsO2]+H2O Cu2O + H3AsO4+HAsO2

g) Uranyl acetate solution:

Light yellow, gelatinous precipitate of uranyl ammonium phosphate Uo2(NH4) PO4 or arsenate UO2 (NH4) AsO4 in case of phosphates andarsenates repectively, in the presence of excess ammonium acetate.The precipitate is soluble in mineral acids, but insoluble in acetic acid.

Page 76: Qualitative Inorganic Analysis

This test provides an excellent method of distinction of phosphate andarsenate from arsenite, which does not give a precipitate with the reagent.

PO43-+ UO2

2++ NH+4 UO2(NH4)PO4

AsO43-+ UO2

2++ NH4+ UO2(NH4) AsO4

III. Special Tests

1- For phosphate: Magnesium test: It depends on reduction of the stable phosphates into phosphide (P3-) ,by mixing with magnesium powder and heat in an ignition tube. Moisten the cold mass with water, phosphine gas (PH3) is produced which has

unpleasant odor and is inflammable .PO4

3++ 4Mg (heat) 4MgO +

P3-

P3-+ 3H2O PH3 + 3OH-

Page 77: Qualitative Inorganic Analysis

2- For arsenate: Potassium iodide test: To the test solution (2ml) add 1 ml of chloroform, 3ml KI solution and 5ml conc. HCI. Shake

vigorously and allow to settle, a violet color of free iodine appears in the organic layer.

AsO43-+ 2I-+ 4H+ ASO2

-+ I2+ 2H2OHCO3

-

H+

The test can be used for the detection of arsenate in presence ofphosphate and arsenite (in absence of other oxidizing agents).

3- For arsenite:a) Iodine test: Add 0.5 ml of saturated NaHCO3 solution to 3 ml of the sample

solution.Add few drops of I2 solution. The brown color of I2 disappears

immediatelydue to the reducing effect of arsenite. This reaction is the reverse of

thatfor arsenate. In absence of other reducing agents this test can be used

todistinguish arsenite from arsenate or phosphate.

Page 78: Qualitative Inorganic Analysis

b) Bettendorf's test: A few drops of the test solution are added to 4ml of conc. HCI, and 1

ml of saturated stannous chloride solution is added. The solution is gently warmed; it becomes drak brown and finally black ppt. of arsenic is

formed. Strong reducing agents as SnCI2 reduce arsenite in presence of conc.

HCIto elemental arsenic.3 Sn2++ 8H++ 2AsO2

- (heat) 2As +3Sn4++ 4H2O

This test is also positive with arsenates, being first reduced into arsenites. However, the test can be made use of to establish the presence of

arsenic-containing anions.c) Marsh's reaction: [ for small amounts of arsenic.] In acidic solution arsenic (III) and (V) compounds are reduced by hydrogen to the poisonous hydrogen arsenide gas (H3As) with garlic

like odor which when heated dissociates to elementary arsenic and

hydrogen:AsO3

3-+ 3Zno+ 9H+ H3As + 3Zn2++ 3H2O

(heat) 2H3As 2Aso + 3H2

Page 79: Qualitative Inorganic Analysis

IV. Analysis of Mixtures1 -Mixture of arsenite and arsenate:

Ammoniacal solution of the mixture + magnesia mixture & filter

White PPt. Mg(NH4)AsO4

Wash with dil Ammonia Solution+ AgNO3 acidified

With acetic acid

Chocolate brown ppt. of Ag3AsO4

Aresnate

Filtrate1 -Acidify with dil. HCI & Pass H2S

immediate yellow ppt. of As2S3 Arsenite

)or (2- Add 5-7ml of 30%H2O2 soI.+ magnesiamixture drop by drop (10ml) withstirring a white crystalline ppt.of Mg(NH4) AsO4 produced by

Oxidation of arsenite.

)or (3- Addition of NaHCO3 sat. sol.+fewdrops of I2 sol. The brown colour of I2

disappears arsenite

Page 80: Qualitative Inorganic Analysis

2- Mixture of arsenite and phosphate:

1- With magnesia mixture ( as the mixture of AsO33- and AsO4

3-) with the only exception that when the ppt. of Mg (NH4) PO4 treated with AgNO3 acidified with acetic acid, yellow ppt. of Ag3 PO4 is produced.OR2- Pass H2S in the solution of the mixture acidified with dil. HCI, immediate yellow ppt. of As2S3 indicates AsO3

3- filter. Drive off the excess H2S by boiling and test for phosphate by the general test (amm. molybdate).

3- Mixture of arsenate and phosphate:Dissolve in conc. HCI (10 ml), boil, pass H2S for 5 minutes.

Dilute with 25 ml H2O & filter.

Yellow ppt. of As2S5

Arsenate

Filtrate, evaporate to dryness, dissolve in conc. HNO3 add ammonium molybdate & warm canary yellow ppt. Phosphate.

Page 81: Qualitative Inorganic Analysis

4- Mixture of arsenite, arsenate and phosphate:

Ammoniacal solution + magnesia mixture & filter

White ppt of Mg (NH4) PO4 Mg (NH4) AsO4 Wash with dil ammonia Solution. Dissolve in conc. HCI.Boil & pass H2S; proceed exactly As mixture of PO4

3- and AsO43-

Filtratetest for AsO3

3-

as in mixture (1)

Page 82: Qualitative Inorganic Analysis

Nitrogen- containing anions

This group of anions, are;1- Nitrate (NO3

-) 2- Nitrite (NO2

-)

I. General characters

1 -Parent Acids:

a) Nitric acid: HNO3

Colorless liquid (B.P. 83OC), decomposes on aging to nitrogen dioxide (NO2). Its solution in water are strongly acidic.

4HNO3 4NO2 + O2 +2H2O

b) Nitrous acid: HNO2

The pure acid has never been isolated, due to its thermal instability.2HNO2 NO + NO2 + H2O

However addition of a strong acid to a solid nitrite or its solution in the coldyields a transient pale-blue liquid (due to the presence of free HNO2 acid or

its anhydride, N2O3) and the evolution of brown fumes of NO2.

Page 83: Qualitative Inorganic Analysis

2-Solubility:All nitrates are soluble in water. Also all nitrites are soluble in waterexcept AgNO2 which is slightly soluble.

3- Redox-reaction : The nitrate ion contains in its highest oxidation state of + 5, thus reactsonly as oxidizing agent, while nitrite ion contains nitrogen which has oxidation number + 3, it can therefore act either as a reducing or as oxidizing agent.

II. General Reactions

1- Dry Reactionsa- Action of dilute HClNo reaction case of nitrates, with nitrites, brown fumes of nitrogen

dioxide NO2 evolve and a transient pale blue liquid.

2NO2-+ 2H+ 2HNO2 NO + NO2 +H2O

2NO + O2 2NO2

Page 84: Qualitative Inorganic Analysis

H+ ions from dil. acids (including acetic acid) displace nitrous acid from its salts. The acid spontaneously decomposes to colorless monoxide NO &brownish NO2 gases. The brown fumes intensify when getting in contact

the atmosphere due to combination of NO with O2 of air.

b- Action of conc. H2SO4

Nitrate: Nitric acid is formed and some of it decomposed with evolution of brown fumes of NO2 with characteristic odor.

NO3-+ H+ HNO3

4HNO3 4NO2 + O2 + 2H2O

When copper turnings are added, and the mixture heated to boiling, the brown fumes of NO2 are increased due to the reduction of HNO3 by Cuo metal

which is oxidized to Cu2+ ions, which imparts a blue color to the solution.

2NO3-+ 4H++ Cuo 2NO2 + Cu2++ 2H2O

Nitrite: The reaction is the same as with dil HCI, but it takes place with considerable violence. On adding Cuo metal, the same occurs as

with nitrates.

Page 85: Qualitative Inorganic Analysis

2 -Wet Reactions

a) Reaction with Ag2SO4 solution:-

Nitrate: No ppt.Nitrite: White crystalline ppt. of AgNO2 form concentrated solutions.

NO2-+ Ag+ AgNO2

b) Reaction with BaCI2 solution: No precipitate is formed with either NO3

- nor NO2-

c) Reaction with KI solution:Acidify the test solution (3 ml) dil. H2SO4, then add Kl solution and few drops starch solution.Nitrate: No reaction.Nitrite: I2 is liberated imparting blue color to the starch.

2NO2-+ 2I-+ 4H+ 2NO + I2+ 2H2O

Page 86: Qualitative Inorganic Analysis

d) Reaction with Fe SO4 solution. (Brown Ring Test):Acidify the test solution (5ml) with dil. H2SO4, add (1ml) freshly

preparedFeSO4 solution.Nitrate: No visible change in case of using only dil. H2SO4, but on adding

conc. H2SO4 cautiously down the sides of the test tube, a brown ring is formed at the interface.Nitrite: Brown colour in the whole solution if FeSO4 solution is not cautiously added or a brown ring at the junction of the two liquids, if cautiously added.

FeSO4 reduces nitrate or nitrite ions to nitrogen monoxide, NO; nitrate ionis not reduced except in solutions containing a high H+ ion concentration,

that is conc. H2SO4. The excess Fe2+ ions then combines with the NOproduced to form the unstable brownish-black complex ion [Fe (NO)]2+,

readily decomposed by heat.

3Fe2++ NO3-+ 4H+ 3Fe3++ NO + 2H2O

Fe2++ NO2-+ 2H+ Fe3++ NO + H2O

Fe2++ NO [Fe (NO)]2+

Page 87: Qualitative Inorganic Analysis

This test differentiates NO3- ion from NO2

- ion, since the latter gives the brown ring in presence of dil. H2SO4 or even acetic acid, while NO3

-

ion dose not form the ring except in presence of conc. H2SO4. (NO2

-, I- and Br- ions will interfere)

III. Special Tests

1- For Nitrate: Ammonia test:

If solution of NO3- is boiled with Zno or Alo metals and NaOH solution,

NH3 will be evolved which can identified by its odor or with red litmuspaper (nitrites interfere).

NO3-+ 4Zno+ 7 OH- 3NH3 + 4[ZnO2]

2-+ 2H2O

zincate ions

3NO3-+ 8Alo+ 5OH-+ 2H2O 3NH3 + 8 [AlO2]

-

In acidic solution ( CH3COOH), nitrate can be reduced with Zno to nitrite.

Page 88: Qualitative Inorganic Analysis

2- For Nitrite: a) Permanganate test:

When a dilute potassium permanganate solution is added to an acidsolution of nitrite, its pink color is bleached. In this test, the

permanganate is reduced by the nitrite into colorless manganousSalt and the nitrite is oxidized into nitrate.

2MnO4-+ 5NO2

-+ 6H+ 2Mn2++ 5NO3-+ 3H2O

Pink colorless

b) Urea test: When a solution of a nitrite is treated with urea and the mixture

acidified with dilute HCl, the nitrite is decomposed, and N2 and CO2 are

evolved.CO (NH2)2+ 2HNO2 2N2 + CO2 +3H2O

c) Ammonium Chloride test:

By boiling a solution of a nitrite with excess of the solid reagent, N2 is evoled and the nitrite is completely destroyed.

NO2-+ NH+

4 N2 + 2H2O

Page 89: Qualitative Inorganic Analysis

d) Thiourea test: When a dil. acetic acid solution of a nitrite is treated with a little

thiourea, N2 is evolved and thiocyanic acid is produced. The latter may be

identified by the red color produced with dil. HCl and FeCl3 solution.

CS (NH2)2+ HNO2 N2+ H++ CNS-+ 2H2O

N.B: Thiocyanates and iodides interfere, and if present must be removed either with Ag2SO4 (solid) or dil AgNO3 solution.

IV. Analysis of Mixtures

1 -Mixture of Nitrate and Nitrite: Nitrite can be tested for in presence of nitrate (by treatment with dil HCI,

KI, KMnO4, FeSO4 in dil. H2SO4); and by the special tests for nitrite.Nitrate cannot be tested for in presence of nitrite, since nitrite gives all

the reactions of nitrate (conc. H2SO4, brown-ring test and ammonia test).Therefore nitrite be removed before testing for nitrate by:-

1- Decomposition of NO2- through its brown complex with FeSO4 formed in

dil. H2SO4 or acetic acid by heat and shaking.

[Fe (NO)]2+ heat NO + Fe2+

Page 90: Qualitative Inorganic Analysis

2- Decomposition of NO2- through its reduction to nitrogen by boiling with

NH4CI or warming with urea and few drops of dilute H2SO4 or warming with little sulphamic acid.

HO.SO2. NH2+ HNO2 N2 + H2SO4+ H2O

2- Mixture of Nitrate and Bromide or / and lodide:Br- and I- can be detected in presence of NO3

- by chlorine water test .NO3

- can be detected in presence of Br- and I- by the ammonia test .On the other, the brown ring test for nitrates cannot be applied in the presence of Br- and I-, since the liberation of free halogen with conc. H2SO4

will obscure the brown ring due to NO3-

Therefore Br- and I- must be first removed by either:1- Addition of saturated solution of silver sulphate, where AgBr and AgI are precipitated and then filtered off, the excess Ag+ is precipitated with Na2CO3

OR 2- Adding potassium persulphate and dil. H2SO4 and warming to about 80oC. The halogen is removed by boiling or extraction with organic solvent.

S2O82-+ 2Br- Br2+ 2SO4

2- S2O82-+ 2I- I2 + 2SO4

2-

The Halide-free solution is tested for NO3- by the brown ring test


Top Related