Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 1 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Alexandria Mineral Oils Company (AMOC)
Chemical Laboratory
Products Specifications Sheet
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 2 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Index
S.N. Page No. Product
1 3 of 20 FUEL OIL FOR EXPORT
2 4 of 20 STRAIGHT RUN FUEL OIL
3 5 of 20 TRANSFORMER OIL
4 6 of 20 AUTOMATIC TRANSMISSION FLUID ( ATF IID) AMOC POWER (D-21611)
5 7 of 20 AUTOMATIC TRANSMISSION FLUID (ATFIII-G) & AMOC POWER PLUS (DEXRON III-G34291)
6 8 of 20 PARAFFIN WAX UNHYDROTREATED FULLY REFINED AW (520-540-560-580-600)
7 9 of 20 PARAFFIN WAX HYDROTREATED FULLY REFINED AW (520-540-560-580-600)
8 10 of 20 PARAFFIN WAX UNHYDROTREATED FULLY REFINED AWU (540-600)
9 11 of 20 PARAFFIN WAX HYDROTREATED SEMI REFINED AW SRW 600
10 12 of 20 SLACK WAX
11 13 of 20 LIQUIFIED PETROLEUM GAS
12 14 of 20 NAPHTHA
13 15 of 20 LOW POUR POINT GAS OIL
14 16 of 20 GAS OIL, EGYPTIAN STANDARD NO. 16 (2013)
15 17 of 20 EGYPTIAN STANDARD SPECIFICATION FOR FUEL OIL (17 - 2007)
16 18 of 20 BASE OIL SN (150)
17 19 of 20 BASE OIL SN (400/500)
18 20 of 20 BASE OIL SN (600/700)
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 3 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
1 - FUEL OIL FOR EXPORT
Product Characteristics:
Test Method Unit Specification
Density @15°C ASTM D4052 g/ml As agreed with customer
Sulphur ,Total ASTM D2622 % mass As agreed with customer
Flash Point P.M.C.C. ASTM D93 °C As agreed with customer
Pour Point ASTM D97 °C As agreed with customer
Kin. Viscosity @100°C ASTM D445 mm2/s(cSt) As agreed with customer
Conradson Carbon ASTM D189 %mass As agreed with customer
Water Content ASTM D95 %(V/m) As agreed with customer
Heat of combustion ASTM D4868 As agreed with customer
Gross Heat of combustion ASTM D4868 BTU/Ib As agreed with customer
Net Heat of combustion ASTM D4868 BTU/Ib As agreed with customer
Sodium ASTM D5863 ppm As agreed with customer
Nickel ASTM D5863 ppm As agreed with customer
Vanadium ASTM D5863 ppm As agreed with customer
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 4 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
2 - STRAIGHT RUN FUEL OIL
Product Characteristics:
Test Method Unit Specification
Relative Density @ 60/60 °F
ASTM D1298 - 0.92
Redwood Viscosity 1 @100 °F
IP-70 Sec 850 Approx.
Sulphur ,Total ASTM D4294 % mass Max. 1.00
Water and Sediment ASTM D2709 % Vol Max. 0.10
Carbon Residue ASTM D4530 % mass Max. 8.0
Pour Point ASTM D97 °C 42
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 5 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
3 - TRANSFORMER OIL (UNINHEBITED)
Product Characteristics:
Test Method Unit Specification
Density @ 15 °C ASTM D4052 g/ml Reported
Kin. viscosity @ 40 °C ASTM D445 mm2/s(cSt) Max. 12.0
Kin. viscosity @ 100 °C ASTM D445 mm2/s(cSt) Reported
Viscosity Index ASTM D2270 - Reported
Pour Point ASTM D97 °C Reported
Flash Point P.M.C.C. ASTM D93 °C Min. 140
Water Content ASTM D6304 ppm Max. 30
Corrosive Sulphur ASTM D1275 / ISO 5662 Rating Non corrosive
Acid Number ASTM D664 mg KOH/g Max. 0.01
Electric Strength (after treatment)
IEC 156 / BS 5874 KV Min. 50
Appearance Visual Clear & Bright
Crude Origin: Egyptian
Refining Process: Solvent refining, solvent dewaxing & hydro-finishing
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 6 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
4 - AUTOMATIC TRANSMISSION FLUID (ATF IID) AMOC POWER (D-21611)
Product Characteristics:
Test Method Unit Specification
Density @ 15 °C ASTM D4052 g/ml Reported
Kin. viscosity @ 40 °C ASTM D445 mm2/s(cSt) Reported
Kin. viscosity @ 100 °C ASTM D445 mm2/s(cSt) 6.0 - 8.0
Viscosity Index ASTM D2270 Min. 150
Flash Point C. O. C. ASTM D92 °C Min. 170
Pour Point ASTM D97 °C Max - 39
Colour ASTM ASTM D1500 6 - 8
Acid Number ASTM D664 mg KOH/g Reported
Water Content ASTM D95 %(V/m) Nil
Copper Strip Corrosion (3 hrs @ 150 °C)
ASTM D130 1 b
Brookfield Viscosity @-40 °C
ASTM D2983 c.P. Max. 50000
Foaming Characteristics Sequence I Sequence II Sequence III
ASTM D892 m/s Max. 100/0 Max. 100/0 Max. 100/0
Appearance Visual Red & bright
Approvals & Quality Levels: AMOC Power is approved by ZF TE-ML14A&TE-ML11A &TE-ML04-D and Voith H55.6335.xx for DIWA Transmission.
It also meets the requirements of General Motors, Allison C3, MAN 339-D and DC-236.7.
Miscibility & Compatibility: AMOC Power is completely miscible and compatible with all other already marketed ATF Dexron IID types.
Application: AMOC Power is suitable for all transmission American, European and Japanese power steering boxes and other applications where ATF Dexron IID is recommended. Refining process: Solvent refining, solvent dewaxing & hydro-finishing
*Recommended Drain Interval: 30,000 KM under normal operating conditions.
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 7 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
5 - AUTOMATIC TRANSMISSION FLUID (ATF IIIG) AMOC POWER PLUS (Dexron III-G34291)
Product Characteristics:
Test Method Unit Specification
Density @ 15 °C ASTM D4052 g/ml Reported
Kin. viscosity @ 40 °C ASTM D445 mm2/s(cSt) Reported
Kin. viscosity @ 100 °C ASTM D445 mm2/s(cSt) 6.8 - 8.4
Viscosity Index ASTM D2270 MIN 160
Brookfield Viscosity @ -40 °C ASTM D-2983 C.P. Max 20000
Flash Point C. O. C. ASTM D92 °C MIN 170
Pour Point ASTM D97 °C Max -42
Colour ASTM ASTM D1500 6 - 8
Acid Number ASTM D664 Mg KOH/g Reported
Water Content ASTM D95 %(V/m) Nil
Copper Strip Corrosion (3 hrs @ 150oC)
ASTM D130 rating max 1b
Foaming Characteristics Sequence I Sequence II Sequence III
ASTM D892 m/s Max. 100/0 Max. 100/0 Max. 100/0
Appearance Visual Red & bright
Approvals & Quality Levels: AMOC Power Plus is approved by ZF TE-ML14A&TE-ML04D and Voith H55.6335.xx for DIWA Transmission.
It also meets the requirements of General Motors G-34291, Allison C4 29521 04, Ford Mercon M030701, MAN 339-
V1and Z1.
AMOC Power Plus IIIG passes all GM performance tests (Oxidation, Cycling, Plate Clutch Friction, Band Clutch tests).
Miscibility & Compatibility: Completely miscible with other approved ATF Dexron III products. Compatible with all types of Rubber and Seals.
Application: AMOC Power is suitable for all transmission American, European, and Japanese power steering boxes and other applications where ATF Dexron III is recommended. Product Origin: Egypt.
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 8 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
6 - PARAFFIN WAX UNHYDROTREATED FULLY REFINED AW (520-540-560-580-600):
Product Characteristics:
Test Method Unit AW 520 AW 540 AW 560 AW 580 AW 600
Density @ 15 ° C ASTM D4052
g/ml Reported Reported Reported Reported Reported
Kin.viscosity@100°C ASTM D445
mm2/s(cSt) Reported Reported Reported Reported Reported
Flash Point C.O.C ASTM D92
°C Reported Reported Reported Reported Reported
Congealing point ASTM D938
°C 52 / 54 54 / 56 56 / 58 58 / 60 60 / 66
Penetration @ 25°C ASTM D1321
mm/10 Max. 20 Max. 20 Max. 20 Max. 20 Max. 20
Oil Content ASTM D721
% Wt Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5
Solvent Content ASTM D4626
ppm Max. 400 Max. 400 Max. 400 Max. 400 Max. 400
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 9 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
7 - PARAFFIN WAX HYDROTREATED FULLY REFINED AW (520-540-560-580-600):
Product Characteristics:
Test Method Unit AW 520 AW 540 AW 560 AW 580 AW 600
Density @ 15 ° C ASTM D4052
g/ml Reported Reported Reported Reported Reported
Kin.viscosity@100°C ASTM D445
mm2/s(cSt) Reported Reported Reported Reported Reported
Flash Point C.O.C ASTM D92
°C Reported Reported Reported Reported Reported
Saybolt Colour ASTM D6045
- Min. +26 Min. +26 Min. +26 Min. +26 Min. +26
Congealing point ASTM D938
°C 52 / 54 54 / 56 56 / 58 58 / 60 60 / 66
Penetration @ 25°C ASTM D1321
mm/10 Max. 20 Max. 20 Max. 20 Max. 20 Max. 20
Oil Content ASTM D721
% Wt Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5 Max. 0.5
Solvent Content ASTM D4626
ppm Max. 10 Max. 10 Max. 10 Max. 10 Max. 10
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 10 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
8 - PARAFFIN WAX UNHYDROTREATED FULLY REFINED AWU (540-600):
Product Characteristics:
Test Method Unit AW 540 AW 600
Density @ 15 ° C ASTM D4052 g/ml Reported Reported
Kin.viscosity@100°C ASTM D445 mm2/s(cSt) Reported Reported
Flash Point C.O.C ASTM D92 °C Reported Reported
Congealing point ASTM D938 °C 54 / 58 60 / 66
Penetration @ 25°C ASTM D1321 mm/10 Max. 20 Max. 20
Oil Content ASTM D721 % Wt Max. 0.5 Max. 0.5
Solvent Content ASTM D4626 ppm Max. 400 Max. 400
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 11 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
9 - PARAFFIN WAX HYDROTREATED SEMI REFINED AW SRW 600:
Product Characteristics:
Test Method Unit Specification
Density @ 15 ° C ASTM D4052 g/ml Reported
Kin.viscosity@100°C ASTM D445 mm2/s(cSt) Reported
Flash Point C.O.C ASTM D92 °C Reported
Saybolt Colour ASTM D6045 - Min. +25
Congealing point ASTM D938 °C 60 / 66
Penetration @ 25°C ASTM D1321 mm/10 22 - 28
Oil Content ASTM D721 % Wt Max. 1.5
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 12 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
10 – SLACK WAX:
Product Characteristics:
Test Method Unit Specification
Density @ 15 ° C ASTM D4052 g/ml Reported
Kin.viscosity@100°C ASTM D445 mm2/s(cSt) Max. 8.0
Flash Point C.O.C ASTM D92 °C Min. 200
ASTM Colour ASTM D1500 - Max. 2
Oil Content ASTM D721 % Wt Max. 18
Congealing point ASTM D938 °C Min. 40
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 13 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
11 – LIQUIFIED PETROLEUM GAS (LPG):
Product Characteristics:
Test Method Unit Specification
Density @ 15 °C ASTM D1657 kg/cm3 Reported
Reid Vapor Pressure @50 °C ASTM D1267 kg/cm2 MAX.10 (SUMMER) MAX.11.5 (SPRING&AUTUMN) MAX.12.8 (WINTER)
Volatility, 95% vol evaporated
ASTM D1837 °C MAX.17°C(SUMMER) MAX.8°C(SPRING&AUTUMN) MAX.4°C(WINTER)
Hydrogen Sulphide ASTM D2420 %wt Nil
Mercaptan Sulphur IP 272 %wt 0.003-0.008
SUMMER: MAY, JUNE, JULY, AUGUST, SEPTEMBER
SPRING: MARCH, APRIL
AUTUMN: OCTOBER, NOVEMBER
WINTER: DECEMBER, JANUARY, FEBRUARY
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 14 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
12 - NAPHTHA
Product Characteristics:
Test Method Unit Specification
DENSITY@15 °C ASTM D4052 g/ml 0.680
COLOUR ASTM D6045 Saybolt Min. +25
R.V.P @ 100 OF ASTM D323 Kg/cm2 Max. 0.80
TOTAL SULPHUR ASTM D4294 % Wt Max. 0.03
GUM CONTENT ASTM D381 mg/100ml Max. 1
LEAD CONTENT ASTM D3237 / IP 224 ppb Max. 7
OCTANE NO ASTM D2699 RON Min. 55
DISTILLATION
I. B. P
ASTM D86 °C
35 - 40
10% DISTILLED @ Max. 55
50% DISTILLED @ Max. 80
90% DISTILLED @ Max. 130
F.B.P. Max. 180
PONA ANALYSIS
OLEFINS
ASTM D6730 % VOL
Max. 1
NAPHTHENES Min. 5
AROMATICS 1 - 4
PARAFFINS Balance
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 15 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
13 – LOW POUR POINT GAS OIL:
Product Characteristics:
Test Method Unit Specification
DENSITY@15 °C ASTM D4052 g/ml Reported
COLOUR ASTM D1500 - Max. 4.0
SULPHUR, TOTAL ASTM D4294 % Wt Max. 0.15
FLASH POINT ASTM D93 °C Min. 55
POUR POINT
DEC, JAN, FEB, MAR
ASTM D97 °C
Max. 3
APR, MAY, OCT, NOV Max. 9
JUN, JUL, AUG, SEP Max. 15
VISCOSITY R-1 @ 100 °F IP 70 Sec. Max 50
WATER AND SEDIMENT ASTM D2709 % Vol Max. 0.10
DISTILLED @ 350 °C ASTM D86 % Vol Min. 50
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 16 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
14 – GAS OIL, EGYPTIAN STANDARD No. 16 (2013) :
Product Characteristics:
Test Method Unit Specification
Relative Density @ 60/60 °F D-1298 - Reported
Flash Point P.M.C.C. D-93 °C Min. 55
Kin. vis. @ 40 °C D-445 mm2/s(cSt) 1.60-7.00
Redwood Viscosity 1 @ 40 °C IP-70 Sec 30-43
Colour ASTM D-1500 - Max. 4
Sulphur ,Total D-4294 % mass Max. 1.00
POUR POINT
DEC, JAN, FEB, MAR
ASTM D97 °C
Max. 3
APR, MAY, OCT, NOV Max. 9
JUN, JUL, AUG, SEP Max. 15
WATER AND SEDIMENT ASTM D2709 % Vol Max. 0.10
WATER AND SEDIMENT ASTM D2709 % Wt Max. 0.10
DISTILLED @ 350 °C ASTM D86 % Vol Min. 85
Carbon Residue D-4530 % mass Max. 0.10
Ash Content D-482 % mass Max. 0.01
Corrosion Copper Strip (3 hrs @ 100 °C)
D-130 rating Max. 1
Inorganic Acidity and Bases IP-182 mg KOH/g NIL
Heat of combustion D-4868 MJ/Kg 44.3
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 17 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
15 - FUEL OIL, EGYPTIAN STANDARD No. 17 (2007)
Product Characteristics:
Test Method Unit Specification
Relative Density @ 60/60°F ASTM D1298 - Max. 0.995
Kin. Viscosity @50°C ( Winter) (Summer)
ASTM D445 mm2/s(cSt) 200.0 * 250.0**
Flash Point P.M.C.C. ASTM D93 °C Min. 65
Viscosity R-1 @100°F ( Winter) ( Summer)
IP 70 Sec 1700*
2200**
Water & Sediment ASTM D4007 %Vol Max. 1.0
Heat of combustion ASTM D4868
Gross Heat of combustion MJ/Kg Min.42
Net Heat of combustion Kcal. /Kg Min. 10000
* Winter: from 1st of November to end of March
** Summer: from 1st of April to end of October
Note: Upper Egypt Region:
Winter from 16th November to 14th March.
Summer from 15th March to 15th November.
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 18 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
16 – BASE OIL SN (150)
Product Characteristics:
Test Method Unit Specification
Density @ 15 °C D-4052 g/ml Reported
Kin. vis. @ 100 °C D-445 mm2/s(cSt) 4.5 - 5.5
Kin. vis. @ 40 °C D-445 mm2/s(cSt) Reported
Viscosity Index D-2270 Min. 95
Flash Point C. O. C. D-92 °C Min. 200
Pour Point D-97 °C Max. -6
Colour ASTM D-1500 Max. 1.0
Acid Number D-664 mg KOH/g Max. 0.05
Conradson Carbon D-189 %mass Max. 0.05
Ash Content D-482 % mass Max. 0.05
Sulphur D-4294 % mass Max. 0.2
Aromatics % D-3238 Max. 10
Water Content D-6304 ppm Max. 100
Copper Corrosion (3h@100°C)
D-130 rating Max. 1
Appearance Visual Clear & bright
Crude Origin: Egyptian
Refining Process: Solvent refining, solvent dewaxing & hydro-finishing
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 19 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
17 – BASE OIL SN (400/500)
Product Characteristics:
Test Method Unit Specification
Density @ 15 °C D-4052 g/ml Reported
Kin. vis. @ 100 °C D-445 mm2/s(cSt) 9.3 - 10.0
Kin. vis. @ 40 °C D-445 mm2/s(cSt) Reported
Viscosity Index D-2270 Min. 95
Flash Point C. O. C. D-92 °C Min. 220
Pour Point D-97 °C Max. -3
Colour ASTM D-1500 Max. 2.0
Acid Number D-664 mg KOH/g Max. 0.05
Conradson Carbon D-189 %mass Max. 0.05
Ash Content D-482 % mass Max. 0.05
Sulphur D-4294 % mass Max. 0.3
Aromatics % D-3238 Max. 10
Water Content D-6304 ppm Max. 100
Copper Corrosion (3h@100°C)
D-130 rating Max. 1
Appearance Visual Clear & bright
Crude Origin: Egyptian
Refining Process: Solvent refining, solvent dewaxing & hydro-finishing
Doc. No. QCI-08-05-95 Issue date: 18-08-2021 Rev. No. 21 Page 20 of 20
PRODUCT SPECIFICATION SHEET
Website: www.amoceg.com E-mail: [email protected]
(AMOC), EL-SAD EL-ALI STREET, WADY EL-KAMAR, P.O.BOX ( 5 ) EL MAX, ALEXANDRIA, EGYPT. TEL : 03/ 3105646 –3105647 - FAX : 03/3105651 – 4404183
Product Description:
18 – BASE OIL SN (600/700)
Product Characteristics:
Test Method Unit Specification
Density @ 15 °C D-4052 g/ml Reported
Kin. vis. @ 100 °C D-445 mm2/s(cSt) Reported
Kin. vis. @ 40 °C D-445 mm2/s(cSt) 100 - 130
Viscosity Index D-2270 Min. 95
Flash Point C. O. C. D-92 °C Min 230
Pour Point D-97 °C Max -3
Colour ASTM D-1500 Max 2.0
Acid Number D-664 mg KOH/g Max 0.05
Conradson Carbon D-189 %mass Max 0.05
Ash Content D-482 % mass Max 0.05
Sulphur D-4294 % mass Max 0.3
Aromatics % D-3238 Max. 10
Water Content D-6304 ppm Max. 100
Copper Corrosion (3h@100°C)
D-130 rating Max. 1
Appearance Visual Clear & bright
Crude Origin: Egyptian
Refining Process: Solvent refining, solvent dewaxing & hydro-finishing