Download - Product Family Specifications for fiber
-
7/30/2019 Product Family Specifications for fiber
1/8
Available with high-
performance connectors
or splicing solutions
Environmentally stable
Low insertion loss
Long-term reliability
features and benefits |
Telcordia GR-1209 and GR-1221
standards |
Coupler Cassette| Photo CNPSS1523Single-Width (ECL) and Double-Width (EC2)Eclipse Hardware Modules| Photo ICH106
SPECIFICATION SHEET EVO-411-EN | PAGE 1
Passive Optical ComponentsPassive Optical Components
Corning Cable Systems offers a full line of passive opti-
cal products designed for maximum network flexibility
and performance. Available components include cou-
plers, planar splitters and wavelength division multi-
plexers (WDMs).
Modern network architectures often require widespread
deployment of passive optical devices (WDM, splitters,
couplers) in the field to maximize system reach while
reducing the cost of expensive electronics. Due to the
critical nature of these components, network perfor-
mance is largely dependent upon the performance and
reliability of the couplers, especially when installed in an
outside plant environment.
Couplers and splitters are available with port counts
from 1x2 to 2x32. Custom circuits can be created with
any number of unequal power outputs or can be creat-
ed by concatenating couplers of various ratios. Couplers
are available on connectorized rack-mountable shelves
(continued)
A CorningSolutions Product
-
7/30/2019 Product Family Specifications for fiber
2/8
SPECIFICATION SHEET EVO-411-EN | PAGE 2
Passive Optical ComponentsPassive Optical Components
shelf specifications |
or modules or a variety of cassettes that are compatible
with Corning Cable Systems hardware product lines.
Corning Cable Systems expertise in fiber optics and
advanced production techniques yields consistent, high-
performance products which are stable across a wide
range of environmental conditions.
High-Density Coupler ShelvesCorning Cable Systems offers the space-saving high-
density coupler shelf that can be mounted in a single
rack space. This shelf can accommodate up to 22
inputs and outputs using standard simplex connectors
and is also available in a double-high (2RU) configura-
tion for even greater coupler density. Additional capacity
can also be gained through the use of duplex adapters.
The high-density coupler shelf is compatible with our full
line of fiber optic hardware, including: Eclipse, LDC and
FDC product families or any EIA standard 19- or 23-in
rack. The shelf also provides shielded jumper protection
and a slide-forward design for easy access to optical
jumpers and pigtails.
Eclipse Hardware Coupler Shelf| Photo ICH208
Product Type Shelf Color Shelf Size H x W x D cm (in)
1BL Black (Eclipse) 4.3 x 49.9 x 30.4 (1.7 x 16.9 x 12)
1PL Platinum (LDC) 4.3 x 49.9 x 30.4 (1.7 x 16.9 x 12)
1BE Beige (FDC & ACH) 4.3 x 49.9 x 30.4 (1.7 x 16.9 x 12)
2BL Black (Eclipse) 8.6 x 42.9 x 30.4 (3.4 x 16.9 x 12)
2PL Platinum (LDC) 8.6 x 42.9 x 30.4 (3.4 x 16.9 x 12)
2BE Beige (FDC & ACH) 8.6 x 42.9 x 30.4 (3.4 x 16.9 x 12)
Product Code
Shelf Code 1U
ES
LS
FS
Shelf Code 2U
EH
LH
FH
Maximum Port Count: 22 ports total - SC Simplex Adapters (ports serve up to (7) 1x2s)34 ports total - SC Duplex Adapters (ports serve up to (11) 1x2, or (1) 2x32) Pigtail inputs/outputs also available
Maximum Port Count: 44 ports total - SC Simplex Adapters (ports serve up to (14) 1x2, or (1) 2x32)68 ports total - SC Duplex Adapters (ports serve up to (22) 1x2, or (2) 2x32) Pigtail inputs/outputs also available
A CorningSolutions Product
-
7/30/2019 Product Family Specifications for fiber
3/8
SPECIFICATION SHEET EVO-411-EN | PAGE 3
Passive Optical ComponentsPassive Optical Components
Coupler ModulesCorning Cable Systems also offers a wide selection of
coupler housings and modules which are compatible with
our full line of fiber optic hardware including: Eclipse,
LDC, FDC and CCH product family connector housings
which can be mounted to any EIA standard 19- or 23-in
Eclipse Module| Photo ICH302FD8- and FDC-StyleModules| Photo HWPPP1323
LDC Coupler Module|Photo HWPPP1325
Configurations Product Product Product Module Color SCPorts* TypicalMax Pigtail ModuleSizes Housing
Family Code Family Description #Devices Ports HxWxD(in) PartNumbers
Eclipse EM ECL Single Wide Black 6 (2) 1x2, 5 5.1 x 1.4 x 6.7 ECL-C4UHardware (1) 1x4
ED EDD Double Wide 14 (4) 1x2, 6 5.1 x 2.8 x 6.7(1) 1x8
LDC LM LDC Single Wide Platinum 7 (2) 1x2, 7 5.1 x 1.1 x 5.8 LDC-CMH-072(1) 1x4
LD LDD Double Wide 14 (4) 1x2, 16 5.1 x 2.3 x 5.8(1) 1x8
FDC FM FDC Standard Height Beige 6 (2) 1x2, 7 6.0 x 1.4 x 6.4 FDC-CMH-072Hardware (1) 1x4
FL FDC Longer Height 7 (2) 1x2, 16 7.5 x 1.4 x 6.4 FDC-CMH-096(1) 1x4
LANscape DM DMC CCH Module Black 6 (2) 1x2 10 1.4 x 6.1 x 6.0 CCH-04USolutions (1) 1x4
module specifications |
rack. The use of coupler housings and modules provides
modularity in a small footprint for your network, allowing
expansion as needed by adding couplers via single- or
double-wide modules. Modules can be configured with
either adapter or pigtail inputs and outputs with a variety
of high-performance connector options.
*Other form-factor connectors available
A CorningSolutions Product
-
7/30/2019 Product Family Specifications for fiber
4/8
SPECIFICATION SHEET EVO-411-EN | PAGE 4
Passive Optical Components
Coupler CassettesCorning Cable Systems also offers a wide selection of
coupler cassettes and trays which are designed for use
with our full line of closure products or in other applica-
tions where space constraints are an issue. Coupler
cassettes may be purchased with connectorized pigtails
or with 250 m fibers protected in transport tubing for
ready-to-splice configurations.
cassette specifications |
Product Shelf Product Shelf SizeCode Code Family Fiber Protection Cassette Configurations H x W x D (in)
CF SCA SCA-9T24 Transport Tubing Bare 250 m fiber - available on all configurations; 8.8 x 3.9 x 0.4
SCF-4C18 or 2 mm must be used on splitters 1x16 and greater fiber
SCT-6C22-F Jacketing counts. Used on connectorized cassettes with
SCF-ST-116 total fiber count under 10. Cannot be used on
higher fiber counts.
Based on M67-117 splice tray. Cassette
accommodates up to 10 CWDM filters or one
1x32 splitter
C4 UC4 UCA4 Transport Tubing Bare 250 m fiber - available on all configurations; 7.4 x 3.5 x 0.4Terminals or 2 mm must be used on splitters 1x16 and greater fiber
Jacketing counts. Used on connectorized cassettes withtotal fiber count under 10. Cannot be used on
higher fiber counts.
Cassette accommodates up to 8 CWDM filtersor one 1x32 splitter.
CZ UCA UCA0 Transport Tubing Bare 250 m fiber - available on all configurations; 7.4 x 3.5 x 3Terminals or 2 mm must be used on splitters 1x16 and greater fiber
Jacketing counts. Used on connectorized cassettes withtotal fiber count under 10. Cannot be used onhigher fiber counts.
Cassette accommodates up to 8 CWDM filtersor one 1x32 splitter.
A CorningSolutions Product
-
7/30/2019 Product Family Specifications for fiber
5/8
Passive Optical Components
SPECIFICATION SHEET EVO-411-EN | PAGE 5
Passive Optical Components
coupler/splitter specifications |
* Values provided do not include connectors.
Chart A Equal Splits
Dual WindowWideband Wavelength Range Typical IL* Max IL* Uniformity* Return Loss Directivity PDL
1x2 Splitter 1260-1360 and 3.20 3.60 0.70 55 50 0.201480-1580 nm
2x4 Splitter 1260-1360 and 6.30 7.80 1.6 55 50 0.301480-1580 nm
2x8 Splitter 1260-1360 and 10.2 11.00 2.00 55 55 0.201480-1580 nm
1x4 Splitter 1260-1360 and 6.60 7.00 0.80 55 55 0.201480-1625 nm
1x8 Splitter 1260-1360 and 9.80 10.40 1.00 55 55 0.201480-1625 nm
1x16 Splitter 1260-1360 and 10.2 11.00 2.00 55 55 0.201480-1625 nm
1x32 Splitter 1260-1360 and 15.70 17.10 1.50 55 55 0.301480-1625 nm
2x16 Splitter 1260-1360 and 13.30 14.50 2.30 55 55 0.401480-1625 nm
2x32 Splitter 1260-1360 and 17.00 17.50 2.50 55 55 0.401480-1625 nm
Chart B Raw 1x2 Couplers for Building Custom Modules
Dual Window InputNarrowband Wavelength Range Max IL* Uniformity* Return Loss Directivity PDL
95/5 1300-1320 and 0.5/16.0 N/A 55 50 0.201540-1560 nm
90/10 1300-1320 and 0.9/10.8 N/A 55 50 0.201540-1560 nm
85/15 1300-1320 and 1.2/9.6 N/A 55 50 0.201540-1560 nm
80/20 1300-1320 and 1.3/8.2 N/A 55 50 0.201540-1560 nm
75/25 1300-1320 and 1.6/7.2 N/A 55 50 0.201540-1560 nm
70/30 1300-1320 and 1.9/6.0 N/A 55 50 0.201540-1560 nm
65/35 1300-1320 and 2.3/5.3 N/A 55 50 0.201540-1560 nm
60/40 1300-1320 and 2.6/4.7 N/A 55 50 0.201540-1560 nm
55/45 1300-1320 and 3.1/4.1 N/A 55 50 0.201540-1560 nm
50/50 1300-1320 and 3.5/3.5 0.60 55 50 0.201540-1560 nm
A CorningSolutions Product
-
7/30/2019 Product Family Specifications for fiber
6/8
Passive Optical Components
SPECIFICATION SHEET EVO-411-EN | PAGE 6
Passive Optical Components
coupler/splitter specifications | continued
ordering information |
Average insertion loss values measured at the specified center wavelengths (1310 and/or1550 nm) at room temperature
Maximum insertion loss value for the device over entire operating wavelength andtemperature range and at all states of polarization
The maximum difference between the leg of the coupler with the highest insertionloss and the leg with the lowest insertion loss
Variation of the couplers insertion loss with varying states of polarization of the signal
0.2 dB Typical, 0.5 dB Max
Ultra PC: -55 dB Max
Angled PC: -65 dB Max
Typical Insertion Loss
Maximum Insertion Loss
Uniformity
PDL (PolarizationDependent Loss)
Single-Mode Connector
Insertion Loss
Reflectance
Table A:
Codes for Quantities(includes quantities less than 9)
1 = 1 J = 182 = 2 K = 193 = 3 L = 204 = 4 M = 21
5 = 5 N = 226 = 6 P = 237 = 7 Q = 248 = 8 R = 259 = 9 S = 26A = 10 T = 27B = 11 U = 28C = 12 V = 29D = 13 W = 30E = 14 X = 31F = 15 Y = 32G = 16 Z = 33H = 17
Examples:
1018 = One (1x8)2014 = Two (1x4)
5012 = Five (1x2)
C012 = Twelve (1x2)
A CorningSolutions Product
-
7/30/2019 Product Family Specifications for fiber
7/8
SPECIFICATION SHEET EVO-411-EN | PAGE 7
Passive Optical Components
ordering information |
Equal Splits
|1Select product code(see charts for shelves,modules or cassettes).
|2Select coupler opticalspecifications/testwavelength).S = Dual window
(1310 and 1550 nm)wideband (see Chart A)
1 = Dual window(1310 and 1550 nm)narrowband (see Chart B)
|4Select inputconfiguration.
A = Adapter (modules and
shelves only)B = 3 mm jacketed fiber
(pigtailed modules only)
C = 2 mm jacketed fiber(cassettes only)
T = Transport tubing -cassettes only (defaultfor 250 m fiber)
|11Select couplerconfiguration.012 = 1x2022 = 2x2013 = 1x3014 = 1x4
024 = 2x4015 = 1x5016 = 1x6018 = 1x8028 = 2x8110 = 1x10112 = 1x12116 = 1x16216 = 2x16132 = 1x32232 = 2x32
Examples:1018 = One (1x8)
2014 = Two (1x4)
5012 = Five (1x2)C012 = Twelve (1x2)
|10Select number ofdevices; see Table Aand examples on Page6. (Ensure maximumnumber of ports notexceeded for productcode entered in Option1.)
Note:1) Other lengths available
|6Select input connector/adapter code.3C = SC UPC (single-mode,
ceramic insert)6C = SC APC (single-mode,
ceramic insert)59 = SC UPC duplex (single-
mode, ceramic insert)D9 = SC APC duplex (single-
mode, ceramic insert)A9 = LC UPC duplex (single-
mode, ceramic insert
|3Select module options(input/output options).1 = Input front/output front
(default for all cassettesand shelves)
4 = Input rear/output front(CCH only)
|5Select outputconfiguration.
A = Adapter (modules andshelves only)
B = 3 mm jacketed fiber(pigtailed modules only)
C = 2 mm jacketed fiber(cassettes only)
T = Transport tubing -cassettes only (defaultfor 250 m fiber)
|1 |2 |3 |4 |5 |8|6 |7 |9 |10 |11
|7Select input pigtaillength (in meters).0 = No pigtails (default for
adapter input)
1 = Standard lengthSee Note 1.
|8Select output connector/adapter code.3C = SC UPC (single-mode,
ceramic insert)6C = SC APC (single-mode,
ceramic insert)
59 = SC UPC duplex (single-mode, ceramic insert)
D9 = SC APC duplex (single-mode, ceramic insert)
A9 = LC UPC duplex (single-mode, ceramic insert
|9Select output pigtaillength (in meters).0 = No pigtails (default for
adapter outputs)1 = Standard length
See Note 1.
A CorningSolutions Product
-
7/30/2019 Product Family Specifications for fiber
8/8
SPECIFICATION SHEET EVO-411-EN | PAGE 8
Passive Optical Components
Corning Cable Systems LLC PO Box 489 Hickory, NC 28603-0489 USA
800-743-2675 FAX: 828-325-5060 International: +1-828-901-5000 www.corning.com/cablesystems
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. Eclipse, FDC and
LANscape are registered trademarks of Corning Cable Systems Brands, Inc. Corning is a registered trademark of Corning Incorporated. All other trademarks are the properties of their
respective owners. Corning Cable Systems is ISO 9001 certified. 2006, 2012 Corning Cable Systems. All rights reserved. Published in the USA. EVO-411-EN / March 2012
ordering information |
Unequal Splits
|1Select product code(see charts for shelves,modules or cassettes).
|2Select coupler opticalspecifications/testwavelength).S = Dual window
(1310 and 1550 nm)wideband (see Chart A)
1 = Dual window(1310 and 1550 nm)narrowband (see Chart B)
|4Select input configuration.
A = Adapter (modules andshelves only)
B = 3 mm jacketed fiber(pigtailed modules only)
C = 2 mm jacketed fiber(cassettes only)
T = Transport tubing -cassettes only (defaultfor 250 m fiber)
Notes:1) Other lengths available.
2) If single 50/50 1x2 split is
required, use code 1012 from
equal split part number
configuration.
3) Call Customer Service for
assistance with unequal ratio split
coupler configurations. Outputs
can be specified using percent-
age of power for each output port
to develop custom part number
configurations.
|6Select input connector/adapter code.3C = SC UPC (single-mode,
ceramic insert)6C = SC APC (single-mode,
ceramic insert)
59 = SC UPC duplex (single-mode, ceramic insert)
D9 = SC APC duplex (single-mode, ceramic insert)
A9 = LC UPC duplex (single-mode, ceramic insert
|3Select module options.(input/output options).1 = Input front/output front
(default for all cassettesand shelves)
4 = Input rear/output front(CCH only)
|5Select outputconfiguration.
A = Adapter (modules andshelves only)
B = 3 mm jacketed fiber(pigtailed modules only)
C = 2 mm jacketed fiber(cassettes only)
T = Transport tubing -cassettes only (defaultfor 250 m fiber)
|1 |2 |3 |4 |5 |8|6 |7 |9 |10
|7Select input pigtaillength (in meters).0 = No pigtails (default for
adapter input)1 = Standard lengthSee Note 1.
|8Select output connector/adapter code.3C = SC UPC (single-mode,
ceramic insert)6C = SC APC (single-mode,
ceramic insert)59 = SC UPC duplex (single-
mode, ceramic insert)D9 = SC APC duplex (single-
mode, ceramic insert)A9 = LC UPC duplex (single-
mode, ceramic insert
|9Select output pigtaillength (in meters).0 = No pigtails (default for
adapter outputs)1 = Standard lengthSee Note 1.
|10Select coupler configuration.
A = 5/95B = 10/90C = 15/85D = 20/80E = 25/75F = 30/70
G = 35/65H = 40/60J = 45/55K = 50/50*
A22 = 2x2 95/5B22 = 2x2 90/10C22 = 2x2 85/15D22 = 2x2 80/20E22 = 2x2 75/25F22 = 2x2 70/30G22 = 2x2 65/35H22 = 2x2 60/40J22 = 2x2 55/45X = Input of next coupler
is spliced to high-power leg of currentcoupler
XX = Input of next coupler isspliced to high-powerleg of previous coupler
/ = Input of next coupler isspliced to high-powerleg of first coupler orfirst coupler afterprevious /
- = Input of next coupleris spliced to next inputport (multi-input only)
W = 1310 +/-10,1550 +/-10 WDM
T = Triplexer 1310 +/-50,
1490 +/-15,1550 -10/+15
See Notes 2, 3.
A CorningSolutions Product