PRODUCT CATALOGUE
Tractors / self-propelled machines PageTerminals with ME apps
APP & GO® 3
SMART430 4
BASIC-Terminal 4
COMFORT-Terminal 4
TOUCH800® 4
TOUCH1200® 4
TRACK-Guide II and TRACK-Guide III 10
Steering systems & GPS 14
TRACK-Leader AUTO® Pro 14
TRACK-Leader AUTO® Iso 15
TRACK-Leader AUTO® eSteer 16
GPS / RTK 17
On-board display/controller 20
HEKTARMETER 20
ACTIMAT 20
TRAIL-Control II 21
UNIMAT II 22
Plant protectionControl and monitoring systems
ISOBUS SPRAYER-Controller MAXI 3.0 24
ISOBUS SPRAYER-Controller MIDI 26
SPRAYDOS short 30
SPRAYDOS long 34
SPRAYLIGHT 38
SPRAYMAT II 42
TANK-Control 44
TANK-Control II 45
ISOBUS TRAIL-Control 46
ISOBUS DISTANCE-Control 48
ISOBUS DISTANCE-Control II 49
SECTION-Control TOP 50
SECTION-Control BOX 52
Seeders and PlantersISOBUS DRILL-Controller 54
DRILL-Control 56
DRILLMAT III 57
ISOBUS PLANTER-Controller 58
PRECIMAT 60
FertilizationISOBUS SPREADER-Controller 62
ISOBUS SLURRY-Controller 64
SPRAYMAT II for slurry tankers 66
ISOBUS UNI SPREADER-Controller 68
UNI SPREAD-Control 69
Spare parts 70
ContentGuidance systems ISOBUS terminals
SMART430 TOUCH800® TOUCH1200®
—
—
— — — —
—
—
—
—
*4
—
ME ODI® *4
— — — —
* 1 ISOBUS-UT is required for this app
* 2 TRACK-Leader is required for this app
* 3 Prerequisite for this app is: - when working with ISOBUS: ISOBUS-UT and ISOBUS-TC - when working with .shape fi les, TRACK-Leader and VRC
* 4 ISOBUS-TC is required for this app
= default app . = optional app . – = not possible
3
Guidance systems ISOBUS terminals
SMART430 TOUCH800® TOUCH1200®
—
—
— — — —
—
—
—
—
*4
—
ME ODI® *4
— — — —
Unbeatable advantages of APP & GO® include fl exibility and guaranteed future. In the fi rst step, each user selects a terminal that corresponds to their requirements, for example, the TRACK-Guide II for parallel guidance. Other apps can be activated as required. The overview shows the standard apps that are found on the different terminals.
APP & GO® – TerminalsTractors / self-propelled machines . Terminals with ME apps
3
ISOBUS terminalTractors / self-propelled machines . Terminals with ME apps
SMART430SMART
BASIC-Terminal COMFORT-TerminalCOMFORT-Terminal
TOUCH800® TOUCH1200®
4
**Please note prerequisites, see Page 3
*...designed for the retrofit market
ISOBUS terminals Item no.
SMART430 30322505
BASIC-Terminal 30322511
BASIC-Terminal with camera ports 30322512
COMFORT-Terminal 30322528
COMFORT-Terminal with camera ports 30322527
TOUCH800® with camera port 30322538
TOUCH1200® with camera port 30322537
APPs** Item no.
ISOBUS-UT 30302435
ISOBUS-TC 30302436
TRACK-Leader 30302432
SECTION-Control 30302450
VARIABLE RATE-Control (VRC) 30302512
TRACK-Leader AUTO® 30302514*
FIELD-Nav without FIELD-Nav Desktop DVD 30302437*
ASD 30302431*
ME ODI®303248966
FIELD-Nav Desktop DVD for FIELD-Nav Item no.
FIELD-Nav Desktop DVD Germany (D) 31302735*
FIELD-Nav Desktop DVD Austria (A) 3130273501*
FIELD-Nav Desktop DVD Switzerland (CH) 3130273502*
5
12 V
ISOBUS terminal accessoriesTractors / self-propelled machines . Terminals with ME apps
6
1
5 6
12
2
9
87
13
3
10.11
4
5
8
2
10
14.15
*...designed for the retrofi t market
Camera Item no.
10 Analogue HQ 2 camera with 11 m cable for non-touch terminals 3030249101*
11 Analogue HQ 2 camera with 11 m cable for touch terminals 3030249401*
12 Analogue NQ camera with 11 m cable for touch terminals 3030249400*
13 Extension cable for HQ and NQ camera, 5 m 31303060*
14 Extension cable for HQ 2 camera, 5 m 3130306001*
GPS Item no.
15DGPS receiver A101 with 6 m cablePath-to-path accuracy ± 25 cm 3030246900
16DGPS receiver A101 with 12 m cablePath-to-path accuracy ± 25 cm 3030246901
17DGPS / Glonass receiver AG-STAR with 6 m cablePath-to-path accuracy ± 20 cm 3030247600
18DGPS / Glonass receiver SMART-6LPath-to-path accuracy ± 15 cm 3030247606
Tractor basic vehicle harness Item no.
1 ISOBUS basic vehicle harness for tractors with ISOBUS in-cab connector 30322541
2 ISOBUS basic vehicle harness with rear socket 2.9 m cable, 50 A 30322554
3 Connector cable for ME terminal to John Deere 7020/7030/8030 30322543
4 ISOBUS basic vehicle harness with front and rear socket, cable length for front socket 6 m, rear socket 2.9 m 30322558
5Adapter cable for ME terminal to the signal socket in accordance with DIN 9684.1 / ISO 11786 for using the tractor ECU for non-touch terminals starting at HW 3.0.0 30322548
6Adapter cable for ME terminal with the ASD app for using a third-party terminal e.g. Rauch, Quantron E, E2 for non-touch terminals starting at HW 3.0.0 3032254800
7 Mounting bracket VESA75 for touch terminals on round pipe systems with a diameter of 20, 25 or 30 mm 31322508
8 Pivoting bracket VESA75 for touch terminals 31322507
Accessories for 30322554 Item no.
9 Front socket, cable length 6 m with conversion kit for rear socket 30322559
7
1814 1715.16
12 V
ISOBUS terminal accessoriesTractors / self-propelled machines . Terminals with ME apps
8
1 2 43
1
5
63 . 4
S-BOX Item no.
3
S-Box, 5 sections, with 9-pin Sub-D connector 30322600
S-Box, 6 sections, with 9-pin Sub-D connector 30322602
S-Box, 7 sections, with 9-pin Sub-D connector 30322604
S-Box, 8 sections with 9-pin Sub-D connector 30322606
S-Box, 9 sections with 9-pin Sub-D connector 30322608
S-Box, 10 sections, with 9-pin Sub-D connector 30322610
S-Box, 11 sections, with 9-pin Sub-D connector 30322612
S-Box, 12 sections, with 9-pin Sub-D socket 30322614
S-Box, 13 sections, with 9-pin Sub-D connector 30322616
S-Box, 18 sections, with 9-pin Sub-D connector 30322618
4
S-Box, 5 sections with CPC connector 30322630
S-Box, 6 sections with CPC connector 30322632
S-Box, 7 sections with CPC connector 30322634
S-Box, 8 sections with CPC connector 30322636
S-Box, 9 sections with CPC connector 30322638
S-Box, 10 sections with CPC connector 30322640
S-Box, 11 sections with CPC connector 30322642
S-Box, 12 sections with CPC connector 30322644
S-Box, 13 sections with CPC connector 30322646
Joystick ISOBUS terminal Item no.
1Joystick III for connection to ME terminal with 9-pin Sub-D connector, sealed buttons, Aux 1/Aux 2 3032258305
Joystick III for tractors with an ISOBUS in-cab connector with 9-pin CPC connector, sealed buttons, Aux 1/Aux 2 3032258606
Accessory Joystick-III ISOBUS for 3032258606 Item no.
2 Adapter cable in-cab connector with 9-pin CPC connector for tractors with ISOBUS (Bsp. CASE, NEW HOLLAND) 30322547
Lightbar Item no.
5 Lightbar external display for indicating the direction 30302490
Printer Item no.
6 ISOBUS task printer 30302695
Weather Station Item no.
7 ISOBUS Weather Station with 9-pin Sub-D connector 3030247105
8 ISOBUS Weather Station with 9-pin CPC connector 3030247104
9
5 6 7.8
TRACK-Guide II and IIITractors / self-propelled machines . Terminals with ME apps
10
1 . 7 1 . 8 2
6
1 . 8
5
3
4
1 . 7 1 .8
54
3
2
TRACK-Guide II
1 TRACK-Guide II / TRACK-Guide III
2 DGPS receiver A101
3 Mounting bracket with bracket
4 Power cable
5 Connector cable for A101 to ME terminal, 6 m
6 USB memory device
TRACK-Guide III Item no.
8
TRACK-Guide III with DGPS receiver A101, camera ports and basic vehicle harness 3030271412*
TRACK-Guide III with DGPS / Glonass receiver AG-STAR, camera port and basic vehicle harness 3030271413*
TRACK-Guide III with DGPS / Glonass receiver SMART-6L, camera port and basic vehicle harness 3030271414*
TRACK-Guide III with DGPS / Glonass receiver SMART-6L for RTK GSM, modem, antenna, camera port and basic vehicle harness 3030271415*
TRACK-Guide III with DGPS / Glonass receiver SMART-6L for RTK RADIO VHF, modem, antenna, camera port and basic vehicle harness 3030271416*
TRACK-Guide III with DGPS / Glonass receiver SMART-6L for RTK RADIO UHF, modem, antenna, camera port and basic vehicle harness 3030271417*
TRACK-Guide II more versions Item no.
7
TRACK-Guide II with DGPS receiver A101 3030271000*
TRACK-Guide II with DGPS receiver A101, camera ports 3030271100*
TRACK-Guide II with DGPS / Glonass receiver AG-STAR 3030271300*
TRACK-Guide II with DGPS / Glonass receiver AG-STAR, camera ports 3030271401*
**Please note prerequisites, see Page 3
FIELD-Nav Desktop DVD for FIELD-Nav Item no.
FIELD-Nav Desktop DVD Germany (D) 31302735*
FIELD-Nav Desktop DVD Austria (A) 3130273501*
FIELD-Nav Desktop DVD Switzerland (CH) 3130273502*
*...designed for the retrofit market
APPs** Item no.
ISOBUS-UT 30302435
ISOBUS-TC 30302436
TRACK-Leader 30302432
SECTION-Control 30302450
VARIABLE RATE-Control (VRC) 30302512
TRACK-Leader AUTO® 30302514*
FIELD-Nav without FIELD-Nav Desktop DVD 30302437*
ASD 30302431*
ME ODI®303248966
11
TRACK-Guide II and IIITractors / self-propelled machines . Terminals with ME apps
12
1
6 8
12
22 3
9
13 14
4
10
15
5 7
11
16
22.23
1
Accessories Item no.
1DGPS receiver A101 Path-to-path accuracy ± 20 - 30 cm for use by TRACK-Leader 3030246900
2DGPS / Glonass receiver AG-STAR Path-to-path accuracy ± 20 - 30 cm for use by TRACK-Leader 3030247600
3DGPS / Glonass receiver SMART-6L Path-to-path accuracy ± 10 - 15 cm for use by TRACK-Leader 3030247606
4Tractor basic vehicle harness for second tractor with mounting bracket, power supply and mounting accessories for A100/A101 30302750
5Tractor basic vehicle harness for second tractor with mounting bracket, power supply and mounting accessories for AG-STAR/SMART-6L 30302751
6 Tilt module GPS to compensate for side incline on hilly terrain 30302495*
7 Mounting bracket VESA75 for touch terminals on round pipe systems with a diameter of 20, 25 or 30 mm 31322508
8 Pivoting bracket VESA75 for touch terminals 31322507
9 Suction bracket with mounting bracket for mounting TRACK-Guide to the wind shield 31302471
10Mounting accessories for A100/A101 for second tractor self-adhesive metal plate – counterpart to the magnetic pedestal 31302465
11Mounting accessories for AG-STAR/SMART-6L for second tractor self-adhesive metal plate – counterpart to the magnetic pedestal 3130247601
12Connector cable A100/A101 to ME terminal, 6 m 31302462
Connector cable A100/A101 to ME terminal, 12 m 31302468
13Connector cable AG-STAR/SMART-6L to ME terminal, 6 m 31302476
Connector cable AG-STAR/SMART-6L to ME terminal, 12 m 3130247607
14 Connector cable A100/A101 with speed output for the terminal 31302457
15 Connector cable AG-STAR with speed output for the terminal 31302454
16 Y cable for A100/A101 to connect to 2 displays 31302459
17 Connector cable A320 to ME terminal with external power supply, 6 m 31302477
18 Connector cable with 3-pin socket, to TRACK-Guide II 31302499
19 Sensor Y, working position, 5 m cable with 3-pin connector 312089
20Adapter cable for ME terminal to the signal socket in accordance with DIN 9684.1 / ISO 11786 for using the tractor ECU for non-touch terminals starting at HW 3.0.0 30322548
21Adapter cable for ME terminal with the ASD app for using a third-party terminale.g. Rauch, Quantron E, E2 for non-touch terminals starting at HW 3.0.0 3032254800*
22 Analogue HQ camera with 11 m cable for non-touch terminals 3030249101*
23 Analogue HQ camera with 11 m cable for touch terminals 3030249401*
24 Analogue NQ camera with 11 m cable for touch terminals 3030249400*
25 Camera extension cable, 5 m 31303060*
Retrofi t camera port for non-touch terminals 30322532
*...designed for the retrofi t market 13
17
22.23
18
24
19
25
20 21
Hydraulic
Battery
Automatic steering – TRACK-Leader AUTO® Pro Item no.
1 Steering job computer 3030264265*
RTK activation for steering job computer (optional) 3030264266*
Implement-specifi c hydraulic kit
*
2 Steering valve and wheel angle sensor cable harness
3 Steering valve
4 Wheel angle sensor
5 Bracket for steering valve and steering job computer
6 GPS / Terminal cable harness 3030264264*
7 Foot switch 3030264267*
You can fi nd more information on the availability and prices on our website in the Confi gurator.
Tractors / self-propelled machines . Steering systems & GPS
Automatic steeringTractors / self-propelled machines . Steering systems & GPS
14
4 3.5
1.572
6
1
5
2
6
3
7
4
*...designed for the retrofi t market
Battery
CAN / ISO
Automatic steering – TRACK-Leader AUTO® ISO Item no.
1 Steering job computer 3030264265*
RTK activation for steering job computer (optional) 3030264266*
Specifi c kit for pre-equipped implements
*
2 Cable harness on vehicle CAN-BUS connection
3 Steering job computer bracket
4 GPS / Terminal cable harness 3030264264*
5 Activation key connector cable 3130264329*
6 Foot switch 3030264267*
You can fi nd more information on the availability and prices on our website in the Confi gurator.
1
65
2 3 4
1.3
2
654
15
Battery
7
7
You can fi nd more information on the availability and prices on our website in the Confi gurator.
Automatic steering – TRACK-Leader AUTO® eSteer Item no.
TRACK-Leader AUTO® eSteer KIT
3030264281*
1 Steering job computer
2 Steering wheel motor
RTK activation for steering job computer (optional) 3030264266*
3 Steering job computer universal bracket 3030264268*
4 GPS / Terminal cable harness 3030264264
5 Foot switch 3030264267*
6 Implement-specifi c bracket for MDU *
7 Wheel angle sensor (optional) to improve the steering performance on request
Tractor basic vehicle harness for second tractor Item no.
8 for second tractor 3130264290*
Additional required item 3, 4 and 6
Automatic steeringTractors / self-propelled machines . Steering systems & GPS
16 *...designed for the retrofi t market
1
5
2
6
3
4
4
5
3/6
1.2
GPS / RTK
Overview of the GPS receivers and their path-to-path accuracies
Costs of the correction signal
L1 receiver L1 / L2 receiver
A101 AG-STAR SMART-6L
EGNOS / WAAS free of charge 25 cm 20 cm 15 cm
GL1DE free of charge no 25 cm 15 -18 cm
Glonass free of charge no yes yes
TerraStar charge payable no no 4 cm
RTK charge payable no no 2 cm
The data specified here are reference values. Variations may occur.
Correction signalGPS receiver
GLIDE EGNOS RTK-GSM RTK-VHF RTK-UHF
SMART-6LEGNOS/GLIDE Item no.: 3030247606
+ +3030248931
+ 3030248920 + 3030248912
3030248931 + 3030248921 + 3030248910
3030248931 + 3030248922 + 3030248911
SMART-6LRTK-GSM Item no.: 3030248901
+ + + - -
SMART-6LRTK-VHF Item no.: 30302489
+ + - + -
SMART-6LRTK-UHF Item no.: 3030248900
+ + - - +
Remarks:GLIDE is an internal correction method for calculating your actual positionThe SMART-6L, EGNOS / GLIDE receiver can be upgraded to RTK, the required item numbers can be found in the table
RTK-GSM
The RTK receivers are compatible with AxioNET, SmartNet, RTK Clue, AgCel-Net and all NTRIP networks
RTK radio base station
Transmission power Range Approval
SMART-6L VHF Up to 5 Watt Approx. 15 km Country-specific
SMART-6L UHF Up to 25 Watt Approx. 50 km Country-specific
17
8
GPS receiver for steering system Item no.
1DGPS receiver A101 Path-to-path accuracy ± 25 cm 3030246900
2DGPS / Glonass receiver AG-STAR Path-to-path accuracy ± 20 cm 3030247600
3DGPS / Glonass receiver SMART-6L Path-to-path accuracy ± 15 cm 3030247606
TerraStar L-BAND activation for SMART-6LAbsolute accuracy ± 4 cm 3030248930*
RTK activation for SMART-6LAbsolute accuracy ± 2 cm 3030248931*
4 GSM / GPRS modem for SMART-6L for e.g. AXIO-NET FarmRTK 3030248920*
5 GSM/GPRS antenna with magnetic pedestal and self-adhesive metal plate 3030248912*
6 VHF radio modem 135-174 Mhz for SMART-6L, without radio antenna 3030248921*
7 VHF radio antenna with magnetic pedestal and self-adhesive metal plate 3030248910*
8 UHF radio modem 403-473 Mhz for SMART-6L, without radio antenna 3030248922*
9 UHF radio antenna with magnetic pedestal and self-adhesive metal plate 3030248911*
10DGPS / Glonass receiver SMART-6L with RTK activation and GSM/GPRS modem for e.g. AXIO-NET FarmRTK, absolute accuracy ± 2 cm 3030248901*
11DGPS / Glonass receiver SMART-6Lwith RTK activation and VHF radio modem 135-174 Mhz, absolute accuracy ± 2 cm 30302489*
12DGPS / Glonass receiver SMART-6L with RTK activation and UHF radio modem 403-473 Mhz, absolute accuracy ± 2 cm 3030248900*
RTK radio base station Item no.
SMART-6L VHF transmission power up to 5 Watt, range approx. 15 km 3030248150*
SMART-6L UHF transmission power up to 35 Watt, range approx. 50 km 3030248151*
GPS / RTKTractors / self-propelled machines . Steering systems & GPS
18
1
5 . 7 . 9 10 . 11 . 12
2 3 4 . 6 . 8
*...designed for the retrofi t market
TerraStar license fees Item no.
TerraStar licence fee (Europe, Eastern Europe, Russia), 1 year subscription 3030248932
TerraStar licence fee (Europe, Eastern Europe, Russia), 6 year subscription 3030248953
TerraStar licence fee (Europe, Eastern Europe, Russia), 3 year subscription 3030248952
TerraStar licence fee (Europe, Eastern Europe, Russia), 1 year subscription 3030248951
TerraStar licence fee (North and South America), 1 year subscription 3030248933
TerraStar licence fee (North and South America), 6 year subscription 3030248956
TerraStar licence fee (North and South America), 3 year subscription 3030248955
TerraStar licence fee (North and South America), 1 year subscription 3030248954
TerraStar licence fee (all other countries), 1 year subscription 3030248934
TerraStar licence fee (all other countries), 6 month subscription 3030248959
TerraStar licence fee (all other countries), 3 month subscription 3030248958
TerraStar licence fee (all other countries), 1 month subscription 3030248957
19
12V
HEKTARMETER . ACTIMAT . TRAIL-Control II
HEKTARMETER Item no.
1 HEKTARMETER
302705
2 Sensor X, wheel, 10 m cable
3 Sensor Y, working position, 9 m cable
4 Power supply
Accessories Item no.
5 Battery cable, 2 x 1.5 qmm with 1-pin socket 312159
ACTIMAT Item no.
6 ACTIMAT 30271010
Tractors / self-propelled machines . On-board computer
20
1 5 6
1
4
36
2
5
4
8
61
3
2
7
5
One connector cable is required for each sensor 30303690 and 31302506
1
5
2
6
3
7
4
8
Optional Item no.
7 Electronic slope sensor with 1 m cable and AMP connector 30303690
8 Proportional valve 302922
Connector cables Item no.
Connector cable, 2 m, for sensors, with 3-pin AMP socket to junction box 30303294
Connector cable, 4 m, for sensors, with 3-pin AMP socket to junction box 30303296
Connector cable, 6 m, for sensors, with 3-pin AMP socket to junction box 30303295
Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
TRAIL-Control II Item no.
1 TRAIL-Control II on-board integrated display/controller with bracket 30293001
2 Junction box 30293010
3 Gyroscope with bracket and extension cable 30293020
4 Potentiometer, 12V, 6 m cable with rod and bracket 30291405
5 Sensor X, trailed sprayer, 12 magnets, 6 m cable without connector 312583
6 Sensor Y, 1 m cablewith AMP connector without installation material 31302506
21
12V
UNIMAT IITractors / self-propelled machines . On-board computer
22
1
5
9
13
2
6
10
14
3
7
11
15
4
8
12
1
UNIMAT II Item no.
1 UNIMAT II computer with bracket 30272210
Basic vehicle harness for tractors / combine harvestersAny one of these basic vehicle harnesses is necessary for equipping a second tractor / combine harvester.
Item no.
2
Tractor basic vehicle harness for a tractor without signal socket. Scope of delivery: - Mounting bracket for computer - Sensor X, wheel / drive shaft, 6 m cable - Battery connector cable, 5 m - Installation equipment 302724
3Tractor-to-tractor basic vehicle harness with signal socket in accordance with DIN 9684.1 and ISO 11786 (7-pin), KHD, UNIMOG (Unicomp), FENDT, John Deere, Case-Steyr 302729
4
Trailed sprayer basic vehicle harness Scope of delivery: - Mounting bracket for computer - Sensor X, trailed sprayer, 10 m cable, 6 magnets- Battery connector cable, 5 m- Installation equipment 302733
5
Basic vehicle harness - combine harvester Scope of delivery: - Mounting bracket for computer - Sensor X, 2 sensors for forwards / reverse detection, 10 m cable- Battery connector cable, 5 m 302735
Adaptor cable for basic vehicle harness 302724 Item no.
6 Adaptor for FENDT signal socket (4-pin) with 3-pin connector 312123
7 Adaptor for MB-Trac, with electronic km/h display and 3-pin connector 312125
8 Speedometer adaptor UNIMOG, 5 m cable, with 3-pin connector 312087
Accessories Item no.
14
Adaptor cable for retrofitting RPM sensors and/or tally counter Scope of delivery: - Cable with 3-pin socket - Wiring diagram 312746
15 Sensor D, RPM, 12 m cable with connector 312097
Additional sensor technology to the basic equipment Item no.
9UNIMAT II equipment as hectare counter without RPM monitorScope of delivery: - Sensor Y working position, 5 m cable 302742
10
UNIMAT II equipment as hectare counter for tractor with PTO RPM monitor Scope of delivery: - Sensor Y, working position, 5 m cable - Sensor A, RPM PTO, 6 m cable 302743
11
UNIMAT II equipment as hectare counter for combine harvester with 1 RPM monitor Scope of delivery: - Sensor Y, working position, 5 m cable - Sensor A, RPM, 12 m cable 302748
12
UNIMAT II equipment as hectare counter with 2 RPM monitors Scope of delivery: - Sensor Y, working position, 5 m cable - Sensor A, RPM or tally counter, 12 m cable - Sensor B, RPM, 8 m cable 302744
13
UNIMAT II equipment as hectare counter with 2 RPM monitors and separate tally counter Scope of delivery: - Sensor Y, working position, 5 m cable - Sensor A, RPM, 12 m cable - Sensor B, RPM, 8 m cable - Sensor Z, tally counter, 10 m cable 302746
23
Hyd.
CA
B
ISOBUS SPRAYER-Controller MAXI 3.0Plant protection . Control and monitoring systems
24
1
2
3
4
6 . 78
5
12
11
14 . 15 14 . 15
1
5
10
14 . 15
2
6 7
11
3
8
12
4
9 . 13
ISOBUS job computer for field sprayers Item no.
1 ISOBUS job computer MAXI 3.0 for field sprayer 30303187
2
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
3 Junction box A field sprayer , regulation and sensors, 5 m cable 3030216
4 Junction box B field sprayer, hydraulics, 6 m cable 30303231
5 Junction box C field sprayer, sections with motorized valves, 6 m cable 30303266
Flow meter Item no.
6Inline flow meter (Bürkert) DN 20, 10 bar, 7 m cable without connector, 8 - 140 l/min 30244510
Inline flow meter (Bürkert) DN 25, 10 bar, 7 m cable without connector, 14 - 220 l/min 30244710
7 Polmac 1" Turbo-Flow flow meter 30 bar, 7 m cable without connector, 6 - 140 l/min 30244910
Pressure sensor Item no.
8 Pressure sensor 0 – 16 bar, 1 m cable with AMP connector 30303591
9 Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
10 Pressure sensor accessories 31243210
Speed sensor Item no.
11 Sensor X, trailed sprayer, 6 m cable without connector, 12 magnets 312583
Accessories Item no.
12 Anemometer for sprayers, 3 m cable with 3-pin AMP connector 30303705
13
Connector cable, 2 m, for sensors, with 3-pin AMP socket to junction box 30303294
Connector cable, 4 m, for sensors, with 3-pin AMP socket to junction box 30303296
Connector cable, 6 m, for sensors, with 3-pin AMP socket to junction box 30303295
Manifold - motorized - Flow up to 160 l/min Item no.
14
Manifold, motorized, 3 sections 30303400
Manifold, motorized, 4 sections 30303405
Manifold, motorized, 5 sections 30303410
Manifold, motorized, 7 sections 30303420
Manifold, motorized, 8 sections 30303425
Manifold, motorized, 9 sections 30303430
Manifold - motorized - Flow up to 250 l/min
15
Manifold, motorized, 4 sections 30303406
Manifold, motorized, 6 sections 30303416
Manifold, motorized, 7 sections 30303421
Manifold, motorized, 8 sections 30303426
Manifold, motorized, 9 sections 30303431
25
ISOBUS SPRAYER-Controller MIDIPlant protection . Control and monitoring systems
26
5 . 68
37
12
11 . 12 11 . 12
1
5 6
10
2
7
3
8
4
9 11 . 12
ISOBUS job computer for field sprayers Item no.
1 ISOBUS main job computer MIDI for field sprayers (F1) 30322322
2
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
3 Cable harness, manifold 30322380
Flow meter Item no.
5Inline flow meter (Bürkert) DN 20, 10 bar, 7 m cable without connector, 8 - 140 l/min 30244510
Inline flow meter (Bürkert) DN 25, 10 bar, 7 m cable without connector, 14 - 220 l/min 30244710
6 Polmac 1" Turbo-Flow flow meter 30 bar, 7 m cable without connector, 6 - 140 l/min 30244910
Pressure sensor Item no.
8 Pressure sensor 0 – 16 bar, 1 m cable with AMP connector 30303591
9 Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
10 Pressure sensor accessories bag 31243210
Optional instead of the cable harnesses Item no.
4Junction box for sprayer main job computer MIDI (F1) with DISTANCE-Control, 9 m cable 30322360
Junction box for sprayer main job computer MIDI (F1) with DISTANCE-Control, 4 m cable 30322362
Manifold - motorized - Flow up to 160 l/min Item no.
11
Manifold, motorized, 3 sections 30303400
Manifold, motorized, 4 sections 30303405
Manifold, motorized, 5 sections 30303410
Manifold, motorized, 7 sections 30303420
Manifold, motorized, 8 sections 30303425
Manifold, motorized, 9 sections 30303430
Manifold - motorized - Flow up to 250 l/min
12
Manifold, motorized, 4 sections 30303406
Manifold, motorized, 6 sections 30303416
Manifold, motorized, 7 sections 30303421
Manifold, motorized, 8 sections 30303426
Manifold, motorized, 9 sections 30303431
Accessories Item no.
7 Sensor X (speed), trailed sprayer, 1 m cablewith AMP connector and 12 magnets 30303621
27
Hyd.
ISOBUS SPRAYER-Controller MIDIPlant protection . Control and monitoring systems
28
14
5
11
8
7
9 . 10
2
3
1 . 2
9 10
6
11
3
7
12
4 . 5
8
13
ISOBUS job computer with add-on job computer for field sprayers Item no.
1 ISOBUS job computer MIDI for field sprayers (F1) 30322322
2 ISOBUS expansion job computer MIDI for field sprayers (F2) 30322327
3
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
4 Cable harness, manifold 30322380
5 Cable harness, hydraulics 30322385
Flow meter Item no.
9Inline flow meter (Bürkert) DN 20, 10 bar, 7 m cable without connector, 8 - 140 l/min 30244510
Inline flow meter (Bürkert) DN 25, 10 bar, 7 m cable without connector, 14 - 220 l/min 30244710
10 Polmac 1" Turbo-Flow flow meter 30 bar, 7 m cable without connector, 6 - 140 l/min 30244910
Pressure sensor Item no.
11 Pressure sensor 0 – 16 bar, 1 m cable with AMP connector 30303591
12 Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
13 Pressure sensor accessories bag 31243210
Accessories Item no.
7
Connector cable, main to add-on job computer, 0.3 m 30322355
Connector cable, main to add-on job computer, 1.5 m 30322359
Connector cable, main to add-on job computer, 3.2 m 30322358
Connector cable, main to add-on job computer, 6.5 m 30322357
Connector cable, main to add-on job computer, 10 m 30322356
8 Sensor X (speed), trailed sprayer, 1 m cable with AMP connector, 12 magnets 30303621
Optional instead of the cable harnesses Item no.
6
Junction box for sprayer main job computer MIDI (F1) with DISTANCE-Control, 9 m cable 30322360
Junction box for sprayer main job computer MIDI (F1) with DISTANCE-Control, 4 m cable 30322362
Junction box for add-on job computer MIDI (F2) with hydraulics and TRAIL-Control, 4 m cable 30322365
Junction box for add-on job computer MIDI (F2) with hydraulics and TRAIL-Control, 9 m cable 30322367
Motorized manifold for pumps up to 160 l/min and up to 250 I/min, see page 27
29
SPRAYDOS short
12V
Plant protection . Control and monitoring systems
30
1
5
9
2
6
3
7
4
8
9
1
Basic vehicle harnessAny one of these basic vehicle harnesses is necessary for equipping a second tractor
Item no.
2
Tractor basic vehicle harness for a tractor without signal socket. Scope of delivery: - Mounting bracket for computer - Sensor X, wheel / drive shaft, 6 m cable- Battery connector cable- Installation equipment 302724
3Tractor-to-tractor basic vehicle harness with signal socket in accordance with DIN 9684.1 and ISO 11786 (7-pin), KHD, UNIMOG (Unicomp), FENDT, John Deere, Case-Steyr 302729
4
Trailed sprayer basic vehicle harness Scope of delivery: - Mounting bracket for computer - Sensor X, trailed sprayer, 10 m cable without connector- Battery connector cable- Installation equipment 30273305
5
Basic equipment without sensor Scope of delivery: - Mounting bracket for computer - Battery connector cable 30273505
Adaptor cable for basic vehicle harness 302724 Item no.
6 Adaptor for signal socket FENDT (4-pin) with 3-pin connector 312123
7 Adaptor for MB-Trac, with electr. km/h display with 3-pin connector 312125
8 Speedometer adaptor UNIMOG, 5 m cable, with 3-pin connector 312087
Junction box Item no.
9Junction box for SPRAYDOS, 6.5 m cable with 39-pin male connector for manifold and hydraulics 30221070
Junction box for SPRAYDOS, 10 m cable with 39-pin male connector for manifold and hydraulics 30221075
SPRAYDOS short Item no.
1
SPRAYDOS computer, 5 sections, without hydraulics, with bracket 30221001
SPRAYDOS computer, 7 sections, without hydraulics, with bracket 30221011
SPRAYDOS computer, 9 sections, without hydraulics, with bracket 30221021
Additional functions Item no.
Motorized slope compensation with button max. 15 Ampere 30221030
Hydraulic slope compensation with button max. 4 Ampere 30221185
Hydraulic function with button max. 4 Ampere, max. 4 functions possible 30221180
31
12V
SPRAYDOS shortPlant protection . Control and monitoring systems
32
10 . 11 10 . 114 1
7
1
6
10 . 11
2
7
3
8
4
5
9
Accessories Item no.
6 Sensor X, wheel / drive shaft, 6 m cable with 3-pin connector 312083
7 Sensor X trailed sprayer (12 magnets) for slip-free speed tracking 312583
8 Radar sensor, 1 m cable with AMP connector 30258321
9 Extension cable, 11 m for radar sensor, with AMP socket and a 3-pin connector 30303290
Manifold - motorized - Flow up to 160 l/min Item no.
10
Manifold, motorized, 3 sections 30303400
Manifold, motorized, 4 sections 30303405
Manifold, motorized, 5 sections 30303410
Manifold, motorized, 7 sections 30303420
Manifold, motorized, 8 sections 30303425
Manifold, motorized, 9 sections 30303430
Manifold - motorized - Flow up to 250 l/min
11
Manifold, motorized, 4 sections 30303406
Manifold, motorized, 6 sections 30303416
Manifold, motorized, 7 sections 30303421
Manifold, motorized, 8 sections 30303426
Manifold, motorized, 9 sections 30303431
Pressure sensor Item no.
1 Pressure sensor 0-16 bar, 1 m cable, AMP connector 30303591
2 Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
3 Pressure sensor accessories bag 31243210
Flow meter Item no.
4Inline flow meter (Bürkert) DN 20, 10 bar, 7 m cable without connector, 8 - 140 l/min 30244510
Inline flow meter (Bürkert) DN 25, 10 bar, 7 m cable without connector, 14 – 220 I/min 30244710
5 Polmac 1" flow meter, Turbo-Flow 30 bar, 7 m cable without connector, 6 - 140 I/min 30244910
33
Hyd.
12V
SPRAYDOS longPlant protection . Control and monitoring systems
34
1
5
9
2
6
10
3
7
4
8
9
10
1
Basic vehicle harnessAny one of these basic vehicle harnesses is necessary for equipping a second tractor
Item no.
2
Tractor basic vehicle harness for a tractor without signal socket. Scope of delivery: - Mounting bracket for computer - Sensor X, wheel / drive shaft, 6 m cable- Battery connector cable- Installation equipment 302724
3Tractor-to-tractor basic vehicle harness with signal socket in accordance with DIN 9684.1 and ISO 11786 (7-pin), KHD, UNIMOG (Unicomp), FENDT, John Deere, Case-Steyr 302729
4
Trailed sprayer basic vehicle harness Scope of delivery: - Mounting bracket for computer - Sensor X, trailed sprayer, 10 m cablewithout connector- Battery connector cable- Installation equipment 30273305
5
Basic equipment without sensor Scope of delivery: - Mounting bracket for computer - Battery connector cable 30273505
Adaptor cable for basic vehicle harness 302724 Item no.
6 Adaptor for signal socket FENDT (4-pin) with 3-pin connector 312123
7 Adaptor for MB-Trac, with electr. km/h display with 3-pin connector 312125
8 Speedometer adaptor UNIMOG, 5 m cablewith 3-pin connector 312087
Junction box Item no.
9Junction box for SPRAYDOS, 6.5 m cable with 39-pin male connector for manifold and hydraulics 30221070
Junction box for SPRAYDOS, 10 m cable with 39-pin male connector for manifold and hydraulics 30221075
Junction box, hydraulics Item no.
10 Junction box, hydraulics, with 30-pin male connector, 6.5 m cable 30221080
SPRAYDOS long Item no.
1
SPRAYDOS long, 5 sections, with expandable hydraulic functions 30221151
SPRAYDOS long, 7 sections, with expandable hydraulic functions 30221161
SPRAYDOS long, 9 sections, with expandable hydraulic functions 30221171
Additional functions Item no.
Motorized slope compensation with button, max. 15 Ampere 30221030
Hydraulic slope compensation with button, max. 4 Ampere 30221185
Hydraulic function with button, max. 4 Ampere, max. 13 functions possible 30221180
All further hydraulic functions on request
35
Hyd.
12V
SPRAYDOS longPlant protection . Control and monitoring systems
36
10 . 11 10 . 114 . 5 1
7
1
6
10 . 11
2
7
3
8
4
5
9
Accessories Item no.
6 Sensor X wheel / drive shaft, with 3-pin connector, 6 m cable 312083
7 Sensor X trailed sprayer (12 magnets) for slip-free speed tracking 312583
8 Radar sensor, 1 m cable with AMP connector 30258321
9 Extension cable, 11 m for radar sensor, with AMP socket and a 3-pin connector 30303290
Manifold – motorized - Flow up to 160 l/min Item no.
10
Manifold, motorized, 3 sections 30303400
Manifold, motorized, 4 sections 30303405
Manifold, motorized, 5 sections 30303410
Manifold, motorized, 7 sections 30303420
Manifold, motorized, 8 sections 30303425
Manifold, motorized, 9 sections 30303430
Manifold – motorized - Flow up to 250 l/min
11
Manifold, motorized, 4 sections 30303406
Manifold, motorized, 6 sections 30303416
Manifold, motorized, 7 sections 30303421
Manifold, motorized, 8 sections 30303426
Manifold, motorized, 9 sections 30303431
Pressure sensor Item no.
1 Pressure sensor 0 – 16 bar, 1 m cable with AMP connector 30303591
2 Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
3 Pressure sensor accessories bag 31243210
Flow meter Item no.
4Inline flow meter (Bürkert) DN 20, 10 bar, 7 m cable without connector, 8 - 140 l/min 30244510
Inline flow meter (Bürkert DN 25, 10 bar, 7 m cable without connector, 14 – 220 I/min 30244710
5 Polmac 1" flow meter, Turbo-Flow 30 bar, 7 m cable without connector, 6 - 140 I/min 30244910
37
12V
SPRAYLIGHTPlant protection . Control and monitoring systems
38
1
5
9
2
6
3
7
4
8
9
1
Basic vehicle harnessAny one of these basic vehicle harnesses is necessary for equipping a second tractor
Item no.
2
Tractor basic vehicle harness for a tractor without signal socket Scope of delivery: - Mounting bracket for computer - Sensor X, wheel/drive shaft, 6 m cable- Battery connector cable- Installation equipment 302724
3Tractor-to-tractor basic vehicle harness with signal socket in accordance with DIN 9684.1 and ISO 11786 (7-pin), KHD, UNIMOG (Unicomp), FENDT, John Deere, Case-Steyr 302729
4
Trailed sprayer basic vehicle harness Scope of delivery: - Mounting bracket for computer - Sensor X, trailed sprayer, 10 m cable without connector- Battery connector cable- Installation equipment 30273305
5
Basic equipment without sensor Scope of delivery: - Mounting bracket for computer - Battery connector cable 30273505
Adaptor cable for basic vehicle harness 302724 Item no.
6 Adaptor for signal socket FENDT (4-pin) with 3-pin connector 312123
7 Adaptor for MB-Trac, with electronic km/h display with 3-pin connector 312125
8 Speedometer adaptor UNIMOG, 5 m cable, with 3-pin connector 312087
Junction box Item no.
9
Junction box for SPRAYLIGHT, 6.5 m cable for manifold and hydraulic system 30221071
Junction box for SPRAYLIGHT, 10 m cable for manifold and hydraulic system 30221076
Junction box for SPRAYLIGHT, 13 m cable for manifold and hydraulic system 30221078
SPRAYLIGHT Item no.
1 SPRAYLIGHT computer up to 7 sections and hydraulics, with bracket 30283305
39
12V
1
6
10 . 11
2
7
3
8
4
5
9
SPRAYLIGHTPlant protection . Control and monitoring systems
40
10 . 11 10 . 114 1
7
Accessories Item no.
6 Sensor X, wheel / drive shaft, 6 m cable with 3-pin connector 312083
7 Sensor X, trailed sprayer (12 magnets) for slip-free speed tracking 312583
8 Radar sensor, 1 m cable with AMP connector 30258321
9 Extension cable, 11m for radar sensor, with AMP socket and a 3-pin connector 30303290
Manifold – motorized - Flow up to 160 l/min Item no.
10
Manifold, motorized, 3 sections 30303400
Manifold, motorized, 4 sections 30303405
Manifold, motorized, 5 sections 30303410
Manifold, motorized, 7 sections 30303420
Manifold, motorized, 8 sections 30303425
Manifold, motorized, 9 sections 30303430
Manifold – motorized - Flow up to 250 l/min
11
Manifold, motorized, 4 sections 30303406
Manifold, motorized, 6 sections 30303416
Manifold, motorized, 7 sections 30303421
Manifold, motorized, 8 sections 30303426
Manifold, motorized, 9 sections 30303431
Pressure sensor Item no.
1 Analogue pressure sensor 0 - 16 bar, 1 m cable with AMP connector 30303593
2 Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
3 Pressure sensor accessories bag 31243210
Flow meter Item no.
4Inline flow meter (Bürkert) DN 20, 10 bar, 7 m cable without connector, 8 - 140 l/min 30244510
Inline flow meter (Bürkert) DN 25, 10 bar, 7 m cable without connector, 14 – 220 I/min 30244710
5 Polmac 1" flow meter, Turbo-Flow 30 bar, 7 m cable without connector, 6 - 140 I/min 30244910
41
12V
SPRAYMAT IIPlant protection . Control and monitoring systems
42
1
5
9
2
6
10
3
7
11
4
8
12
12 - 6
10 - 12
Basic vehicle harness for tractors / combine harvesters Any one of these basic vehicle harnesses is necessary for equipping a second tractor / combine harvester.
Item no.
2
Tractor basic vehicle harness for a tractor without signal socket Scope of delivery: - Mounting bracket for computer - Sensor X, wheel/drive shaft, 6 m cable- Battery connector cable- Installation equipment 302724
3Tractor-to-tractor basic vehicle harness with signal socket in accordance with DIN 9684.1 and ISO 11786 (7-pin), KHD, UNIMOG (Unicomp), FENDT, John Deere, Case-Steyr 302729
4
Trailed sprayer basic vehicle harness Scope of delivery: - Mounting bracket for computer - Sensor X, trailed sprayer 10 m (6 magnets)- Battery connector cable- Installation equipment 302733
5
Combine harvester basic vehicle harness Scope of delivery: - Mounting bracket for computer - Sensor X wheel, 2 sensors for forward / reverse detection, 10 m cable - Battery connector cable 302735
6
Basic equipment without sensor Scope of delivery: - Mounting bracket for computer - Battery connector cable 30273505
Adaptor cable for basic vehicle harness 302724 Item no.
7 Adaptor for signal socket FENDT (4-pin) with 3-pin connector 312123
8 Adaptor for MB-Trac, with electronic km/h display with 3-pin connector 312125
9 Speedometer adaptor UNIMOG, 5 m cable, with 3-pin connector 312087
Sprayer equipment Item no.
10
SPRAYMAT II equipment for sprayer with manual manifold Scope of delivery: - Polmac 1" flow meter, Turbo-Flow 30 bar, 6 - 140 l/min - Sensor Y, operating position 302736
11
SPRAYMAT II equipment for sprayer with switch box to TECNOMA-ELEKTRA and regular manifold without return flow measurement Scope of delivery: - Flow meter, Polmac 1" - Connector including switch for switch box 302740
12
SPRAYMAT II equipment for sprayer for third-party switch box* Scope of delivery: - Polmac 1" flow meter Turbo-Flow 30 bar 6 - 140 l/min - Switch box connector 302777
* Switch box must be sent to the manufacturer for any adjustments. Any adaptor parts potentially required for installation within the fitting should be sourced from the respective sprayer manufacturer.
Orchard sprayer equipment Item no.
SPRAYMAT II equipment for orchard sprayer with manual manifold Scope of delivery: - Honsberg flow meter, DN25, 50 bar 1- 80 l/ min - Sensor Y, operating position 30273605
SPRAYMAT II equipment for orchard sprayer with electronic manifold Scope of delivery: - Honsberg flow meter, DN25, 50 bar 1- 80 l/ min- Switch box connector: Switch box must be sent to the manufacturer for any adjustments. 30273620
SPRAYMAT II Item no.
1 Spraymat II – computer with bracket 30272010
43
Plant protection . Control and monitoring systems
TANK Control The fi rst number in the article text is the maximum measurement value, while the second number is the overall length of the sensor.
Item no.
1
TANK-Control with level sensor 1200/1380 30252003
TANK-Control with level sensor 1440/1620 30252006
TANK-Control with level sensor 1600/1780 30252011
TANK-Control with level sensor 1840/2020 30252021
TANK-Control with level sensor 2080/2260 30252041
TANK-Control with level sensor 2400/2580 30252051
Optional for all sprayer control systems
The ball valve can be sourced from an agricultural technology accessories shop.
TANK Control accessories Item no.
2 Extension cable 6 m for sensors with AMP connector to junction box, required for connection to junction box 30303295
3 Operating device fi llstop for job computer, with 6-pin AMP connector for ball valve 30252820
TANK-Control
44
1
1 2 3
TANK-Control II
1
5
2 3 4
Agitator
Fillstop Filling pump
Plant protection . Control and monitoring systems
Optional for 30252110 Item no.
5 ISOBUS cable harness for EDS and TANK-Control II, 6 m cable 30303087
TANK-Control Item no.
1 Operating unit with AMP connector 30252060
2
TANK-Control II 1440/1620, sensor with AMP connector 30252062
TANK-Control II 1600/1780, sensor with AMP connector 30252064
TANK-Control II 1840/2020, sensor with AMP connector 30252066
TANK-Control II 2080/2260, sensor with AMP connector 30252068
TANK-Control II 2400/2580, sensor with AMP connector 30252070
3 Cable harness with fi llstop 30252076
4 ISOBUS cable harness for TANK-Control, 7 m cable 30252110
45
2
3
14 . 5
Plant protection . Control and monitoring systems
ISOBUS TRAIL-Control
46
23
5.10
12 11
67
4.9
1
4.91
5.10 6 7 11
2 3
6 7
ISOBUS TRAIL-Control stand-alone solution Item no.
1 ISOBUS job computer TRAIL-Control stand-alone 30322332
2
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
3Junction box for ISOBUS TRAIL-Control, 4 m cable 30322365
Junction box for ISOBUS TRAIL-Control, 9 m cable 30322367
4 Gyroscope with 2x bracket, with AMP connector 30303685
5 Angle sensor with AMP connector, without cable, with rod 30303675
6 Sensor X, trailed sprayer, 6 m cable without connector with 12 magnets 312583
7 Sensor Y, 1 m cablewith AMP connector without installation material 31302506
TRAIL-Control as an option for job computer MIDI 3.0 and MAXI 3.0 Item no.
ISOBUS TRAIL-Control
30303015
9 Gyroscope with 2x bracket, with AMP connector
10 Angle sensor with AMP connector, without cable, with rod
Optional Item no.
11 Electronic slope sensor with 1 m cable and AMP connector 30303690
12 Proportional valve 302922
A connector cable is required for sensors and gyroscope Item no.
13
Connector cable, 2 m, for sensors, with 3-pin AMP socket to junction box 30303294
Connector cable, 4 m, for sensors, with 3-pin AMP socket to junction box 30303296
Connector cable, 6 m, for sensors, with 3-pin AMP socket to junction box 30303295
Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
47
12 13
Plant protection . Control and monitoring systems
ISOBUS DISTANCE-Control Item no.
1 ISOBUS DISTANCE-Control with 2 ultrasonic sensors, with 2 slope sensors
30303059
2 2 ultrasonic sensors
3 Connector cable, ultrasonic sensor, 20 m
4 Accessories bag for boom control
5 Angle sensor with AMP connector, without cable, with rod
6 2 electronic slope sensors with 1 m cable and AMP connector
ISOBUS DISTANCE-Control Item no.
1 ISOBUS DISTANCE-Control with 2 ultrasonic sensors, with 1 slope sensor
30303058
2 2 ultrasonic sensors
3 Connector cable, ultrasonic sensor, 20 m
4 Accessories bag for DISTANCE-Control
5 Angle sensor with AMP connector, without cable, with rod
6 Electronic slope sensor with 1 m cable and AMP connector
ISOBUS DISTANCE-Control
48
2
3
3
6
6
5
2
2
6
3 4 5
Plant protection . Control and monitoring systems
1
5
2
6
3
3
41 22
ISOBUS DISTANCE-Control II Item no.
1 DISTANCE-Control II job computer 30303165
2
Connector cable, main to add-on job computer, 0.3 m 30322355
Connector cable, main to add-on job computer, 1.5 m 30322359
Connector cable, main to add-on job computer, 3.2 m 30322358
Connector cable, main to add-on job computer, 6.5 m 30322357
Connector cable, main to add-on job computer, 10 m 30322356
3 Junction box for DISTANCE-Control II, 4 m 30303167
4 Ultrasonic sensor 30217515
5 Connector cable, ultrasonic sensor, 20 m 31303050
6 Angle sensor with AMP connector, without cable, with rod 30303675
7
Connector cable, 2 m, for sensors, with 3-pin AMP socket to junction box 30303294
Connector cable, 4 m, for sensors, with 3-pin AMP socket to junction box 30303296
Connector cable, 6 m, for sensors, with 3-pin AMP socket to junction box 30303295
Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
ISOBUS DISTANCE-Control II
49
12
3
4
5
66
5
4
4
Plant protection . Control and monitoring systems
SECTION-Control TOP
EDS job computer Item no.
1 EDS communication module 3030308530
Optional for MAXI
50
13
1 2 3
EDS equipment Item no.
2
EDS module, quadruple, 4 mm air Quattro, for quadruple nozzle mount, cable length 2x 0.35 m 30303083
EDS module, quadruple, 4 mm air Quattro, for single nozzle mount, cable length 2x 1.1 m 3030308301
EDS module, quadruple, 4 mm air Quattro, for double nozzle mount, cable length 2x 0.6 m 3030308302
EDS module, quadruple, 6 mm air Quattro, for single nozzle mount, cable length 2x 1.1 m 3030308303
EDS module, quadruple, 6 mm air Quattro, for double nozzle mount, cable length 2x 0.6 m 3030308304
EDS module, quadruple, 6 mm air Quattro, for quadruple nozzle mount, cable length 2x 0.35 m 3030308305
3
Extension cable, 0.85 m, with 10-pin socket / 10-pin connector 3030308320
Extension cable, 1.35 m, with 10-pin socket / 10-pin connector 3030308321
Extension cable, 2.35 m, with 10-pin socket / 10-pin connector 3030308322
51
2
Field sprayer . Control and monitoring systems
SECTION-Control BOX
52
1 2
1 2
The following SECTION-Control BOX versions are available:
2
SECTION-Control BOX for SPRAYDOS motorized valves 30302670*
SECTION-Control BOX for SPRAYDOS solenoid valves 30302671*
SECTION-Control BOX for switch box, 30-pin, motorized valve 30302672*
SECTION-Control BOX for switch box, 30-pin, solenoid valve 30302673*
SECTION-Control BOX for switch box, 39-pin, motorized valve 3030267201*
SECTION-Control BOX for switch box, 39-pin, solenoid valve 3030267301*
SECTION-Control BOX for switch box, DAMMANN motorized valve 3030267202*
SECTION-Control BOX for switch box, DAMMANN solenoid valves 3030267302*
SECTION-Control BOX for switch box, INUMA 3030267303*
SECTION-Control BOX for switch box, HARDI HC2500 / HC5500 motorized valve with 1-7 sections and special functions 3030267203*
SECTION-Control BOX for switch box, HARDI HC2500 / HC5500 motorized valve with 1-9 sections, without special functions 3030267204*
SECTION-Control BOX for John Deere EL-4 spray computer 3030267207*
SECTION-Control BOX for BERTHOUD DP Tronic spray computer 3030267205*
SECTION-Control BOX for spray computer, TeeJet 844 3030267207*
SECTION-Control BOX for AMASPRAY +, with 5 sections 30302674*
SECTION-Control BOX for AMASPRAY +, with 7 sections 3030267401*
SECTION-Control BOX for AMASPRAY +, with 9 sections 3030267402*
Additional costs for conversion of SECTION-Control BOX (if required) 30302675
Additional costs for adjusting switch box to wheel signal (if required) 3030267501
Additional costs for adjusting switch box with fixed connector cable 3030267502
SECTION-Control BOX Item no.
1TRACK-Guide II with basic vehicle harness and DGPS receiver A101 3030271000*
TRACK-Guide III with DGPS receiver A101, camera ports and basic vehicle harness 3030271412*
SECTION-Control App 30302450
*...designed for the retrofit market 53
Seeders and Planters
ISOBUS DRILL-Controller
54
2
1
35 6
78
9
11
12
13
14
15 . 16
19 . 2017 . 18
1
10
4
6
13
2
7
14
3
85 . 9
11. 12
ISOBUS seeder Item no.
1 ISOBUS job computer ECU-MIDI 3.0 for seeders 30285011
2
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
3 Cable harness, ISOBUS seeder 30285030
4 Junction box, 1.5 m 30285100
5,9 Rotational speed sensor with AMP connector 30303623
6 Radar sensor, 1 m cable with AMP connector 30258321
7 Calibration button with AMP connector 30285080
8 Electrical metering drive 30285050
10 Connector cable for electrical metering drive to junction box, 2 m 30285055
11,12 Level sensor, 1 m cable, with AMP connector 30303650
13 Working position sensor, 1 m cable, with AMP connector 30303615
14 Half-width motor 30285070
Outputs for
15.16 Tramline valve
17.18 Bout marker
19.20 Pre-emergence marker
55
Seeders and Planters
DRILL-Control Item no.
1 DRILL-Control 30283620
DRILL-Control
DRILL-Control equipment Item no.
2 Cable harness, DRILL-Control 30283625
3, 7 Rotational speed sensor with AMP connector 30303623
4 Radar sensor, 1 m cable with AMP connector 30258321
5 Calibration button with AMP connector 30285080
6 Electrical metering drive 30285050
8, 9 Radar sensor, 1 m cable with AMP connector 30303650
10 Working position sensor, 1 m cable with AMP connector 30303615
Outputs for
11,12 Tramline valve
13,14 Bout marker
15,16 Pre-emergence marker
56
1
2
3
8
5
9 6
10
11 . 12
15 . 16
13 . 14
4
1
5
2
6
3 . 7
8 . 9
4
10
DRILLMAT III Item no.
1 DRILLMAT – computer with console and battery cable 30283615
Seeder equipment Item no.
2
Cable harness for tramline control (motorized fl ap) with sensors, 6.7 m 30283710
Cable harness for tramline control (motorized fl ap) with sensors, 12 m 30283715
Cable harness for tramline control (solenoid fl ap) with sensors, 6.7 m 30283711
Cable harness for tramline control (solenoid fl ap) with sensors, 12 m 30283716
Scope of delivery:- Bout marker position sensor (6, 7) - Level sensor (4)- Wheel sensor (5)- Metering shaft sensor (9)- Fan sensor (3)
Outputs for:- Pre-emergence marker (8)- Left tramline (10)- Right tramline (11)
1
2
3
4
5
9
10 . 11
86 . 7
1 2
Seeders and Planters
DRILLMAT III
57
Seeders and Planters
ISOBUS PLANTER-Controller
58
1 2 3 4
5 76 8
9 10 11 12
13 1514 17
2
1
6
3
5
8
94
13
1210
1188
7
ISOBUS precision planters Item no.
1 ISOBUS job computer ECU-MIDI 3.0 for precision planters 30285011
2
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
3 Junction box, 1.5 m 30285100
4 Working position sensor, 1 m cable, with AMP connector 30303615
5 Rotational speed sensor with AMP connector 30303623
6 Radar sensor, 1 m cable with AMP connector 30258321
7
Connector cable, 2 m, for sensors, with 3-pin AMP socket to junction box 30303294
Connector cable, 4 m, for sensors, with 3-pin AMP socket to junction box 30303296
Connector cable, 6 m, for sensors, with 3-pin AMP socket to junction box 30303295
Connector cable, 7 m, for sensors, with 3-pin AMP socket to junction box 3030329605
Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
Connector cable, 10 m, for sensors, with 3-pin AMP socket to junction box 3030329705
Connector cable, 12 m, for sensors, with 3-pin AMP socket to junction box 30303298
Connector cable, 20 m, for sensors, with 3-pin AMP socket to junction box 30303289
8 ERC module (Electronic Row Control module) 30284049
9 ERC cable harness 30284054
10 ERC connector cable 30284059
11 ERC with CAN connector cable 3028405901
12 ERC module connector cable 30284055
13 ERC module connector cable 3028405601
14 AMP dummy connector, 2-pin (on cable harness) 31300539
15 AMP dummy connector, 3-pin (on cable harness) 31300540
16 Dust protection cap, 10-pin 31300546
17 Protective cap for rows without coupling 3028407000
59
Seeders and Planters
PRECIMAT
1 32 4
1
4
52.3
60
PRECIMAT Item no.
1 PRECIMAT computer 30283650
2Junction box for machines without a row shutoff system, up to 12 rows, 6.5 m 30283701
Junction box for machines without a row shutoff system, up to 12 rows, 10 m 30283702
3Junction box for machines with a row shutoff system, up to 12 rows, 6.5 m 30283705
Junction box for machines with a row shutoff system, up to 12 rows, 10 m 30283706
4 PTO rpm sensor with AMP connector 30303623
5
Connector cable, 1.10 m, for sensors, with 3-pin AMP socket to junction box 3030329706
Connector cable, 2 m, for sensors, with 3-pin AMP socket to junction box 30303294
Connector cable, 4 m, for sensors, with 3-pin AMP socket to junction box 30303296
Connector cable, 6 m, for sensors, with 3-pin AMP socket to junction box 30303295
61
Fertilization
ISOBUS SPREADER-Controller
1
5
2
6
3
7
4
6
5
1
24
7
3
62
ISOBUS fertilizer spreaders Item no.
1 ISOBUS job computer ECU-MIDI 3.0 for fertilizer spreaders 30295006
2 Junction box for fertilizer spreaders, 1.5 m 30295015
3
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
4 Radar sensor, 1 m cable with AMP connector 30258321
5
Connector cable, 4 m, for sensors, with 3-pin AMP socket to junction box 30303296
Connector cable, 6 m, for sensors, with 3-pin AMP socket to junction box 30303295
Connector cable, 7 m, for sensors, with 3-pin AMP socket to junction box 31303677
Connector cable, 8 m, for sensors, with 3-pin AMP socket to junction box 30303297
Connector cable, 10 m, for sensors, with 3-pin AMP socket to junction box 3030329705
Connector cable, 12 m, for sensors, with 3-pin AMP socket to junction box 30303298
Connector cable, 20 m, for sensors, with 3-pin AMP socket to junction box 30303289
6 Level sensor, 1 m cable, with AMP connector 30303650
7 Inductive sensor, 1 m cable with AMP connector, 8 mm switching distance 30303631
63
Fertilization
With ISOBUS-TC,
SECTION-Control, VRC
ISOBUS SLURRY-Controller
1
5 7
2
6 8
3 4
64
3 214
75
8
6
Accessories Item no.
9
Connector cable, main to add-on job computer, 0.3 m 30322355
Connector cable, main to add-on job computer, 1.5 m 30322359
Connector cable, main to add-on job computer, 3.2 m 30322358
Connector cable, main to add-on job computer, 6.5 m 30322357
Connector cable, main to add-on job computer, 10 m 30322356
SLURRY-Controller Item no.
1 ISOBUS job computer ECU-MIDI 3.0 for slurry tankers* 30322453
2 Junction box, 0.5 m 30322460
3
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
4 Actuator (linear actuator) 302130
5 Sensor X, speed, 6 m cable without connector, 12 magnets 312583
6 Sensor Y, working position, 5 m cable without connector, with installation equipment 312586
7 Rotational speed sensor for monitoring the pump speed, 6 m cable without connector, with installation equipment 302580
8
Magnetic / inductive fl ow meter, DN 100 Measurement range 0.3 - 4 cbm/min 30212611
Magnetic / inductive fl ow meter, DN 125 Measurement range 0.4 - 6 cbm/min 30212621
Magnetic / inductive fl ow meter, DN 150 Measurement range 0.5 - 8 cbm/min 30212631
Magnetic / inductive fl ow meter, DN 200 Measurement range 0.8 - 12 cbm/min 30212641
9
* System can be expanded with up to seven additional job computers
65
Fertilization
12V
SPRAYMAT II for slurry tankers
66
4
3
21
21
6
3
7
4
5
Slurry tanker equipment, measurement of the application rate for pump drive Item no.
2
SPRAYMAT II equipment for slurry tanker Scope of delivery: - Junction box - Sensor X, wheel / drive shaft - Sensor Y, operating position- Battery cable / mounting bracket 302120
3 Inductive sensor NPN-M, 12 x 60 mm LED, 6 m cable, 4 mm switching distance, without connector 312162
Flow meter Item no.
4
Magnetic / inductive flow meter, DN 100 Measurement range 0.3 - 4 cbm/min 30212611
Magnetic / inductive flow meter, DN 125 Measurement range 0.4 - 6 cbm/min 30212621
Magnetic / inductive flow meter, DN 150 Measurement range 0.5 - 8 cbm/min 30212631
Magnetic / inductive flow meter, DN 200 Measurement range 0.8 - 12 cbm/min 30212641
Tractor / combine harvester harness, additional sensor technology for basic equipment Item no.
5SPRAYMAT II equipment as hectare counter without RPM monitor Scope of delivery: - Sensor Y, working position, 5 m cable 302742
6
SPRAYMAT II equipment as hectare counter on tractor with 1 RPM monitor (PTO) Scope of delivery: - Sensor Y, working position, 5 m cable- Sensor A, RPM PTO, 6 m cable 302743
7
SPRAYMAT II equipment as hectare counter for combine harvester with 1 RPM monitor Scope of delivery: - Sensor Y, working position, 5 m cable- Sensor A, RPM, 12 m cable 302748
SPRAYMAT II Item no.
1 Spraymat II – computer with bracket 30272010
67
Fertilization
1
5 7
2
6
3 4
ISOBUS UNI SPREADER-Controller
Accessories Item no.
7
Connector cable, main to add-on job computer, 0.3 m 30322355
Connector cable, main to add-on job computer, 1.5 m 30322359
Connector cable, main to add-on job computer, 3.2 m 30322358
Connector cable, main to add-on job computer, 6.5 m 30322357
Connector cable, main to add-on job computer, 10 m 30322356
UNI SPREADER-Controller Item no.
1 ISOBUS job computer ECU-MIDI 3.0 for slurry tankers * 30322454
2 Junction box, 0.5 m 30322460
3
Connector cable, ISOBUS job computer, 1 m 3030314301
Connector cable, ISOBUS job computer, 2.5 m 3030314601
Connector cable, ISOBUS job computer, 4 m 3030314401
Connector cable, ISOBUS job computer, 5.5 m 3030314801
Connector cable, ISOBUS job computer, 6.5 m 3030314001
Connector cable, ISOBUS job computer, 8.5 m 3030314201
Connector cable, ISOBUS job computer, 11 m 3030314101
Connector cable, ISOBUS job computer, 14 m 3030314701
4 Sensor X, speed, 6 m cable without connector, 12 magnets 312583
5 Sensor Y, working position, 5 m cable without connector, with installation equipment 312586
6 Rotational speed sensor, 6 m cable without connector, with installation equipment 302580
* System can be expanded with an additional job computer68
4
6
6
5
3
1 26
1
Fertilization
1
5
2
6
3 4
UNI SPREAD-Control
UNI SPREAD-Control Item no.
1 UNI SPREAD-Control 30286010
2 Junction box, 6.5 m 30286011
3 Sensor X, speed, 6 m cable without connector, 12 magnets 312583
4 Sensor Y, working position, 5 m cable without connector, with installation equipment 312586
5 Rotational speed sensor, 6 m cable without connector, with installation equipment 302580
69
2
35
4
ISOBUS terminal Item no.
ISOBUS terminal bracket 31322505
ISOBUS terminal connector cable, without tractor job computer 31322550
Tractor job computer with battery cable and ISOBUS socket 31322560
Connector cable for tractor job computer to signal socket ISO 11786 31322562
Connector cable for tractor job computer with junction box 31322567
Bracket for joystick 31302015
Connector cable for tractors with ISOBUS in-cab connector 31322541
USB memory device, 2 GB, blue, for ME terminals up to hardware version 3.0.0 3032258905
USB memory device, 4 GB, black, for ME terminals as of hardware version 3.0.0 and TOUCH1200® 3032258915
Extension cablewith 9-pin Sub-D connector for ME terminal to ISOBUS basic vehicle harness 30322571
Precision Farming Item no.
Connector cable A100/A101 with speed output for the terminal 31302457
Y cable for A100 / A101 connection to two terminals 31302459
Connector cable for A100/A101, 6 m for serial interface 31302462
Connector cable for A100/A101, 12 m for serial interface 31302468
Connector cable for AG-STAR, 6 m for serial interface 31302478
Replacement VHF radio antenna, with spring 3130248910
Replacement UHF radio antenna, with spring 3130248911
Magnetic pedestal for UHF / VHF radio antenna 3130248915
Suction bracket with mounting bracket 31302471
Suction bracket without mounting bracket 31302472
Magnetic pedestal with bolt for A100 / A101 31302466
SPRAYDOS Item no.
Mounting bracket 312075
Bracket 31321105
SPRAYMAT II / UNIMAT II Item no.
Bracket 1 Spraymat / Unimat (upper part) 312074
Bracket for SPRAYMAT II / UNIMAT II (upper part) 31322505
Mounting bracket-1 for SPRAYMAT II / UNIMAT II (lower part) 312075
Connector, 20-pin 312497
Sensor Y, SPRAYMAT II / UNIMAT II hectare counter with 5 m cable 312742
Sensor Y, SPRAYMAT II / UNIMAT II hectare counter with 10 m cable 312730
Spare parts
70
UNI-Control S, SPRAY-Control S, AMATRON II A Item no.
Adaptor for computer up to ’93 (UNI-Control and Spraycontrol Il) to switch box S with bracket S 312235
Bracket S with bracket profile slide 312226
Mounting bracket 312075
Adaptor for switch boxes up to ’93 to computers as of ’94 (UNI-Control S / SPRAY-Control S) 312237
Tractor junction box, S Standard, with sensor X 312240
Sensor X, drive shaft / wheel, 6 m cable with 12-pin connector, without installation equipment 312265
Connector cable ISO-11786 for connection to signal socket with 12-pin connector 312243
Retrofitting of serial input RS-232 for UNI-Control S and Amatron II A for GPS-Displayplus installation 30253150
Retrofitting of serial output for UNI Control S and Amatron II A for connection to a printerplus installation 30253160
ISOBUS terminal / LBS-Control Item no.
Mounting bracket 312075
LBS / ISO socket 31300405
LBS / ISO connector 31300400
Spare parts for machines with cable harness Item no.
Angle sensor 30303675
Gyroscope without bracket 31303160
Bracket for gyroscope 31303161
Sensor X, drive shaft / wheel, 1 m cable with AMP connector, without installation equipment 31302006
Sensor Y, 1 m cable with AMP connector, without installation material 31302506
Inductive sensor 12 mm, 1 m cable with AMP connector, 4 mm switching distance 30303625
Inductive sensor 18 mm, 1 m cable with AMP connector, 8 mm switching distance 30303631
Level sensor, 1 m cable with AMP connector 30303650
Ultrasonic sensor Microsonic for rod control 30217515
Cap for 42-pin connector to cable harness 31300554
71
Universal sensors spare parts Item no.
Sensor X, drive shaft / wheel, 6 m cable without connector, for junction box, without installation equipment 312600
Sensor X, drive shaft / wheel, 10 m cable without connector, for junction box, without installation equipment 312601
Sensor X, drive shaft / wheel, 6 m cable without connector, for junction box, with installation equipment 312580
Sensor X, drive shaft / wheel, 6 m cable with connector, without installation equipment 312084
Sensor X, drive shaft / wheel, 6 m cable with connector, with installation equipment 312083
Sensor X, wheel, 10 m cable with connector, without installation equipment 312086
Sensor X, wheel, 10 m cable with connector, with installation equipment with 12 magnets (trailed sprayer) 312085
Sensor X, trailed sprayer, 6 m cable without connector with 12 magnets, complete 312583
Sensor X, forwards / rearwards detection, 12 m cable without connector, without installation equipment 312082
Sensor X, forwards / rearwards detection, 12 m cable with connector, with installation equipment 312081
Sensor Y, working position, 5 m cable without connector, for implement junction box, without installation materials 312606
Sensor Y, working position, 5 m cable without connector, for implement junction box, with installation materials 312586
Sensor Y, working position, 5 m cable with connector, without installation equipment 312090
Sensor Y, working position, 5 m cable with connector, with installation equipment 312089
RPM sensor, 8 m cable without connector, for implement junction box, without installation equipment 312613
Inductive sensor 12 mm, 6 m cable without connector 312162
Inductive sensor 18 mm, 6 m cable without connector 312164
Sensor X accessories bag, cardan 312112
AMP connector Item no.
AMP connector, 2-pin, for sensor 31300560
AMP socket, 2-pin, for sensor 31300570
AMP dummy connector, 2-pin (on cable harness) 31300539
AMP connector, 3-pin, for sensor 31300561
AMP socket, 3-pin, for sensor 31300571
AMP dummy connector, 3-pin (on cable harness) 31300540
AMP connector, 4-pin, for sensor 31300562
AMP socket, 4-pin, for sensor 31300572
AMP dummy connector, 4-pin (on cable harness) 31300541
AMP connector, 5-pin, for sensor 31300563
AMP connector, 42-pin, complete, for job computer 31300545
AMP socket casing, 16-pin, complete, for job computer 31300552
Testers/tools for AMP connector Item no.
Service case 30309980
Crimping pliers and dent-levelling tool 30309990
Test device for cable harness 30309960
Test device for Super Seal connector sensor 30309950
Spare parts
72
Universal adaptor cable spare parts Item no.
Adaptor cable for signal socket in accordance with DIN 9684.1 (7-pin) KHD, UNIMOG (Unicomp), FENDT, John Deere, Case-Steyr 312662
Adaptor cable for FENDT signal socket (4-pin), for junction box 312660
Adaptor cable for signal socket in accordance with DIN 9684.1 (7-pin) for junction box KHD, UNIMOG (Unicomp), FENDT, John Deere, Case-Steyr junction boxes, with 3-pin connector 312120
Adaptor for FENDT signal socket (4-pin) with 3-pin connector 312123
Adaptor for MB-Trac, with electronic km/h display and 3-pin connector 312125
Speedometer adaptor UNIMOG, 5 m cable, with 3-pin connector 312087
UNIMOG speedometer adaptor, 5 m without connector 312670
Inductive transmission sensor JCB 31225010
Flow meter / pressure sensor / TANK-Control spare parts Item no.
Pressure gauge (LCD 4-digit) without pressure sensor 312430
Pressure gauge with key, without pressure sensor 31243010
Pressure sensor 9 m, 0 - 50 bar 312428
Pressure sensor 1 m, 0 - 16 bar with AMP connector 30303591
Polmac 1" flow meter, without sensor and mounting parts 312440
Polmac 2" flow meter, without sensor and mounting parts 312445
TANKMETER display device 312509
Sensor for Polmac 1", spare flow meter 312446
Sensor for Polmac 1", spare flow meter with AMP connector 31244610
Sensor for Polmac 2", spare flow meter 31244710
Polmac 1" flow meter, spare parts without turbine wheel 312450
Polmac 1" flow meter, Turbo-Flow spare parts without turbine wheel 31245010
Polmac 1" flow meter, spare turbine wheel 312451
Polmac 2" flow meter, spare turbine wheel 312456
Polmac 2" flow meter, spare parts without turbine wheel 312457
Fan wheel for Bürkert Inline (from 2000) 31244420
Electronics for Bürkert Inline (from 2000) 31244415
TANK-Control display unit 31252000
TANK-Control design foil 31252100
73
General spare parts Item no.
3-pin connector (sensor) 312142
3-pin coupling socket (sensor) 312143
Battery cable, 2 x 4 qmm, 5 m cable as of 03/96, with 3-pin connector 312154
Battery cable, 2 x 4 qmm, 5 m cable with 2 sockets 31215450
Line connector, 4 qmm, 25 A 31320910
Line connector, 6 qmm, 50 A 31320915
Magnet with screw V2A 312140
Clamp, 27/51 mm with 1 magnet for drive shaft 312136
Clamp, 50/70 mm with 1 magnet for drive shaft 312137
Clamp, 27/51 mm with 2 magnets for RPM monitor 312139
PTO shaft plate, complete with magnet and screw 312135
Installation power socket from 1/91 for battery cable (socket) 312156
Equipment connector from 1/91 for computer (tacks) 312157
Solenoid valve/manifold spare parts Item no.
Solenoid valve, Tecnoma (with free-wheeling diode) 312351
ARAG filter 1 - 1/4" with nozzles, 50 mesh sieve 312360
Control ball valve, electric 31238110
Free-wheel diode, solenoid valve 312399
Motorized valve/manifold spare parts Item no.
Filter for ARAG manifold with sieve insert 31236010
ARAG section valve 31236110
ARAG control valve, flow up to 160 l/min 31236115
ARAG control valve, flow up to 250 l/min 31236116
ARAG regulating component, flow up to 250 l/min 31235803
ARAG bypass valve, flow up to 160 l/min 31236120
ARAG bypass valve, flow up to 250 l/min 31236121
Spare parts
74
Manifold / switch box spare parts Item no.
Relay circuit board for switch box with circuit board, up to 12/91, 4 relays, cable with ferrule 312308
Relay circuit board for switch box without circuit board, up to 12/91, 4 relays, terminal block 312310
Relay circuit board for switch box with circuit board, as of 01/92, 2 relays, cable with ferrule 312306
Relay circuit board for switch box without circuit board, as of 01/92, 2 relays, terminal block 312303
Neoprene cap with synthetic plate for keys and switches 326680
16-pin aluminium coupling 312498
20-pin connector 312497
24-pin aluminium coupling 302470
30-pin connector with protective cap 312499
30-pin female multipoint connector (complete) 31249901
39-pin connector with protective cap 31249905
39-pin female multipoint connector (complete) 31249910
40-pin coupling 302490
64-pin coupling 31249810
Switch for switch box S2 or SPRAYDOS, can be used as section main switch, section switch, on/off switch 31247300
Switch for switch box S2 or SPRAYDOS, with centre position (e.g. for foam marker) 31247305
Key for switch box S2 or SPRAYDOS for hydraulics (control +/-) 31247310
Switch, 2-pin, 6 A (large), section switch, ON/OFF, manual/automatic 31247350
Switch 1-pin, 6 A (large), commutator 31247355
Switch, 2-pin, 20 A (large), section main switch 31247360
Switch, 1-pin, 15 A (large), centre position 31247365
Switch 1-pin, 15 A (large), switch box ON/OFF 31247370
Switch 2-pin, 10 A (large), +/- control 31247375
75
Your local authorized dealer
Müller-Elektronik GmbH & Co. KG
Franz-Kleine-Straße 18 . 33154 Salzkotten . Germany
Phone +49(0)5258 9834-0 . Fax +49(0)5258 9834-90
[email protected] . www.mueller-elektronik.de
10/15 . 1. Publications, subject to change.