DSE-0100.1 – Indexing Turntable UT-1000 © 2017 Oerlikon Metco 1
Product Data SheetUT-1000 Series Heavy-Duty Indexing Turntables
The UT-1000 is a single-axis, heavy-duty indexing turntable designed to withstand the rigors of thermal spray processing. UT-1000 is designed to precisely, accurately and repeatedly position large, heavy parts, even if the load is significantly asymmetrical. UT-1000 can be configured for integration with a robot, with the UT-1000 axis programmable as part of the robotic motion program.
The Oerlikon Metco UT-1000 Turntable is designed to hold rotationally symmetrical workpieces such as shafts, turbine parts or other workpieces that must be rotated or positioned during the coating process. Asymmetrical parts can also be rotated, within the allowable mass moment of inertia range of the turntable.
The UT-1000 is modular in its design. The 4 / 6-slot alumi-num, 1100 mm (43.3 in) face plate is configured to hold a wide range of parts. In addition, options are available to ex-pand the functionality of the UT-1000.
Rotation is completely integrated and recognized as robotic axes. This makes the UT-1000 suitable for a wide variety of applications. Thus, the rotational or indexing movement of the UT-1000 is coordinated with the robot movement, al-lowing even geometrically complex surfaces to be coated. Both clockwise and counterclockwise rotation is supported.
A second model, the UT-1000i, incorporates an onboard exhaust duct with a diameter of 300 mm (11.8 in) capable of extracting up to 3500 m3/h (123 600 ft3/h).
UT-1000 Indexing turntable
UT-1000i Indexing turntable
DSE-0100.1 – Indexing Turntable UT-1000 © 2017 Oerlikon Metco 2
1 General Description
1.1 ConstructionThe UT-1000 consists of the following main components:1. Chassis2. Rotation unit3. Face plate
Rotational movement is controlled, allowing for accurate and fast rotation and positioning of the workpiece in either a clockwise or counterclockwise direction. Various rotational drives are available, depending on the application.
The standard face plate is made of aluminum and precision manufactured with DIN T-slots for holding the workpiece.
1.2 Operating ModesThe rotary axis can be coordinated with the robot. The spe-cific modes are:
n Index positioning to predefined locations. The position of the face plate is coordinated with the movement of the robot axes. The turntable can be indexed clockwise or counterclockwise.
n Face plate rotated at a predefined speed. The robot con-troller starts the motion program at a predefined speed. The robot software allows a free choice of speeds in a clockwise or counterclockwise direction.
The movement of the axis can be programmed in either “teach” or off-line mode, depending on the control mode.
UT-1000 – Assemblies
UT-1000 – Axis Coordinates and Direction of Movement UT-1000
Face plate
Rotation unit
Chassis
Cover plates
Rotary axis
Linear movement with optional linear track
Exhaust outlet duct 3500 m3/hr
(123 600 ft3/h) extraction
Exhaust inlet Ø 300 mm (11.8 in)
UT-1000i Onboard Exhaust System
DSE-0100.1 – Indexing Turntable UT-1000 © 2017 Oerlikon Metco 3
Positioning Rotational Drive Face Plates
UT-10004 / 6 DIN T-Slots
Ø 1100 mm (43.3 in)Aluminum
Rotational drive motors for:n ABB Robots (Siemens drive)n FANUC Robotsn Yasakawa Robots
1.3 Overview of Configuration Options
Rotation, Index
UT-1000i4 / 6 DIN T-Slots
Ø 1100 mm (43.3 in)Aluminum
2 Features and Benefits
Effective n Stable rotational part handling for thermal spray systems n Allows accurate rotation and indexing in clockwise and
counterclockwise directions n Automated servo drive rotation
Efficient n Accepts parts as heavy as 1000 kg (2204 lb) n Positioning accuracy within ± 0.1° n Maximum moment of inertia of 300 kg·m2 (7119 lb·ft2) n Maximum workpiece diameter of 2500 mm (98.4 in) n Maximum centripetal force of 2000 N (450 lbf) n Robot teaching tool allows quick set up of motion pro-
gram and aids in calibration
Economical n Long life parts require little to no maintenance with bear-
ings designed to last for 16,000 hours n Modular construction allows for simple and cost-effective
upgrades and changes
Environmental n Zero-speed monitoring warns operator is the motor is tur-
ing but the face plate is not turning n Heavy-duty anchor system prevents tipping and ensures
perfect stability n Full integration into the E-stop circuit of the thermal spray
system ensures operator safety n UT-1000i optimizes air flow for internal spraying of very
large parts with its onboard exhaust system
DSE-0100.1 – Indexing Turntable UT-1000 © 2017 Oerlikon Metco 4
Manual Chuck
High Speed Chuck
3 Options and Accessories
Oerlikon Metco also offers a wide range of additional options and accessories, as well as customized features on request. Please refer to the product manual and the parts list for a complete list of spare parts.
Manual chuck attachment (Model UT-1000 only)The manual chuck attaches to the faceplate for easy mount-ing and coating of small, rotationally symmetrical workpieces.
Manual chuck
Chuck capacity 5 to 250 mm 0.19 to 9.84 in
max. workpiece mass 50 kg 110.23 lb
max. mass moment of inertia 0.75 kg·m2 17.8 lb·ft2
High-speed chuck attachment (Model UT-1000 only)The high-speed chuck attachment allows workpieces to be coated at higher rotational speeds.
High speed chuck attachment
Rotational speed 35 to 2100 rpm
Chuck capacity 3 to 125 mm 0.12 to 4.92 in
max. load (depending on rpm) 25 kg 55.12 lb
max. mass moment of inertia 0.075 kg·m2 1.78 lb·ft2
Programming Tip and Reference GaugeThe programming tip and reference gauge locate the posi-tion of the turntable face plate within the coordinate system of the robot.
Cooling Air Duct (Model UT-1000 only)The optionally available cooling air duct provides inner workpiece cooling.
Programming tip
Referencegauge
Programming Tip and Reference GaugeCooling Air Duct
Cooling air inlet Cooling air feedthrough
DSE-0100.1 – Indexing Turntable UT-1000 © 2017 Oerlikon Metco 5
4 Technical Data
4.1 Operating RegionsThese diagrams indicate maximum permissible operating conditions.
Ramp-up time
Rot
atio
nal S
peed
[rev
/min
]
Maximum Permissible Load Depending Workpiece Weight
Ø Workpiece [mm]
Maximum Permissible Rotational Speed Depending on Workpiece Diameter
300
016 s 16 s
Acceleration and Braking Curves at Maximum Rotational Speed
Ramp-down time
Rot
atio
nal S
peed
[rev
/min
]
Workpiece Weight [kg]
Maximum Permissible Rotational Speed Depending on Inertial Mass
Inertia [kg·m2]
Rot
atio
nal S
peed
[rev
/min
]
300
250
200
150
100
50
030050 150 2001000 250
2.0
1.5
1.0
0.5
0
Ang
ular
Acc
eler
atio
n [ra
d/s2 ]
Maximum Angular Acceleration Depending on Inertial Mass
30050 150 2001000
Inertia [kg·m2]
250
2500500 1500 200010000
300
250
200
150
100
50
0R
otat
iona
l Spe
ed [r
ev/m
in]
300
250
200
150
100
50
01000200 600 8004000
DSE-0100.1 – Indexing Turntable UT-1000 © 2017 Oerlikon Metco 6
4.3 Specifications
Weight and Payload
Total Weight 750 kg 1653 lb
Max. Payload a 1000 kg 2204 lb
Max. Moment of Inertia About the Rotational Axis a, b 300 kg·m2 7119 lb·ft2
Max. Workpiece Ø 2500 mm 98.4 in
Installation Type heavy duty ground anchors
Rotational Axis
Min. Rotational Speed b 5 rpm
Max. Rotational Speed b 300 rpm
Rotational Speed Precision b ± 2 rpm
Rotational Direction clockwise or counterclockwise
Max. Acceleration b 19 rpm/s
Acceleration Time to Max Rotational Speed a, b 16 s
Positioning b ± 0.1°
Drive Data
Rated Torque – Rotational Drive b (Pre-Transmission) 48 N·m 26.5 lbf·ft
Power Consumption – Rotational Drive b 8.2 kW
Environmental Conditions
Temperature +10 to +40 °C +50 to +104 °F
Humidity < 75 %; non-condensing
Exhaust Capability (Model UT-1000i only)
Inlet size 300 mm 11.8 in
Max. Extraction Rate 3500 m3/h 123 600 ft3/h
a See section 4.1 Operating Regions for limitationsb Depending on the control system
Information is subject to change without prior notice
www.oerlikon.com/metco [email protected]
4.2 Dimensions
Ø 1100 mm (43.3 in)
520
mm
(20.
5 in
)
100 mm (3.9 in)
1320 mm (52.0 in)