PRODUCTCATALOGUEPIPES / FITTINGS / FLANGES / FASTENERS / SPECIAL ITEMS
QUALITY CREATES CONFIDENCE
3
1.1
INDEX
Content
1 Introduction 1
2 Pipes 7
3 Tubing 23
4 Butt-weld Fittings 33
5 Forged Fittings 69
6 Flanges ASME B16.5 97
7 Spectacle Blinds, Spades and Spacers 133
8 Flanges API 6A 145
9 Flanges MSS SP-44 151
10 Flanges ASME B16.47 A-B 159
11 Outlets 169
12 Fasteners 185
13 Special Items 217
4
COMPANY PRESENTATION
The customers of Norwegian Piping are provided cost and time efficientprocurement of:• Pipes• Fittings• Flanges• Bolts and fasteners• Clamp connectors• Spring hangers and pipe supports• Special items • Other piping related products.
As a supplier and stockholder, we either deliver the products from our extensive stock in Korea and Norway, or directly from our broad network of manufacturers. In the latter case, Norwegian Piping ensures customer peace of mind through trouble free:• Expediting• Status reporting • Documentation/certifi ate handling • Logistics service.
Norwegian Piping holds frame agreements with companies such as Statoil, Kvaerner and Aker Solutions for supply of pipes, fittings, flanges and special ems. Since we fi st signed the agreement with Statoil in 2008, we have built thorough experience in delivering products according to Statoil TR2000/NORSOK requirements. Under this frame agreement, and for several years, Norwegian Piping has been a trusted partner for Statoil in qualifying manufacturers to their TR2000/NORSOK M-650 approved manufacturers list. Norwegian Piping is continuously seeking out new potential manufacturers to qualify to ensure fl xibility and competitive offers to our customers.
Over the years, Norwegian Piping has been awarded piping contracts by yards building topside installations for offshore oil and gas projects numerous times. Our global reach, experience and expertise have been further extended through our extensive portfolio of piping contracts to challenging subsea developments with demanding requirements and specifi ations.
Special items is a strategically important area of effort for Norwegian Piping. Since the start in 2004, our objective has been to be a trusted advisor for our customers within this area. Special items encompass a wide range of products and requires a rare combination of competence, knowledge and manufacturer relations to be able to serve and to build trust with the customers. Through successful deliveries of challenging special items packages and repetitive orders from customers, Norwegian Piping has earned the reputation as a reliable and trustworthy supplier in this field
DISCLAIMER:We have to the best of our ability quality controlled the information provided in this catalogue. However, we do not accept liability for any inaccuracies that may be present. Norwegian Piping appreciate feedback on any inaccuracies discovered to further improve the quality of this catalogue.
1.2
5
1.3
TYPICAL MANUFACTURING PROCESSES OF PRODUCING PIPES, FITTINGS AND FLANGES
Packing ready for shipment.
Raw material identifi ation and control
Heat treatment
Welding
Cleaning/Pickling and Passivation
Machining
Control and final inspectiondocumentation
Forming (Hot/Cold)
Sizing/Calibration
Quenching/ Water quenching
Destructive examination sampling for lab testing to specifi ation
Non-destructive examination (NDE)
Cutting of raw material, plate billet-bar
7
Content
2.1 Pipe Schedules (Inch) 8
2.2 Pipe Schedules (mm) 10
2.3 Line Pipes 12
2.4 Dimensional Tolerances 20
2PIPES
8
PIPE SCHEDULE CHART ¤MM¥PIPES2.1
ASME B36.10 ¦ B36.19 PIPE DIMENSIONS IN INCH AND WEIGHTS IN KG
NPS (Inch)
O.D. (Inch)
5 S 5 10 S 10 20 30STD 40 S
40 60XS
80 S80 100 120 140 160 XXS
1/8 0,405 0,049 0,057 0,068 0,095
0,3 0,3 0,4 0,5
1/4 0,540 0,065 0,073 0,088 0,119
0,5 0,5 0,6 0,8
3/8 0,675 0,065 0,073 0,091 0,126
0,6 0,7 0,9 1,1
1/2 0,840 0,065 0,083 0,095 0,109 0,147 0,187 0,294
0,8 1,0 1,1 1,3 1,6 2,0 2,6
3/4 1,050 0,065 0,083 0,095 0,113 0,154 0,219 0,308
1,3 1,4 1,7 2,2 2,9 3,7
1 1,315 0,065 0,109 0,114 0,133 0,179 0,250 0,358
2,1 2,2 2,5 3,3 4,3 5,5
1 1/4 1,660 0,065 0,109 0,117 0,140 0,191 0,250 0,382
2,7 2,9 3,4 4,5 5,7 7,9
1 1/2 1,900 0,065 0,109 0,125 0,145 0,200 0,281 0,400
3,2 3,5 4,1 5,5 7,4 9,7
2 2,375 0,065 0,109 0,125 0,154 0,218 0,344 0,436
4,0 4,5 5,5 7,6 11,1 13,4
2 1/2 2,875 0,083 0,120 0,188 0,203 0,276 0,375 0,552
5,3 8,0 8,6 11,4 14,0 20,4
3 3,500 0,083 0,120 0,188 0,216 0,300 0,438 0,600
6,5 9,9 11,3 15,3 21,4 27,7
3 1/2 4,000 0,083 0,120 0,188 0,226 0,318
5,2 7,4 11,4 13,6 18,6
4 4,500 0,083 0,120 0,188 0,237 0,337 0,438 0,531 0,674
5,2 7,4 12,9 16,1 22,3 28,3 33,5 41,0
5 5,563 0,109 0,134 0,258 0,375 0,500 0,625 0,750
9,5 11,6 21,8 31,0 40,3 49,1 57,4
6 6,625 0,109 0,134 0,280 0,432 0,562 0,719 0,864
11,3 13,8 28,3 42,6 54,2 67,6 79,2
8 8,625 0,109 0,148 0,250 0,277 0,322 0,406 0,500 0,594 0,719 0,812 0,960 0,875
14,8 20,0 33,3 36,8 42,6 53,1 64,6 75,9 90,4 100,9 111,3 107,9
10 10,75 0,134 0,165 0,250 0,307 0,365 0,500 0,500 0,594 0,719 0,844 1,000 1,125 1,000
22,6 27,8 42,4 51,8 60,3 81,6 81,6 96,0 114,8 133,1 155,2 172,3 155,2
12 12,75 0,156 0,180 0,250 0,330 0,375 0,406 0,562 0,500 0,688 0,844 1,000 1,125 1,312 1,000
31,3 36,0 49,7 65,2 73,9 79,7 109,0 97,4 132,1 159,9 187,0 208,1 238,8 187,0
14 14,00 0,156 0,188 0,250 0,312 0,375 0,375 0,438 0,594 0,500 0,750 0,938 1,094 1,250 1,406
NOTE: White values are wall thicknesses in inch, grey values are weights in kg/m. Specific teel weight used for calculation is approximate 8.0. Titanium weight in approximately 57% of the table values.NPS= Nominal Pipe Size - description of pipe size in inch,O.D =-Outside Diameter of pipe,Sch5S and 10S do not permit threading according to ASME B1.20.1.Sch40S and 80S in the table are applicable up to and including 12”.
Iden
tical
to 5
S
Iden
tical
to 1
0 S
Iden
tical
to 4
0 S
and
“std
”
Iden
tical
to 8
0 S
and
“XS”
9
PIPESPIPE SCHEDULE CHART ¤MM¥ 2.1
ASME B36.10 ¦ B36.19 PIPE DIMENSIONS IN INCH AND WEIGHTS IN KG
NPS (Inch)
O.D. (Inch)
5 S 5 10 S 10 20 30STD 40 S
40 60XS
80 S80 100 120 140 160 XXS
34,4 41,3 54,7 67,9 81,3 81,3 94,6 126,7 107,4 158,1 195,0 224,7 253,5 281,7
16 16,00 0,165 0,188 0,250 0,312 0,375 0,375 0,500 0,656 0,500 0,844 1,031 1,219 1,438 1,594
41,6 47,3 62,6 77,8 93,3 93, 123,3 160,1 123,3 203,5 245,6 286,6 333,2 365,4
18 18,00 0,165 0,188 0,250 0,312 0,438 0,375 0,562 0,750 0,500 0,938 1,156 1,375 1,562 1,781
46,8 53,3 70,6 87,7 122,4 105,2 155,8 205,7 139,2 254,6 309,6 363,6 408,3 459,4
20 20,00 0,188 0,218 0,250 0,375 0,500 0,375 0,594 0,812 0,500 1,031 1,281 1,500 1,750 1,969
59,3 68,6 78,6 117,2 155,1 117,2 183,4 247,8 155,1 311,2 381,5 441,5 508,1 564,8
22 22,00 0,188 0,218 0,250 0,375 0,500 0,375 0,875 0,500 1,125 1,375 1,625 1,875 2,125
65,2 75,5 86,5 129,1 171,1 129,1 299,3 171,1 373,8 451,5 527,0 600,6 672,3
24 24,00 0,218 0,250 0,250 0,375 0,562 0,375 0,688 0,969 0,500 1,219 1,531 1,812 2,062 2,344
82,5 94,5 94,5 141,1 209,6 141,1 255,4 355,3 187,1 442,1 547,7 640,0 720,2 808,2
26 26,00 0,312 0,500 0,375 0,500
127,4 202,7 152,9 202,7
28 28,00 0,312 0,500 0,625 0,375 0,500
137,2 218,7 271,2 164,9 218,7
30 30,00 0,250 0,312 0,312 0,500 0,625 0,375 0,500
118,3 147,4 147,3 324,7 292,2 176,8 324,7
32 32,00 0,312 0,500 0,625 0,375 0,688 0,500
157,2 250,7 316,9 188,8 342,9 250,6
34 34,00 0,312 0,500 0,625 0,375 0,688 0,500
167,2 266,6 332,1 200,3 365,0 266,6
36 36,00 0,312 0,500 0,625 0,375 0,688 0,500
177,0 282,3 351,7 212,6 420,4 282,3
NOTE: White values are wall thicknesses in inch, grey values are weights in kg/m. Specific teel weight used for calculation is approximate 8.0. Titanium weight in approximately 57% of the table values.NPS= Nominal Pipe Size - description of pipe size in inch,O.D =-Outside Diameter of pipe,Sch5S and 10S do not permit threading according to ASME B1.20.1.Sch40S and 80S in the table are applicable up to and including 12”.
Iden
tical
to 5
S
10
PIPE SCHEDULE CHART ¤MM¥PIPES2.2
ASME B36.10 ¦ B36.19 PIPE DIMENSIONS IN MM AND WEIGHTS IN KG
DN (mm)
NPS
(Inch)
O.D. (mm)
5 S 5 10 S 10 20 30STD 40 S
40 60XS
80 S80 100 120 140 160 XXS
- 1/8 10,3 1,24 1,45 1,73 2,41
0,3 0,3 0,4 0,5
- 1/4 13,7 1,65 1,85 2,24 3,02
0,5 0,5 0,6 0,8
10 3/8 17,1 1,65 1,85 2,31 3,20
0,6 0,7 0,9 1,1
15 1/2 21,3 1,65 2,11 2,41 2,77 3,73 4,75 7,47
0,8 1,0 1,1 1,3 1,6 2,0 26
20 3/4 26,7 1,65 2,1 2,41 2,87 3,91 5,56 782
1,0 1,3 1,4 1,7 2,2 2,9 3,7
25 1 33,4 1,65 2,77 2,90 3,38 4,55 6,35 9,09
1,3 2,1 2,2 2,5 3,3 4,3 55
32 1 1/4 42,2 1,65 2,77 2,97 3,56 4,85 6,35 9,70
1,7 2,7 2,9 3,4 4,5 5,7 7,9
40 1 1/2 48,3 1,65 2,77 3,18 3,68 5,08 7,14 10,15
1,9 3,2 3,5 4,1 5,5 7,4 9,7
50 2 60,3 1,65 2,77 3,18 3,91 5,54 8,74 11,07
2,4 4,0 4,5 5,5 7,6 11,1 13,4
65 2 1/2 73,0 2,11 3,05 4,78 5,16 7,01 953 14,02
3,8 5,3 8,0 8,6 11,4 14,0 20,4
80 3 88,9 2,11 3,05 4,78 5,49 7,62 11,13 15,24
4,6 6,5 9,9 11,3 15 ,3 21,4 27,7
- 3 1/2 101,6 2,11 3,05 4,78 5, 74 8,08
5,2 7,4 11,4 13,6 18,6
100 4 114,3 2,11 3,05 4,78 6,02 8,56 11,13 13,49 17,12
5,8 8,4 12,9 16,1 22,3 28,3 33,5 41,0
125 5 141,3 2,77 3,40 6,55 9,53 12,70 15,88 19,05
9,5 11,6 21,8 31,0 40,3 49,1 57,4
150 6 168,3 2,77 3,40 7,11 10,97 14,27 18,26 21,95
11,3 13,8 28,3 42,6 54,2 67,6 79,2
200 8 219,1 2,77 3,76 6,35 7,04 8,18 10,31 12,70 15,09 18,26 20,62 23,01 22,23
14,8 20,0 33,3 36,8 42,6 53,1 64,6 75,9 90,4 100,9 111,3 107,9
250 10 273,0 3,40 4,19 6,35 7,80 9,27 12,70 12,70 15,09 18,26 21,44 25,40 28,58 25,40
22,6 27,8 42,4 51,8 60,3 81,6 81,6 96,0 114,8 133,1 155,2 172,3 155,2
300 12 323,8 3,96 4,57 6,35 8,38 9,53 10,31 14,27 12,70 17,48 21,44 25,40 28,58 33,32 25,40
31,3 36,0 49,7 65,2 73,9 79,7 109,0 97,4 132,1 159,9 187,0 208,1 238,8 187,0
NOTE: Light blue values are wall thicknesses in mm, darker blue values are weights in kg/m. Specific teel weight used for calculation is 8.0. Titanium weight in approximately 57% of the table values.DN: Nominal Diameter - SI description of pipe size in mm.NPS= Nominal Pipe Size - description of pipe size in inch.O.D =-Outside Diameter of pipe.Sch5S and 10S do not permit threading according to ASME B1.20.1.Sch40S and 80S in the table are applicable up to and including 12”.
Iden
tical
to 5
S
Iden
tical
to 1
0 S
Iden
tical
to 4
0 S
and
“std
”
Iden
tical
to 8
0 S
and
“XS”
11
PIPESPIPE SCHEDULE CHART ¤MM¥ 2.2
ASME B36.10 ¦ B36.19 PIPE DIMENSIONS IN MM AND WEIGHTS IN KG
DN (mm)
NPS
(Inch)
O.D. (mm)
5 S 5 10 S 10 20 30STD 40 S
40 60XS
80 S80 100 120 140 160 XXS
350 14 355,6 3,96 4,78 6,35 7,92 9,53 9,53 11,13 15,09 12,70 19,05 23,83 27,79 31,75 35,71
34,4 41,3 54,7 67,9 81,3 81,3 94,6 126,7 107,4 158,1 195,0 224,7 253,5 281,7
400 16 406,4 4,19 4,78 6,35 7,92 9,53 9,53 12,70 16,66 12,70 21,44 26,19 30,96 36,53 40,49
41,6 47,3 62,6 77,8 93,3 93,3 123,3 160,1 123,3 203,5 245,6 286,6 333,2 365,4
450 18 457 4,19 4,78 6,35 7,92 11,13 9,53 14,27 19,05 12,70 23,83 29,36 34,93 39,67
46,8 53,3 70,6 87,7 122,4 105,2 155,8 205,7 139,2 254,6 309,6 363,6 408,3 459,4
500 20 508 4,78 5,54 6,35 9,53 12,70 9,53 15,09 20,62 12,70 26,19 32,54 38,10 44,45 50,01
59,3 68,6 78,6 117,2 155, 1 117,2 183,4 247,8 155,1 311,2 381,5 441,5 508,1 564,8
- 22 559 4,78 5,54 6,35 9,53 12,70 9,53 22,23 12,70 28,58 34,93 41,28 47,63 53,98
65,2 75,5 86,5 129,1 171,1 129,1 299,3 171,1 373,8 451,5 527,0 600,6 672,3
600 24 610 5,54 6,35 6,35 9,53 14,27 9,53 17,48 24,61 12,70 30,96 38,89 46,02 52,37 59,54
82,5 94,5 94,5 141,1 209,6 141,1 255,4 355,3 187,1 442,1 547,7 640,0 720,2 808,2
- 26 660 7,92 12,70 9,53 12,70
127,4 202,7 152,9 202,7
700 28 711 7,92 12,70 15,88 9,53 12,70
137,2 218,7 271,2 164,9 218,7
- 30 762 6,35 7,92 7,92 12,70 15,88 9,53 12,70
118,3 147,4 147,3 324,7 292,2 176,8 324,7
800 32 813 7,92 12,70 15,88 9,53 17,48 12,70
157,2 250,7 316,9 188,8 342,9 250,6
- 34 864 7,92 12,70 15,88 9,53 17,48 12,70
167,2 266,6 332, 1 200,3 365,0 266,6
900 36 914 7,92 12,70 15,88 9,53 19,05 12,70
177,0 282,3 351,7 212,6 420,4 282,3
NOTE: Light blue values are wall thicknesses in mm, darker blue values are weights in kg/m. Specific teel weight used for calculation is 8.0. Titanium weight in approximately 57% of the table values.DN: Nominal Diameter - SI description of pipe size in mm.NPS= Nominal Pipe Size - description of pipe size in inch.O.D =-Outside Diameter of pipe.Sch5S and 10S do not permit threading according to ASME B1.20.1.Sch40S and 80S in the table are applicable up to and including 12”.
Iden
tical
to 5
S
12
LINE PIPESPIPES2.3
ASME B36.10 DIMENSIONS
Size Outside Dia.
Wall Thick.
Inner Dia. Weight Identifi ation Size Outside
Dia.Wall
Thick.Inner Dia. Weight Identifi ation
Inch mm mm mm KG/M STD XS;XXS
Sche-dule
Inch NO mm mm mm KG/M STD
XS;XXSSche-dule
1/8 10,3 1,73 6,8 0,4 STD 40 3 88,9 5,49 77,9 11,3 STD 40
2,41 5,5 0,5 XS 80 6,35 76,2 12,9
1/4 13,7 2,24 9,2 0,6 STD 40 7,14 74,6 14,4
3,02 7,7 0,8 XS 80 7,62 73,7 15,3 XS 80
3/8 17, 1 2,31 12,5 0,8 STD 40 11,13 66,6 21,4 160
3,20 10,7 1,1 XS 80 15,24 58,4 27,7 XXS
1/2 21,3 2,77 15,8 1,3 STD 40 3 1/2 101,6 2,11 97,4 5,2 5
3,73 13,8 1,6 XS 80 2,77 96,1 6,8
4,78 11,7 2,0 160 3,05 95,5 7,4 10
7,47 6,4 2,6 XXS 3,18 95,3 7,7
3/4 26,7 2,87 21,0 1,7 STD 40 3,58 94,4 8,7
3,91 18,9 2,2 XS 80 3,96 93,7 9,5
5,56 15,6 2,9 160 4,37 92,9 10,5
7,82 11,1 3,6 XXS 4,78 92,0 11,4 30
1 33,4 3,38 26,6 2,5 STD 40 5,74 90,1 13,6 STD 40
4,55 24,3 3,2 XS 80 6,35 88,9 14,9
6,35 20,7 4,2 160 7,14 87,3 16,6
9,09 15,2 5,5 XXS 8,08 85,4 18,6 XS 80
1 1/4 42,2 3,56 35,1 3,4 STD 40 4 114,3 2,11 110,1 5,8 5
4,85 32,5 4,5 XS 80 2,77 108,8 7,6
6,35 29,5 5,6 160 3,05 108,2 8,4 10
9,70 22,8 7,8 XXS 3,18 108,0 8,7
1 1/2 48,3 3,68 40,9 4,1 STD 40 3,58 107,1 9,8
5,08 38,1 5,4 XS 80 3,96 106,4 10,8
7,14 34,0 7,3 160 4,37 105,6 11,9
10,15 28,0 9,6 XXS 4,78 104,7 12,9 30
2 60,3 1,65 57,0 2,4 5 5,16 104,0 13,9
2,11 56,1 3,0 5,56 103,2 14,9
2,77 54,8 3,9 10 6,02 102,3 16,1 STD 40
3,18 53,9 4,5 30 6,35 101,6 16,9
3,58 53,1 5,0 7,14 100,0 18,9
3,91 52,5 5,4 STD 40 7,92 98,5 20,8
4,37 51,6 6,0 8,56 97,2 22,3 XS 80
4,78 50,7 6,5 11,13 92,0 28,3 120
5,54 49,2 7,5 XS 80 13,49 87,3 33,5 160
6,35 47,6 8,5 17,12 80,1 41,0 XXS
7,14 46,0 9,4 5 141,3 2,11 137,1 7,2
8,74 42,8 11,1 160 2,77 135,8 9,5 5
11,07 38,2 13,4 XXS 3,18 135,0 10,8
2 1/2 73,0 2,11 68,8 3,7 5 3,40 134,5 11,6 10
2,77 67,5 4,8 3,96 133,4 13,4
3,05 66,9 5,3 10 4,78 131,7 16, 1
13
PIPESLINE PIPES 2.3
ASME B36.10 DIMENSIONS
Size Outside Dia.
Wall Thick.
Inner Dia. Weight Identifi ation Size Outside
Dia.Wall
Thick.Inner Dia. Weight Identifi ation
Inch mm mm mm KG/M STD XS;XXS
Sche-dule
Inch NO mm mm mm KG/M STD
XS;XXSSche-dule
3,18 66,7 5,5 5,56 130,2 18,6
3,58 65,8 6,1 6,55 128,2 21,8 STD 40
3,96 65,1 6,7 7, 14 127,0 23,6
4,37 64,3 7,4 7,92 125,5 26,1
4,78 63,4 8,0 30 8,74 123,8 28,6
5,16 62,7 8,6 STD 40 9,53 122,3 31,0 XS 80
5,49 62,0 9,1 12,70 115,9 40,3 120
6,35 60,3 10,4 15,88 109,6 49,1 160
7,01 59,0 11,4 XS 80 19,05 103,2 57,4 XXS
9,53 54,0 14,9 160 6 168,3 2,11 164,1 8,7
14,02 45,0 20,4 XXS 2,77 162,8 11,3 5
3 88,9 2,11 84,7 4,5 5 3,18 162,0 13,0
2,77 83,4 5,9 3,40 161,5 13,8 10
3,05 82,8 6,5 10 3,58 161,1 14,5
3,18 82,6 6,7 3,96 160,4 16,1
3,58 81,7 7,5 4,37 159,6 17,7
3,96 81,0 8,3 4,78 158,7 19,3
4,37 80,2 9,1 5,16 158,0 20,8
4,78 79,3 9,9 30 5,56 157,2 22,3
6 168,3 6,35 155,6 25,4 12 323,8 3,96 315,9 31,3 5
7,11 154,1 28,3 STD 40 4,37 315,1 34,4
7,92 152,5 31,3 4,57 314,7 36,0 10
8,74 150,8 34,4 4,78 314,2 37,6
9,53 149,3 37,3 5,16 313,5 40,6
10,97 146,4 42,6 XS 80 5,56 312,7 43,7
12,70 142,9 48,7 6,35 311,1 49,7 20
14,27 139,8 54,2 120 7,14 309,5 55,8
15,88 136,6 59,7 7,92 308,0 61,7
18,26 131,8 67,6 160 8,38 307,0 65,2 30
19,05 130,2 70,1 8,74 306,3 67,9
21,95 124,4 79,2 XXS 9,53 304,7 73,9 STD
22,23 123,8 80,1 10,31 303,2 79,7 40
8 219,1 2,77 213,6 14,8 5 11,13 301,5 85,8
3,18 212,8 16,9 12,70 298,4 97,5 XS
3,76 211,6 20,0 10 14,27 295,3 109,0 60
3,96 211,2 21,0 15,88 292,1 120,6
4,78 209,5 25,3 17,48 288,8 132,1 80
5,16 208,8 27,2 19,05 285,7 143,2
5,56 208,0 29,3 20,62 282,6 154,2
6,35 206,4 33,3 20 21,44 280,9 159,9 100
14
LINE PIPESPIPES2.3
ASME B36.10 DIMENSIONS
Size Outside Dia.
Wall Thick.
Inner Dia. Weight Identifi ation Size Outside
Dia.Wall
Thick.Inner Dia. Weight Identifi ation
Inch mm mm mm KG/M STD XS;XXS
Sche-dule
Inch NO mm mm mm KG/M STD
XS;XXSSche-dule
7,04 205,0 36,8 30 22,23 279,4 165,4
7,92 203,3 41,2 23,83 276,1 176,3
8,18 202,7 42,6 STD 40 25,40 273,0 187,0 XXS 120
8,74 201,6 45,3 26,97 269,9 197,5
9,53 200,1 49,3 28,58 266,7 208,1 140
10,31 198,5 53,1 60 31,75 260,3 228,7
11,13 196,8 57,1 33,32 257,2 238,8 160
12,70 193,7 64,6 XS 80 14 355,6 3,96 347,7 34,4 5
14,27 190,6 72,1 4,78 346,0 41,4
15,09 188,9 75,9 100 5,16 345,3 44,6
15,88 187,4 79,6 5,33 344,9 46,0
18,26 182,6 90,4 120 5,56 344,5 48,0
19,05 181,0 94,0 6,35 342,9 54,7 10
20,62 177,9 100,9 140 7,14 341,3 61,4
22,23 174,7 107,9 XXS 7,92 339,8 67,9 20
23,01 173,1 111,3 160 8,74 338,1 74,8
25,40 168,3 121,3 9,53 336,6 81,3 STD 30
10 273,0 3,40 266,2 22,6 5 10,31 335,0 87,8
3,96 265,1 26,3 11,13 333,3 94,6 40
4,19 264,6 27,8 10 11,91 331,8 100,9
4,78 263,4 31,6 12,70 330,2 107,4 XS
5,16 262,7 34,1 14,27 327,1 120,1
5,56 261,9 36,7 15,09 325,4 126,7 60
6,35 260,3 41,8 20 15,88 323,9 133,0
7,09 258,8 46,5 17,48 320,6 145,8
7,80 257,4 51,0 30 19,05 317,5 158,1 80
8,74 255,5 57,0 20,62 314,4 170,3
9,27 254,5 60,3 STD 40 22,23 311,2 182,8
11,13 250,7 71,9 23,83 307,9 195,0 100
12,70 247,6 81,6 XS 60 25,40 304,8 206,8
14,27 244,5 91,1 26,97 301,7 218,6
15,09 242,8 96,0 80 27,79 300,0 224,7 120
15,88 241,3 100,7 28,58 298,4 230,5
18,26 236,5 114,8 100 31,75 292,1 253,6 140
20,62 231,8 128,4 35,71 284,2 281,7 160
21,44 230,1 133,1 120 50,80 254,0 381,8
22,23 228,5 137,5 53,98 247,7 401,5
23,83 225,3 146,5 55,88 243,8 413,0
25,40 222,2 155,2 XXS 140 63,50 228,6 457,4
28,58 215,9 172,3 160
31,75 209,5 189,0
16 406,4 4,19 398,0 41,6 5 20 508 4,78 498,4 59,3 5
15
PIPESLINE PIPES 2.3
ASME B36.10 DIMENSIONS
Size Outside Dia.
Wall Thick.
Inner Dia. Weight Identifi ation Size Outside
Dia.Wall
Thick.Inner Dia. Weight Identifi ation
Inch mm mm mm KG/M STD XS;XXS
Sche-dule
Inch NO mm mm mm KG/M STD
XS;XXSSche-dule
4,78 396,8 47,3 5,56 496,9 68,9
5,16 396,1 51, 1 6,35 495,3 78,6 10
5,56 395,3 55,0 7,14 493,7 88,2
6,35 393,7 62,6 10 7,92 492,2 97,7
7,14 392,1 70,3 8,74 490,5 107,6
7,92 390,6 77,8 20 9,53 489,0 117,2 STD 20
8,74 388,9 85,7 10,31 487,4 126,5
9,53 387,4 93,3 STD 30 11, 13 485,7 136,4
10,31 385,8 100,7 11,91 484,2 145,7
11,13 384,1 108,5 12,70 482,6 155,1 XS 30
11,91 382,6 115,9 14,27 479,5 173,7
12,70 381,0 123,3 XS 40 15,09 477,8 183,4 40
14,27 377,9 138,0 15,88 476,3 192,7
15,88 374,7 152,9 17,48 473,0 211,4
16,66 373,1 160, 1 60 19,05 469,9 229,7
17,48 371,4 167,7 20,62 466,8 247,8 60
19,05 368,3 182,0 22,23 463,6 266,3
20,62 365,2 196,2 23,83 460,3 284,5
21,44 363,5 203,5 80 25,40 457,2 302,3
22,23 362,0 210,6 26,19 455,6 311,2 80
23,83 358,7 224,8 26,97 454,1 319,9
25,40 355,6 238,6 28,58 450,9 337,9
26,19 354,0 245,6 100 30,18 447,7 355,6
26,97 352,5 252,4 31,75 444,5 372,9
28,58 349,3 266,3 32,54 442,9 381,5 100
30,18 346,0 280,0 33,32 441,4 390,0
30,96 344,5 286,6 120 34,93 438,2 407,5
31,75 342,9 293,3 38,10 431,8 441,5 120
36,53 333,3 333,2 140 44,45 419,1 508,1 140
40,49 325,4 365,4 160 50,01 408,0 564,8 160
16 457 4, 19 448,6 46,8 5 22 559 4,78 549,4 65,2 5
4,78 447,4 53,3 5,56 547,9 75,9
5,56 445,9 61,9 6,35 546,3 86,5 10
6,35 444,3 70,6 10 7,14 544,7 97,2
7,14 442,7 79,2 7,92 543,2 107,6
7,92 441,2 87,8 20 8,74 541,5 118,6
8,74 439,5 96,6 9,53 540,0 129,1 STD 20
9,53 438,0 105,2 STD 10,31 538,4 139,5
10,31 436,4 113,6 11,13 536,7 150,4
11,13 434,7 122,4 30 11,91 535,2 160,7
11,91 433,2 130,7 12,70 533,6 171,1 XS 30
12,70 431,6 139,2 XS 14,27 530,5 191,7
16
LINE PIPESPIPES2.3
ASME B36.10 DIMENSIONS
Size Outside Dia.
Wall Thick.
Inner Dia. Weight Identifi ation Size Outside
Dia.Wall
Thick.Inner Dia. Weight Identifi ation
Inch mm mm mm KG/M STD XS;XXS
Sche-dule
Inch NO mm mm mm KG/M STD
XS;XXSSche-dule
14,27 428,5 155,8 40 15,88 527,3 212,7
15,88 425,3 172,7 17,48 524,0 233,4
17,48 422,0 189,5 19,05 520,9 253,7
19,05 418,9 205,7 60 20,62 517,8 273,8
20,62 415,8 221,9 22,23 514,6 294,3 60
22,23 412,6 238,3 23,83 511,3 314,5
23,83 409,3 254,6 80 25,40 508,2 334,2
25,40 406,2 270,3 26,97 505,1 353,8
26,97 403,1 286,0 28,58 501,9 373,8 80
28,58 399,9 301,9 30,18 498,6 393,6
29,36 398,3 309,6 100 31,75 495,5 412,8
30,18 396,7 317,7 33,32 492,4 431,9
31,75 393,5 333,0 34,93 489,2 451,4 100
34,93 387,2 363,6 120 36,53 485,9 470,7
39,67 377,7 408,3 140 38,10 482,8 489,4
45,24 366,5 459,4 160 41,28 476,5 527,0 120
47,63 463,8 600,6 140
53,98 451,1 672,3 160
24 610 5,54 599,0 82,5 5 28 711 19,05 672,9 325,1
6,35 597,3 94,5 10 20,62 669,8 351, 1
7,14 595,7 106,2 22,23 377,6 377,6
7,92 594,2 117,6 23,83 663,3 403,8
8,74 592,5 129,6 25,40 660,2 429,4
9,53 591,0 141,1 STD 20 30 762 6,35 749,3 118,3 5
10,31 589,4 152,5 7,14 747,7 132,9
11,13 587,7 164,4 7,92 746,2 147,3 10
11,91 586,2 175,7 8,74 744,5 162,4
12,70 584,6 187,1 XS 9,53 743,0 176,8 STD
14,27 581,5 209,6 30 10,31 741,4 191,1
15,88 578,3 232,7 11, 13 739,7 206,1
17,48 575,0 255,4 40 11,91 738,2 220,3
19,05 571,9 277,6 12,70 736,6 234,7 XS 20
20,62 568,8 299,7 14,27 733,5 263,1
22,23 565,6 322,2 15,88 730,3 292,2 30
23,83 562,3 344,5 17,48 727,0 320,9
24,61 560,8 355,3 60 19,05 723,9 394,0
25,40 559,2 366,2 20,62 720,8 377,0
26,97 556,1 387,8 22,23 717,6 405,5
28,58 552,9 409,8 23,83 714,3 433,8
30,18 549,6 431,5 25,40 711,2 461,4
30,96 548,1 442,1 26,97 708,1 488,9
31,75 546,5 452,7 80 28,58 704,8 516,9
17
PIPESLINE PIPES 2.3
ASME B36.10 DIMENSIONS
Size Outside Dia.
Wall Thick.
Inner Dia. Weight Identifi ation Size Outside
Dia.Wall
Thick.Inner Dia. Weight Identifi ation
Inch mm mm mm KG/M STD XS;XXS
Sche-dule
Inch NO mm mm mm KG/M STD
XS;XXSSche-dule
33,32 543,4 473,8 30,18 701,6 544,7
34,93 540,2 495,4 31,75 698,5 571,8
36,53 536,9 516,8 32 813 6,35 800,3 126,3
38,10 533,8 537,3 7,14 798,7 141,9
38,89 532,2 547,7 100 7,92 797,2 157,2 10
39,67 530,7 557,4 8,74 795,5 173,3
46,02 518,0 640,0 120 9,53 794,0 188,8 STD
52,37 505,3 720,2 140 10,31 792,4 204,1
59,54 490,9 808,2 160 11,13 790,7 220,1
26 660 6,35 647,3 102,4 11,91 789,2 235,3
7,14 645,7 115,0 12,70 787,6 250,6 XS 20
7,92 644,2 127,4 10 14,27 784,5 281,1
8,74 642,5 140,4 15,88 781,3 312,2 30
9,53 641,0 152,9 STD 17,48 778,0 342,9 40
10,31 639,4 165,2 19,05 774,9 373,0
11,13 637,7 178,1 20,62 771,8 402,9
11,91 636,2 190,3 22,23 768,6 433,5
12,70 634,6 202,7 XS 20 23,83 765,3 463,8
14,27 631,5 227,2 25,40 762,2 493,3
15,88 628,3 252,2 26,97 759,1 522,8
17,48 625,0 277,0 28,58 755,8 552,9
19,05 621,9 301,1 30,18 752,6 582,6
20,62 618,8 325,1 31,75 794,5 611,7
22,23 615,6 349,6 34 864 6,35 851,3 134,3
23,83 612,3 373,8 7,14 849,7 150,9
25,40 609,2 397,5 7,92 848,2 167,2 10
28 711 6,35 698,3 110,3 8,74 846,5 184,3
7,14 696,7 123,9 9,53 845,0 200,3 STD
7,92 695,2 137,3 10 10,31 843,4 217,1
8,74 693,5 151,4 11,13 841,7 234,1
9,53 692,0 164,9 STD 11,91 840,2 250,3
10,31 690,4 178,2 12,70 838,6 266,6 XS 20
11,13 688,7 192,1 14,27 835,5 299,0
11,91 687,2 205,3 15,88 832,3 332,1 30
12,70 685,6 218,7 XS 20 17,48 829,0 364,9 40
14,27 682,5 245,2 19,05 825,9 396,9
15,88 679,3 271,2 30 20,62 822,8 428,9
17,48 676,0 299,0 22,23 819,6 461,5
34 864 23,83 816,3 493,7 42 1067 8,74 1049,6 228
25,40 813,2 525,3 9,53 1048,0 248
26,97 810,1 556,7 10,31 1046,4 269
28,58 806,8 588,8 11,13 1044,8 290
18
LINE PIPESPIPES2.3
ASME B36.10 DIMENSIONS
Size Outside Dia.
Wall Thick.
Inner Dia. Weight Identifi ation Size Outside
Dia.Wall
Thick.Inner Dia. Weight Identifi ation
Inch mm mm mm KG/M STD XS;XXS
Sche-dule
Inch NO mm mm mm KG/M STD
XS;XXSSche-dule
30,18 803,6 620,6 11,91 1043,2 310
31,75 800,5 651,6 12,70 1041,6 330
36 914 6,35 901,3 142,1 14,27 1038,4 370
7,14 899,7 159,7 15,88 1035,2 411
7,92 898,2 177,0 10 17,48 1032,0 452
8,74 896,5 195,1 19,05 1029,0 492
9,53 895,0 212,6 STD 20,62 1025,8 532
10,31 893,4 229,8 22,23 1022,6 572
11,13 891,7 247,3 23,83 1019,4 615
11,91 890,2 264,9 25,40 1016,2 652
12,70 888,6 282,3 XS 20 44 1168 8,74 1150,6 239
14,27 885,5 316,1 9,53 1149,0 260
15,88 882,3 351,7 30 10,31 1147,4 282
17,48 879,0 386,5 11,13 1145,8 304
19,05 875,9 420,4 40 11,91 1144,2 325
20,62 872,8 454,3 12,70 1142,6 346
22,23 869,6 488,9 14,27 1139,4 388
23,83 866,3 523,1 15,88 1136,2 431
25,40 863,2 556,6 17,48 1133,0 474
26,97 860,1 590,0 19,05 1130,0 516
28,58 856,8 624,0 20,62 1126,8 558
30,18 853,6 657,8 22,23 1123,6 600
31,75 850,5 690,8 23,83 1120,4 643
38 965 7,92 949,1 186,9 25,40 1117,2 684
8,74 947,5 206,1 46 1158 8,74 1140,6 250
9,53 945,9 224,5 9,53 1139,0 272
10,31 944,4 242,7 10,31 1137,4 294
11, 13 942,7 261,8 11,13 1135,8 317
11,91 941,2 279,9 11,91 1134,2 340
12,70 939,6 298,2 12,70 1132,6 362
14,27 936,5 334,6 14,27 1129,4 406
15,88 933,2 371,7 15,88 1126,2 451
17,48 930,0 408,4 17,48 1123,0 496
19,05 926,9 444,4 19,05 1120,0 540
20,62 923,8 480,2 20,62 1116,8 584
22,23 920,5 516,8 22,23 1113,6 628
23,83 917,3 553,1 23,83 1110,4 672
25,40 914,2 588,5 25,40 1107,2 716
40 1016 7,92 1000,2 196,9 48 1219 8,74 1201,6 261
8,74 998,5 217,1 9,53 1200,0 284
9,53 996,9 236,5 10,31 1198,4 307
10,31 995,4 255,7 11,13 1196,8 331
19
PIPESLINE PIPES 2.3
ASME B36.10 DIMENSIONS
Size Outside Dia.
Wall Thick.
Inner Dia. Weight Identifi ation Size Outside
Dia.Wall
Thick.Inner Dia. Weight Identifi ation
Inch mm mm mm KG/M STD XS;XXS
Sche-dule
Inch NO mm mm mm KG/M STD
XS;XXSSche-dule
11,13 993,7 275,8 11,91 1195,2 355
11,91 992,2 294,8 12,70 1193,6 378
12,70 990,6 314,2 14,27 1190,4 424
14,27 987,5 352,5 15,88 1187,2 471
15,88 984,2 391,7 17,48 1184,0 518
17,48 981,0 430,4 19,05 1181,0 564
19,05 977,9 468,3 20,62 1177,8 610
20,62 974,8 506, 1 22,23 1174,6 656
22,23 971,5 544,8 23,83 1171,4 702
23,83 968,3 583,1 25,40 1168,2 748
25,40 965,2 620,5
NOTE: Complete range of wall thicknesses from ASME B36.10 are icluded for 2" - 36" pipe sizes. Other dimensions are only including a range of dimensions/wall thicknesses from ASME B36.10.
20
DIMENSIONAL TOLERANCES FOR PIPE ACC TO ASTM
OUTSIDE DIAMETER
NPS Desingnator Permissible Variations in Outside Diameter
Over Under
Inch mm Inch mm
1/8-1 1/2, incl 1/64 (0.015) 0.4 1/32 (0.031) 0.8
Over 1 1/2 to 4, incl 1/32 (0.031) 0.8 1/32 (0.031) 0.8
Over 4 to 8, incl 1/16 (0.062) 1.6 1/32 (0.031) 0.8
Over 8 to 18, incl 3/32 (0.093) 2.4 1/32 (0.031) 0.8
Over 18 to 26, incl 1/8 (0.125) 3.2 1/32 (0.031) 0.8
Over 26 to 34, incl 5/32 (0.156) 4.0 1/32 (0.031) 0.8
Over 34 to 48, incl 3/16 (0.187) 4.8 1/32 (0.031) 0.8
STRAIGHTNESS TOLERANCES
Specified OD, Inc A Specified all Thickness, InchA
Maximum Curvature in any 3 ft, InchA
Maximum Curvature in Total Length, InchA
Up to 5.0, incl. Over 3 % OD to 0.5, incl 0.030 0.010 x length, ft
Over 5.0 to 8.0, incl. Over 4 % OD to 0.75 incl. 0.045 0.015 x length, ft
Over 8.0 to 12.75, incl Over 4 % OD to 1.0, incl. 0.060 0.020 x length, ft
NOTE: A 1 inch. = 25.4 mm.
DIMENSIONAL TOLERANCESPIPES2.4
21
22
23
Content
3.1 Metric Sizes and Pressure in Bar 24
3.2 Fractional Sizes and Pressure in PSI 28
3TUBING 316, DUPLEX, 6MO
24
METRIC SIZES AND PRESSURE IN BARTUBING3.1
FACTOR CHART FOR PRESSURE CALCULATION OF TUBING ̄METRIC
TUBE WALL THICKNES (mm)
TUBE O.D. (mm)
1 1,2 1,5 1,6 1,8 2 2,2 2,5 3
3 0,80004 0,6000 0,72416 0,3846 0,4706 0,6000 0,64238 0,2778 0,3409 0,4382 0,4706
10 0,2174 0,2655 0,3409 0,3670 0,4188 0,470612 0,1786 0,2174 0,2778 0,2985 0,3409 0,384614 0,1515 0,1840 0,2344 0,2516 0,2866 0,3226 0,3595 0,4152 0,507716 0,1316 0,1596 0,2027 0,2174 0,2473 0,2778 0,3090 0,3571 0,438218 0, 1163 0,1408 0,1786 0,1914 0,2174 0,2439 0,2709 0,3125 0,384620 0,1042 0,1261 0,1596 0,1709 0,1940 0,2174 0,2412 0,2778 0,340922 0,0943 0,1141 0,1442 0,1544 0,1751 0,1961 0,2174 0,2500 0,306125 0,0826 0,0998 0,1261 0,1349 0,1528 0,1709 0, 1893 0,2174 0,265528 0,0735 0,0888 0, 1119 0,1198 0,1355 0,1515 0,1677 0,1923 0,234430 0,0685 0,0826 0,1042 0,1114 0,1261 0,1408 0,1558 0,1786 0,217438 0,0538 0,0648 0,0815 0,0871 0,0985 0,1099 0,1214 0,1389 0, 1685
NOTE: Factors below heavy black line are calculated to ASME B31.3 section 304 using theY=0.4, while the right factors are calculated by using Y=d/(d+D).
The below table values are based on ASME B31.3 section 304, and may be used for calculation of:1. Working pressure (maximum allowable by design standard), i.e.”Table factor” multiplied by “Maximum Allowable I
Stress” (MPa)2. Yield pressure (calculated by nominal values), i.e. “Table factor” multiplied by “Minimum Yield Strength” (MPa)3. Burst pressure (calculated by nominal values), i.e. “Table factor” multiplied by “Minimum Tensile Strength” (MPa)
25
TUBINGMETRIC SIZES AND PRESSURE IN BAR 3.1
WORKING PRESSURE FOR SEAMLESS ASTM A269 316/ 316L ²BAR³
TUBE WALL THICKNES (mm)
TUBE O.D. (mm)
1 1,2 1,5 1,6 1,8 2 2,2 2,5 3
3 10324 774 9346 496 607 774 8298 358 440 565 607
10 280 342 440 473 540 60712 230 280 358 385 440 49614 195 237 302 325 370 416 464 536 65516 170 206 261 280 319 358 399 461 56518 150 182 230 247 280 315 350 403 49620 134 163 206 221 250 280 311 358 44022 122 147 86 199 226 253 280 323 39525 107 129 163 174 197 221 244 280 34228 95 114 144 154 175 195 216 248 30230 88 107 134 144 163 182 201 230 28038 69 84 105 112 127 142 157 179 217
NOTE: The above pressures should only be used for guidance - as applicable codes, design standards and allowable stresses may result in other values.
Allowable stress = 129MPa between -29 degree C and 38 degree C, based on: ASTM A213 - minimum yield 205MPa and min. tensile strength 515MPa. Safety factor = 4 - for 515MPa
26
METRIC SIZES AND PRESSURE IN BARTUBING3.1
WORKING PRESSURE FOR SEAMLESS ASTM A269 6MO ¯ UNS S31254 ²BAR³
TUBE WALL THICKNES (mm)
TUBE O.D. (mm)
1 1,2 1,5 1,6 1,8 2 2,2 2,5 3
3 13524 1014 12246 650 795 1014 10868 469 576 741 795
10 367 449 576 620 708 79512 302 367 469 504 576 65014 256 311 396 425 484 545 608 702 85816 222 270 343 367 418 469 522 604 74118 197 238 302 323 367 412 458 528 65020 176 213 270 289 328 367 408 469 57622 159 193 244 261 296 331 367 423 51725 140 169 213 228 258 289 320 367 44928 124 150 189 202 229 256 283 325 39630 116 140 176 188 213 238 263 302 36738 91 110 138 147 166 186 205 235 285
NOTE: The above pressures should only be used for guidance - as applicable codes, design standards and allowable stresses may result in other values.
Allowable stress = 169 MPa between -29 degree C and 93 degree C, based on: ASTM A249 - minimum yield 310MPa and min. tensile strength 675MPa.Safety factor= 4 - for 675MPa
27
TUBINGMETRIC SIZES AND PRESSURE IN BAR 3.1
WORKING PRESSURE FOR SEAMLESS 22CR DUPLEX ̄UNS S31803 ²BAR³
TUBE WALL THICKNES (mm)
TUBE O.D. (mm)
1 1,2 1,5 1,6 1,8 2 2,2 2,5 3
3 12404 930 11226 596 729 930 9968 431 528 679 729
10 337 412 528 569 649 72912 277 337 431 463 528 59614 235 285 363 390 444 500 557 644 78716 204 247 314 337 383 431 479 554 67918 180 218 277 297 337 378 420 484 59620 161 195 247 265 301 337 374 431 52822 146 177 224 239 271 304 337 388 47425 128 155 195 209 237 265 293 337 41228 114 138 174 186 210 235 260 298 36330 106 128 161 173 195 218 242 277 33738 83 100 126 135 153 170 188 215 261
NOTE: The above pressures should only be used for guidance - as applicable codes, design standards and allowable stresses may result in other values.
Allowable stress =155 MPa between -29 degree C and 38 degree C, based on: ASTM A789 - minimum yield 450MPa and min. tensile strength 620MPa.Safety factor= 4 - for 620MPa
28
FRACTIONAL SIZES AND PRESSURE IN PSITUBING3.2
FACTOR CHART FOR PRESSURE CALCULATION OF TUBING ̄FRACTIONAL
TUBE WALL THICKNES (Inch)
TUBE O.D.
(Inch)
TUBE OD (mm) (Info
only)0,028 0,035 0,04 0,065 0,083 0,095 0,109 0,120 0,134 0,148 0,156
1/8 3,18 0,5329 0,67563/16 4,76 0,3392 0,4360 0,62891/4 6,35 0,2460 0,3153 0,4602 0,6255
5/16 7,94 0,1930 0,2460 0,3586 0,49143/8 9,53 0,1588 0,2017 0,2918 0,4017 0,52601/2 12,70 0,1173 0,1483 0,2127 0,2902 0,3828 0,44475/8 15,88 0,1173 0,1673 0,2269 0,2972 0,3461 0,40443/4 19,05 0,0970 0,1379 0,1862 0,2428 0,2819 0,3289 0,36707/8 22,23 0,0826 0,1173 0,1580 0,2053 0,2378 0,2767 0,3081 0,34901 25,40 0,0720 0,1020 0,1371 0,1778 0,2056 0,2388 0,2655 0,3002
1 1/4 31,75 0,1085 0,1403 0,1618 0,1875 0,2080 0,2345 0,2616 0,27731 1/2 38,10 0,1158 0,1334 0,1543 0,1709 0,1924 0,2142 0,2269
2 50,80 0,0988 0,1140 0,1261 0,1416 0,1573 0,1664
NOTE: Factors below heavy black line are calculated to ASME B31.3 section 304 using the Y=0.4, while the right factors are calculated by using Y=d/(d+D).
The below table values are based on ASME B31.3 section 304, and may be used for calculation of:1. 1) Working pressure (maximum allowable by design standard), i.e. “Table factor” multiplied by “Maximum Allowable
Stress” (MPa)2. 2) Yield pressure (calculated by nominal values), i.e. “Table factor” multiplied by “Minimum Yield Strength” (MPa)3. 3) Burst pressure (calculated by nominal values), i.e. “Table factor” multiplied by “Minimum Tensile Strength” (MPa)
29
TUBINGFRACTIONAL SIZES AND PRESSURE IN PSI 3.2
WORKING PRESSURE FOR SEAMLESS ASTM A269 316/ 316L ²PSI³
TUBE WALL THICKNES (Inch)
TUBE O.D.
(Inch)
TUBE OD (mm) (Info
only)0,028 0,035 0,04 0,065 0,083 0,095 0,109 0,120 0,134 0,148 0,156
1/8 3,18 0,5329 0,67563/16 4,76 0,3392 0,4360 0,62891/4 6,35 0,2460 0,3153 0,4602 0,6255
5/16 7,94 0,1930 0,2460 0,3586 0,49143/8 9,53 0,1588 0,2017 0,2918 0,4017 0,52601/2 12,70 0,1173 0,1483 0,2127 0,2902 0,3828 0,44475/8 15,88 0,1173 0,1673 0,2269 0,2972 0,3461 0,40443/4 19,05 0,0970 0,1379 0,1862 0,2428 0,2819 0,3289 0,36707/8 22,23 0,0826 0,1173 0,1580 0,2053 0,2378 0,2767 0,3081 0,34901 25,40 0,0720 0,1020 0,1371 0,1778 0,2056 0,2388 0,2655 0,3002
1 1/4 31,75 0,1085 0,1403 0,1618 0,1875 0,2080 0,2345 0,2616 0,27731 1/2 38,10 0,1158 0,1334 0,1543 0,1709 0,1924 0,2142 0,2269
2 50,80 0,0988 0,1140 0,1261 0,1416 0,1573 0,1664
NOTE: Factors below heavy black line are calculated to ASME B31.3 section 304 using the Y=0.4, while the right factors are calculated by using Y=d/(d+D).
Allowable stress= 18750 psi between -29 degree C and 38 degree C, based on: ASTM A213 - minimum yield 205MPa and min. tensile strength 515MPaSafety facto r= 4 - for 75000psi (515MPa)
30
FRACTIONAL SIZES AND PRESSURE IN PSITUBING3.2
WORKING PRESSURE FOR SEAMLESS ASTM A269 6MO ¯ UNS S31254 ²PSI³
Allowable stress = 24500 psi between -29 degree C and 93 degree C, based on: ASTM A249 - minimum yield 310MPa and min. tensile strength 675MPa (ASTM A249)Safety factor = 4 - for 98000 psi (675MPa)
TUBE WALL THICKNES (Inch)
TUBE O.D.
(Inch)
TUBE OD (mm) (Info
only)0,028 0,035 0,049 0,065 0,083 0,095 0,109 0,120 0,134 0,148 0,156
1/8 3,18 13056 165523/16 4,76 8310 10683 154071/4 6,35 6028 7725 11275 15324
5/16 7,94 4729 6028 8785 120383/8 9,53 3891 4942 7150 9842 128871/2 12,70 2873 3633 5211 7109 9380 108945/8 15,88 2873 4099 5558 7281 8479 99093/4 19,05 2375 3378 4563 5949 6907 8058 89917/8 22,23 2025 2873 3870 5030 5826 6780 7548 85521 25,40 1764 2499 3360 4356 5038 5851 6504 7354
1 1/4 31,75 2659 3436 3965 4593 5095 5746 6409 67931 1/2 38,10 2837 3269 3780 4188 4714 5249 5558
2 50,80 2419 2792 3088 3469 3854 4076
NOTE: The above pressures should only be used for guidance - as applicable codes, design standards and allowable stresses may result in other values
31
TUBINGFRACTIONAL SIZES AND PRESSURE IN PSI 3.2
WORKING PRESSURE FOR SEAMLESS 22CR DUPLEX ̄UNS S31803 ²PSI³
Allowable stress = 22500 psi between -29 degree C and 38 degree C, based on:ASTM A789 - minimum yield 450MPa and min. tensile strength 620MPa.Safety factor= 4 - for 90000psi (620MPa)
TUBE WALL THICKNES (Inch)
TUBE O.D.
(Inch)
TUBE OD (mm) (Info
only)0,028 0,035 0,049 0,065 0,083 0,095 0,109 0,120 0,134 0,148 0,156
1/8 3,18 11991 152013/16 4,76 7632 9811 141501/4 6,35 5536 7095 10355 14073
5/16 7,94 4343 5536 8068 110563/8 9,53 3573 4539 6566 9038 118351/2 12,70 2638 3337 4785 6529 8614 100055/8 15,88 2638 3764 5105 6686 7787 91003/4 19,05 2181 3102 4191 5464 6343 7400 82577/8 22,23 1860 2638 3554 4619 5350 6226 6932 78541 25,40 1620 2295 3085 4001 4627 5374 5973 6754
1 1/4 31,75 2442 3156 3641 4218 4679 5277 5885 62391 1/2 38,10 2605 3002 3472 846 4329 4820 5105
2 50,80 2222 2564 2836 3186 3540 3744
NOTE: The above pressures should only be used for guidance - as applicable codes, design standards and allowable stresses may result in other values
33
Content
4.1 Elbows 34
4.2 Tees 39
4.3 Reducers 46
4.4 Caps 51
4.5 Lap-Joint Stub Ends 53
4.6 Manifold Fittings 54
4.7 Tolerances 55
4.8 Bevel Types 57
4.9 Weight 58
4BUTTŠWELD FITTINGS
34
ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.1
LONG RADIUS ELBOWS
A
A
T ID
OD
T
B
B
ID
OD
ASME B16.9 MSS SP-75
NB O.D. at Bevel A (mm) B (mm) NB O.D. at Bevel A (mm) B (mm)
1/2 21,3 38,1 15,93/4 26,7 38,1 19,11 33,4 38,1 22,2
1 1/4 42,2 47,6 25,41 1/2 48,3 57,2 28,6
2 60,3 76,2 34,92 1/2 73,0 95,3 44,5
3 88,9 114,3 50,83 1/2 101,6 133,4 57,2
4 114,3 152,4 63,55 141,3 190,5 79,46 168,3 228,6 95,38 219,1 304,8 127,0
10 273,1 381,0 158,712 323,9 457,2 190,514 355,6 533,4 222,316 406,4 609,6 254,0 16 406,4 609,6 254,018 457,2 685,8 285,8 18 457,2 685,8 285,820 508,0 762,0 317,5 20 508,0 762,0 317,522 558,8 838,2 342,9 22 558,8 838,2 342,924 609,6 914,4 381,0 24 609,6 914,4 381,026 660,4 990,6 406,4 26 660,4 990,6 406,428 711,2 1066,8 438,230 762,0 1143,0 469,9 30 762,0 1143,0 469,932 812,8 1219,2 501,734 863,6 1295,4 533,4 34 863,6 1295,4 533,436 914,4 1371,6 565,2 36 914,4 1371,6 565,238 965,2 1447,8 600,1 38 965,2 1447,8 600,140 1016,0 1524,0 631,8 40 1016,0 1524,0 631,842 1066,8 1600,2 660,4 42 1066,8 1600,2 660,444 1117,6 1676,4 695,3 44 1117,6 1676,4 695,346 1168,4 1752,6 727,1 46 1168,4 1752,6 727,148 1219,2 1828,8 758,8 48 1219,2 1828,8 758,8
45°90°
35
BUTT¯WELD FITTINGSASME B16.9 4.1
LONG RADIUS BENDS
K
O
ID
OD
T
ASME B16.9
NB O.D. at Bevel O (mm) K (mm)
1/2 21,3 76,2 47,63/4 26,7 57,2 or 76,2 42,9 or 50,81 33,4 76,2 55,6
1 1/4 42,2 95,3 69,91 1/2 48,3 114,3 82,6
2 60,3 152,4 106,42 1/2 73,0 190,5 131,8
3 88,9 228,6 158,83 1/2 101,6 266,7 184,2
4 114,3 304,8 209,65 141,3 381,0 261,96 168,3 457,2 312,78 219,1 609,6 414,3
10 273,1 762,0 514,512 323,9 914,4 619,114 355,6 1066,8 711,216 406,4 1219,2 812,818 457,2 1371,6 914,420 508,0 1524,0 1016,022 558,8 1676,4 1117,624 609,6 1828,8 1219,2
180°
36
ASME B16.28BUTT¯WELD FITTINGS4.1
SHORT RADIUS ELBOWS
ASME B16.28 (mm)
NB O.D. at Bevel D Centre to End A
1 33,40 25,40
1 1/4 42,16 31,75
1 1/2 48,26 38,10
2 60,33 50,80
2 1/2 73,03 63,50
3 88,90 76,20
3 1/2 101,60 88,90
4 114,30 101,60
5 141,30 127,00
6 168,28 152,40
8 219,08 203,20
10 273,05 254,00
12 323,85 304,80
14 355,60 355,60
16 406,40 406,40
18 457,20 457,20
20 508,00 508,00
22 558,80 558,80
24 609,60 609,60
90°
A
A
T ID
OD
37
BUTT¯WELD FITTINGSASME B16.28 4.1
SHORT RADIUS 180° RETURNS
ASME B16.28 (mm)
NB O.D. at Bevel D Centre to End O Back to Face K
1 33,40 50,80 41,28
1 1/4 42,16 63,50 52,39
1 1/2 48,26 76,20 61,91
2 60,33 101,60 80,96
2 1/2 73,03 127,00 100,01
3 88,90 152,40 120,65
3 1/2 101,60 177,80 139,70
4 114,30 203,20 158,75
5 141,30 254,00 196,85
6 168,28 304,80 236,54
8 219,08 406,40 312,74
10 273,05 508,00 390,53
12 323,85 609,60 466,73
14 355,60 711,20 533,40
16 406,40 812,80 609,60
18 457,20 914,40 685,80
20 508,00 1016,00 762,00
22 558,80 1117,60 838,20
24 609,60 1219,20 914,40
K
O
ID
OD
T
38
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 ASME B16.9/ASME B16.28BUTT¯WELD FITTINGS4.1
3D AND 5D BEND
Diameter ND (mm) 3D (mm) 5D (mm)
2 50,4 151,2 2523 76,2 228,6 381
4 101,6 304,8 508
5 127 381 635
6 152,4 457,2 762
8 203,2 609,6 1016
10 254 762 1270
12 304,8 914,4 1524
D
3D
D
5D
3D BEND 5D BEND
39
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
EQUAL TEES
ID
OD
IDOD
T
T
C C
M
ASME B16.9 MSS SP-75
NB O.D. at Bevel C (mm) M (mm) NB O.D. at Bevel C (mm) M (mm)
1/2 21,3 25,4 25,43/4 26,7 28,6 28,61 33,4 38,1 38,1
1 1/4 42,2 47,6 47,61 1/2 48,3 57,2 57,2
2 60,3 63,5 63,52 1/2 73,0 76,2 76,2
3 88,9 85,7 85,73 1/2 101,6 95,3 95,3
4 114,3 104,8 104,85 141,3 123,8 123,86 168,3 142,9 142,98 219,1 177,8 177,8
10 273,1 215,9 215,912 323,9 254,0 254,014 355,6 279,4 279,416 406,4 304,8 304,8 16 406,4 304,8 304,818 457,2 342,9 342,9 18 457,2 342,9 342,920 508,0 381,0 381,0 20 508,0 381,0 381,022 558,8 419,1 419,1 22 558,8 419,1 419,124 609,6 431,8 431,8 24 609,6 431,8 431,826 660,4 495,3 495,3 26 660,4 495,3 495,328 711,2 520,7 520,730 762,0 558,8 558,8 30 762,0 558,8 558,832 812,8 596,9 596,934 863,6 635,0 635,0 34 863,6 635,0 635,036 914,4 673,1 673,1 36 914,4 673,1 673,138 965,2 711,2 711,2 38 965,2 711,2 711,240 1016,0 749,3 749,3 40 1016,0 749,3 749,342 1066,8 762,0 711,2 42 1066,8 762,0 711,244 1117,6 812,8 762,0 44 1117,6 812,8 762,046 1168,4 850,9 800,1 46 1168,4 850,9 800,148 1219,2 889,0 838,2 48 1219,2 889,0 838,2
BUTT¯WELD FITTINGS 4.2ASME B16.9/ MSS SP¯75
40
ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.2
REDUCING OUTLET TEES
T
T
OD
M
OD
C C
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm) Run Outlet Run Outlet C (mm) M (mm)
1/2 3/8 21,3 17,2 25,4 25,41/2 1/4 21,3 13,7 25,4 25,43/4 1/2 26,7 21,3 28,6 28,63/4 3/8 26,7 17,2 28,6 28,61 3/4 33,4 26,7 38,1 38,11 1/2 33,4 21,3 38,1 38,1
1 1/4 1 42,2 33,4 47,6 47,61 1/4 3/4 42,2 26,7 47,6 47,61 1/4 1/2 42,2 21,3 47,6 47,61 1/2 1 1/4 48,3 42,2 57,2 57,21 1/2 1 48,3 33,4 57,2 57,21 1/2 3/4 48,3 26,7 57,2 57,21 1/2 1/2 48,3 21,3 57,2 57,2
2 1 1/2 60,3 48,3 63,5 60,32 1 1/4 60,3 42,2 63,5 57,22 1 60,3 33,4 63,5 50,82 3/4 60,3 26,7 63,5 44,5
2 1/2 2 73,0 60,3 76,2 69,92 1/2 1 1/2 73,0 48,3 76,2 66,72 1/2 1 1/4 73,0 42,2 76,2 63,52 1/2 1 73,0 33,4 76,2 57,2
3 2 1/2 88,9 73,0 85,7 82,63 2 88,9 60,3 85,7 76,23 1 1/2 88,9 48,3 85,7 73,03 1 1/4 88,9 42,2 85,7 69,9
3 1/2 3 101,6 88,9 95,3 92,13 1/2 2 1/2 101,6 73,0 95,3 88,9
3 1/2 2 101,6 60,3 95,3 82,6
3 1/2 1 1/2 101,6 48,3 95,3 79,44 3 1/2 114,3 101,6 104,8 101,64 3 114,3 88,9 104,8 98,44 2 1/2 114,3 73,0 104,8 95,3
41
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯75 4.2
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm) Run Outlet Run Outlet C (mm) M (mm)
4 2 114,3 60,3 104,8 88,94 1 1/2 114,3 48,3 104,8 85,75 4 141,3 114,3 123,8 117,55 3 1/2 141,3 101,6 123,8 114,35 3 141,3 88,9 123,8 111,15 2 1/2 141,3 73,0 123,8 108,05 2 141,3 60,3 123,8 104,86 5 168,3 141,3 142,9 136,56 4 168,3 114,3 142,9 130,26 3 1/2 168,3 101,6 142,9 127,06 3 168,3 88,9 142,9 123,86 2 1/2 168,3 73,0 142,9 120,78 6 219,1 168,3 177,8 168,38 5 219,1 141,3 177,8 161,98 4 219,1 114,3 177,8 155,68 3 1/2 219,1 101,6 177,8 152,4
10 8 273, 1 219,1 215,9 203,210 6 273, 1 168,3 215,9 193,710 5 273, 1 141,3 215,9 190,510 4 273, 1 114,3 215,9 184,212 10 323,9 273, 1 254,0 241,312 8 323,9 219,1 254,0 228,612 6 323,9 168,3 254,0 219,112 5 323,9 141,3 254,0 215,914 12 355,6 323,9 279,4 269,914 10 355,6 273, 1 279,4 257,214 8 355,6 219,1 279,4 247,714 6 355,6 168,3 279,4 238, 116 14 406,4 355,6 304,8 304,8 16 14 406,4 355,6 304,8 304,816 12 406,4 323,9 304,8 295,3 16 12 406,4 323,9 304,8 295,316 10 406,4 273, 1 304,8 282,6 16 10 406,4 273, 1 304,8 282,616 8 406,4 219,1 304,8 273,1 16 8 406,4 219,1 304,8 273,116 6 406,4 168,3 304,8 263,5 16 6 406,4 168,3 304,8 263,518 16 457,2 406,4 342,9 330,2 18 16 457,2 406,4 342,9 330,218 14 457,2 355,6 342,9 330,2 18 14 457,2 355,6 342,9 330,218 12 457,2 323,9 342,9 320,7 18 12 457,2 323,9 342,9 320,718 10 457,2 273, 1 342,9 308,0 18 10 457,2 273, 1 342,9 308,018 8 457,2 219,1 342,9 298,5 18 8 457,2 219,1 342,9 298,520 18 508,0 475,2 381,0 368,3 20 18 508,0 475,2 381,0 368,320 16 508,0 406,4 381,0 355,6 20 16 508,0 406,4 381,0 355,620 14 508,0 355,6 381,0 355,6 20 14 508,0 355,6 381,0 355,620 12 508,0 323,9 381,0 346,1 20 12 508,0 323,9 381,0 346,1
42
ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.2
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm) Run Outlet Run Outlet C (mm) M (mm)
20 10 508,0 273, 1 381,0 333,4 20 10 508,0 273, 1 381,0 333,420 8 508,0 219,1 381,0 323,9 20 8 508,0 219,1 381,0 323,922 20 558,8 508,0 419, 1 406,4 22 20 558,8 508,0 419, 1 406,422 18 558,8 457,2 419, 1 393,7 22 18 558,8 457,2 419, 1 393,722 16 558,8 406,4 419, 1 381,0 22 16 558,8 406,4 419, 1 381,022 14 558,8 355,6 419, 1 381,0 22 14 558,8 355,6 419, 1 381,022 12 558,8 323,9 419, 1 371,5 22 12 558,8 323,9 419, 1 371,522 10 558,8 273, 1 419, 1 358,8 22 10 558,8 273, 1 419, 1 358,824 22 609,6 558,8 431,8 431,8 24 22 609,6 558,8 431,8 431,824 20 609,6 508,0 431,8 431,8 24 20 609,6 508,0 431,8 431,824 18 609,6 457,2 431,8 419,1 24 18 609,6 457,2 431,8 419,124 16 609,6 406,4 431,8 406,4 24 16 609,6 406,4 431,8 406,424 14 609,6 355,6 431,8 406,4 24 14 609,6 355,6 431,8 406,424 12 609,6 323,9 431,8 396,9 24 12 609,6 323,9 431,8 396,924 10 609,6 273,1 431,8 384,2 24 10 609,6 273,1 431,8 384,226 24 660,4 609,6 495,3 482,6 26 24 660,4 609,6 495,3 482,626 22 660,4 558,8 495,3 469,9 26 22 660,4 558,8 495,3 469,926 20 660,4 508,0 495,3 457,2 26 20 660,4 508,0 495,3 457,226 18 660,4 457,2 495,3 444,5 26 18 660,4 457,2 495,3 444,526 16 660,4 406,4 495,3 431,8 26 16 660,4 406,4 495,3 431,826 14 660,4 355,6 495,3 431,8 26 14 660,4 355,6 495,3 431,826 12 660,4 323,9 495,3 422,3 26 12 660,4 323,9 495,3 422,328 26 711,2 660,4 520,7 520,728 24 711,2 609,6 520,7 508,028 22 711,2 558,8 520,7 495,328 20 711,2 508,0 520,7 482,628 18 711,2 457,2 520,7 469,928 16 711,2 406,4 520,7 457,228 14 711,2 355,6 520,7 457,228 12 711,2 323,9 520,7 447,730 28 762,0 711,2 558,8 546,130 26 762,0 660,4 558,8 546,1 30 26 762,0 660,4 558,8 546,130 24 762,0 609,6 558,8 533,4 30 24 762,0 609,6 558,8 533,430 22 762,0 558,8 558,8 520,7 30 22 762,0 558,8 558,8 520,730 20 762,0 508,0 558,8 508,0 30 20 762,0 508,0 558,8 508,030 18 762,0 457,2 558,8 495,3 30 18 762,0 457,2 558,8 495,3
30 16 762,0 406,4 558,8 482,6 30 16 762,0 406,4 558,8 482,630 14 762,0 355,6 558,8 482,6 30 14 762,0 355,6 558,8 482,630 12 762,0 323,9 558,8 473,1 30 12 762,0 323,9 558,8 473,130 10 762,0 273,1 558,8 460,4 30 10 762,0 273,1 558,8 460,432 30 812,8 762,0 596,9 584,232 28 812,8 711,2 596,9 571,5
43
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯75 4.2
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm) Run Outlet Run Outlet C (mm) M (mm)
32 26 812,8 660,4 596,9 571,532 24 812,8 609,6 596,9 558,832 22 812,8 558,8 596,9 546,132 20 812,8 508,0 596,9 533,432 18 812,8 457,2 596,9 520,732 16 812,8 406,4 596,9 508,032 14 812,8 355,6 596,9 508,034 32 863,6 812,8 635,0 622,334 30 863,6 762,0 635,0 609,6 34 30 863,6 762,0 635,0 609,634 28 863,6 711,2 635,0 596,934 26 863,6 660,4 635,0 596,9 34 26 863,6 660,4 635,0 596,934 24 863,6 609,6 635,0 584,2 34 24 863,6 609,6 635,0 584,234 22 863,6 558,8 635,0 571,5 34 22 863,6 558,8 635,0 571,534 20 863,6 508,0 635,0 558,8 34 20 863,6 508,0 635,0 558,834 18 863,6 457,2 635,0 546,1 34 18 863,6 457,2 635,0 546,134 16 863,6 406,4 635,0 533,4 34 16 863,6 406,4 635,0 533,436 34 914,4 863,6 673,1 660,4 36 34 914,4 863,6 673,1 660,436 32 914,4 812,8 673,1 647,736 30 914,4 762,0 673,1 635,0 36 30 914,4 762,0 673,1 635,036 28 914,4 711,2 673,1 622,336 26 914,4 660,4 673,1 622,3 36 26 914,4 660,4 673,1 622,336 24 914,4 609,6 673,1 609,6 36 24 914,4 609,6 673,1 609,636 22 914,4 558,8 673,1 596,9 36 22 914,4 558,8 673,1 596,936 20 914,4 508,0 673,1 584,2 36 20 914,4 508,0 673,1 584,236 18 914,4 457,2 673,1 571,5 36 18 914,4 457,2 673,1 571,536 16 914,4 406,4 673,1 558,8 36 16 914,4 406,4 673,1 558,838 36 965,2 914,4 711,2 711,2 38 36 965,2 914,4 711,2 711,238 34 965,2 863,6 711,2 698,5 38 34 965,2 863,6 711,2 698,538 32 965,2 812,8 711,2 685,8 38 32 965,2 812,8 711,2 685,838 30 965,2 762,0 711,2 673,1 38 30 965,2 762,0 711,2 673,138 28 965,2 711,2 711,2 647,738 26 965,2 660,4 711,2 647,7 38 26 965,2 660,4 711,2 647,738 24 965,2 609,6 711,2 635,0 38 24 965,2 609,6 711,2 635,038 22 965,2 558,8 711,2 622,3 38 22 965,2 558,8 711,2 622,338 20 965,2 508,0 711,2 609,6 38 20 965,2 508,0 711,2 609,638 18 965,2 457,2 711,2 596,9 38 18 965,2 457,2 711,2 596,940 38 1016,0 965,2 749,3 749,3 40 38 1016,0 965,2 749,3 749,340 36 1016,0 914,4 749,3 736,6 40 36 1016,0 914,4 749,3 736,640 34 1016,0 863,6 749,3 723,9 40 34 1016,0 863,6 749,3 723,940 32 1016,0 812,8 749,3 711,2 40 32 1016,0 812,8 749,3 711,240 30 1016,0 762,0 749,3 698,5 40 30 1016,0 762,0 749,3 698,540 28 1016,0 711,2 749,3 673,1
44
ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.2
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm) Run Outlet Run Outlet C (mm) M (mm)
40 26 1016,0 660,4 749,3 673,1 40 26 1016,0 660,4 749,3 673,140 24 1016,0 609,6 749,3 660,4 40 24 1016,0 609,6 749,3 660,440 22 1016,0 558,8 749,3 647,7 40 22 1016,0 558,8 749,3 647,740 20 1016,0 508,0 749,3 635,0 40 20 1016,0 508,0 749,3 635,040 18 1016,0 457,2 749,3 622,3 40 18 1016,0 457,2 749,3 622,342 36 1066,8 914,4 762,0 711,2 42 36 1066,8 914,4 762,0 711,242 34 1066,8 863,6 762,0 711,2 42 34 1066,8 863,6 762,0 711,242 32 1066,8 812,8 762,0 711,2 42 32 1066,8 812,8 762,0 711,242 30 1066,8 762,0 762,0 711,2 42 30 1066,8 762,0 762,0 711,242 28 1066,8 711,2 762,0 698,5 42 28 1066,8 711,2 762,0 698,542 26 1066,8 660,4 762,0 698,5 42 26 1066,8 660,4 762,0 698,542 24 1066,8 609,6 762,0 660,4 42 24 1066,8 609,6 762,0 660,442 22 1066,8 558,8 762,0 660,4 42 22 1066,8 558,8 762,0 660,442 20 1066,8 508,0 762,0 660,4 42 20 1066,8 508,0 762,0 660,442 18 1066,8 457,2 762,0 647,7 42 18 1066,8 457,2 762,0 647,742 16 1066,8 406,4 762,0 635,0 42 16 1066,8 406,4 762,0 635,044 42 1117,6 1066,8 812,8 762,0 44 42 1117,6 1066,8 812,8 762,044 40 1117,6 1016,0 812,8 749,3 44 40 1117,6 1016,0 812,8 749,344 38 1117,6 965,2 812,8 736,6 44 38 1117,6 965,2 812,8 736,644 36 1117,6 914,4 812,8 723,9 44 36 1117,6 914,4 812,8 723,944 34 1117,6 863,6 812,8 723,9 44 34 1117,6 863,6 812,8 723,944 32 1117,6 812,8 812,8 711,2 44 32 1117,6 812,8 812,8 711,244 30 1117,6 762,0 812,8 711,2 44 30 1117,6 762,0 812,8 711,244 28 1117,6 711,2 812,8 698,544 26 1117,6 660,4 812,8 698,5 44 26 1117,6 660,4 812,8 698,544 24 1117,6 609,6 812,8 698,5 44 24 1117,6 609,6 812,8 698,544 22 1117,6 558,8 812,8 685,8 44 22 1117,6 558,8 812,8 685,844 20 1117,6 508,0 812,8 685,8 44 20 1117,6 508,0 812,8 685,846 44 1168,4 1117,6 850,9 800,1 46 44 1168,4 1117,6 850,9 800,146 42 1168,4 1066,8 850,9 787,4 46 42 1168,4 1066,8 850,9 787,446 40 1168,4 1016,0 850,9 774,7 46 40 1168,4 1016,0 850,9 774,746 38 1168,4 965,2 850,9 762,0 46 38 1168,4 965,2 850,9 762,0
46 36 1168,4 914,4 850,9 762,0 46 36 1168,4 914,4 850,9 762,046 34 1168,4 863,6 850,9 749,3 46 34 1168,4 863,6 850,9 749,346 32 1168,4 812,8 850,9 749,3 46 32 1168,4 812,8 850,9 749,346 30 1168,4 762,0 850,9 736,6 46 30 1168,4 762,0 850,9 736,646 28 1168,4 711,2 850,9 736,646 26 1168,4 660,4 850,9 736,6 46 26 1168,4 660,4 850,9 736,646 24 1168,4 609,6 850,9 723,9 46 24 1168,4 609,6 850,9 723,946 22 1168,4 558,8 850,9 723,9 46 22 1168,4 558,8 850,9 723,948 46 1219,2 1168,4 889,0 838,2 48 46 1219,2 1168,4 889,0 838,248 44 1219,2 1117,6 889,0 838,2 48 44 1219,2 1117,6 889,0 838,2
45
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯75 4.2
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel Run Outlet NB O.D. at Bevel Run Outlet
Run Outlet Run Outlet C (mm) M (mm) Run Outlet Run Outlet C (mm) M (mm)
48 42 1219,2 1066,8 889,0 812,8 48 42 1219,2 1066,8 889,0 812,848 40 1219,2 1016,0 889,0 812,8 48 40 1219,2 1016,0 889,0 812,848 38 1219,2 965,2 889,0 812,8 48 38 1219,2 965,2 889,0 812,848 36 1219,2 914,4 889,0 787,4 48 36 1219,2 914,4 889,0 787,448 34 1219,2 863,6 889,0 787,4 48 34 1219,2 863,6 889,0 787,448 32 1219,2 812,8 889,0 787,4 48 32 1219,2 812,8 889,0 787,448 30 1219,2 762,0 889,0 762,0 48 30 1219,2 762,0 889,0 762,048 28 1219,2 711,2 889,0 762,048 26 1219,2 660,4 889,0 762,0 48 26 1219,2 660,4 889,0 762,048 24 1219,2 609,6 889,0 736,6 48 24 1219,2 609,6 889,0 736,648 22 1219,2 558,8 889,0 736,6 48 22 1219,2 558,8 889,0 736,6
46
ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.3
REDUCERS
ODOD
T
T
OD
H
OD
T
T
H
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm) LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
3/4 3/8 26,7 17,2 38,13/4 1/2 26,7 21,3 38,11 3/4 33,4 26,7 50,81 1/2 33,4 21,3 50,8
1 1/4 1 42,2 33,4 50,81 1/4 3/4 42,2 26,7 50,81 1/4 1/2 42,2 21,3 50,81 1/2 1 1/4 48,3 42,2 63,51 1/2 1 48,3 33,4 63,51 1/2 3/4 48,3 26,7 63,51 1/2 1/2 48,3 21,3 63,5
2 1 1/2 60,3 48,3 76,22 1 1/4 60,3 42,2 76,22 1 60,3 33,4 76,22 3/4 60,3 26,7 76,2
2 1/2 2 73,0 60,3 88,92 1/2 1 1/2 73,0 48,3 88,92 1/2 1 1/4 73,0 42,2 88,92 1/2 1 73,0 33,4 88,9
3 2 1/2 88,9 73,0 88,93 2 88,9 60,3 88,93 1 1/2 88,9 48,3 88,93 1 1/4 88,9 42,2 88,9
3 1/2 3 101,6 88,9 101,63 1/2 2 1/2 101,6 73,0 101,63 1/2 2 101,6 60,3 101,63 1/2 1 1/2 101,6 48,3 101,6
3 1/2 1 1/4 101,6 42,2 101,6
NOTE: LE = Large End, SE= Small End
CONCENTRIC ECCCENTRIC
47
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯75 4.3
REDUCERS
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm) LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
4 3 1/2 114,3 101,6 101,64 3 114,3 88,9 101,64 2 1/2 114,3 73,0 101,64 2 114,3 60,3 101,64 1 1/2 114,3 48,3 101,65 4 141,3 114,3 127,15 3 1/2 141,3 101,6 127,05 3 141,3 88,9 127,05 2 1/2 141,3 73,0 127,05 2 141,3 60,3 127,06 5 168,3 141,3 139,76 4 168,3 114,3 139,76 3 1/2 168,3 101,6 139,76 3 168,3 88,9 139,76 2 1/2 168,3 73,0 139,78 6 219,1 168,3 152,48 5 219,1 141,3 152,48 4 219,1 114,3 152,48 3 1/2 219,1 101,6 152,4
10 8 273,1 219, 1 177,810 6 273,1 168,3 177,810 5 273,1 141,3 177,810 4 273,1 114,3 177,812 10 323,9 273,1 203,212 8 323,9 219, 1 203,212 6 323,9 168,3 203,212 5 323,9 141,3 203,214 12 355,6 323,9 330,214 10 355,6 273,1 330,214 8 355,6 219, 1 330,214 6 355,6 168,3 330,216 14 406,4 355,6 355,6 16 14 406,4 355,6 355,616 12 406,4 323,9 355,6 16 12 406,4 323,9 355,616 10 406,4 273,1 355,6 16 10 406,4 273,1 355,616 8 406,4 219, 1 355,6 16 8 406,4 219, 1 355,618 16 457,2 406,4 381,0 18 16 457,2 406,4 381,018 14 457,2 355,6 381,0 18 14 457,2 355,6 381,018 12 457,2 323,9 381,0 18 12 457,2 323,9 381,018 10 457,2 273,1 381,0 18 10 457,2 273,1 381,0
NOTE: LE = Large End, SE= Small End
48
ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.3
REDUCERS
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm) LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
20 18 508,0 457,2 508,0 20 18 508,0 457,2 508,020 16 508,0 406,4 508,0 20 16 508,0 406,4 508,020 14 508,0 355,6 508,0 20 14 508,0 355,6 508,020 12 508,0 323,9 508,0 20 12 508,0 323,9 508,022 20 558,8 508,0 508,0 22 20 558,8 508,0 508,022 18 558,8 457,2 508,0 22 18 558,8 457,2 508,022 16 558,8 406,4 508,0 22 16 558,8 406,4 508,022 14 558,8 355,6 508,0 22 14 558,8 355,6 508,024 22 609,6 558,8 508,0 24 22 609,6 558,8 508,024 20 609,6 508,0 508,0 24 20 609,6 508,0 508,024 18 609,6 457,2 508,0 24 18 609,6 457,2 508,024 16 609,6 406,4 508,0 24 16 609,6 406,4 508,026 24 660,4 609,6 609,6 26 24 660,4 609,6 609,626 22 660,4 558,8 609,6 26 22 660,4 558,8 609,626 20 660,4 508,0 609,6 26 20 660,4 508,0 609,626 18 660,4 457,2 609,6 26 18 660,4 457,2 609,628 26 711,2 660,4 609,628 24 711,2 609,6 609,628 20 711,2 508,0 609,628 18 711,2 457,2 609,630 28 762,0 711,2 609,630 26 762,0 660,4 609,6 30 26 762,0 660,4 609,630 24 762,0 609,6 609,6 30 24 762,0 609,6 609,630 20 762,0 508,0 609,6 30 20 762,0 508,0 609,632 30 812,8 762,0 609,632 28 812,8 711,2 609,632 26 812,8 660,4 609,632 24 812,8 609,6 609,634 32 863,6 812,8 609,634 30 863,6 762,0 609,6 34 30 863,6 762,0 609,634 26 863,6 660,4 609,6 34 26 863,6 660,4 609,634 24 863,6 609,6 609,6 34 24 863,6 609,6 609,636 34 914,4 863,6 609,6 36 34 914,4 863,6 609,636 32 914,4 812,8 609,636 30 914,4 762,0 609,6 36 30 914,4 762,0 609,636 26 914,4 660,4 609,6 36 26 914,4 660,4 609,636 24 914,4 609,6 609,6 36 24 914,4 609,6 609,638 36 965,2 914,4 609,6 38 36 965,2 914,4 609,638 34 965,2 863,6 609,6 38 34 965,2 863,6 609,6
NOTE: LE = Large End, SE= Small End
49
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯75 4.3
REDUCERS
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm) LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
38 32 965,2 812,8 609,6 38 32 965,2 812,8 609,638 30 965,2 762,0 609,6 38 30 965,2 762,0 609,638 28 965,2 711,2 609,638 26 965,2 660,4 609,6 38 26 965,2 660,4 609,6
38 24 965,2 609,6 609,638 22 965,2 558,8 609,638 20 965,2 508,0 609,6
40 38 1016,0 965,2 609,6 40 38 1016,0 965,2 609,640 36 1016,0 914,4 609,6 40 36 1016,0 914,4 609,640 34 1016,0 863,6 609,6 40 34 1016,0 863,6 609,640 32 1016,0 812,8 609,6 40 32 1016,0 812,8 609,640 30 1016,0 762,0 609,6 40 30 1016,0 762,0 609,6
40 26 1016,0 660,4 609,640 24 1016,0 609,6 609,640 22 1016,0 558,8 609,640 20 1016,0 508,0 609,6
42 40 1066,8 1016,0 609,642 38 1066,8 965,2 609,642 36 1066,8 914,4 609,6 42 36 1066,8 914,4 609,642 34 1066,8 863,6 609,6 42 34 1066,8 863,6 609,642 32 1066,8 812,8 609,6 42 32 1066,8 812,8 609,642 30 1066,8 762,0 609,6 42 30 1066,8 762,0 609,6
42 26 1066,8 660,4 609,642 24 1066,8 609,6 609,6
44 42 1117,6 1066,8 609,6 44 42 1117,6 1066,8 609,644 40 1117,6 1016,0 609,6 44 40 1117,6 1016,0 609,644 38 1117,6 965,2 609,6 44 38 1117,6 965,2 609,644 36 1117,6 914,4 609,6 44 36 1117,6 914,4 609,6
44 34 1117,6 863,6 609,644 32 1117,6 812,8 609,644 30 1117,6 762,0 609,644 26 1117,6 660,4 609,644 24 1117,6 609,6 609,644 22 1117,6 558,8 609,6
46 44 1168,4 1117,6 711,2 46 44 1168,4 1117,6 711,246 42 1168,4 1066,8 711,2 46 42 1168,4 1066,8 711,246 40 1168,4 1016,0 711,2 46 40 1168,4 1016,0 711,246 38 1168,4 965,2 711,2 46 38 1168,4 965,2 711,2
46 36 1168,4 914,4 711,2
NOTE: LE = Large End, SE= Small End
50
ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.3
REDUCERS
REDUCING OUTLET TEES
ASME B16.9 MSS SP-75
NB O.D. at Bevel NB O.D. at Bevel
LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm) LE (Inch) SE (Inch) LE (mm) SE (mm) H (mm)
46 34 1168,4 863,6 711,246 32 1168,4 812,8 711,246 30 1168,4 762,0 711,246 26 1168,4 660,4 711,246 24 1168,4 609,6 711,2
48 46 1219,2 1168,4 711,2 48 46 1219,2 1168,4 711,248 44 1219,2 1117,6 711,2 48 44 1219,2 1117,6 711,248 42 1219,2 1066,8 711,2 48 42 1219,2 1066,8 711,248 40 1219,2 1016,0 711,2 48 40 1219,2 1016,0 711,2
48 38 1219,2 965,2 711,248 36 1219,2 914,4 711,248 34 1219,2 863,6 711,248 32 1219,2 812,8 711,248 30 1219,2 762,0 711,248 26 1219,2 660,4 711,248 24 1219,2 609,6 711,2
NOTE: LE = Large End, SE= Small End
51
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯75 4.4
END CAPS
ID
E(E1)
OD
T
END CAPS
ASME B16.9 MSS SP-75
NB (Inch)
O.D. at Bevel (mm)
# E (mm)
Limiting W.T. for
Length E (mm)
E1 (3) (mm)
NB (Inch)
O.D. at Bevel (mm)
# E (mm)
Limiting W.T. for
Length E (mm)
E1 (mm)
1/2 21,3 25,4 3,7 25,43/4 26,7 25,4 3,9 25,41 33,4 38,1 4,6 38,1
1 1/4 42,2 38,1 4,9 38,11 1/2 48,3 38,1 5,1 38,1
2 60,3 38,1 5,5 44,52 1/2 73,0 38,1 7,0 50,8
3 88,9 50,8 7,6 63,53 1/2 101,6 63,5 8,1 76,2
4 114,3 63,5 8,6 76,25 141,3 76,2 9,5 88,96 168,3 88,9 11,0 101,68 219,1 101,6 12,7 127,0
10 273,1 127,0 12,7 152,412 323,9 152,4 12,7 177,814 355,6 165,1 12,7 190,516 406,4 177,8 12,7 203,2 16 406,4 177,8 25,4 203,218 457,2 203,2 12,7 228,6 18 457,2 203,2 25,4 228,620 508,0 228,6 12,7 254,0 20 508,0 228,6 25,4 254,022 558,8 254,0 12,7 254,0 22 558,8 254,0 25,4 254,024 609,6 266,7 12,7 304,8 24 609,6 266,7 25,4 304,826 660,4 266,7 26 660,4 266,7 25,4 304,828 711,2 266,730 762,0 266,7 30 762,0 266,7 25,4 304,832 812,8 266,734 863,6 266,7 34 863,6 266,7 25,4 304,836 914,4 266,7 36 914,4 266,7 25,4 304,8
38 965,2 304,8 38 965,2 304,8 25,4 342,9
40 1016,0 304,8 40 1016,0 304,8 25,4 342,9
52
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.4
END CAPS
NOTE: The shape of these caps shall be ellipsoidal and shall conform to the shape requirements as given in ASME Boiler and Pressure Vessel Code.
# Length E applies for thickness not exceeding that given in column “Limiting Wall Thickness for Length E”
1 Length E1 applies for thicknessgreater than that given in column “Limiting Wall Thickness “ for sizes 24in. and smaller. For sizes 26in. and larger, length E1, shall be by agreement between manufacturer and purchaser.
END CAPS
ASME B16.9 MSS SP-75
NB (Inch)
O.D. at Bevel (mm)
# E (mm)
Limiting W.T. for
Length E (mm)
E1 (3) (mm)
NB (Inch)
O.D. at Bevel (mm)
# E (mm)
Limiting W.T. for
Length E (mm)
E1 (mm)
42 1066,8 304,8 42 1066,8 304,8 25,4 342,9
44 1117,6 342,9 44 1117,6 342,9 25,4 281,0
46 1168,4 342,9 46 1168,4 342,9 25,4 281,0
48 1219,2 342,9 48 1219,2 342,9 25,4 281,0
53
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
STUB ENDS
LAP-JOINT STUB ENDS
ASME B16.9 - long type ASME B16.9 - Short type / MSS-SP 43 Type A
NB (Inch)
O.D. at Bevel (mm)
F (mm)
Rad. of Fillet R (mm)
DIA. Of Lap G (mm)
O.D. of Barrel (mm) NB
(Inch)
O.D. at Bevel (mm)
F (mm)
Rad. of Fillet R (mm)
DIA. Of Lap G (mm)
O.D. of Barrel (mm)
Max. Min. Max. Min.
1/2 21,3 76,2 3,2 34,9 22,8 20,6 1/2 21,3 50,8 3,2 34,9
3/4 26,7 76,2 3,2 42,9 28,1 25,9 3/4 26,7 50,8 3,2 42,91 33,4 101,6 3,2 50,8 35,0 32,6 1 33,4 50,8 3,2 50,8
1 1/4 41,2 101,6 4,8 63,5 43,6 41,4 1 1/4 41,2 50,8 4,8 63,51 1/2 48,3 101,6 6,4 73,0 49,9 47,5 1 1/2 48,3 50,8 6,4 73,0
2 60,3 152,4 7,9 92,1 62,4 59,5 2 60,3 63,5 7,9 92,12 1/2 73,0 152,4 7,9 104,8 75,3 72,2 2 1/2 73,0 63,5 7,9 104,8
3 88,9 152,4 9,5 127,0 91,3 88,1 3 88,9 63,5 9,5 127,03 1/2 101,6 152,4 9,5 139,7 104,0 100,8 3 1/2 101,6 76,2 9,5 139,7
4 114,3 152,4 11,1 157,2 116,7 113,5 4 114,3 76,2 11,1 157,25 141,3 203,2 11,1 185,7 144,4 140,5 5 141,3 76,2 11,1 185,76 168,3 203,2 12,7 215,9 171,3 167,5 6 168,3 88,9 12,7 215,98 219,1 203,2 12,7 269,9 222,1 218,3 8 219,1 101,6 12,7 269,910 273,1 254,0 12,7 323,9 277,2 272,3 10 273,1 127,0 12,7 323,912 323,9 254,0 12,7 381,0 328,0 323, 1 12 323,9 152,4 12,7 381,014 355,6 304,8 12,7 412,8 359,9 354,8 14 355,6 152,4 12,7 412,816 406,4 304,8 12,7 469,9 411,0 405,6 16 406,4 152,4 12,7 469,918 457,2 304,8 12,7 533,4 462,0 456,4 18 457,2 152,4 12,7 533,420 508,0 304,8 12,7 584,2 514,1 507,2 20 508,0 152,4 12,7 584,222 558,8 304,8 12,7 641,4 564,9 558,024 609,6 304,8 12,7 692,2 615,7 608,8 24 609,6 152,4 12,7 692,2
F
G
R
R
T
Note (1)
Note (2)
Note squarecorner
NOTE: When used with the higher pressure flanges, it may be ne essary to increase the length of stub ends in sizes 12in and larger. Such increase in length shall be a matter of agreement between the manufacturer and purchaser.R - These dimensions conform to the radius established for lap-joint flanges in Ameri an National Standard Steel Pipe Flanges and Flanged Fittings ASME B16.5.G - The dimension conform to standard machined facings shown in the American National Standard Steel Pipe Flanges and Flanged Fittings ASME B16.5. The back face of the lap shall be machined to conform to the surface on which it seats. Where ring joint facings are to be applied use dimension ‘K’ as given in ASME B16.5.F - When special facings such as tongoue-groove, male-female, etc. are employed, additional lap thickness must be provided and such additional thickness shall be in addition to (not included in) the basic length ‘F”.
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯43 4.5
54
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 MANIFOLD FITTINGSBUTT¯WELD FITTINGS4.6
MANIFOLD FITTINGS
5.000 psi 10.000 psi
Max Cold Working Pressure 5.000 psi 10.000 psi
Max Test Pressure 10.000 psi 15.000 psi
Max Operation Temp. 400 deg F 400 deg F
Min. Operation Temp. -50 deg C -50 deg C
Nominal Sizes 2” to 6” 2” to 6”
Min. Yield Stress 52K psi 75K psi
MaterialCarbon
Manganese Steel
Low Alloy Steel
Manifold Fittings Nominal Dimensions in mm
Size (NB) A B C D E F G
2” 406,4 203,2 152,4 330,2 203,2 386,1
3” 406,4 203,2 152,4 330,2 304,8 203,2 386,1
4” 558,8 279,4 208,3 406,4 355,6 279,4 495,3
5” 609,6 304,8 241,3 482,6 406,4 292,1 586,56” 762 381 304,8 685,8 609,6 330,2 805,2
DESIGNED TO MEET INTERNATIONAL STANDARDManifold Fittings have been designed in accordance with the following standards:MSS-SP-75: Specifi ation for High Test Wrought Butt Weld Fittings.ASME B31.3: Chemical Plant and Petroleum Refinery PipingASME B16.9: Factory Made Wrought Steel Butt Weld Fittings.NACE MR-01-75: Sulfide St ess Cracking Resistant Metallic Material for Oilfield Equipment.ASME VIII: Division 1 Section 13.10 Boiler and Pressure Vessel Code.API 6A: Specifi ation for Wellhead and : Christmas Tree Equipment.
DESIGNED FOR HIGH PERFORMANCE UNDER HAZARDOUS CONDITIONSManifold Fittings have been designed to address a number of factors wich are vital in achieving high performance in hazardous oilfield servi e.
Erosion and corrosionAll fittings ha e wall thickness designed with ample erosion and corrosion allowance.
WeldabilityMaterial have been selected with particular emphasis of their weldability and compability with common piping materials.
Flow characteristicsThe internal bores of forged fittings a e machined on sophisticated computer controlled machining centres to ensure smooth uninterruptet transitions from bore to bore. Flow characteristics are enchanced to their maximum potential.
DependabilityBeing forged from billet in closed dies negates most, if not all, the problems with assosiated with hidden flaws Inhe ent in casting and plate. Throughout the working life of an Manifold Fittings you can be sure a consistently sound wall section is ever present.
DESIGNED IN TWO STANDARD PRODUCT LEVELSManufacturers provide levels of standard products to meet requirements for 5.000 psi and 10.000 psi services.
BC
A
EC
A
BC
G
C BC
C
B
C
C
B
G
C F C
Full Flow Cross
Long Sweep Full Flow Tee
Long Sweep 90° Elbow
Standpipe Gosseneck 160° With Top Outlet
Long Sweep Tee With Top Integral Bullplug
Standpipe Gooseneck With Top Integral Bullplug
Long Sweep Tee
Long Sweep 45° Elbow
55
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
TOLERANCES
Nomina Pipe SizeAngularity Tol.
Off Angle Q Off Plane P
1/2 - 4 0.8 1.65 - 8 1.6 3.2
10 - 12 2.4 4.814 - 16 2.4 6.418 - 24 3.2 9.526 - 30 4.8 9.532 - 42 4.8 12.744 - 48 4.8 19.1
TOLERANCE FOR ASME B16.9/B16.28
All Fittings
90-Deg and
45-Deg Elbows
and Tees
Reducers and Lap-
Joint Stub Ends
Caps 180-Deg Returns Lap-Joint Ends
Nominal Pipe Size
(Inch)
Outside* Diameter at Bevel (1), (2)
Inside Diameter at End (1),
(3), (4)
Wall Thickness
(3)
Centre-to End
Dimension A, B, C, M
Overall Length F, H
Overall Length E
Centre-to-Centre Dimension
O
Back-to-Face
Dimension K
Align-ment of Ends U
Outside Diameter of Lap G
Fillet Radius of
Lap R
+1.6 0 0
1 /2 - 2 1/2 -0.8 ±0.8 ±1.6 ±1.6 ±3.2 ±6.4 ±6.4 ±0.8 -0.8 -0.8
0 0
3 - 3 1/2 ±1.6 ±1.6
Not less than ±1.6 ±1.6 ±3.2 ±6.4 ±6.4 ±0.8 -0.8 -0.8
87.5 % 0 0
4 ±1.6 ±1.6 of ±1.6 ±1.6 ±3.2 ±6.4 ±6.4 ±0.8 -0.8 -1.6
+2.4 nominal 0 0
5 - 8 1.6 ±1.6 thick- ±1.6 ±1.6 ±6.4 ±6.4 ±6.4 ±0.8 -0.8 -1.6
+4.0 ness 0 0
10 - 18 -3.2 ±3.2 ±2.4 ±2.4 ±6.4 ±9.5 ±6.4 ±1.6 -1.6 -1.6
+6.4 0 0
20 - 24 -4.8 ±4.8 ±2.4 ±2.4 ±6.4 ±9.5 ±6.4 ±1.6 -1.6 -1.6
+6.4
26 - 30 -4.8 ±4.8 ±3.2 ±4.8 ±9.5 - - - - -
+6.4
32 - 48 -4.8 ±4.8 ±4.8 ±4.8 ±9.5 - - - - -
NOTE:1. Dimensions in mm2. Out-of-round is the sum of absolute values of plus and minus tolerance.3. This tolerance may be exceeded in localized areas of formed fittings whe e increased wall thicknss is required to
meet design requirements of para. 2.2.4. The inside diameter and the nominal wall thichknesses at ends are to be specified by the pu chaser.5. Unless otherwise specified by the pu chaser, these tolerances apply to the nominal inside diameter, which equals the
difference between the nominal outside and twice the nominal wall thickness .
BUTT¯WELD FITTINGSASME B16.9/ B16.28 4.7
56
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 MSS SP¯75BUTT¯WELD FITTINGS4.7
TOLERANCES
TOLERANCE FOR MSS SP - 75
All Fittings
Nominal Pipe Size
(Inch)
Inside (1) Diameter
at End
Wall (3) Thick-ness
Out-of-roundness (2)
Center-to-end Dimensions A, B, C, M
Overall Length H
Overall Length
E
Angularity Off Angle Q
Elbows Off
Plane
Reducers Off Plane
(6)
At ends of fitting Throughout Body of
Elbows (4)
Tees and 1.5R elbows
3R elbows Reducers Caps
Elbows (5) Other
16 to 24 ± 2.3 - 0.3 4.8 3.1 2.5% ± 2.3 ± 3.1 ± 2.3 ± 6.4 1.6 6.4 2.5%
26 to 36 ± 2.3 - 0.3 Note 5 3.1 2.5% ± 3.1 ± 6.4 ± 4.8 ± 9.7 2.3 12.7 2.5%
38 to 48 ± 3.1 - 0.3 Note 5 3.1 2.5% ± 4.8 ± 9.7 ± 9.7 ± 9.7 3.1 19.1 2.5%
A
AA A
O
K U U
C C
M
E(E1)HH
B
B
Q
QP
NOTE:1. Dimensions in mm2. The inside diameter at end shall be determined by circumferential measurements, and the tolerace refers to
variations from nominal l.D. calculations by (OD nom - (2t) nom).3. Out-of-roundness tolerances shall be the difference between the maximum and minimum diameters measured on
any radial cross-section.4. Minus 0.3 mm except that isolated non-continuous reduction are permitted in accordance with subsection 13.2.1
Excess thickness whether on inside or outside is to be treated in accordance with sketch given in Figure 3.5. When elbows are intended for field segm.enting, out-of- oundness tolerance may be furnished to 1 % by agreement
between the manufacturer and the purchaser. It is recognized that extra thickness, if any, may be on the l.D.6. Out-of-roundness toleraces at ends shall be 1 % of diameter for NPS 26 and larger.7. Percent of O.D.8. Outside diameter may be tapered at angle to 30° beyond weld bevel.
57
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
BEVEL TYPES
*t=20 max.
1,6 ± 0,8[Root face]
(a)PLAIN BEVEL
- 0°*30° + 5°
37,5° ± 2,5°
10° ± 1°
Rad.
20
t > 20
1,6 ± 0,8[Root face]
(b)COMPOUND BEVEL
t max 22,2
1,6 ± 0,8[Root face]
(a)PLAIN BEVEL
37,5° ± 2,5°37,5° ± 2,5°
10° ± 1°
Rad.
20
t > 22,2
1,6 ± 0,8[Root face]
(b)COMPOUND BEVEL
WELDING BEVEL FOR FITTINGS - MSS SP - 75 (MM)
WELDING BEVEL FOR FITTINGS - ASME B16.9/B16.28 (MM)
NOTE: Plain bevel up to » 25,4 mm at manufacturers option Plain bevel may be 37,5° up to » 24” at manufacturers option.
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯75 4.8
58
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.9
WEIGHT 90° ELBOWS, BUTT¯WELD FITTINGS ²LONG RADIUS³
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 10
Sch 20
Sch 30
Sch 40s
Std. Wall
Sch 40
Sch 60
Sch 80s
XSSch 80
Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15 0,03 0,05 0,06 0,06 0,09 0,09 0,12 0,12
3/4 20 0,04 0,07 0,08 0,08 0,11 0,11 0,15 0,15
1 25 0,07 0,14 0,15 0,15 0,2 0,2 0,28 0,38
1 1/4 32 0,1 0,23 0,26 0,26 0,35 0,35 0,44 0,6
1 1/2 40 0,15 0,3 0,4 0,4 0,55 0,55 0,65 0,95
2 50 0,3 0,5 0,7 0,7 0,95 0,95 1,4 1,7
2 1/2 65 0,55 0,85 1,4 1,4 1,5 1,5 2,5 3,2
3 80 1 1,25 2,5 2,5 2,9 2,9 3,75 5,5
3 1/2 90 1,2 1,65 3 3 4 4 - 8
4 100 1,6 2,1 4 4 6 6 7,5 9 12
5 125 2,7 3,65 6,8 6,8 9,3 9,3 12,7 15 18
6 150 4,4 4,45 11 11 16,8 16,8 23 26 29,5
8 200 8,8 10,2 17,25 19 22 22 27,25 34,8 34,8 38 40,5 52 55 54
10 250 16,8 18,15 25,85 33,15 41,5 41,5 53,9 53,9 53,9 61,16 75 85 97 109
12 300 24 27,25 37,2 49 60 60 61,25 81,7 80 80 107,4 123 140 157 180
14 350 28 39,95 50 59 70 70 70 83,00 109 94 94 135 188 190 224 247,45
16 400 38 51,6 64 78,3 95 95 95 125 162 125 125 202 260 274 323 367
18 450 48 65,4 82 99,85 139,15 120 120 176,15 231,5 158 158 290,55 390 405 422 545
20 500 58,4 84,9 100 146 194 146 146 228,35 311 194 194 390,45 476 508 607 770
22 550 - - 120 - - - 177,97 - - - 236 - - - - -
24 600 88 146 146 220 318,25 220 220 363,15 532,5 282 282 657,85 820 954 1100 1270
59
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
WEIGHT 90° ELBOWS, BUTT¯WELD FITTINGS ²SHORT RADIUS³
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 10
Sch 20
Sch 30
Sch 40s
Std. Wall
Sch 40
Sch 60
Sch 80s
XSSch 80
Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15 0,02 0,04 0,05 0,05 0,07 0,07
3/4 20 0,03 0,05 0,06 0,06 0,08 0,08
1 25 0,05 0,1 0,11 0,11 0,15 0,15
1 1/4 32 0,08 0,17 0,18 0,18 0,26 0,26
1 1/2 40 0,11 0,23 0,3 0,3 0,39 0,39
2 50 0,23 0,38 0,53 0,53 0,67 0,67
2 1/2 65 0,41 0,64 1,05 1,05 1,05 1,05
3 80 0,75 0,94 1,88 1,88 2,03 2,03
3 1/2 90 0,9 1,24 2,25 2,25 2,8 2,8
4 100 1,2 1,58 3 3 4,2 4,2 4,50
5 125 2,03 2,74 5,1 5,1 6,5 6,5 9,00
6 150 3,3 4,09 8,25 8,25 11,75 11,75 13,5
8 200 6,6 7,65 11,1 11,35 16,5 16,5 18,15 24,35 24,35 26,35 29 32
10 250 12,45 13,61 17,35 21,35 31,13 31,13 37,7 37,7 37,7 40,85 50 53 62
12 300 18 20,44 25 33,15 45 45 48 54,5 56 56 68 81,25 92 99
14 350 21 29,9 37,5 39,5 52,5 52,5 52,5 54,45 74 66 66 93,5 124 120 138,8
16 400 28,5 38,7 48 52,2 71,25 71,25 71,25 104,3 106,7 104,3 104,3 138 171,5 166 198
18 450 36 49,05 61,5 65,35 92,15 90 90 118 154,35 110,6 110,6 193 257,4 283 387
20 500 43,8 63,68 75 109,5 135,8 109,5 109,5 154,35 208 135,8 135,8 261 332 376 430
22 550 - - 90 - - - - - - - - - - - -
24 600 66 109,5 109,5 165 214,3 165 165 256,5 355,5 197,5 197,5 443,5 530 621 680
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯75 4.9
60
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.9
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 10
Sch 20
Sch 30
Sch 40s
Std. Wall
Sch 40
Sch 60
Sch 80s
XS Sch 80Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15 0,02 0,03 0,03 0,03 0,05 0,05 0,06 0,06
3/4 20 0,02 0,04 0,04 0,04 0,06 0,06 0,08 0,08
1 25 0,04 0,07 0,08 0,08 0,1 0,1 0,14 0,19
1 1/4 32 0,05 0,11 0,13 0,13 0,18 0,18 0,22 0,3
1 1/2 40 0,08 0,15 0,2 0,2 0,28 0,28 0,33 0,48
2 50 0,15 0,25 0,35 0,35 0,46 0,46 0,7 0,85
2 1/2 65 0,28 0,43 0,7 0,7 0,75 0,75 1,25 1,6
3 80 0,5 0,63 1,25 1,25 1,45 1,45 1,88 2,75
3 1/2 90 0,6 0,83 1,5 1,5 2 2 - 4
4 100 0,8 1,05 2 2 3 3 3,75 4,5 5,1
5 125 1,35 1,83 3,4 3,4 4,65 4,65 6,35 7,5 9
6 150 2,2 2,73 5,5 5,5 8,4 8,4 11,5 13 14,75
8 200 4,4 5,1 10 10 11 11 13,6 17,4 17,4 19 20,25 26 27,5 27
10 250 8,3 9,08 18,5 15,85 20,75 20,75 26,95 26,95 26,95 30,58 37,5 42,5 48,5 54,4
12 300 12 13,63 24,75 24,5 30 30 30,85 40,85 40 40 53,7 61,5 70 78,5 90
14 350 14 20,00 25 37 35 35 35 40,85 54,5 47 47 67,5 94 95 112 123,73
16 400 19 25,8 32 46,5 47,5 47,5 47,5 62,5 81 62,5 62,5 101 130 137 161,5 183
18 450 24 32,7 41 56 69,45 60 60 87,15 115,75 79 79 145,25 195 202,5 211 272,5
20 500 29,2 42,45 50 73 97 73 73 113,5 155,5 97 97 195,23 238 254 303,5 385
22 550 - - 60 - - - 88,98 - - - 118 - - - - -
24 600 44 73 73 110 159 110 110 190,65 266,5 141 141 333,93 410 477 545 635
WEIGHT 45° ELBOWS, BUTT¯WELD FITTINGS
61
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 10
Sch 20
Sch 30
Sch 40s
Std. Wall
Sch 40
Sch 60
Sch 80s
XSSch 80
Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15 0,01 0,01 0,03 0,03 0,05 0,05
3/4 20 0,02 0,02 0,06 0,06 0,09 0,09
1 25 0,04 0,05 0,1 0,1 0,13 0,13 0,15 0,2
1 1/4 32 0,05 0,07 0,14 0,14 0,19 0,19 0,23 0,3
1 1/2 40 0,08 0,1 0,2 0,2 0,23 0,23 0,3 0,35
2 50 0,1 0,13 0,25 0,25 0,3 0,3 0,55 0,6
2 1/2 65 0,14 0,18 0,35 0,35 0,45 0,45 0,9 1
3 80 0,25 0,36 0,7 0,7 0,85 0,85 1,45 1,8
3 1/2 90 0,4 0,5 1 1 1,3 1,3 - 2,75
4 100 0,43 0,55 1,1 1,1 1,6 1,6 2,5 2,75 3,5
5 125 0,8 1 2 2 2,7 2,7 4 5 5,5
6 150 1,2 1,5 3 3 4,4 4,4 6 7,5 8,1
8 200 2,2 2,75 4,5 5 5,5 5,5 7 8,35 8,35 11 15,5 18,5 15,45 13,15
10 250 3,6 4,45 6 8 9 9 13,6 13,6 13,6 16,25 21 30 28 28,5
12 300 6 7,5 10 13 15 15 19 25,5 22,5 22,5 29,5 32,5 41 42 44,5
14 350 6,4 8,17 14 13,5 16 16 16 24,5 38 27 27 36,3 50 47 52 59,6
16 400 8,4 10,67 18 18 21 21 21 31,5 52,5 31,5 31,5 52,25 64 59 73 79
18 450 10,4 13 22 22 30 26 26 42 66 36 36 72,5 75 88 93 104
20 500 13,6 17 29 34 42 34 34 56,75 94,5 42 42 98,5 96 105 153 170
22 550 - - 35,5 - - - 42 - - - 51 - - - - -
24 600 20,8 26 44 52 74,5 52 52 96,5 120 60 60 150 118 200 250 285
WEIGHT END CAPS, BUTT¯WELD FITTINGS
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯45 4.9
62
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.9
WEIGHT EQUAL TEES, BUTT¯WELD FITTINGS
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 10Sch 20
Sch 30
Sch 40s
Std. Wall
Sch 40
Sch 60
Sch 80s
XSSch 80
Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15 0,07 0,09 0,16 0,16 0,25 0,25 0,27 0,27
3/4 20 0,09 0,11 0,23 0,23 0,38 0,38 0,47 0,47
1 25 0,14 0,27 0,35 0,35 0,5 0,5 0,86 0,65
1 1/4 32 0,35 0,45 0,9 0,9 1,05 1,05 1,25 1,18
1 1/2 40 0,55 0,65 1,35 1,35 1,5 1,5 1,85 2
2 50 0,68 1,7 1,7 1,7 2,15 2,15 3,18 3
2 1/2 65 1,06 2,18 2,7 2,7 3 3 4 4,5
3 80 1,5 3 3,75 3,75 3,8 3,8 6,58 7,1
3 1/2 90 2 4,05 5 5 5,25 5,25 10,9
4 100 2,6 4,4 6,5 6,5 7,65 7,65 9 17 15
5 125 4 7,42 10 10 13,5 13,5 17,5 25 24
6 150 6,35 12,35 16 16 19,3 19,3 24 39,5 37,6
8 200 10,7 20 23 24,6 27 27 31,75 33 33 43,6 49,5 54 70,35 68
10 250 18 28,15 34,7 40 45 45 60 60 60 67,5 74 93 98,5 120,3
12 300 26 47,45 59 56,6 65 65 70,5 95 78 78 115 136,2 150 176,5 183,85
14 350 40,7 69,9 87,16 94,5 102 102 102 105 135 115 115 165 206 240 275 300
16 400 43,95 72,65 90,8 100 110 110 110 167 206,5 167 167 249 335 330 385 425
18 450 53,95 101,7 127,12 127 164 135 135 237,45 277 190 190 322 380 450 500 590
20 500 67,2 169,8 199,76 168 245 168 168 320 378,65 245 245 459 540 590 720 790
22 550 - - 220 - - - 220 - - - - - - - - -
24 600 95,9 306,45 310 240 373 240 240 570,65 653,75 350 350 748 910 1100 1180 1310
63
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
WEIGHT REDUCING TEES, BUTT¯WELD FITTINGS
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 10
Sch 20
Sch 30
Sch 40s
Std. Wall
Sch 40
Sch 60
Sch 80s
XSSch 80
Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15 0,07 0,09 0,16 0,16 0,25 0,25 0,27 0,27
3/4 20 0,09 0,11 0,23 0,23 0,38 0,38 0,47 0,47
1 25 0,14 0,27 0,35 0,35 0,5 0,5 0,86 0,65
1 1/4 32 0,35 0,45 0,9 0,9 1,05 1,05 1,25 1,18
1 1/2 40 0,55 0,65 1,35 1,35 1,5 1,5 1,85 2
2 50 0,68 1,7 1,7 1,7 2,15 2,15 3,18 3
2 1/2 65 1,06 2,18 2,7 2,7 3 3 4 4,2
3 80 1,5 3 3,75 3,75 3,8 3,8 6,13 6,6
3 1/2 90 2 4,05 5 5 5,25 5,25 10,9
4 100 2,6 4,4 6,5 6,5 7,65 7,65 9 15,9 15
5 125 4 7,42 10 10 13,5 13,5 17,5 23 23,15
6 150 5,6 12,35 14 14 19,3 19,3 24 32,7 37,6
8 200 10,7 20 23 24,6 27 27 31,75 33 33 43,6 49,5 49,25 55,6 51
10 250 17,45 26,3 33,15 38,6 43,5 43,5 55 55 55 65,83 63,5 88,5 95 113
12 300 25,25 47,45 59 56,6 63 63 70,5 95 78 78 106,24 124,85 140,85 158 163,45
14 350 40,7 69,9 87,16 94,5 102 102 102 105 135 115 115 162,28 206 235 275 300
16 400 43,95 72,65 90,8 100 110 110 110 167 206,5 167 167 200 335 320 360 410
18 450 53,95 101,7 127,12 127 164 135 135 237,45 256,5 190 190 278,87 380 440 475 550
20 500 67,2 169,8 199,76 168 218 168 168 265,1 350,5 218 218 405,42 540 570 680 770
22 550 - - 220 - - - 220 - - - 280 - - - - -
24 600 94,45 268,99 272 227 373 237 237 390,45 544,8 350 350 606,1 910 1060 1140 1270
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯45 4.9
64
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 ASME B16.9/ MSS SP¯75BUTT¯WELD FITTINGS4.9
WEIGHT CONCENTRIC REDUCERS, BUTT¯WELD FITTINGS
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 10
Sch 20
Sch 30
Sch 40s
Std. Wall
Sch 40
Sch 60
Sch 80s
XSSch 80
Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15
3/4 20 0,03 0,03 0,07 0,07 0,1 0,1 0,15 0,14
1 25 0,05 0,07 0,13 0,13 0,16 0,16 0,23 0,2
1 1/4 32 0,07 0,09 0,18 0,18 0,22 0,22 0,27 0,3
1 1/2 40 0,12 0,14 0,26 0,26 0,35 0,35 0,48 0,45
2 50 0,15 0,23 0,41 0,41 0,57 0,57 0,95 0,9
2 1/2 65 0,32 0,41 0,77 0,77 1,01 1,01 1,35 1,35
3 80 0,4 0,5 1 1 1,35 1,35 1,9 1,8
3 1/2 90 0,55 0,68 1,3 1,3 1,89 1,89 - 3,2
4 100 0,65 0,82 1,6 1,6 2,27 2,27 3,65 3,65 6,35
5 125 1,1 1,35 2,75 2,75 3,92 3,92 6,35 6,35 9
6 150 1,6 2 3,95 3,95 5,94 5,94 7,5 10 14,5
8 200 2,6 3,27 5 5,58 6,5 6,5 8 9,86 9,86 11,8 13,5 16,35 16,5
10 250 4,3 5,45 7,25 8,99 10,7 10,7 14,48 14,48 14,48 17,25 20,45 24,5 28,5 29,5
12 300 6 7,7 9,7 13,21 15 15 16,35 22,25 19,79 19,79 28,15 32,65 38,15 44,25 49
14 350 11 13,6 23 22,25 26,85 26,85 26,85 31,3 41,75 35,55 35,55 52,25 64 73 78 86
16 400 13,25 16,35 28 27,5 33,15 33,15 33,15 44 56,75 44 44 73,5 83 97 112 121
18 450 16 19,98 34 33,5 46,76 40 40 59,5 77,4 53,12 53,12 97,6 116 136 145 159
20 500 24 29,75 50 59,45 79 59,45 59,45 93 124,85 79 79 159 163 178 305 340
22 550 - - 57 - - - 65,35 - - - 86,71 - - - - -
24 600 28,7 36,32 63 71,7 107,14 71,7 71,7 129,4 180,7 95,34 95,34 228 241 295 540 610
NOTE: Weights are of the smallest reduction, i.e. the heaviest
65
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
WEIGHT ECCENTRIC REDUCERS, BUTT¯WELD FITTINGS
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 10
Sch 20
Sch 30
Sch 40s
Std. Wall
Sch 40
Sch 60
Sch 80s
XSSch 80
Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15
3/4 20 0,03 0,03 0,07 0,07 0,1 0,1 0,15 0,14
1 25 0,05 0,07 0,13 0,13 0,16 0,16 0,23 0,2
1 1/4 32 0,07 0,09 0,18 0,18 0,22 0,22 0,27 0,3
1 1/2 40 0,12 0,14 0,26 0,26 0,35 0,35 0,48 0,45
2 50 0,15 0,23 0,41 0,41 0,57 0,57 0,95 0,9
2 1/2 65 0,32 0,41 0,77 0,77 1,01 1,01 1,35 1,35
3 80 0,4 0,5 1 1 1,35 1,35 1,9 1,8
3 1/2 90 0,55 0,68 1,3 1,3 1,89 1,89 - 3,2
4 100 0,65 0,82 1,6 1,6 2,27 2,27 3,65 3,65 6,35
5 125 1,1 1,35 2,75 2,75 3,92 3,92 6,35 6,35 9
6 150 1,6 2 3,95 3,95 5,94 5,94 7,5 10 14,5
8 200 2,6 3,27 5 5,58 6,5 6,5 8 9,86 9,86 11,8 13,5 16,35 16,5
10 250 4,3 5,45 7,25 8,99 10,7 10,7 14,48 14,48 14,48 17,25 20,45 24,5 28,5 29,5
12 300 6 7,7 9,7 13,21 15 15 16,35 22,25 19,79 19,79 28,15 32,65 38,15 44,25 49
14 350 11 13,6 23 22,25 26,85 26,85 26,85 31,3 41,75 35,55 35,55 52,25 64 73 78 86
16 400 13,25 16,35 28 27,5 33,15 33,15 33,15 44 56,75 44 44 73,5 83 97 112 121
18 450 16 19,98 34 33,5 46,76 40 40 59,5 77,4 53,12 53,12 97,6 116 136 145 159
20 500 24 29,75 50 59,45 79 59,45 59,45 93 124,85 79 79 159 163 178 305 340
22 550 - - 57 - - - 65,35 - - - 86,71 - - - - -
24 600 28,7 36,32 63 71,7 107,14 71,7 71,7 129,4 180,7 95,34 95,34 228 241 295 540 610
NOTE: Weights are of the smallest reduction, i.e. the heaviest
BUTT¯WELD FITTINGSASME B16.9/ MSS SP¯45 4.9
66
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2 ASME B16.9BUTT¯WELD FITTINGS4.9
WEIGHT STUB ENDS, BUTT¯WELD FITTINGS
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 10
Sch 20
Sch 30
Std. Wall
Sch 40
Sch 60
XSSch 80
Sch 100
Sch 120
Sch 140
Sch 160
XXS
1/2 15 0,13 0,14 0,3
3/4 20 0,18 0,2 0,35
1 25 0,29 0,38 0,5 0,66
1 1/4 32 0,41 0,54 0,67 0,95
1 1/2 40 0,54 0,67 0,9 1,2
2 50 0,98 1,34 2,01 2,46
2 1/2 65 1,54 2,05 2,69 3,71
3 80 2,1 2,8 3,93 5,18
3 1/2 90 2,47 2,94 6,25
4 100 2,99 4,17 5,27 6,29 7,68
5 125 5,22 7,41 9,6 11,79 13,84
6 150 6,79 10,27 13,04 16,25 19,2
8 200 7,99 8,84 10,28 12,81 15,63 18,21 21,83 24,55 26,79 26,16
10 250 12,1 14,87 17,86 23,8 23,94 28,13 33,57 38,98 45,54 50,45
12 300 14,64 19,29 21,88 23,21 32,23 29,38 38,84 47,32 55,8 62,05 71,43
14 350 18 15,8 28,57 28,57 32,59 44,2 39,73 54,92
16 400 19,75 16,65 32,14 32,14 43,3 56,7 42,86 71,88
18 450 24,25 21,3 44,2 38 56,25 74,2 50 91,52
20 500 36 31,7 55,8 41,96 65,63 88,4 55,81 112,1
22 550 42,95 37 65 46,88 78 109 62,07 142
24 600 50,05 45,55 75,9 50,45 91,52 129 67,41 160
67
BUTT˝WELD FITTINGSASME B16.9/ MSS SP˝75 7.2
WEIGHT STUB ENDS, BUTT¯WELD FITTINGS
N.B SIZE APPROXIMATE WEIGHTS IN Kg
Inch mmSch 5s
Sch 10s
Sch 40s
Sch 80s
1/2 15 0,03 0,04 0,09 0,12
3/4 20 0,04 0,06 0,12 0,16
1 25 0,06 0,08 0,15 0,22
1 1/4 32 0,08 0,1 0,2 0,31
1 1/2 40 0,11 0,14 0,28 0,39
2 50 0,17 0,2 0,41 0,69
2 1/2 65 0,25 0,33 0,66 1,05
3 80 0,35 0,44 0,89 1,46
3 1/2 90 0,5 0,63 1,26 1,54
4 100 0,61 0,76 1,52 2,49
5 125 1,06 1,33 2,66 3,55
6 150 1,2 1,51 3,02 5,49
8 200 2,09 2,61 5,22 9,97
10 250 3,63 4,54 9,08 13,75
12 300 5,33 6,67 13,25 19,64
14 350 5,81 7,26 14,53 29
16 400 6,54 8,17 16,34 37,5
18 450 7,72 9,65 19,3 49,25
20 500 8,54 10,67 21,34 60
22 550 9,8 11,6 23 77,5
24 600 10,26 12,83 25,65 88,25
BUTT¯WELD FITTINGSMSS SP¯43 4.9
6868
69
Content
5.1 Elbows 70
5.2 Tees 75
5.3 Reducers 77
5.4 Bushings 78
5.5 Caps 79
5.6 Crosses 81
5.7 Couplings 83
5.8 Plugs 85
5.9 Pipe Nipples 86
5.10 Unions 87
5.11 Swage Nipples 89
5.12 Bosses 90
5.13 Taper Pipe Threads, NPT 91
5.14 Weight of Fittings 92
5FORGED FITTINGS
70
ASME B16.11FORGED FITTINGS ¦ THREADED5.1
ELBOWS
BT
C
90° ELBOWS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B 22,4 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 91,9 109,5 146,1C 20,6 20,6 24,6 28,4 33,3 38,1 44,5 50,8 60,5 76,2 85,9 106,4
2000 LB T 3,2 3,2 3,2 3,2 3,2 3,7 3,9 4,0 4,3 5,6 6,0 6,6App Wt
Kg 0,14 0,14 0,13 0,22 0,32 0,47 0,74 0,93 1,54 2,98 4,54 13,28
B 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 152,4C 20,6 24,6 28,4 33,3 38,1 44,5 50,8 60,5 63,5 82,6 95,3 114,3
3000 LB T 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,6 5,5 7,6 8,8 11,2App Wt
Kg 0,14 0,14 0,27 0,42 0,65 1,04 1,3 2,22 2,47 7,34 7,78 13,28
B 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 146,1 152,4C 24,6 28,4 33,3 38,1 44,5 50,8 60,5 76,2 82,6 95,3 106,4 114,3
6000 LB T 6,4 6,6 7,0 8,2 8,5 9,9 10,6 11,1 12,1 15,3 16,9 18,7App Wt
Kg 0,30 0,30 0,46 0,72 1,16 1,62 2,67 3,21 7,94 9,85 18,00 18,00
NOTE: Dimensions in mm
71
FORGED FITTINGS ¦ THREADEDASME B16.11 5.1
ELBOWS
B
C
T
C
45° ELBOWS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B 22,4 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 91,9 109,5 146,1C 17,5 17,5 19,1 22,4 25,4 28,4 33,3 35,1 42,9 52,3 63,5 79,2
2000 LB T 3,2 3,2 3,2 3,2 3,2 3,7 3,9 4,0 4,3 5,6 6,0 6,6App Wt
Kg 0,12 0,12 0,11 0,30 0,37 0,41 0,64 0,75 1,19 3,46 5,45 9,50
B 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 152,4C 17,5 19,1 22,4 25,4 28,4 33,3 35,1 42,9 43,7 52,3 63,5 79,2
3000 LB T 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,6 7,1 7,6 8,8 11,2App Wt
Kg 0,12 0,12 0,37 0,34 0,54 0,92 0,97 1,84 1,93 3,46 5,45 9,5
B 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 146,1 152,4C 19,1 22,4 25,4 28,4 33,3 35,1 42,9 43,7 52,3 63,5 79,2 79,2
6000 LB T 6,4 6,6 7,0 8,2 8,5 9,9 10,6 11,1 12,1 15,3 16,6 18,7App Wt
Kg 0,41 0,41 0,39 0,61 1,02 1,18 2,07 2,61 4,37 7,00 14,16 14,16
NOTE: Dimensions in mm
72
ASME B16.11FORGED FITTINGS ¦ SOCKET WELD5.1
ELBOWS
B
A
C
C
D
A
E
90° ELBOWS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 11,2 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1 57,2 66,5B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
3000 LB C 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,0 7,7 8,3 9,3D 6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 77,9 100,7E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
App Wt Kg 0,12 0,12 0,11 0,22 0,31 0,47 0,67 0,90 1,36 2,80 4,40 13,30
A 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
6000 LB C 3,4 4,0 4,4 5,2 6,0 6,9 6,9 7,8 9,5D 3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
App Wt Kg 0,3 0,3 0,3 0,40 0,62 1,02 1,32 2,37 2,72
NOTE: Dimensions in mm
73
FORGED FITTINGS ¦ SOCKET WELDASME B16.11 5.1
ELBOWS
B
C
C
A
E
D
45° ELBOWS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 7,9 7,9 7,9 11,2 12,7 14,2 17,5 20,6 25,4 28,4 31,8 41,1B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
3000 LB C 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,0 7,7 8,3 9,3D 6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 77,9 100,7E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
App Wt Kg 0,09 0,09 0,09 0,26 0,35 0,38 0,61 0,71 1,14 3,36 4,7 9,0
A 7,9 7,9 11,2 12,7 14,2 17,5 20,6 25,4 28,4B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
6000 LB C 3,4 4,0 4,4 5,2 6,0 7,0 6,9 7,8 9,50D 3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
App Wt Kg 0,25 0,25 0,25 0,31 0,52 0,92 1,02 1,92 2,28
NOTE: Dimensions in mm
74
ASME B16.11FORGED FITTINGS ¦ THREADED5.1
ELBOWS
T
C
B
MALE/FEMALE - 90° STREET ELBOWS
Rating Dims 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
B 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1C 24,6 28,4 33,3 38,1 44,5 50,8 60,5 63,5
3000 LB T 3,3 3,5 4,1 4,3 5,0 5,3 5,6 7,1App Wt
Kg 0,12 0,17 0,23 0,40 0,66 1,03 1,37 2,30
NOTE: Dimensions in mm
75
FORGED FITTINGS ¦ THREADEDASME B16.11 5.2
TEES
C
B
T
C
TEES
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B 22,4 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 91,9 109,5 146,1C 20,6 20,6 24,6 28,4 33,3 38,1 44,5 50,8 60,5 76,2 85,9 106,4
2000 LB T 3,2 3,2 3,2 3,2 3,2 3,7 3,9 4,0 4,3 5,6 6,0 6,6App Wt
Kg 0,17 0,17 0,16 0,32 0,43 0,61 0,96 1,25 1,93 4,11 6,13 17,20
B 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 152,4C 20,6 24,6 28,4 33,3 38,1 44,5 50,8 60,5 63,5 82,6 95,3 114,3
3000 LB T 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,6 7,1 7,6 8,8 11,2App Wt
Kg 0,2 0,2 0,38 0,56 0,84 1,36 1,65 3,1 3,18 8,80 9,50 17,2
B 25,4 33,3 38,1 46 55,6 62,0 75,4 84,1 101,6 120,7 146,1 152,4C 24,6 28,4 33,3 38,1 44,5 50,8 60,5 76,2 82,6 95,3 106,4 114,3
6000 LB T 6,4 6,6 7,0 8,2 8,5 9,9 10,6 12,1 12,1 15,3 16,6 18,7App Wt
Kg 0,42 0,42 0,63 0,98 1,65 2,19 3,32 4,42 8,50 13,10 24,00 24,00
NOTE: Dimensions in mm
76
ASME B16.11FORGED FITTINGS ¦ SOCKET WELD5.2
TEES
D
A
B
C
C
A A
E
TEES - EQUAL AND REDUCING
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 11,2 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1 57,2 66,5B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4
3000 LB C 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,05 7,7 8,3 9,3D 6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 93,5 100,7E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
App Wt Kg 0,12 0,12 0,10 0,21 0,31 0,47 0,67 0,90 1,36 2,80 4,40 13,30
A 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
6000 LB C 3,4 4,0 4,4 5,2 6,0 7,0 6,9 7,8 9,5D 3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
App Wt Kg 0,12 0,12 0,18 0,40 0,62 1,02 1,32 2,37 2,72
NOTE: Dimensions in mm
77
FORGED FITTINGS ¦ SOCKET WELDASME B16.11 5.3
REDUCERS
C D
D
TYPE 1
D
E D F
B
TYPE 3
A
CD
B
TYPE 2
A
C
REDUCING INSERTS (3000 LB)
NB C D A B E F Type
1/2" x 3/8" 47 17,5 10,9 23,9 25,9 11/2" x 1/4" 47 14,0 9,4 16,0 23/4" x 1/2" 26,9 21,6 12,4 25,4 32,0 13/4" x 3/8" 26,9 17,5 10,9 14,0 23/4" x 1/4" 26,9 14,0 9,4 16,0 22,1 31" x 3/4" 33,5 27,2 14,5 28,4 38,1 11" x 1/2" 33,5 21,6 12,4 20,6 21" x 3/8" 33,5 16,5 10,9 22,1 25,9 31" x 1/4" 33,5 14,0 9,4 23,9 22,1 3
1 1/4" x 1" 42,4 33,8 16,0 32,0 45,0 11 1/4" x 3/4" 42,4 27,2 14,5 20,6 21 1/4" x 1/2" 42,4 21,6 12,4 22,1 32,0 3
1 1/4" x 1 1/4" 42,4 42,5 17,5 33,0 56,9 11 1/4" x 1" 42,4 33,8 16,0 20,6 2
1 1/2" x 3/4" 48,4 27,2 14,5 22,1 38,1 31 1/2" x 1/2" 48,4 21,6 12,4 24,1 32,0 32" x 1 1/2" 60,6 48,8 19,1 20,6 22" x 1 1/4" 60,6 42,7 17,5 22,1 56,9 3
2" x 1" 60,6 33,8 16,0 24,1 45,0 32" x 3/4" 60,6 27,2 14,5 25,4 38,1 32" x 1/2" 60,6 21,6 12,4 26,9 32,0 3
NOTE: Dimensions in mm
78
ASME B16.11FORGED FITTINGS ¦ THREADED5.4
BUSHINGS
A
B
F
HEXAGON HEAD BUSH
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A - 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,83000 LB B - 3,0 4,1 4,8 5,6 6,4 7,1 7,9 8,6 9,7 10,4 12,7
+ F - 15,7 17,5 22,4 26,9 35,1 44,5 50,8 63,5 76,2 88,9 117,3
6000 LB App Wt Kg - 0,02 0,03 0,04 0,07 0,10 0,20 0,30 0,45 0,54 1,17 3,15
NOTE: Dimensions in mm
79
FORGED FITTINGS ¦ THREADEDASME B16.11 5.5
CAPS
B
T
A
CAPS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 15,7 19,1 22,4 28,4 35,1 44,5 57,2 63,5 76,2 91,9 108,0 139,7B 19,1 25,4 25,4 31,8 36,6 41,1 44,5 44,5 47,8 60,5 65,0 68,3
3000 LB T 4,8 4,8 4,8 6,4 6,4 9,7 9,7 11,2 12,7 15,7 19,1 22,4App Wt
Kg 0,04 0,04 0,05 0,10 0,18 0,33 0,60 0,70 1,06 1,84 1,65 4,57
A 22,4 25,4 31,8 38,1 44,5 57,2 63,5 76,2 91,9 108,0 127,0 158,8B 25,4 26,9 26,9 33,3 38,1 42,9 46,0 47,8 50,8 63,5 68,3 74,7
6000 LB T 6,4 6,4 6,4 7,9 7,9 11,2 11,2 12,7 15,7 19,1 22,4 28,4App Wt
Kg 0,06 0,06 0,09 0,14 0,20 0,34 0,60 1,77 1,47 2,10 2,50 6,30
NOTE: Dimensions in mm
80
ASME B16.11FORGED FITTINGS ¦ SOCKET WELD5.5
CAPS
E
H
B C
CAPS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4C 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,00 7,7 8,3 9,3
3000 LB E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1H 4,8 4,8 4,8 6,4 6,4 9,7 9,7 11,2 12,7 15,7 19,1 22,4
App Wt Kg 0,01 0,04 0,05 0,10 0,16 0,22 0,41 0,51 0,85 1,25 1,95 3,36
B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1C 3,4 4,0 4,4 5,2 6,0 6,9 6,9 7,8 10,4
6000 LB E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7H 6,4 6,4 6,4 7,9 7,9 11,2 11,2 12,7 15,7
App Wt Kg 0,15 0,15 0,15 0,19 0,27 0,53 0,64 0,97 1,64
NOTE: Dimensions in mm
81
FORGED FITTINGS ¦ THREADEDASME B16.11 5.6
CROSSES
B
C
CROSSES
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B 22,4 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 91,9 109,5 146,1C 17,5 17,5 19,1 22,4 25,4 28,4 33,3 35,1 42,9 52,3 63,5 79,2
2000 LB T 3,2 3,2 3,2 3,2 3,2 3,7 3,9 4,0 4,3 5,6 6,0 6,6App Wt
Kg 0,21 0,21 0,18 0,37 0,48 0,75 1,07 1,49 2,27 5,30 8,20 19,00
B 22,4 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 152,4C 17,5 19,1 22,4 25,4 28,4 33,3 35,1 42,9 43,7 52,3 63,5 79,2
3000 LB T 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,6 7,1 7,6 8,8 11,2App Wt
Kg 0,21 0,21 0,43 0,66 1,05 1,69 1,99 3,69 3,77 9,50 13,00 19,00
B 25,4 33,3 38,1 46,0 55,6 62,0 75,4 84,1 101,6 120,7 146,1 152,4C 19,1 22,4 25,4 28,4 33,3 35,1 42,9 43,7 52,3 63,5 79,2 79,2
6000 LB T 6,4 6,6 7,0 8,2 8,5 9,9 10,6 11,1 12,1 15,3 16,6 18,7App Wt
Kg 0,51 0,51 0,70 1,17 1,91 2,56 4,35 5,17 12,00 16,50 28,00 -
NOTE: Dimensions in mm
82
ASME B16.11FORGED FITTINGS ¦ SOCKET WELD5.6
CROSSES
B
A
C
E
CROSSES
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 11,2 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1 57,2 66,5B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 68,7 89,8 115,4
3000 LB C 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,0 7,7 8,3 9,3D 6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 77,9 100,6E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
App Wt Kg 0,18 0,18 0,15 0,36 0,45 0,76 1,09 1,45 2,35 4,5 7,8 21,5
A 11,2 13,5 15,7 19,1 22,4 26,9 31,8 38,1 41,1B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1
6000 LB C 3,4 4,0 4,4 5,2 6,0 7,0 6,9 7,8 9,50D 3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
App Wt Kg 0,62 0,62 0,62 0,63 1,04 1,71 2,11 3,95 4,22
NOTE: Dimensions in mm
83
FORGED FITTINGS ¦ THREADEDASME B16.11 5.7
COUPLINGS AND HALF COUPLINGS
B
A
B
A
B
A
COUPLINGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 15,7 19,1 22,4 28,4 35,1 44,5 57,2 63,5 76,2 91,9 108,0 139,73000 LB B 31,8 35,1 38,1 47,8 50,8 60,5 66,5 79,2 85,9 91,9 108,0 120,7
App Wt Kg 0,04 0,04 0,06 0,13 0,19 0,39 0,68 0,99 1,37 2,07 3,08 5,44
A 22,4 25,4 31,8 38,1 44,5 57,2 63,5 76,2 91,9 108,0 127,0 158,86000 LB B 31,8 35,1 38,1 47,8 50,8 60,5 66,5 79,2 85,9 91,9 108,0 120,7
App Wt Kg 0,06 0,06 0,18 0,31 0,41 0,85 1,05 1,81 3,40 4,19 6,10 10,03
NOTE: Dimensions in mm
HALF COUPLINGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 15,7 19,1 22,4 28,4 35,1 44,5 57,2 63,5 76,2 91,9 108 139,73000 LB B 16,0 17,5 19,1 23,9 25,4 30,2 33,3 39,6 42,9 46,0 54,1 60,5
App Wt Kg 0,02 0,02 0,03 0,06 0,09 0,2 0,34 0,50 0,69 1,04 1,54 2,73
A 22,4 25,4 31,8 38,1 44,5 57,2 63,5 76,2 91,9 108,0 127,0 158,86000 LB B 16,0 17,5 44,5 23,9 25,4 30,2 33,3 39,6 42,9 46,0 54,1 60,5
App Wt Kg 0,03 0,03 0,09 1,16 0,21 0,43 0,53 1,91 1,70 2,10 3,05 5,03
NOTE: Dimensions in mm
84
ASME B16.11FORGED FITTINGS ¦ SOCKET WELD5.7
COUPLINGS AND HALF COUPLINGS
E
A
B
COUPLING HALF COUPLING
CD
E
F
B CD
COUPLINGS AND HALF COUPLINGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 6,4 6,4 6,4 9,7 9,7 12,7 12,7 12,7 19,1 19,1 19,1 19,1B 10,7 14,1 17,5 21,8 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4C 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 5,80 7,7 8,3 9,3
3000 LB D 6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,0 61,2 77,9 100,7E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1
15,7 15,7 17,5 22,4 24,4 28,4 30,2 31,8 41,1 42,9 44,5 47,8App Wt
Kg 0,05 0,05 0,06 0,13 0,18 0,26 0,48 0,57 0,92 1,4 1,8 3,23
A 6,4 6,4 6,4 9,7 9,7 12,7 12,7 12,7 19,1B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1C 3,4 4,0 4,4 17,9 6,0 7,1 6,9 7,8 9,50
6000 LB D 3,2 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7
15,7 15,7 17,5 22,4 23,9 28,4 30,2 31,8 41,1App Wt
Kg 0,1 0,1 0,18 0,23 0,32 0,64 0,72 1,17 2,08
NOTE: Dimensions in mm
85
FORGED FITTINGS ¦ THREADEDASME B16.11 5.8
PLUGS
B
A
C
D
A
E
A
H
E
SQUARE HEAD PLUGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
3000 LB A 9,7 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8+ B 6,4 6,4 7,9 9,7 11,2 12,7 14,2 15,7 17,5 19,1 20,6 25,4
6000 LB C 7,1 9,7 11,2 14,2 15,7 20,6 23,9 28,4 33,3 38,1 42,9 63,5App Wt
Kg 0,01 0,01 0,03 0,05 0,08 0,16 0,27 0,38 0,63 0,95 1,54 3,85
NOTE: Dimensions in mm
ROUND HEAD PLUGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
3000 LB A 9,7 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8+ D 35,1 41,1 41,1 44,5 44,5 50,8 50,8 50,8 63,5 69,9 69,9 76,2
6000 LB E 10,4 13,5 17,5 21,3 26,9 33,3 42,9 48,5 60,5 73,2 88,9 114,3App Wt
Kg 0,03 0,04 0,07 0,12 0,19 0,34 0,55 0,72 1,41 2,20 3,26 6,00
NOTE: Dimensions in mm
HEXAGON HEAD PLUGS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
3000 LB A 9,7 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8+ H 6,4 6,4 7,9 7,9 9,7 9,7 14,2 15,7 17,5 19,1 20,6 25,4
6000 LB F 11,2 15,7 17,5 22,4 26,9 35,1 44,5 50,8 63,5 76,2 88,9 117,3App Wt
Kg 0,02 0,26 0,05 0,07 0,18 0,25 0,45 0,60 1,16 1,75 2,50 6,00
NOTE: Dimensions in mm
86
BS 3799/ASME B16.11FORGED FITTINGS ¦ THREADED5.9
PIPE NIPPLES
L
C CB
H - AT FLATSS
D
L
PIPE NIPPLES
1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
Length 'L' 100 mm is our standard, but any length will be provided on requestPipe wall Available in any Standard Schedule, e.g. Sch 80 - 3000 lb, Sch XXS - 6000 lbEnd types Threaded, bevelled or plain
HEXAGON NIPPLES - EQUAL AND REDUCING
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
B 6,1 6,1 7,9 7,9 9,9 9,9 12,4 16,0 17,0 19,1 20,6 25,4ASME B16.11 C 9,7 11,2 12,7 14,2 15,7 19,1 20,6 20,6 22,4 26,9 28,4 31,8BS3799 (min) C 9,9 15,0 16,0 20,1 21,1 24,9 - 25,9 26,9 40,9 41,9 45,0
3000 LB D 4,8 7,9 10,9 14,0 19,1 23,9 32,5 38,0 49,0 59,0 73,8 97,26000 LB D 2,0 6,1 7,9 10,9 13,0 17,0 22,9 30,0 39,1 45,0 58,4 80,0
H 11,0 15,0 18,0 22,1 26,9 35,1 46,0 50,0 62,0 75,9 94,0 118,1App
Wt Kg 0,02 0,02 0,03 0,05 0,09 0,16 0,34 0,33 0,72 1,10 1,30 2,40
NOTE: Dimensions in mm
CLOSE TAPER NIPPLES
1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
Standard ‘L’ Length 19,1 25,4 28,6 31,8 38,1 44,5 50,8 50,8 50,8 60,3 76,2 88,9
NOTE: Available in and Standard Production Schedule Wall Thickness, e.g. Sch 40, 80, 160, XXS
87
FORGED FITTINGS ¦ THREADEDBS 3799 5.10
UNIONS
D
A
C
A
D
C
UNIONS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 39,9 42,9 48,0 50,8 56,9 64,0 70,1 79,0 88,9 118,1 120,9 -B 32,0 32,0 36,1 42,9 50,0 59,9 70,1 78,0 95,0 125,0 140,0 -
3000 LB C 16,0 18,0 19,1 21,1 23,9 24,9 29,0 30,0 37,1 48,0 50,8 -D 17,0 19,1 22,1 30,0 36,1 40,9 50,0 59,9 70,1 85,1 100,1 -
App Wt Kg 0,14 0,14 0,20 0,35 0,43 0,65 0,98 1,26 2,00 4,50 7,00 -
A 44,5 44,5 50,8 60,5 57,2 57,2 76,2 88,9 108,0 108,0 127,0 -B 39,6 39,6 42,9 53,8 58,4 73,2 79,2 88,9 120,7 152,4 190,5 -
6000 LB C 22,4 22,4 26,9 26,9 26,9 34,8 34,8 34,8 47,8 53,8 50,8 -D 23,9 23,9 31,8 36,6 44,5 55,6 63,5 76,2 88,9 108 127 -
App Wt Kg 0,2 0,2 0,4 0,60 0,8 0,9 1,35 2,5 5,00 7,00 12,00 -
NOTE: Dimensions in mm
UNISONS - MALE X FEMALE, THREADED X THREADED, SOCKET WELD X TREADED
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
A 1,95 2,13 2,39 2,56 2,86 3,27 3,57 3,92 4,38B 1,26 1,26 1,42 1,69 1,97 2,36 2,76 3,07 3,74
3000 LB C 0,63 0,71 0,75 0,83 0,94 1,0 1,14 1,18 1,5D 0,67 0,75 0,87 1,2 1,42 1,61 1,97 2,36 2,8
App Wt Kg 0,16 0,16 0,22 0,38 0,45 0,7 1,00 1,35 2,20
NOTE: Dimensions in mm
88
BS 3799FORGED FITTINGS ̄SOCKET WELD5.10
UNIONS
A
BDF
C
A
E
UNIONS
Rating Dims 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
A 37,1 37,1 37,1 38,1 46,0 52,1 54,1 55,9 68,1 88,9 96,0 158,8B 10,7 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4C 3,2 3,3 3,5 4,1 4,3 5,0 5,3 5,5 6,0 7,7 8,3 9,3
3000 LB D 6,1 8,5 11,8 15,0 20,2 25,9 34,3 40,1 51,7 61,2 77,9 100,7E 9,7 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 19,1F 32,0 32,0 36,1 42,9 50,0 59,9 70,1 78,0 95,0 125,0 140,0 190,5
App Wt Kg 0,14 0,2 0,2 0,35 0,43 0,65 0,98 1,26 2,0 4,5 7,0 12,0
A - 44,5 50,8 60,5 57,2 57,2 76,2 88,9 108,0 108,0 127,0 158,8B - 14,1 17,5 21,7 27,1 33,8 42,5 48,6 61,1 73,8 89,8 115,4C - 4,0 4,4 5,2 6,0 7,0 6,9 7,8 9,50 10,4 12,1 18,5
6000 LB D - 5,6 8,4 11,0 14,8 19,9 28,7 33,2 42,1 54,0 66,7 87,3E - 9,7 9,7 9,7 12,7 12,7 12,7 12,7 15,7 15,7 15,7 35,1F - 39,6 42,9 53,8 58,4 73,2 79,2 88,9 114,3 152,4 190,5 190,5
App Wt Kg - 0,2 0,4 0,60 0,8 0,9 1,35 2,5 5,0 7,0 12,0 14,0
NOTE: Dimensions in mm
89
FORGED FITTINGS ¦ THREADEDBS 3799/ASME B16.11 5.11
SWAGE NIPPLES
L
SWAGED NIPPLES CONCENTRIC AND ECCENTRIC, THREADED/PLAIN/BEVELLED
Large end dimensions 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
Standard Length 'L' 63,5 69,9 69,9 76,2 88,9 101,6 114,3 165,1 177,8 203,2 228,6BS 3799 76,2 88,9 95,3 101,6 - 114,3 165,1 177,8 203,2 228,6
NOTE: Dimensions in mm
90
BS 3799/ASME B16.11FORGED FITTINGS5.12
BOSSES
A
45°
B
A
E
45°
BD
WELDING BOSS - THREADED
Rating Dims 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
3000 LB A 41,4 44,5 50,8 50,8 50,8 50,8 50,8 50,8+ B 31,8 35,1 38,1 44,5 57,2 63,5 75,9 91,9
6000 LB App Wt Kg 0,24 0,30 0,37 0,50 0,80 0,90 1,29 1,78
NOTE: Dimensions in mm
WELDING BOSS - SOCKET WELD
Rating Dims 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
3000 LB A 41,4 44,5 50,8 50,8 50,8 50,8 50,8 50,8+ B 31,8 35,1 38,1 44,5 57,2 63,5 75,9 91,9
6000 LB C THROUGH BORE, Sch 40 - 3000 lb, Sch 160 - 6000 lbD 14,0 17,5 21,7 27,1 33,8 42,6 48,7 61,1E 9,5 11,0 12,7 14,5 16,0 17,5 19,1 22,1
App Wt Kg 0,23 0,29 0,38 0,53 0,83 0,92 1,31 1,86
NOTE: Dimensions in mm
91
FORGED FITTINGS ¦ THREADSASME B1.20.1 5.13
TAPER PIPE THREADS, NPT
L2
L1
E1E0
Conicityover 1/16 Ø
90°
30° 30°
P
D
Conicityover 1/16 Ø
L1L2
E0
E1
Nom-inal size of
tube
Outside diameter
of the tube
Num-ber of
threads per inch
Pitch Diameter of the pitch of the bolt at the outside
end of the thread
The pitch of the bolt at the inside end of
the thread
Efficientlength of the
thread
Length of the hand packing
Increase of the diameter per
rotation
D P Eo E1 L2 L1
mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch
1/8 10,29 0,405 27 0,94 0,03704 9,233 0,36351 9,489 0,3736 6,703 0,2639 4,102 0,1615 0,0586 0,00231
1/4 13,72 0,54 18 1,411 0,05556 12,126 0,47739 12,487 0,49163 10,205 0,4018 5,786 0,2278 0,0881 0,00347
3/8 17,14 0,675 18 1,411 0,05556 15,545 0,61201 15,929 0,62701 10,358 0,4078 6,096 0,24 0,0881 0,00347
1/2 21,34 0,84 14 1,814 0,07143 19,264 0,75843 19,772 0,77843 13,556 0,5337 8,128 0,32 0,1132 0,00446
3/4 26,67 1,05 14 1,814 0,07143 24,579 0,96768 25,117 0,98887 13,86 0,5457 8,61 0,339 0,1132 0,00446
1 33,4 1,315 11 1/2 2,209 0,08696 30,826 1,21363 31,461 1,23863 17,343 0,6828 10,16 0,4 0,1379 0,00543
1 1/4 42,16 1,66 11 1/2 2,209 0,08696 39,551 1,55713 40,218 1,58338 17,952 0,7068 10,668 0,42 0,1379 0,00543
1 1/2 48,26 1,9 11 1/2 2,209 0,08696 45,621 1,79609 46,287 1,82234 18,377 0,7235 10,668 0,42 0,1379 0,00543
2 60,32 2,375 11 1/2 2,209 0,08696 57,633 2,26902 58,325 2,29627 19,215 0,7565 11,074 0,436 0,1379 0,00543
2 1/2 73,02 2,875 8 3,175 0,125 69,076 2,71953 70,159 2,76216 28,892 1,1375 17,322 0,682 0,1983 0,00781
3 88,9 3,5 8 3,175 0,125 84,852 3,34062 86,068 3,3885 30,48 1,2 19,456 0,766 0,1983 0,00781
3 1/2 101,6 4 8 3,175 0,125 97,472 3,8375 98,776 3,88881 31,75 1,25 20,853 0,821 0,1983 0,00781
4 114,3 4,5 8 3,175 0,125 110,093 4,33438 111,433 4,38712 33,02 1,3 21,437 0,844 0,1983 0,00781
NOTE: All sizes in the table correspond to the ASME B1.20.1 and API 5 L standards, excepr for the nominal sizes 1/8” and 1/4” for which E1 and L1 are not measured on the same plane according to API 5L. However, these sizes are the same when brought on the same plane.
92
WEIGHT OF FITTINGS
3000 lbs SCREWED FITTINGS
TYPE APPROXIMATE WEIGHTS IN Kg
SIZE INCHES 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
SIZE METRIC 6 8 10 15 20 25 32 40 50
Round Nipples 0,023 0,04 0,055 0,1 0,2 0,242 - 0,405 0,56
Hexagon Nipples 0,032 0,04 0,072 0,1 0,16 0,24 0,38 0,455 0,55
#Hexagon Reducing Nipples - 0,038 0,055 0,09 0,142 0,205 0,35 0,405 0,51
End Caps 0,026 0,04 0,06 0,106 0,14 0,34 0,454 0,7 1,3
Unions 0,16 0,16 0,21 0,325 0,5 0,9 1,12 1,45 2,19
90° Elbows 0,16 0,135 0,27 0,41 0,61 1,0 1,25 1,6 2,55
45° Elbows 0,12 0,11 0,23 0,34 0,555 0,85 1,0 1,4 2,1
Tees 0,255 0,225 0,325 0,6 0,8 1,41 1,4 2,27 3,05
*Reducing Tees - 0,25 0,4 0,7 0,98 1,73 2,01 2,605 3,4
Welding Bosses - 0,053 0,085 0,15 0,22 0,316 0,705 0,998 1,44
Couplings 0,035 0,05 0,08 0,15 0,22 0,31 0,71 1,05 1,5
Reducing Couplings - 0,07 0,105 0,185 0,285 0,396 0,872 1,4 1,71
Half Couplings 0,02 0,024 0,035 0,075 0,15 0,2 0,335 0,5 0,71
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
SCREWED FITTINGS
TYPE APPROXIMATE WEIGHTS IN Kg
SIZE INCHES 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
SIZE METRIC 6 8 10 15 20 25 32 40 50
*Hexagon Bushes - 0,025 0,035 0,054 0,08 0,18 0,19 0,23 0,455
Square Head Plugs 0,009 0,016 0,029 0,057 0,095 0,172 0,255 0,4 0,58
Hexagon Head Plugs 0,029 0,029 0,057 0,085 0,142 0,227 0,51 0,624 1,021
Round Head Plugs 0,057 0,057 0,085 0,113 0,17 0,34 0,51 0,709 1,361
NOTE: * Weights of the largest reduction, i.e. the heaviest
NOTE: All weights in this section are based on approxemate weights for steel. Titanium weights can be calculated as 57% of the table values.
ASME B16.11FORGED FITTINGS5.14
93
FORGED FITTINGSASME B16.11 5.14
WEIGHT OF FITTINGS
3000 lbs SOCKET-WELD FITTINGS
TYPE APPROXIMATE WEIGHTS IN Kg
SIZE INCHES 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
SIZE METRIC 6 8 10 15 20 25 32 40 50
Couplings 0,039 0,05 0,06 0,115 0,18 0,25 0,4 0,48 0,8
#Reducing Couplings - 0,066 0,071 0,132 0,22 0,325 0,44 0,575 1,3
Half Couplings 0,04 0,054 0,085 0,135 0,17 0,32 0,485 0,6 1,02
Tees 0,265 0,21 0,255 0,31 0,325 0,6 0,85 1,29 1,9
*Reducing Tees - 0,289 0,323 0,415 0,448 0,81 1,32 1,675 2,55
Welding Bosses - 0,072 0,085 0,135 0,205 0,3 0,41 0,56 1,225
End Caps 0,02 0,035 0,058 0,085 0,13 0,21 0,3 0,475 0,73
90° Elbows 0,155 0,13 0,13 0,225 0,29 0,5 0,75 1,1 1,7
45° Elbows 0,072 0,06 0,085 0,18 0,222 0,36 0,555 0,85 1,2
Unions 0,157 0,157 0,188 0,28 0,45 0,775 1,2 1,4 2,25
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
6000 LBS SOCKET-WELD FITTINGS
TYPE APPROXIMATE WEIGHTS IN Kg
SIZE INCHES 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
SIZE METRIC 6 8 10 15 20 25 32 40 50
Couplings - 0,085 0,13 0,205 0,275 0,48 0,68 1,05 1,95
#Reducing Couplings - 0,1 0,148 0,272 0,355 0,5 0,75 1,275 2,2
Half Couplings - 0,094 0,15 0,25 0,34 0,65 0,751 1 2,1
Tees - - - 0,675 1,2 1,58 1,8 3,005 3,6
*Reducing Tees - - - 0,805 1,359 1,85 2,3 3,68 4,15
Welding Bosses - 0,09 0,135 0,2 0,27 0,4 0,6 1 1,78
End Caps - 0,105 0,175 0,188 0,23 0,41 0,63 0,8 1,4
90° Elbows - - - 0,4 0,628 1 1,4 2,35 3
45° Elbows - - - 0,369 0,58 0,905 1,125 2,125 2,6
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
94
BUTT˝WELD FITTINGS ASME B16.9/ MSS SP˝757.2
WEIGHT OF FITTINGS
SWAGE NIPPLES - BS3799
TYPE APPROXIMATE WEIGHTS IN Kg
SIZE INCHES 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
SIZE METRIC 6 8 10 15 20 25 32 40 50
Screwed/Plain 3000 lbs 0,04 0,054 0,085 0,135 0,17 0,32 0,485 0,60 0,925
Plain 6000 lbs 0,105 0,13 0,18 0,225 0,29 0,55 0,8 1,1 1,4
Screwed 6000 lbs 0,17 0,215 0,285 0,325 0,501 0,75 0,951 1,6 2,1
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
6000 LBS SCREWED FITTINGS - ASME B16.11
TYPE APPROXIMATE WEIGHTS IN Kg
SIZE INCHES 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
SIZE METRIC 6 8 10 15 20 25 32 40 50
Round Nipples - - - 0,191 0,272 0,43 - 0,716 1,008
Hexagon Nipples 0,045 0,06 0,08 0,12 0,195 0,3 0,48 0,493 0,61
#Hexagon Reducing Nipples 0,04 0,055 0,07 0,085 0,138 0,275 0,39 0,3 0,504
Couplings 0,08 0,085 0,105 0,2 0,45 0,945 1 1,85 3,4
Reducing Couplings 0,088 0,105 0,126 0,245 0,509 1,35 1,455 2,222 3,955
Half Couplings 0,06 0,065 0,08 0,115 0,225 0,454 0,525 0,95 1,6
End Caps 0,06 0,065 0,085 0,145 0,2 0,335 0,585 0,75 1,45
90° Elbows 0,285 0,275 0,475 0,7 1,6 3,05 3,4 6 9,4
45° Elbows 0,265 0,245 0,225 0,625 0,95 1,12 2,125 2,6 4,3
Tees 0,48 0,425 0,6 0,9 1,65 2,1 3,5 4,4 8,5
*Reducing Tees - 0,6 0,78 1,2 2 2,34 4,05 4,94 10,4
Welding Bosses - 0,085 0,115 0,21 0,46 0,9 1,1 1,85 3,25
NOTE: # Weights of the smallest reduction, i.e. the heaviest * Weights of the largest reduction, i.e. the heaviest
FORGED FITTINGS5.14
95
BUTT-WELD FITTINGSASME B16.9/ MSS SP-75 7.2
96
97
Content
6.1 Class 150 98
6.2 Class 300 100
6.3 Class 400 102
6.4 Class 600 104
6.5 Class 900 106
6.6 Class 1500 108
6.7 Class 2500 110
6.8 Dimensional Tolerances 112
6.9 Orifi e Weld Neck RF Flanges 113
6.10 Orifi e Weld Neck RTJ Flanges 120
6.11 Orifi e Flanges 127
6.12 Weight 128
6FLANGES ASME B16.5
98
ASME B16.5FLANGES6.1
CLASS 150 FLANGES
DIMENSIONS OF CLASS 150 FLANGES
Flange dimensions
HUB dimensions Length Through HUB Threaded
flang SW Bore
Nom-inal Pipe Size
OD flang
Thickn.Large end
Small end
Thr. Slip. Sw.
LappedWeld neck
Counter bore
Thread length
Socket depth
Slip-On, SW
LappedWeld neck
NPS O C min. X A Y Y Y Q min. T min. D B min. B min. B
1/2 88,9 11,2 30,2 21,3 15,7 15,7 47,8 15,7 9,7 22,4 22,9 15,7
3/4 98,6 12,7 38,1 26,7 15,7 15,7 52,3 15,7 11,2 27,7 28,2 20,8
1 108,0 14,2 49,3 33,5 17,5 17,5 55,6 17,5 12,7 34,5 35,1 26,7
1 1/4 117,3 15,7 58,7 42,2 20,6 20,6 57,2 20,6 14,2 43,2 43,7 35,1
1 1/2 127,0 17,5 65,0 48,3 22,4 22,4 62,0 22,4 15,7 49,5 50,0 40,9
2 152,4 19,1 77,7 60,5 25,4 25,4 63,5 25,4 17,5 62,0 62,5 52,6
2 1/2 177,8 22,4 90,4 73,2 28,4 28,4 69,9 28,4 19,1 74,7 75,4 62,7
3 190,5 23,9 108,0 88,9 30,2 30,2 69,9 30,2 20,6 90,7 91,4 78,0
3 1/2 215,9 23,9 122,2 101,6 31,8 31,8 71,4 31,8 103,4 104,1 90,2
4 228,6 23,9 134,9 114,3 33,3 33,3 76,2 33,3 116,1 116,8 102,4
5 254,0 23,9 163,6 141,2 36,6 36,6 88,9 36,6 143,8 144,5 128,3
6 279,4 25,4 192,0 168,4 39,6 39,6 88,9 39,6 170,7 171,5 154,2
8 342,9 28,4 246,1 219,2 44,5 44,5 101,6 44,5 221,5 222,3 202,7
10 406,4 30,2 304,8 273,1 49,3 49,3 101,6 49,3 276,4 277,4 254,5
12 482,6 31,8 365,3 323,9 55,6 55,6 114,3 55,6 327,2 328,2 304,8
14 533,4 35,1 400,1 355,6 57,2 79,2 127,0 57,2 359,2 360,2 To be
16 596,9 36,6 457,2 406,4 63,5 87,4 127,0 63,5 410,5 411,2 specifie
18 635,0 39,6 505,0 457,2 68,3 96,8 139,7 68,3 461,8 462,3 by
20 698,5 42,9 558,8 508,0 73,2 103,1 144,5 73,2 513,1 514,4 purchaser
24 812,8 47,8 663,4 609,6 82,6 111,3 152,4 82,6 616,0 616,0
NOTE: All dimensions except NPS and bolt diameter are in millimeters. The dimensions B2 for SW flange equals B or Weld Neck.
YC
X
O
THREADED
T YC
XB
O
SLIP˜ON WELDING
Y
C
X
A
O
WELDING NECK
C
O
BLIND
C
XB
O
LAPPED
YC
XB
O
SOCKET WELDING
B2
D
Y
B
99
FLANGESASME B16.5 6.1
CLASS 150 FLANGES
DIMENSIONS OF CLASS 150 FLANGES
RF dimensions RTJ dimensions Bolt hole drilling Stud bolt
length
Nom-inal Pipe Size
OD Height OD HeightGroove numb.
Groove Pitch
Groove Depth
Groove Width
Bolt Circle
Bolt hole
No of bolts
Bolt diam.
1.6 mm RF
Ring Joint
NPS R K E P E F Bc Bh L L
1/2 35,1 1,6 60,5 15,7 4 1/2 57,2
3/4 42,9 1,6 69,9 15,7 4 1/2 63,5
1 50,8 1,6 63,5 6,35 R15 47,63 6,35 8,74 79,2 15,7 4 1/2 63,5 76,2
1 1/4 63,5 1,6 73,2 6,35 R17 57,15 6,35 8,74 88,9 15,7 4 1/2 69,9 82,6
1 1/2 73,2 1,6 82,6 6,35 R19 65,07 6,35 8,74 98,6 15,7 4 1/2 69,9 82,6
2 91,9 1,6 101,6 6,35 R22 82,55 6,35 8,74 120,7 19,1 4 5/8 82,6 95,3
2 1/2 104,6 1,6 120,7 6,35 R25 101,60 6,35 8,74 139,7 19,1 4 5/8 88,9 101,6
3 127,0 1,6 133,4 6,35 R29 114,30 6,35 8,74 152,4 19,1 4 5/8 88,9 101,6
3 1/2 139,7 1,6 153,9 6,35 R33 131,78 6,35 8,74 177,8 19,1 8 5/8 88,9 101,6
4 157,2 1,6 171,5 6,35 R36 149,23 6,35 8,74 190,5 19,1 8 5/8 88,9 101,6
5 185,7 1,6 193,5 6,35 R40 171,45 6,35 8,74 215,9 22,4 8 3/4 95,3 108,0
6 215,9 1,6 218,9 6,35 R43 193,68 6,35 8,74 241,3 22,4 8 3/4 101,6 114,3
8 269,7 1,6 273,1 6,35 R48 247,65 6,35 8,74 298,5 22,4 8 3/4 108,0 120,7
10 323,9 1,6 330,2 6,35 R52 304,80 6,35 8,74 362,0 25,4 12 7/8 114,3 127,0
12 381,0 1,6 406,4 6,35 R56 381,00 6,35 8,74 431,8 25,4 12 7/8 120,7 133,4
14 412,8 1,6 425,5 6,35 R59 396,88 6,35 8,74 476,3 28,4 12 1 133,4 146,1
16 469,9 1,6 482,6 6,35 R64 454,03 6,35 8,74 539,8 28,4 16 1 133,4 146,1
18 533,4 1,6 546,1 6,35 R68 51753 6,35 8,74 577,9 31,8 16 1 1/8 146,1 158,8
20 584,2 1,6 596,9 6,35 R72 558,80 6,35 8,74 635,0 31,8 20 1 1/8 158,8 171,5
24 692,2 1,6 711,2 6,35 R76 673,10 6,35 8,74 749,3 35,1 20 1 1/4 171,5 184,2
NOTE: All dimensions except NPS and bolt diameter are in millimeters. The dimensions B2 for SW flange equals B or Weld Neck.1) the tolerance for E is only applicable for groove depth
E [Note (1)]P
E [Note (1)]
K min.
RBc
F23 deg.
R
O
L
STUD BOLT WITH NUTS
100
ASME B16.5FLANGES6.2
CLASS 300 FLANGES
DIMENSIONS OF CLASS 300 FLANGES
Flange dimensions
HUB dimensions Length Through HUB Threaded
flang SW Bore
Nom-inal Pipe Size
OD flang
Thickn.Large end
Small end
Thr. Slip. Sw.
LappedWeld neck
Counter bore
Thread length
Socket depth
Slip-On, SW
LappedWeld neck
NPS O C min. X A Y Y Y Q min. T min. D B min. B min. B
1/2 95,3 14,2 38,1 21,3 22,4 22,4 52,3 23,6 15,7 9,7 22,4 22,9 15,7
3/4 117,3 15,7 47,8 26,7 25,4 25,4 57,2 29,0 15,7 11,2 27,7 28,2 20,8
1 124,0 17,5 53,8 33,5 26,9 26,9 62,0 35,8 17,5 12,7 34,5 35,1 26,7
1 1/4 133,4 19,1 63,5 42,2 26,9 26,9 65,0 44,5 20,6 14,2 43,2 43,7 35,1
1 1/2 155,4 20,6 69,9 48,3 30,2 30,2 68,3 50,5 22,4 15,7 49,5 50,0 40,9
2 165,1 22,4 84,1 60,5 33,3 33,3 69,9 63,5 28,4 17,5 62,0 62,5 52,6
2 1/2 190,5 25,4 100,1 73,2 38,1 38,1 76,2 76,2 31,8 19,1 74,7 75,4 62,7
3 209,6 28,4 117,3 88,9 42,9 42,9 79,2 92,2 31,8 20,6 90,7 91,4 78,0
3 1/2 228,6 30,2 133,4 101,6 44,5 44,5 81,0 104,9 36,6 103,4 104,1 90,2
4 254,0 31,8 146,1 114,3 47,8 47,8 85,9 117,6 36,6 116,1 116,8 102,4
5 279,4 35,1 177,8 141,2 50,8 50,8 98,6 144,5 42,9 143,8 144,5 128,3
6 317,5 36,6 206,2 168,4 52,3 52,3 98,6 171,5 46,0 170,7 171,5 154,2
8 381,0 41,1 260,4 219,2 62,0 62,0 111,3 222,3 50,8 221,5 222,3 202,7
10 444,5 47,8 320,5 273,1 66,5 95,3 117,3 276,4 55,6 276,4 277,4 254,5
12 520,7 50,8 374,7 323,9 73,2 101,6 130,0 328,7 60,5 327,2 328,2 304,8
14 584,2 53,8 425,5 355,6 76,2 111,3 142,7 360,4 63,5 359,2 360,2 To be
16 647,7 57,2 482,6 406,4 82,6 120,7 146,1 411,2 68,3 410,5 411,2 specifie
18 711,2 60,5 533,4 457,2 88,9 130,0 158,8 462,0 69,9 461,8 462,3 by
20 774,7 63,5 587,2 508,0 95,3 139,7 162,1 512,8 73,2 513,1 514,4 purchaser
24 914,4 69,9 701,5 609,6 106,4 152,4 168,1 614,4 82,6 616,0 616,0
NOTE: All dimensions except NPS and bolt diameter are in millimeters. The dimensions B2 for SW flange equals B or Weld Neck.
YC
XQ
O
THREADED
T YC
XB
O
SLIP˜ON WELDING
Y
C
X
A
O
WELDING NECK
C
O
BLIND
C
XB
O
LAPPED
YC
XB
O
SOCKET WELDING
B2
D
Y
B
101
FLANGESASME B16.5 6.2
CLASS 300 FLANGES
DIMENSIONS OF CLASS 300 FLANGES
RF dimensions RTJ dimensions Bolt hole drilling Stud bolt
length
Nom-inal Pipe Size
OD Height OD HeightGroove numb.
Groove Pitch
Groove Depth
Groove Width
Bolt Circle
Bolt hole
No of bolts
Bolt diam.
1.6 mm RF
Ring Joint
NPS R K E P E F Bc Bh L L
1/2 35,1 1,6 50,8 5,56 R11 34,14 5,56 7,14 66,5 15,7 4 1/2 63,5 76,2
3/4 42,9 1,6 63,5 6,35 R13 42,88 6,35 8,74 82,6 19,1 4 5/8 76,2 88,9
1 50,8 1,6 69,9 6,35 R16 50,80 6,35 8,74 88,9 19,1 4 5/8 76,2 88,9
1 1/4 63,5 1,6 79,2 6,35 R18 60,33 6,35 8,74 98,6 19,1 4 5/8 82,6 95,3
1 1/2 73,2 1,6 90,4 6,35 R20 68,28 6,35 8,74 114,3 22,4 4 3/4 88,9 101,6
2 91,9 1,6 108,0 7,92 R23 82,55 7,92 11,91 127,0 19,1 8 5/8 88,9 101,6
2 1/2 104,6 1,6 127,0 7,92 R26 101,60 7,92 11,91 14,4 22,4 8 3/4 101,6 114,3
3 127,0 1,6 146,1 7,92 R31 12,83 7,92 11,91 168,1 22,4 8 3/4 108,0 120,7
3 1/2 139,7 1,6 158,8 7,92 R34 131,78 7,92 11,91 184,2 22,4 8 3/4 108,0 127,0
4 157,2 1,6 174,8 7,92 R37 149,23 7,92 11,91 200,2 22,4 8 3/4 114,3 127,0
5 185,7 1,6 209,6 7,92 R41 180,98 7,92 11,91 235,0 22,4 8 3/4 120,7 133,4
6 215,9 1,6 241,3 7,92 R45 211,12 7,92 11,91 269,7 22,4 12 3/4 120,7 139,7
8 269,7 1,6 301,8 7,92 R49 269,88 7,92 11,91 330,2 25,4 12 7/8 139,7 152,4
10 323,9 1,6 355,6 7,92 R53 323,85 7,92 11,91 387,4 28,8 16 1 158,8 171,5
12 381,0 1,6 412,8 7,92 R57 381,00 7,92 11,91 450,9 31,8 16 1 1/8 171,5 184,2
14 412,8 1,6 457,2 7,92 R61 419,10 7,92 11,91 514,4 31,8 20 1 1/8 177,8 190,5
16 469,9 1,6 508,0 7,92 R65 469,90 7,92 11,91 571,5 35,1 20 1 1/4 190,5 203,2
18 533,4 1,6 574,5 7,92 R69 533,40 7,92 11,91 628,7 35,1 24 1 1/4 196,9 209,6
20 584,2 1,6 635,0 9,53 R73 584,20 9,53 13,49 685,8 35,1 24 1 1/4 203,2 222,3
24 692,2 1,6 479,3 11,13 R77 692,15 11,13 16,66 812,8 41,1 24 1 1/2 228,6 254,0
NOTE: All dimensions except NPS and bolt diameter are in millimeters. The dimensions B2 for SW flange equals B or Weld Neck.1) the tolerance for E is only applicable for groove depth
E [Note (1)]P
E [Note (1)]
K min.
RBc
F23 deg.
R
O
L
STUD BOLT WITH NUTS
102
ASME B16.5FLANGES6.3
CLASS 400 FLANGES
DIMENSIONS OF CLASS 400 FLANGES
Flange dimensions
HUB dimensions Length Through HUB Threaded
flang SW Bore
Nom-inal Pipe Size
OD flang
Thickn.Large end
Small end
Thr. Slip. Sw.
LappedWeld neck
Counter bore
Thread length
Socket depth
Slip-On, SW
LappedWeld neck
NPS O C min. X A Y Y Y Q min. T min. D B min. B min. B
1/2
3/4
1
1 1/4
1 1/2 Use Class 600 dimensions in these sizes
2
2 1/2
3
3 1/2
4 254,0 35,1 146,1 114,3 50,8 50,8 88,9 117,6 36,6 116,1 116,8
5 279,4 381 177,8 141,2 53,8 53,8 101,6 144,5 42,9 143,8 144,5 To be
6 317,5 41,1 206,2 168,4 57,2 57,2 103,1 171,5 46,0 170,7 171,5 specifie
8 381,0 47,8 260,4 219,2 68,3 68,3 117,3 222,3 50,8 221,5 222,3 by
10 444,5 53,8 320,5 273,1 73,2 101,6 124,0 276,4 55,6 276,4 277,4 purchaser
12 520,7 57,2 374,7 323,9 79,2 108,0 136,7 328,7 60,5 327,2 328,2
14 584,2 60,5 425,5 355,6 84,1 117,3 149,4 360,4 63,5 359,2 360,2
16 647,7 63,5 482,6 406,4 93,7 127,0 152,4 411,2 68,3 410,5 411,2
18 711,2 66,5 533,4 457,2 98,6 136,7 165,1 462,0 69,9 461,8 462,3
20 774,7 69,9 587,2 508,0 101,6 146,1 168,1 512,8 73,2 513,1 514,4
24 914,4 76,2 701,5 609,6 114,3 158,8 174,8 614,4 82,6 616,0 616,0
NOTE: All dimensions except NPS and bolt diameter are in millimeters.
YC
XQ
O
THREADED
T YC
XB
O
SLIP˜ON WELDING
Y
C
X
A
O
WELDING NECK
C
O
BLIND
C
XB
O
LAPPED
Y
B
103
FLANGESASME B16.5 6.3
CLASS 400 FLANGES
DIMENSIONS OF CLASS 400 FLANGES
RF dimensions RTJ dimensions Bolt hole drilling Stud bolt
length
Nom-inal Pipe Size
OD Height OD HeightGroove numb.
Groove Pitch
Groove Depth
Groove Width
Bolt Circle
Bolt hole
No of bolts
Bolt diam.
6.4 mm RF
Ring Joint
NPS R K E P E F Bc Bh L L
1/2
3/4
1
1 1/4
1 1/2 Use Class 600 dimensions in these sizes
2
2 1/2
3
3 1/2
4 157,2 6,4 174,8 7,92 R37 149,23 7,92 11,91 200,2 25,4 8 7/8 139,7 139,7
5 185,7 6,4 209,6 7,92 R41 180,98 7,92 11,91 235,0 25,4 8 7/8 146,1 146,1
6 215,9 6,4 241,3 7,92 R45 211,12 7,92 11,91 269,7 25,4 12 7/8 152,4 152,4
8 269,7 6,4 301,8 7,92 R49 269,88 7,92 11,91 330,2 28,8 12 1 171,5 171,5
10 323,9 6,4 355,6 7,92 R53 323,85 7,92 11,91 387,4 31,8 16 1 1/8 190,5 190,5
12 381,0 6,4 412,8 7,92 R57 381,00 7,92 11,91 450,9 35,1 16 1 1/4 203,2 203,2
14 412,8 6,4 457,2 7,92 R61 419,10 7,92 11,91 514,4 35,1 20 1 1/4 209,6 209,6
16 469,9 6,4 508,0 7,92 R65 469,90 7,92 11,91 571,5 38,1 20 1 3/8 222,3 222,3
18 533,4 6,4 574,5 7,92 R69 533,40 7,92 11,91 628,7 38,1 24 1 3/8 228,6 228,6
20 584,2 6,4 635,0 9,53 R73 584,20 9,53 13,49 685,8 41,1 24 1 1/2 241,3 247,7
24 692,2 6,4 479,3 11,13 R77 692,15 11,13 16,66 812,8 47,8 24 1 3/4 266,7 279,4
NOTE: All dimensions except NPS and bolt diameter are in millimeters.1) the tolerance for E is only applicable for groove depth
E [Note (1)]P
E [Note (1)]
K min.
RBc
F23 deg.
R
O
L
STUD BOLT WITH NUTS
104
ASME B16.5FLANGES6.4
CLASS 600 FLANGES
DIMENSIONS OF CLASS 600 FLANGES
Flange dimensions
HUB dimensions Length Through HUB Threaded
flang SW Bore
Nom-inal Pipe Size
OD flang
Thickn.Large end
Small end
Thr. Slip. Sw.
LappedWeld neck
Counter bore
Thread length
Socket depth
Slip-On, SW
LappedWeld neck
NPS O C min. X A Y Y Y Q min. T min. D B min. B min. B
1/2 95,3 14,2 38,1 21,3 22,4 22,4 52,3 23,6 15,7 9,7 22,4 22,9
3/4 117,3 15,7 47,8 26,7 25,4 25,4 57,2 29,0 15,7 11,2 27,7 28,2
1 124,0 17,5 53,8 33,5 26,9 26,9 62,0 35,8 17,5 12,7 34,5 35,1
1 1/4 133,4 20,6 63,5 42,2 28,4 28,4 66,5 44,5 20,6 14,2 43,2 43,7
1 1/2 155,4 22,4 69,9 48,3 31,8 31,8 69,9 50,5 22,4 15,7 49,5 50,0
2 165,1 25,4 84,1 60,5 36,6 36,6 73,2 63,5 28,4 17,5 62,0 62,5
2 1/2 190,5 28,4 100,1 73,2 41,1 41,1 79,2 76,2 31,8 19,1 74,7 75,4
3 209,6 31,8 117,3 88,9 46,0 46,0 82,6 77,0 35,1 20,6 90,7 91,4
3 1/2 228,6 35,1 133,4 101,6 49,3 49,3 85,9 104,9 39,6 103,4 104,1
4 273,1 38,1 152,4 114,3 53,8 53,8 101,6 117,6 41,1 116,1 116,8
5 330,2 44,5 189,0 141,2 60,5 60,5 114,3 144,5 47,8 143,8 144,5 To be
6 355,6 47,8 222,3 168,4 66,5 66,5 117,3 171,5 50,8 170,7 171,5 specifie
8 419,1 55,6 273,1 219,2 76,2 76,2 133,4 222,3 57,2 221,5 222,3 by
10 508,0 63,5 342,9 273,1 85,9 111,3 152,4 276,4 65,0 276,4 277,4 purchaser
12 558,8 66,5 400,1 323,9 91,9 117,3 155,4 328,7 69,9 327,2 328,2
14 603,3 69,9 431,8 355,6 93,7 127,0 165,1 360,4 73,2 359,2 360,2
16 685,8 76,2 495,3 406,4 106,4 139,7 177,8 411,2 77,7 410,5 411,2
18 743,0 82,6 546,1 457,2 117,3 152,4 184,2 462,0 79,2 461,8 462,3
20 812,8 88,9 609,6 508,0 127,0 165,1 190,5 512,8 82,6 513,1 514,4
24 939,8 101,6 717,6 609,6 139,7 184,2 203,2 614,4 91,9 616,0 616,0
NOTE: All dimensions except NPS and bolt diameter are in millimeters. The dimensions B2 for SW flange equals B or Weld Neck.
YC
XQ
O
THREADED
T YC
XB
YC
O
SLIP˜ON WELDING
Y
C
X
A
O
WELDING NECK
C
O
BLIND
C
XB
O
LAPPED
XB
O
SOCKET WELDING
B2
D
Y
B
105
FLANGESASME B16.5 6.4
CLASS 600 FLANGES
DIMENSIONS OF CLASS 600 FLANGES
RF dimensions RTJ dimensions Bolt hole drilling Stud bolt
length
Nom-inal Pipe Size
OD Height OD HeightGroove numb.
Groove Pitch
Groove Depth
Groove Width
Bolt Circle
Bolt hole
No of bolts
Bolt diam.
6.4 mm RF
Ring Joint
NPS R K E P E F Bc Bh L L
1/2 35,1 6,4 50,8 5,56 R11 34,14 5,56 7,14 66,5 15,7 4 1/2 76,2 76,2
3/4 42,9 6,4 63,5 6,35 R13 42,88 6,35 8,74 82,6 19,1 4 5/8 88,9 88,9
1 50,8 6,4 69,9 6,35 R16 50,80 6,35 8,74 88,9 19,1 4 5/8 88,9 88,9
1 1/4 63,5 6,4 79,2 6,35 R18 60,33 6,35 8,74 98,6 19,1 4 5/8 95,3 95,3
1 1/2 73,2 6,4 90,4 6,35 R20 68,28 6,35 8,74 114,3 22,4 4 3/4 108,0 108,0
2 91,9 6,4 108,0 7,92 R23 82,55 7,92 11,91 127,0 19, 1 8 5/8 108,0 108,0
2 1/2 104,6 6,4 127,0 7,92 R26 101,60 7,92 11,91 149,4 22,4 8 3/4 120,7 120,7
3 127,0 6,4 146,1 7,92 R31 123,83 7,92 11,91 168, 1 22,4 8 3/4 127,0 127,0
3 1/2 139,7 6,4 158,8 7,92 R34 131,78 7,92 11,91 184,2 25,4 8 7/8 139,7 139,7
4 157,2 6,4 174,8 7,92 R37 149,23 7,92 11,91 215,9 25,4 8 7/8 146,1 146,1
5 185,7 6,4 209,6 7,92 R41 180,98 7,92 11,91 266,7 28,4 8 1 165, 1 165,1
6 215,9 6,4 241,3 7,92 R45 211,12 7,92 11,91 292,1 28,4 12 1 171,5 171,5
8 269,7 6,4 301,8 7,92 R49 269,88 7,92 11,91 349,3 31,8 12 1 1/8 190,5 196,9
10 323,9 6,4 355,6 7,92 R53 323,85 7,92 11,91 431,8 35,1 16 1 1/4 215,9 215,9
12 381,0 6,4 412,8 7,92 R57 381,00 7,92 11,91 489,0 35,1 20 1 1/4 222,3 222,3
14 412,8 6,4 457,2 7,92 R61 419,10 7,92 11,91 527,1 38,1 20 1 3/8 235,0 235,0
16 469,9 6,4 508,0 7,92 R65 469,90 7,92 11,91 603,3 41,1 20 1 1/2 254,0 254,0
18 533,4 6,4 574,5 7,92 R69 533,40 7,92 11,91 654,1 44,5 20 1 5/8 273,1 273,1
20 584,2 6,4 635,0 9,53 R73 584,20 9,53 13,49 723,9 44,5 24 1 5/8 285,8 292, 1
24 692,2 6,4 749,3 11,13 R77 692, 15 11,13 16,66 838,2 50,8 24 1 7/8 330,2 336,6
NOTE: All dimensions except NPS and bolt diameter are in millimeters. The dimensions B2 for SW flange equals B or Weld Neck.1) the tolerance for E is only applicable for groove depth
E [Note (1)]P
E [Note (1)]
K min.
RBc
F23 deg.
R
O
L
STUD BOLT WITH NUTS
106
ASME B16.5FLANGES6.5
CLASS 900 FLANGES
DIMENSIONS OF CLASS 900 FLANGES
Flange dimensions
HUB dimensions Length Through HUB Threaded
flang SW Bore
Nom-inal Pipe Size
OD flang
Thickn.Large end
Small end
Thr. Slip. Sw.
LappedWeld neck
Counter bore
Thread length
Socket depth
Slip-On, SW
LappedWeld neck
NPS O C min. X A Y Y Y Q min. T min. D B min. B min. B
1/2
3/4
1
1 1/4
1 1/2 Use Class 1500 dimensions in these sizes
2
2 1/2
3 241,3 38,1 127,0 88,9 53,8 53,8 101,6 92,2 41,1 90,7 91,4
4 292,1 44,5 158,8 114,3 69,9 69,9 114,3 117,6 47,8 116,1 116,8
5 349,3 50,8 190,5 141,2 79,2 79,2 127,0 144,5 53,8 143,8 144,5
6 381,0 55,6 235,0 168,4 85,9 85,9 139,7 171,5 57,2 170,7 171,5 To be
8 469,9 63,5 298,5 219,2 101,6 114,3 162,1 222,3 63,5 221,5 222,3 specifie
10 546,1 69,9 368,3 273,1 108,0 127,0 184,2 276,4 71,4 276,4 277,4 by
12 609,6 79,2 419,1 323,9 117,3 142,7 200,2 328,7 76,2 327,2 328,2 purchaser
14 641,4 85,9 450,9 355,6 130,0 155,4 212,9 360,4 82,6 359,2 360,2
16 704,9 88,9 508,0 406,4 133,4 165,1 215,9 411,2 85,9 410,5 411,2
18 787,4 101,6 565,2 457,2 152,4 190,5 228,6 462,0 88,9 461,8 462,3
20 857,3 108,0 622,3 508,0 158,8 209,6 247,7 512,8 91,9 513,1 514,4
24 1041,4 139,7 749,3 609,6 203,2 266,7 292,1 614,4 101,6 616,0 616,0
NOTE: All dimensions except NPS and bolt diameter are in millimeters.
YC
XQ
O
THREADED
T YC
XB
O
SLIP˜ON WELDING
Y
C
X
A
O
WELDING NECK
C
O
BLIND
C
XB
O
LAPPED
Y
B
107
FLANGESASME B16.5 6.5
CLASS 900 FLANGES
DIMENSIONS OF CLASS 900 FLANGES
RF dimensions RTJ dimensions Bolt hole drilling Stud bolt
length
Nom-inal Pipe Size
OD Height OD HeightGroove numb.
Groove Pitch
Groove Depth
Groove Width
Bolt Circle
Bolt hole
No of bolts
Bolt diam.
6.4 mm RF
Ring Joint
NPS R K E P E F Bc Bh L L
1/2
3/4
1
1 1/4
1 1/2 Use Class 1500 dimensions in these sizes
2
2 1/2
3 127,0 6,4 155,4 7,92 R31 123,83 7,92 11,91 190,5 25,4 8 7/8 146,1 146,1
4 157,2 6,4 180,8 7,92 R37 149,23 7,92 11,91 235,0 31,8 8 1 1/8 171,5 171,5
5 185,7 6,4 215,9 7,92 R41 180,98 7,92 11,91 279,4 35,1 8 1 1/4 190,5 190,5
6 215,9 6,4 241,3 7,92 R45 211,12 7,92 11,91 317,5 31,8 12 1 1/8 190,5 196,9
8 269,7 6,4 307,8 7,92 R49 269,88 7,92 11,91 393,7 38,1 12 1 3/8 222,3 222,3
10 323,9 6,4 362,0 7,92 R53 323,85 7,92 11,91 469,9 38,1 16 1 3/8 235,0 235,0
12 381,0 6,4 419,1 7,92 R57 381,00 7,92 11,91 533,4 38,1 20 1 3/8 254,0 254,0
14 412,8 6,4 466,9 11,13 R62 419,10 11,13 16,66 558,8 41,1 20 1 1/2 273,1 279,4
16 469,9 6,4 523,7 11,13 R66 469,90 11,13 16,66 616,0 44,5 20 1 5/8 285,8 292,1
18 533,4 6,4 593,9 12,70 R70 533,40 12,70 19,84 685,8 50,8 20 1 7/8 323,9 336,6
20 584,2 6,4 647,7 12,70 R74 584,20 12,70 19,84 749,3 53,8 20 2 349,3 362,0
24 692,2 6,4 771,7 15,88 R78 692, 15 15,88 26,97 901,7 66,5 20 2 1/2 438,2 457,2
NOTE: All dimensions except NPS and bolt diameter are in millimeters.1) the tolerance for E is only applicable for groove depth
E [Note (1)]P
E [Note (1)]
K min.
RBc
F23 deg.
R
O
L
STUD BOLT WITH NUTS
108
ASME B16.5FLANGES6.6
CLASS 1500 FLANGES
DIMENSIONS OF CLASS 1500 FLANGES
Flange dimensions
HUB dimensions Length Through HUB Threaded
flang SW Bore
Nom-inal Pipe Size
OD flang
Thickn.Large end
Small end
Thr. Slip. Sw.
LappedWeld neck
Counter bore
Thread length
Socket depth
Slip-On, SW
LappedWeld neck
NPS O C min. X A Y Y Y Q min. T min. D B min. B min. B
1/2 120,7 22,4 38,1 21,3 31,8 31,8 60,5 23,6 22,4 9,7 22,4 22,9
3/4 130,0 25,4 44,5 26,7 35,1 35,1 69,9 29,0 25,4 11,2 27,7 28,2
1 149,4 28,4 52,3 33,5 41,1 41,1 73,2 35,8 28,4 12,7 34,5 35,1
1 1/4 158,8 28,4 63,5 42,2 41,1 41,1 73,2 44,5 30,2 14,2 43,2 43,7
1 1/2 177,8 31,8 69,9 48,3 44,5 44,5 82,6 50,5 31,8 15,7 49,5 50,0
2 215,9 38,1 104,6 60,5 57,2 57,2 101,6 63,5 38,1 17,5 62,0 62,5
2 1/2 244,3 41,1 124,0 73,2 63,5 63,5 104,6 76,2 47,8 19,1 74,7 75,4
3 266,7 47,8 133,4 88,9 73,2 117,3 91,4
4 311,2 53,8 162,1 114,3 90,4 124,0 116,8
5 374,7 73,2 196,9 141,2 104,6 155,4 144,5
6 393,7 82,6 228,6 168,4 119,1 171,5 171,5 To be
8 482,6 91,9 292,1 219,2 142,7 212,9 222,3 specifie
10 584,2 108,0 368,3 273,1 177,8 254,0 277,4 by
12 673,1 124,0 450,9 323,9 218,9 282,4 328,2 purchaser
14 749,3 133,4 495,3 355,6 241,3 298,5 360,2
16 825,5 146,1 552,5 406,4 260,4 311,2 411,2
18 914,4 162,1 596,9 457,2 276,4 327,2 462,3
20 984,3 177,8 641,4 508,0 292,1 355,6 514,4
24 1168,4 203,2 762,0 609,6 330,2 406,4 616,0
NOTE: All dimensions except NPS and bolt diameter are in millimeters. The dimensions B2 for SW flange equals B or Weld Neck.
YC
XQ
O
THREADED
T YC
XB
YC
O
SLIP˜ON WELDING
Y
C
X
A
O
WELDING NECK
C
O
BLIND
C
XB
O
LAPPED
XB
O
SOCKET WELDING
B2
D
Y
B
109
FLANGESASME B16.5 6.6
CLASS 1500 FLANGES
DIMENSIONS OF CLASS 1500 FLANGES
RF dimensions RTJ dimensions Bolt hole drilling Stud bolt
length
Nom-inal Pipe Size
OD Height OD HeightGroove numb.
Groove Pitch
Groove Depth
Groove Width
Bolt Circle
Bolt hole
No of bolts
Bolt diam.
6.4 mm RF
Ring Joint
NPS R K E P E F Bc Bh L L
1/2 35, 1 6,4 60,5 6,35 R12 39,67 6,35 8,74 82,6 22,4 4 3/4 108,0 108,0
3/4 42,9 6,4 66,5 6,35 R14 44,45 6,35 8,74 88,9 22,4 4 3/4 114,3 114,3
1 50,8 6,4 71,4 6,35 R16 50,80 6,35 8,74 101,6 25,4 4 7/8 127,0 127,0
1 1/4 63,5 6,4 81,0 6,35 R18 60,33 6,35 8,74 111,3 25,4 4 7/8 127,0 127,0
1 1/2 73,2 6,4 91,9 6,35 R20 68,28 6,35 8,74 124,0 28,4 4 1 139,7 139,7
2 91,9 6,4 124,0 7,92 R24 95,25 7,92 11,91 165,1 25,4 8 7/8 146,1 146,1
2 1/2 104,6 6,4 136,7 7,92 R27 107,95 7,92 11,91 190,5 28,4 8 1 158,8 158,8
3 127,0 6,4 168,1 7,92 R35 136,53 7,92 11,91 203,2 31,8 8 1 1/8 177,8 177,8
4 157,2 6,4 193,5 7,92 R39 161,93 7,92 11,91 241,3 35,1 8 1 1/4 196,9 196,9
5 185,7 6,4 228,6 7,92 R44 193,68 7,92 11,91 292,1 41,1 8 1 1/2 247,7 247,7
6 215,9 6,4 247,7 9,53 R46 211,12 9,53 13,49 317,5 38,1 12 1 3/8 260,4 266,7
8 269,7 6,4 317,5 11,13 R50 269,88 11,13 16,66 393,7 44,5 12 1 5/8 292,1 323,9
10 323,9 6,4 371,3 11,13 R54 323,85 11,13 16,66 482,6 50,8 12 1 7/8 336,6 342,9
12 381,0 6,4 438,2 14,27 R58 381,00 14,27 23,01 571,5 53,8 16 2 374,7 387,4
14 412,8 6,4 489,0 15,88 R63 419,10 15,88 26,97 635,0 60,5 16 2 1/4 406,4 425,5
16 469,9 6,4 546,1 17,48 R67 469,90 17,48 30,18 704,9 66,5 16 2 1/2 444,5 469,9
18 533,4 6,4 612,6 17,48 R71 533,40 17,48 30,18 774,7 73,2 16 2 3/4 495,3 527,1
20 584,2 6,4 673,1 17,48 R75 584,20 17,48 33,32 831,9 79,2 16 3 539,8 565,2
24 692,2 6,4 793,8 20,62 R79 692,15 20,62 36,53 990,6 91,9 16 3 1/2 616,0 647,7
NOTE: All dimensions except NPS and bolt diameter are in millimeters. The dimensions B2 for SW flange equals B or Weld Neck.1) the tolerance for E is only applicable for groove depth
E [Note (1)]P
E [Note (1)]
K min.
RBc
F23 deg.
R
O
L
STUD BOLT WITH NUTS
110
ASME B16.5FLANGES6.7
CLASS 2500 FLANGES
DIMENSIONS OF CLASS 2500 FLANGES
Flange dimensions
HUB dimensions Length Through HUB Threaded
flang SW Bore
Nom-inal Pipe Size
OD flang
Thickn.Large end
Small end
Thr. Slip. Sw.
LappedWeld neck
Counter bore
Thread length
Socket depth
Slip-On, SW
LappedWeld neck
NPS O C min. X A Y Y Y Q min. T min. D B min. B min. B
1/2 133,4 30,2 42,9 21,3 39,6 39,6 73,4 23,6 28,4 22,9
3/4 139,7 31,8 50,8 26,7 42,9 42,9 79,2 29,0 31,8 28,2
1 158,8 35,1 57,2 33,5 47,8 47,8 88,9 35,8 35,1 35,1
1 1/4 184,2 38,1 73,2 42,2 52,3 52,3 95,3 44,5 38,1 43,7
1 1/2 203,2 44,5 79,2 48,3 60,5 60,5 111,3 50,5 44,5 50,0 To be
2 235,0 50,8 95,3 60,5 69,9 69,9 127,0 63,5 50,8 62,5 specifie
2 1/2 266,7 57,2 114,3 73,2 79,2 79,2 142,7 76,2 57,2 75,4 by
3 304,8 66,5 133,4 88,9 91,9 168,1 91,4 purchaser
4 355,6 76,2 165,1 114,3 108,0 190,5 116,8
5 419,1 91,9 203,2 141,2 130,0 228,6 144,5
6 482,6 108,0 235,0 168,4 152,4 273,1 171,5
8 552,5 127,0 304,8 219,2 177,8 317,5 222,3
10 673,1 165,1 374,7 273,1 228,6 419,1 277,4
12 762,0 184,2 441,5 323,9 254,0 463,6 328,2
NOTE: All dimensions except NPS and bolt diameter are in millimeters.
YC
XQ
O
THREADED
T
Y
C
X
A
O
WELDING NECK
C
O
BLIND
C
XB
O
LAPPED
Y
B
111
FLANGESASME B16.5 6.7
CLASS 2500 FLANGES
E [Note (1)]P
E [Note (1)]
K min.
RBc
F23 deg.
R
O
L
STUD BOLT WITH NUTS
DIMENSIONS OF CLASS 2500 FLANGES
RF dimensions RTJ dimensions Bolt hole drilling Stud bolt
length
Nom-inal Pipe Size
OD Height OD HeightGroove numb.
Groove Pitch
Groove Depth
Groove Width
Bolt Circle
Bolt hole
No of bolts
Bolt diam.
6.4 mm RF
Ring Joint
NPS R K E P E F Bc Bh L L
1/2 35, 1 6,4 65,0 6,35 R13 42,88 6,35 8,74 88,9 22,4 4 3/4 120,7 120,7
3/4 42,9 6,4 73,2 6,35 R16 50,80 6,35 8,74 95,3 22,4 4 3/4 127,0 127,0
1 50,8 6,4 82,6 6,35 R18 60,33 6,35 8,74 108,0 25,4 4 7/8 139,7 139,7
1 1/4 63,5 6,4 101,6 7,92 R21 72,24 7,92 11,91 130,0 28,4 4 1 152,4 152,4
1 1/2 73,2 6,4 114,3 7,92 R23 82,55 7,92 11,91 146,1 31,8 4 1 1/8 171,5 171,5
2 91,9 6,4 133,4 7,92 R26 101,60 7,92 11,91 171,5 28,4 8 1 177,8 177,8
2 1/2 104,6 6,4 149,4 9,53 R28 111,13 9,53 13,49 196,9 31,8 8 1 1/8 196,9 203,2
3 127,0 6,4 168,1 9,53 R32 127,00 9,53 13,48 228,6 35,1 8 1 1/4 222,3 228,6
4 157,2 6,4 203,2 11,13 R38 157,18 11,13 16,66 273,1 41,1 8 1 1/2 254,0 260,4
5 185,7 6,4 241,3 12,70 R42 190,50 12,70 19,84 323,9 47,8 8 1 3/4 298,5 311,2
6 215,9 6,4 279,4 12,70 R47 228,60 12,70 19,84 368,3 53,8 8 2 342,9 355,6
8 269,7 6,4 339,9 14,27 R51 279,40 14,27 23,01 438,2 53,8 12 2 381,0 393,7
10 323,9 6,4 425,5 17,48 R55 342,90 17,48 30,18 539,8 66,5 12 2 1/2 489,0 508,0
12 381,0 6,4 495,3 17,48 R60 406,40 17,48 33,32 619,3 73,2 12 2 3/4 539,8 558,8
NOTE: All dimensions except NPS and bolt diameter are in millimeters.1) the tolerance for E is only applicable for groove depth
112
ASME B16.5FLANGES6.8
DIMENSIONAL TOLERANCES OF ASME B16.5 FLANGES
DENOMINATION DESCRIPTION SIZE RANGE TOLERANCE
O Outside Diameter When OD is 24" or less ±1,6 mm
flange rin When OD is over 24" ±3,2 mm
WELD NECK
B Inside Diameter/bore 10" and smaller ±0,8 mm
12" to 18" ±1,6 mm
20" and larger +3,2 mm/-1,6 mm
SLIP-ON, LAP JOINT, SOCKET WELD, COUNTER BORE
10" and smaller +0,8 mm/-0,0mm
12" and larger +1,6 mm/-0,0 mm
A Diameter of Hub at Base When Hub Base is 24" or less +1,6 mm/-0,8 mm
When Hub Base is over 24" +3,2 mm/-0,8 mm
X Drilling and Facing Bolt Circle Diameter ±1,6 mm
Center-to-center of adjacent bolt holes ±0,8 mm
Max eccentricity between bolt circle dia.
and machined facing diameters:
sizes 2 1/2" and smaller ±0,8 mm
sizes 3" and larger ±1,6 mm
Y Overall Length of Hub 4" and smaller ±1,6 mm
ofWN flange 5" to 10" +1,6 mm/-3,2 mm
12" and larger +3,2 mm/-4,6 mm
C Thickness of Flange ring 18" and smaller +3,2 mm/-0,0 mm
20" and larger +4,8 mm/-0,0mm
E Ring joint depth +0,41 mm/-0,00 mm
(Applicable for groove depth only)
F Groove width ±0,20 mm
P Groove pitch ±0,13 mm
K RTJ Raised portion +0,50 mm/-0,00 mm
R RF Raised portion 1,6 mm RF height ±0,80 mm
6,4 mm RF height ±0,50 mm
113
FLANGESASME B16.36 6.9
ORIFICE FLANGES
Orifi e Flanges are used with orifi e meters for the purpose of measuring the fl w rate of either liquids or gases in the respective pipeline. Pairs of pressure “Tappings”, mostly on 2 sides, directly opposite each other, are machined into the orifi e flange. This ma es separate orifi e carriers or tappings in the pipe wall unnecessary.
Orifi e Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with xtra machining.
The illustration above shows a set Orifi e Flanges, where a Orifi e Plate is mounted and a jack screw is machined. This jack screw is used to facilitate separating the flanges or inspection or replacement of the Orifi e Plate and gaskets.
The range of orifi e flanges overs all standard sizes and ranges, and all common flange ma erials. Flanges are available in Welding Neck, Slip On and Threaded form, and are typically supplied with two 1/2” NPT tappings in each flange.
ASME B16.36 covers Dimensions and dimensional tolerances from orifi e flanges (similar o those covered in ASME B16.5) that have orifi e pressure differential connections. Coverage is limited to the following flanges:• Welding Neck Classes 300, 400, 600, 900, 1500, 2500• Slip On Class 300• Threaded Class 300
114
FLANGES ASME B16.366.9
ORIFICE FLANGES ̄300¯1500LB/SQ.IN.
X
1” = 25.4 mm
Pipe-TapsAPI-
TAP HOLES1/2” API-thread for flanges cla s 300, 400 and 600.3/4” API-thread for flanges cla s 900 and 1500.
TAP HOLE DIAMETERS0.250” for DN 2 1/2” and smaller0.375” for DN 3”0.500” for DN 4” and larger
DISTANCE OF HOLES “X”0.938” for all flanges with aised faces.
The distance from the centerline of the tap hole to the face of the flange is 0.750” or flanges ring type joint with a g oove depth of 0.375” and smaller. In case of a groove depth of 0.438” and larger an alternation of the diameter or type of the tap hole is necessary.
MINIMUM FLANGE THICKNESSIn order to obtain space for the tap holes the thickness of the flanges in the ange of the small sizes is as follows:1.500” for raised face flanges cla s 300-6001.375” for raised face flanges cla s 900-15001.250” for ring type joint flanges cla s 300-1500.
115
FLANGESASME B16.36 6.9
DIMENSIONS ORIFICE WELD NECK RF FLANGES
CLASS 300
NPS
HUB DIA
DIA RF
OUT DIA
MIN THK FLG
HGT FLG
HUB DIA
DIA OF
TAB
A R O T H X Tg
1 33,4 50,8 125 36,6 81 54 6,4
1 1/2 48,3 73,0 155 36,6 84 70 6,4
2 60,3 92,1 165 36,6 84 84 6,4
2 1/2 73,0 104,8 190 36,6 87 100 6,4
3 88,9 127,0 210 36,6 87 117 9,5
4 114,3 157,2 255 36,6 90 146 12,7
6 168,3 215,9 320 36,6 98 206 12,7
8 219,1 269,9 380 39,7 110 260 12,7
10 273,0 323,8 445 46,1 116 321 12,7
12 323,8 381,0 520 49,3 129 375 12,7
14 355,6 412,8 585 52,4 141 425 12,7
16 406,4 469,9 650 55,6 144 483 12,7
18 457,0 533,4 710 58,8 157 533 12,7
20 508,0 584,2 775 62,0 160 587 12,7
24 610,0 692,2 915 68,3 167 702 12,7
NOTE: Dimensions in mm
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT
LENGTH
1 88,9 4 11/16 5/8 125
1 1/2 114,3 4 13/16 3/4 135
2 127,0 8 11/16 5/8 125
2 1/2 149,2 8 13/16 3/4 135
3 168,3 8 13/16 3/4 135
4 200,0 8 13/16 3/4 135
6 269,9 12 7/8 3/4 135
8 330,2 12 1 7/8 145
10 387,4 16 1. 1/8 1 165
12 450,8 16 1 1/4 1. 1/8 180
14 514,4 20 1 1/4 1. 1/8 185
16 571,5 20 1. 3/8 1 1/4 195
18 628,6 24 1. 3/8 1 1/4 205
20 685,8 24 1. 3/8 1 1/4 215
24 812,8 24 1. 5/8 1 1/2 240
H
A
RO
X
T24
Rf
1/2 NPTTg
B
116
FLANGES ASME B16.366.9
DIMENSIONS ORIFICE WELD NECK RF FLANGES
CLASS 600
NPS
HUB DIA
DIA RF
OUT DIA
MIN THK FLG
HGT FLG
HUB DIA
DIA OF
TAB
A R O T H X Tg
1 50,8 125 36,6 81 54 33,5 6,4
1 1/2 73,0 155 36,6 84 70 48,3 6,4
2 92,1 165 36,6 84 84 60,3 6,4
2 1/2 104,8 190 36,6 87 100 73,0 6,4
3 127,0 210 36,6 87 117 88,9 9,5
4 157,2 275 38,1 102 152 114,3 12,7
6 215,9 355 47,7 117 222 168,3 12,7
8 269,9 420 55,6 133 173 219,1 12,7
10 323,8 510 63,5 152 343 273,0 12,7
12 381,0 560 66,7 156 400 323,8 12,7
14 412,8 605 69,9 165 432 355,6 12,7
16 469,9 685 76,2 178 495 406,4 12,7
18 533,4 745 82,6 184 546 457,2 12,7
20 584,2 815 88,9 190 610 508,0 12,7
24 692,2 940 101,6 203 718 609,6 12,7
NOTE: Dimensions in mm
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT
LENGTH
1 88,9 4 11/16 5/8 125
1 1/2 114,3 4 13/16 3/4 135
2 127,0 8 11/16 5/8 125
2 1/2 149,2 8 13/16 3/4 135
3 168,3 8 13/16 3/4 135
4 215,9 8 1 7/8 150
6 292,1 12 1. 1/8 1 180
8 349,2 12 1 1/4 1. 1/8 195
10 431,8 16 1. 3/8 1 1/4 220
12 489,0 20 1. 3/8 1 1/4 230
14 527,0 20 1 1/2 1. 3/8 240
16 603,2 20 1. 5/8 1 1/2 260
18 654,0 20 1. 3/4 1. 5/8 280
20 723,9 24 1. 3/4 1. 5/8 300
24 838,2 24 2 1. 7/8 335
H
A
RO
X
T24
Rf
1/2 NPTTg
B
117
FLANGESASME B16.36 6.9
DIMENSIONS ORIFICE WELD NECK RF FLANGES
CLASS 900
NPS
HUB DIA
DIA RF
OUT DIA
MIN THK FLG
HGT FLG
HUB DIA
DIA OF
TAB
A R O T H X Tg
1 50,8 125 36,6 81 54 33,5 6,4
1 1/2 73,0 155 36,6 84 70 48,3 6,4
2 92,1 165 36,6 84 84 60,3 6,4
2 1/2 104,8 190 36,6 87 100 73,0 6,4
3 127,0 240 38,1 102 127 88,9 9,5
4 157,2 290 44,5 114 159 114,3 12,7
6 215,9 380 55,6 140 235 168,3 12,7
8 269,9 470 63,5 162 298 219,1 12,7
10 323,8 545 69,9 184 368 273,0 12,7
12 381,0 610 79,4 200 419 323,8 12,7
14 412,8 640 85,8 213 451 355,6 12,7
16 469,9 705 88,9 216 508 406,4 12,7
18 533,4 785 101,6 229 565 457,2 12,7
20 584,2 855 108,0 248 622 508,0 12,7
24 692,2 1040 139,7 292 749 609,6 12,7
NOTE: Dimensions in mm
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT
LENGTH
1 88,9 4 11/16 5/8 125
1 1/2 114,3 4 13/16 3/4 135
2 127,0 8 11/16 5/8 125
2 1/2 149,2 8 13/16 3/4 135
3 190,5 8 1 7/8 150
4 235,0 8 1 1/4 1. 1/8 180
6 317,5 12 1 1/4 1. 1/8 195
8 393,7 12 1 1/2 1. 3/8 230
10 469,9 16 1 1/2 1. 3/8 240
12 533,4 20 1 1/2 1. 3/8 260
14 558,8 20 1. 5/8 1 1/2 280
16 616,0 20 1. 3/4 1. 5/8 290
18 685,8 20 2 1. 7/8 330
20 749,3 20 2. 1/8 2 355
24 901,7 20 2 5/8 2 1/2 445
H
A
RO
X
T24
Rf
1/2 NPTTg
B
118
FLANGES ASME B16.366.9
DIMENSIONS ORIFICE WELD NECK RF FLANGES
CLASS 1500
NPS
HUB DIA
DIA RF
OUT DIA
MIN THK FLG
HGT FLG
HUB DIA
DIA OF
TAB
A R O T H X Tg
1 50,8 150 38,1 83 52 33,5 6,4
1 1/2 73,0 180 38,1 89 70 48,3 6,4
2 92,1 215 38,1 102 105 60,3 6,4
2 1/2 104,8 245 41,3 105 124 73,0 6,4
3 127,0 265 47,7 117 133 88,9 9,5
4 157,2 310 54,0 124 162 114,3 12,7
6 215,9 395 82,6 171 229 168,3 12,7
8 269,9 485 92,1 213 292 219,1 12,7
10 323,8 585 108,0 254 368 273,0 12,7
12 381,0 675 123,9 283 451 323,8 12,7
14 412,8 750 133,4 298 495 355,6 12,7
16 469,9 825 146,1 311 552 406,4 12,7
18 533,4 915 162,0 327 597 457,2 12,7
20 584,2 985 177,8 356 641 508,0 12,7
24 692,2 1170 203,2 406 762 609,6 12,7
NOTE: Dimensions in mm
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT
LENGTH
1 101,6 4 1 7/8 150
1 1/2 123,8 4 1. 1/8 1 160
2 165,1 8 1 7/8 150
2 1/2 190,5 8 1. 1/8 1 165
3 203,2 8 1 1/4 1. 1/8 185
4 241,3 8 1. 3/8 1 1/4 205
6 317,5 12 1 1/2 1. 3/8 265
8 393,7 12 1. 3/4 1. 5/8 300
10 482,6 16 2 1. 7/8 345
12 571,6 16 2. 1/8 2 380
14 635,0 16 2 3/8 2 1/4 415
16 704,8 16 2 5/8 2 1/2 450
18 774,7 16 2 7/8 2. 3/4 500
20 831,8 16 3. 1/8 3 454
24 990,6 16 3. 5/8 3 1/2 620
H
A
RO
X
T24
Rf
1/2 NPTTg
B
119
FLANGESASME B16.36 6.9
DIMENSIONS ORIFICE WELD NECK RF FLANGES
CLASS 2500
NPS
HUB DIA
DIA RF
OUT DIA
MIN THK FLG
HGT FLG
HUB DIA
DIA OF
TAB
A R O T H X Tg
1 50,8 160 38,1 92 57 33,5 6,4
1 1/2 73,0 205 44,5 111 79 48,3 6,4
2 92,1 235 50,8 127 95 60,3 6,4
2 1/2 104,8 265 57,2 143 114 73,0 6,4
3 127,0 305 66,7 168 133 88,9 9,5
4 157,2 355 76,2 190 165 114,3 12,7
6 215,9 485 108,0 273 235 168,3 12,7
8 269,9 550 127,0 318 305 219,1 12,7
10 323,8 675 165,1 419 375 273,0 12,7
12 381,0 760 184,2 464 441 323,8 12,7
NOTE: Dimensions in mm
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT
LENGTH
1 108,0 4 1 7/8 150
1 1/2 146,0 4 1 1/4 1. 1/8 180
2 171,4 8 1. 1/8 1 185
2 1/2 196,8 8 1 1/4 1. 1/8 205
3 228,6 8 1. 3/8 1 1/4 230
4 273,0 8 1. 5/8 1 1/2 260
6 368,3 8 2. 1/8 2 350
8 438,2 12 2. 1/8 2 385
10 539,8 12 2 5/8 2 1/2 490
12 619,1 12 2 7/8 2. 3/4 540
H
A
RO
X
T24
Rf
1/2 NPTTg
B
120
FLANGES ASME B16.366.10
DIMENSIONS ORIFICE WELD NECK RTJ FLANGES
CLASS 600
NPS
OUT DIA
MIN THK FLG
HGT FLG
GRV NO
PITCH DIA
GRV DEPTH
O T H P E
1 125 36,6 81 R16 50,80 6,35
1 1/2 155 36,6 84 R20 68,27 6,35
2 165 36,6 84 R23 82,55 7,92
2 1/2 190 36,6 87 R26 101,60 7,92
3 210 36,6 87 R31 123,83 7,92
4 275 38,1 102 R37 149,23 7,92
6 355 47,7 117 R45 211,12 7,92
8 420 55,6 133 R49 269,88 7,92
10 510 63,5 152 R53 323,85 7,92
12 560 66,7 156 R57 381,00 7,92
14 605 69,9 165 R61 419,10 7,92
16 685 76,2 178 R65 469,90 7,92
18 745 82,6 184 R69 533,40 7,92
20 815 88,9 190 R73 584,20 9,53
24 940 101,6 203 R77 692,15 11,13
NOTE: Dimensions in mm
NPS
GRV WIDTH R BTM
HGT OVAL RING
HUB DIA
HUB DIA
DIA OF TAP
F R W X A Tg
1 8,74 0,8 25,4 54 33,5 6,4
1 1/2 8,74 0,8 25,4 70 48,3 6,4
2 11,91 0,8 27,0 84 60,3 6,4
2 1/2 11,91 0,8 27,0 100 73,0 6,4
3 11,91 0,8 27,0 117 88,9 9,5
4 11,91 0,8 27,0 152 114,3 12,7
6 11,91 0,8 27,0 222 168,3 12,7
8 11,91 0,8 27,0 273 219,1 12,7
10 11,91 0,8 27,0 343 273,0 12,7
12 11,91 0,8 27,0 400 323,8 12,7
14 11,91 0,8 27,0 432 355,6 12,7
16 11,91 0,8 30,2 495 406,4 12,7
18 11,91 0,8 30,2 546 457,2 12,7
20 13,49 1,5 31,8 610 508,0 12,7
24 16,66 1,5 36,5 718 609,6 12,7
H
A
PO
X
T19
E
1/2 NPTTg
B
F
R
W
Special one- or two-piece ring and Orifice
plate assembly
Groove detail
121
FLANGESASME B16.36 6.10
DIMENSIONS ORIFICE WELD NECK RTJ FLANGES
CLASS 600
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT LENGTH
1 88,9 4 3/4 5/8 140
1 1/2 114,3 4 7/8 3/4 140
2 127,0 8 3/4 5/8 140
2 1/2 149,2 8 7/8 3/4 145
3 168,3 8 7/8 3/4 145
4 215,9 8 1 7/8 165
6 292,1 12 1. 1/8 1 190
8 349,2 12 1 1/4 1. 1/8 210
10 431,8 16 1. 3/8 1 1/4 235
12 489,0 20 1. 3/8 1 1/4 240
14 527,0 20 1 1/2 1. 3/8 255
16 603,2 20 1. 5/8 1 1/2 275
18 654,0 20 1. 3/4 1. 5/8 290
20 723,9 24 1. 3/4 1. 5/8 320
24 838,2 24 2 1. 7/8 350
NOTE: Dimensions in mm
H
A
PO
X
T19
E
1/2 NPTTg
B
F
R
W
Special one- or two-piece ring and Orifice
plate assembly
Groove detail
122
FLANGES ASME B16.366.10
DIMENSIONS ORIFICE WELD NECK RTJ FLANGES
CLASS 900
NPS
OUT DIA
MIN THK FLG
HGT FLG
GRV NO
PITCH DIA
GRV DEPTH
O T H P E
1 125 36,6 81 R16 50,80 6,35
1 1/2 155 36,6 84 R20 68,27 6,35
2 165 36,6 84 R23 82,55 7,92
2 1/2 190 36,6 87 R26 101,60 7,92
3 240 38,1 102 R31 123,83 7,92
4 290 44,5 114 R37 149,23 7,92
6 380 55,6 140 R45 211,12 7,92
8 470 63,5 162 R49 269,88 7,92
10 545 69,9 184 R53 323,85 7,92
12 610 79,4 200 R57 381,00 7,92
14 640 85,8 213 R62 419,10 11,13
16 705 88,9 216 R66 469,90 11,13
18 785 101,6 229 R70 533,40 12,70
20 855 108,0 248 R74 584,20 12,70
24 1040 139,7 292 R78 692,15 15,88
NOTE: Dimensions in mm
NPS
GRV WIDTH R BTM
HGT OVAL RING
HUB DIA
HUB DIA
DIA OF TAP
F R W X A Tg
1 8,74 0,8 25,4 54 33,5 6,4
1 1/2 8,74 0,8 25,4 70 48,3 6,4
2 11,91 0,8 27,0 84 60,3 6,4
2 1/2 11,91 0,8 27,0 100 73,0 6,4
3 11,91 0,8 27,0 127 88,9 9,5
4 11,91 0,8 27,0 159 114,3 12,7
6 11,91 0,8 27,0 235 168,3 12,7
8 11,91 0,8 27,0 298 219,1 12,7
10 11,91 0,8 27,0 368 273,0 12,7
12 11,91 0,8 27,0 419 323,8 12,7
14 16,66 1,5 33,3 451 355,6 12,7
16 16,66 1,5 36,5 508 406,4 12,7
18 19,84 1,5 39,7 565 457,2 12,7
20 19,84 1,5 39,7 622 508,0 12,7
24 26,97 2,4 47,6 749 609,6 12,7
H
A
PO
X
T19
E
1/2 NPTTg
B
F
R
W
Special one- or two-piece ring and Orifice
plate assembly
Groove detail
123
FLANGESASME B16.36 6.10
DIMENSIONS ORIFICE WELD NECK RTJ FLANGES
CLASS 900
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT LENGTH
1 88,9 4 3/4 5/8 140
1 1/2 114,3 4 7/8 3/4 140
2 127,0 8 3/4 5/8 140
2 1/2 149,2 8 7/8 3/4 145
3 190,5 8 1 7/8 165
4 235,0 8 1 1/4 1. 1/8 190
6 317,5 12 1 1/4 1. 1/8 210
8 393,7 12 1 1/2 13/8 240
10 469,9 16 1 1/2 13/8 255
12 533,4 20 1 1/2 13/8 275
14 558,8 20 1. 5/8 1 1/2 290
16 616,0 20 1. 3/4 1. 5/8 305
18 685,8 20 2 1 7/8 350
20 749,3 20 2. 1/8 2 375
24 901,7 20 25/8 2 1/2 470
NOTE: Dimensions in mm
H
A
PO
X
T19
E
1/2 NPTTg
B
F
R
W
Special one- or two-piece ring and Orifice
plate assembly
Groove detail
124
FLANGES ASME B16.366.10
DIMENSIONS ORIFICE WELD NECK RTJ FLANGES
CLASS 1500
NPS
OUT DIA
MIN THK FLG
HGT FLG
GRV NO
PITCH DIA
GRV DEPTH
O T H P E
1 150 38,1 83 R16 50,80 6,35
1 1/2 180 38,1 89 R20 68,27 6,35
2 215 38,1 102 R24 95,25 7,92
2 1/2 245 41,3 105 R27 107,95 7,92
3 265 47,7 117 R35 136,53 7,92
4 310 54,0 124 R39 161,93 7,92
6 395 82,6 171 R46 211,14 9,52
8 485 92,1 213 R50 269,88 11,13
10 585 108,0 254 R54 323,85 11,13
12 675 123,9 283 R58 381,00 14,27
14 750 133,4 298 R63 419,10 15,88
16 825 146,1 311 R67 469,90 17,48
18 915 162,0 327 R71 533,40 17,48
20 985 177,8 356 R75 584,20 17,48
24 1170 203,2 406 R79 692,15 20,62
NOTE: Dimensions in mm
NPS
GRV WIDTH R BTM
HGT OVAL RING
HUB DIA
HUB DIA
DIA OF TAP
F R W X A Tg
1 8,74 0,8 25,4 52 33,5 6,4
1 1/2 8,74 0,8 25,4 70 48,3 6,4
2 11,91 0,8 27,0 105 60,3 6,4
2 1/2 11,91 0,8 27,0 124 73,0 6,4
3 11,91 0,8 27,0 133 88,9 9,5
4 11,91 0,8 27,0 162 114,3 12,7
6 13,49 1,5 28,6 229 168,3 12,7
8 16,66 1,5 33,3 292 219,1 12,7
10 16,66 1,5 33,3 368 273,0 12,7
12 23,01 1,5 39,7 451 323,8 12,7
14 26,97 2,4 44,4 495 355,6 12,7
16 30,18 2,4 50,8 552 406,4 12,7
18 30,18 2,4 50,8 597 457,2 12,7
20 33,32 2,4 54,0 641 508,0 12,7
24 36,53 2,4 58,7 762 609,6 12,7
H
A
PO
X
T19
E
1/2 NPTTg
B
F
R
W
Special one- or two-piece ring and Orifice
plate assembly
Groove detail
125
FLANGESASME B16.36 6.10
DIMENSIONS ORIFICE WELD NECK RTJ FLANGES
CLASS 1500
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT LENGTH
1 101,6 4 1 7/8 160
1 1/2 123,8 4 1. 1/8 1 165
2 165,1 8 1 7/8 165
2 1/2 190,5 8 1. 1/8 1 180
3 203,2 8 1 1/4 1. 1/8 185
4 241,3 8 1. 3/8 1 1/4 215
6 317,5 12 1 1/2 1. 3/8 280
8 393,7 12 1. 3/4 1. 5/8 3610
10 482,6 12 2 1 . 7/8 355
12 571,6 16 2. 1/8 2 400
14 635,0 16 2 3/8 2 1/4 445
16 704,8 16 2 5/8 2 1/2 485
18 774,7 16 2 7/8 2. 3/4 535
20 831,8 16 3. 1/8 3 570
24 990,6 16 3. 5/8 3 1/2 660
NOTE: Dimensions in mm
H
A
PO
X
T19
E
1/2 NPTTg
B
F
R
W
Special one- or two-piece ring and Orifice
plate assembly
Groove detail
126
FLANGES ASME B16.366.10
DIMENSIONS ORIFICE WELD NECK RTJ FLANGES
CLASS 2500
NPS
OUT DIA
MIN THK FLG
HGT FLG
GRV NO
PITCH DIA
GRV DEPTH
O T H P E
1 160 38,1 92 R18 60,33 6,35
1 1/2 205 44,5 111 R23 82,55 7,92
2 235 50,8 127 R26 101,60 7,92
2 1/2 265 57,2 143 R28 111,13 9,53
3 305 66,7 168 R32 127,00 9,53
4 355 76,2 190 R38 157,18 11,13
6 485 108,0 273 R47 228,60 12,70
8 550 127,0 318 R51 279,40 14,27
10 675 165,1 419 R55 342,90 17,48
12 760 184,2 464 R60 406,40 17,48
NPS
GRV WIDTH R BTM
HGT OVAL RING
HUB DIA
HUB DIA
DIA OF TAP
F R W X A Tg
1 8,74 0,8 25,4 57 33,5 6,4
1 1/2 11,91 0,8 27,0 79 48,3 6,4
2 11,91 0,8 27,0 95 60,3 6,4
2 1/2 13,49 1,5 30,2 114 73,0 6,4
3 13,49 1,5 30,2 133 88,9 9,5
4 16,66 1,5 33,3 165 114,3 12,7
6 19,84 1,5 36,5 235 168,3 12,7
8 23,01 1,5 39,7 305 219,1 12,7
10 30,18 2,4 47,6 375 273,0 12,7
12 33,32 2,4 50,8 441 323,8 12,7
NPS BOLT CIRCLE
NO OF BOLTS
DIA OF HOLES
DIA STUD BOLTS
STUD BOLT LENGTH
1 108,0 4 1 7/8 160
1 1/2 146,0 4 1 1/4 1. 1/8 190
2 171,4 8 1. 1/8 1 195
2 1/2 196,8 8 1 1/4 1. 1/8 215
3 228,6 8 1. 3/8 1 1/4 240
4 273,0 8 1. 5/8 1 1/2 275
6 368,3 8 2. 1/8 2 370
8 438,2 12 2. 1/8 2 405
10 539,8 12 2 5/8 2 1/2 515
12 619,1 12 2 7/8 2. 3/4 570
NOTE: Dimensions in mm
H
A
PO
X
T19
E
1/2 NPTTg
B
F
R
W
Special one- or two-piece ring and Orifice
plate assembly
Groove detail
127
FLANGESASME B16.36 6.11
ORIFICE FLANGES
L 1.5D
D+3D
A
A
˜Tapped holefor jack screw
Detail - Hole for jack screw
MANUFACTURER 6 150 X5B B16.36 A105/SA106 MGF MADE IN USA X
XX
Manufacturer of Product
Size
Class
Bore (if applicable)
Dimension Specification
Material Specification
Heat Codes
128
ASME B16.5FLANGES6.12
WEIGHT OF FLANGES
150 lb PIPE FLANGES
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Socket Weld
Weld Neck
Blind Lap Joint
1/2 15 0,5 0,5 0,82 0,82 0,5
3/4 20 0,91 0,91 0,82 0,91 0,91
1 25 0,91 0,91 1 1 0,95
1 1/4 32 1,27 1,27 1,36 1,27 1,27
1 1/2 40 1,36 1,36 1,81 1,36 1,36
2 50 2,27 2,27 2,72 2,27 2,27
2 1/2 65 3,63 3,63 4,08 3,18 3,63
3 80 4,08 4,08 4,54 4,08 4,08
3 1/2 90 5 5,44 5,9 5
4 100 5,9 6,8 7,71 5,9
300 lb PIPE FLANGES
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Socket Weld
Weld Neck
Blind Lap Joint
1/2 15 0,68 0,68 0,91 0,91 0,68
3/4 20 1,13 1,13 1,36 1,36 1,13
1 25 1,36 1,36 1,81 1,81 1,36
1 1/4 32 2,04 2,04 2,49 2,72 2,04
1 1/2 40 2,95 2,95 3,18 3,18 2,95
2 50 3,18 3,18 3,63 3,63 3,18
2 1/2 65 4,54 4,54 5,44 5,44 4,54
3 80 5,9 5,9 7,26 7,26 5,9
3 1/2 90 7,26 9,07 9,53 7,26
4 100 9,53 11,34 12,25 9,53
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
5 125 6,8 8,62 9,07 6,8
6 150 8,62 10,89 11,79 8,62
8 200 13,61 17,69 20,41 13,61
10 250 19,5 23,59 31,75 19,5
12 300 29,03 36,29 49,9 29,03
14 350 35,38 49,9 59,42 47,63
16 400 42,18 63,5 77,11 63,5
18 450 54,43 68,04 94,8 72,57
20 500 72,12 81,65 123,4 88,45
24 600 95,25 117,93 186,4 124,74
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
5 125 11,79 15,42 15,88 11,79
6 150 15,88 20,41 22,68 15,88
8 200 24,49 31,75 36,74 24,49
10 250 34,93 44,91 57,61 34,93
12 300 49,9 64,41 83,46 63,5
14 350 74,39 84,37 107,1 86,18
16 400 99,79 111,6 139,3 113,4
18 450 127 138,4 176,9 133,8
20 500 147,4 171,5 223,2 167,8
24 600 222,3 247,2 342 249,5
400 lb PIPE FLANGES
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
4 100 11,79 15,88 14,97 11,34
5 125 14,06 19,5 19,96 13,15
6 150 19,96 25,85 27,67 19,05
8 200 30,36 40,37 45,36 29,03
10 250 41,28 57,15 70,31 50,8
12 300 58,51 80,29 102,5 68,95
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
14 350 86,64 106 141 95,25
16 400 114,8 133,4 180,5 127
18 450 140,6 163,3 227,7 156,5
20 500 171,5 201,9 281,7 190,5
24 600 244,5 290,3 424,6 279
NOTE: All weights in this section are based on approxemate weights for steel. Titanium weights can be calculated as 57% of the table values.
129
FLANGESASME B16.5 6.12
WEIGHT OF FLANGES
600 lb PIPE FLANGES
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Socket Weld
Weld Neck
Blind Lap Joint
1/2 15 1,27 1,27 1,36 0,91 1,27
3/4 20 1,36 1,36 1,59 1,36 1,36
1 25 1,59 1,59 1,81 1,81 1,59
1 1/4 32 2,04 2,04 2,27 2,72 2,04
1 1/2 40 2,95 2,95 3,63 3,63 2,95
2 50 3,63 3,63 4,54 4,54 3,63
2 1/2 65 5,44 5,44 6,35 6,3 5,44
3 80 6,8 6,8 8,16 9,07 6,8
3 1/2 90 9,53 11,79 13,15 9,53
4 100 14,97 16,78 18,6 14,97
1500 lb PIPE FLANGES
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Socket Weld
Weld Neck
Blind Lap Joint
1/2 15 2,72 2,72 3,18 1,81 2,72
3/4 20 3,18 3,18 3,4 2,72 3,18
1 25 3,4 3,4 3,86 4,08 3,4
1 1/4 32 4,54 4,54 4,54 4,54 4,54
1 1/2 40 6,35 6,35 6,35 6,35 6,35
2 50 9,53 9,53 10,89 11,34 9,53
2 1/5 65 16,33 16,33 16,33 15,88 16,33
3 80 21,77 21,77 21,77 21,77
4 100 33,11 31,3 33,11 33,11
5 125 59,87 59,87 64,41 59,87
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
5 125 28,58 30,84 30,84 28,58
6 150 36,29 36,74 39,01 36,29
8 200 44 50,8 63,05 44
10 250 80,29 88,45 108,9 88,45
12 300 97,52 102,5 133,8 108,8
14 350 117,5 157,4 171,5 131,5
16 400 166 218,2 239 181,4
18 450 215,5 251,7 301,6 212,7
20 500 277,6 313 387,8 285,8
24 600 370,1 443,2 533 392,8
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
6 150 74,39 74,39 72,12 74,39
8 200 117 123,8 137 117
10 250 197,8 205,9 230 220
12 300 302,6 313 351,5 285,8
14 350 426,4 442,3 403,7
16 400 567 589,7 521,7
18 450 737,1 793,8 669
20 500 929,9 1009,3 805,2
24 600 1508,3 1644,4 1281,5
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
12 300 147,9 168,7 187,3 167,8
14 350 172,4 254,9 224,1 188,2
16 400 208,2 310,7 280,8 210,9
18 450 293,5 419,1 399,2 294,8
20 500 359,3 528,0 502,1 367,4
24 600 671,3 680,4 952,1 703,1
900 lb PIPE FLANGES
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
3 80 14,06 14,51 14,51 14,06
4 100 24,04 23,13 24,49 24,04
5 125 37,65 39,01 39,46 37,65
6 150 49 49,9 51,26 49
8 200 78 84,82 89,36 86,18
10 250 111,1 131,6 131,50 124,7
130
ASME B16.5FLANGES6.12
WEIGHT OF FLANGES
2500 lb PIPE FLANGES
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
3 80 37,65 42,64 39,01 36,29
4 100 56,7 65,77 61,23 54,43
5 125 95,25 111,1 102,06 93
6 150 147,4 172,4 140 142,9
8 200 220 261 236 213,2
10 250 421,8 485 450 108,2
12 300 499 730 650 499
2500 lb PIPE FLANGES
N.B. APPROXIMATE WEIGHTS IN Kg
Inches MetricSlip-on
and Screwed
Weld Neck
Blind Lap Joint
1/2 15 3,18 3,18 3,18 3,18
3/4 20 3,63 3,63 3,63 3,63
1 25 4,99 5,44 4,99 4,99
1 1/4 32 7,26 7,71 7,71 7,26
1 1/2 40 9,98 11,34 10,43 9,98
2 50 17,24 19,05 17,69 16,78
2 1/2 65 24,94 23,59 25,40 24,04
131
132132
133
Content
7.1 Dimensions 134
7.2 Spectacle Blinds 138
7.3 Bleed/Dript Rings 142
7SPECTACLE BLINDS, SPADES AND SPACERS
134
ASME B16.48SPECTACLE BLINDS, SPADES AND SPACERS7.1
DIMENSIONS
PRESSURE CLASS 150
NPS
Outside Diameter
Inside Diameter
Center to End
ThicknessHandle Width
A B C t W
1/2 45 16 126 3 32
3/4 54 21 131 3 32
1 64 27 136 3 32
1 1/4 73 42 145 6,4 32
1 1/2 83 48 145 6,4 32
2 102 61 155 6,4 32
2 1/2 107 73 170 6,4 32
3 133 89 170 6,4 32
3 1/2 159 102 202 9,7 38
4 172 114 202 9,7 38
5 194 141 225 9,7 38
6 219 168 225 12,7 38
8 276 219 267 12,7 38
10 337 273 322 15,7 44
12 406 324 357 19,1 44
14 448 356 378 19,1 44
16 511 406 410 22,4 44
18 546 457 427 25,4 51
20 603 508 455 28,4 51
24 714 610 512 31,8 51
NOTE: Dimensions in mm. Spade handles shall be solid with no openings.
PRESSURE CLASS 300
NPS
Outside Diameter
Inside Diameter
Center to End
ThicknessHandle Width
A B C t W
1/2 51 16 129 6,4 32
3/4 64 21 136 6,4 32
1 70 27 139 6,4 32
1 1/4 79 42 150 6,4 32
1 1/2 92 48 150 6,4 32
2 108 61 158 9,7 32
2 1/2 127 73 177 9,7 32
3 146 89 177 9,7 32
3 1/2 162 102 205 12,7 38
4 178 114 205 12,7 38
5 213 141 240 15,7 38
6 248 168 240 15,7 38
8 305 219 281 22,4 38
10 359 273 333 25,4 44
12 419 324 363 28,4 44
14 483 356 395 31,8 44
16 536 406 422 38,1 44
18 594 457 450 41,1 51
20 651 508 480 44,5 51
24 772 610 540 50,8 51
AB
Wt
t
C
D
W
RING OR PADDLE SPACER
A
Wt
t
C
W
SPADE OR PADDLE BLANK
135
ASME B16.48 7.1
DIMENSIONS
PRESSURE CLASS 600
NPS
Outside Diameter
Inside Diameter
Center to End
ThicknessHandle Width
A B C t W
1/2 51 16 129 6,4 32
3/4 64 21 136 6,4 32
1 70 27 139 6,4 32
1 1/4 79 37 150 9,7 32
1 1/2 92 43 150 9,7 32
2 108 55 158 9,7 32
2 1/2 127 67 177 12,7 32
3 146 83 177 12,7 32
3 1/2 159 96 211 15,7 38
4 191 108 211 15,7 38
5 238 135 248 19,1 38
6 264 162 248 22,4 38
8 318 212 288 28,4 38
10 397 265 352 35,1 44
12 454 315 381 41,1 44
14 489 346 398 44,5 44
16 562 397 435 50,8 44
18 610 448 459 53,8 51
20 679 497 493 63,5 51
24 787 597 547 73,2 51
NOTE: Dimensions in mm. Spade handles shall be solid with no openings.
PRESSURE CLASS 900
NPS
Outside Diameter
Inside Diameter
Center to End
ThicknessHandle Width
A B C t W
1/2 60 16 134 6,4 32
3/4 67 21 137 6,4 32
1 76 27 142 6,4 32
1 1/4 86 37 151 9,7 32
1 1/2 95 43 151 9,7 32
2 140 55 174 12,7 32
2 1/2 162 67 186 12,7 32
3 165 83 186 15,7 32
4 203 108 217 19,1 38
5 244 135 259 22,4 38
6 286 162 259 25,4 38
8 356 212 307 35,1 38
10 432 265 370 41,1 44
12 495 315 401 47,8 44
14 518 346 412 53,8 44
16 572 397 440 60,5 44
18 635 448 471 66,5 51
20 696 497 501 73,2 51
24 835 597 571 88,9 51
AB
Wt
t
C
D
W
RING OR PADDLE SPACER
A
Wt
t
C
W
SPADE OR PADDLE BLANK
SPECTACLE BLINDS, SPADES AND SPACERS
136
ASME B16.487.1
DIMENSIONS
PRESSURE CLASS 1500
NPS
Outside Diameter
Inside Diameter
Center to End
ThicknessHandle Width
A B C t W
1/2 61 16 135 6,4 32
3/4 67 21 137 9,7 32
1 76 27 142 9,7 32
1 1/4 86 35 151 9,7 32
1 1/2 95 41 151 12,7 32
2 140 53 174 12,7 32
2 1/2 162 63 190 15,7 32
3 172 78 190 19,1 32
4 206 102 219 22,4 38
5 251 128 256 28,4 38
6 279 154 256 35,1 38
8 349 203 303 41,1 38
10 432 255 370 50,8 44
12 518 303 412 60,5 44
14 575 333 442 66,5 44
16 638 381 472 76,2 44
18 702 429 504 85,9 51
20 752 478 530 95,3 51
24 899 575 603 111,3 51
NOTE: Dimensions in mm. Spade handles shall be solid with no openings.
PRESSURE CLASS 2500
NPS
Outside Diameter
Inside Diameter
Center to End
ThicknessHandle Width
A B C t W
1/2 67 16 137 9,7 32
3/4 73 21 140 9,7 32
1 83 27 145 9,7 32
1 1/4 102 35 161 12,7 32
1 1/2 114 41 161 15,7 32
2 143 53 175 15,7 32
2 1/2 165 63 201 19,1 32
3 194 78 201 22,4 32
4 232 102 232 28,4 38
5 276 128 273 35,1 38
6 314 154 273 41,1 38
8 384 198 321 53,8 38
10 473 248 390 66,5 44
12 546 289 427 79,2 44
AB
Wt
t
C
D
W
RING OR PADDLE SPACER
A
Wt
t
C
W
SPADE OR PADDLE BLANK
SPECTACLE BLINDS, SPADES AND SPACERS
137
ASME B16.48 7.1
DIMENSIONS
AB
Wt
t
C
D
W
RING OR PADDLE SPACER
A
Wt
t
C
W
SPADE OR PADDLE BLANK
NOTE: 1. Dimensions in mm unless otherwise indicated2. Spade Handles shall be solid with no openings
GENERAL NOTES:1. Ring Spacer Handles shall have a single through indicator hole located near the end of
the handle. The hole diameter shall not be less than 12 mm2. Wt = Thickness of the handle should be minimum 6 mm, or equal to Thickness (t) is less
than 6 mm3. Spades and Ring Spacers should be made from a plate or forging specifi ation, approved
for use by ASME B31.1, of essentially the same chemical composition as the mating flanges and piping in olved
4. Spades and Ring Spacers according to ASME B16.48 may be used for installation between ASME B16.5 flange
5. Depending on a customer specifi ation, some dimensions may differ from what is definedon this page
6. Spades exceeding a weight that can be lifted by man, a hole at the top of the handle is made to give a lifting possibility. Design in accordance with customer specifi ations
SPECTACLE BLINDS, SPADES AND SPACERS
138
ASME B16.487.2
SPECTACLE BLINDS
PRESSURE CLASS 150
NPS
Outside Diameter
Inside Diameter
Center Line
ThicknessWeb
Width
A B C t W
1/2 45 16 60 3 38
3/4 54 21 70 3 38
1 64 27 80 3 38
1 1/4 73 42 90 6,4 38
1 1/2 83 48 100 6,4 38
2 102 61 120 6,4 51
2 1/2 107 73 140 6,4 51
3 133 89 150 6,4 64
3 1/2 159 102 175 9,7 64
4 172 114 190 9,7 64
5 194 141 215 9,7 76
6 219 168 240 12,7 76
8 276 219 300 12,7 76
10 337 273 360 15,7 102
12 406 324 430 19,1 102
14 448 356 475 19,1 108
16 511 406 460 22,4 108
18 546 457 580 25,4 114
20 603 508 635 28,4 121
24 714 610 750 31,8 140
NOTE: Dimensions in mm
PRESSURE CLASS 300
NPS
Outside Diameter
Inside Diameter
Center Line
ThicknessWeb
Width
A B C t W
1/2 51 16 65 6,4 38
3/4 64 21 80 6,4 38
1 70 27 90 6,4 38
1 1/4 79 42 100 6,4 38
1 1/2 92 48 115 6,4 38
2 108 61 125 9,7 51
2 1/2 127 73 150 9,7 51
3 146 89 170 9,7 64
3 1/2 162 102 185 12,7 64
4 178 114 200 12,7 64
5 213 141 235 15,7 76
6 248 168 270 15,7 76
8 305 219 330 22,4 76
10 359 273 385 25,4 102
12 419 324 450 28,4 102
14 483 356 515 31,8 108
16 536 406 570 38,1 108
18 594 457 630 41,1 114
20 651 508 685 44,5 121
24 772 610 810 50,8 140
RF height
A A
B
Wt
t
C
D
W
NOTE:1. ASME B16.48: The gasket seating surface finish and dimensions or raised face line
blanks shall be in accordance with ASME B16.5. A raised face may be specified at theoption of the purchaser.
2. A Raised Face would add machining time and complexity
SPECTACLE BLINDS, SPADES AND SPACERS
139
ASME B16.48 7.2
SPECTACLE BLINDS
PRESSURE CLASS 600
NPS
Outside Diameter
Inside Diameter
Center Line
ThicknessWeb
Width
A B C t W
1/2 51 16 65 6,4 38
3/4 64 21 80 6,4 38
1 70 27 90 6,4 57
1 1/4 79 37 100 9,7 57
1 1/2 92 43 115 9,7 67
2 108 55 125 9,7 57
2 1/2 127 67 150 12,7 67
3 146 83 170 12,7 67
3 1/2 159 96 185 15,7 76
4 191 108 215 15,7 76
5 238 135 265 19,1 86
6 264 162 290 22,4 86
8 318 212 350 28,4 95
10 397 265 430 35,1 105
12 454 315 490 41,1 105
14 489 346 525 44,5 114
16 562 397 605 50,8 124
18 610 448 655 53,8 133
20 679 497 725 63,5 133
24 787 597 840 73,2 152
NOTE: Dimensions in mm
PRESSURE CLASS 900
NPS
Outside Diameter
Inside Diameter
Center Line
ThicknessWeb
Width
A B C t W
1/2 60 16 80 6,4 38
3/4 67 21 90 6,4 41
1 76 27 100 6,4 57
1 1/4 86 37 110 9,7 57
1 1/2 95 43 125 9,7 67
2 140 55 165 12,7 57
2 1/2 162 67 190 12,7 67
3 165 83 190 15,7 67
4 203 108 235 19,1 76
5 244 135 280 22,4 86
6 286 162 320 25,4 86
8 356 212 395 35,1 95
10 432 265 470 41,1 105
12 495 315 535 47,8 105
14 518 346 560 53,8 114
16 572 397 615 60,5 124
18 635 448 685 66,5 133
20 696 497 750 73,2 133
24 835 597 900 88,9 152
A A
B
Wt
t
C
D
W
SPECTACLE BLINDS, SPADES AND SPACERS
140
ASME B16.487.2
SPECTACLE BLINDS
PRESSURE CLASS 1500
NPS
Outside Diameter
Inside Diameter
Center Line
ThicknessWeb
Width
A B C t W
1/2 61 16 80 6,4 38
3/4 67 21 90 9,7 41
1 76 27 100 9,7 64
1 1/4 86 35 110 9,7 64
1 1/2 95 41 125 12,7 70
2 140 53 165 12,7 70
2 1/2 162 63 190 15,7 76
3 172 78 205 19,1 76
4 206 102 240 22,4 89
5 251 128 290 28,4 89
6 279 154 320 35,1 89
8 349 203 395 41,1 102
10 432 255 480 50,8 114
12 518 303 570 60,5 114
14 575 333 635 66,5 127
16 638 381 705 76,2 133
18 702 429 775 85,9 146
20 752 478 830 95,3 152
24 899 575 990 111,3 178
PRESSURE CLASS 2500
NPS
Outside Diameter
Inside Diameter
Center Line
ThicknessWeb
Width
A B C t W
1/2 67 16 90 9,7 38
3/4 73 21 95 9,7 41
1 83 27 110 9,7 64
1 1/4 102 35 130 12,7 64
1 1/2 114 41 145 15,7 70
2 143 53 170 15,7 70
2 1/2 165 63 195 19,1 76
3 194 78 230 22,4 76
4 232 102 275 28,4 89
5 276 128 325 35,1 89
6 314 154 370 41,1 89
8 384 198 440 53,8 102
10 473 248 540 66,5 114
12 546 289 620 79,2 114
A A
B
Wt
t
C
D
W
NOTES:1. Dimensions in mm2. D = Hole size (where required) should be the same as the flange bolt ho e. Dimensions have been round off upwards3. Wt = Thickness of the web (or tie bar) should be minimum 6 mm, or equal to Thickness (t) if less than 6 mm4. Spectacle Blinds should be made from a plate or forging specifi ation, approved for use by ASME B31.3, of essentially
the same chemical composition as the mating flanges and piping in olved5. Spectacle Blinds according to ASME B16.48 may be used for installation between ASME B16.5 flange6. Depending on customer specifi ation, some dimensions may differ from what is defined on this pag
SPECTACLE BLINDS, SPADES AND SPACERS
141
ASME B16.48 7.2
SPECTACLE BLINDS
RF height
NOTES:1. ASME B16.48: The gasket seating surface finish and dimensions or raised face line blanks shall be in accordance
with ASME B16.5. A raised face may be specified at the option of the pu chaser. 2. A Raised Face would add machining time and complexity
SPECTACLE BLINDS, SPADES AND SPACERS
142
ASME 3.13, B16.5, B16.207.3
DIMENSIONS BLEED/DRIP RINGS ̄NPS 1 TO NPS 12
PRESSURE CLASS 1500
NPS IDPressure Class
150 300 600 900 1500
1 28,6 63,5 69,9 69,9 76,2 76,2
1 1/2 41,3 82,6 92,1 92,1 95,3 95,3
2 54 101,6 108 108 139,7 139,7
2 1/2 63,5 120,7 127 127 161,9 161,9
3 79,4 133,4 146,1 146,1 165,1 171,5
4 104,8 171,5 177,8 190,5 203,2 206,4
6 155,6 219,1 247,7 263,5 285,8 279,4
8 203,2 276,2 304,8 317,5 355,6 349,3
10 257,2 336,6 358,8 396,9 431,8 431,8
12 304,8 406,4 419,1 450,9 492,1 514,4
C
X
OD ID
NOTES:1. Dimensions in mm unless otherwise indicated2. C - 1/2 inch or 3/4 inch threaded or socket weld taps are standard. Multiple taps can be provided but must be
orientated by customer. Thickness of ring may be affected if larger taps are required3. X - Depending on the inside diameter of pipe or fittin4. Standard finish of gas et surface shall be machined to 125-250 Serrated finish. Other sur ace finish mu t be
specified by cu tomer
SPECTACLE BLINDS, SPADES AND SPACERS
A bleed/drip ring is a ring section with one or more radial pipe connections designed to fit bet een standard flanges within the bolt ci cle, using conventional gasket material. The ring normally comes with 1/2 inch socket weld or 3/4 inch tapped for connecting with valves and instruments. The face of the ring can also be made to matched with any flange type, and has dif erent sizes based on the ASME flange ating of the process piping.
Bleed Rings can provide a beneficial way of d aining piping, taking samples, attaching instruments or even bleeding of a valve. They can also be used with a valve and/or blind flange, this al ows you to reduce and dispose of the pressure for your valve before you remove the flange. This is usual y done with a replacement for a leaky valve.
The bleed ring can come in any material or size, and is designed for connecting valves and instruments. The face of the bleed ring can be manufactured to match with any flange type. The tandard sizes for a bleed ring are NPS 1 to NPS 24 and ASME Pressure Classes 150 through 1500. It comes in many different materials such as carbon steel, stainless steel etc.
143
144
145
Content
8.1 Type 6B Flanges 146
8.2 Type 6BX Flanges 148
8FLANGES Š API 6A
146
XREFERENCEDIMENSION
BREAKSHARP
CORNERB K
MINBC OD
C MAXX 45°
0.12 MINRADIUS
0.12 MINRADIUS
C MAX X 45°OMIN
T+ 0.12
-0
FLANGE SECTIONINTEGRAL FLANGE
RING GROOEMUST BE CONCENTRICWITH BORE WITIN0.010 TOTAL INDICATORRUNOUT
BOLT HOLE ENTERLINELOCATED WITHIN 0.03OF THEORETIAL a:c:AND EQUAL SPACING
DETAIL A SEE DETAIL A
TOP VIEW
LN
HL
JL
LLLH
TLCL
API 6A ̄TYPE 6BFLANGES8.1
API 6A ̄TYPE 6B FLANGES
THREADED FLANGE
WELD NECK LINE PIPE FLANGE
147
FLANGESAPI A ̄TYPE 6B 8.1
API 6A ̄TYPE 6B FLANGES
R2
E
F
P23°
TYPE 6B WELD NECK FLANGES - 5000 PSI
Weld neck, Threaded and Integral flanges a e available in 2000, 3000 and 5000 psi rating
Nom-inal size
Nom. bore
Max bore
OD flang
Raised face OD
Total thickn.
Basic thickn.
Large HUB diam.
Small HUB diam.
HUB length
OD bolt
circle
No. of
bolts
Bolt diam.
Bolt hole
diam.
Stud bolt
length
Ring number
OD of groove
Width of
groove
Depth of
groove
(Inch) JL OD K T Q X HL LN BC (Inch) Lssb R/RX P F E
2 1/16 52 43,7 215 124 46,1 38,1 104,8 60,3 109,5 165,1 8 7/8 26 155 24 95,25 11,91 7,87
2 9/16 65 54,9 245 137 49,3 43,1 123,9 73 112,7 190,5 8 1 30 165 27 107,95 11,91 7,87
3 1/8 78 67,3 270 168 55,6 47,7 133,3 88,9 125,4 203,2 8 1 1/8 33 185 35 136,53 11,91 7,87
4 1/16 103 88,1 310 194 62 54 162 114,3 131,8 241,3 8 1 1/4 36 205 39 161,93 11,91 7,87
5 1/8 130 110,2 375 228 81 73,1 196,8 141,3 163,5 292,1 8 1 1/2 42 255 44 193,68 11,91 7,87
7 1/16 178 132,6 395 249 92,1 82,6 228 168,3 181,0 317,5 12 1 3/8 39 270 46 211,14 13,49 9,65
9 228 173,7 485 317 103,2 92,1 292 219,1 223,8 393,7 12 1 5/8 45 305 50 269,88 16,66 11,18
11 279 216,7 585 371 119,1 108 368 273,1 265,1 482,6 12 1 7/8 52 350 54 323,85 16,66 11,18
NOTE: All dimensions except NPS and bolt diameter in millimeters
TOLERANCES:
OD 2 1/16 to 5 1/8 +/- 2 mmOD 7 1/16 to 11 +/- 3 mmLN +/-1.6 mmHL 2 1/16 to 5 1/8 +2.3/-0.8 mmHL 7 1/16 to 11 +4.0/-0.8 mmT +3/-0 mmK /-0 mmQ /-0 mm
Bolt holes 2 1/16 to 7 1/16 +2/-0.5 mmBolt holes 9 to 11 +3/-0.5 mm
P +/-0.13 mmF +/-0.20 mmE +0.5/-0 mm
All other dimension - as X.X +/-0.5 mmAll other dimension - as X.XX +/-0.1 mm
GROOVE
148
API 6A ̄TYPE 6BXFLANGES8.1
API 6A ̄TYPE 6BX FLANGES
API 6A - TYPE 6BX FLANGES
Weld neck, Blind and Test flanges a e available in 10.000, 15.000 and 20.000psi rating.
Nominal size
Nom. bore
Max bore
OD flang
Raised face OD
Total thickn.
Large HUB diam.
Small HUB diam.
HUB length
OD bolt
circle
No. of bolts
Bolt diam.
Bolt hole
diam.
Stud bolt
length
Ring number
OD of groove
Width of
groove
Depth of
groove
(Inch) B B OD K T J1 J2 J3 BC (Inch) Lssb BX G N E
15.000 psi
1 13/16 46 46,6 185 105 42,1 88,9 65,1 48,4 146,0 8 3/4 24 130 151 77,79 11,84 5,56
2 1/16 52 53,2 200 111 44,1 100,0 74,6 51,6 158,8 8 3/4 24 130 152 86,23 12,65 5,95
2 9/16 65 65,9 230 132 51,2 120,7 92,1 57,2 184,2 8 7/8 26 150 153 102,77 14,07 6,75
3 1/16 78 78,6 270 152 58,4 142,1 111,1 63,5 215,9 8 1 30 170 154 119,00 15,39 7,54
4 1/16 103 104,0 315 185 70,3 182,6 146,1 73,0 258,8 8 1 1/8 32 200 155 150,62 17,73 8,33
5 1/8 130 131,0 355 221 79,4 223,8 182,6 81,0 300,0 12 1 1/8 32 220 169 176,66 16,92 9,53
7 1/16 179 180,2 480 302 103,2 301,6 254,0 95,2 403,2 12 1 1/2 42 290 156 241,83 23,39 11,11
9 228 229,4 550 359 123,9 374,7 327,1 93,7 476,2 16 1 1/2 42 330 157 299,06 26,39 12,7
11 279 280,2 655 429 141,3 450,9 400,1 103,2 565,2 16 1 3/4 48 380 158 357,23 29,18 14,29
13 5/8 346 346,9 770 518 168,3 552,5 495,3 114,3 673,1 20 1 7/8 52 440 159 432,64 32,49 15,88
16 3/4 425 426,2 870 576 168,3 655,6 601,7 76,2 776,3 24 1 7/8 52 440 162 478,33 17,91 8,33
15.000 psi
1 13/16 46 46,8 210 106 45,3 97,6 71,4 47,6 160,3 8 7/8 26 140 151 77,79 11,84 5,56
2 1/16 52 53,2 220 114 50,0 111,1 82,6 54,0 174,6 8 7/8 26 150 152 86,23 12,65 5,95
2 9/16 65 65,9 255 133 57,1 128,6 100,0 57,2 200,0 8 1 30 170 153 102,77 14,07 6,75
3 1/16 78 78,6 285 154 64,3 154,0 122,2 63,5 230,2 8 1 1/8 32 190 154 119,00 15,39 7,54
4 1/16 103 104,0 360 194 78,6 195,3 158,8 73,0 290,5 8 1 3/8 40 230 155 150,62 17,73 8,33
5 1/8 130 131,0 420 225 98,5 244,5 200,0 81,8 342,9 12 1 1/2 42 292 169 176,66 16,92 9,53
7 1/16 179 180,2 505 305 119,1 325,4 276,2 92,1 428,6 16 1 1/2 42 320 156 241,83 23,39 11,11
20.000 psi
1 13/16 46 46,8 255 117 63,5 133,4 109,5 49,2 203,2 8 1 29 185 151 77,79 11,84 5,56
2 1/16 52 53,2 285 132 71,5 154,0 127,0 52,4 230,2 8 1 1/8 32 205 152 86,23 12,65 5,95
2 9/16 65 65,9 325 151 79,4 173,0 144,5 58,7 261,9 8 1 1/4 35 230 153 102,77 14,07 6,75
3 1/16 78 78,6 355 171 85,8 192,1 160,3 63,5 287,3 8 1 3/8 38 250 154 119,00 15,39 7,54
4 1/16 103 104,0 445 219 106,4 242,9 206,4 73,0 357,2 8 1 3/4 48 310 155 150,62 17,73 8,33
7 1/16 179 180,2 655 352 165,1 385,8 338,1 96,8 554,0 16 2 54 440 156 241,83 23,39 11,11
NOTE: All dimensions except NPS and bolt diameter in millimeters
149
FLANGESAPI A ̄TYPE 6BX 8.1
API 6A ̄TYPE 6BX FLANGES
BREAKSHARP
CORNER
B
J2 MIN
+0-0.12
J1
K ± .063
BCOD
C MAX 45°
0.12 MIN RADIUS
C MAX 45°
Q* max = E (Table 10.18)Q* min = 0.12”Q* may be mittedon ˜anges
R
T + 0.12-0
- 1/4” MIN
3JMINIMUM
Q*
FLANGE SECTION
RING GROOEMUST BE CONCENTRICWITH BORE WITIN 0.010 TOTAL INDICATORRUNOUT
BOLT HOLE ENTERLINELOCATED WITHIN 0.03OF THEORETIAL a:c:AND EQUAL SPACING
DETAIL A
DETAIL B
SEE DETAIL A
TOP VIEW
RE
N
G
BREAK SHARP CORNER
23°
132
x 45° max116
TOLERANCES:
OD 1 13/16 to 5 1/8 +/- 2 mmOD 7 1/16 to 16 3/4 +/- 3 mmJ1 +0/-3 mmJ2 /-0 mmJ3 /-0 mmT +3/-0 mmK +/-1.6 mm
Bolt holes 1 13/16 to 9 +2/-0.5 mmBolt holes 11 to 16 3/4 +3/-0.5 mm
G +0.1/-0 mmN +0.1/-0 mmE +0.5/-0 mm
All other dimension - as X.X +/-0.5 mmAll other dimension - as X.XX +/-0.1 mm
150
151
Content
9.1 Welding Necks and Blinds 152
9.2 Ring Joint Facings and Tolerances 157
9FLANGES Š MSS SPŠ44
152
Y
C
1.6 = 1/16”
1
2
HB
X
RJ
C
1.6 = 1/16”O
MSS SP¯44FLANGES9.1
WELDING NECKS AND BLINDS ²26” ̄60”³ 150 LB.
Flange Hub Drilling template
Nominal Pipe Size
O mm Inch
B mm Inch
C mm Inch
Y mm Inch
H mm Inch
X mm Inch
Raised face X mm
Inch
Number of bolt holes
Dia. Of bolt holes
Dia. Of bolt circle
Welding Neck
Blind
26"869,9 34 1/4
68,3 2 11/16
120,6 4 3/4
660,4 26
676,3 26 5/8
749,3 29 1/2
2434,9 1 3/8
806,4 31 3/4
147 324
306 675
28"927,1 36 1/2
71,4 2 13/16
125,4 4 15/16
711,2 28
727,1 28 5/8
800,1 31 1/2
2834,9 1 3/8
863,6 34
163 360
363 800
30"984,2 38 3/4
74,6 2 15/16
136,5 5 3/8
762 30
781 30 3/4
857,3 33 3/4
2834,9 1 3/8
914,4 36
190 419
430 948
32"1.060,4 41 3/4
81 3 3/16
144,5 5 11/16
812,8 32
831,8 32 3/4
914,4 36
2841,3 1 5/8
977,8 38 1/2
238 525
537 1.184
34"1.111,2 43 3/4
82,5 3 1/4
149,2 5 7/8
863,6 34
882,6 34 3/4
965,2 38
3241,3 1 5/8
1.028,7 40 1/2
255 562
600 1.323
36"1.168,4
4690,5
3 9/16157,2 6 3/16
914,4 36
933,4 36 3/4
1.022,3 40 1/4
3241,3 1 5/8
1.085,85 42 3/4
302 665
730 1.609
38"1.238,2 48 3/4
To be87,3
3 7/16157,2 6 3/16
965,2 38
990,6 39
173,2 42 1/4
3241,3 1 5/8
1.149,4 45 1/4
342 754
792 1.748
40"1.289 50 3/4
speci-fie
90,5 3 9/16
163,5 6 7/16
1.016 40
1.041,4 41
1.124 44 1/4
3641,3 1 5/8
1.200,1 47 1/4
366 807
893 1.968
42"1.346,2
53by
96,8 3 13/16
171,5 6 3/4
1.066,8 42
1.092,2 43
1.193,8 47
3641,3 1 5/8
1.257,3 49 1/2
419 924
1.044 2.303
44"1.403,4 55 1/4
pur-chaser
101,6 4
177,8 7
1.117,6 44
1.143 45
1.244,6 49
4041,3 1 5/8
1.314,5 51 3/4
459 1.012
1.190 2.623
46"1.454,2 57 1/4
103,2 4 1/16
185,7 7 3/16
1.168,4 46
1.197 47 1/8
1.295,4 51
4041,3 1 5/8
1.365,2 53 3/4
500 1.102
1.299 2.864
48"1.511,3 59 1/2
108 4 1/2
192,1 7 9/16
1.219,2 48
1.247,8 49 1/8
1.358,9 53 1/2
4441,3 1 5/8
1.422,4 56
552 1.217
1.470 3.240
50"1.568,5 61 3/4
111,1 4 3/8
203,2 8
1.270 50
1.301,8 51 1/4
1.409,7 55 1/2
4447,6 1 7/8
1.479,5 58 1/4
592 1.305
1.615 3.560
52"1.625,6
64115,9 4 9/16
209,6 8 1/4
1.320,8 52
1.352,6 53 1/4
1.460,5 57 1/2
4447,6 1 7/8
1.536,7 60 1/2
660 1.455
1.817 4.006
54"1.682,8 66 1/4
120,6 4 3/4
215,9 8 1/2
1.371,6 54
1.403,4 55 1/4
1.511,3 59 1/2
4447,6 1 7/8
1.593,9 62 3/4
726 1.600
2.031 4.478
56"1.746,1 68 3/4
123,8 4 7/8
228,6 9
1.422,4 56
1.457,3 57 3/8
1.574,8 62
4847,6 1 7/8
1.651 65
805 1.775
2.244 4.947
58"1.803,4
71128,6 5 1/16
235 9 1/4
1.473,2 58
1.508,1 59 3/8
1.625,6 64
4847,6 1 7/8
1.708,2 67 1/4
884 1.949
2.491 5.492
60"1.854,2
73131,8 5 3/16
239,7 9 7/18
1.524 60
1.559 61 3/8
1.676,4 66
5247,6 1 7/8
1.759 69 1/4
930 2.050
2.697 5.946
153
FLANGESMSS SP¯44 9.1
Y
C
1.6 = 1/16”
1
2
HB
X
RJ
C
1.6 = 1/16”O
WELDING NECKS AND BLINDS ²26” ̄60”³ 300 LB.
Flange Hub Drilling template Approx. weight Kg. Pounds
Nominal Pipe Size
O mm Inch
B mm Inch
C1 mm Inch
C2 mm Inch
Y mm Inch
H mm Inch
Raised face X mm Inch
R mm Inch
Number of bolt holes
Dia. Of bolt holes
Dia. Of bolt circle
Welding Neck
Blind
26"971,5 38 1/4
/884,1
3 3/16184,1 7 1/4
660,4 26
720,7 28 3/4
749,3 29 1/2
2844,5 1 3/4
876,3 34 1/2
275 606
460 1.014
28"1.035 40 3/4
85,7 3 3/8
90,5 3 9/16
196,8 7 3/4
711,2 28
774,7 30 1/2
800,1 31 1/2
2844,5 1 3/4
939,8 37
340 750
566 1.248
30"1.092,2
4392,1 3 5/8
95,2 3 3/4
209,5 8 1/4
762 30
827,1 32 9/16
857,3 33 3/4
2847,6 1 7/8
997 39 1/4
389 858
663 1.462
32"1.149,4 45 1/4
98,4 3 7/8
100 3 15/16
222,3 8 3/4
812,8 32
881,1 34 11/16
914,4 36
2850,8
21.054,1 41 1/2
438 966
770 1.697
34"1.206,5 47 1/2
101 4
104,8 4 1/8
231,8 9 1/8
863,6 34
936,6 36 7/8
965,2 38
2850,8
21.104,9 43 1/2
498 1.098
894 1.971
36"1.270
50104,8 4 1/8
111,1 4 3/8
241,3 9 1/2
914,4 36
990,6 39
1.022,3 40 1/4
2854
2 1/81.168,4
46563
1.2411.040 2.294
38"1.168,4
46To be
108 4 1/4
108 4 1/4
181 7 1/8
965,2 38
993,8 39 1/8
1.028,7 40 1/2
2841,3 1 5/8
1.092,2 43
307 677
872 1.922
40"1.238,3 48 3/4
speci-fie
114 4 1/2
114,3 4 1/2
193,7 7 5/8
1.016 40
1.047,1 41 1/4
1.085,9 42 3/4
3244,5 1 3/4
1.155,7 45 1/2
372 820
1.035 2.282
42"1.289 50 3/4
by119,1
4 11/16119,1
4 11/16200
7 7/81.066,8
421.098,5 43 1/4
1.136,7 44 3/4
2844,5 1 3/4
1.206,5 47 1/2
409 902
1.173 2.587
44"1.352,5 53 1/4
pur-chaser
123 4 7/8
123,8 4 7/8
206,4 8 1/8
1.117,6 44
1.149,1 45 1/4
1.193,8 47
3247,6 1 7/8
1.263,7 49 3/4
464 1.023
1.340 2.954
46"1.416,1 55 3/4
128,6 5 1/16
128,6 5 1/16
215,9 8 1/2
1.168,4 46
1.203,3 47 3/8
1.244,6 49
3250,8
21.320,8
52544
1.1991.600 3.527
48"1.466,8 57 3/4
133 5 1/4
133,4 5 1/4
223,8 8 13/16
1.219,2 48
1.254 49 3/8
1.301,8 51 1/4
3250,8
21.371,6
54567
1.25017003.748
50"1.530,3 60 1/4
139 5 1/2
139,7 5 1/2
231,8 9 1/8
1.270 50
1.304,9 51 3/8
1.358,9 53 1/2
2854
2 1/81.428,8 56 1/4
643 1.417
1.936 4.268
52"1.581 62 1/4
144,5 5 11/16
144,5 5 11/16
238,1 9 3/8
1.320,8 52
1.355,7 53 3/8
1.409,7 55 1/2
3254
2 1/81.479,5 58 1/4
694 1.530
2.143 4.724
54"1.657,4 65 1/4
152,4 6
152,4 6
252,4 9 15/16
1.371,6 54
1.409 55 1/2
1.466,8 57 3/4
3260,3 2 1/8
1.549,4 61
832 1.834
2.486 5.480
56"1.708,2 67 1/4
154 6 1/16
154 6 1/16
260,4 10 1/4
1.422,4 56
1.463 57 5/8
1.517,7 59 3/4
3260,3 2 1/8
1.600,2 63
882 1.944
2.674 5.895
58"1.759 69 1/4
158,7 6 1/4
158,7 6 1/4
266,7 10 1/2
1.473,2 58
1.514 59 5/8
1.574,8 62
3260,3 2 1/8
1.651 65
928 2.046
2.913 6.422
60"1.809,8 71 1/4
163,5 6 7/16
163,5 6 7/16
273,1 10 3/4
1.524 60
1.565 61 5/8
1.625,6 64
2860,3 2 1/8
1.701,8 67
989 2.180
3.184 7.019
154
MSS SP¯44FLANGES9.1
WELDING NECKS AND BLINDS ²26” ̄60”³ 400 LB.
Flange Hub Drilling template Approx. weight Kg. Pounds
Nominal Pipe Size
O mm Inch
B mm Inch
C1 mm Inch
C2 mm Inch
Y mm Inch
H mm Inch
Raised face X mm Inch
R mm Inch
Number of bolt holes
Dia. Of bolt holes
Dia. Of bolt circle
Welding Neck
Blind
26"971,5 38 1/4
88,9 3 1/2
98,4 3 7/8
193,6 7 5/8
660,4 26
727,1 28 5/8
749,3 29 1/2
2847,6 1 7/8
876,3 34 1/2
304 670
534 1.177
28"1.035,1 40 3/4
95,3 3 3/4
104,8 4 1/8
206,4 8 1/8
711,2 28
782,6 32 13/16
800,1 31 1/2
2850,8
2939,8
37362 798
645 1.423
30"1.091,2
43101,6
4111,1 4 3/8
219,1 8 5/8
762 30
836,6 32 15/16
857,3 33 3/4
2854
2 1/8997
39 1/4415 915
760 1.675
32"1.149,4 45 1/4
108 4 1/4
115,9 4 9/16
231,8 9 1/8
812,8 32
889 35
914,4 36
2854
2 1/81.054,1 41 1/2
478 1.054
885 1.951
34"1.206,5 47 1/2
111,1 4 3/8
122,2 4 13/16
241,3 9 1/2
863,6 34
944,5 37 3/16
865,2 38
2854
2 1/81.104,9 43 1/2
538 1.186
1.035 2.282
36"1.270
50114,3 4 1/2
128,6 5 1/16
250,8 9 7/8
914,4 36
1.000,1 39 3/8
1.022,3 40 1/4
3254
2 1/81.168,4
46604
1.3311.205 2.656
38"1.206,5 47 1/2
To be123,8 4 7/8
123,8 4 7/8
206,4 8 1/8
965,2 38
1.003,3 39 1/2
1.035,1 40 3/4
3247,6 1 7/8
1.117,6 44
406 895
1.055 2.326
40"1.270
50speci-
fie130,2 5 1/8
130,2 5 1/8
215,9 8 1/2
1.016 40
1.054,3 41 1/2
1.092,2 43
3250,8
21.225,5 48 1/4
513 1.131
1.366 3.011
42"1.320,8
52by
133,3 5 1/4
133,3 5 1/4
223,8 8 13/16
1.066,8 42
1.108,1 43 5/8
1.143 45
3250,8
21.225,5 48 1/4
513 1.131
1.366 3.011
44"1.384,3 54 1/2
pur-chaser
139,7 5 1/2
139,7 5 1/2
233,3 9 3/16
1.117,6 44
1.158,9 45 5/8
1.200,1 47 1/4
3254
2 1/81.282,7 50 1/2
586 1.292
1.569 3.459
46"1.441,5 56 3/4
146,1 5 3/4
146,1 5 3/4
244,5 9 5/8
1.168,4 46
1.212,9 47 3/4
1.257,3 49 1/2
3654
2 1/81.339,9 52 3/4
648 1.429
1.776 3.915
48"1.511,3 59 1/2
152,4 6
152,4 6
257,2 10 1/8
1.219,2 48
1.266,8 49 7/8
1.308,1 51 1/2
2860,3 2 3/8
1.403,4 55 1/4
768 1.693
2.043 4.504
50"1.568,5 61 3/4
157,2 6 3/16
158,8 6 1/4
268,3 10 9/16
1.270 50
1.320,8 52
1.362,1 53 5/8
3260,3 2 3/8
1.460,5 57 1/2
832 1.834
2.294 5.057
52"1.619,3 63 3/4
161,9 6 3/8
163,5 6 7/16
276,2 10 7/8
1.320,8 52
1.371,6 54
1.412,9 55 5/8
3260,3 2 3/8
1.511,3 59 1/2
897 1.977
2.500 5.511
54"1.701,8
67169,8
6 11/16171,5 6 3/4
288,9 11 3/8
1.371,6 54
1.425,6 56 1/8
1.470 57 7/8
2866,7 2 5/8
1.581,2 62 1/4
1.086 2.394
2.900 6.393
56"1.752,6
69174,6 6 7/8
176,2 6 15/16
298,5 11 3/4
1.422,4 56
1.479,5 58 1/4
1.527,2 60 1/8
3266,7 2 5/8
1.632 64 1/4
1.139 2.511
3.174 6.997
58"1.803,4
71177,8
7181
7 1/8306,4
12 1/161.473,2
581.530,4 60 1/4
1.578 62 1/8
3266,7 2 5/8
1.632 64 1/4
1.208 2.663
3.462 7.632
60"1.886 74 1/4
185,7 7 5/16
188,9 7 7/16
319,5 12 9/16
1.524 60
1.584,3 62 3/8
1.635,1 64 3/8
3273
2 7/81.752,6
691.408 3.105
3.940 8.687
Y
C
1.6 = 1/16”
1
2
HB
X
RJ
C
1.6 = 1/16”O
155
FLANGESMSS SP¯44 9.1
WELDING NECKS AND BLINDS ²26” ̄60”³ 600 LB.
Flange Hub Drilling template Approx. weight Kg. Pounds
Nominal Pipe Size
O mm Inch
B mm Inch
C1 mm Inch
C2 mm Inch
Y mm Inch
H mm Inch
Raised face X mm Inch
R mm Inch
Number of bolt holes
Dia. Of bolt holes
Dia. Of bolt circle
Welding Neck
Blind
26"1.016
40108
4 1/4125,4
4 15/16222,3 8 3/4
660,4 26
747,7 29 7/16
749,3 29 1/2
2850,8
2914,4
36427 941
740 1,631
28"1.073,2 42 1/4
111,1 4 3/8
131,7 5 3/16
235 9 1/4
711,2 28
803,3 31 5/8
800,1 31 1/2
2854
2 1/8965,2
38479
1,056869
1,916
30"1.130,3 44 1/2
114,3 4 1/2
139,7 5 1/2
247,7 9 3/4
762 30
862 33 15/16
857,2 33 3/4
2854
2 1/81.022,4 40 1/4
545 1,201
1.030 2,271
32"1.193,8
47117,5 4 5/8
147,6 5 13/16
260,3 10 1/4
812,8 32
917,6 36 1/8
914,4 36
2860,3 2 3/8
1.079,5 42 1/2
610 1,345
1.204 2,654
34"1.244,6
49120,6 4 3/4
154 6 1/16
269,8 10 3/5
863,6 34
970 38 3/16
965,2 38
2860,3 2 3/8
1.130,3 44 1/2
666 1,468
1.371 3,023
36"1.314,5 51 3/4
123,8 4 7/8
161,9 6 3/8
282,6 11 1/8
914,4 36
1.031,9 40 5/8
1.022,3 40 1/4
2866,7 2 5/8
1.193,8 47
755 1,664
1.600 3,527
38"1.270
50To be
152,4 6
155,6 6 1/8
254 10
965,2 38
1.022,4 40 1/4
1.054,1 41 1/2
2860,3 2 3/8
1.162,1 45 3/4
640 1,411
1.447 3,190
40"1.320,8
52speci-
fie158,8 6 1/4
161,9 6 3/8
263,5 10 3/8
1.016 40
1.073,2 42 1/2
1.111,3 43 3/4
3260,3 2 3/8
1.212,9 47 3/4
683 1,506
1.620 3,571
42"1.403 55 1/4
by168,3 6 5/8
171,5 6 3/4
279,4 11
1.066,8 42
1.127,8 44 3/8
1.168,3 46
2866,7 2 5/8
1.282,7 50 1/2
754 1,662
1.948 4,294
44"1.454,2 57 1/4
pur-chaser
173,3 6 13/16
177,8 7
288,9 11 3/8
1.117,6 44
1.181,1 46 1/2
1.225,5 48 1/4
3266,7 2 5/8
1.333,5 52 1/2
903 1,990
2.100 4,630
46"1.511,3 59 1/2
179,4 7 1/16
185,7 7 5/16
300 11 13/16
1.168,4 46
1.235,1 48 5/8
1.276,4 50 1/4
3266,7 2 5/8
1.390,7 54 3/4
1.054 2,323
2.450 5,401
48"1.593,9 62 1/4
188,9 7 7/16
195,3 7 11/16
315,9 12 7/16
1.219,2 48
1.289,1 50 3/4
1.333,5 52 1/2
3273
2 7/81.460,5 57 1/2
1.200 2,645
2.850 6,283
50"1.670,1 65 3/4
196,9 7 3/4
203,2 8
328,6 12 15/16
1.270 50
1.343 52 7/8
1.384,3 54 1/2
2879,4 3 1/8
1.524 60
1.363 3,005
3.233 7,127
52"1.720,9 67 3/4
203,2 8
209,55 8 1/4
336,5 13 1/4
1.320,8 52
1.393,8 54 7/8
1.435,1 56 1/2
3279,4 3 1/8
1.574,8 62
1.466 3,232
3.570 7,870
54"1.778
70209,5 8 1/4
217,5 8 9/16
349,2 13 3/4
1.371,6 54
1.447,8 57
1.492,3 58 3/4
3279,4 3 1/8
1.632 64 1/4
1.605 3,538
3.968 8,747
56"1.854,2
73217,5 8 9/16
225,4 8 7/8
362 14 1/4
1.422,4 59
1.501,8 59 1/8
1.543,1 60 3/4
3285,7 3 3/8
1.695,5 66 3/4
1.709 3,767
4.450 9,810
58"1.905
75222,3 8 3/4
231,8 9 1/8
369,9 14 9/15
1.473,2 58
1.552,6 61 1/8
1.600,2 63
3285,7 3 3/8
1.746,3 68 3/4
1.916 4,224
4.850 10,692
60"1.993,9 78 1/2
233,3 9 3/16
242,9 9 9/16
389 15 5/16
1.524 60
1.609,7 63 3/8
1.657,3 65 1/4
2892,1 3 5/8
1.822,5 71 3/4
2.300 5,070
5.588 12,319
Y
C
1.6 = 1/16”
1
2
HB
X
RJ
C
1.6 = 1/16”O
156
MSS SP¯44FLANGES9.1
WELDING NECKS AND BLINDS ²26” ̄48”³ 900 LB.
Flange Hub Drilling template Approx. weight Kg. Pounds
Nominal Pipe Size
O mm Inch
B mm Inch
C1 mm Inch
C2 mm Inch
Y mm Inch
H mm Inch
Raised face X mm Inch
R mm Inch
Number of bolt holes
Dia. Of bolt holes
Dia. Of bolt circle
Welding Neck
Blind
26"1.085,9 42 3/4
139,7 5 1/2
160,3 6 5/16
285,8 11 1/4
660,4 26
774,7 30 1/2
749,3 29 1/2
2073
2 7/8952,5 37 1/2
665 1,466
1.060 2,337
28"1.168,4
46142,8 5 6/8
171,6 6 3/4
298,5 11 3/4
711,2 28
831,8 32 3/4
800,1 31 1/2
2079,4 3 1/8
1.022,4 40 1/4
783 1,726
1.306 2,879
30"1.231,9 48 1/2
149,2 5 7/8
182,5 7 3/16
311,2 12 1/4
762 30
869 35
857,3 33 3/4
2079,4 3 1/8
1.085,9 42 3/4
903 1,990
1.565 3,450
32"1.314,5 51 3/4
158,8 6 1/4
193,7 7 5/8
330,2 13
812,8 32
946,2 37 1/4
914,4 36
2085,7 3 3/8
1.155,7 45 1/2
1.056 2,328
1.885 4,156
34"1.397
55To be
165,1 6 1/2
204,8 8 1/16
349,3 13 3/4
863,6 34
1.006,5 39 5/8
965,2 38
2092,1 3 5/8
1.225,5 48 1/4
1.276 2,813
2.250 4,960
36"1.460,5 57 1/2
speci-fie
171,5 6 3/4
214,3 8 7/16
362 14 1/4
914,4 36
1.063,6 41 7/8
1.022,4 40 1/4
2092,1 3 5/8
1.289,1 50 3/4
1.439 3,172
2.595 5,721
38"1.460,5 57 1/2
by190,5 7 1/2
215,9 8 1/2
352,4 13 7/8
965,2 38
1.073,2 42 1/4
1.098,5 43 1/4
2092,1 3 5/8
1.289,1 50 3/4
1.400 3,086
2.610 5,754
40"1.511,3 59 1/2
pur-chaser
196,8 7 3/4
223,8 8 13/16
363,5 14 5/16
1.016 40
1.127,1 44 3/8
1.162,1 45 3/4
2492,1 3 5/8
1.339,9 52 3/4
1.481 3,265
2.870 6,327
42"1.562,1 61 1/2
206,4 8 1/8
231,8 9 1/8
371,5 14 5/8
1.066,8 42
1.176,3 46 5/16
1.212,9 47 3/4
2492,1 3 5/8
1.390,7 54 3/4
1.620 3,571
3.195 7,044
44"1.647,8 64 7/8
214,3 8 7/16
242,9 9 9/16
390,5 15 3/8
1.117,6 44
1.235,1 48 5/8
1.270 50
2498,4 3 7/8
1.463,7 57 5/8
1.780 3,924
3.720 8,201
46"1.733,5 68 1/4
225,4 8 7/8
255,6 10 1/16
411,2 16 3/16
1.168,4 46
1.292,2 50 7/8
1.333,5 52 1/2
24104,8 4 1/8
1.536,7 60 1/2
2.200 4,850
4.579 10,095
48"1.784,4 70 1/4
233,4 9 3/16
263,5 10 3/8
419,1 16 1/2
1.219,2 48
1.343 52 7/8
1.384,3 54 1/2
24104,8 4 1/8
1.587,5 62 1/2
2.364 5,212
4.730 10,428
Y
C
1.6 = 1/16”
1
2
HB
X
RJ
C
1.6 = 1/16”O
157
FLANGESMSS SP¯44 9.2
b
E
RP±0,005” ±0,127
L±1/64”±0,39
±1/64”±0,39±0,008”
±0,203±30”23° ±1/2?
R
D
RING JOINT FACINGS AND TOLERANCES
Nominal Size Facing dimensions
300 lb 400 lb 600 lb 900 lb Ring Number K L P D
26 26 26 R 93809,6231 7/8
12,70 1/2749,309 1/2
19,3825/32
28 28 28 R 94860,4233 7/8
12,70 1/2800,1031 1/2
19,8425/32
30 30 30 R 95917,5736 1/8
12,70 1/2857,2533 3/4
19,845/32
32 32 32 R 96984,2538 3/4
14,28 9/16914,40
3623,0229/32
34 34 34 R 971.035,0540 3/4
14,28 9/16965,20
3823,0229/32
36 36 36 R 981.092,20
4314,28 9/16
1.022,3540 1/4
23,0229/32
26 R 100831,8532 3/4
17,46 11/16749,3029 1/2
31,1613/16
28 R 10188935
17,46 11/16800,1031 1/2
33,3315/16
30 R 102946,1537 1/4
17,46 11/16857,2533 3/4
33,3315/16
32 R 1031.003,3039 1/2
17,46 11/16914,40
3633,3315/16
34 R 1041.066,80
4220,63 13/16
965,2038
36,5117/16
36 R 1051.123,9544 1/4
20,63 13/161.022,3540 1/4
36,5117/16
Flange Thicknes
Sizes NPS 26 and larger+0,19 in. (4,8 mm) -zero
Nominal outside diameter of welding and of welding neck flanges. Sizes NPS 26 and la ger+0,21 in. (5,6 mm) -0,06 in. (1,6 mm)
Nominal outside diameter of welding and of welding neck flanges. Sizes NPS 26 and la ger+0,12 in. (3 mm)-0,06 in. (2 mm)
Bolt circle diameterCenter - to - center of adjacent bolt holesEccentricity between bolt circle diameter and machined facing diameters. Sizes NPS 26 and larger
MSS STANDARD PRACTICE SP-44Welding Neck Flanges
DIMENSIONAL TOLERANCESOutside diameter, 0,06 in. (2 mm) raised face: Sizes NPS 26 and larger +/- 0,08 in. (2 mm). Outside diameter, 0,25 in.(7 mm) raised face: Sizes 26 and larger +/- 0,04 in. (1 mm).
158
159
Content
10.1 Welding Neck Flanges and Blinds ASME B16.47A 160
10.2 Welding Neck Flanges and Blinds ASME B16.47B 164
10.3 Dimensional Tolerances 167
10FLANGES B16.47 AŠB
160
ASME B16.47AFLANGES10.1
WELDING NECK FLANGES AND BLINDS ̄150LBS
b
b
1.6 mm
l
lr
D
k
g
ma
j h
1.6 mm
j
j = to be speciÿed by purchaser
a
h
37,5°
150 LB/SQ. IN.
DN D b a h mNumber of bolt holes
l k g r
Approximately weight kg
WN BL
26 869,9 68,3 660,4 120,6 676,1 24 35,1 806,4 749,3 9,7 150 306
28 927,1 71,4 711,2 125,5 726,9 28 35,1 863,6 800,1 11,2 171 363
30 984,2 74,7 762 136,7 781 28 35,1 914,4 857,2 11,2 200 431
32 1060,4 80,8 812,8 144,5 831,8 28 41,1 977,9 914,4 11,2 250 539
34 1111,2 82,5 863,6 149,4 882,6 32 41,1 1028,7 965,2 12,7 267 602
36 1168,4 90,4 914,4 157,2 933,4 32 41,1 1085,8 1022,3 12,7 316 733
38 1238,2 87,4 965,2 157,2 990,6 32 41,1 1149,3 1073,1 12,7 352 798
40 1289 90,4 1016 163,6 1041,4 36 41,1 1200,1 1123,9 12,7 379 895
42 1346,2 96,8 1066,8 171,4 1092,2 36 41,1 1257,3 1193,8 12,7 435 1048
44 1403,3 101,6 1117,6 177,8 1143 40 41,1 1314,4 1244,6 12,7 484 1195
46 1454,1 103,1 1168,4 185,7 1196,8 40 41,1 1365,2 1295,4 12,7 518 1306
48 1511,3 107,9 1219,2 192 1247,6 44 41,1 1422,4 1358,9 12,7 572 1476
50 1568,4 111,2 1270 203,2 1301,7 44 47,8 1479,5 1409,7 12,7 616 1625
52 1625,6 115,8 1320,8 209,5 1352,5 44 47,8 1536,7 1460,5 12,7 681 1823
54 1682,7 120,6 1371,6 215,9 1403,3 44 47,8 1539,8 1511,3 12,7 751 2040
56 1746,2 124 1422,4 228,6 1457,5 48 47,8 1651 1574,8 12,7 835 2256
58 1803,4 128,5 1473,2 234,9 1508,3 48 47,8 1708,1 1625,6 12,7 914 2501
60 1854,2 131,8 1524 239,7 1559,1 52 47,8 1758,9 1676,4 12,7 961 2710
NOTE: Dimensions in mm. The thickness of a Class 150 or 300 flange f om which the raised face han been removed shall be no less than the “b” minus 1.6 mm.
161
FLANGESASME B16.47A 10.1
WELDING NECK FLANGES AND BLINDS ̄300LBS
b1
b
1.6 mm
l
lr
D
k
g
ma
j h
1.6 mm
j
j = to be speciÿed by purchaser
a
h
37,5°
300 LB/SQ. IN.
DN D b b1 a h mNumber of bolt holes
l k g r
Approximately weight kg
WN BL
26 971,5 79,4 84,1 660,4 184 721 28 44,5 876,3 749,3 9,5 283 460
28 1035 85,7 90,5 711,2 197 774,5 28 44,5 939,8 800,1 11,1 343 566
30 1092,2 92,1 95,3 762 209,5 827 28 48 997 857,3 11,1 395 663
32 1149,5 98,4 100,1 812,8 222,5 881 28 51 1054,1 914,4 11,1 455 771
34 1206,5 101,6 104,7 863,6 231,5 937 28 51 1104,9 965,2 12,7 511 893
36 1270 104,8 111,3 914,4 241,5 990,5 32 54 1168,4 1022,4 12,7 568 1044
38 1168,5 108 108 965,2 181 993,5 32 41 1092,2 1028,7 12,7 318 875
40 1238,5 114,3 114,3 1016 193,5 1048 32 44,5 1155,7 1085,9 12,7 348 1039
42 1289 119,1 119,1 1066,8 200 1098,5 32 44,5 1206,5 1136,7 12,7 420 1177
44 1352,5 123,8 123,8 1117,6 206 1149,5 32 48 1263,7 1193,8 12,7 476 1346
46 1416 128,6 128,6 1168,4 216 1203,5 28 51 1320,8 1244,6 12,7 549 1536
48 1467 133,4 133,4 1219,2 224 1254 32 51 1371,6 1301,8 12,7 587 1707
50 1530,5 139,7 139,7 1270 231,5 1305 32 54 1428,8 1358,9 12,7 664 1944
52 1581 144,5 144,5 1320,8 238,5 1356 32 54 1479,6 1409,7 12,7 715 2153
54 1657,5 152,5 152,5 1371,6 252,5 1409,5 28 60,5 1549,4 1466,9 12,7 857 2494
56 1708 157 154 1422,4 260,5 1463,5 28 60,5 1600,2 1517,7 12,7 905 2682
58 1759 158,8 158,8 1473,2 266,5 1514,5 32 60,5 1651 1574,8 12,7 952 2925
60 1810 163,5 163,5 1524 273 1565 32 60,5 1701,8 1625,6 12,7 1015 3198
NOTE: Dimensions in mm. The thickness of a Class 150 or 300 flange f om which the raised face han been removed shall be no less than the “b” minus 1.6 mm.
162
ASME B16.47AFLANGES10.1
WELDING NECK FLANGES AND BLINDS ̄600LBS
b1
b
6.4 mm
l
lr
D
k
g
ma
j h
1.6 mm
j
j = to be speciÿed by purchaser
a
h
37,5°
600 LB/SQ. IN.
DN D b b1 a h mNumber of bolt holes
l k g r
Approximately weight kg
WN BL
26 1016,0 108,0 125,4 660,4 222,0 748,0 28 51,0 914,4 749,3 11,1 444 768
28 1073,1 111,1 131,8 711,2 235,0 803,0 28 54,0 965,2 800,1 12,7 499 900
30 1130,5 114,3 139,7 762,0 247,5 862,0 28 54,0 1022,4 857,3 12,7 567 1065
32 1194,0 117,5 147,6 812,8 260,5 917,5 28 60,5 1079,5 914,4 12,7 633 1243
34 1244,5 120,7 154,0 863,6 269,5 970,0 28 60,5 1130,3 965,2 14,3 695 1417
36 1314,5 123,8 161,9 914,4 282,5 1032,0 28 66,5 1193,8 1022,4 14,3 789 1652
38 1270,5 152,4 155,6 965,2 254,0 1022,5 28 60,5 1162,1 1054,6 14,3 667 1499
40 1321,0 158,8 161,9 1016,0 263,5 1073,0 32 60,5 1212,9 1111,3 14,3 717 1683
42 1403,5 168,3 171,5 1066,8 279,5 1127,5 28 66,5 1282,7 1168,4 14,3 886 2015
44 1454,0 173,0 177,8 1117,6 289,0 1181,0 32 66,5 1333,5 1225,6 14,3 940 2233
46 1511,5 179,4 185,7 1168,4 300,0 1235,0 32 66,5 1390,7 1276,4 14,3 1044 2530
48 1594,0 188,9 195,3 1219,2 316,0 1289,0 32 73,0 1460,5 1333,5 14,3 1236 2939
50 1670,0 196,9 203,2 1270,0 328,5 1343,0 28 79,0 1524,0 1384,3 14,3 1442 3667
52 1721,0 203,2 209,6 1320,8 336,5 1394,0 32 79,0 1574,8 1435,1 14,3 1514 3667
54 1778,0 209,6 217,5 1371,6 349,5 1448,0 32 79,0 1632,0 1492,3 14,3 1659 4078
56 1854,0 217,5 225,4 1422,4 362,0 1501,5 32 86,0 1695,5 1543,1 15,9 1869 4571
58 1905,0 222,3 231,8 1473,2 370,0 1552,5 32 86,0 1746,3 1600,2 15,9 1981 4974
60 1994,0 233,4 242,9 1524,0 389,0 1610,0 32 92,0 1822,5 1657,4 17,5 2382 5737
NOTE: Dimensions in mm.
163
FLANGESASME B16.47A 10.1
WELDING NECK FLANGES AND BLINDS ̄900LBS
b1
b
6.4 mm
l
lr
D
k
g
ma
j h
1.6 mm
j
j = to be speciÿed by purchaser
a
h
37,5°
900 LB/SQ. IN.
DN D b b1 a h mNumber of bolt holes
l k g r
Approximately weight kg
WN BL
26 1086,0 139,7 160,3 660,4 286,0 774,5 20 73,0 952,5 749,3 11,1 686 1099
28 1168,5 142,7 171,5 711,2 298,5 832,0 20 79,5 1022,4 800,1 12,7 808 1366
30 1232,0 149,2 182,5 762,0 311,0 889,0 20 79,5 1085,9 857,3 12,7 933 1617
32 1314,5 158,8 193,7 812,8 330,0 946,0 20 86,0 1155,7 914,4 12,7 1116 1929
34 1397,0 165,1 204,8 863,6 349,5 1007,0 20 92,0 1225,6 965,2 14,3 1310 2299
36 1460,5 171,5 214,3 914,4 362,0 1064,0 20 92,0 1289,1 1022,4 14,3 1479 2651
38 1460,5 190,5 215,9 965,2 352,5 1073,0 20 92,0 1289,1 1098,6 19,1 1445 2676
40 1511,5 196,9 223,8 1016,0 363,5 1127,5 24 92,0 1339,9 1162,1 20,6 1529 2940
42 1562,0 206,4 231,8 1066,8 371,5 1176,5 24 92,0 1390,7 1212,9 20,6 1666 3271
44 1648,0 214,3 242,9 1117,6 390,5 1235,0 24 98,5 1463,4 1270,0 22,2 1939 3801
46 1733,5 225,4 255,6 1168,4 411,0 1292,5 24 105,0 1536,7 1333,5 22,2 2265 4414
48 1784,5 233,5 263,5 1219,2 419,0 1343,0 24 105,0 1587,5 1384,3 23,8 2433 4850
NOTE: Dimensions in mm.
164
ASME B16.47B ̄EX API STANDARD 605FLANGES10.2
WELDING NECK FLANGES AND BLINDS ̄150LBS
b1
1.6 mm
1.6 mm
b
lg
Jam
kD
h
1.6 mm
J
J = to be speciÿed by purchaser
a
h
37,5°
150 LB/SQ. IN.
DN D b b1 a h mNumber of bolt holes
l k g
Approximately weight kg
WN BL
26 785,9 41,2 44,5 661,9 88,9 684,3 36 22,4 744,5 711,2 63 164
28 836,7 44,5 47,8 712,7 95,2 735,1 40 22,4 795,3 762,0 72 200
30 887,5 44,5 50,8 763,5 100,0 787,4 44 22,4 841,6 812,8 79 240
32 941,3 46,0 53,9 814,3 107,9 839,7 48 22,4 900,2 863,6 91 287
34 1004,8 49,3 57,2 865,1 110,3 892,1 40 25,4 957,3 920,8 109 347
36 1057,2 52,3 58,7 915,9 117,5 944,6 44 25,0 1009,7 971,6 124 395
38 1124,0 53,9 63,5 968,3 124,0 997,0 40 28,5 1069,9 1022,4 146 483
40 1174,8 55,6 66,6 1019,1 128,5 1049,3 44 28,5 1120,7 1079,5 159 553
42 1225,6 58,7 68,3 1069,9 133,3 1101,9 48 28,5 1171,5 1130,3 175 618
44 1276,4 60,5 71,4 1120,7 136,7 1152,7 52 28,5 1222,3 1181,1 187 701
46 1341,4 62,0 74,7 1171,5 144,5 1205,0 40 31,8 1284,2 1235,0 220 813
48 1392,2 65,0 77,7 1222,3 149,2 1257,3 44 31,8 1335,0 1289,1 239 911
50 1443,0 68,3 80,8 1273,1 153,9 1308,1 48 31,8 1385,8 1339,9 258 1017
52 1493,8 69,9 84,1 1323,9 157,2 1360,4 52 31,8 1436,6 1390,7 274 1134
54 1549,4 71,4 87,4 1374,7 162,1 1412,8 56 31,8 1492,3 1441,5 299 1268
56 1600,2 73,2 90,4 1425,5 166,6 1465,3 60 31,8 1543,1 1492,3 318 1400
58 1674,9 74,7 93,5 1476,3 174,8 1516,1 48 35,1 1611,4 1543,1 377 1589
60 1725,7 76,2 96,8 1527,1 179,4 1570,0 52 35,1 1662,2 1600,2 401 1746
NOTE: Dimensions in mm. The thickness of a Class 75, 150 or 300 flange f om which the raised face has been removed shall be no less than the “b” minus 1,6 mm.
165
FLANGESASME B16.47B ̄EX API STANDARD 605 10.2
WELDING NECK FLANGES AND BLINDS ̄300LBS
b1
1.6 mm
1.6 mm
b
lg
Jam
kD
h
1.6 mm
J
J = to be speciÿed by purchaser
a
h
37,5°
300 LB/SQ. IN.
DN D b b1 a h mNumber of bolt holes
l k g
Approximately weight kg
WN BL
26 866,8 88,9 88,9 665,2 144,5 701,6 32 35,1 803,2 736,6 185 390
28 920,7 88,9 88,9 716,0 149,4 755,7 36 35,1 857,3 787,4 202 441
30 990,6 93,7 93,7 768,4 158,0 812,8 36 38,1 920,8 844,6 246 537
32 1054,1 103,2 103,2 819,2 168,2 863,6 32 41,2 977,9 901,7 302 673
34 1108,0 103,2 103,2 870,0 173,0 917,5 36 41,2 1031,8 952,5 324 743
36 1171,5 103,2 103,2 920,8 180,9 965,2 32 44,5 1089,2 1009,7 363 843
38 1222,3 111,3 111,3 971,6 192,0 1016,0 36 44,5 1140,0 1060,5 407 978
40 1373,1 115,8 115,8 1022,4 198,4 1066,8 40 44,5 1190,8 1114,6 440 1104
42 1333,5 119,1 119,1 1074,7 204,8 1117,6 36 47,8 1244,6 1168,4 489 1249
44 1384,3 127,0 127,0 1125,5 214,4 1173,2 40 47,8 1295,4 1219,2 541 1433
46 1460,5 128,5 130,1 1176,3 222,3 1228,9 36 50,8 1365,3 1270,0 637 1641
48 1511,3 128,5 134,9 1227,1 223,8 1277,9 40 50,8 1416,1 1327,2 656 1819
50 1562,1 138,2 139,7 1277,9 235,0 1330,5 44 50,8 1466,9 1378,0 724 2011
52 1612,9 142,8 144,3 1328,7 242,8 1382,8 48 50,8 1517,7 1428,8 772 2212
54 1673,4 136,7 149,4 1379,5 239,8 1435,1 48 50,8 1577,9 1479,6 803 2473
56 1765,3 153,9 157,0 1430,3 268,2 1493,8 36 60,5 1651,0 1536,7 1075 2899
58 1827,3 153,9 162,1 1481,1 274,6 1547,9 40 60,5 1713,0 1593,9 1132 3184
60 1878,1 150,9 166,6 1531,9 271,5 1598,7 40 60,5 1763,8 1651,0 1168 3486
NOTE: Dimensions in mm. The thickness of a Class 75, 150 or 300 flange f om which the raised face has been removed shall be no less than the “b” minus 1,6 mm.
166
ASME B16.47B ̄EX API STANDARD 605FLANGES10.2
WELDING NECK FLANGES AND BLINDS ̄600/900LBS
600 LB/SQ. IN.
DN D b b1 a h mNumber of bolt holes
l k g
Approximately weight kg
WN BL
26 899,0 111,3 111,3 660,4 180,9 698,5 28 44,5 806,5 727,0 259 527
28 952,5 115,8 115,8 711,2 190,5 752,4 28 47,8 863,6 784,4 303 629
30 1022,4 125,5 127,0 762,0 204,7 806,5 28 50,8 927,1 841,3 376 794
32 1085,9 130,1 134,9 812,8 215,9 860,6 28 53,9 984,3 895,4 435 949
34 1162,1 141,2 144,3 863,6 233,4 914,4 24 60,5 1054,1 952,5 548 1165
36 1212,9 146,1 150,9 914,4 242,8 968,3 28 60,5 1104,9 1009,7 590 1320
900 LB/SQ. IN.
DN D b b1 a h mNumber of bolt holes
l k g
Approximately weight kg
WN BL
26 1022,4 134,9 153,9 660,4 258,8 743,0 20 66,6 901,7 762,0 538 935
28 1104,9 147,6 166,6 711,2 276,4 797,1 20 73,2 971,6 819,2 675 1177
30 1181,1 155,5 176,0 762,0 289,1 850,9 20 79,3 1035,1 876,3 798 1415
32 1238,3 160,3 185,7 812,8 303,3 908,1 20 79,3 1092,2 927,1 898 1654
34 1314,5 171,5 195,1 863,6 319,0 962,2 20 85,9 1155,7 990,6 1063 1950
36 1346,2 173,0 201,7 914,4 325,4 1016,0 24 79,3 1200,2 1028,7 1078 2001
NOTE: Dimensions in mm. Dimensional sizes equal and greates than 38” are as per B 16.47a norm.
b1
b
6.4 mm
l
lr
D
k
g
ma
j h
1.6 mm
j
j = to be speciÿed by purchaser
a
h
37,5°
167
FLANGESASME B16.47A¯B 10.3
DIMENSIONAL TOLERANCES
300 LB/SQ. IN.
b
b fino a 25 m+ 3,0– 0
g
Semplice risalto1,6 mm
± 2,0 mm
b 25 a 50 mm+ 4,8– 0
Semplice risalto6,4 mm
± 1,0 mm
b 50 a 75 mm+ 7,8– 0
a+ 5,3– 1,6
b oltre 75 mm+ 9,6– 0
m ± 3,0 mm
D* ± 3,2 mm
K ± 1,6 mmJ+ 3,0– 1,6
h ± 4,8 mm
NOTE: Dimensions in mm.The thickness of hub at the welding end shall never be less then 87,5% of the nominal thickness.* Tolerance for these dimensions not covered by ASME B16.47 a-b - BS 3293.
168168
169
Content
11.1 Introduction 170
11.2 O’lets 172
11.3 Elbow O’lets 177
11.4 Lateral O’lets 178
11.5 Flanged Nipple O’lets 179
11.6 Flanged Buttweld O’lets 181
11.7 Insert Branch O’lets 182
11O’LETS AND O’FLANGES
170
INTRODUCTIONO’LETS AND O’FLANGES11.1
INTRODUCTION
MANUFACTURER STANDARD:The O’lets in this catalogue is based on one manufacturers standard design and denominations. The standard design is based on ASME B31.3, but O’lets may be designed, manufactured and verified o other requirements at client request.
DESIGN OPTIMISATION:O’lets may be designed and manufactured to customers specific design equirements, i.e. O’let design to specific designparameters (e.g. PCS) and/or NORSOK EDS NBR3 to reduce the welding required in the crotch area.
DESIGN DETAILS REQUIRED FOR OPTIMISATION OF O’LETS:
• Design code• Design pressure and rating• Design temperature • Material grade/allowable stress• Wall thickness – for header and branch pipes• Corrosion allowance• Wall thickness tolerance
TYPES OF O’LETS:
• Buttweld Outlet (O’let) - Butt welded/Socket Welded/Threaded• Elbow Outlet – Butt welded/Socket Welded/Threaded• Lateral Outlet – Butt Welded/Socket Welded/Threaded• Nipple Outlet – Butt Welded/Threaded/Plain end• Insert Buttweld Outlet• Flanged Nipple Outlet
DESIGN VERIFICATION:Drawings and calculations for each individual O’let may be provided, if requested by the client at the enquiry stage.
DIMENSION UNIFICATION:O’lets may also be designed to fit a ange of run header dimensions – i.e. each O’let will be suitable for use on various header pipe size. This design will however require more welding during fabrication, as the O’let dimensions cannot be optimised to a specific size and the actual design pa ameters.
171
O’LETS AND O’FLANGESINTRODUCTION 11.1
READY TO WELD
Every fitting is shaped o fit the pipeand it self-aligning.
“Space” for welding the weldolet is raised off run pipe to establish proper weld gap by placing spacers, e.g. welding rods, under the fitting.
This provides a uniform welding gap between the curvature of the run and base of fitting
Longitudinal SectionWide bases or footings at crotch section distribute internal and external stresses. Gradual changes of section eliminate stress concentration. Funnel shaped opening provides improved fl w conditions. The outlet is machine bevelled for quick easy.
Butt-welding of the branch pipe for shop or field abrication.
Tack weld. The base joint is tack welded, preferably at four points, each half way between the crotch and skirt sections of the fitting.
The spacers are then removed.
Transverse Section Note the blending of the skirt section of the Weldolet to the run pipe to avoid abrupt change in intersection. Throat of weld at this point is designated by the welding bevel.
Layout the template is the inside of the fitting. Cut Hole. The hole in the run pipe on reducing sizes can be cut out either before or after the fitting is welded on.
The hole can be cut with a torch, a drill or a hole saw. Welding the fitting to the run pipe prior to cutting the hole helps prevent distortion on the run and can be done generally on outlet sizes over two inches.
Stringer bead. The stringer bead is applied completely around the base of the fitting. The e tablished weld gap ensures full penetration.
Reinforcing Beads. Reinforcing welds should be made at the crotch bevel areas of the fitting o provide maximum weld at the crotchtapering to minimu at the skirt. Particular care should be taken to weld only the bevel portion of the fitting. (See “ eld lines” on above drawing).
This eliminates the unnecessary use of continuous passes and prevents the erroneous practice of welding up to the rib on the skirt portion of the fitting. A ontinuous cover bead should be added to fill the b vel and provide a smooth tapered weld.
EXAMPLE OF WELD SEQUENCE
HOLE
SPACER
TOP VIEW SHOWING SPACERTO PROVIDE ROOT GAP
PIPE
SINGLE-BEVELGROOVE WELD
ROOT GAP
FINAL COVER BEADFIRST REINFORCING PASS
STRINGER BEADCONTINUOUSPASS AROUNDENTIRE FITTING
SECOND REINFORCING PASS
WELD LINE
FIRSTSTRINGER PASSSECONDSTRINGER PASS
FIRSTREINFORCINGPASSSECONDREINFORCINGPASS
RIB
SKIRT
FULLPENETRATION
SINGLEVEE-GROVWELD
172
O’LETS AND O’FLANGES11.2
BUTTWELD-OUTLETS, STANDARD AND EXTRA STRONG,SOCKET-OUTLETS AND THREADED-OUTLETS 3000 LBS.
OUTLET SIZE RUN-PIPE SIZES
1/2 1/2 3/4 1 1 1/2 - 1 1/4 2 1/2 - 2 8 - 3 36 - 10
3/4 3/4 1 1 1/2 - 1 1/4 2 1/2 - 2 5 - 3 12 - 6 36 - 141 1 1 1/4 1 1/2 2 2 1/2 3 1/2 - 3 5 - 4 10 - 6 36 - 12
1 1/4 1 1/4 1 1/2 2 2 1/2 3 1/2 - 3 5 - 4 8 - 6 18 - 10 36 - 201 1/2 1 1/2 2 2 1/2 3 4 - 3 1/2 6 - 5 12 - 8 24 - 14 36 - 26
2 2 2 1/2 3 3 1/2 4 5 6 10 - 8 18 - 12 36 - 202 1/2 2 1/2 3 3 1/2 4 5 6 8 12 - 10 18 - 14 36 - 20
3 3 3 1/2 4 5 6 8 10 14 - 12 20 - 16 36 - 243 1/2 3 1/2 4 5 6 8 10 14 - 12 20 - 16 36 - 24
4 4 5 6 8 10 14 - 12 20 - 16 36 - 24
NOTE: Outlet over 4” order to specific run-pipe siz
BUTTWELD-OUTLETS SCH. 160 AND XXS
OUTLET SIZE RUN-PIPE SIZES
1/2 1/2 1 1/4 - 3/4 36 - 1 1/2
3/4 1 - 3/4 2 - 1 1/4 6 - 2 1/2 36 - 81 1 2 1/2 - 1 1/4 10 - 3 36 - 12
1 1/4 1 1/2 - 1 1/4 2 1/2 - 2 10 - 3 36 - 121 1/2 1 1/2 2 1/2 - 2 3 1/2 - 3 8 - 4 20 - 10 36 - 24
2 2 2 1/2 3 1/2 - 3 5 - 4 8 - 6 18 - 10 36 - 20
NOTE: Outlet over 2” order to specific run-pipe siz
BUTTWELD-OUTLETS AND THREADED-OUTLETS 6000 LBS
OUTLET SIZE RUN-PIPE SIZES
1/2 1 - 3/4 2 - 1 1/4 6 - 2 1/2 36 - 8
3/4 1 2 1/2 - 1 1/4 10 - 3 36 - 121 1 1/4 - 1 1/2 2 1/2 - 2 10 - 3 36 - 12
1 1/4 1 1/2 2 1/2 - 2 3 1/2 - 3 8 - 4 20 - 10 36 - 241 1/2 2 2 1/2 3 1/2 - 3 5 - 4 8 - 6 18 - 10 36 - 20
2 2 1/2 3 4 5 6 10 - 8 20 - 12 36 - 24
12” run-pipe
6” run-pipe
3/4” Outlet(nom size)
1/32” max. gap0.8mm max. gap
O’LETS
DIMENSION UNIFICATIONIn norder to reduce warehouse inventory, our outlets have been unified o fit on dif erent run-pipe sizes with gap maximum of 1/32” between the run-pipe and outlet. This does not cause any problems during welding
173
O’LETS AND O’FLANGES 11.2
BUTTWELD-OUTLETS – STANDARD
REDUCED SIZES FULL SIZES
OUTLET SIZE (Inch)
A (mm)
C (mm)
Approx. Weight
A (mm)
C (mm)
D (mm)
Approx. Weight
1/2 19,0 24,0 0,1 19,0 24,0 15,8 0,1 3/4 22,2 30,0 0,1 22,2 30,0 21,0 0,1
1 27,0 36,5 0,3 27,0 36,5 26,6 0,21 1/4 31,5 44,5 0,4 31,5 44,5 35,0 0,31 1/2 33,4 51,0 0,5 33,4 51,0 40,9 0,4
2 38,0 65,0 0,8 38,0 65,0 52,5 0,72 1/2 41,2 76,2 1,1 41,2 76,2 62,8 1,0
3 44,5 93,5 1,8 44,5 93,5 78,0 1,73 1/2 47,5 112,6 2,5 47,5 112,6 90,2 2,3
4 51,0 120,5 2,9 51,0 120,5 102,2 3,15 57 141,3 4,7 57 141,3 128,2 3,96 60,3 170,0 6,5 60,3 170,0 154,0 6,78 69,8 220,5 10,7 69,8 220,5 202,5 13,0
10 78,0 274,0 18,0 78,0 274,0 254,0 16,012 86,0 324,0 27,0 86,0 324,0 304,5 27,014 89,0 356,0 30,0 89,0 356,0 336,5 32,0
BUTTWELD-OUTLETS – EXTRA STRONG
REDUCED SIZES FULL SIZES
OUTLET SIZE (Inch)
A (mm)
C (mm)
Approx. Weight
A (mm)
C (mm)
D (mm)
Approx. Weight
1/2 19,0 24,0 0,1 19,0 24,0 13,9 0,1 3/4 22,2 30,0 0,1 22,2 30,0 18,9 0,1
1 27,0 36,5 0,2 25,4 36,5 24,3 0,21 1/4 31,5 44,5 0,4 28,5 44,5 32,8 0,31 1/2 33,4 51,0 0,5 31,5 51,0 38,1 0,4
2 38,0 65,0 0,8 38,0 65,0 49,3 0,82 1/2 41,2 76,2 1,2 41,2 76,2 59,0 1,2
3 44,5 93,5 1,9 44,5 93,5 73,7 1,93 1/2 47,5 112,6 2,6 47,5 112,6 85,4 2,3
4 51,0 120,5 3,0 51,0 120,5 97,2 3,55 57 141,3 4,8 57 141,3 122,3 4,36 78,0 170,0 10,5 78,0 170,0 146,3 6,88 98,5 220,0 17,0 87,5 220,5 194,0 14,6
10 94,0 265,0 21,0 93,5 265,0 247,5 21,012 103,0 316,0 28,0 100,0 316,0 298,0 28,014 100,0 351,0 32,0 105,5 351,0 330,0 34,5
A
C
37 1/2°
A
C
37 1/2°
D
O’LETS
REDUCING SIZE FULL SIZE
174
O’LETS AND O’FLANGES11.2
BUTTWELD-OUTLETS – SCH. 160 AND XXS
REDUCED SIZES FULL SIZES
OUTLET SIZE (Inch)
A (mm)
C (mm)
Approx. Weight
A (mm)
C (mm)
Approx. Weight
1/2 28,5 14,3 0,1 28,5 14,3 0,1 3/4 31,5 19,0 0,3 31,5 19,0 0,3
1 38,0 25,5 0,4 38,0 25,5 0,41 1/4 44,5 33,4 0,6 44,5 33,4 0,61 1/2 50,7 38,0 0,8 50,7 38,0 0,8
2 55,5 42,9 1,0 55,5 42,9 1,02 1/2 61,8 53,9 1,6 61,8 53,9 1,6
3 73,0 73,0 2,9 73,0 73,0 2,94 84,0 98,4 4,8 84,0 98,4 4,85 93,5 122,2 6,5 93,5 122,2 6,56 104,7 146,0 12,8 104,7 146,0 13,8
A
C
37 1/2°
O’LETS
175
O’LETS AND O’FLANGES 11.2
SOCKETWELD OUTLETS - 3000 LBS (SOCKET WELD TO ASME B 16.11)
REDUCED SIZES FULL SIZES
OUTLET SIZE (Inch)
A (mm)
C (mm)
F (mm)
G (mm)
Approx. Weight
A (mm)
C (mm)
D (mm)
F (mm)
G (mm)
Approx. Weight
1/2 25,5 24,0 31,8 10,0 0,1 25,5 22,4 16,0 31,8 10,0 0,1 3/4 27,0 30,0 36,6 13,0 0,2 27,0 30,0 21,0 36,6 13,0 0,1
1 33,4 36,5 46,1 13,0 0,3 33,4 36,5 26,7 46,1 13,0 0,31 1/4 33,4 44,5 55,6 13,0 0,4 33,4 44,5 35,0 55,6 13,0 0,31 1/2 34,8 51,0 62,0 13,0 0,5 34,8 51,0 40,9 62,0 13,0 0,4
2 38,0 65,0 74,7 16,0 0,7 38,0 65,0 52,5 74,7 16,0 0,62 1/2 46,0 76,2 87,4 16,0 1,3 46,0 76,2 62,8 87,4 16,0 1,0
3 50,7 93,5 104,8 16,0 1,7 50,7 93,5 77,9 104,8 16,0 1,73 1/2 53,8 101,5 122,3 19,0 2,0 53,3 112,8 90,1 117,5 19,0 2,0
4 57,0 120,5 130,2 19,0 3,3 55,5 127,0 102,2 130,2 19,0 3,0
SOCKETWELD OUTLETS - 6000 LBS (SOCKET WELD TO ASME B 16.11)
REDUCING SIZES
OUTLET SIZE (Inch)
A (mm)
C (mm)
F (mm)
G (mm)
Approx. Weight
1/2 31,5 19,0 40,0 10,0 0,3 3/4 36,5 25,5 46,0 13,0 0,4
1 39,6 33,4 57,2 13,0 0,61 1/4 41,0 38,0 65,1 13,0 0,81 1/2 42,7 49,3 76,3 13,0 0,9
2 52,1 70,0 92,1 16,0 2,44 57,0 120,5 130,2 19,0 3,3
A
C
F
G
A
C
F
G
D
O’LETS
REDUCING SIZE FULL SIZE
176
O’LETS AND O’FLANGES11.2
THREADED OUTLETS - 3000 LBS
REDUCED SIZES FULL SIZES
OUTLET SIZE (Inch)
A (mm)
C (mm)
F (mm)
Approx. Weight
A (mm)
C (mm)
D (mm)
F (mm)
Approx. Weight
1/2 25,5 24,0 31,8 0,1 25,5 24,0 16,0 31,8 0,1 3/4 27,0 30,0 36,6 0,2 27,0 30,0 20,7 36,6 0,1
1 33,4 36,5 46,1 0,3 33,4 36,5 27,0 46,1 0,21 1/4 33,4 44,5 55,6 0,4 33,4 44,5 34,9 55,6 0,31 1/2 34,8 51,0 62,0 0,5 34,8 51,0 41,2 62,0 0,4
2 38,0 65,0 74,7 0,8 38,0 65,0 52,4 74,7 0,72 1/2 46,0 76,2 87,4 1,4 46,0 76,2 63,5 87,4 1,1
3 50,7 93,5 104,8 2,0 50,7 93,5 77,8 104,8 2,03 1/2 53,8 101,5 122,3 2,6 53,3 112,8 90,5 117,5 2,1
4 57,0 120,5 130,2 3,2 55,5 120,5 103,2 130,2 3,1
THREADED OUTLETS - 6000 LBS
REDUCING SIZES
OUTLET SIZE (Inch)
A (mm)
C (mm)
F (mm)
Approx. Weight
1/2 31,5 19,0 40,0 0,2 3/4 36,5 25,5 46,0 0,4
1 39,6 33,4 57,2 0,61 1/4 41,0 38,0 65,1 0,71 1/2 42,7 49,3 76,3 0,9
2 52,1 70,0 92,1 2,3
O’LETS
A
C
F
G
A
C
F
G
D
REDUCING SIZE FULL SIZE
177
O’LETS AND O’FLANGES 11.3
3000 LBS THREADED AND SOCKETWELD STANDARD AND EXTRA STRONG BUTT-WELD6000 LBS THREADED AND SOCKETWELD SCHEDULE 160 AND DOUBLE EXTRA STRONG BUTT-WELD
DIMENSIONS WEIGHT
Nominal Elbow Size
(Inch) 3000 lb
Nominal Elbow Size
(Inch) 6000 lb
OUTLET SIZE (Inch)
3000 lb C
6000 lbC
3000 lbD
6000 lbD
3000 lbE
6000 lbE
3000 lb Approx. Wt. Kg.
6000 lb Approx. Wt. Kg.
36 - 1 1/4 36 - 1 1/4 1/4 3/8 38,1 38,1 31,8 31,8 38,1 38,1 0,23 0,34
36 - 1 1/436 - 1 1/4 1/2 38,1 43,6 31,8 35,7 38,1 45,2 0,30 0,39
36 -2 3/4 43,6 54,0 35,7 45,2 45,2 54,4 0,34 0,57
36 - 2 36 - 21 54,0 73,0 45,2 54,8 52,4 55,6 0,52 1,00
1 1/4 73,0 79,4 54,8 63,5 55,6 58,8 0,86 1,7736 - 2 36 - 3 1 1/2 79,4 106,4 63,5 82,6 58,8 69,9 1,20 2,8036 - 3 - 2 106,4 - 82,6 - 69,9 - 2,39 -
NOTE: Dimensions in mm
D
E
C
ELBOW O’LETS
Dimensions for all three styles are the same except for the “D” dimension on the butt welding outlet which matches the proper schedule on the branch pipe.
BUTT-WELD THREADED SOCKET-WELD
178
O’LETS AND O’FLANGES11.4
3000 LBS THREADED AND SOCKETWELD STANDARD AND EXTRA STRONG BUTT-WELD6000 LBS THREADED AND SOCKETWELD SCHEDULE 160 AND DOUBLE EXTRA STRONG BUTT-WELD
DIMENSIONS WEIGHT
Nominal Elbow Size
(Inch) 3000 lb
Nominal Elbow Size
(Inch) 6000 lb
OUTLET SIZE (Inch)
3000 lb C
6000 lbC
3000 lbD
6000 lbD
3000 lbE
6000 lbE
3000 lb Approx. Wt. Kg.
6000 lb Approx. Wt. Kg.
12 - 1 1/4 12 - 2 1/2 12 - 1 1/4
1/4 3/8 36,5 36,5 31,8 31,8 39,7 39,7 0,23 0,34
12 - 1 1/4 12 - 1 1/4 1/2 36,5 43,6 31,8 35,7 39,7 47,6 0,30 0,3912 - 1 1/2 12 - 2 3/4 43,6 54,0 35,7 45,2 47,6 57,2 0,34 0,57
12 - 2 12 - 21 54,0 67,5 45,2 54,8 57,2 61,9 0,52 1,00
1 1/4 67,5 76,2 54,6 63,5 61,9 66,7 0,86 1,3212 - 2 12 - 4 1 1/2 76,2 104,8 63,5 82,6 66,7 81,0 1,20 2,8012 - 4 - 2 104,8 - 82,6 - 81,0 - 2,39 -
NOTE: Dimensions in mm. Other Outlet sizes are available on request.
DE
C
LATERAL O’LETS
Dimensions for all three styles are the same except for the “D” dimension on the butt welding outlet which matches the proper schedule on the branch pipe.
BUTT-WELD THREADED SOCKET-WELD
179
O’LETS AND O’FLANGES 11.5
B
F
C
LONGITUDINAL SECTION TRANSVERSE SECTION
C FOR REDUCING
E
A
ROOT GAP
TYPE 1TYPE 2
D FOR EQUAL
FLANGED NIPPLE O’LETS
The height (A) is 150mm for all sizes, except 2” 2500# that is 165mm. The bore (F) equals the nominal bore of the branch pipe. Dimensions in mm.
FLANGED NIPPLE OUTLETS - 150#
OUTLET SIZE B E
STD/XSC
160/XXSC1 TYPE
1/2 88,9 11,2 24,0 14,3 1 3/4 98,6 12,7 30,0 19,0 1
1 108,0 14,3 36,5 25,5 11 1/4 117,5 15,9 44,5 33,4 11 1/2 127,0 17,5 51,0 38,0 1
2 152,4 19,1 65,0 42,9 1
FLANGED NIPPLE OUTLETS - 300#
OUTLET SIZE B E
STD/XSC
160/XXSC
STD/XSTYPE
160/XXS TYPE
1/2 95,3 14,3 24,0 14,3 2 2 3/4 117,5 15,9 30,0 19,0 2 2
1 123,8 17,5 36,5 25,5 1 21 1/4 133,4 19,0 44,5 33,4 1 21 1/2 155,6 20,6 51,0 38,0 1 1
2 165,1 22,2 65,0 42,9 1 2
FLANGED NIPPLE OUTLETS - 600#
OUTLET SIZE B E
STD/XSC
160/XXSC
STD/XSTYPE
160/XXS TYPE
1/2 95,3 20,7 24,0 14,3 2 2 3/4 117,5 22,3 30,0 19,0 2 2
1 123,8 23,9 36,5 25,5 1 21 1/4 133,4 27,0 44,5 33,4 1 21 1/2 155,6 28,6 51,0 38,0 1 1
2 165,1 31,8 65,0 42,9 1 2
180
O’LETS AND O’FLANGES11.5
FLANGED NIPPLE O’LETS
FLANGED NIPPLE OUTLET - 2500#
OUTLET SIZE B E
STD/XSC
160/XXS C TYPE
1/2 133,4 36,6 24,0 14,3 2 3/4 139,7 38,1 30,0 19,0 2
1 158,8 41,3 36,5 25,5 21 1/4 184,2 44,5 44,5 33,4 21 1/2 203,2 50,8 51,0 38,0 2
2 235,0 57,2 65,0 42,9 2
FLANGED NIPPLE OUTLET - 900# / 1500#
OUTLET SIZE B E
STD/XSC
160/XXSC
STD/XSTYPE
160/XXS TYPE
1/2 120,7 28,6 24,0 14,3 2 2 3/4 130,2 31,8 30,0 19,0 1 1
1 149,2 35,0 36,5 25,5 1 21 1/4 158,8 35,0 44,5 33,4 1 21 1/2 177,8 38,1 51,0 38,0 1 1
2 215,9 44,5 65,0 42,9 2 2
181
O’LETS AND O’FLANGES 11.6
B
F
CC or D(C FOR REDUCING)
E
A
ROOT GAP
TYPE 1TYPE 2
(D FOR EQUAL)
A
C
FLANGED BUTTWELD O’LETS
Flanged Buttweld Outlet is available also for larger sizes than listed below (up to 24” for 150# to 1500#). Flanged Buttweld Outlet is available in all pressure classes - below listed 150# and 2500# are typical - others available at request.
The dimensions below are based on RF type falnges. Other facingss may be supplied at request. The C dimensions listed are based on Std wall for header and branch pipe. Any wall may be supplied at request. The bore (F) equals the nominal bore of the branch pipe. Dimensions in mm.
FLANGED BUTTWELD OUTLET - 150#
OUTLET SIZE B E A C TYPE
1/2 88,9 11,2 65,0 24,0 1 3/4 98,6 12,7 75,0 30,0 1
1 108,0 14,3 85,0 36,5 11 1/4 117,5 15,9 90,0 44,5 11 1/2 127,0 17,5 95,0 51,0 1
2 152,4 19,1 105,0 65,0 12 1/5 177,8 22,3 112,0 76,2 1
3 190,5 23,8 115,0 93,5 13 1/2 215,9 23,8 120,0 112,6 1
4 228,6 23,8 130,0 120,5 15 254,0 23,8 146,0 141,3 16 279,4 25,4 150,0 170,0 18 342,9 28,6 175,0 220,5 1
10 406,4 32,2 180,0 274,0 112 482,6 31,8 200,0 324,0 1
FLANGED BUTTWELD OUTLET - 2500#
OUTLET SIZE B E A C TYPE
1/2 133,5 36,5 100,0 24,0 2 3/4 139,7 38,1 110,0 30,0 2
1 158,8 41,3 125,0 36,5 21 1/4 184,2 44,5 135,0 44,5 21 1/2 203,2 50,8 150,0 51,0 2
2 235,0 57,2 170,0 65,0 22 1/5 266,7 63,5 190,0 76,2 2
3 304,8 73,0 220,0 93,5 24 355,6 82,6 250,0 120,5 25 419,1 98,4 290,0 141,3 26 482,6 114,3 340,0 170,0 28 552,5 133,4 395,0 220,5 2
10 673,1 171,5 505,0 274,0 212 762,0 190,5 555,0 324,0 212 482,6 31,8 200,0 324,0 1
NIPPLE OUTLET - 3000 / 6000 LBAvailable with plain / bevel / threaded end
OUTLET SIZE
A 3000 LB
C 6000 LB C
1/2 89,0 34,0 14,5 3/4 89,0 30,0 19,0
1 89,0 36,5 25,51 1/4 89,0 44,5 33,41 1/2 89,0 51,0 38,0
2 89,0 65,0 43,0
182
O’LETS AND O’FLANGES11.7
25°
B
HEADER
HEADERWALLTHICKNESS
B1
A
BRANCH
INSERTBRANCHOUTLET
25°
INSERT BRANCH O’LETS
Insert Branch Outlets are available for any header wall thickness. The below dimensions are applicable for header wall thickness up to and including XS.
OUTLET SIZE A
MIN HEADER
PIPE SIZE
1/2 32,0 1 1/2 3/4 32,0 2
1 32,0 2 1 1/4 32,0 2 1 1/2 38,0 2 1/2
2 44,0 3 Other3 51,0 4 dimensions4 60,0 6 available at6 68,0 8 specifi8 76,0 10 request
10 79,0 12 12 86,0 16 14 92,0 18 16 95,0 20 18 117,0 22 20 130,0 24 24 143,0 30
183
ASME B16.9/ MSS SP-75
184
185
Content
12.1 Size and Dimensions Tolerance 186
12.2 Nut Dimensions 187
12.3 Bolt Dimensions 189
12.4 Washer Dimensions 193
12.5 Threading Speifi ations 194
12.6 Studbolt Dimensions for all Flange Types 197
12.7 Weight Tables 201
12FASTENERS
186
IMPERIAL RANGE 5/16” ̄6”METRIC RANGE M6 ̄M150
STUDBOLTS: SIZE AND DIMENSIONS TOLERANCE
Length Inch Length Inch Tolerance mm
to 12 ± 0,052 ± 1,3208over 12 to 18 ± 0,125 ± 3,175
over 18 ± 0,250 ± 6,35
Nominal size or diameter INCH SERIES
1” and smallerUNIFIED COARSE THREAD SERIES
CLASS 2A ASME B1.1
1 1/8” and largerUNIFIED 8 THREAD SERIES
CLASS 2A ASME B1.1
Nominal size or diameter METRIC SERIES
M33 and smallerMETRIC COARSE THREAD SERIES
M36 and largerMETRIC FINE AND COARSE PITCH
THREADSCLASS 6g ISO 68/ISO 965
L
D
Studbolts for pressure - temperature piping
LENGTH The length of the stud bolt, measured parallel to the axis, is the distance from fi st thread to fi st thread.First thread is defined as the in ersection of the major diameter of the thread with the base of the point.
Metric seriesThe length of the stud bolt, measured parallel to the axis, is the distance from each and of the studbolt,including the end point.
MARKINGMarking conforms to ASTM designation for steel fasteners
THREADS
FASTENERS12.1
187
FASTENERSNUT DIMENSIONS 12.2
IMPERIAL RANGE 1/4” ̄6”
F
G
HH1 H1
0.4 mmApprox
H
0.4 mmApprox
DIMENSIONS OF HEAVY HEX NUTS AND HEAVY HEX JAM NUTS - ASME B18.2.2 - TABLE 10
Nominal Sizes
Width Acros FlatsF
Width Across CornesG
ThicknessH
ThicknessH1
min max min max min max min max
1/4 12,40 12,70 14,12 14,65 5,54 6,35 3,6 4,785/16 13,86 14,29 15,80 16,51 7,11 7,97 4,72 5,593/8 16,99 17,46 19,38 20,17 8,66 9,58 5,49 6,40
7/16 18,49 19,05 21,08 22,00 10,24 11,20 6,27 7,241/2 21,59 22,22 24,61 25,65 11,78 12,80 7,04 8,05
9/16 23,08 23,81 26,34 27,50 13,36 14,42 7,80 8,865/8 26,18 26,98 29,84 31,16 14,90 16,02 8,56 9,683/4 30,78 31,75 35,10 36,65 18,03 19,25 10,11 11,337/8 35,40 36,51 40,36 42,16 21,15 22,48 11,63 12,951 40,00 41,27 45,61 47,65 24,28 25,70 13,18 14,61
1 1/8 44,60 46,03 50,85 53,13 27,40 28,93 14,71 16,231 1/4 49,22 50,80 56,11 58,65 30,14 31,77 17,45 19,081 3/8 53,82 55,56 61,37 64,16 33,27 35,00 18,97 20,701 1/2 58,42 60,32 66,60 69,64 36,39 38,22 20,52 22,351 5/8 63,01 65,09 71,83 75,15 39,52 41,45 22,05 23,981 3/4 67,61 69,85 77,09 80,64 42,64 44,67 23,60 25,631 7/8 72,23 74,61 82,34 86,15 45,77 47,90 25,12 27,25
2 76,83 79,37 87,60 91,64 48,89 51,13 26,67 28,912 1/4 86,00 88,90 98,09 102,65 54,71 57,17 29,34 31,782 1/2 95,25 98,42 108,58 113,63 60,98 63,62 35,59 38,232 3/4 104,44 107,95 119,07 124,63 67,23 70,27 38,66 41,50
3 113,66 117,47 129,59 135,63 73,48 76,53 41,73 44,783 1/4 122,88 127,00 140,08 146,65 79,34 82,60 44,40 47,653 1/2 132,08 136,52 150,57 157,65 85,60 89,05 47,50 50,953 3/4 141,27 146,05 161,06 168,65 91,85 95,50 50,55 54,20
4 150,50 155,57 171,57 179,65 98,10 101,95 53,64 57,514 1/4 159,71 165,10 182,07 190,65 104,35 108,40 - -4 1/2 168,91 174,62 192,56 201,65 110,60 114,85 - -4 3/4 178,11 184,15 203,05 212,64 116,84 121,31 - -
5 187,33 193,67 213,57 223,64 123,09 127,76 - -5 1/4 196,53 203,20 224,05 234,64 129,34 134,21 - -5 1/2 205,74 212,73 234,54 245,63 135,59 140,67 - -5 3/4 214,95 222,25 245,04 256,63 141,83 147,12 - -
6 224,16 231,78 255,54 267,63 148,08 153,57 - -
NOTE: Dimensions in mm
188
METRIC RANGE M6 ̄M150
F
G
H
D 6H
120°
30°
H1
D 6H
120°
30°
H2
D 6H
120°
15°
DIMENSIONS OF HEX NUTS WITH METRIC COARSE AND FINE PITCH THREAD
Nominal Sizes
Width Acros FlatsF
Width Across Cornes
G
DIN 934 H=D H
DIN 934H1
DIN 936 H2
min max min max min max min max min maxM6 9,78 10,00 11,05 11,55 5,70 6,00 4,70 5,00 - -M8 12,73 13,00 14,38 15,00 7,64 8,00 6,14 6,50 4,70 5,00
M10 16,73 17,00 18,90 19,60 9,64 10,00 7,64 8,00 5,70 6,00M12 18,67 19,00 21,10 21,90 11,57 12,00 9,64 10,00 6,64 7,00M14 21,67 22,00 24,49 25,40 13,57 14,00 10,30 11,00 7,42 8,00M16 23,67 24,00 26,75 27,70 15,57 16,00 12,30 13,00 7,42 8,00M18 26,67 27,00 30,14 31,10 17,57 18,00 14,30 15,00 8,42 9,00M20 29,67 30,00 33,53 34,60 19,48 20,00 14,90 16,00 8,10 9,00M22 31,61 32,00 35,72 36,90 21,48 22,00 16,90 18,00 9,10 10,00M24 35,58 36,00 39,98 41,50 23, 48 24,00 17,70 19,00 9,10 10,00M27 40,38 41,00 45,63 47,30 26,48 27,00 20,70 22,00 10,90 12,00M30 45,38 46,00 51,28 53,10 29,48 30,00 22,70 24,00 10,90 12,00M33 49,38 50,00 55,80 57,70 32,38 33,00 24,70 26,00 12,90 14,00M36 54,26 55,00 61,31 63,50 35,38 36,00 27,40 29,00 12,90 14,00M39 59,26 60,00 66,96 69,30 38,38 39,00 29,40 31,00 14,90 16,00M42 64,26 65,00 72,61 75,00 41,38 42,00 32,40 34,00 14,90 16,00M45 69,26 70,00 78,26 80,80 44,38 45,00 34,40 36,00 16,90 18,00M48 74,26 75,00 83,91 86,50 47,38 48,00 36,40 38,00 16,90 18,00M52 79,26 80,00 89,56 92,40 51,26 52,00 40,40 42,00 18,70 20,00M56 84,13 85,00 95,07 98,10 55,26 56,00 43,40 45,00 20,70 22,00M60 89,13 90,00 100,72 103,90 59,26 60,00 46,40 48,00 22,70 24,00M64 94,13 95,00 106,37 109,70 63,26 64,00 49,10 51,00 24,70 26,00M68 99,13 100,00 112,02 115,50 67,26 68,00 52,10 54,00 24,70 26,00M72 104,13 105,00 117,67 121,25 71,26 72,00 56,10 58,00 26,70 28,00M76 109,13 110,00 123,32 127,00 75,26 76,00 59,10 61,00 28,70 30,00M80 114,13 115,00 128,97 132,80 79,26 80,00 62,10 64,00 30,40 32,00M85 119,13 120,00 134,62 138,60 84,13 85,00 66,10 68,00 32,40 34,00M90 129,00 130,00 145,77 150,10 89,13 90,00 70,10 72,00 34,40 36,00M95 134,00 135,00 151,42 155,90 94,13 95,00 74,10 76,00 36,40 38,00
M100 144,00 145,00 162,72 167,40 99,13 100,00 78,10 80,00 38,40 40,00M105 147,50 150,00 168,37 173,21 102,80 105,00 81,80 84,00 40,40 42,00M110 152,50 155,00 172,32 178,98 107,80 110,00 85,80 88,00 42,40 44,00M115 162,50 165,00 185,32 190,53 112,80 115,00 89,80 92,00 44,40 46,00M120 167,50 170,00 190,97 196,30 117,80 120,00 93,80 96,00 46,40 48,00M125 177,50 180,00 200,57 207,85 122,50 125,00 97,80 100,00 48,40 50,00M130 180,40 185,00 207,75 213,62 127,50 130,00 101,80 104,00 50,10 52,00M135 185,40 190,00 213,40 219,40 132,50 135,00 105,80 108,00 52,10 54,00M140 195,40 200,00 220,80 230,95 137,50 140,00 109,80 112,00 54,10 56,00M145 205,4 210,00 236,00 242,49 142,50 145,00 113,80 116,00 56,10 58,00M150 205,4 210,00 236,00 242,49 147,50 150,00 117,80 120,00 58,10 60,00
NOTE: Dimensions in mm
NUT DIMENSIONSFASTENERS12.2
189
FASTENERSBOLT DIMENSIONS 12.3
IMPERIAL RANGE 1/4” ̄3” ̄METRIC RANGE M6 ̄M52
F
G
H
L
LTY
LG
30 DEG+0° -15°
DIMENSIONS OF HEX BOLTS - ASME 18.2.1 - TABLE 2
Nominal Size
E Body Diameter
F Width Across
Flats
G Width Across
Cornes
H Height
LTThread Lenght Y
min max min max min max min max up to 6” basic
over 6”basic max
1/4 6,00 6,60 10,80 11,10 12,80 12,30 3,80 4,80 19,00 25,40 -5/16 7,60 8,20 12,30 12,70 14,70 14,00 5,00 6,00 22,20 28,60 -3/8 9,10 9,90 13,80 14,30 16,50 15,70 5,70 6,80 25,40 31,80 -7/16 10,70 11,50 15,30 15,90 18,30 17,40 6,90 8,00 28,60 64,90 -
DIMENSIONS OF HEAVY HEX BOLTS - ASME 18.2.1 - TABLE 3
3/8 9,10 9,80 17,00 17,50 19,40 20,20 5,70 6,80 25,40 31,80 7,901/2 12,24 13,08 21,60 22,20 24,60 25,70 7,70 9,20 31,80 38,10 9,805/8 15,37 16,31 26,20 27,00 29,80 31,20 9,30 11,30 38,10 44,50 11,603/4 18,52 19,51 30,80 31,80 35,10 36,70 11,60 13,30 44,50 50,80 12,707/8 21,64 22,73 35,40 36,50 40,40 42,20 13,50 15,30 50,80 57,20 14,101 24,79 25,96 40,00 41,30 45,60 47,70 15,00 17,80 57,20 63,50 15,90
1 1/8 27,89 29,18 44,60 46,00 50,90 53,20 16,70 19,80 63,50 69,90 18,101 1/4 31,06 32,44 49,20 50,80 59,10 58,60 19,00 22,30 69,90 76,20 18,101 3/8 34,16 35,66 53,80 55,60 61,40 64,20 20,60 23,90 76,20 82,60 21,201 1/2 37,34 38,89 58,40 60,30 66,60 69,60 22,90 26,30 82,60 88,90 21,201 3/4 43,59 45,34 67,60 69,90 77,10 80,40 26,80 30,40 95,30 101,60 25,40
2 49,89 51,79 76,80 79,40 87,60 91,60 29,80 35,30 108,00 114,30 28,202 1/4 56,24 58,55 86,10 88,90 98,10 102,60 33,70 39,30 120,70 127,00 28,202 1/2 62,51 65,00 95,30 98,40 108,30 113,60 37,60 43,40 133,40 139,70 31,802 3/4 68,86 71,81 104,40 108,00 119,10 124,60 41,50 47,50 146,10 152,40 31,80
3 75,21 78,26 113,70 117,50 129,60 135,60 46,10 52,50 158,80 165,10 31,80
NOTE: Dimensions in mm
190
IMPERIAL RANGE 1/4” ̄3” ̄METRIC RANGE M6 ̄M52
F
G
H
L
LTY
LG
30 DEG+0° -15°
DIMENSIONS OF HEXAGONAL BOLTS - DIN 931 - DIN 933
Nominal Size
E Body Diameter
F Width Across
Flats
G Width Across
Cornes
H Height
LTThread Lenght
min max min max min min max up to 120
up to 200
over 200
M6 5,82 6,00 9,78 10,00 11,05 3,85 4,00 18 24M8 7,78 8,00 12,57 13,00 14,38 5,06 5,54 22 28
M10 9,78 10,00 16,57 17,00 18,90 6,11 6,69 26 32 45M12 11,73 12,00 18,48 19,00 21,10 7,21 7,79 30 36 49M14 13,73 14,00 21,16 22,00 24,49 8,51 9,09 34 40 53M16 15,73 16,00 23,16 24,00 26,75 9,71 10,29 38 44 57M18 17,73 18,00 26,16 27,00 30,14 11,15 11,85 42 48 61M20 19,67 20,00 29,16 30,00 33,53 12,15 12,85 46 52 65M22 21,67 22,00 31,00 32,00 35,72 13,65 14,35 50 56 69M24 23,67 24,00 35,00 36,00 39,98 14,65 15,35 54 60 73M27 26,48 27,00 40,00 41,00 45,20 16,65 17,35 60 66 79M30 29,48 30,00 45,00 46,00 50,85 18,28 19,12 66 72 85M33 32,38 33,00 49,00 50,00 55,37 20,58 21,42 72 78 91M36 35,38 36,00 53,80 55,00 60,79 22,80 22,92 78 84 97M39 38,38 39,00 58,80 60,00 66,44 24,58 25,42 84 90 103M42 41,38 42,00 63,10 65,00 71,30 25,58 26,42 90 96 109M45 44,38 45,00 66,10 70,00 76,95 27,58 28,42 96 102 115M48 47,38 48,00 73,10 75,00 82,60 29,58 30,42 102 108 121M52 51,26 52,00 78,10 80,00 88,25 32,50 33,50 116 129
NOTE: Dimensions in mm
BOLT DIMENSIONSFASTENERS12.3
191
FASTENERSBOLT DIMENSIONS 12.3
IMPERIAL RANGE 1/4” ̄3” ̄METRIC RANGE M6 ̄M52
C
HT
L
LT
LG
D
T LTLG
120° MIN
A
J
A
M
DIMENSIONS OF SOCKET HEAD CAP SCREWS - ASME 18.3 - TABLE 1A
Nominal Size
D Body Diameter
A Head Diameter
HHead Height
CChamfer
J Hex Socket
Size
TKey
Engagement
LTThread Length
min max min max min max max nom min
1/4 6,18 6,35 9,27 9,53 6,20 6,35 0,64 4,78 3,05 25,405/16 7,57 7,94 11,61 11,91 7,77 7,92 0,84 6,35 3,84 28,403/8 9,14 9,53 13,97 14,27 9,35 9,53 1,02 7,92 4,62 31,80
7/16 10,69 11,11 16,31 16,66 10,92 11,13 1,19 9,53 5,41 35,101/2 12,24 13,08 18,67 19,05 12,50 12,70 1,40 9,53 6,22 38,10
9/16 14,07 14,29 21,01 21,41 14,07 14,27 1,57 11,10 7,01 38,105/8 15,37 16,31 23,39 23,83 15,65 15,88 1,78 12,70 7,80 44,503/4 18,52 19,51 28,12 28,58 18,80 19,05 2,16 15,88 9,40 50,807/8 21,64 22,73 32,84 33,32 21,95 22,23 2,54 19,05 10,97 57,201 24¿79 25,96 37,57 38 10 25,10 25 40 2,90 19,05 12,57 63,50
1 1/8 27,89 29,18 42,29 42,88 28,22 28,58 3,28 22,23 14,15 71,401 1/4 31,06 32,44 47,04 47,63 31,39 31,75 3,66 22,23 15,75 79,201 3/8 34,16 35,66 51,77 52,37 34,54 34,93 4,06 25,40 17,32 87,401 1/2 37,34 38,89 56,49 57,15 37,72 38,10 4,47 25,40 18,92 95,301 3/4 43,59 45,34 65,96 66,68 44,04 44,45 5,26 31,75 22,10 111,30
2 49,89 51,79 75,44 76,20 50,37 50,80 6,05 38,10 25,27 127,002 1/4 56,24 58,55 84,94 85,73 56,69 57,15 6,83 44,45 28,45 142,702 1/2 62,51 65,00 94,41 95,25 63,02 63,50 7,62 44,45 31,62 158,802 3/4 68,86 71,81 103,89 104,78 69,34 69,85 8,43 50,80 34,80 174,80
3 75,21 78,26 113,39 114,30 75,67 76,20 9,22 57,15 37,97 190,50
NOTE: Dimensions in mm
192
IMPERIAL RANGE 1/4” ̄3” ̄METRIC RANGE M6 ̄M52
C
HT
L
LT
LG
D
T LTLG
120° MIN
A
J
A
M
DIMENSIONS OF SOCKET HEAD CAP SCREWS - DIN 912
Nominal Size
D Body Diameter
A Head Diameter
HHead Height
J Hex Socket Size
TKey
Engagement
LTThread Length
min max min max min max min max min
M6 5,82 6,00 9,78 10,00 5,70 6,00 5,02 5,14 3,00 30M8 7,78 8,00 12,73 13,00 7,64 8,00 6,02 6,14 4,00 35
M10 9,78 10,00 15,73 16,00 9,64 10,00 8,03 8,18 5,00 40M12 11,73 12,00 17,73 18,00 11,57 12,00 10,03 10,18 6,00 50M14 13,73 14 00 20,67 21,00 13,57 14,00 12,03 12,21 7,00 55M16 15,73 16,00 23,67 24,00 15,57 16,00 14,03 14,21 8,00 60M18 17,73 18,00 26,67 27,00 17,57 18,00 14,03 14,21 9,00 65M20 19,67 20,00 29,67 30,00 19,48 20,00 17,05 17,23 10,00 70M22 21,67 22,00 32,61 33,00 21,48 22,00 17,05 17,23 11,00 70M24 23,67 24 00 35,61 36,00 23,48 24,00 19,07 19,28 12,00 80M27 26,67 27,00 39,61 40,00 26,48 27,00 19,07 19,28 13,50 90M30 29,67 30,00 44,61 45,00 29,48 30,00 22,07 22,28 15,50 100M33 32,61 33,00 49,61 50,00 32,38 33,00 24,07 24,28 18,00 100M36 35,61 36,00 53,54 54,00 35,38 36,00 27,07 27,28 19,00 110M39 38,61 39 00 57,54 58,00 38 38 39,00 27,07 27 28 21 00 120M42 41,61 42,00 62,54 63,00 41,38 42,00 32,08 32,33 24,00 130M45 44,61 45,00 66,54 67,00 44,38 45,00 32,08 32,33 26,00 140M48 47,61 48,00 71,54 72,00 47,38 48,00 36,08 36,33 28,00 150M52 51,54 52,00 77,48 78,00 51,26 52,00 36,08 36,33 31,00 150
NOTE: Dimensions in mm
BOLT DIMENSIONSFASTENERS12.3
193
FASTENERSWASHER DIMENSIONS 12.4
PLAIN WASHERS ̄DIN 125A
B C
A
DIMENSIONS OF WASHERS
Nominal Size A B C
M6 1/4 6,4 12 1,6M7 7,4 14 1,6M8 5/16 8,4 16 1,6
M10 3/8 10,5 20 2M12 7/16 13 24 2,5M14 1/2 15 28 2,5M16 9/16 - 5/8 17 30 3M18 19 34 3M20 3/4 21 37 3M22 7/8 23 39 3M24 25 44 4M27 1 28 50 4M30 1 1/8 31 56 4M33 1 1/4 34 60 5M36 1 3/8 37 66 5M39 1 1/2 40 72 6M42 1 5/8 43 78 7M45 1 3/4 46 85 7M48 1 7/8 50 92 8M52 2 54 98 8M56 2 1/4 58 105 9M60 62 110 9M64 2 1/2 66 115 9M68 70 120 10M72 2 3/4 74 125 10M76 3 78 135 10M80 82 140 12M85 3 1/4 87 145 12M90 3 1/2 93 160 12M95 3 3/4 98 165 12
M100 4 104 175 14
NOTE: Dimensions in mm Special and large dimensions produced to order
194
THREADING SPECIFICATIONS
ISO METRIC THREAD WITH TRIANGULAR PROFILE ISO 965 - DIN 13 class 6g and 6H
EXTERNAL mm INTERNAL mm
Nom.Size Threads
Major Diameter Pitch Diameter Minor Major Minor Diameter Pitch Diameter Weight x 1
mm
min max min max min max min max min
M 6 1 5,794 5,794 5,212 5,324 4,711 6,000 4,917 5,153 5,350 5,500 0,00017
M 8 1,25 7,760 7,972 7,042 7,160 6,407 8,000 6,647 6,912 7,188 7,348 0,00032
M 10 1,5 9,732 9,968 8,862 8,994 8,108 10,000 8,376 8,676 9,026 9,206 0,00049
M 12 1,75 11,701 11,966 10,679 10,829 9,807 12,000 10,106 10,441 10,863 11,063 0,00072
M 14 2 13,682 13,962 12,503 12,663 11,517 14,000 11,835 12,210 12,701 12,913 0,00098
M 16 2 15,682 15,962 14,503 14,663 13,517 16,000 13,835 14,210 14,701 14,913 0,00131
M 18 2,5 17,623 17,958 16,164 16,334 14,917 18,000 15,294 15,744 16,376 16,600 0,00164
M 20 2,5 19,623 19,958 18,164 18,334 16,917 20,000 17,294 17,744 18,376 18,600 0,00206
M 22 2,5 21,623 21,958 20,164 20,334 18,917 22,000 19,294 19,744 20,376 20,600 0,00254
M 24 3 23,577 23,952 21,803 22,003 20,329 24,000 20,752 21,252 22,051 22,316 0,00297
M 27 3 26,577 26,952 24,803 25,003 23,329 27,000 23,752 24,252 25,051 25,316 0,00384
M 30 3,5 29,522 29,947 27,462 27,674 25,733 30,000 26,211 26,771 27,727 28,007 0,00470
M 33 3,5 32,522 32,947 30,462 30,674 28,733 33,000 29,211 29,771 30,727 31,007 0,00577
M 36 3 35,577 35,952 33,803 34,003 32,329 36,000 32,752 33,252 34,051 34,316 0,00710
M 39 3 38,577 38,952 36,803 37,003 35,329 39,000 35,752 36,252 37,051 37,316 0,00839
M 42 3 41,577 41,952 39,803 40,003 38,329 42,000 38,752 39,252 40,051 40,316 0,00982
M 45 3 44,577 44,952 42,803 43,003 41,329 45,000 41,752 42,252 43,051 43,316 0,01135
M 48 3 47,577 47,952 45,791 46,003 44,329 48,000 44,752 45,252 46,051 46,331 0,01299
M 52 3 51,577 51,952 49,791 50,003 48,329 52,000 48,752 48,252 50,051 50,331 0,01535
M 56 4 55,465 55,940 53,106 53,342 51,135 56,000 51,670 52,270 53,402 53,717 0,01748
M 60 4 59,465 59,940 57,106 57,342 55,135 60,000 55,670 56,270 57,402 57,717 0,02021
M 64 4 63,465 63,940 61,106 61,342 59,135 64,000 59,670 60,270 61,402 61,717 0,02317
M 68 4 67,465 67,940 65,106 65,342 63,135 68,000 63,670 64,270 65,402 65,717 0,02625
M 72 4 71,465 71,940 69,106 69,342 67,135 72,000 67,670 68,270 69,402 69,717 0,02957
M 76 4 75,465 75,940 73,106 73,342 71,135 76,000 71,670 72,270 73,402 73,717 0,03308
M 80 4 79,465 79,940 77,106 77,342 75,135 80,000 75,670 76,270 77,402 77,717 0,03679
M 85 4 84,465 84,940 82,106 82,342 80,135 85,000 80,670 81,270 82,402 82,717 0,04171
M 90 4 89,465 89,940 87,106 87,342 85,135 90,000 85,670 86,270 87,402 87,717 0,04693
M 95 4 94,465 94,940 92,092 92,342 90,135 95,000 90,670 91,270 92,402 92,737 0,05247
M 100 4 99,465 99,940 97,092 97,342 95,135 100,000 95,670 96,270 97,402 97,737 0,05863
M 105 4 104,465 104,940 102,092 102,342 100,135 105,000 100,670 101,270 102,402 102,737 0,0644
M 110 4 109,465 109,940 107,092 107,342 105,135 110,000 105,670 106,270 107,402 107,737 0,07086
M 115 4 114,465 114,940 112,092 112,342 110,135 115,000 110,670 111,270 112,402 112,737 0,07762
M 120 4 119,465 119,940 117,092 117,342 115,135 120,000 115,670 116,270 117,402 117,737 0,08468
M 125 4 124,465 124,940 122,092 122,342 120,135 125,000 120,670 121,270 122,402 122,737 0,09543
M 130 4 129,465 129,940 127,092 127,342 125,135 130,000 125,670 126,270 127,402 127,737 0,10325
M 135 4 134,465 134,940 132,092 132,342 130,135 135,000 130,670 131,270 132,402 132,737 0,11138
M 140 4 139,465 139,940 137,092 137,342 135,135 140,000 135,670 136,270 137,402 137,737 0,11981
M 145 4 144,465 144,940 142,092 142,342 140,135 145,000 140,670 141,270 142,402 142,373 0,12856
M 150 4 149,465 149,940 147,092 147,342 145,135 150,000 145,670 146,270 147,402 147,373 0,13761
NOTE: Dimensions in mm
THREADING SPECIFICATIONSFASTENERS12.5
195
FASTENERSTHREADING SPECIFICATIONS 12.5
THREADING SPECIFICATIONS
UNC THREAD SERIE ASME B 1.1 Class 2A and 2B
EXTERNAL mm INTERNAL mm
Nom.Size Threads
Major Diameter Pitch Diameter Minor Major Minor Diameter Pitch Diameter Weight x 1
mm
min max min max min max min max min
1/4 20 6,116 6,322 5,403 5,497 4,765 6,350 4,978 5,258 5,525 5,648 0,00018
5/16 18 7,686 7,907 6,888 6,990 6,228 7,938 6,401 6,731 7,021 7,155 0,0003
3/8 16 9,253 9,492 8,349 8,461 7,600 9,525 7,798 8,153 8,494 8,639 0,00044
7/16 14 10,815 11,077 9,779 9,898 8,918 11,113 9,144 9,550 9,934 10,089 0,00060
1/2 13 12,385 12,662 11,265 11,392 10,335 12,700 10,592 11,024 11,430 11,595 0,00079
9/16 12 13,957 14,247 12,741 12,873 11,272 14,288 11,989 12,446 12,913 13,086 0,00102
5/8 11 15,525 15,832 14,194 14,333 13,081 15,875 13,386 13,868 14,376 14,559 0,00126
3/4 10 18,677 19,004 17,203 17,353 15,979 19,050 16,307 16,84 17,399 17,595 0,00185
7/8 9 21,824 22,176 20,183 20,343 18,816 22,225 19,177 19,761 20,391 20,599 0,00254
1 8 24,968 25,349 23,114 23,287 21,570 25,400 21,971 22,606 23,338 23,561 0,00333
1 1/8 7 28,103 28,519 25,977 26,162 24,199 28,575 24,638 25,349 26,218 26,457 0,00430
1 1/4 7 31,278 31,694 29,149 29,337 27,374 31,750 27,813 28,524 29,393 29,637 0,00539
1 3/8 6 34,402 34,864 31,91 32,113 29,825 34,925 30,353 31,115 32,174 32,438 0,00661
1 1/2 6 37,577 38,039 35,082 35,288 33,000 38,100 33,528 34,290 35,349 35,616 0,00795
1 5/8 6 40,749 41,212 38,252 38,461 36,185 41,275 36,703 37,465 38,524 38,796 0,00942
1 3/4 6 43,924 44,387 41,425 41,636 39,347 44,450 39,878 40,640 41,699 41,974 0,01101
1 7/8 6 47,099 47,567 44,597 44,811 42,522 47,625 43,053 43,815 44,874 45,154 0,01272
2 4,5 50,168 50,726 46,82 47,061 44,003 50,800 44,679 45,593 47,135 47,450 0,01456
2 1/4 4,5 56,518 57,076 53,164 53,411 50,353 57,150 51,029 51,943 53,485 53,805 0,01862
2 1/2 4 62,817 63,421 59,032 59,296 55,860 63,500 56,617 57,582 59,375 59,718 0,02317
2 3/4 4 69,164 69,769 65,377 65,644 62,207 69,850 62,967 63,932 65,725 66,073 0,02822
3 4 75,514 76,119 71,722 71,994 68,557 76,200 69,317 70,282 72,075 72,428 0,03376
3 1/4 4 81,862 82,466 78,064 78,341 74,905 82,550 75,667 76,632 78,425 78,783 0,0398
3 1/2 4 88,212 88,816 84,412 84,691 81,255 88,900 82,017 82,982 84,775 85,138 0,04634
3 3/4 4 94,559 95,164 90,754 91,039 87,602 95,250 88,367 89,332 91,125 91,493 0,05338
4 4 100,909 101,514 97,102 97,389 93,952 101,600 94,717 95,682 97,475 97,848 0,06092
4 1/4 4 107,259 107,864 103,447 103,739 100,302 107,950 101,067 102,032 103,825 104,204 0,06891
4 1/2 4 113,607 114,211 109,792 110,086 106,650 114,300 107,417 108,381 110,175 110,559 0,07745
4 3/4 4 119,957 120,561 116,139 116,436 113,000 120,650 113,767 114,732 116,525 116,914 0,08646
5 4 126,304 126,909 122,481 122,784 119,347 127,000 120,117 121,082 122,875 123,266 0,09590
5 1/4 4 132,654 133,259 128,829 129,134 125,697 133,500 126,467 127,432 129,225 129,621 0,10224
5 1/2 4 139,004 139,609 135,176 135,484 132,047 139,700 132,817 133,782 135,575 135,976 0,11256
5 3/4 4 145,352 145,956 141,521 141,831 138,394 146,050 139,167 140,132 141,925 142,329 0,12337
6 4 152,702 152,306 147,866 148,181 144,744 152,400 145,517 146,482 148,275 148,684 0,13468
NOTE: Dimensions in mm
196
THREADING SPECIFICATIONS
8UN THREAD SERIE ASME B 1.1 Class 2A and 2B
EXTERNAL mm INTERNAL mm
Nom.Size Threads
Major Diameter Pitch Diameter Minor Major Minor Diameter Pitch Diameter Weight x 1
mm
min max min max min max min max min
1 1/8 8 28,141 28,522 26,284 26,459 24,742 28,575 25,146 25,781 26,513 26,741 0,00430
1 1/4 8 31,316 31,697 29,456 29,634 27,917 31,750 28,321 28,956 29,688 29,921 0,00539
1 3/8 8 34,488 34,869 32,624 32,807 31,090 34,925 31,496 32,131 32,863 33,099 0,00661
1 1/2 8 37,663 38,044 35,796 35,982 34,265 38,100 34,671 35,306 36,038 36,279 0,00795
1 5/8 8 40,838 41,219 38,969 39,157 37,551 41,275 37,846 38,481 39,213 39,459 0,00942
1 3/4 8 44,011 44,392 42,139 42,329 40,612 44,450 41,021 41,656 42,388 42,636 0,01101
1 7/8 8 47,186 47,567 45,309 45,504 43,787 47,625 44,196 44,831 45,563 45,817 0,01272
2 8 50,361 50,742 48,481 48,679 46,962 50,800 47,371 48,006 48,738 48,994 0,01456
2 1/4 8 56,708 57,089 54,823 55,027 53,310 57,150 53,721 54,356 55,088 55,352 0,01862
2 1/2 8 63,058 63,439 61,168 61,377 59,660 63,500 60,071 60,706 61,438 61,707 0,02317
2 3/4 8 69,406 69,787 67,513 67,724 66,007 69,850 66,421 67,056 67,788 68,062 0,02822
3 8 75,752 76,134 73,856 74,071 72,354 76,200 72,771 73,406 74,138 74,419 0,03376
3 1/4 8 82,103 82,484 80,201 80,421 78,704 82,550 79,121 79,756 80,448 80,775 0,0398
3 1/2 8 88,453 88,834 86,548 86,771 85,054 88,900 85,471 86,106 87,130 86,838 0,04634
3 3/4 8 94,800 95,181 92,890 93,119 91,402 95,250 91,821 92,456 93,188 93,485 0,05338
4 8 101,150 101,531 99,238 99,469 97,752 101,600 98,171 98,806 99,538 99,840 0,06092
4 1/4 8 107,498 107,879 105,580 105,816 104,099 107,950 104,521 105,156 105,888 106,195 0,06891
4 1/2 8 113,848 114,229 111,928 112,166 110,449 114,300 110,871 111,506 112,238 112,547 0,07745
4 3/4 8 120,195 120,576 118,273 118,514 116,797 120,650 117,221 117,856 118,588 118,902 0,08646
5 8 126,545 126,926 124,617 124,864 123,147 127,000 123,571 124,206 124,938 125,258 0,09590
5 1/4 8 132,895 133,276 130,965 131,214 129,497 133,500 129,291 130,556 131,288 131,61 0,10595
5 1/2 8 139,243 139,624 137,310 137,561 135,844 139,700 136,271 136,906 137,638 137,965 0,11648
5 3/4 8 145,593 145,974 143,657 143,911 142,194 146,050 142,621 143,256 143,988 144,318 0,12713
6 8 151,943 152,324 150,002 150,261 148,544 152,400 148,971 149,606 150,338 150,673 0,13860
NOTE: Dimensions in mm
THREADING SPECIFICATIONSFASTENERS12.5
197
FASTENERSDIMENSIONS 12.6
STUDBOLT DIMENSIONS FOR ALL FLANGE TYPES
STUDBOLT LENGTHS FOR FLANGES TO ASME B. 16.5
Rating 150 300 600
Nom.Size N°
Dia. LengthN°
Dia. LengthN°
Dia. Length
STUD RF RTJ STUD RF RTJ STUD RF RTJ
1/2 4 1/2 2 1/4 4 1/2 2 1/2 3 4 1/2 3 3
M14 65 M14 70 80 M14 80 80
3/4 4 1/2 2 1/2 4 5/8 3 3 1/2 4 5/8 3 1/2 3 1/2
M14 70 M16 80 95 M16 95 95
1 4 1/2 2 1/2 3 4 5/8 3 3 1/2 4 5/8 3 1/2 3 1/2
M14 70 80 M16 80 95 M16 95 95
1 1/4 4 1/2 2 3/4 3 1/4 4 5/8 3 1/4 3 3/4 4 5/8 3 3/4 3 3/4
M14 75 90 M16 90 100 M16 100 100
1 1/2 4 1/2 2 3/4 3 1/4 4 3/4 3 1/2 4 4 3/4 4 1/4 4 1/4
M14 75 90 M20 95 105 M20 115 115
2 4 5/8 3 1/4 3 3/4 8 5/8 3 1/2 4 8 5/8 4 1/4 4 1/4
M16 90 100 M16 95 105 M16 115 115
2 1/2 4 5/8 3 1/2 4 8 3/4 4 4 1/2 8 3/4 4 3/4 4 3/4
M16 95 105 M20 105 120 M20 125 125
3 4 5/8 3 1/2 4 8 3/4 4 1/4 4 3/4 8 3/4 5 5
M16 95 105 M20 115 125 M20 135 130
4 8 5/8 3 1/2 4 8 3/4 4 1/4 5 8 7/8 5 3/4 5 3/4
M16 95 105 M20 120 135 M22 150 150
5 8 3/4 3 3/4 4 1/4 8 3/4 4 3/4 5 1/4 8 1 6 1/2 6 1/2
M20 100 115 M20 125 140 M27 170 170
6 8 3/4 4 4 1/2 12 3/4 4 3/4 5 1/2 12 1 6 3/4 6 3/4
M20 105 120 M20 125 145 M27 180 180
8 8 3/4 4 1/4 4 3/4 12 7/8 5 1/2 6 12 1 1/8 7 1/2 7 3/4
M20 115 125 M22 145 160 M30 200 205
10 12 7/8 4 1/2 5 16 1 6 1/4 6 3/4 16 1 1/4 8 1/2 8 1/2
M22 120 135 M27 165 180 M33 225 225
12 12 7/8 4 3/4 5 1/4 16 1 1/8 6 3/4 7 1/4 20 1 1/4 8 3/4 8 3/4
M22 125 140 M30 180 190 M33 235 235
14 12 1 5 1/4 5 3/4 20 1 1/8 7 7 1/2 20 1 3/8 9 1/4 9 1/4
M27 140 155 M30 185 200 M36 245 245
16 12 1 5 1/4 5 3/4 20 1 1/4 7 1/2 8 20 1 1/2 10 10
M27 140 155 M33 200 215 M39 265 265
18 12 1 1/8 5 3/4 6 1/4 24 1 1/4 7 3/4 8 1/4 20 1 5/8 10 3/4 10 3/4
M30 155 165 M33 205 220 M42 285 285
20 12 1 1/8 6 1/4 6 3/4 24 1 1/4 8 8 3/4 24 1 5/8 11 1/4 11 1/2
M30 165 180 M33 215 235 M42 295 305
24 12 1 1/4 6 3/4 7 1/4 24 1 1/2 9 10 24 1 7/8 13 13 1/4
M33 180 190 M39 240 265 M48 340 345
198
STUDBOLT DIMENSIONS FOR ALL FLANGE TYPES
STUDBOLT LENGTHS FOR FLANGES TO ASME B. 16.5
Rating 900 1500 2500
Nom.Size N°
Dia. LengthN°
Dia. LengthN°
Dia. Length
STUD RF RTJ STUD RF RTJ STUD RF RTJ
1/2 4 3/4 4 1/2 4 1/4 4 3/4 4 1/2 4 1/2 4 3/4 4 3/4 4 3/4
M20 115 1154 M20 115 115 M20 125 125
3/4 4 3/4 4 1/2 4 1/2 4 3/4 4 1/2 4 1/2 4 3/4 5 5
M20 120 120 M20 120 120 M20 135 135
1 4 7/8 5 2 4 7/8 5 5 4 7/8 5 1/2 5 1/2
M22 135 135 M22 135 135 M22 145 145
1 1/4 4 7/8 5 5 4 7/8 5 5 4 1 6 6
M22 135 135 M22 135 135 M27 160 160
1 1/2 4 1 5 1/2 5 1/2 4 1 5 1/2 5 1/2 4 1 1/8 5 3/4 5 3/4
M27 145 145 M27 145 145 M30 180 180
2 8 7/8 5 3/4 5 3/4 8 7/8 5 3/4 5 3/4 8 1 7 7
M22 150 150 M22 150 150 M27 185 185
2 1/2 8 1 6 1/4 6 1/4 8 1 6 1/4 6 1/4 8 1 1/8 7 3/4 8
M27 165 165 M27 165 165 M30 205 215
3 8 7/8 5 3/4 5 3/4 8 1 1/8 7 7 8 1 1/4 8 3/4 9
M22 150 150 M30 185 185 M33 235 240
4 8 1 1/8 6 3/4 6 3/4 8 1 1/4 7 3/4 7 3/4 8 1 1/2 10 10 1/4
M30 180 180 M33 205 205 M39 265 270
5 8 1 1/4 7 1/2 7 1/2 8 1 1/2 9 3/4 9 3/4 8 1 3/4 11 3/4 12 1/4
M33 200 200 M39 260 260 M45 310 320
6 12 1 1/8 7 1/2 7 3/4 12 1 3/8 10 1/4 10 1/2 8 2 13 1/2 14
M30 200 205 M36 270 280 M52 355 365
8 12 1 3/8 8 3/4 8 3/4 12 1 5/8 11 1/2 12 3/4 12 2 15 15 1/2
M36 235 235 M42 305 335 M52 390 405
10 16 1 3/8 9 1/4 9 1/4 12 1 7/8 13 1/4 13 1/2 12 2 1/2 19 1/4 20
M36 245 245 M48 350 355 M64 500 520
12 20 1 3/8 10 10 16 2 14 3/4 15 1/4 12 2 3/4 21 1/4 22
M36 265 265 M52 385 400 M68 550 570
14 20 1 1/2 10 3/4 11 16 2 1/4 16 16 3/4
M39 285 290 M56 415 435
16 20 1 5/8 11 1/4 11 1/2 16 2 1/2 17 1/2 18 1/2
M42 295 305 M64 455 480
18 20 1 7/8 12 3/4 13 1/4 16 2 3/4 19 1/2 20 3/4
M48 335 350 M68 505 540
20 20 2 13 3/4 14 1/4 16 3 21 1/4 22 1/4
M52 360 375 M76 550 575
24 20 2 1/2 17 1/4 18 16 3 1/2 24 1/4 25 1/2
M64 450 470 M80 625 660
NOTE: The original ASME standard should be consulted
DIMENSIONSFASTENERS12.6
199
FASTENERSDIMENSIONS 12.6
STUDBOLT DIMENSIONS FOR ALL FLANGE TYPES
STUDBOLT LENGTHS FOR FLANGES TO ASME B. 16.47 SERIES A
Rating 150 300 600 900
Nom.Size N°
Dia. LengthN°
Dia. LengthN°
Dia. LengthN°
Dia. Length
STUD RF STUD RF RTJ STUD RF RTJ STUD RF RTJ
26 24 1 1/4 8 3/4 28 1 5/8 11 12 28 1 7/8 15 1/4 15 1/4 20 2 3/4 19 3/4 20 3/4
M33 235 M42 290 315 M48 400 410 M68 515 540
28 28 1 1/4 9 28 1 5/8 11 1/2 12 1/2 28 2 16 16 1/2 20 3 21 1/4 22 1/4
M33 240 M42 305 330 M52 420 430 M76 550 575
30 28 1 1/4 9 1/4 28 1 3/4 12 13 28 2 16 1/2 17 20 3 22 23
M33 245 M45 315 340 M52 430 445 M76 570 595
32 28 1 1/2 10 1/2 28 1 7/8 12 3/4 14 28 2 1/4 17 3/4 18 1/2 20 3 1/4 23 1/2 24 1/4
M39 280 M48 335 370 M56 465 480 M80 610 625
34 32 1 1/2 10 1/2 28 1 7/8 13 14 1/4 28 2 1/4 18 1/4 19 20 3 1/2 24 3/4 26
M39 280 M48 345 375 M56 475 495 M90 640 670
36 32 1 1/2 11 1/4 32 2 14 15 32 2 1/4 19 1/2 20 1/4 20 3 1/2 25 3/4 26 3/4
M39 300 M52 370 394,6 M56 505 525 M90 665 690
38 32 1 1/2 11 32 1 1/2 12 1/2 32 2 1/4 18 1/2 20 3 1/2 25 3/4
M39 290 M39 330 M56 480 M90 665
40 36 1 1/2 11 1/4 32 1 5/8 13 1/4 32 2 1/4 19 20 3 1/2 26 1/4
M39 300 M42 350 M56 495 M90 680
42 36 1 1/2 11 3/4 32 1 5/8 13 3/4 32 2 1/2 20 1/4 24 3 1/2 27
M39 310 M42 360 M64 525 M90 695
44 40 1 1/2 12 32 1 3/4 14 1/2 32 2 1/2 20 3/4 24 3 3/4 28 1/4
M39 315 M45 380 M64 540 M95 730
46 40 1 1/2 12 1/4 28 1 7/8 15 36 2 1/2 21 1/4 24 4 29 3/4
M39 325 M48 395 M64 550 M100 765
48 44 1 1/2 12 1/2 32 2 15 1/4 28 2 3/4 22 3/4 24 4 30 1/2
M39 330 M52 400 M68 590 M100 785
50 44 1 3/4 13 1/2 32 2 16 32 3 23 3/4
M45 355 M52 420 M72 615
52 44 1 3/4 13 3/4 32 2 1/4 16 1/2 32 3 24 1/4
M45 360 M56 430 M72 625
54 44 1 3/4 14 28 2 1/4 17 1/2 28 3 24 3/4
M45 370 M56 455 M72 640
56 48 1 3/4 14 1/2 28 2 1/4 17 3/4 32 3 1/4 26
M45 380 M56 465 M80 670
58 48 1 3/4 14 3/4 32 2 1/4 18 32 3 1/4 26 1/2
M45 385 M56 470 M80 685
60 52 1 3/4 15 32 2 1/4 18 1/2 32 3 1/2 27 3/4
M45 395 M56 480 M90 715
NOTE: The original ASME standard should be consulted
200
STUDBOLT DIMENSIONS FOR ALL FLANGE TYPES
STUDBOLT LENGTHS FOR FLANGES TO ASME B. 16.47 SERIES B
Rating 150 300 600 900
Nom.Size N°
Dia. LengthN°
Dia. LengthN°
Dia. LengthN°
Dia. Length
STUD RF STUD RF RTJ STUD RF RTJ STUD RF RTJ
26 36 3/4 5 3/4 32 1 1/4 10 1/2 11 1/2 28 1 5/8 13 3/4 14 1/4 20 2 1/2 18 3/4 19 3/4
M20 150 M33 280 305 M42 360 375 M64 485 515
28 40 3/4 6 36 1 1/4 10 1/2 11 1/2 28 1 3/4 14 1/4 14 3/4 20 2 3/4 20 1/4 21 1/4
M20 160 M33 280 305 M45 375 385 M68 252 550
30 44 3/4 6 1/2 36 1 3/8 11 1/4 12 1/4 28 1 7/8 15 1/4 15 3/4 20 3 21 1/2 22 1/2
M20 170 M36 295 325 M48 400 410 M76 560 585
32 48 3/4 6 3/4 32 1 1/2 12 1/4 13 1/4 28 2 16 1/4 16 3/4 20 3 22 1/4 23 1/2
M20 175 M39 320 350 M52 425 435 M76 575 610
34 40 7/8 7 1/4 36 1 1/2 12 2/5 13 1/4 24 2 1/4 17 1/2 18 20 3 1/4 23 1/2 24 3/4
M22 190 M39 320 350 M56 455 470 M80 610 640
36 44 7/8 7 1/4 32 1 5/8 12 1/2 13 1/2 28 2 1/4 18 18 3/4 24 3 23 3/4 24 3/4
M22 190 M42 330 355 M56 470 490 M76 615 640
38 40 1 8 36 1 5/8 13 1/4
M27 210 M42 350
40 44 1 8 1/4 40 1 5/8 13 1/2
M27 215 M42 355
42 48 1 8 1/4 36 1 3/4 14
M27 215 M45 365
44 52 1 8 1/2 40 1 3/4 14 1/2
M27 220 M45 380
46 40 1 1/8 9 36 1 7/8 15
M30 240 M48 390
48 44 1 1/8 9 1/2 40 1 7/8 15 1/2
M30 250 M48 405
50 48 1 1/8 9 3/4 44 1 7/8 15 3/4
M30 260 M48 410
52 52 1 1/8 10 48 1 7/8 16 1/4
M30 265 M48 425
54 56 1 1/8 10 1/4 48 1 7/8 16 3/4
M30 270 M48 435
56 60 1 1/8 10 1/2 36 2 1/4 18
M30 280 M56 470
58 48 1 1/4 11 40 2 1/4 18 1/2
M33 290 M56 480
60 52 1 1/4 11 1/4 40 2 1/4 18 3/4
M33 295 M56 485
NOTE: Dimensions for classes 600 and 900 NPS 38” and larger for series B flanges a e the same as for series A flangesThe original ASME standard should be consulted
DIMENSIONSFASTENERS12.6
201
FASTENERSWEIGHT 12.7
WEIGHT TABLES
HEAVY HEX NUTS and HEAVY HEX JAM NUTSWeight Nuts (Kg./1000 pieces)
Nom. Size
HEAVY REGULARHEX HEX JAM HEX HEX JAM
1/4 5,40 2,80 3,30 2,305/16 8,20 5,90 5,00 3,503/8 14,90 11,00 7,20 4,70
7/16 20,00 15,60 12,90 8,501/2 31,40 21,80 17,00 12,00
9/16 39,30 28,10 26,40 16,805/8 50,30 42,70 33,20 22,503/4 88,00 79,70 53,90 34,807/8 129,00 103,00 86,10 54,501 184,00 162,00 128,00 79,90
1 1/8 254,00 225,00 172,00 106,101 1/4 330,30 264,00 241,00 160,701 3/8 431,30 322,00 298,00 195,801 1/2 550,00 417,00 401,00 260,201 5/8 713,40 546,00 - -1 3/4 858,90 675,00 - -1 7/8 1052,30 639,00 - -
2 1290,00 989,00 - -2 1/4 1818,20 1088,00 - -2 1/2 2497,00 1575,00 - -2 3/4 3175,00 2019,00 - -
3 3920,00 2570,00 - -3 1/4 4860,00 3190,00 - -3 1/2 6420,00 4005,00 - -3 3/4 8175,00 4802,00 - -
4 10350,00 5722,00 - -4 1/4 11320,00 - - -4 1/2 13920,00 - - -4 3/4 16370,00 - - -
5 18540,00 - - -5 1/4 22363,00 - - -5 1/2 26500,00 - - -5 3/4 27920,10 - - -
6 31528,00 - - -- - - - -
WASHERS - WEIGHT TABLE
Nom. Size Kg. / 1000 pcs. Nom. Size Kg. / 1000 pcs. Nom. Size Kg. / 1000 pcs.
M 6 1/4 1,1 - - - - - -M 7 - 1,4 M 27 1 - 42,3 M 60 458M 8 5/16 2,2 M 30 1 1/8 53,6 M 64 2 1/2 492
M 10 3/8 4,1 M 33 1 1/4 75,3 M 68 - 586M 12 7/16 6,3 M 36 1 3/8 92,1 M 72 2 3/4 626M 14 1/2 8,6 M 39 1 1/2 133 M 76 3 749M 16 9/16-5/8 11,3 M 42 1 5/8 183 M 80 - 953M 18 - 14,7 M 45 1 3/4 220 M 85 3 1/4 983M 20 3/4 17,2 M 48 1 7/8 294 M 90 3 1/2 1250M 22 4/8 18,3 M 52 2 330 M 95 3 3/4 1290M 24 - 32,3 M 56 2 1/4 425 M 100 4 1710
HEX METRIC NUTS Weight Nuts (Kg./1000 pieces)
DIA DIN 934 H=D DIN 934 DIN 936
M 6 2,75 - -M 8 5,65 4,59 3,47
M 10 12,55 10,04 7,67M 12 18,11 15,09 11,64M 14 29,95 23,53 17,63M 16 37,40 30,39 23,00M 18 52,18 43,48 33,16M 20 73,43 58,74 43,76M 22 87,96 71,97 54,06M 24 124,23 98,35 73,30M 27 177,0 144,25 108,58M 30 252,8 202,24 153,03M 33 328,0 258,42 196,40M 36 445,2 358,63 271,08M 39 588,5 467,78 354,91M 42 729,8 590,79 450,04M 45 941,0 752,80 575,06M 48 1135,4 898,86 688,34M 52 1393,0 1125,1 865,27M 56 1646,0 1322,7 -M 60 1968,8 1575,0 -M 64 2282,7 1819,0 -M 68 2710,0 2300,0 -M 72 3217,0 2670,0 -M 76 3700,0 3040,0 -M 80 4300,0 3440,0 -M 85 4920,0 3930,0 -M 90 6170,0 4930,0 -M 95 7000,0 5380,0 -
M 100 8600,0 6820,0 -M 105 9400,0 7400,0 -M 110 10100,0 8100,0 -M 115 12230,0 10000,0 -M 120 13300,0 11600,0 -M 125 15680,0 12700,0 -M 130 16910,0 13650,0 -M 135 18700,0 14950,0 -M 140 21700,0 17350,0 -M 145 25450,0 20350,0 -M 150 24750,0 19800,0 -
NOTE: All weights in this section are based on approxemate weights for steel. Titanium weights can be calculated as 57% of the table values.
202
WEIGHT TABLES
WEIGHT TABLE - STUDBOLTS WITHOUT NUTS - ASME TYPE (Kg./Piece)
L 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/3 1 1/2
25 0,011 0,015 - - - - - - - - - -30 0,013 0,018 - - - - - - - - - -35 0,015 0,021 - - - - - - - - - -40 0,018 0,024 0,032 - - - - - - - - -45 0,02 0,027 0,036 - - - - - - - - -50 0,022 0,030 0,040 0,051 0,063 0,092 0,127 0,166 0,215 - - -55 0,024 0,033 0,044 0,056 0,069 0,101 0,139 0,183 0,236 - - -60 0,026 0,036 0,048 0,061 0,076 0,111 0,152 0,199 0,258 - - -65 0,029 0,039 0,052 0,066 0,082 0,129 0,165 0,216 0,279 - - -70 0,031 0,042 0,056 0,071 0,088 0,138 0,177 0,233 0,301 - - -75 0,033 0,045 0,060 0,076 0,094 0,147 0,190 0,249 0,322 - - -80 0,035 0,048 0,063 0,081 0,101 0,157 0,203 0,266 0,343 0,431 0,529 -85 0,037 0,051 0,067 0,086 0,107 0,166 0,215 0,283 0,365 0,458 0,562 -90 0,040 0,054 0,071 0,092 0,113 0,175 0,228 0,299 0,386 0,485 0,595 -95 0,042 0,057 0,075 0,097 0,120 0,184 0,241 0,316 0,408 0,512 0,628 -100 0,044 0,060 0,079 0,102 0,126 0,194 0,253 0,332 0,429 0,539 0,661 -105 0,046 0,063 0,083 0,107 0,132 0,203 0,266 0,349 0,451 0,566 0,694 -110 0,048 0,066 0,087 0,112 0,139 0,212 0,279 0,366 0,472 0,593 0,727 -115 0,051 0,069 0,091 0,117 0,145 0,221 0,291 0,382 0,494 0,619 0,760 -120 - 0,072 0,095 0,122 0,151 0,230 0,304 0,399 0,515 0,646 0,793 0,954125 - 0,075 0,099 0,127 0,157 0,240 0,317 0,416 0,537 0,673 0,826 0,993130 - 0,078 0,103 0,132 0,164 0,249 0,329 0,432 0,558 0,700 0,859 1,033135 - - 0,107 0,137 0,170 0,258 0,342 0,449 0,580 0,727 0,892 1,073140 - - 0,111 0,142 0,176 0,267 0,355 0,465 0,601 0,754 0,925 1,113145 - - 0,115 0,147 0,183 0,277 0,367 0,482 0,623 0,781 0,958 1,152150 - - 0,119 0,153 0,189 0,286 0,380 0,499 0,644 0,808 0,991 1,192155 - - - - 0,195 0,295 0,393 0,515 0,665 0,835 1,024 1,232160 - - - - 0,202 0,304 0,405 0,532 0,687 0,862 1,057 1,272165 - - - - 0,208 0,313 0,418 0,548 0,708 0,889 1,090 1,311170 - - - - 0,214 0,323 0,431 0,565 0,730 0,916 1,123 1,351175 - - - - 0,220 0,332 0,443 0,582 0,751 0,943 1,156 1,391180 - - - - 0,227 0,456 0,598 0,773 0,970 1,189 1,431185 - - - - - - 0,469 0,615 0,794 0,996 1,222 1,470190 - - - - - - 0,481 0,632 0,816 1,023 1,255 1,510195 - - - - - - 0,494 0,648 0,837 1,050 1,288 1,550200 - - - - - - 0,507 0,665 0,859 1,077 1,321 1,590205 - - - - - - - 0,681 0,880 1,104 1,354 1,629210 - - - - - - - 0,698 0,902 1,131 1,387 1,669215 - - - - - - - 0,715 0,923 1,158 1,4214 1,709220 - - - - - - - 0,731 0,945 1,185 1,454 1,749225 - - - - - - - 0,748 0,966 1,212 1,487 1,788230 - - - - - - - 0,765 0,989 1,239 1,520 1,828235 - - - - - - - 0,781 1,009 1,266 1,553 1,868240 - - - - - - - 0,798 1,030 1,293 1,586 1,908245 - - - - - - - - - 1,320 1,619 1,947250 - - - - - - - - - 1,347 1,652 1,987255 - - - - - - - - - 1,373 1,685 2,027260 - - - - - - - - - 1,400 1,718 2,066265 - - - - - - - - - 1,427 1,751 2,106270 - - - - - - - - - 1,454 1,784 2,146275 - - - - - - - - - - 1,817 2,186280 - - - - - - - - - - 1,85 2,225285 - - - - - - - - - - 1,883 2,265290 - - - - - - - - - - - 2,305295 - - - - - - - - - - - 2,345300 - - - - - - - - - - - 2,384305 - - - - - - - - - - - 2,424310 - - - - - - - - - - - 2,464315 - - - - - - - - - - - 2,504
WEIGHTFASTENERS12.7
203
FASTENERSWEIGHT 12.7
WEIGHT TABLES
WEIGHT TABLE - STUDBOLTS WITHOUT NUTS - ASME TYPE (Kg./Piece)
L 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/3 1 1/2
120 1,129 1,320 1,526 1,746 2,232 - - - - - - -125 1,176 1,374 1,589 1,819 2,325 - - - - - - -130 1,223 1,429 1,653 1,891 2,418 - - - - - - -135 1,270 1,484 1,716 1,964 2,511 3,125 3,806 4,554 - - - -140 1,317 1,539 1,780 2,037 2,604 3,241 3,947 4,723 - - - -145 1,364 1,594 1,843 2,110 2,697 3,356 4,088 4,891 - - - -150 1,411 1,649 1,907 2,182 2,790 3,472 4,229 5,060 5,967 6,946 8,000 9,129155 1,458 1,704 1,971 2,255 2,883 3,588 4,370 5,228 6,166 7,177 8,267 9,434160 1,505 1,759 2,034 2,328 2,976 3,704 4,511 5,397 6,365 7,409 8,534 9,738165 1,552 1,814 2,098 2,401 3,069 3,819 4,652 5,566 6,564 7,640 8,800 10,042170 1,599 1,869 2,161 2,473 3,162 3,935 4,793 5,734 6,763 7,872 9,067 10,347175 1,646 1,924 2,225 2,546 3,255 4,051 4,933 5,903 6,961 8,103 9,334 10,651180 1,693 1,979 2,288 2,619 3,348 4,167 5,074 6,072 7,160 8,335 9,600 10,955185 1,740 2,034 2,352 2,692 3,441 4,282 5,215 6,240 7,359 8,566 9,867 11,260190 1,787 2,089 2,416 2,764 3,534 4,398 5,356 6,409 7,558 8,798 10,134 11,564195 1,835 2,144 2,478 2,837 3,627 4,514 5,497 6,578 7,757 9,029 10,400 11,868200 1,882 2,199 2,543 2,910 3,720 4,629 5,638 6,746 7,956 9,261 10,667 12,173205 1,929 2,254 2,606 2,983 3,813 4,745 5,779 6,915 8,155 9,492 10,934 12,477210 1,976 2,309 2,670 3,055 3,906 4,861 5,920 7,084 8,354 9,724 11,200 12,781215 2,023 2,364 2,733 3,128 3,999 4,977 6,061 7,252 8,553 9,955 11,467 13,086220 1,070 2,419 2,797 3,201 4,092 5,092 6,202 7,421 8,752 10,187 11,734 13,390225 2,117 2,474 2,861 3,274 4,185 5,208 6,343 7,590 8,950 10,418 12,000 13,694230 2,164 2,529 2,924 3,346 4,278 5,324 6,484 7,758 9,146 10,650 12,267 13,998235 2,211 2,584 2,988 3,419 4,371 5,440 6,625 7,927 9,348 10,881 12,534 14,303240 2,258 2,639 3,051 3,492 4,464 5,555 6,766 8,096 9,547 11,113 12,800 14,607245 2,305 2,694 3,115 3,565 4,557 5,671 6,907 8,264 9,746 11,344 13,067 14,911250 2,352 2,749 3,178 3,637 4,650 5,787 7,048 8,433 9,945 11,576 13,334 15,216255 2,399 2,804 3,242 3,710 4,743 5,903 7,189 8,602 10,144 11,808 13,600 15,520260 2,446 2,859 3,306 3,783 4,836 6,018 7,330 8,770 10,343 12,039 13,867 15,824265 2,493 2,914 3,369 3,856 4,929 6,134 7,471 8,939 10,542 12,271 14,134 16,129270 2,540 2,969 3,433 3,928 5,022 6,250 7,612 9,108 10,740 12,502 14,400 16,433275 2,587 3,024 3,496 4,001 5,115 6,366 7,753 9,276 10,939 12,734 14,667 16,737280 2,634 3,079 3,560 4,074 5,208 6,481 7,894 9,445 11,138 12,965 14,934 17,042285 2,681 3,134 3,623 4,147 5,301 6,597 8,035 9,614 11,337 13,197 15,201 17,346290 2,728 3,189 3,687 4,219 5,394 6,713 8,175 9,782 11,536 13,428 15,467 17,650295 2,775 3,244 3,750 4,292 5,487 6,828 8,316 9,951 11,735 13,660 15,734 17,955300 2,822 3,299 3,814 4,365 5,58 6,944 8,457 10,120 11,934 13,891 16,001 18,259305 2,869 3,354 3,878 4,438 5,673 7,060 8,598 10,288 12,133 14,123 16,267 18,563310 2,916 3,409 3,941 4,510 5,766 7,176 8,739 10,457 12,332 14,354 16,534 18,868315 2,963 3,464 4,005 4,583 5,859 7,291 8,880 10,626 12,531 14,586 16,801 19,172320 3,011 3,519 4,068 4,656 5,952 7,407 9,021 10,794 12,729 14,817 17,067 19,476325 3,058 3,574 4,132 4,729 6,045 7,523 9,162 10,963 12,928 15,049 17,334 19,780330 3,105 3,629 4,195 4,801 6,138 7,639 9,303 11,132 13,127 15,280 17,601 20,085335 3,152 3,684 4,259 4,874 6,231 7,754 9,444 11,300 13,326 15,512 17,867 20,389340 3,199 3,739 4,323 4,947 6,324 7,870 9,585 11,469 13,525 15,743 18,134 20,693345 3,246 3,794 4,386 5,020 6,417 7,986 9,726 11,638 13,724 15,975 18,401 20,998350 3,293 3,849 4,450 5,092 6,510 8,102 9,867 11,806 13,923 16,206 18,667 21,302355 3,340 3,904 4,513 5,165 6,603 8,217 10,008 11,975 14,122 16,438 18,934 21,606360 3,387 3,959 4,577 5,238 6,696 8,333 10,149 12,144 14,321 16,669 19,201 21,911365 3,434 4,014 4,640 5,311 6,789 8,449 10,290 12,312 14,520 16,901 19,467 22,215370 3,481 4,069 4,704 5,383 6,882 8,565 10,431 12,481 14,718 17,132 19,734 22,519375 3,528 4,123 4,768 5,456 6,975 8,680 10,572 12,650 14,917 17,364 20,001 22,824380 3,575 4,178 4,831 5,529 7,068 8,796 10,713 12,818 15,116 17,596 20,267 23,128385 3,622 4,233 4,895 5,602 7,161 8,912 10,854 12,987 15,315 17,827 20,534 23,432390 3,669 4,288 4,958 5,674 7,254 9,027 10,995 13,156 15,514 18,059 20,801 23,737395 3,716 4,343 5,022 5,747 7,347 9,143 11,136 13,324 15,713 18,290 21,067 24,041400 3,763 4,398 5,085 5,820 7,440 9,569 11,277 13,493 15,912 18,522 21,334 24,345405 3,810 4,453 5,149 5,893 7,533 9,375 11,418 13,662 16,111 18,753 21,601 24,650410 3,857 4,508 5,213 5,965 7,626 9,490 11,558 13,830 16,310 18,985 21,867 24,954
204
WEIGHT TABLES
WEIGHT TABLE - STUDBOLTS WITHOUT NUTS - METRIC TYPE (Kg./Piece)
L M 12 M 14 M 16 M 18 M 20 M 22 M 24 M 27 M 30 M 33 M 36 M 39
25 0,018 0,024 - - - - - - - - - -30 0,021 0,029 - - - - - - - - - -35 0,025 0,034 0,046 - - - - - - - - -40 0,029 0,039 0,053 - - - - - - - - -45 0,032 0,044 0,059 - - - - - - - - -50 0,036 0,049 0,066 0,082 0,103 0,127 - - - - - -55 0,039 0,054 0,072 0,090 0,113 0,139 0,163 0,211 0,258 - - -60 0,043 0,059 0,079 0,098 0,124 0,152 0,178 0,230 0,282 - - -65 0,046 0,064 0,085 0,106 0,134 0,165 0,193 0,249 0,305 - - -70 0,050 0,068 0,092 0,115 0,144 0,177 0,208 0,268 0,328 - - -75 0,054 0,073 0,098 0,123 0,155 0,190 0,223 0,288 0,352 - - -80 0,057 0,078 0,105 0,131 0,165 0,203 0,237 0,307 0,375 0,461 0,567 -85 0,061 0,083 0,112 0,139 0,175 0,215 0,252 0,326 0,399 0,490 0,603 -90 0,064 0,088 0,118 0,147 0,186 0,228 0,267 0,345 0,422 0,519 0,638 -95 0,068 0,093 0,125 0,155 0,196 0,241 0,282 0,364 0,446 0,548 0,674 -100 0,071 0,098 0,131 0,164 0,206 0,253 0,297 0,383 0,469 0,577 0,709 -105 0,075 0,103 0,138 0,172 0,217 0,266 0,312 0,403 0,493 0,606 0,745 -110 0,079 0,108 0,144 0,180 0,227 0,279 0,326 0,422 0,516 0,634 0,780 -115 0,082 0,112 0,151 0,188 0,237 0,291 0,341 0,441 0,540 0,663 0,816 -120 0,086 0,117 0,158 0,196 0,248 0,304 0,356 0,460 0,563 0,692 0,851 1,007125 0,089 0,122 0,164 0,205 0,258 0,317 0,371 0,479 0,587 0,721 0,886 1,048130 - 0,127 0,171 0,213 0,268 0,329 0,386 0,499 0,610 0,750 0,922 1,090135 - - 0,177 0,221 0,278 0,342 0,401 0,518 0,633 0,779 0,957 1,132140 - - 0,184 0,229 0,289 0,355 0,416 0,537 0,657 0,808 0,993 1,174145 - - - 0,237 0,299 0,367 0,430 0,556 0,680 0,836 1,028 1,216150 - - - 0,245 0,309 0,380 0,445 0,575 0,704 0,865 1,064 1,258155 - - - 0,254 0,320 0,393 0,460 0,594 0,727 0,894 1,099 1,300160 - - - 0,262 0,330 0,405 0,475 0,614 0,751 0,923 1,135 1,342165 - - - 0,270 0,340 0,418 0,490 0,633 0,774 0,952 1,170 1,384170 - - - 0,278 0,351 0,431 0,505 0,652 0,798 0,981 1,206 1,426175 - - - 0,286 0,361 0,443 0,519 0,671 0,821 1,009 1,241 1,468180 - - - 0,295 0,371 0,456 0,534 0,690 0,845 1,038 1,277 1,510185 - - - 0,303 0,382 0,469 0,549 0,709 0,868 1,067 1,312 1,552190 - - - 0,311 0,392 0,481 0,564 0,729 0,892 1,096 1,347 1,594195 - - - 0,319 0,402 0,494 0,579 0,748 0,915 1,125 1,383 1,636200 - - - - 0,413 0,507 0,594 0,757 0,938 1,154 1,418 1,678205 - - - - 0,423 0,519 0,608 0,786 0,962 1,182 1,454 1,719210 - - - - - - - 0,805 0,985 1,211 1,489 1,761215 - - - - - - - 0,824 1,009 1,240 1,525 1,803220 - - - - - - - 0,844 1,032 1,269 1,560 1,845225 - - - - - - - 0,863 1,056 1,298 1,596 1,887230 - - - - - - - 0,882 1,079 1,327 1,631 1,929235 - - - - - - - 0,901 1,103 1,355 1,667 1,971240 - - - - - - - 0,920 1,126 1,384 1,702 2,013245 - - - - - - - - 1,150 1,413 1,737 2,055250 - - - - - - - - 1,173 1,442 1,773 2,097255 - - - - - - - - 1,197 1,471 1,808 2,139260 - - - - - - - - 1,220 1,500 1,844 2,181265 - - - - - - - - 1,243 1,529 1,879 2,223270 - - - - - - - - 1,267 1,557 1,915 2,265275 - - - - - - - - 1,290 1,586 1,950 2,307280 - - - - - - - - - 1,615 1,986 2,349285 - - - - - - - - - 1,644 2,021 2,390290 - - - - - - - - - 1,673 2,057 2,432295 - - - - - - - - - 1,702 2,092 2,474300 - - - - - - - - - 1,730 2,128 2,516305 - - - - - - - - - 1,759 2,163 2,558310 - - - - - - - - - 1,788 2,198 2,600315 - - - - - - - - - 1,817 2,234 2,642
WEIGHTFASTENERS12.7
205
FASTENERSWEIGHT 12.7
WEIGHT TABLES
WEIGHT TABLE - STUDBOLTS WITHOUT NUTS - METRIC TYPE (Kg./Piece)
L M 42 M 45 M 48 M 52 M 56 M 60 M 64 M 68 M 72 M 76 M 80 M 85
120 1,177 1,360 1,557 1,841 2,096 - - - - - - -125 1,226 1,417 1,622 1,917 2,183 - - - - - - -130 1,275 1,474 1,687 1,994 2,271 - - - - - - -135 1,324 1,530 1,752 2,071 2,358 2,727 3,125 3,541 - - - -140 1,373 1,587 1,817 2,147 2,445 2,828 3,241 3,672 - - - -145 1,422 1,644 1,882 2,224 2,533 2,929 3,356 3,803 - - - -150 1,471 1,701 1,947 2,301 2,620 3,030 3,472 3,934 4,431 4,958 5,514 6,251155 1,520 1,757 2,012 2,377 2,707 3,131 3,588 4,065 4,579 5,123 5,698 6,459160 1,569 1,814 2,076 2,454 2,795 3,231 3,704 4,196 4,727 5,288 5,882 6,668165 1,618 1,871 2,141 2,531 2,882 3,332 3,819 4,327 4,874 5,454 6,065 6,876170 1,667 1,927 2,206 2,608 2,969 3,433 3,935 4,459 5,022 5,619 6,249 7,086175 1,716 1,984 2,271 2,684 3,057 3,534 4,051 4,590 5,170 5,784 6,433 7,293180 1,765 2,041 2,336 2,761 3,144 3,635 4,167 4,721 5,317 5,949 6,617 7,501185 1,814 2,097 2,401 2,838 3,231 3,736 4,282 4,852 5,465 6,115 6,801 7,709190 1,863 2,154 2,466 2,914 3,319 3,837 4,398 4,983 5,613 6,280 6,984 7,918195 1,912 2,211 2,531 2,991 3,406 3,938 4,514 5,114 5,760 6,445 7,168 8,126200 1,961 2,267 2,596 3,068 3,493 4,039 4,629 5,245 5,908 6,610 7,352 8,335205 2,010 2,324 2,660 3,144 3,581 4,140 4,745 5,376 6,056 6,776 7,536 8,543210 2,059 2,381 2,725 3,221 3,668 4,241 4,861 5,508 6,204 6,941 7,720 8,751215 2,108 2,437 2,790 3,298 3,755 4,342 4,977 5,639 6,351 7,106 7,903 8,960220 2,157 2,494 2,855 3,374 3,843 4,443 5,092 5,770 6,499 7,271 8,087 9,168225 2,207 2,551 2,920 3,451 3,930 4,544 5,208 5,901 6,647 7,437 8,271 9,376230 2,256 2,607 2,985 3,528 4,017 4,645 5,324 6,032 6,794 7,602 8,455 9,585235 2,305 2,664 3,050 3,605 4,105 4,746 5,440 6,163 6,942 7,767 8,639 9,793240 2,354 2,721 3,115 3,681 4,192 4,847 5,555 6,294 7,090 7,932 8,822 10,001245 2,403 2,778 3,180 3,758 4,279 4,948 5,671 6,426 7,237 8,098 9,006 10,210250 2,452 2,834 3,244 3,835 4,367 5,049 5,787 6,557 7,385 8,263 9,190 10,418255 2,501 2,891 3,309 3,911 4,454 5,150 5,903 6,688 7,533 8,428 9,374 10,627260 2,550 2,948 3,374 3,988 4,541 5,251 6,018 6,819 7,681 8,593 9,558 10,835265 2,599 3,004 3,439 4,065 4,629 5,352 6,134 6,950 7,828 8,759 9,741 11,043270 2,648 3,061 3,504 4,141 4,716 5,453 6,250 7,081 7,976 8,924 9,925 11,252275 2,697 3,118 3,569 6,218 4,803 5,554 6,366 7,212 8,124 9,089 10,109 11,460280 2,746 3,174 3,634 4,295 4,891 5,655 6,481 7,343 8,271 9,255 10,293 11,668285 2,795 3,231 3,699 4,371 4,978 5,756 6,597 7,475 8,419 9,420 10,477 11,877290 2,844 3,288 3,764 4,448 5,065 5,857 6,713 7,606 8,567 9,585 10,660 12,085295 2,893 3,344 3,828 4,525 5,153 5,958 6,828 7,737 8,714 9,750 10,844 12,293300 2,942 3,401 3,893 4,602 5,240 6,059 6,944 7,868 8,862 9,916 11,028 12,502305 2,991 3,458 3,958 4,678 5,327 6,160 7,060 7,999 9,010 10,081 11,212 12,710310 3,040 3,514 4,023 4,755 5,415 6,261 7,176 8,130 9,158 10,246 11,396 12,919315 3,089 3,571 4,088 4,832 5,502 6,362 7,291 8,261 9,305 10,411 11,579 13,127320 3,138 3,628 4,153 4,908 5,589 6,463 7,407 8,393 9,453 10,577 11,763 13,335325 3,187 3,685 4,218 4,985 5,677 6,564 7,523 8,524 9,601 10,742 11,947 13,544330 3,236 3,741 4,283 5,062 5,764 6,665 7,639 8,655 9,748 10,907 12,131 13,752335 3,285 3,798 4,348 5,138 5,851 6,766 7,754 8,786 9,896 11,072 12,315 13,960340 3,334 3,855 4,413 5,215 5,939 6,867 7,870 8,917 10,044 11,238 12,498 14,169345 3,383 3,911 4,477 5,292 6,026 6,968 7,986 9,048 10,192 11,403 12,682 14,377350 3,432 3,968 4,542 5,368 6,113 7,069 8,102 9,179 10,339 11,568 12,866 14,585355 3,481 4,025 4,607 5,445 6,201 7,170 8,217 9,310 10,487 11,733 13,050 14,794360 3,530 4,081 4,672 5,522 6,288 7,271 8,333 9,442 10,635 11,899 13,234 15,002365 3,579 4,138 4,737 5,599 6,375 7,372 8,449 9,573 10,782 12,064 13,417 15,211370 3,629 4,195 4,802 5,675 6,463 7,473 8,565 9,704 10,930 12,229 13,601 15,419375 3,678 4,251 4,867 5,752 6,550 7,574 8,680 9,835 11,078 12,394 13,785 15,627380 3,727 4,308 4,932 6,829 6,637 7,675 8,796 9,966 11,225 12,560 13,969 15,836385 3,776 4,365 4,997 5,905 6,725 7,776 8,912 10,097 11,373 12,725 14,153 16,044390 3,825 4,421 5,061 5,982 6,812 7,877 9,027 10,228 11,521 12,890 14,336 16,252395 3,874 4,478 5,126 6,059 6,899 7,978 9,143 10,360 11,669 13,055 14,520 16,461400 3,923 4,535 5,191 6,135 6,987 8,079 9,259 10,491 11,816 13,221 14,704 16,669405 3,972 4,591 5,256 6,212 7,074 8,180 9,375 10,622 11,964 13,386 14,888 16,877410 4,021 4,648 5,321 6,289 7,161 8,281 9,490 10,753 12,112 13,551 15,072 17,086
206
WEIGHT TABLES
WEIGHT TABLE - STUDBOLTS COMPLETE WITH TWO NUTS - ASME TYPE (Kg./Set)
L 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/3 1 1/2
25 0,041 0,055 - - - - - - - - - -30 0,043 0,058 - - - - - - - - - -35 0,045 0,061 0,090 - - - - - - - - -40 0,048 0,064 0,094 0,119 0,151 - - - - - - -45 0,050 0,067 0,098 0,124 0,157 0,259 - - - - - -50 0,052 0,070 0,102 0,129 0,164 0,268 0,385 0,534 0,723 - - -55 0,054 0,073 0,106 0,134 0,170 0,277 0,397 0,551 0,744 - - -60 0,056 0,076 0,110 0,139 0,176 0,287 0,410 0,567 0,766 - - -65 0,059 0,079 0,114 0,144 0,182 0,296 0,423 0,584 0,787 - - -70 0,061 0,082 0,118 0,149 0,189 0,305 0,435 0,601 0,809 - - -75 0,063 0,085 0,122 0,154 0,195 0,314 0,448 0,617 0,830 - - -80 0,065 0,088 0,125 0,159 0,201 0,323 0,461 0,634 0,851 1,019 - -85 0,067 0,091 0,129 0,164 0,208 0,333 0,473 0,651 0,873 1,118 - -90 0,070 0,094 0,133 0,170 0,214 0,342 0,486 0,667 0,894 1,145 - -95 0,072 0,097 0,137 0,175 0,220 0,351 0,499 0,684 0,916 1,172 - -100 0,074 0,100 0,141 0,180 0,227 0,360 0,511 0,700 0,937 1,199 1,523 -105 0,076 0,103 0,145 0,185 0,233 0,370 0,524 0,717 0,959 1,226 1,556 -110 0,078 0,106 0,149 0,190 0,239 0,379 0,537 0,734 0,980 1,252 1,589 1,974115 0,081 0,109 0,153 0,195 0,245 0,388 0,549 0,750 1,002 1,279 1,622 2,014120 - 0,112 0,157 0,200 0,252 0,397 0,562 0,767 1,023 1,306 1,655 2,054125 - 0,115 0,161 0,205 0,258 0,406 0,575 0,784 1,045 1,333 1,688 2,093130 - 0,118 0,165 0,210 0,264 0,416 0,587 0,800 1,066 1,360 1,721 2,133135 - - 0,169 0,215 0,271 0,425 0,600 0,817 1,088 1,387 1,754 2,173140 - - 0,173 0,220 0,277 0,434 0,613 0,833 1,109 1,414 1,787 2,213145 - - - 0,225 0,283 0,443 0,625 0,850 1,131 1,441 1,820 2,252150 - - - 0,231 0,290 0,453 0,638 0,867 1,152 1,468 1,853 2,292155 - - - - 0,296 0,462 0,651 0,883 1,173 1,495 1,886 2,332160 - - - - 0,302 0,471 0,663 0,900 1,195 1,522 1,919 2,372165 - - - - - 0,480 0,676 0,916 1,216 1,549 1,952 2,411170 - - - - - 0,489 0,689 0,933 1,238 1,576 1,985 2,451175 - - - - - 0,499 0,701 0,950 1,259 1,603 2,018 2,491180 - - - - - 0,508 0,714 0,966 1,281 1,630 2,051 2,531185 - - - - - - 0,727 0,983 1,302 1,656 2,084 2,570190 - - - - - - 0,739 1,000 1,324 1,683 2,117 2,610195 - - - - - - 0,752 1,016 1,345 1,710 2,150 2,650200 - - - - - - 0,765 1,033 1,367 1,737 2,183 2,690205 - - - - - - 0,777 1,049 1,388 1,764 2,216 2,729210 - - - - - - 0,790 1,066 1,410 1,791 2,249 2,769215 - - - - - - 0,803 1,083 1,431 1,818 2,283 2,809220 - - - - - - 0,815 1,099 1,453 1,845 2,316 2,849225 - - - - - - 0,828 1,116 1,474 1,872 2,349 2,888230 - - - - - - 0,841 1,133 1,495 1,899 2,382 2,928235 - - - - - - 0,853 1,149 1,517 1,926 2,415 2,968240 - - - - - - 0,866 1,166 1,538 1,953 2,448 3,008245 - - - - - - 0,879 1,182 1,560 1,980 2,481 3,047250 - - - - - - 0,891 1,199 1,581 2,007 2,514 3,087255 - - - - - - 0,904 1,216 1,603 2,033 2,547 3,127260 - - - - - - - 1,232 1,624 2,060 2,580 3,166265 - - - - - - - 1,249 1,646 2,087 2,613 3,206270 - - - - - - - 1,266 1,667 2,114 2,646 3,246275 - - - - - - - - 1,689 2,141 2,679 3,286280 - - - - - - - - 1,710 2,168 2,712 3,325285 - - - - - - - - 1,732 2,195 2,745 3,365290 - - - - - - - - 1,753 2,222 2,778 3,405295 - - - - - - - - - 2,249 2,811 3,445300 - - - - - - - - - 2,276 2,844 3,484305 - - - - - - - - - 2,303 2,877 3,524310 - - - - - - - - - 2,330 2,910 3,564315 - - - - - - - - - - 2,943 3,604
WEIGHTFASTENERS12.7
207
FASTENERSWEIGHT 12.7
WEIGHT TABLES
WEIGHT TABLE - STUDBOLTS COMPLETE WITH TWO NUTS - ASME TYPE (Kg./Set)
L 1 5/8 1 3/4 1 7/8 2 2 1/4 2 1/2 2 3/4 3 3 1/4 3 1/2 3 3/4 4
120 2,555 3,038 3,630 4,326 5,868 - - - - - - -125 2,602 3,092 3,693 4,399 5,961 - - - - - - -130 2,649 3,147 3,757 4,471 6,054 - - - - - - -135 2,696 3,202 3,820 4,544 6,147 8,119 10,16 12,39 - - - -140 2,743 3,257 3,884 4,617 6,240 8,235 10,30 12,56 - - - -145 2,780 3,312 3,847 4,690 6,333 8,350 10,44 12,73 - - - -150 2,837 3,367 4,011 4,762 6,426 8,466 10,58 12,90 15,69 19,79 23,62 28,67155 2,884 3,422 4,075 4,835 6,519 8,582 10,72 13,07 15,89 20,02 23,89 28,97160 2,931 3,477 4,138 4,908 6,612 8,698 10,86 13,24 16,08 20,25 24,15 29,28165 2,978 3,532 4,202 4,981 6,705 8,813 11,00 13,41 16,28 20,48 24,42 29,58170 3,025 3,587 4,265 5,053 6,798 8,929 11,14 13,57 16,48 20,71 24,69 29,89175 3,072 3,642 4,329 5,126 6,891 9,045 11,28 13,74 16,68 20,94 24,95 30,19180 3,119 3,697 4,392 5,199 6,984 9,161 11,42 13,91 16,88 21,17 25,22 30,50185 3,166 3,752 4,456 5,272 7,077 9,276 11,57 14,08 17,08 21,41 25,49 30,80190 3,213 3,807 4,520 5,344 7,170 9,392 11,71 14,25 17,28 21,64 25,75 31,10195 3,261 3,862 4,583 5,417 7,263 9,508 11,85 14,42 17,48 21,87 26,02 31,41200 3,308 3,917 4,647 5,490 7,356 9,623 11,99 14,59 17,68 22,10 26,29 31,71205 3,355 3,972 4,710 5,563 7,449 9,739 12,13 14,76 17,87 22,33 26,55 32,02210 3,402 4,027 4,774 5,635 7,542 9,855 12,27 14,92 18,07 22,56 26,82 32,32215 3,449 4,082 4,837 5,708 7,635 9,971 12,41 15,09 18,27 22,80 27,09 32,63220 3,496 4,137 4,901 5,781 7,728 10,09 12,55 15,26 18,47 23,03 27,35 32,93225 3,534 4,192 4,965 5,854 7,821 10,20 12,69 15,43 18,67 23,26 27,62 33,23230 3,590 4,247 5,028 5,926 7,914 10,32 12,83 15,60 18,87 23,49 27,89 33,54235 3,637 4,302 5,092 5,999 8,007 10,43 12,97 15,77 19,07 23,72 28,15 33,84240 3,684 4,357 5,155 6,072 8,100 10,55 13,12 15,94 19,27 23,95 28,42 34,15245 3,731 4,412 5,219 6,145 8,193 10,67 13,26 16,10 19,47 24,18 28,69 34,45250 3,778 4,467 5,282 6,217 8,286 10,78 13,40 16,27 19,66 24,42 28,95 34,76255 3,825 4,522 5,346 6,290 8,379 10,90 13,54 16,44 19,86 24,65 29,22 35,06260 3,872 4,577 5,410 6,363 8,472 11,01 13,68 16,61 20,06 24,88 29,49 35,36265 3,919 4,632 5,473 6,436 8,565 11,13 13,82 16,78 20,26 25,11 29,75 35,67270 3,966 4,687 5,537 6,508 8,658 11,24 13,96 16,95 20,46 25,34 30,02 35,97275 4,013 4,742 5,600 6,581 8,751 11,36 14,10 17,12 20,66 25,57 30,29 36,28280 4,060 4,797 5,664 6,654 8,844 11,48 14,24 17,29 20,86 25,81 30,55 36,58285 4,107 4,852 5,727 6,727 8,937 11,59 14,38 17,45 21,06 26,04 30,82 36,89290 4,154 4,907 5,791 6,799 9,030 11,71 14,53 17,62 21,26 26,27 31,09 37,19295 4,201 4,962 5,854 6,872 9,123 11,82 14,67 17,79 21,45 26,50 31,35 37,49300 4,248 5,017 5,918 6,945 9,216 11,94 14,81 17,96 21,65 26,73 31,62 37,80305 4,295 5,072 5,982 7,018 9,309 12,05 14,95 18,13 21,85 26,96 31,89 38,10310 4,342 5,127 6,045 7,090 9,402 12,17 15,09 18,30 22,05 27,19 32,15 38,41315 4,389 5,182 6,109 7,163 9,495 12,29 15,23 18,47 22,25 27,43 32,42 38,71320 4,437 5,237 6,172 7,236 9,588 12,40 15,37 18,63 22,45 27,66 32,69 39,02325 4,484 5,292 6,236 7,309 9,681 12,52 15,51 18,80 22,65 27,89 32,95 39,32330 4,531 5,347 6,299 7,381 9,774 12,63 15,65 18,97 22,85 28,12 33,22 39,62335 4,578 5,402 6,363 7,454 9,867 12,75 15,79 19,14 23,05 28,35 33,49 39,93340 4,625 5,457 6,427 7,527 9,960 12,86 15,94 19,31 23,25 28,58 33,75 40,23345 4,672 5,512 6,49 7,600 10,05 12,98 16,08 19,48 23,44 28,81 34,02 40,54350 - 5,567 6,554 7,672 10,15 13,10 16,22 19,65 23,64 29,05 34,29 40,84355 - 5,622 6,617 7,745 10,24 13,21 16,36 19,81 23,84 29,28 34,55 41,15360 - 5,677 6,681 7,818 10,33 13,33 16,50 19,98 24,04 29,51 34,82 41,45365 - 5,732 6,744 7,891 10,43 13,44 16,64 20,15 24,24 29,74 35,09 41,76370 - 5,787 6,808 7,963 10,52 13,56 16,78 20,32 24,44 29,97 35,35 42,06375 - 5,841 6,872 8,036 10,61 13,67 16,92 20,49 24,64 30,20 35,62 42,36380 - 5,896 6,935 8,109 10,70 13,79 17,06 20,66 24,84 30,44 35,89 42,67385 - 5,951 6,999 8,182 10,80 13,91 17,20 20,83 25,04 30,67 36,15 42,97390 - 6,006 7,062 8,254 10,89 14,02 17,34 21,00 25,23 30,90 36,42 43,28395 - 6,061 7,126 8,327 10,98 14,14 17,49 21,16 25,43 31,13 36,69 43,58400 - 6,116 7,189 8,400 11,08 14,25 17,63 21,33 25,63 31,36 36,95 43,89405 - 6,171 7,253 8,473 11,17 14,37 17,77 21,50 25,83 31,59 37,22 44,19410 - 6,226 7,317 8,545 11,26 14,48 17,91 21,67 26,03 31,82 37,49 44,49
208
WEIGHT TABLES
WEIGHT TABLE - STUDBOLTS COMPLETE WITH TWO NUTS - METRIC TYPE (Kg./Set)
L M 12 M 14 M 16 M 18 M 20 M 22 M 24 M 27 M 30 M 33 M 36 M 39
25 0,054 0,084 - - - - - - - - - -30 0,058 0,089 - - - - - - - - - -35 0,061 0,094 0,121 - - - - - - - - -40 0,065 0,099 0,127 - - - - - - - - -45 0,068 0,104 0,134 - - - - - - - - -50 0,072 0,109 0,140 0,186 0,250 0,303 - - - - - -55 0,076 0,114 0,147 0,194 0,260 0,315 0,412 0,565 - - - -60 0,079 0,119 0,154 0,203 0,271 0,328 0,427 0,584 - - - -65 0,083 0,124 0,160 0,211 0,281 0,341 0,441 0,603 - - - -70 0,086 0,128 0,167 0,219 0,291 0,353 0,456 0,622 0,834 - - -75 0,090 0,133 0,173 0,227 0,302 0,366 0,471 0,642 0,858 - - -80 0,093 0,138 0,180 0,235 0,312 0,379 0,486 0,661 0,881 1,117 - -85 0,097 0,143 0,186 0,243 0,322 0,391 0,501 0,680 0,904 1,146 - -90 0,101 0,148 0,193 0,252 0,333 0,404 0,516 0,699 0,928 1,175 - -95 0,104 0,153 0,200 0,260 0,343 0,417 0,530 0,718 0,951 1,204 - -100 0,108 0,158 0,206 0,268 0,353 0,429 0,545 0,738 0,975 1,233 - -105 0,111 0,163 0,213 0,276 0,363 0,442 0,560 0,757 0,998 1,262 - -110 0,115 0,168 0,219 0,284 0,374 0,455 0,575 0,776 1,022 1,290 1,670 2,100115 0,118 0,172 0,226 0,293 0,384 0,467 0,590 0,795 1,045 1,319 1,706 2,142120 - 0,177 0,232 0,301 0,394 0,480 0,605 0,814 1,069 1,348 1,741 2,184125 - 0,182 0,239 0,309 0,405 0,493 0,619 0,833 1,092 1,377 1,777 2,225130 - 0,187 0,245 0,317 0,415 0,505 0,634 0,853 1,116 1,406 1,812 2,267135 - - 0,252 0,325 0,425 0,518 0,649 0,872 1,139 1,435 1,848 2,309140 - - 0,259 0,333 0,436 0,531 0,664 0,891 1,163 1,464 1,883 2,351145 - - - 0,342 0,446 0,543 0,679 0,910 1,186 1,492 1,919 2,393150 - - - 0,350 0,456 0,556 0,694 0,929 1,209 1,521 1,954 2,435155 - - - 0,358 0,467 0,569 0,708 0,948 1,233 1,550 1,990 2,477160 - - - 0,366 0,477 0,581 0,723 0,968 1,256 1,579 2,025 2,519165 - - - 0,374 0,487 0,594 0,738 0,987 1,280 1,608 2,061 2,561170 - - - 0,383 0,498 0,607 0,753 1,006 1,303 1,637 2,096 2,603175 - - - 0,391 0,508 0,619 0,768 1,025 1,327 1,665 2,131 2,645180 - - - 0,399 0,518 0,632 0,783 1,044 1,350 1,694 2,167 2,687185 - - - 0,407 0,529 0,645 0,798 1,063 1,374 1,723 2,202 2,729190 - - - 0,415 0,539 0,657 0,812 1,083 1,397 1,752 2,238 2,771195 - - - 0,424 0,549 0,670 0,827 1,102 1,421 1,781 2,273 2,813200 - - - - - - 0,842 1,121 1,444 1,81 2,309 2,855205 - - - - - - - 1,140 1,468 1,838 2,344 2,896210 - - - - - - - 1,159 1,491 1,867 2,380 2,938215 - - - - - - - 1,179 1,514 1,896 2,415 2,980220 - - - - - - - 1,198 1,538 1,925 2,451 3,022225 - - - - - - - 1,217 1,561 1,954 2,486 3,064230 - - - - - - - 1,236 1,585 1,983 2,521 3,106235 - - - - - - - 1,255 1,608 2,011 2,557 3,148240 - - - - - - - 1,274 1,632 2,040 2,592 3,190245 - - - - - - - - 1,655 2,069 2,628 3,232250 - - - - - - - - 1,679 2,098 2,663 3,274255 - - - - - - - - 1,702 2,127 2,699 3,316260 - - - - - - - - 1,726 2,156 2,734 3,358265 - - - - - - - - 1,749 2,185 2,770 3,400270 - - - - - - - - 1,773 2,213 2,805 3,442275 - - - - - - - - 1,796 2,242 2,841 3,484280 - - - - - - - - - 2,271 2,876 3,526285 - - - - - - - - - 2,300 2,912 3,567290 - - - - - - - - - 2,329 2,947 3,609295 - - - - - - - - - 2,358 2,982 3,651300 - - - - - - - - - 2,386 3,018 3,693305 - - - - - - - - - 2,415 3,053 3,735310 - - - - - - - - - 2,444 3,089 3,777315 - - - - - - - - - 2,473 3,124 3,819
WEIGHTFASTENERS12.7
209
FASTENERSWEIGHT 12.7
WEIGHT TABLES
WEIGHT TABLE - STUDBOLTS COMPLETE WITH TWO NUTS - METRIC TYPE (Kg./Set)
L M 42 M 45 M 48 M 52 M 56 M 60 M 64 M 68 M 72 M 76 M 80 M 85
120 2,636 3,242 3,828 4,627 5,388 - - - - - - -125 2,685 3,299 3,893 4,703 5,475 - - - - - - -130 2,734 3,356 3,958 4,780 5,563 - - - - - - -135 2,784 3,412 4,023 4,857 5,650 6,664 7,690 8,961 - - - -140 2,833 3,469 4,088 4,933 5,737 6,765 7,806 9,092 - - - -145 2,882 3,526 4,153 5,010 5,825 6,866 7,922 9,223 - - - -150 2,931 3,583 4,217 5,087 5,912 6,967 8,038 9,354 10,87 12,36 13,57 15,33155 2,980 3,639 4,282 5,163 5,999 7,068 8,153 9,485 11,01 12,52 13,75 15,53160 3,029 3,696 4,347 5,240 6,087 7,169 8,269 9,616 11,16 12,69 13,94 15,74165 3,078 3,753 4,412 5,317 6,174 7,270 8,385 9,747 11,31 12,85 14,12 15,95170 3,127 3,809 4,477 5,394 6,261 7,371 8,500 9,879 11,46 13,02 14,31 16,16175 3,176 3,866 4,542 5,470 6,349 7,472 8,616 10,01 11,60 13,18 14,49 16,37180 3,225 3,923 4,607 5,547 6,436 7,573 8,732 10,14 11,75 13,35 14,67 16,58185 3,274 3,979 4,672 5,624 6,523 7,674 8,848 10,27 11,90 13,51 14,86 16,78190 3,323 4,036 4,737 5,700 6,611 7,775 8,963 10,40 12,50 13,68 15,04 16,99195 3,372 4,093 4,802 5,777 6,698 7,876 9,079 10,53 12,19 13,85 15,22 17,20200 3,421 4,149 4,866 5,854 6,785 7,977 9,195 10,67 12,34 14,01 15,41 17,41205 3,470 4,206 4,931 5,930 6,873 8,078 9,311 10,80 12,49 14,18 15,59 17,62210 3,519 4,263 4,996 5,007 6,960 8,179 9,426 10,93 12,64 14,34 15,78 17,83215 3,568 4,319 5,061 6,084 7,047 8,280 9,542 11,06 12,79 14,51 15,96 18,03220 3,617 4,376 5,126 6,160 7,135 8,381 9,658 11,19 12,93 14,67 16,14 18,24225 3,666 4,433 5,191 6,237 7,222 8,482 9,774 11,32 13,08 14,84 16,33 18,45230 3,715 4,489 5,256 6,314 7,309 8,583 9,889 11,45 13,23 15,00 16,51 18,66235 3,764 4,546 5,321 6,391 7,397 8,684 10,01 11,58 13,38 15,17 16,69 18,87240 3,813 4,603 5,386 6,467 7,484 8,785 10,12 11,71 13,52 15,33 16,88 19,08245 3,862 4,660 5,450 6,544 7,571 8,886 10,24 11,85 13,67 15,50 17,06 19,28250 3,911 4,716 5,515 6,621 7,659 8,987 10,35 11,98 13,82 15,66 17,25 19,49255 3,960 4,773 5,580 6,697 7,746 9,088 10,47 12,11 13,97 15,83 17,43 19,70260 4,009 4,830 5,645 6,774 7,833 9,189 10,58 12,24 14,11 15,99 17,61 19,91265 4,058 4,886 5,710 6,851 7,921 9,290 10,70 12,37 14,26 16,16 17,80 20,12270 4,107 4,943 5,775 6,927 8,008 9,391 10,82 12,50 14,41 16,32 17,98 20,33275 4,156 5,000 5,840 7,004 8,095 9,492 10,93 12,63 14,56 16,49 18,17 20,53280 4,205 5,056 5,905 7,081 8,183 9,593 11,05 12,76 14,71 16,65 18,35 20,74285 4,255 5,113 5,970 7,157 8,270 9,694 11,16 12,89 14,85 16,82 18,53 20,95290 4,304 5,170 6,034 7,234 8,357 9,795 11,28 13,03 15,00 16,99 18,72 21,16295 4,353 5,226 6,099 7,311 8,445 9,896 11,39 13,16 15,15 17,15 18,90 21,37300 4,402 5,283 6,164 7,388 8,532 9,997 11,51 13,29 15,30 17,32 19,08 21,58305 4,451 5,340 6,229 7,464 8,619 10,10 11,63 13,42 15,44 17,48 19,27 21,78310 4,500 5,396 6,294 7,541 8,707 10,20 11,74 13,55 15,59 17,65 19,45 21,99315 4,549 5,453 6,359 7,618 8,794 10,30 11,86 13,68 15,74 17,81 19,64 22,20320 4,598 5,510 6,424 7,694 8,881 10,40 11,97 13,81 15,89 17,98 19,82 22,41325 4,647 5,567 6,489 7,771 8,969 10,50 12,09 13,94 16,03 18,14 20,00 22,62330 4,696 5,623 6,554 7,848 9,056 10,60 12,20 14,07 16,18 18,31 20,19 22,83335 4,745 5,680 6,618 7,924 9,143 10,70 12,32 14,21 16,33 18,47 20,37 23,03340 4,794 5,737 6,683 8,001 9,231 10,80 12,44 14,34 16,48 18,64 20,55 23,24345 4,843 5,793 6,748 8,078 9,318 10,91 12,55 14,47 16,63 18,80 20,74 23,45350 4,892 5,850 6,813 8,154 9,405 11,01 12,67 14,60 16,77 18,97 20,92 23,66355 4,941 5,907 6,878 8,231 9,493 11,11 12,78 14,73 16,92 19,13 21,11 23,87360 4,990 5,963 6,943 8,308 9,580 11,21 12,90 14,86 17,07 19,30 21,29 24,08365 5,039 6,02 7,008 8,385 9,667 11,31 13,01 14,99 17,22 19,46 21,47 24,29370 5,088 6,077 7,073 8,461 9,755 11,41 13,13 15,12 17,36 19,63 21,66 24,49375 5,137 6,133 7,138 8,538 9,842 11,51 13,25 15,25 17,51 19,79 21,84 24,70380 5,186 6,190 7,202 8,615 9,929 11,61 13,36 15,39 17,66 19,96 22,02 24,91385 5,235 6,247 7,267 8,691 10,02 11,71 13,48 15,52 17,81 20,12 22,21 25,12390 5,284 6,303 7,332 8,768 10,1 11,81 13,59 15,65 17,95 20,29 22,39 25,33395 5,333 6,360 7,397 8,845 10,19 11,92 13,71 15,78 18,10 20,46 22,58 25,54400 5,382 6,417 7,462 8,921 10,28 12,02 13,82 15,91 18,25 20,62 22,76 25,74405 5,431 6,473 7,527 8,998 10,37 12,12 13,94 16,04 18,40 20,79 22,94 25,95410 5,480 6,530 7,592 9,075 10,45 12,22 14,06 16,17 18,55 20,95 23,13 26,16
210
WEIGHT TABLES
HEAVY HEX BOLTS - ASME B 18.2.1 - Kg./1000 pcs.
L mm L Inch 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2
10 3/8 - - - - - - - - - - - - -13 1/2 9,0 13,3 - - - - - - - - - - -16 5/8 10,0 14,7 - - - - - - - - - - -19 3/4 10,9 16,1 23,0 36,7 - - - - - - - - -22 7/8 11,9 17,5 24,9 39,3 - - - - - - - - -25 1 12,8 18,9 26,9 41,8 51,2 68,8 111 167 233 319 428 553 71232 1 1/4 15,3 22,0 30,7 46,9 57,7 76,8 123 183 254 346 461 593 76038 1 1/2 17,7 25,6 35,5 52,6 64,1 84,8 135 199 276 373 495 634 80944 1 3/4 20,2 29,1 40,3 58,8 72,1 93,7 146 215 297 400 529 674 85851 2 22,6 32,6 45,1 65,1 80,0 104 159 232 318 426 562 714 90657 2 1/4 25,0 36,2 49,9 70,9 88,0 113 173 249 339 453 596 755 95564 2 1/2 27,5 39,6 54,7 77,6 95,9 123 188 268 363 480 630 795 1,00470 2 3/4 29,9 43,2 59,5 83,9 104 133 202 288 388 509 664 836 1,05276 3 32,4 46,7 64,3 90,1 112 143 216 307 413 541 700 876 1,10183 3 1/4 34,8 50,2 69,1 96,4 120 152 230 326 438 573 739 920 1,15089 3 1/2 37,2 53,8 73,9 103 128 162 244 345 463 605 779 968 1,20295 3 3/4 39,7 57,2 78,7 109 136 172 258 364 488 635 818 1,015 1,259102 4 42,1 60,8 83,5 115 144 182 272 384 513 668 857 1,062 1,315114 4 1/2 47,0 67,8 93,1 128 159 201 300 422 563 732 935 1,158 1,428127 5 51,9 74,8 103 140 175 221 329 460 613 796 1,014 1,253 1,542140 5 1/2 56,8 81,9 112 153 191 240 357 499 663 859 1,092 1,348 1,655152 6 61,6 89 122 165 207 260 385 537 713 923 1,171 1,443 1,768165 6 1/2 66,5 96 132 178 223 279 413 575 763 986 1,249 1,538 1,881178 7 71,4 103 141 190 239 299 441 614 813 1,050 1,328 1,633 1,994191 7 1/2 76,3 110 151 203 255 319 470 652 863 1,113 1,406 1,729 2,107203 8 81,1 117 160 215 271 338 498 690 914 1,177 1,485 1,824 2,220216 8 1/2 86,0 124 170 228 286 358 526 729 964 1,240 1,563 1,919 2,334229 9 90,9 131 180 240 302 377 554 767 1,014 1,304 1,642 2,014 2,447241 9 1/2 95,8 138 189 253 318 397 583 805 1,064 1,367 1,720 2,110 2,560254 10 98,9 141 192 256 321 400 586 809 1,067 1,370 1,723 2,113 2,563
WEIGHTFASTENERS12.7
211
FASTENERSWEIGHT 12.7
WEIGHT TABLES
HEXAGONAL BOLTS - DIN931 - Kg./1000 pcs.
L 8 10 12 14 16 18 20 22 24 27 30 33 36 39
18 12,8 21,3 - - - - - - - - - - - -20 13,4 22,3 32,1 - - - - - - - - - - -22 14,0 23,3 33,5 - - - - - - - - - - -25 15,0 24,7 35,7 - - - - - - - - - - -30 16,6 27,2 39,3 53 77,8 - - - - - - - - -35 19,0 29,7 42,9 58 84,4 - - - - - - - - -40 21,0 32,3 46,5 63 91,0 129 150 - - - - - - -45 22,9 36,6 51,1 69 97,6 137 161 - - - - - - -50 24,9 39,6 56,1 75 106 147 172 250 300 - - - - -55 26,9 42,6 60,5 81 114 157 183 263 316 - - - - -60 28,9 45,6 64,9 87 122 167 195 276 330 - - - - -65 30,9 48,7 69,3 93 130 177 207 291 345 - - - - -70 32,8 51,9 73,7 99 138 187 220 306 363 480 - - - -75 34,8 55,1 78,1 105 146 197 232 321 381 499 - - - -80 36,7 58,1 82,5 111 154 207 244 336 399 518 670 - - -90 40,7 64,2 91,3 123 170 227 269 366 435 572 716 - - -100 44,6 70,5 100 135 186 247 294 396 471 618 785 970 1230 -110 48,2 76,6 109 147 202 267 319 426 507 664 841 1040 1310 -120 - 82,7 118 159 218 287 344 456 543 754 897 1110 1390 1690130 - 88,9 127 171 234 307 369 486 579 799 853 1180 1470 1780140 - 95,1 136 183 250 237 394 516 615 844 1010 1250 1550 1870150 - 101 145 195 266 347 419 546 651 889 1066 1320 1630 1960160 - 107 154 207 282 367 444 576 687 934 1122 1390 1710 2060170 - 113 163 219 298 387 469 606 723 979 1178 1460 1790 2150180 - 119 172 231 314 407 494 636 759 1025 1230 1530 1870 2290190 - - - 243 330 427 519 666 795 1070 1286 1600 1950 2360200 - - - 255 346 447 544 696 831 1105 1350 1670 2030 2430210 - - - - - 467 569 726 867 1150 1406 1740 2110 2500220 - - - - - - 594 756 903 1195 1445 1810 2190 2600230 - - - - - - 619 786 936 1240 1501 1880 2270 2695240 - - - - - - - - - 1285 1555 1950 2350 3790250 - - - - - - - - - 1330 1609 2020 2430 2885260 - - - - - - - - - 1375 1663 2090 2510 2980270 - - - - - - - - - 1420 1717 2160 2590 3075280 - - - - - - - - - 1465 1771 2230 2670 3170290 - - - - - - - - - 1510 1825 2300 2750 2365300 - - - - - - - - - 1555 1879 2370 2830 3360
212
WEIGHT TABLES
SOCKET HEAD SCREWS - ASME B 18.3 - Kg./1000 pcs.
L 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4
12 4,9 10,5 18,0 - - - - - - - -15 5,4 11,8 19,4 24,4 - - - - - - -20 6,2 12,4 21,2 25,9 - - - - - - -25 6,8 13,5 23,0 28,0 39 - - - - - -30 7,5 14,8 26,3 30,8 43 84 - - - - -35 9,0 17,0 30,2 36,9 47 91 171 225 - - -40 10,0 19,8 33,2 40,6 51 99 182 239 - - -45 11,6 22,7 36,0 44,0 55 106 194 253 311 - -50 12,7 24,4 38,7 47,3 59 114 206 267 328 581 75255 13,7 27,0 44,0 53,9 63 121 218 281 345 607 78460 15,0 30,0 46,8 57,2 67 129 230 295 362 633 81665 17,0 32,4 49,5 60,5 71 136 241 309 379 659 84870 18,0 44,4 52,2 63,8 75 144 253 232 396 685 88075 19,5 46,4 57,6 70,4 79 151 265 337 413 711 91280 23,6 49,5 63,0 77,0 83 159 277 351 430 737 94485 - 55,5 68,8 84,1 87 166 289 365 447 763 97690 - - 76,5 92,0 91 174 300 379 464 789 100895 - - 83,5 99,1 95 181 312 393 481 815 1040100 - - 90,0 107,0 99 189 324 407 498 841 1072110 - - - - 107 204 247 435 530 891 1132120 - - - - 115 219 370 463 562 941 1192130 - - - - 123 234 393 491 594 991 1252140 - - - - 131 249 416 519 626 1041 1312150 - - - - 139 264 439 547 658 1094 1372160 - - - - 147 279 462 575 690 1141 1432170 - - - - 155 294 485 603 722 1191 1492180 - - - - 163 309 508 631 754 1241 1552190 - - - - - - - 659 786 1291 1612200 - - - - - - - 687 818 1341 1672210 - - - - - - - 715 850 1391 1732220 - - - - - - - 743 882 1441 1792230 - - - - - - - 771 914 1491 1852240 - - - - - - - 799 946 1541 1912250 - - - - - - - 827 978 1591 1972
WEIGHTFASTENERS12.7
213
FASTENERSWEIGHT 12.7
WEIGHT TABLES
SOCKET HEAD CAP SCHREWS - DIN912 - Kg./1000 pcs.
L 8 10 12 14 16 18 20 22 24 27 30 33 36 39
18 12,8 21,3 - - - - - - - - - - - -20 13,4 22,3 32,1 - - - - - - - - - - -22 14,0 23,3 33,5 - - - - - - - - - - -25 15,0 24,7 35,7 - - - - - - - - - - -30 16,6 27,2 39,3 53 77,8 - - - - - - - - -35 19,0 29,7 42,9 58 84,4 - - - - - - - - -40 21,0 32,3 46,5 63 91,0 129 150 - - - - - - -45 22,9 36,6 51,1 69 97,6 137 161 - - - - - - -50 24,9 39,6 56,1 75 106 147 172 250 300 - - - - -55 26,9 42,6 60,5 81 114 157 183 263 316 - - - - -60 28,9 45,6 64,9 87 122 167 195 276 330 - - - - -65 30,9 48,7 69,3 93 130 177 207 291 345 - - - - -70 32,8 51,9 73,7 99 138 187 220 306 363 480 - - - -75 34,8 55,1 78,1 105 146 197 232 321 381 499 - - - -80 36,7 58,1 82,5 111 154 207 244 336 399 518 670 - - -90 40,7 64,2 91,3 123 170 227 269 366 435 572 716 - - -100 44,6 70,5 100 135 186 247 294 396 471 618 785 970 1230 -110 48,2 76,6 109 147 202 267 319 426 507 664 841 1040 1310 -120 - 82,7 118 159 218 287 344 456 543 754 897 1110 1390 1690130 - 88,9 127 171 234 307 369 486 579 799 853 1180 1470 1780140 - 95,1 136 183 250 237 394 516 615 844 1010 1250 1550 1870150 - 101 145 195 266 347 419 546 651 889 1066 1320 1630 1960160 - 107 154 207 282 367 444 576 687 934 1122 1390 1710 2060170 - 113 163 219 298 387 469 606 723 979 1178 1460 1790 2150180 - 119 172 231 314 407 494 636 759 1025 1230 1530 1870 2290190 - - - 243 330 427 519 666 795 1070 1286 1600 1950 2360200 - - - 255 346 447 544 696 831 1105 1350 1670 2030 2430210 - - - - - 467 569 726 867 1150 1406 1740 2110 2500220 - - - - - - 594 756 903 1195 1445 1810 2190 2600230 - - - - - - 619 786 936 1240 1501 1880 2270 2695240 - - - - - - - - - 1285 1555 1950 2350 3790250 - - - - - - - - - 1330 1609 2020 2430 2885260 - - - - - - - - - 1375 1663 2090 2510 2980270 - - - - - - - - - 1420 1717 2160 2590 3075280 - - - - - - - - - 1465 1771 2230 2670 3170290 - - - - - - - - - 1510 1825 2300 2750 2365300 - - - - - - - - - 1555 1879 2370 2830 3360
214
WEIGHT TABLES
WEIGHT TABLE FOR ROUND AND HEXAGON BARS Kg./meter
Dim. Dim. Dim. Dim.
3 0,06 0,06 45 12,47 13,77 88 47,7 52,65 131 105,71 116,673,5 0,08 0,08 46 13,03 14,39 89 48,79 53,85 132 107,33 118,464 0,10 0,11 47 13,61 15,02 90 49,90 55,07 132 107,33 118,465 0,15 0,17 48 14,19 15,66 91 51,01 56,30 133 108,96 120,266 0,22 0,25 49 14,79 16,32 92 52,14 57,54 134 110,61 122,077 0,30 0,33 50 15,40 17,00 93 53,28 58,80 135 112,27 123,908 0,40 0,44 51 16,02 17,68 94 54,43 60,07 136 113,94 125,759 0,50 0,55 52 16,66 18,38 95 55,59 61,36 137 115,62 127,6010 0,62 0,68 53 17,30 19,10 96 56,77 62,65 138 117,31 129,4711 0,75 0,82 54 17,96 19,82 97 57,96 63,97 139 119,02 131,3512 0,89 0,98 55 18,63 20,57 98 59,16 65,29 140 120,74 133,2513 1,04 1,15 56 19,32 21,32 99 60,37 66,63 141 122,47 135,1614 1,21 1,33 57 20,01 22,09 100 61,60 67,98 142 124,21 137,0815 1,39 1,53 58 20,72 22,87 101 62,84 69,35 143 125,97 139,0216 1,58 1,74 59 21,44 23,67 102 64,09 70,73 144 127,73 140,9717 1,78 1,96 60 22,18 24,47 103 65,35 72,13 145 129,51 142,9418 2,00 2,20 61 22,92 25,30 104 66,63 73,53 146 131,31 144,9219 2,22 2,45 62 23,68 26,13 105 67,91 74,95 147 133,11 146,9120 2,46 2,72 63 24,45 26,98 106 69,21 76,39 148 134,93 148,9121 2,72 3,00 64 25,23 27,85 107 70,53 77,84 149 136,76 150,9322 2,98 3,29 65 26,03 28,72 108 71,85 79,30 150 138,60 152,9723 3,26 3,60 66 26,83 29,61 109 73,19 80,77 155 147,99 163,3324 3,55 3,92 67 27,65 30,52 110 74,54 82,26 160 157,7 174,0425 3,85 4,25 68 28,48 31,44 111 75,90 83,76 165 167,71 185,0926 4,16 4,60 69 29,33 32,37 112 77,27 85,28 170 178,02 196,4827 4,49 4,96 70 30,18 33,31 113 78,66 86,81 175 188,65 208,2028 4,83 5,33 71 31,05 34,27 114 80,06 88,35 180 199,58 220,2729 5,18 5,72 72 31,93 35,24 115 81,47 89,91 185 210,83 232,6830 5,54 6,12 73 32,83 36,23 116 82,89 91,48 190 222,38 245,4331 5,92 6,53 74 33,73 37,23 117 84,32 93,06 195 234,23 258,5132 6,31 6,96 75 34,65 38,24 118 85,77 94,66 200 246,40 271,9433 6,71 7,40 76 35,58 39,27 119 87,23 96,27 205 258,87 285,7134 7,12 7,86 77 36,52 40,31 120 88,70 97,90 210 271,66 299,8135 7,55 8,33 78 37,48 41,36 121 90,19 99,54 215 284,75 314,2636 7,98 8,81 79 38,44 42,43 122 91,69 101,19 220 298,14 329,0537 8,43 9,31 80 39,42 43,51 123 93,19 102,85 225 311,85 344,1738 8,90 9,82 81 40,42 44,60 124 94,72 104,53 230 325,86 359,6439 9,37 10,34 82 41,42 45,71 125 96,25 106,23 235 340,19 375,4540 9,86 10,88 83 42,44 76,83 126 97,80 107,93 240 354,82 391,5941 10,35 11,43 84 43,46 47,49 127 99,35 109,65 245 369,75 408,0842 10,87 11,99 85 44,51 49,12 128 100,93 111,39 250 385,00 424,9143 11,39 12,57 86 45,56 50,28 129 102,51 113,13 255 400,55 442,0744 11,93 13,16 87 46,63 51,46 130 104,10 114,89 260 416,42 459,58
DENSITY (kg/dm3)
A20 A200 A276 A400 A500 A600 A625 A686 A718 A725 AX750 80A
N08020 N02200 N10276 N04400 N05500 N06600 N06625 N06686 N07718 N07725 N07750 N070808,08 8,89 8,89 8,83 8,47 8,43 8,44 8,73 8,22 8,31 8,38 8,19
A800 HT A825 A904L A925 B2 C22 C61400 C63000 C65500 HX TI 2 TI 5
N08811 N08825 N08904 N09925 N10665 N06022 C61400 C63000 C65500 N06002 R50400 R564008,10 8,14 8,00 8,05 9,22 8,81 7,46 7,50 8,53 8,22 4,53 4,45
Carbon Steel-Duplex-Superduplex-660: 7,85
WEIGHTFASTENERS12.7
215
216
217
Content
13.1 Spring Hangers and Pipe Supports 21813.2 Caissons 21913.3 Bird Screens 22013.4 Strainers and Filters 22113.5 Flame Arrestors 22213.6 Induction Bends 22313.7 Spools 22413.8 Bleed/Drip Rings 22513.9 Sight Glasses 22613.10 Injection and Sampling Quills 22713.11 Expansion Joints/Bellows 22813.12 Flexible Hoses, Steel Hoses, Hose Reels and Couplings 22913.13 Utility Stations 23013.14 Special Flanges 23113.15 Pig Launchers/Receivers 23213.16 Static Mixers 23313.17 Silencers 23413.18 Vacuum Breakers 23513.19 Pressure/Vacuum Relief Valves 23613.20 Barred Tees 23713.21 Corrosion Monitoring 23813.22 Sand Erosion Monitoring 23913.23 Acoustic Sand and Pig Detection 24013.24 Steam Traps 24113.25 Transition Pieces and Cross-overs 24213.26 Forged and Machined Special Items 24313.27 Seamless Forged Pipes/Trepanning 24413.28 Drain Gullies 24513.29 Hammerlug Unions/Assemblies 24613.30 Anchor Flanges 24713.31 Swivel Flanges 248
13SPECIAL ITEMS
218
SPRING HANGERS AND PIPE SUPPORTSSPECIAL ITEMS13.1
SPRING HANGERS AND PIPE SUPPORTS
Spring Supports (Constants and Variables)Spring units are used to support the weight of the piping system and allow vertical pipe displacement due to thermal expansion or contraction. Constant springs have a fi ed load and are usually used when vertical travels exceed 75mm; Variable springs are used for medium range displacements up to approximately 75mm. Loads up to 35,000kg can be accommodated with standard spring units; larger loads upon request.
Ancillary Equipment, Pipe Shoes and Secondary SteelworkAn extensive stock of components such as pipe clamps, pipe shoes, U-bolts, beam clamps, roller / slide supports, etc is available, all to accommodate pipe sizes up to 2000 NS - these are frequently made to clients’ drawings and specifi ations.
Isolation Products and EquipmentThese particular types of pipe clamps and U-bolts are used to offer a reduction in noise, vibration, whilst also offering prevention of electrolytic erosion between dissimilar metals. Neoprene or Silicon encasing materials are used providing a working temperature range of -30C to 300C.
Engineering Services• Design of complete pipe support systems • Piping stress analysis• Site inspections and surveys
Norwegian Piping can provide high quality spring hangers, pipe supports and engineering service through well-established manufacturer relationships.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
219
SPECIAL ITEMSCAISSONS 13.2
CAISSONS
Norwegian Piping has a broad experience in supplying caissons to the offshore oil and gas industry both for FPSOs and platforms in various configu ations, dimensions and material grades. We work in close cooperation with our skilled manufacturers and solve any challenges such as verifi ation of nozzle loads and welding solutions together with their experienced technical staffs.
Caissons for disposal of water and environmentally unharmful fluids f om platforms and FPSOs.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
220
BIRD SCREENSSPECIAL ITEMS13.3
BIRD SCREENS
Norwegian Piping can offer bird screens customized to any requirements that our clients may have. We can provide drawings for evaluation and approval prior to manufacture at any of our experienced manufacturers. Bird screens are typically made in 316 stainless steel, but can be supplied in any grade or finish
Bird screens in oil and gas industry are mechanical devices to prevent undesired elements entering open pipeline systems.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
221
SPECIAL ITEMSSTRAINERS AND FILTERS 13.4
STRAINERS AND FILTERS
Typical range of strainers includes:• Y-strainers• Basket strainers• Bath tub strainers• Conical strainers• Duplex fil ers
Depending on type some of the product advantages of the Norwegian Piping supplied strainers are:• Easy installation • Low pressure drop• High contamination holding capacity• Extensive operating periods between maintenance• Optimized ratio of wall thickness vs erosion/corrosion allowance
The strainers and fil ers meet international codes of construction such as PD5500, ASME VIII, EN 13445, ASME B31.3 and the European Pressure Equipment Directive 97/23/EC and come in wide range of materials from cast iron and plastic to high grade steel alloys such as Duplex, Super Duplex, Nickel Alloys and Titanium. The products and materials are also available to applicable NORSOK Material Data Sheets from NORSOK M-650/Statoil TR2000 qualified manu acturers.
Norwegian Piping cooperate with leading manufacturers of strainers and fil ers to provide our customers with cost and operation efficient solutions o separate and remove solids and particles from the liquid/gas fl w.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
222
FLAME ARRESTORSSPECIAL ITEMS13.5
FLAME ARRESTORS
A flame ar estor functions by absorbing the heat from a flame f ont traveling at sub-sonic velocities, thus dropping the burning gas/air mixture below its auto-ignition temperature. Consequently, the flame will not survi e. Heat is absorbed through regular, or irregular, channels. The required size of the channels needed to stop the flame f ont can vary signifi antly depending on the flammability of the fuel mixtu e.
Flame arrestors are typically used to:• Stop the spread of an open fi e• Limit the spread of an explosive event that has occurred• Protect potentially explosive mixtures from igniting• Confine f e within an enclosed, controlled, or regulated location• Stop the propagation of a flame t aveling at sub-sonic velocities
Norwegian Piping supplies both in-line and end-of-line units in sizes ranging from ½” – 24”.The Norwegian Piping supplied flame ar estors have in general low maintenance requirements and are designed for easy access to cleaning. Our experienced personnel can provide technical assistance related to defining ecommendable arrestors based on available information, such as dimensions, medium, fl w rates and distance to source of ignition.
The products are designed, tested and certified o EN 12874:2001 in accordance with ATEX Directive 94/9/EC.
Flame arrestors are mechanical safety devices designed to stop the propagation of flames whil t permitting the fl w of gas and liquid mixtures.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
223
SPECIAL ITEMSINDUCTION BENDS 13.6
INDUCTION BENDS
Induction bending allows fl xibility in design, radius and angle. Local heating of bending area using induced electric currents, combined with infrared camera aided temperature control, ensures a controlled heating and bending process.
Although induction bending reduces wall thickness at the outside of the bend and changes the degree of ovality, the process increases material quality and greatly reduces costs compared to traditional methods of bending.
Induction bends can also be supplied with integrated tangents.
Advantages with induction bending:• Allows increased radius of the bend seamlessly, which results in better fl w and reduced
internal wear• Reduced number of welds• Adjustable radius • Flexibility through choice of angles to suit customer design
For more information on 3D/5D bends, please see page 38.
Norwegian Piping has broad experience with the product and can supply induction bended pipes in any material grade, also from NORSOK M-650/Statoil TR2000 qualified manu acturers.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
224
SPOOLSSPECIAL ITEMS13.7
SPOOLS
We can supply in a wide range of materials; carbon steel, cladded carbon steel, 316 stainless steel, Duplex, Super Duplex, 6MO, Nickel Alloys and Titanium, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
As part of the Special Items offering Norwegian Piping can also supply spools and end connections in various and unconventional dimensions and configu ations.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
225
SPECIAL ITEMSBLEED/DRIP RINGS 13.8
BLEED/DRIP RINGS
The rings provide a beneficial way of d ain pipes, take samples, attach instruments or bleed off valves.
Norwegian Piping can supply in a wide range of materials; 316 stainless steel, Duplex, Super Duplex, 6MO, Nickel Alloys and Titanium, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
For more information on bleed/drip rings, please see page 142.
Bleed or drip rings are rings with one or more radial pipe connections designed to fit bet een standard flanges.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
226
SIGHT GLASSESSPECIAL ITEMS13.9
SIGHT GLASSES
Through well established relations to high quality manufacturers Norwegian Piping can supply sight glasses in material, dimensions, pressures and temperatures suitable to meet any application and customer requirements, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
Sight glasses allow processes within pipes, tanks and pressure vessels to be observed visually. The sight glasses typically come with welded or flangedinterface.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
227
SPECIAL ITEMSQUILLS 13.10
INJECTION AND SAMPLING QUILLS
Norwegian Piping supplies injection and sampling quills with customer specified in erface connection and optionally with integrated valve to avoid interrupting the fl w in the system. We can either supply the full system or alternatively only the branch nozzle connections and access fittings o suit applicable quills.
The quills can be machined from one piece (forging/bar) to reduce the risk of material fatigue in the weld between flange and quill tube and optimal solution or the quill guide bars.
We can supply quills in any material grade and rating, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
The injection of chemicals and sampling of process fluids a e two frequent requirements for the oil and gas extraction, refining and pipeline indu tries.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
228
EXPANSION JOINTSSPECIAL ITEMS13.11
EXPANSION JOINTS
The expansion/fl xible section is typically supplied in rubber, steel or higher alloys with a flangedsteel interface connection.
Norwegian Piping has well-established relations and experience with skilled manufacturers, also NORSOK M-650/Statoil TR2000 qualified, of xpansion joints and can assist in finding optimalsolutions to satisfy the material, dimension, pressure and temperature requirements of the client.
Expansion joints are used in piping systems to absorb expansion or movement caused by e.g. thermal effects, vibration, pressure thrust or other mechanical forces. An expansion joint can be used where expansion loops are undesirable or impractical.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
229
SPECIAL ITEMSHOSES, REELS AND COUPLINGS 13.12
FLEXIBLE HOSES, STEEL HOSES, REELS AND COUPLINGS
Combined with the internal competence we can offer complete packages and solutions to attractive price and delivery times to our customers.
Norwegian Piping has a broad network to manufacturers and suppliers of fl xible hoses, steel hoses reels and couplings for various applications and services.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
230
UTILITY STATIONSSPECIAL ITEMS13.13
UTILITY STATIONS
Norwegian Piping has extensive experience in working together with manufacturers of utility stations for services such as: • plant air• sweet water• hot water• diesel• nitrogen.
Through the combination of internal experience and the competence at selected manufacturers Norwegian Piping can supply complete utility stations meeting the customer requirements to competitive price and delivery times.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
231
SPECIAL ITEMSSPECIAL FLANGES 13.14
SPECIAL FLANGES
We can supply in a wide range of materials; carbon steel, cladded material, 316 stainless steel, Duplex, Super Duplex, 6MO, Nickel Alloys and Titanium, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
Norwegian Piping can also offer a wide range of unconventional flangeconnections not covered by any known dimensional standard or piping class, spec. break flanges bet een different piping classes as well as spectacle blinds, spacers and spades tailored to the customer needs.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
232
PIG LAUNCHERS AND RECEIVERSSPECIAL ITEMS13.15
PIG LAUNCHERS AND RECEIVERS
The pig launcher and receiver are used for inserting and retracting the pig into/out of the pipeline without the need to stop the process fl w.
Through our relations to experienced manufacturers Norwegian Piping can offer pig launcher and receivers in a wide range of configu ations and materials.
Pigging is typically used for cleaning of the pipeline for deposit buildup or for inspection purpose, using devices commonly referred to as ‘pigs’.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
233
SPECIAL ITEMSSTATIC MIXERS 13.16
STATIC MIXERS
Normally the fluids o be mixed are liquid, but static mixers can also be used to mix gas streams, disperse gas into liquid or blend immiscible liquids.
Norwegian Piping can supply static mixers in any size, design and material grade meeting the application requirements. Typical material range is carbon steel, 316 stainless steel, Duplex, Super Duplex, 6MO, Nickel Alloys and Titanium which also can be supplied from NORSOK M-650 and Statoil TR2000 qualified manu acturers.
A static mixer is a mechanical device for the continuous mixing of fluid ma erials.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
234
SILENCERSSPECIAL ITEMS13.17
SILENCERS
In close cooperation with renowned manufacturers Norwegian Piping can offer a broad range of silencers designed to meet the requirements and dimensions of every kind of application. Typical material is carbon steel, but other material grades are also available.
Silencers are used to attenuate noise from pipeline systems.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
235
SPECIAL ITEMSVACUUM BREAKERS 13.18
VACUUM BREAKERS
At the same time as the vacuum breakers help protect your plant and process equipment against vacuum they allow condensate to drain effectively from pipework and storage vessels.
The vacuum breakers typically come in brass and stainless steel materials with ½” screwed BSP or NPT connection, but Norwegian Piping can also supply vacuum breakers in other dimensions, interface and material grades.
Vacuum Breakers are used to break the vacuum in a system when the system pressure drops below atmospheric pressure.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
236
RELIEF VALVESSPECIAL ITEMS13.19
PRESSURE/VACUUM RELIEF VALVES
The range includes pressure only, vacuum only and combined pressure/vacuum valves, all available with flanged out ets or vented to atmosphere.
Norwegian Piping can offer a broad range of pressure/vacuum relief valves designed to meet the requirements and dimensions of every kind of application. Typical material of housing is cast iron or stainless steel.
Pressure/vacuum relief valves are designed for tank and pipeline system protection as they allow passage of air without letting liquid escape.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
237
SPECIAL ITEMSBARRED TEES 13.20
BARRED TEES
Norwegian Piping can supply barred tees in any dimensions and rating, including supporting calculations and drawings reflecting the client s specifi ation and demands to tolerances. Crucial information for this work is design temperature, design pressure, pipe ID and the relation between pipe ID and the pig.
Typical material grades are carbon steel, high yield carbon steel, Duplex and Super Duplex. Other steel grades can be delivered upon request. Material also available from NORSOK M-650 and Statoil TR2000 qualified manu acturers.
A barred tee is a tee used in piggable pipelines. To prevent the pig from travelling down the branch connection the barred tee has restriction bars internally welded in the branch. Typical pigs are inspection, cleaning and ball pigs.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
238
CORROSION MONITORING SPECIAL ITEMS13.21
CORROSION MONITORING
Through the access to specialist competence within our cooperating manufacturers we can advise on optimal corrosion monitoring solutions for each specific appli ation.
Electrical resistance probes have a sample of the pipe material embedded in the probe tip, mounted flush with the inner pipe wall. As the samp e corrodes the continuously monitored electrical resistance of the element changes and corrosion rate is calculated through advanced algorithms.
When corrosion coupons are used, the samples/coupons placed in the fl w are manually retracted, cleaned of corrosion product and weighted to determine corrosion rate.
Depending on the application and customer needs Norwegian Piping can supply the full range from hydraulic or mechanical access fittings moun ed on the pipeline for easy insertion/retrieval of probes and coupons to full electrical resistant based corrosion monitoring systems with instrumentation. Combined probes including both corrosion and sand erosion elements can also be supplied.
Our supporting manufacturers can offer wireless loggers avoiding the need for extensive cabling on the installation site.
Norwegian Piping is cooperating with and has strong support from leading manufacturers of pipeline corrosion monitoring systems, based either on real-time electrical resistance measurement or manual coupon/weight based measurement.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
239
SPECIAL ITEMSSAND EROSION MONITORING 13.22
SAND EROSION MONITORING
Through the access to specialist competence within our cooperating manufacturers we can advise on optimal sand erosion monitoring solutions for each specific appli ation.
Electrical resistance based sand erosion measurement is based on probes inserted in the fl w, where the resistance in erosion elements is continuously monitored. With the gradual metal loss caused by erosion the resistance will change and through advanced algorithms the sand mass rate is calculated.
Depending on the application and customer needs Norwegian Piping can supply the full range from access fittings moun ed on the pipeline for easy insertion/retrieval of probes to full electrical resistant based sand erosion monitoring systems. Combined probes including both corrosion and sand erosion elements can also be supplied.
Complete combined acoustic and erosion based sand management system can be offered for increased robustness of data.
Our supporting manufacturers can offer wireless loggers avoiding the need for extensive cabling on the installation site.
Norwegian Piping is cooperating with and has strong support from leading manufacturers of sand erosion monitoring systems, based on real-time electrical resistance measurements.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
240
ACOUSTIC SAND AND PIG DETECTION SPECIAL ITEMS13.23
ACOUSTIC SAND AND PIG DETECTION
Acoustic sand detectors pick up the noise from sand and particles hitting the pipe wall after a bend and the sand mass rate is calculated through advanced algorithms. The same hardware is used for pig detectors where the noise of a passing pig is detected.
Through the access to specialist competence within our cooperating manufacturers we can advise on optimal placement of acoustic sand and or pig detectors for each specific appli ation.
Complete combined acoustic and erosion sand management system can be offered for increased robustness of data
Norwegian Piping is cooperating with and has strong support from leading manufacturers of acoustic sand and pig detectors, mounted on the outside of the pipe making them non-intrusive.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
241
SPECIAL ITEMSSTEAM TRAPS 13.24
STEAM TRAPS
A variety of solutions are available for this purpose and Norwegian Piping has the experience and relations to manufacturers to advice and accommodate the needs and requirements for our customers.
Depending on the solution a wide variety and combination of materials are available.
A steam trap is typically used in a heat exchange system or steam transport pipeline to trap and discharge condensed steam and air while remaining tight to live steam, to maintain efficiency in the sy tem.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
242
TRANSITION PIECESSPECIAL ITEMS13.25
TRANSITION PIECES AND CROSS¯OVERS
Norwegian Piping has well established relations to high quality manufacturers of transition pieces and can supply in a wide range of materials; carbon steel, cladded carbon steel, 316 stainless steel, Duplex, Super Duplex, 6MO, Nickel Alloys and Titanium, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
Transition pieces and cross-overs is tailored to suit customer requirements in different applications to connect pipes, flanges and hubs with dif erent ratings, dimensions, wall thickness and interfaces.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
243
SPECIAL ITEMSFORGED AND MACHINED SI 13.26
FORGED AND MACHINED SPECIAL ITEMS
Y-pieces, cross-overs, larger o-lets, special branch fittings, therm well connections and other special fittings a e typical items that fall into this category.
The material range typically covered is carbon steel, cladded carbon steel, 316 stainless steel, Duplex, Super Duplex, 6MO, Nickel Alloys and Titanium, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
Through the network of forgeries and machine shops Norwegian Piping can supply forged and machined special items in wide range of size and configu ation.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
244
SEAMLESS FORGED PIPES/TREPANNINGSPECIAL ITEMS13.27
SEAMLESS FORGED PIPES/TREPANNING
This method is used when the required pipe falls outside the manufacturing capability of the pipe mills with particular combinations on OD and wall thickness and for special applications.
The material range typically covered is carbon steel, 316 stainless steel, Duplex, Super Duplex, 6MO and Nickel Alloys and also based on NORSOK M-650 and Statoil TR2000 qualifiedmanufacturers.
Seamless forged pipes/trepanning are typically heavy wall pipes manufactured out of a solid bar. Through trepanning the core of the bar is drilled or machined out using specially designed tools.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
245
SPECIAL ITEMSDRAIN GULLIES 13.28
DRAIN GULLIES
Through a broad network to reliable manufacturers Norwegian Piping can offer drain gullies meeting the application requirements in the material grade requested by the clients.
Norwegian Piping can supply drain gullies/boxes for deck mounting in any material and dimension used in the oil and gas industry.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
246
HAMMERLUG UNIONS/ASSEMBLIESSPECIAL ITEMS13.29
HAMMERLUG UNIONS/ASSEMBLIES
Norwegian Piping can supply hammerlug unions and assemblies in any material and dimension used in the oil and gas industry.
Through a well-established network to high quality manufacturers we can offer hammerlug unions at competitive price and delivery times.
Hammerlug unions are used for quick connection of pipes, fl xible hoses or blinding off pipelines.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
247
ANCHOR FLANGES
Due to fluc ating temperatures both inside and outside the pipeline, the material is susceptible to yielding. Anchor flanges, used at in ervals over long pipelines, are designed to absorb these movements and impede any eventual buckling of the pipe. Once welded to the connecting pipes, the assembly is then set in concrete to enhance the stability of the connection.
Each anchor flange is specif ally designed in accordance with conditions pertinent to the maximum temperature variations between installation and operation.
Norwegian Piping can supply anchor flanges in a wide ange of materials: carbon steel, cladded material, 316 stainless steel, Duplex, Super Duplex, 6MO, Nickel alloys and titanium, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
Anchor flanges a e designed to limit the displacement of the pipeline by re-distributing the axial thrust to the foundation where the anchor flange isembedded.
SPECIAL ITEMSANCHOR FLANGES 13.30
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
248
SPECIAL ITEMS SWIVEL FLANGES13.31
SWIVEL FLANGES
The swivel flange s rotary ring enables a trouble-free alignment of bolt holes with the corresponding welding neck flange. A cordingly, their construction facilitates assembly whilst ensuring a stable and sound connection to the matching welding neck flange
Swivel flanges a e available up to 48” covering all pressure classes (#150 up to #2500). Other sizes and pressure classes are available on request.
Typical material grades are Duplex and Super Duplex, but other materials can also be provided, also based on NORSOK M-650 and Statoil TR2000 qualified manu acturers.
Swivel flanges a e designed principally for use in subsea applications.
FOR MORE DETAILS, clarifications or offers please contact any of Norwegian Piping’s sales representatives. Contact details are found on www.norwegianpiping.com
249
250
NORWEGIAN PIPING PRESENCE
NORWAYIdrettsvegen 1445353 Straume+47 56 31 23 00
KOREA33 Yutongdanji 1-ro
97 Beon-gilGangseo-gu
Busan
251
WAREHOUSE CAPACITY AND STOCK
www.norwegianpiping.com