Transcript
Page 1: Planet earth metamorphic_rocks_powerpoints

1

Metamorphic Rocks and

Crustal Deformation

Page 2: Planet earth metamorphic_rocks_powerpoints

2

Metamorphism

All rocks on the planet originally derived from igneous rocks. As we know there are a few select silicate minerals that are common in igneous rocks. (quartz, feldspar, augite, hornblende, mica, olivine).

There are however a vast majority of uncommon silicate minerals (thousands of them). Where did they come from?

Page 3: Planet earth metamorphic_rocks_powerpoints

3

Summary of Metamorphism

Metamorphism involves changing rocks in the SOLID state through extremely high temperatures and/or pressures.

The extremely high pressures literally break atomic bonds and force them into NEW, more stable minerals. The chemical structure of the parent mineral can be converted into a totally new minerals which are stable at the higher pressures.

Metamorphic rocks are also more DENSE than their parent rock. Pressure and temperature force air pockets and water OUT of the parent, increasing the density of the metamorphic rock.

Metamorphic rocks are thus derivatives of their parent (the rock before metamorphism). The metamorphic rock minerals are made from the starting materials present from the parent rock—new elements cannot be added to the metamorphic rock. They are simply made from the ingredients present in the parent.

Page 4: Planet earth metamorphic_rocks_powerpoints

4

Agents of Metamorphism

Parent Rock: Mineralogy of the metamorphic rock is controlled by the mineralogy of the parent. Rarely new elements are introduced (just rearrange the atoms that are there currently, or squeeze ions out that happen to be dissolved in water).

Temperature: Recall that every mineral is stable at a certain temperature (Bowen’s reaction series as an example). Minerals unstable at high temperature will form new ones. (Clay is unstable at high temps, but micas are).

Page 5: Planet earth metamorphic_rocks_powerpoints

5

Agents of MetamorphismPressure: Two

types, confining (applied equally in all directions) and directed (pressure in a given direction forcing minerals to align perpendicular to the directed pressure). Directed pressure forms a foliated texture.

Page 6: Planet earth metamorphic_rocks_powerpoints

6

Confining pressure is pressure applied equally in all directions.

Directed pressure is pressure applied in a preferential direction. Directed pressure involves minerals aligning PERPENDICULAR to the direction of the pressure.

Page 7: Planet earth metamorphic_rocks_powerpoints

7

Agents of Metamorphism

Fluids: If water is present in between the pore spaces of minerals in the parent rock, it may be squeezed out, carrying with it dissolved ions that can be used to make another mineral elsewhere.

Page 8: Planet earth metamorphic_rocks_powerpoints

8

Types of Metamorphism

CONTACT METAMORPHISMHigh temperatures in ‘contact’ with surrounding rock tends to ‘bake’ the rock. Yields non-foliated textures (Appears as one mineral of equidimensional crystals). Zone of metamorphism is usually skinny and small forming a band around the intrusive igneous body.

Page 9: Planet earth metamorphic_rocks_powerpoints

9

Contact Metamorphism

Page 10: Planet earth metamorphic_rocks_powerpoints

10

Non-Foliated texture: form under higher temperature regimes (not so much ‘pressure’ related). Smaller crystals in the parent rock simply recrystallize into larger ones without being melted. They are more

dense than the parent rock. This is an example of marble (parent is limestone with the dominant mineral calcite). Because calcite is the dominant mineral in these

rocks, they will react to dilute hydrochloric acid.

Page 11: Planet earth metamorphic_rocks_powerpoints

11

Quartzite also comes in a variety of colors, depending on the parent rock (red sandstone, white sandstone etc.). Quartz is the dominant

mineral in quartzite.

Page 12: Planet earth metamorphic_rocks_powerpoints

12

Remember, quartzite was originally a sandstone that was ‘baked by higher temperatures and has a non-foliated texture. Below check out the rocks in thin section (under the microscope). The left is a sandstone, note the dark spaces

between the grains. The right is quartzite. Look at how closely packed the grains are. Removing the ‘spaces’ between the grains makes metamorphic rocks

DENSER than their parents.

Page 13: Planet earth metamorphic_rocks_powerpoints

13

Types of Metamorphism

REGIONAL METAMORPHISMMetamorphism caused by high temperatures and pressures (directed and confining) over large areas by ‘mountain building’ (orogenic) processes. Squeezing rocks in a particular direction will result in the minerals aligning perpendicular to that force. Most metamorphic rocks (quantitatively) are produced by tectonism and are located in the earth’s major mountain belts.

Regional metamorphism produces foliated texture. The more heat and pressure, the more ‘foliated’ the rocks appear (easier it is to see the minerals aligned.

Page 14: Planet earth metamorphic_rocks_powerpoints

14

Foliated Rocks are rocks that were metamorphosed by regional processes—high heat and temperature.

By looking at the degree of foliation, you can tell how much metamorphism took place.

This specimen of slate formed at lower temperatures and pressures. Minerals are just beginning to align perpendicular to the direction of the pressure. Slate can come in a variety of colors.

Page 15: Planet earth metamorphic_rocks_powerpoints

15

Slate (right): low grade regional metamorphism showing foliated

texture with parent of shale (left).

Page 16: Planet earth metamorphic_rocks_powerpoints

16

Add some more pressure to slate (right) and end up with phyllite (left).

Page 17: Planet earth metamorphic_rocks_powerpoints

17

Increasing the temperatures and pressures would force the minerals to recrystallize and align perpendicular to the

pressure. Mica crystals begin to form and they give PHYLLITE its sheen (can’t really see it here).

Page 18: Planet earth metamorphic_rocks_powerpoints

18

Increasing the pressures and temperatures even further causes the crystals to grow even larger and align even more.

SCHIST

Page 19: Planet earth metamorphic_rocks_powerpoints

19

An extremely high grade metamorphic rock that has undergone very high temperatures and pressures but didn’t melt is a rock called GNEISS. If

enough temperatures and pressures are applied the rocks behave plastically (recall the mantle) and can actually fold during mountain building events.

Gneiss has large minerals that have segregated into layers (gives its characteristic zebra pattern).

Page 20: Planet earth metamorphic_rocks_powerpoints

20

Different foliated metamorphic rocks will form under different temperature and pressure regimes. Starting with shale (sedimentary rock) as the parent, we can crank up the temperatures and pressures to form slate, phyllite, schist then gneiss. To form gneiss, the rock must pass through the other stages first. Note that the more pressure and higher the temperature, the larger the crystal size and the more ‘foliated’ the texture.

Page 21: Planet earth metamorphic_rocks_powerpoints

21

Page 22: Planet earth metamorphic_rocks_powerpoints

22

Index Minerals: The presence of a given mineral can indicate the maximum T and P the rock experienced. We can find a specific mineral in a metamorphic rock—knowing properties about those minerals, we can calculate the maximum temperatures and

pressures the rock was subjected to. For example, we will see minerals like garnet and biotite mica in schist. If we know the range of temperatures and pressures these

minerals are STABLE at, the temperature and pressure the rock formed under is where their ranges overlap.

Page 23: Planet earth metamorphic_rocks_powerpoints

23

Garnet Schist: Foliated rocks form under high pressures (accompanied by high temperatures). At

what temperature did this rock form?

Page 24: Planet earth metamorphic_rocks_powerpoints

24

Metamorphic Rocks Summary• Remember slate, phyllite, schist and gneiss all have

foliated texture. The larger the minerals, the higher the temperatures and pressures (generally).

• Foliated rocks can tell you the direction of pressure and the degree of metamorphism (or foliation) can tell you about the temperatures and pressures.

• Regional metamorphism is large scale and results from tectonism.

• The parent rock for slate, phyllite, schist and gneiss is shale (sedimentary rock), quartzite is quartz sandstone and marble is limestone (calcite).

• Non-foliated rocks form by ‘baking’ (primarily temperatures) from igneous intrusions in country rock.

• All metamorphic rocks are denser than their parents; the spaces between grains and water are removed.

Page 25: Planet earth metamorphic_rocks_powerpoints

25

Crustal Deformation

Tectonics produces mountains and metamorphic rocks but also deforms the crust forming geologic structures.

We will now look at how the crust becomes deformed as the result of tectonic activity.

Page 26: Planet earth metamorphic_rocks_powerpoints

26

Stress and Strain

Deformation causes a change in volume or shape of a rock body.

STRESS is the amount of force acting on a rock to change its shape or volume and the STRAIN is the actual change in shape or volume caused by the force (stress).

The more confining pressure (with increase in depth) the more PLASTIC the rock behaves.

Near the surface rocks behave elastically and will be have like ELASTIC causing faulting.

Page 27: Planet earth metamorphic_rocks_powerpoints

27

Stress

Confining PressureUniform in all directions (i.e. rocks

buried deep in the crust).Increases with depth.

Page 28: Planet earth metamorphic_rocks_powerpoints

28

StressStress Applied Unequally

Compressional stress

Tensional stressShear stress

Page 29: Planet earth metamorphic_rocks_powerpoints

29

Unequal Stress

Page 30: Planet earth metamorphic_rocks_powerpoints

30

Compressional Stress: Results in folding of layers of rocks indicating plastic behavior. Strain produces structures called anticlines and synclines.

Anticlines look like an A in cross section and synclines have a U shape. Usually anticlines and synclines (folds) form together. Rocks AT THE

EARTH’s surface are under such HIGH and CONSISTENT pressures that they can even behave PLASTICALLY and fold like taffy (note majority of crust

rocks behave elastically).

Page 31: Planet earth metamorphic_rocks_powerpoints

31

The axis of the fold (either anticline or

syncline) runs parallel with the

fold. In anticlines the limbs of the

fold dip down away from the fold axis.

In synclines the limbs dip up away from the fold axis.

Folding occurs over a long period of

time with slow and consistent

compressional stresses.

Page 32: Planet earth metamorphic_rocks_powerpoints

32

Strike and Dip: We can measure the degree of dipping beds from the

horizontal 0 degrees (90 degree dip occurs when

the rock layers are vertical).

If you pour water down dipping beds that is the

DIP measurement. Perpendicular to that is the STRIKE (compass

direction).Both strike and dip tell us the ‘attitude’ of rock

layers—(their orientation with respect to compass direction).

Page 33: Planet earth metamorphic_rocks_powerpoints

33

Strike and dip of anticlines and synclines.Note: erosion at the surface will expose different layers of

sedimentary rocks. In an ANTICLINE, what is the relative ages of rocks along the axis? In a syncline?

Page 34: Planet earth metamorphic_rocks_powerpoints

34

Overturned folds may occur when the anticline is overturned.

Page 35: Planet earth metamorphic_rocks_powerpoints

35

Anticlines and synclines can PLUNGE into the earth resulting in unequal weathering of these rock layers at the surface. We can tell what rock layers are doing INSIDE the crust, based on these

weathering patterns and the ‘attitude’ measurements.

Page 36: Planet earth metamorphic_rocks_powerpoints

36

Folding results when rocks behave plastically, but if near the surface, rocks will behave like elastic, they will FAIL

under stress. Failure results in fracture (faults).

Page 37: Planet earth metamorphic_rocks_powerpoints

37

Types of Faults

• Faults can be divided into several different types depending on the direction of relative displacement. There are 2 main categories.– Dip-slip faults-where the

displacement is vertical– Strike-slip faults-where

the displacement is horizontal.

• Relative displacement is largely a function of the type of tectonic stress the rock is under.

Page 38: Planet earth metamorphic_rocks_powerpoints

38

Normal Faulting

Occurs when the headwall

drops relative to

the footwall. Result of TENSION.

Page 39: Planet earth metamorphic_rocks_powerpoints

39

Blocks that are uplifted are called horsts and those thrown down form a valley like

structure called a graben.Fault Block Mountains.

Page 40: Planet earth metamorphic_rocks_powerpoints

40

Reverse Fault occurs when the headwall moves up relative to the footwall. Result of COMPRESSION.

Page 41: Planet earth metamorphic_rocks_powerpoints

41

Commonly large scale overthrust faults move layers of rock almost horizontally over one another (dip of the fault

is a small angle from the horizontal) near collision boundaries.

Page 42: Planet earth metamorphic_rocks_powerpoints

42

If the fault is vertical and movement of rocks relative to one another remains in the horizontal, this is a transform fault. Caused by shear stress.


Top Related