Product Catalogue
Jebsen & Jessen Offshore Pte Ltd 11 Tuas Crescent
Singapore 638705
Tel: +65 6779 3595
www.offshore.jjsea.com
Jebsen & Jessen Group of Companies South East Asia
Cable Technology • Chemicals • Communications • Life Sciences • Material Handling • Offshore • Packaging • Technology
List of Equipments Part A
Anchor Windlass
Anchor Windlass / Mooring Winch
Anchor Windlass / Towing Winch
Mooring Winch
Towing Winch
Anchor Handling / Towing Winch
Hydraulic Tugger Winch
Hydraulic Storage Reel
Hydraulic Vertical Capstan
Riser Pull-in or Chain Tensioning Winch
Part B
Fixed Boom Crane
Knuckle Boom Crane
Telescopic Boom Crane
Lattice Boom Crane
Part C
Swivel Fairlead
Vertical Leading Sheave
Horizontal Leading Sheave
Part D
“A” Frame
Shark Jaw
Towing Pin
Telescopic Gangway
Stern Roller
Wire Rope Spooler
Anchor Windlass
Design Features
a. Drive: Electric or electro-hydraulic motor
b. Windlass size: Chain size can be custom design to suit requirement at time of order
c. Configuration: Single or double gypsy c/w warping head
d. Brake: Manual
Model No. Rated Pull, 1st
Layer
Overload
Pull
(Ton)
Brake
Holding
(Ton)
Gypsy
center to
center
Main Dimension
L x W x H
JJ-HWL20U2-GG 1.9Ton x 9m/min 2.9Ton 11.3Ton 1200mm 2.6m x 1.1m x 1.2m
JJ-HWL22U2-GG 2.1Ton x 9m/min 3.2Ton 12.9Ton 1200mm 2.6m x 1.1m x 1.2m
JJ-HWL24U2-GG 3Ton x 9m/min 4.5Ton 22.0Ton 1200mm 2.6m x 1.1m x 1.2m
JJ-HWL-26U2GG 3Ton x 9m/min 4.5Ton 17.9Ton 1400mm 2.9m x 1.2m x 1.3m
JJ-HWL28U2-GG 5Ton x 9m/min 7.5Ton 20.6Ton 1400mm 2.9m x 1.2m x 1.3m
JJ-HWL30U2-GG 4.4Ton x 9m/min 5.7Ton 23.6Ton 1400mm 3.0m x 1.3m x 1.3m
JJ-HWL32U2-GG 4.5Ton x 9 m/min 6.8Ton 26.7Ton 1400mm 3.1m x 1.5m x 1.5m
JJ-HWL34U2-GG 5Ton x 9 m/min 7.5Ton 30.0Ton 1400mm 3.1m x 1.5m x 1.5m
JJ-HWL36U2-GG 5.7Ton x 9 m/min 8.6Ton 33.6Ton 1600mm 3.5m x 1.5m x 1.5m
JJ-HWL38U3-GG 6.3Ton x 9 m/min 9.5Ton 48.0Ton 1600mm 3.5m x 1.5m x 1.5m
JJ-HWL40U3-GG 8Ton x 9 m/min 12.0Ton 40.3Ton 2000mm 4.0m x 1.6m x 1.6m
JJ-HWL42U3-GG 7.7Ton x 9 m/min 11.6Ton 45.0Ton 2000mm 4.0m x 1.6m x 1.6m
JJ-HWL46U2-SG 9.2Ton x 9 m/min 13.8Ton 53.7Ton N.A. 4.0m x 1.8m x 1.9m
JJ-HWL52U2-SG 11.8Ton x 9 m/min 17.7Ton 67.9Ton N.A. 4.2m x 1.9m x 1.9m
Note : Gypsy Center to Center can be adjusted to suit vessel layout
Rated Pull can be increase for deeper water handling.
Anchor Windlass Mooring Winch
Design Features
a. Drive: Electric / VFD or electro-hydraulic motor
b. Configuration: Single or double gypsy combined with single or double mooring drum
c. Windlass size: Chain size not indicated below can be custom design to suit requirement at
time of order
d. Brake: Manual or hydraulic operated brake for mooring drum
e. Clutch: Manual or hydraulic operated
Model No.
Windlass Mooring Winch Main Dimension
( L x W x H) Gypsy
Size
Drum Capacity
(PP Rope)
Drum Pull @
1st layer
Brake
Holding
JJ-HWLMW32U2-
GDG-05B10 32U2 Dia. 44mm x 50m
5Ton x 15m/min 10Ton 3.6m x 1.7m x 1.7m
2Ton x 30m/min
JJ-HWLMW36U2-
GDG-10B15 36U2 Dia. 52mm x 50m
10Ton x 15m/min 15Ton 3.8m x 1.7m x 1.7m
4.5Ton x30m/min
JJ-HWLMW42U2-
GDG-15B25 42U2 Dia. 56mm x 50m
15Ton x 15m/min 25Ton 4.5m x 2.0m x 2.1m
8Ton x 30m/min
JJ-HWLMW52U2-
GDG-20B30 52U3 Dia. 110mm x 200m
20Ton x 10m/min 30Ton 4.5m x 2.0m x 2.1m
8Ton x 20m/min
Anchor Windlass Towing Winch
Design Features
a. Drive: Electric or electro-hydraulic motor
b. Windlass size: Chain size not indicated below can be custom design to suit requirement at
time of order
c. Configuration: Single or double gypsy combined with single, double or split drum
d. Capacity: Up to 300Ton rated line-pull & 450Ton brake holding on first layer
e. Brake: Manual or hydraulic control c/w fail safe brake
f. Clutch: Manual, hydraulic, friction or pneumatic type
g. Features: Design for various operational requirement including ESCORT Notation &
Ex-proof Hazardous zone operation
Model No.
Windlass Towing Winch Main Dimension
(L x W x H) Gypsy
Size
Drum Capacity
(PP Rope)
Drum Pull @
1st layer
Brake
Holding
JJ-HWLTW22U2-
GDG-10B120 22U2 Dia. 80mm x 150m
10Ton x 20m/min 120Ton 3.8m x2.4m x 2.2m
5Ton x 30m/min
JJ-HWLTW24U2-
GDG-20B150 24U2 Dia. 86mm x 150m
20Ton x 15m/min 150Ton 4.0m x 2.8m x 2.6m
8Ton x 30m/min
JJ-HWLTW32U2-
GDG-30B180 32U3 Dia. 96mm x 200m
30Ton x 15m/min 180Ton 4.2m x 3.0m x 2.8m
12Ton x 30m/min
JJ-HWLTW38U2-
GDG-50B200 38U3 Dia. 110mm x 200m
50Ton x 10m/min 200Ton 4.5m x 3.2m x 3.0m
20Ton x 20m/min
Mooring Winch
Design Features
a. Drive: Electric VFD or electro-hydraulic motor
a. Configuration: Single or double drum in side-by-side or waterfall arrangement
b. Capacity: Up to 500Ton line pull and brake of up to 700Ton on first layer
c. Brake: Manual, hydraulic or pneumatic type
d. Clutch: Manual, hydraulic or friction type
e. Features: Dynamic disc type water cooled drag brake for free-wheeling pay out; complete
with load and length monitoring system
f. Classification: Design & approved in accordance to ABS Circle P or DNV POSMOOR can
be arranged
Model No. Drum Capacity
(SWR)
Drum Pull @
1st layer
Brake
Holding Drag Brake
Main Dimension
( W x L x H)
JJ-HMW-SD-40B90 Dia. 38mm x 1000m 40Ton x 10m/min
90Ton 5Ton x
120m/min 3.1m x 3.1m x 2.2m 10Ton x 30m/min
JJ-HMW-SD-60B110 Dia. 42mm x 1000m
60Ton x 10m/min 110Ton
5Ton x
120m/min 3.4m x 3.4m x 2.2m
16Ton x 30m/min
JJ-HMW-SD-85B150 Dia. 52mm x 1500m
85Ton x 12m/min
150Ton 10Ton x
120m/min 4.4m x 4.6m x 2.6m 50Ton x 19m/min
28Ton x 32m/min
JJ-HMW-SD-125B200 Dia. 52mm x 1500m
125Ton x 11m/min
200Ton 20Ton x
120m/min 4.7m x 4.9m x 2.8m 75Ton x 16m/min
38Ton x 32m/min
Note: Larger drum pull capacity will be offered upon request
Towing Winch
Design Features
a. Drive: Electric VFD or electro-hydraulic motor
b. Configuration: Single, double or split drum
c. Capacity: Up to 250Ton rated line-pull and 500Ton brake holding on first layer
d. Brake: Hydraulic control fail safe brake
e. Clutch: Manual, hydraulic, friction or pneumatic type
f. Features : Design for Escort Notation and Ex-proof operation
Model No.
Towing Winch Main Dimension
( L x W x H) Drum Capacity
(SWR)
Drum Pull @ 1st
layer
Brake
Holding
JJ-HTW-SD-10B120 Dia. 42mm x 600m 10Ton x 20m/min
120Ton 2.6m x 2.5m x 2.2m 5Ton x 30m/min
JJ-HTW-SD-20B150 Dia. 52mm x 800m 20Ton x 15m/min
150Ton 3.1m x 2.9m x 2.6 m 8Ton x 30m/min
JJ-HTW-SD-30B180 Dia. 58mm x 800m 30Ton x 15m/min
180Ton 3.2m x 3.4m x 2.8m 12Ton x 30m/min
JJ-HTW-SD-50B200 Dia. 64mm x 1000m 50Ton x 10m/min
200Ton 3.2m x 3.5m x 2.8 m 20Ton x 20m/min
JJ-HTW-SD-75B200 Dia. 64mm x 1000m 75Ton x 10m/min
200Ton 3.5m x 3.6m x 3.0m 30Ton x 20m/min
Note: Capacity not indicated below table shall be provided on request.
Anchor Handling Towing Winch
Standard features include:
a. Drive: Electric VFD or electro-hydraulic (medium pressure up to 250bar)
b. Configuration: Single, double or triple drum in side-by-side or waterfall arrangement
c. Capacity: Up to 350Ton rated line-pull and 600Ton brake holding on first layer
d. Brake: Hydraulic operated fail-safe type brake, with manual over-right
e. Feature: Dynamic braking to facilitate high speed lowering
f. Other functions: Wire spooling; chain gypsy guide; grooved drums and emergency release
function
Model No. Drum Capacity Drum Pull @ 1st
layer
Brake
Holding
Main Dimension
( L x w x H)
JJ-HAHTW-WF-50B100 Dia. 38mm x 1000m 50T x 0~6m/min
100Ton 4.7m x 3.4m x 2.8m 12T x 0~24m/min
JJ-HAHTW-WF-75B120 Dia. 42mm x 1000m
75T x 0~8m/min 120Ton 5.1m x 4.0m x 3.3m
35T x 0~16m/min
JJ-HAHTW-WF-100B200 Dia. 56mm x 1000m
100T x 0~6m/min
200Ton 5.2m x 4.0m x 3.3m 50T x 0~12m/min
25T x 0~24m/min
JJ-HAHTW-WF-150B200 Dia. 56mm x 1000m
150T x 0~5m/min
200Ton 5.7m x 4.1m x 3.5m 100T x 0~7.5m/min
50T x 0~15m/min
20T x 0~30m/min
JJ-HAHTW-WF-200B300 Dia. 64mm x 1000m
200T x 0~6m/min
300Ton 6.5m x 5.4 m x 4.2m 110T x 0~16m/min
60T x 0~20m/min
20T x 0~42m/min
Note: Speed and drum capacity can be custom designed to suit customer
requirement at time of order
Hydraulic Tugger Winch
Design Features
a. Drive: Electric or electro-hydraulic motor
b. Capacity: Up to 50Ton line pull and brake of up to 100Ton on first layer
c. Brake: Manual or hydraulic type
d. Clutch: Manual or hydraulic type
Model No. Rated Pull, 1st
Layer
Drum
Capacity
Brake
Holding
Main Dimension
L x W x H
JJ-HTGW-SD-5B7.5 5 Ton x 15m/min 22mm x 250m 7.5 Ton 1.5m x 1.1m x 1.1m
JJ-HTGW-SD-10B15 10 Ton x 15m/min 24mm x 250m 15 Ton 1.9m x 1.4m x 1.4m
Note: Larger drum & line pull capacity will be offered upon request
Hydraulic Storage Reel
Design Features
g. Drive: Electric or electro-hydraulic motor
h. Capacity: Up to 50Ton line pull on first layer
i. Brake: Manual or hydraulic type
j. Clutch: Manual or hydraulic type
Additional Feature
a. Band brake can be provided to replace the standard manual control parking
stopper type brake.
Model No. Rated Pull, 1st
Layer Drum Capacity
Main Dimension
L x W x H
JJ-HSRW-SD-5T 5 Ton x 30m/min
52mm x 1500m or
2.5m x 2.1m x 2.2m 56mm x 1200m or
58mm x 1200m
JJ-HSRW-SD-10T 10 Ton x 20m/min 58mm x 1500m or
2.6m x 2.5m x 2.5m 64mm x 1200m
JJ-HSRW-SD-15T 15 Ton x 20m/min 68mm x 2500m or
2.9m x 3.2m x 3.2m 76mm x 2000m
Note: Larger drum & line pull capacity can be offered upon request
Hydraulic Vertical Capstan
Design Features
a. Drive: Electric or electro-hydraulic motor
b. Capacity: Up to 30Ton SWL
c. Feature: Local control stand, extended pendant or foot pedal operation can be provided
Model No. Rated Pull, 1st Layer Capstan Size Main Dimension
Ø x H
JJ-HVC-3T 3 Ton x 15m/min Ø 330mm 820mm x 880mm
JJ-HVC-5T 5 Ton x 15m/min Ø 400mm 900mm x 980mm
JJ-HVC-8T 8Ton x 15m/min Ø 400mm 920mm x 970mm
JJ-HVC-10T 10 Ton x 15m/min Ø 450mm 920mm x 1050mm
Note: Larger SWL capacity will be offered upon request
Riser Pull-in/Chain Tensioning Winch
Design Features
a. Design for FPSO, FSO, Semi-Submersible riser pull in or chain tensioning operation
b. Drive: Electric VFD or electro-hydraulic motor
c. Configuration: Travelling Trolley mounted winch, or sheaves, or portable with lifting frame
design
d. Brake: Service brake, Parking Brake and Emergency Brake, Hydraulic or electrical failsafe
type
e. Features: Load and Length monitoring, Constant Tension, Inching, Hazardous zone
possible
f. Size up to 700Ton SWL and brake of up to 1,000Ton
g. Classification: Design & approved in accordance to ABS, BV, LRS, DNV can be arranged.
Model No. Drum Capacity
(SWR)
Drum Pull @ 1st
Layer
Brake
Holding Main Dimension
JJ-HXW-SD-80B120 Dia. 48mm x 450m 80t x 6m/min 120T W2.5 x L3.0 x H2.8
JJ-HXW-SD-100B125 Dia. 52mm x 300m 100t x 6m/min 125T W2.9 x L3.3 x H2.8
JJ-HXW-SD-180B230 Dia. 64mm x 300m 180t x 4m/min 230T W3.4 x L3.4 x H3.2
JJ-HXW-SD-180B230 Dia. 82mm x 300m 180t x 4m/min 230T W3.6 x L3.6 x H3.2
JJ-HXW-SD-330B420 Dia. 105mm x 300m 300t x 3m/min 450T W4.5 x L4.0 x H4.4
JJ-HXW-SD-440B550 Dia. 130mm x 120m 440t x 3m/min 580T W4.5 x L4.0 x H4.4
Note: Capacity not indicated below table shall be provided on request.
Fixed Boom Crane
Design Features
a. Suitable for general cargo, hose handling, offshore platform and support vessel lifting
operations
b. Open platform control console or air-conditioned cabin type control room
c. Build in electro-hydraulic power pack
d. Design to meet International Classification Societies approval and to API2C standard
e. Crane can be custom build with Passive Heave or Active Heave Compensating (AHC)
f. Optional features: Man Riding capabilities and Descon Scoop operation
Model No
Lifting
Capacity
(T x m)
Min.
Length
R (m)
Max.
Length
R (m)
Pedestal
Dia. OD
(mm)
Pedestal
Height
H (mm)
Est.
Power
(kw)
FCRN40-2T8M 2T x 8m 2.7m 8m 920mm 1200mm 15kw
FCRN60-3T10M 3T x 10m 3.4m 10m 1020mm 1200mm 18.5kw
FCRN100-5T10M 5T x 10m 3.4m 10m 1270mm 1500mm 37kw
FCRN125-5T12M 5T x 12m 4.1m 12m 1420mm 1500mm 37kw
FCRN160-5Tx15M 5T x 15m 5.1m 15m 1620mm 1500mm 37kw
FCRN250-10Tx15M 10T x
15m 5.1m 15m 1820mm 1800mm 75kw
FCRN400-15Tx20M 15T x
20m 6.8m 20m 2020mm 1800mm 110kw
FCRN650-20Tx20M 20T x
20m 6.8m 20m 2260mm 1800mm 132kw
FCRN1300-25Tx25M 25T x
25m 8.5m 25m 2830mm 2000mm 160kw
FCRN1750-30Tx30M 30T x
30m 10.2m 30m 3170mm 2000mm 200kw
FCRN2600-40Tx35M 40T x
35m 12.0m 35m 4020mm 2200mm 250kw
Knuckle Boom Crane
Design Features
a. Design for general cargo,offshore lifting and deep sea operations
b. Open platform control console or air-conditioned cabin type control room
c. Active Heave Compensating (AHC) Or Passive Heave Compensating features
d. Build in electro-hydraulic power pack
e. Design for loads of up to 300T SWL with certification by International Classification
Societies and API2C standard.
f. SOFT Fiber Rope up to 5,000M water Depth available on request with Full DNV E407
Certification
Model No
Lifting
Capacity
(T x m)
Min.
Length
R (m)
Max.
Length
R (m)
Pedestal
Dia. OD
(mm)
Pedestal
Height
H (m)
Est.
Power
P (kw)
KCRN40-2T10M 2T x 10m 3.0m 10m 920mm 1200mm 15kw
KCRN60-3T10M 3T x 10m 3.0m 10m 1020mm 1200mm 18.5kw
KCRN100-5T10M 5T x 10m 3.0m 10m 1270mm 1500mm 37kw
KCRN160-5Tx15M 5T x 15m 4.2m 15m 1620mm 1500mm 37kw
KCRN250-10Tx12M 10T x 12m 3.5m 12m 1820mm 1800mm 75kw
KCRN400-15Tx12M 15T x 12m 3.5m 12m 2020mm 1800mm 110kw
KCRN650-20Tx15M 20T x 15m 4.2m 15m 2260mm 1800mm 132kw
KCRN1300-25Tx25M 25T x 25m 6.5m 25m 2830mm 2000mm 160kw
KCRN1750-30Tx25M 30T x 25m 6.5m 25m 3170mm 2000mm 200kw
KCRN2600-40Tx30M 40T x 30m 7.5m 30m 4020mm 2200mm 250kw
Note: Crane can be custom design and build to customer required specification
Telescopic Boom Crane
Design Features
a. Design for general cargo,offshore lifting and deep sea operations
b. Open platform control console or air-conditioned cabin type control room
c. Active Heave Compensating (AHC) Or Passive Heave Compensating features
d. Build in electro-hydraulic power pack
e. Design to meet International Classification Societies approval and to API2C
f. Optional features: Man Riding capabilities and Descon Scoop operation
Model No
Lifting
Capacity
(T x m)
Min.
Length
R (m)
Boom
Extended
R (m)
Pedestal
Dia. OD
(mm)
Pedestal
Height
H (mm)
Est.
Power
(kw)
TCRN60-2T12M 2T x 12m 2.7m 12m 920mm 1200mm 15kw
TCRN100-3T15M 3T x 15m 3.4m 15m 1020mm 1500mm 18.5kw
TCRN125-5T12M 5T x 12m 2.7m 12m 1420mm 1500mm 37kw
TCRN160-5Tx15M 5T x 15m 3.4m 15m 1620mm 1500mm 37kw
TCRN250-5Tx20M 5T x 20m 4.1m 20m 1820mm 1800mm 37kw
TCRN400-10Tx20M 10T x 20m 4.1m 20m 2020mm 1800mm 75kw
TCRN650-10Tx25M 10T x 25m 6.1m 25m 2260mm 1800mm 75kw
TCRN1300-15Tx30M 15T x 30m 6.1m 30m 2830mm 2000mm 110kw
TCRN1750-20Tx30M 20T x 30m 6.1m 30m 3170mm 2000mm 132kw
Note: Crane can be custom design and build to customer required specification
Lattice Boom Crane
Design Features
a. Design for general cargo, ship to ship and offshore lifting operations
b. Air conditional cabin type control room
c. Build in electro-hydraulic power-pack or Diesel Engine Driven
d. Explosion Proof Zone I and Zone II Design.
e. Design to meet International Classification Societies approval and to API2C standard
f. Crane can be built with Man-riding, Constant Tension, Heave compensation feature.
Model No Lifting
Capacity
(T x m)
Min.
Length
R (m)
Pedestal
Dia. OD
(mm)
Pedestal
Height
H (mm)
Est. Power
P(kW)
LBCRN2600-50Tx35m 50T x 35m 8m 4020mm 5000mm 400kW
LBCRN2600-40Tx47m 40T x 47m 10m 4020mm 5000mm 300kW
LBCRN2600-30Tx64m 30T x 64m 12m 4020mm 5000mm 250kW
LBCRN2600-25Tx71m 25T x 71m 14m 4020mm 5000mm 250kW
Note: Capacity not indicated below table shall be provided on request.
Swivel Fairlead
Design Features
a. Designed for MBL of wire with 90degree wrap on sheave and +/- 90degree rotation of
swivel head
b. Hardened rope grooves for longer operating life
c. Special design sheaves for high performance synthetic ropes
d. Class Certification can be arranged for Circle “P” or Posmoor
Model No SWL @
90 Degree Warp Wire Rope Size
Main Dimension
(L x W x H)
JJ-SFL-32 65Ton 32mm 760mm x 470mm x 640mm
JJ-SFL-38 90Ton 38mm 1210mm x 950mm x 970mm
JJ-SEL-44 120Ton 44mm 1160mm x 730mm x 1160mm
JJ-SFL-52 170Ton 52mm 2180mm x 1060mm x 1510mm
JJ-SFL-63 250Ton 63mm 2630mm x 1500mm x 1870mm
Note: Larger SWR size / capacity will be offered upon request
Vertical Leading Sheave
Design Features
a. Designed for MBL of wire with up to 45 /90 degree wrap on sheave
b. Sealed grease lubricated tapered roller bearings
c. Hardened rope grooves for longer operating life
Optional Features
a. Load and length monitoring system
b. Special sheaves for high performance synthetic ropes
c. Class Certification can be arranged upon request to meet Circle “P” or Posmoor
requirements
Model No. SWL @
90 Degree Warp Wire Rope Size
Main Dimension
(W x L x H)
JJ-VLS-28 50Ton 28mm 620mm x 350mm x 650mm
JJ-VLS-32 65Ton 32mm 700mm x 400mm x 730mm
JJ-VLS-38 90Ton 38mm 810mm x 460mm x 840mm
JJ-VLS-44 120Ton 44mm 930mm x 520mm x 970mm
JJ-VLS-52 170Ton 52mm 1080mm x 620mm x 1130mm
JJ-VLS-63 250Ton 63mm 1300mm x 730mm x 1350mm
Note: Larger size / capacity will be offered upon request
Horizontal Leading Sheave
Design Features
a. Designed for MBL of wire at 45/90degree wrap on sheave
b. Sealed grease lubricated tapered roller bearings
c. Surface hardened rope grooves for longer life
Optional Features
a. Load and length monitoring system can be installed on sheave
b. Special designed sheaves for high performance synthetic ropes
c. Class Certification can be arranged upon request to meet Circle “P” or Posmoor
requirements
Model No. SWL @
90 Degree Warp Wire Rope Size
Main Dimension
(D x H)
JJ-HLS-28 50Ton 28mm 630mm x 280mm
JJ-HLS-32 65Ton 32mm 730mm x 300mm
JJ-HLS-38 90Ton 38mm 860mm x 330mm
JJ-HLS-44 120Ton 44mm 990mm x 350mm
JJ-HLS-52 170Ton 52mm 1170mm x 320mm
JJ-HLS-63 250Ton 63mm 1430mm x 470mm
Note: Larger size / capacity will be offered upon request
A-Frame
Design features
b. Design for easy installation and removal onboard
c. Suitable for launching and recovery object during subsea operations
d. Active Heave Compensating (AHC) & Passive Heave Compensating features on hoisting
winch
e. Custom build to size and requirement
f. Design approval & fabrication survey by third party Classification Society
Model
No.
SWL
(T)
Max
Outboard
Distance
(mm)
Max Inboard
Distance
(mm)
Span at Base
(leg CC to CC)
(mm)
Height to Top
of the Beam
(mm)
Est.
Power
(kw)
JJ-AF20 20 4000mm 3650mm 7760mm 9000mm 60kw
JJ-AF50 50 4250mm 3700mm 9000mm 10000mm 75kw
JJ-AF100 100 5000mm 5000mm 10000mm 12000mm 150kw
JJ-AF200 200 6000mm 6000mm 12000mm 13000mm 300kw
JJ-AF250 250 6000mm 6000mm 12000mm 13000mm 400kw
Hydraulic Shark Jaw
Standard Features
Raised and lowered using heavy duty marine grade hydraulic cylinders
Local control pendant and remote control operations
Flush with deck when not in operation
When jaws are raised, there is no load on the hydraulic cylinders
Emergency release function – approved by Independent Classification Societies
Optional Features
Replaceable jaw inserts for different chain sizes
Full Classification or Third Party witness load test certification
Model No. Max Chain
Size
Max wire
Size
Main Dimension Weight
A B C D
200Ton 3.5” 3.5” 73” 40” 37” 16” 5400 LBS
350Ton 4.5” 4.75” 88” 50” 47” 19” 9000 LBS
500Ton 5.75” 6” 112” 60” 59” 24.5” 16000 LBS
750Ton 7.5” 7” 140” 75” 74” 30.5” 28500 LBS
Hydrauilc Towing Pin
Standard Features
Raised and lowered using heavy duty marine grade hydraulic cylinders
Angular close tip or parallel inline type pins configuration
Local control pendant and remote control operations
Flush with deck when not in operation
Emergency release system approved by Independent Classification Societies
Optional Features
Full Classification or Third Party witness load test certification
Can be custom design and build to customer required specification
Model No. SWL
Pin Capture
Working Height
(P)
Main Dimension
L W H
SB-TPA-100T 100Ton 415mm 2.2m 0.5m 1.2m
SB-TPA-200T 200Ton 610mm 2.7m 0.62m 1.5m
SB-TPA-350T 350Ton 724mm 3.5m 0.82m 1.9m
SB-TPA-500T 500Ton 724mm 140 3.63m 1.9m
Telescopic Gangway
Design Features
Standard supply with fully extended boom of 36M; 40M and 46M
a. Design for installation onto accomodation barge, offshore platform & floatation units
b. Open platform control console or air-conditioned cabin type control room
c. Constant tension and Active Heave Compensating (AHC) features
d. Build in electro-hydraulic power pack
e. Design to meet International Classification Societies approval and to API2C
Note: Crane can be custom design and build to customer required specification
Stern Roller
Design Feature
Bearing can be of bronze bushing, roller bearing or synthetic type bearing
Cooling can be of greasing or automatic water cooled type
Stern roller can be of single drum or twin drum type
SWL up to 1,000Ton can be design to suit customer requirement
Model No. Resultant Force F Main Dimension
Ø x L
JJ-SR-1600-4000 200 Ton 1600mm x 4000mm
JJ-SR-1700-4500 250 Ton 1700mm x 4500mm
JJ-SR-2000-5000 350 Ton 2000mm x 5000mm
Note: The size of stern roller can be designed suit to customer requirement.
Wire Rope Spooler
Design features
a. The wire rope spooler is design to suit a specific reel capacity, ranging from 10Ton to
600Ton, and is suitable for onshore and offshore usage
b. The wire rope spooler unit shall be a standalone unit, driven by a separate
containerised electro-hydraulic power pack or diesel driven engine
c. The containerised electro-hydraulic power pack or diesel driven engine are design and
build for offshore lifting
d. A local control panel is build into the container. An optional remote control station
with up to 25m of cable can also be offer upon request.
Note:
a. Technical specification and General Arrangement drawings shall be provided on request
b. Custom designs are available to meet customer specific operational requirement